5 pkcs12 - PKCS#12 file utility
13 [B<-inkey file_or_id>]
14 [B<-certfile filename>]
26 [B<-des | -des3 | -idea | -aes128 | -aes192 | -aes256 | -aria128 | -aria192 | -aria256 | -camellia128 | -camellia192 | -camellia256 | -nodes>]
28 [B<-maciter | -nomaciter | -nomac>]
48 The B<pkcs12> command allows PKCS#12 files (sometimes referred to as
49 PFX files) to be created and parsed. PKCS#12 files are used by several
50 programs including Netscape, MSIE and MS Outlook.
54 There are a lot of options the meaning of some depends of whether a PKCS#12 file
55 is being created or parsed. By default a PKCS#12 file is parsed. A PKCS#12
56 file can be created by using the B<-export> option (see below).
58 =head1 PARSING OPTIONS
64 Print out a usage message.
68 This specifies filename of the PKCS#12 file to be parsed. Standard input is used
71 =item B<-out filename>
73 The filename to write certificates and private keys to, standard output by
74 default. They are all written in PEM format.
78 The PKCS#12 file (i.e. input file) password source. For more information about
79 the format of B<arg> see the B<PASS PHRASE ARGUMENTS> section in
84 Pass phrase source to encrypt any outputted private keys with. For more
85 information about the format of B<arg> see the B<PASS PHRASE ARGUMENTS> section
88 =item B<-password arg>
90 With -export, -password is equivalent to -passout.
91 Otherwise, -password is equivalent to -passin.
95 This option inhibits output of the keys and certificates to the output file
96 version of the PKCS#12 file.
100 Only output client certificates (not CA certificates).
104 Only output CA certificates (not client certificates).
108 No certificates at all will be output.
112 No private keys will be output.
116 Output additional information about the PKCS#12 file structure, algorithms
117 used and iteration counts.
121 Use DES to encrypt private keys before outputting.
125 Use triple DES to encrypt private keys before outputting, this is the default.
129 Use IDEA to encrypt private keys before outputting.
131 =item B<-aes128>, B<-aes192>, B<-aes256>
133 Use AES to encrypt private keys before outputting.
135 =item B<-aria128>, B<-aria192>, B<-aria256>
137 Use ARIA to encrypt private keys before outputting.
139 =item B<-camellia128>, B<-camellia192>, B<-camellia256>
141 Use Camellia to encrypt private keys before outputting.
145 Don't encrypt the private keys at all.
149 Don't attempt to verify the integrity MAC before reading the file.
153 Prompt for separate integrity and encryption passwords: most software
154 always assumes these are the same so this option will render such
155 PKCS#12 files unreadable.
159 =head1 FILE CREATION OPTIONS
165 This option specifies that a PKCS#12 file will be created rather than
168 =item B<-out filename>
170 This specifies filename to write the PKCS#12 file to. Standard output is used
173 =item B<-in filename>
175 The filename to read certificates and private keys from, standard input by
176 default. They must all be in PEM format. The order doesn't matter but one
177 private key and its corresponding certificate should be present. If additional
178 certificates are present they will also be included in the PKCS#12 file.
180 =item B<-inkey file_or_id>
182 File to read private key from. If not present then a private key must be present
184 If no engine is used, the argument is taken as a file; if an engine is
185 specified, the argument is given to the engine as a key identifier.
187 =item B<-name friendlyname>
189 This specifies the "friendly name" for the certificate and private key. This
190 name is typically displayed in list boxes by software importing the file.
192 =item B<-certfile filename>
194 A filename to read additional certificates from.
196 =item B<-caname friendlyname>
198 This specifies the "friendly name" for other certificates. This option may be
199 used multiple times to specify names for all certificates in the order they
200 appear. Netscape ignores friendly names on other certificates whereas MSIE
203 =item B<-pass arg>, B<-passout arg>
205 The PKCS#12 file (i.e. output file) password source. For more information about
206 the format of B<arg> see the B<PASS PHRASE ARGUMENTS> section in
209 =item B<-passin password>
211 Pass phrase source to decrypt any input private keys with. For more information
212 about the format of B<arg> see the B<PASS PHRASE ARGUMENTS> section in
217 If this option is present then an attempt is made to include the entire
218 certificate chain of the user certificate. The standard CA store is used
219 for this search. If the search fails it is considered a fatal error.
223 Encrypt the certificate using triple DES, this may render the PKCS#12
224 file unreadable by some "export grade" software. By default the private
225 key is encrypted using triple DES and the certificate using 40 bit RC2.
227 =item B<-keypbe alg>, B<-certpbe alg>
229 These options allow the algorithm used to encrypt the private key and
230 certificates to be selected. Any PKCS#5 v1.5 or PKCS#12 PBE algorithm name
231 can be used (see B<NOTES> section for more information). If a cipher name
232 (as output by the B<list-cipher-algorithms> command is specified then it
233 is used with PKCS#5 v2.0. For interoperability reasons it is advisable to only
234 use PKCS#12 algorithms.
236 =item B<-keyex|-keysig>
238 Specifies that the private key is to be used for key exchange or just signing.
239 This option is only interpreted by MSIE and similar MS software. Normally
240 "export grade" software will only allow 512 bit RSA keys to be used for
241 encryption purposes but arbitrary length keys for signing. The B<-keysig>
242 option marks the key for signing only. Signing only keys can be used for
243 S/MIME signing, authenticode (ActiveX control signing) and SSL client
244 authentication, however due to a bug only MSIE 5.0 and later support
245 the use of signing only keys for SSL client authentication.
247 =item B<-macalg digest>
249 Specify the MAC digest algorithm. If not included them SHA1 will be used.
251 =item B<-nomaciter>, B<-noiter>
253 These options affect the iteration counts on the MAC and key algorithms.
254 Unless you wish to produce files compatible with MSIE 4.0 you should leave
257 To discourage attacks by using large dictionaries of common passwords the
258 algorithm that derives keys from passwords can have an iteration count applied
259 to it: this causes a certain part of the algorithm to be repeated and slows it
260 down. The MAC is used to check the file integrity but since it will normally
261 have the same password as the keys and certificates it could also be attacked.
262 By default both MAC and encryption iteration counts are set to 2048, using
263 these options the MAC and encryption iteration counts can be set to 1, since
264 this reduces the file security you should not use these options unless you
265 really have to. Most software supports both MAC and key iteration counts.
266 MSIE 4.0 doesn't support MAC iteration counts so it needs the B<-nomaciter>
271 This option is included for compatibility with previous versions, it used
272 to be needed to use MAC iterations counts but they are now used by default.
276 Don't attempt to provide the MAC integrity.
278 =item B<-rand file(s)>
280 A file or files containing random data used to seed the random number
281 generator, or an EGD socket (see L<RAND_egd(3)>).
282 Multiple files can be specified separated by an OS-dependent character.
283 The separator is B<;> for MS-Windows, B<,> for OpenVMS, and B<:> for
286 =item B<-CAfile file>
288 CA storage as a file.
292 CA storage as a directory. This directory must be a standard certificate
293 directory: that is a hash of each subject name (using B<x509 -hash>) should be
294 linked to each certificate.
298 Do not load the trusted CA certificates from the default file location.
302 Do not load the trusted CA certificates from the default directory location.
306 Write B<name> as a Microsoft CSP name.
312 Although there are a large number of options most of them are very rarely
313 used. For PKCS#12 file parsing only B<-in> and B<-out> need to be used
314 for PKCS#12 file creation B<-export> and B<-name> are also used.
316 If none of the B<-clcerts>, B<-cacerts> or B<-nocerts> options are present
317 then all certificates will be output in the order they appear in the input
318 PKCS#12 files. There is no guarantee that the first certificate present is
319 the one corresponding to the private key. Certain software which requires
320 a private key and certificate and assumes the first certificate in the
321 file is the one corresponding to the private key: this may not always
322 be the case. Using the B<-clcerts> option will solve this problem by only
323 outputting the certificate corresponding to the private key. If the CA
324 certificates are required then they can be output to a separate file using
325 the B<-nokeys -cacerts> options to just output CA certificates.
327 The B<-keypbe> and B<-certpbe> algorithms allow the precise encryption
328 algorithms for private keys and certificates to be specified. Normally
329 the defaults are fine but occasionally software can't handle triple DES
330 encrypted private keys, then the option B<-keypbe PBE-SHA1-RC2-40> can
331 be used to reduce the private key encryption to 40 bit RC2. A complete
332 description of all algorithms is contained in the B<pkcs8> manual page.
334 Prior 1.1 release passwords containing non-ASCII characters were encoded
335 in non-compliant manner, which limited interoperability, in first hand
336 with Windows. But switching to standard-compliant password encoding
337 poses problem accessing old data protected with broken encoding. For
338 this reason even legacy encodings is attempted when reading the
339 data. If you use PKCS#12 files in production application you are advised
340 to convert the data, because implemented heuristic approach is not
341 MT-safe, its sole goal is to facilitate the data upgrade with this
346 Parse a PKCS#12 file and output it to a file:
348 openssl pkcs12 -in file.p12 -out file.pem
350 Output only client certificates to a file:
352 openssl pkcs12 -in file.p12 -clcerts -out file.pem
354 Don't encrypt the private key:
356 openssl pkcs12 -in file.p12 -out file.pem -nodes
358 Print some info about a PKCS#12 file:
360 openssl pkcs12 -in file.p12 -info -noout
362 Create a PKCS#12 file:
364 openssl pkcs12 -export -in file.pem -out file.p12 -name "My Certificate"
366 Include some extra certificates:
368 openssl pkcs12 -export -in file.pem -out file.p12 -name "My Certificate" \
369 -certfile othercerts.pem
377 Copyright 2000-2017 The OpenSSL Project Authors. All Rights Reserved.
379 Licensed under the OpenSSL license (the "License"). You may not use
380 this file except in compliance with the License. You can obtain a copy
381 in the file LICENSE in the source distribution or at
382 L<https://www.openssl.org/source/license.html>.