+ Changes between 1.1.1g and 1.1.1h [xx XXX xxxx]
+
+ *)
+
+ Changes between 1.1.1f and 1.1.1g [21 Apr 2020]
+
+ *) Fixed segmentation fault in SSL_check_chain()
+ Server or client applications that call the SSL_check_chain() function
+ during or after a TLS 1.3 handshake may crash due to a NULL pointer
+ dereference as a result of incorrect handling of the
+ "signature_algorithms_cert" TLS extension. The crash occurs if an invalid
+ or unrecognised signature algorithm is received from the peer. This could
+ be exploited by a malicious peer in a Denial of Service attack.
+ (CVE-2020-1967)
+ [Benjamin Kaduk]
+
+ *) Added AES consttime code for no-asm configurations
+ an optional constant time support for AES was added
+ when building openssl for no-asm.
+ Enable with: ./config no-asm -DOPENSSL_AES_CONST_TIME
+ Disable with: ./config no-asm -DOPENSSL_NO_AES_CONST_TIME
+ At this time this feature is by default disabled.
+ It will be enabled by default in 3.0.
+ [Bernd Edlinger]
+
+ Changes between 1.1.1e and 1.1.1f [31 Mar 2020]
+
+ *) Revert the change of EOF detection while reading in libssl to avoid
+ regressions in applications depending on the current way of reporting
+ the EOF. As the existing method is not fully accurate the change to
+ reporting the EOF via SSL_ERROR_SSL is kept on the current development
+ branch and will be present in the 3.0 release.
+ [Tomas Mraz]
+
+ *) Revised BN_generate_prime_ex to not avoid factors 3..17863 in p-1
+ when primes for RSA keys are computed.
+ Since we previously always generated primes == 2 (mod 3) for RSA keys,
+ the 2-prime and 3-prime RSA modules were easy to distinguish, since
+ N = p*q = 1 (mod 3), but N = p*q*r = 2 (mod 3). Therefore fingerprinting
+ 2-prime vs. 3-prime RSA keys was possible by computing N mod 3.
+ This avoids possible fingerprinting of newly generated RSA modules.
+ [Bernd Edlinger]
+
+ Changes between 1.1.1d and 1.1.1e [17 Mar 2020]
+ *) Properly detect EOF while reading in libssl. Previously if we hit an EOF
+ while reading in libssl then we would report an error back to the
+ application (SSL_ERROR_SYSCALL) but errno would be 0. We now add
+ an error to the stack (which means we instead return SSL_ERROR_SSL) and
+ therefore give a hint as to what went wrong.
+ [Matt Caswell]
+
+ *) Check that ed25519 and ed448 are allowed by the security level. Previously
+ signature algorithms not using an MD were not being checked that they were
+ allowed by the security level.
+ [Kurt Roeckx]
+
+ *) Fixed SSL_get_servername() behaviour. The behaviour of SSL_get_servername()
+ was not quite right. The behaviour was not consistent between resumption
+ and normal handshakes, and also not quite consistent with historical
+ behaviour. The behaviour in various scenarios has been clarified and
+ it has been updated to make it match historical behaviour as closely as
+ possible.
+ [Matt Caswell]
+
+ *) [VMS only] The header files that the VMS compilers include automatically,
+ __DECC_INCLUDE_PROLOGUE.H and __DECC_INCLUDE_EPILOGUE.H, use pragmas that
+ the C++ compiler doesn't understand. This is a shortcoming in the
+ compiler, but can be worked around with __cplusplus guards.
+
+ C++ applications that use OpenSSL libraries must be compiled using the
+ qualifier '/NAMES=(AS_IS,SHORTENED)' to be able to use all the OpenSSL
+ functions. Otherwise, only functions with symbols of less than 31
+ characters can be used, as the linker will not be able to successfully
+ resolve symbols with longer names.
+ [Richard Levitte]
+
+ *) Corrected the documentation of the return values from the EVP_DigestSign*
+ set of functions. The documentation mentioned negative values for some
+ errors, but this was never the case, so the mention of negative values
+ was removed.
+
+ Code that followed the documentation and thereby check with something
+ like 'EVP_DigestSignInit(...) <= 0' will continue to work undisturbed.
+ [Richard Levitte]
+
+ *) Fixed an an overflow bug in the x64_64 Montgomery squaring procedure
+ used in exponentiation with 512-bit moduli. No EC algorithms are
+ affected. Analysis suggests that attacks against 2-prime RSA1024,
+ 3-prime RSA1536, and DSA1024 as a result of this defect would be very
+ difficult to perform and are not believed likely. Attacks against DH512
+ are considered just feasible. However, for an attack the target would
+ have to re-use the DH512 private key, which is not recommended anyway.
+ Also applications directly using the low level API BN_mod_exp may be
+ affected if they use BN_FLG_CONSTTIME.
+ (CVE-2019-1551)
+ [Andy Polyakov]
+
+ *) Added a new method to gather entropy on VMS, based on SYS$GET_ENTROPY.
+ The presence of this system service is determined at run-time.
+ [Richard Levitte]
+
+ *) Added newline escaping functionality to a filename when using openssl dgst.
+ This output format is to replicate the output format found in the '*sum'
+ checksum programs. This aims to preserve backward compatibility.
+ [Matt Eaton, Richard Levitte, and Paul Dale]
+
+ *) Print all values for a PKCS#12 attribute with 'openssl pkcs12', not just
+ the first value.
+ [Jon Spillett]
+
+ Changes between 1.1.1c and 1.1.1d [10 Sep 2019]
+
+ *) Fixed a fork protection issue. OpenSSL 1.1.1 introduced a rewritten random
+ number generator (RNG). This was intended to include protection in the
+ event of a fork() system call in order to ensure that the parent and child
+ processes did not share the same RNG state. However this protection was not
+ being used in the default case.
+
+ A partial mitigation for this issue is that the output from a high
+ precision timer is mixed into the RNG state so the likelihood of a parent
+ and child process sharing state is significantly reduced.
+
+ If an application already calls OPENSSL_init_crypto() explicitly using
+ OPENSSL_INIT_ATFORK then this problem does not occur at all.
+ (CVE-2019-1549)
+ [Matthias St. Pierre]
+
+ *) For built-in EC curves, ensure an EC_GROUP built from the curve name is
+ used even when parsing explicit parameters, when loading a serialized key
+ or calling `EC_GROUP_new_from_ecpkparameters()`/
+ `EC_GROUP_new_from_ecparameters()`.
+ This prevents bypass of security hardening and performance gains,
+ especially for curves with specialized EC_METHODs.
+ By default, if a key encoded with explicit parameters is loaded and later
+ serialized, the output is still encoded with explicit parameters, even if
+ internally a "named" EC_GROUP is used for computation.
+ [Nicola Tuveri]
+
+ *) Compute ECC cofactors if not provided during EC_GROUP construction. Before
+ this change, EC_GROUP_set_generator would accept order and/or cofactor as
+ NULL. After this change, only the cofactor parameter can be NULL. It also
+ does some minimal sanity checks on the passed order.
+ (CVE-2019-1547)
+ [Billy Bob Brumley]
+
+ *) Fixed a padding oracle in PKCS7_dataDecode and CMS_decrypt_set1_pkey.
+ An attack is simple, if the first CMS_recipientInfo is valid but the
+ second CMS_recipientInfo is chosen ciphertext. If the second
+ recipientInfo decodes to PKCS #1 v1.5 form plaintext, the correct
+ encryption key will be replaced by garbage, and the message cannot be
+ decoded, but if the RSA decryption fails, the correct encryption key is
+ used and the recipient will not notice the attack.
+ As a work around for this potential attack the length of the decrypted
+ key must be equal to the cipher default key length, in case the
+ certifiate is not given and all recipientInfo are tried out.
+ The old behaviour can be re-enabled in the CMS code by setting the
+ CMS_DEBUG_DECRYPT flag.
+ (CVE-2019-1563)
+ [Bernd Edlinger]
+
+ *) Early start up entropy quality from the DEVRANDOM seed source has been
+ improved for older Linux systems. The RAND subsystem will wait for
+ /dev/random to be producing output before seeding from /dev/urandom.
+ The seeded state is stored for future library initialisations using
+ a system global shared memory segment. The shared memory identifier
+ can be configured by defining OPENSSL_RAND_SEED_DEVRANDOM_SHM_ID to
+ the desired value. The default identifier is 114.
+ [Paul Dale]
+
+ *) Correct the extended master secret constant on EBCDIC systems. Without this
+ fix TLS connections between an EBCDIC system and a non-EBCDIC system that
+ negotiate EMS will fail. Unfortunately this also means that TLS connections
+ between EBCDIC systems with this fix, and EBCDIC systems without this
+ fix will fail if they negotiate EMS.
+ [Matt Caswell]
+
+ *) Use Windows installation paths in the mingw builds
+
+ Mingw isn't a POSIX environment per se, which means that Windows
+ paths should be used for installation.
+ (CVE-2019-1552)
+ [Richard Levitte]
+
+ *) Changed DH_check to accept parameters with order q and 2q subgroups.
+ With order 2q subgroups the bit 0 of the private key is not secret
+ but DH_generate_key works around that by clearing bit 0 of the
+ private key for those. This avoids leaking bit 0 of the private key.
+ [Bernd Edlinger]
+
+ *) Significantly reduce secure memory usage by the randomness pools.
+ [Paul Dale]
+
+ *) Revert the DEVRANDOM_WAIT feature for Linux systems
+
+ The DEVRANDOM_WAIT feature added a select() call to wait for the
+ /dev/random device to become readable before reading from the
+ /dev/urandom device.
+
+ It turned out that this change had negative side effects on
+ performance which were not acceptable. After some discussion it
+ was decided to revert this feature and leave it up to the OS
+ resp. the platform maintainer to ensure a proper initialization
+ during early boot time.
+ [Matthias St. Pierre]
+
+ Changes between 1.1.1b and 1.1.1c [28 May 2019]
+
+ *) Add build tests for C++. These are generated files that only do one
+ thing, to include one public OpenSSL head file each. This tests that
+ the public header files can be usefully included in a C++ application.
+
+ This test isn't enabled by default. It can be enabled with the option
+ 'enable-buildtest-c++'.
+ [Richard Levitte]
+
+ *) Enable SHA3 pre-hashing for ECDSA and DSA.
+ [Patrick Steuer]
+
+ *) Change the default RSA, DSA and DH size to 2048 bit instead of 1024.
+ This changes the size when using the genpkey app when no size is given. It
+ fixes an omission in earlier changes that changed all RSA, DSA and DH
+ generation apps to use 2048 bits by default.
+ [Kurt Roeckx]
+
+ *) Reorganize the manual pages to consistently have RETURN VALUES,
+ EXAMPLES, SEE ALSO and HISTORY come in that order, and adjust
+ util/fix-doc-nits accordingly.
+ [Paul Yang, Joshua Lock]
+
+ *) Add the missing accessor EVP_PKEY_get0_engine()
+ [Matt Caswell]
+
+ *) Have apps like 's_client' and 's_server' output the signature scheme
+ along with other cipher suite parameters when debugging.
+ [Lorinczy Zsigmond]
+
+ *) Make OPENSSL_config() error agnostic again.
+ [Richard Levitte]
+
+ *) Do the error handling in RSA decryption constant time.
+ [Bernd Edlinger]
+
+ *) Prevent over long nonces in ChaCha20-Poly1305.
+
+ ChaCha20-Poly1305 is an AEAD cipher, and requires a unique nonce input
+ for every encryption operation. RFC 7539 specifies that the nonce value
+ (IV) should be 96 bits (12 bytes). OpenSSL allows a variable nonce length
+ and front pads the nonce with 0 bytes if it is less than 12
+ bytes. However it also incorrectly allows a nonce to be set of up to 16
+ bytes. In this case only the last 12 bytes are significant and any
+ additional leading bytes are ignored.
+
+ It is a requirement of using this cipher that nonce values are
+ unique. Messages encrypted using a reused nonce value are susceptible to
+ serious confidentiality and integrity attacks. If an application changes
+ the default nonce length to be longer than 12 bytes and then makes a
+ change to the leading bytes of the nonce expecting the new value to be a
+ new unique nonce then such an application could inadvertently encrypt
+ messages with a reused nonce.
+
+ Additionally the ignored bytes in a long nonce are not covered by the
+ integrity guarantee of this cipher. Any application that relies on the
+ integrity of these ignored leading bytes of a long nonce may be further
+ affected. Any OpenSSL internal use of this cipher, including in SSL/TLS,
+ is safe because no such use sets such a long nonce value. However user
+ applications that use this cipher directly and set a non-default nonce
+ length to be longer than 12 bytes may be vulnerable.
+
+ This issue was reported to OpenSSL on 16th of March 2019 by Joran Dirk
+ Greef of Ronomon.
+ (CVE-2019-1543)
+ [Matt Caswell]
+
+ *) Add DEVRANDOM_WAIT feature for Linux systems
+
+ On older Linux systems where the getrandom() system call is not available,
+ OpenSSL normally uses the /dev/urandom device for seeding its CSPRNG.
+ Contrary to getrandom(), the /dev/urandom device will not block during
+ early boot when the kernel CSPRNG has not been seeded yet.
+
+ To mitigate this known weakness, use select() to wait for /dev/random to
+ become readable before reading from /dev/urandom.
+
+ *) Ensure that SM2 only uses SM3 as digest algorithm
+ [Paul Yang]
+
+ Changes between 1.1.1a and 1.1.1b [26 Feb 2019]
+
+ *) Added SCA hardening for modular field inversion in EC_GROUP through
+ a new dedicated field_inv() pointer in EC_METHOD.
+ This also addresses a leakage affecting conversions from projective
+ to affine coordinates.
+ [Billy Bob Brumley, Nicola Tuveri]
+
+ *) Change the info callback signals for the start and end of a post-handshake
+ message exchange in TLSv1.3. In 1.1.1/1.1.1a we used SSL_CB_HANDSHAKE_START
+ and SSL_CB_HANDSHAKE_DONE. Experience has shown that many applications get
+ confused by this and assume that a TLSv1.2 renegotiation has started. This
+ can break KeyUpdate handling. Instead we no longer signal the start and end
+ of a post handshake message exchange (although the messages themselves are
+ still signalled). This could break some applications that were expecting
+ the old signals. However without this KeyUpdate is not usable for many
+ applications.
+ [Matt Caswell]
+
+ *) Fix a bug in the computation of the endpoint-pair shared secret used
+ by DTLS over SCTP. This breaks interoperability with older versions
+ of OpenSSL like OpenSSL 1.1.0 and OpenSSL 1.0.2. There is a runtime
+ switch SSL_MODE_DTLS_SCTP_LABEL_LENGTH_BUG (off by default) enabling
+ interoperability with such broken implementations. However, enabling
+ this switch breaks interoperability with correct implementations.
+
+ *) Fix a use after free bug in d2i_X509_PUBKEY when overwriting a
+ re-used X509_PUBKEY object if the second PUBKEY is malformed.
+ [Bernd Edlinger]
+
+ *) Move strictness check from EVP_PKEY_asn1_new() to EVP_PKEY_asn1_add0().
+ [Richard Levitte]
+
+ *) Remove the 'dist' target and add a tarball building script. The
+ 'dist' target has fallen out of use, and it shouldn't be
+ necessary to configure just to create a source distribution.
+ [Richard Levitte]
+
+ Changes between 1.1.1 and 1.1.1a [20 Nov 2018]
+
+ *) Timing vulnerability in DSA signature generation
+
+ The OpenSSL DSA signature algorithm has been shown to be vulnerable to a
+ timing side channel attack. An attacker could use variations in the signing
+ algorithm to recover the private key.
+
+ This issue was reported to OpenSSL on 16th October 2018 by Samuel Weiser.
+ (CVE-2018-0734)
+ [Paul Dale]
+
+ *) Timing vulnerability in ECDSA signature generation
+
+ The OpenSSL ECDSA signature algorithm has been shown to be vulnerable to a
+ timing side channel attack. An attacker could use variations in the signing
+ algorithm to recover the private key.
+
+ This issue was reported to OpenSSL on 25th October 2018 by Samuel Weiser.
+ (CVE-2018-0735)
+ [Paul Dale]
+
+ *) Added EVP_PKEY_ECDH_KDF_X9_63 and ecdh_KDF_X9_63() as replacements for
+ the EVP_PKEY_ECDH_KDF_X9_62 KDF type and ECDH_KDF_X9_62(). The old names
+ are retained for backwards compatibility.
+ [Antoine Salon]
+
+ *) Fixed the issue that RAND_add()/RAND_seed() silently discards random input
+ if its length exceeds 4096 bytes. The limit has been raised to a buffer size
+ of two gigabytes and the error handling improved.
+
+ This issue was reported to OpenSSL by Dr. Falko Strenzke. It has been
+ categorized as a normal bug, not a security issue, because the DRBG reseeds
+ automatically and is fully functional even without additional randomness
+ provided by the application.
+
+ Changes between 1.1.0i and 1.1.1 [11 Sep 2018]
+
+ *) Add a new ClientHello callback. Provides a callback interface that gives
+ the application the ability to adjust the nascent SSL object at the
+ earliest stage of ClientHello processing, immediately after extensions have
+ been collected but before they have been processed. In particular, this
+ callback can adjust the supported TLS versions in response to the contents
+ of the ClientHello
+ [Benjamin Kaduk]
+
+ *) Add SM2 base algorithm support.
+ [Jack Lloyd]
+
+ *) s390x assembly pack: add (improved) hardware-support for the following
+ cryptographic primitives: sha3, shake, aes-gcm, aes-ccm, aes-ctr, aes-ofb,
+ aes-cfb/cfb8, aes-ecb.
+ [Patrick Steuer]
+
+ *) Make EVP_PKEY_asn1_new() a bit stricter about its input. A NULL pem_str
+ parameter is no longer accepted, as it leads to a corrupt table. NULL
+ pem_str is reserved for alias entries only.
+ [Richard Levitte]
+
+ *) Use the new ec_scalar_mul_ladder scaffold to implement a specialized ladder
+ step for prime curves. The new implementation is based on formulae from
+ differential addition-and-doubling in homogeneous projective coordinates
+ from Izu-Takagi "A fast parallel elliptic curve multiplication resistant
+ against side channel attacks" and Brier-Joye "Weierstrass Elliptic Curves
+ and Side-Channel Attacks" Eq. (8) for y-coordinate recovery, modified
+ to work in projective coordinates.
+ [Billy Bob Brumley, Nicola Tuveri]
+
+ *) Change generating and checking of primes so that the error rate of not
+ being prime depends on the intended use based on the size of the input.
+ For larger primes this will result in more rounds of Miller-Rabin.
+ The maximal error rate for primes with more than 1080 bits is lowered
+ to 2^-128.
+ [Kurt Roeckx, Annie Yousar]
+
+ *) Increase the number of Miller-Rabin rounds for DSA key generating to 64.
+ [Kurt Roeckx]
+
+ *) The 'tsget' script is renamed to 'tsget.pl', to avoid confusion when
+ moving between systems, and to avoid confusion when a Windows build is
+ done with mingw vs with MSVC. For POSIX installs, there's still a
+ symlink or copy named 'tsget' to avoid that confusion as well.
+ [Richard Levitte]
+
+ *) Revert blinding in ECDSA sign and instead make problematic addition
+ length-invariant. Switch even to fixed-length Montgomery multiplication.
+ [Andy Polyakov]
+
+ *) Use the new ec_scalar_mul_ladder scaffold to implement a specialized ladder
+ step for binary curves. The new implementation is based on formulae from
+ differential addition-and-doubling in mixed Lopez-Dahab projective
+ coordinates, modified to independently blind the operands.
+ [Billy Bob Brumley, Sohaib ul Hassan, Nicola Tuveri]
+
+ *) Add a scaffold to optionally enhance the Montgomery ladder implementation
+ for `ec_scalar_mul_ladder` (formerly `ec_mul_consttime`) allowing
+ EC_METHODs to implement their own specialized "ladder step", to take
+ advantage of more favorable coordinate systems or more efficient
+ differential addition-and-doubling algorithms.
+ [Billy Bob Brumley, Sohaib ul Hassan, Nicola Tuveri]
+
+ *) Modified the random device based seed sources to keep the relevant
+ file descriptors open rather than reopening them on each access.
+ This allows such sources to operate in a chroot() jail without
+ the associated device nodes being available. This behaviour can be
+ controlled using RAND_keep_random_devices_open().
+ [Paul Dale]
+
+ *) Numerous side-channel attack mitigations have been applied. This may have
+ performance impacts for some algorithms for the benefit of improved
+ security. Specific changes are noted in this change log by their respective
+ authors.
+ [Matt Caswell]
+
+ *) AIX shared library support overhaul. Switch to AIX "natural" way of
+ handling shared libraries, which means collecting shared objects of
+ different versions and bitnesses in one common archive. This allows to
+ mitigate conflict between 1.0 and 1.1 side-by-side installations. It
+ doesn't affect the way 3rd party applications are linked, only how
+ multi-version installation is managed.
+ [Andy Polyakov]
+
+ *) Make ec_group_do_inverse_ord() more robust and available to other
+ EC cryptosystems, so that irrespective of BN_FLG_CONSTTIME, SCA
+ mitigations are applied to the fallback BN_mod_inverse().
+ When using this function rather than BN_mod_inverse() directly, new
+ EC cryptosystem implementations are then safer-by-default.
+ [Billy Bob Brumley]
+
+ *) Add coordinate blinding for EC_POINT and implement projective
+ coordinate blinding for generic prime curves as a countermeasure to
+ chosen point SCA attacks.
+ [Sohaib ul Hassan, Nicola Tuveri, Billy Bob Brumley]
+
+ *) Add blinding to ECDSA and DSA signatures to protect against side channel
+ attacks discovered by Keegan Ryan (NCC Group).
+ [Matt Caswell]
+
+ *) Enforce checking in the pkeyutl command line app to ensure that the input
+ length does not exceed the maximum supported digest length when performing
+ a sign, verify or verifyrecover operation.
+ [Matt Caswell]
+
+ *) SSL_MODE_AUTO_RETRY is enabled by default. Applications that use blocking
+ I/O in combination with something like select() or poll() will hang. This
+ can be turned off again using SSL_CTX_clear_mode().
+ Many applications do not properly handle non-application data records, and
+ TLS 1.3 sends more of such records. Setting SSL_MODE_AUTO_RETRY works
+ around the problems in those applications, but can also break some.
+ It's recommended to read the manpages about SSL_read(), SSL_write(),
+ SSL_get_error(), SSL_shutdown(), SSL_CTX_set_mode() and
+ SSL_CTX_set_read_ahead() again.
+ [Kurt Roeckx]
+
+ *) When unlocking a pass phrase protected PEM file or PKCS#8 container, we
+ now allow empty (zero character) pass phrases.
+ [Richard Levitte]
+
+ *) Apply blinding to binary field modular inversion and remove patent
+ pending (OPENSSL_SUN_GF2M_DIV) BN_GF2m_mod_div implementation.
+ [Billy Bob Brumley]
+
+ *) Deprecate ec2_mult.c and unify scalar multiplication code paths for
+ binary and prime elliptic curves.
+ [Billy Bob Brumley]
+
+ *) Remove ECDSA nonce padding: EC_POINT_mul is now responsible for
+ constant time fixed point multiplication.
+ [Billy Bob Brumley]
+
+ *) Revise elliptic curve scalar multiplication with timing attack
+ defenses: ec_wNAF_mul redirects to a constant time implementation
+ when computing fixed point and variable point multiplication (which
+ in OpenSSL are mostly used with secret scalars in keygen, sign,
+ ECDH derive operations).
+ [Billy Bob Brumley, Nicola Tuveri, Cesar Pereida García,
+ Sohaib ul Hassan]
+
+ *) Updated CONTRIBUTING
+ [Rich Salz]
+
+ *) Updated DRBG / RAND to request nonce and additional low entropy
+ randomness from the system.
+ [Matthias St. Pierre]
+
+ *) Updated 'openssl rehash' to use OpenSSL consistent default.
+ [Richard Levitte]
+
+ *) Moved the load of the ssl_conf module to libcrypto, which helps
+ loading engines that libssl uses before libssl is initialised.
+ [Matt Caswell]
+
+ *) Added EVP_PKEY_sign() and EVP_PKEY_verify() for EdDSA
+ [Matt Caswell]
+
+ *) Fixed X509_NAME_ENTRY_set to get multi-valued RDNs right in all cases.
+ [Ingo Schwarze, Rich Salz]
+
+ *) Added output of accepting IP address and port for 'openssl s_server'
+ [Richard Levitte]
+
+ *) Added a new API for TLSv1.3 ciphersuites:
+ SSL_CTX_set_ciphersuites()
+ SSL_set_ciphersuites()
+ [Matt Caswell]
+
+ *) Memory allocation failures consistently add an error to the error
+ stack.
+ [Rich Salz]
+
+ *) Don't use OPENSSL_ENGINES and OPENSSL_CONF environment values
+ in libcrypto when run as setuid/setgid.
+ [Bernd Edlinger]
+
+ *) Load any config file by default when libssl is used.
+ [Matt Caswell]
+
+ *) Added new public header file <openssl/rand_drbg.h> and documentation
+ for the RAND_DRBG API. See manual page RAND_DRBG(7) for an overview.
+ [Matthias St. Pierre]
+
+ *) QNX support removed (cannot find contributors to get their approval
+ for the license change).
+ [Rich Salz]
+
+ *) TLSv1.3 replay protection for early data has been implemented. See the
+ SSL_read_early_data() man page for further details.
+ [Matt Caswell]