Check the return value from ASN1_INTEGER_set

Found by Coverity

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7169)

Validate the SM2 digest len before use

Fixes a Coverity complaint.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7170)

Don't cast an int * to a size_t *

If sizeof(int) != sizeof(size_t) this may not work correctly.

Fixes a Coverity issue.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7168)

More updates to CHANGES and NEWS for the 1.1.1 release

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7167)

Updates NEWS for the 1.1.1 release

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7164)

Update the pyca-cryptography submodule

Hopefully this will resolve spurious travis failures.

[extended tests]

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7163)

Add a sentence in CHANGES to note SM2 support

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7160)

test/evp_extra_test.c: fix null pointer dereference

It's actually not a real issue but caused by the absence of the default case
which does not occur in reality but which makes coverity see a code path where
pkey remains unassigned.

Reported by Coverity Scan (CID 1423323)
[extended tests]

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7158)

crypto/rsa/rsa_pss.c: silence coverity warning

Reported by Coverity Scan (CID 1439138)
[extended tests]

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7156)

test/dhtest.c: fix resource leak

Reported by Coverity Scan (CID 1439136)
[extended tests]

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7155)

ASN.1 DER: Make INT32 / INT64 types read badly encoded LONG zeroes

The deprecated ASN.1 type LONG / ZLONG (incorrectly) produced zero
length INTEGER encoding for zeroes.  For the sake of backward
compatibility, we allow those to be read without fault when using the
replacement types INT32 / UINT32 / INT64 / UINT64.

Fixes #7134

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7144)

TESTS: add test of decoding of invalid zero length ASN.1 INTEGER zero

Confirms #7134

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7153)

SipHash: add separate setter for the hash size

This was originally part of SipHash_Init.  However, there are cases
where there isn't any key material to initialize from when setting the
hash size, and we do allow doing so with a EVP_PKEY control.  The
solution is to provide a separate hash_size setter and to use it in
the corresponding EVP_PKEY_METHOD.

Fixes #7143

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7145)

TESTS: add SipHash tests with digestsize controls

Confirms #7143

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7154)

SipHash: make it possible to control the hash size through string controls

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7154)

test/evp_test.c: make it possible to use controls with MAC tests

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7154)

Do not reset SNI data in SSL_do_handshake()

PR #3783 introduce coded to reset the server side SNI state in
SSL_do_handshake() to ensure any erroneous config time SNI changes are
cleared. Unfortunately SSL_do_handshake() can be called mid-handshake
multiple times so this is the wrong place to do this and can mean that
any SNI data is cleared later on in the handshake too.

Therefore move the code to a more appropriate place.

Fixes #7014

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/7149)

Simplify SSL_get_servername() to avoid session references

Ideally, SSL_get_servername() would do exactly as it is documented
and return exactly what the client sent (i.e., what we currently
are stashing in the SSL's ext.hostname), without needing to refer
to an SSL_SESSION object.  For historical reasons, including the
parsed SNI value from the ClientHello originally being stored in the
SSL_SESSION's ext.hostname field, we have had references to the
SSL_SESSION in this function.  We cannot fully excise them due to
the interaction between user-supplied callbacks and TLS 1.2 resumption
flows, where we call all callbacks but the client did not supply an
SNI value.  Existing callbacks expect to receive a valid SNI value
in this case, so we must fake one up from the resumed session in
order to avoid breakage.

Otherwise, greatly simplify the implementation and just return the
value in the SSL, as sent by the client.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7115)

Restore historical SSL_get_servername() behavior

Commit 1c4aa31d79821dee9be98e915159d52cc30d8403 modified the state machine
to clean up stale ext.hostname values from SSL objects in the case when
SNI was not negotiated for the current handshake.  This is natural from
the TLS perspective, since this information is an extension that the client
offered but we ignored, and since we ignored it we do not need to keep it
around for anything else.

However, as documented in https://github.com/openssl/openssl/issues/7014 ,
there appear to be some deployed code that relies on retrieving such an
ignored SNI value from the client, after the handshake has completed.
Because the 1.1.1 release is on a stable branch and should preserve the
published ABI, restore the historical behavior by retaining the ext.hostname
value sent by the client, in the SSL structure, for subsequent retrieval.

[extended tests]

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7115)

Ensure certificate callbacks work correctly in TLSv1.3

The is_tls13_capable() function should not return 0 if no certificates
are configured directly because a certificate callback is present.

Fixes #7140

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7141)

Remove a reference to SSL_force_post_handshake_auth()

That function was removed in favour of SSL_set_post_handshake_auth().
Update the docs accordingly.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7139)

Test that we can handle a PHA CertificateRequest after we sent close_notify

Even though we already sent close_notify the server may not have recieved
it yet and could issue a CertificateRequest to us. Since we've already
sent close_notify we can't send any reasonable response so we just ignore
it.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7114)

Test that we can process a KeyUpdate received after we sent close_notify

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7114)

Process KeyUpdate and NewSessionTicket messages after a close_notify

If we've sent a close_notify then we are restricted about what we can do
in response to handshake messages that we receive. However we can sensibly
process NewSessionTicket messages. We can also process a KeyUpdate message
as long as we also ignore any request for us to update our sending keys.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7114)

Add missing SM2err and fix doc nits

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7113)

Allow EVP_MD_CTX_set_pkey_ctx to accept NULL pctx

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7113)

Add a SM2(7) man page

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7113)

Update document for SM2 stuffs

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7113)

Add test case for SM2 evp verification

This test case is originally submitted in #6757, by Jack Lloyd. The test
case has been modified to use the a different method to set the ID when
computing the Z hash of SM2 signature.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/7113)

Support setting SM2 ID

zero-length ID is allowed, but it's not allowed to skip the ID.

Fixes: #6534
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7113)

Make SM2 ID stick to specification

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7113)

Support pmeth->digest_custom

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7113)

Introduce EVP_MD_CTX_set_pkey_ctx

Thus users can use this function to set customized EVP_PKEY_CTX to
EVP_MD_CTX structure.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7113)

Remove unnecessary sm2_za.c

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7113)

fuzz/driver.c: appease -Wmissing-prototypes

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/7138)

Support EdDSA in apps/speed

This addresses issue #6922.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7073)

Avoid SEGV when giving X509_sign a NULL private key.

Put a NULL check back in to avoid dereferencing the NULL pointer.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7146)

RSA padding Zeroization fixes

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7090)

Key zeroization fix for EVP_SealInit + added simple test

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7105)

Harmonize the error handling codepath

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7121)

Fix segfault in RSA_free() (and DSA/DH/EC_KEY)

`RSA_free()` and friends are called in case of error from
`RSA_new_method(ENGINE *e)` (or the respective equivalent functions).

For the rest of the description I'll talk about `RSA_*`, but the same
applies for the equivalent `DSA_free()`, `DH_free()`, `EC_KEY_free()`.

If `RSA_new_method()` fails because the engine does not implement the
required method, when `RSA_free(RSA *r)` is called,
`r->meth == NULL` and a segfault happens while checking if
`r->meth->finish` is defined.

This commit fixes this issue by ensuring that `r->meth` is not NULL
before dereferencing it to check for `r->meth->finish`.

Fixes #7102 .

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7121)

New openssl subject parser hard to debug

-subj 'subject=C = US, ST = A, L = root, O = Hewlett Packard Enterprise Company, OU = Remote Device Access, CN = Hewlett Packard Enterprise Remote Device Access Test Local CA, emailAddress = rda@hpe.com'
was a valid subject in openssl 1.0. Error received in 1.1 is:

problems making Certificate Request

Not very informative, I only figured this out because I compiled the
code and added logging.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7098)

hkdf zeroization fix

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7106)

key zeroisation fix for p12

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7109)

key zeroisation for pvkfmt now done on all branch paths

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7107)

key zeroization fix for a branch path of tls13_final_finish_mac

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7110)

openssl req: don't try to report bits

With the introduction of -pkeyopt, the number of bits may change
without |newkey| being updated.  Unfortunately, there is no API to
retrieve the information from a EVP_PKEY_CTX either, so chances are
that we report incorrect information.  For the moment, it's better not
to try to report the number of bits at all.

Fixes #7086

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7096)

Clarify the return value of SSL_client_version()

The SSL_client_version() function returns the value held in the
legacy_version field of the ClientHello. This is never greater than
TLSv1.2, even if TLSv1.3 later gets negotiated.

Fixes #7079

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7095)

Add a test for RSA key exchange with both RSA and RSA-PSS certs

Check that we use an RSA certificate if an RSA key exchange ciphersuite
is being used and we have both RSA and RSA-PSS certificates configured.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7099)

Don't use an RSA-PSS cert for RSA key exchange

If we have selected a ciphersuite using RSA key exchange then we must
not attempt to use an RSA-PSS cert for that.

Fixes #7059

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7099)

Test creation of tickets when using a TLSv1.3 PSK

Add a test to check that we create the correct number of tickets after a
TLSv1.3 PSK.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7097)

Send a NewSessionTicket after using an external PSK

Treat a connection using an external PSK like we would a resumption and
send a single NewSessionTicket afterwards.

Fixes #6941

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7097)

Clarify the EVP_DigestSignInit docs

They did not make it clear how the memory management works for the |pctx|
parameter.

Fixes #7037

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7042)

Ignore EPIPE when sending NewSessionTickets in TLSv1.3

If a client sends data to a server and then immediately closes without
waiting to read the NewSessionTickets then the server can receive EPIPE
when trying to write the tickets and never gets the opportunity to read
the data that was sent. Therefore we ignore EPIPE when writing out the
tickets in TLSv1.3

Fixes #6904

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6944)

Fix example in crl(1) man page

The default input format is PEM, so explicit "-inform DER" is needed to
read DER-encoded CRL.

CLA: trivial

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7094)

Fixed a comment that referenced the wrong method

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7100)

Fix HMAC SHA3-224 and HMAC SHA3-256.

Added NIST test cases for these two as well.

Additionally deprecate the public definiton of HMAC_MAX_MD_CBLOCK in 1.2.0.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6972)

demos/evp: add make clean

Add make clean for evp demos and remove whitespace from a line.

CLA: trivial

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7072)

Make OBJ_NAME case insensitive.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7089)

hmac_init cleanup and fix key zeroization issue

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7092)

[test] throw error from wrapper function instead of an EC_METHOD specific one

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7028)

[test] ECC: make sure negative tests pass for the right reasons

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7028)

Fix the comment of PEM_read_bio_ex

Add one more unit test case

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/6892)

Rename SSL[_CTX]_add1_CA_list -> SSL[_CTX]_add1_to_CA_list

They add a single item, so the names give a false impression of what
they do, making them hard to remember.  Better to give them a somewhat
better name.

Fixes #6930

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6931)

add docs for OCSP_resp_get0_signature

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7082)

add getter for tbsResponseData and signatureAlgorithm on OCSP_BASICRESP

fixes #7081

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7082)

Check the return from BN_sub() in BN_X931_generate_Xpq().

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7088)

Check for a failure return from EVP_MD_CTX_new() in OCSP_basic_sign().

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7087)

Remove redundant ASN1_INTEGER_set call

This trivial patch removes a duplicated call to ASN1_INTEGER_set.

Fixes Issue #6977

Signed-off-by: Eric Brown <browne@vmware.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6984)

Add a note in the docs about sharing PSKs between TLSv1.2 and TLSv1.3

Fixes #6490

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/7044)

Fix ssl/t1_trce.c to parse certificate chains

Fixes #6994

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/7009)

TLSv1.3 related changes to man pages

Add or update the documentation of the different man pages in relation to TLSv1.3 behaviour.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/6939)

Revert ".travis.yml: omit linux-ppc64le target."

IBM POWER Open Source Ecosystem division asserts commitment to providing
more reliable service. GH#7016.

This reverts commit 275bfc56a6c4efa7e80c8cbb11fda0c3f9be818d.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Free SSL object on an error path

Thanks to @fangang190 for reporting this

Fixes #7061

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/7065)

Fix a mem leak on error in the PSK code

Thanks to @fangang190 for reporting this issue.

Fixes #7060

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/7065)

fix out-of-bounds write in sm2_crypt.c

asn1_encode has two form length octets: short form(1 byte), long form(1+n byte).

CLA: Trivial

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7027)

x509v3/v3_purp.c: refine lock-free check in x509v3_cache_extensions.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6996)

internal/tsan_assist.h: add tsan_ld_acq and tsan_st_rel.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6996)

Configurations/unix-Makefile.tmpl: address find portability issue.

-path is non-portable extension, fortunately it's possible to express
.git subdirectory exclusion with -prune.

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7004)

Add semicolon at the end of the function prototypes

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7041)

Do not ignore EVP_PKEY_print_public/EVP_PKEY_print_private return values

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/7007)

bn/bn_lib.c: conceal even memmory access pattern in bn2binpad.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6915)

bn/bn_blind.c: use Montgomery multiplication when possible.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6915)

rsa/rsa_ossl.c: implement variant of "Smooth CRT-RSA."

In [most common] case of p and q being of same width, it's possible to
replace CRT modulo operations with Montgomery reductions. And those are
even fixed-length Montgomery reductions...

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6915)

crypto/bn: add more fixed-top routines.

Add bn_{mul|sqr}_fixed_top, bn_from_mont_fixed_top, bn_mod_sub_fixed_top.
Switch to bn_{mul|sqr}_fixed_top in bn_mul_mont_fixed_top and remove
memset in bn_from_montgomery_word.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6915)

Update fuzz corpora

Reviewed-by: Tim Hudson <tjh@openssl.org>
GH: #7033

Fix typos in documentation.

CLA: trivial

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7038)

Extend dladdr() for AIX, consequence from changes for openssl#6368.

The shared libraries are now stored as members of archives, as it is usual
on AIX. To correctly address this the custom dladdr()-implementation as
well as the dlfcn_load() routine need to be able to cope with such a
construct: libname.a(libname.so).

Signed-off-by: Matthias Kraft <Matthias.Kraft@softwareag.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6872)

crypto/init.c: improve destructor_key's portability.

It was assumed that CRYPTO_THREAD_LOCAL is universally scalar type,
which doesn't appear to hold true.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6976)

man3/OBJ_nid2obj.pod: mention failure code for OBJ_create.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6998)

asn1/asn_moid.c: overhaul do_create.

Original could allocate nid and then bail out on malloc failure. Instead
allocate first *then* attempt to create object.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6998)

Ignore the digest in req app if using EdDSA

This follows on from the previous commit, and makes the same change to
ignore the digest if we are using EdDSA.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6901)

Improve the usability of the ca app using EdDSA

Previously you had to supply "null" as the digest to use EdDSA. This changes
things so that any digest is ignored.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6901)

Fix BoringSSL external test failures

We recently turned on the TLSv1.3 downgrade sentinels by default.
Unfortunately we are using a very old version of the BoringSSL test
runner which uses an old draft implementation of TLSv1.3 that also
uses the downgrade sentinels by default. The two implementations do
not play well together and were causing spurious test failures. Until
such time as we update the BoringSSL test runner we disable the failing
tests:

SendFallbackSCSV

In this test the client is OpenSSL and the server is the boring test runner.
The client and server fail to negotiate TLSv1.3 because the test runner is
using an old draft TLSv1.3 version. The server does however add the
TLSv1.3->TLSv1.2 downgrade sentinel in the ServerHello random. Since we
recently turned on checking of the downgrade sentinels on the client side
this causes the connection to fail.

VersionNegotiationExtension-TLS11

In this test the test runner is the client and OpenSSL is the server. The
test modifies the supported_versions extension sent by the client to only
include TLSv1.1 (and some other spurious versions), even though the client
does actually support TLSv1.2. The server successfully selects TLSv1.1, but
adds the TLSv1.3->TLSv1.1 downgrade sentinel. This behaviour was recently
switched on by default. The test runner then checks the downgrade sentinel
and aborts the connection because it knows that it really supports TLSv1.2.

VersionNegotiationExtension-TLS1
VersionNegotiationExtension-SSL3

The same as VersionNegotiationExtension-TLS11 but for TLSv1 and SSLv3.

ConflictingVersionNegotiation

In this test the client is the test runner, and OpenSSL is the server. The
client offers TLSv1.2 in ClientHello.version, but also adds a
supported_versions extension that only offers TLSv1.1. The
supported_versions extension takes precedence and the server (correctly)
selects TLSv1.1. However it also adds the TLSv1.3->TLSv1.1 downgrade
sentinel. On the client side it knows it actually offered TLSv1.2 and so the
downgrade sentinel check fails.

[extended tests]

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7013)

Don't detect a downgrade where the server has a protocol version hole

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7013)

Test that a client protocol "hole" doesn't get detected as a downgrade

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7013)

Use the same min-max version range on the client consistently

We need to ensure that the min-max version range we use when constructing
the ClientHello is the same range we use when we validate the version
selected by the ServerHello. Otherwise this may appear as a fallback or
downgrade.

Fixes #6964

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7013)

rand_lib.c: Don't open random devices while cleaning up.

Fixes #7022

In pull request #6432 a change was made to keep the handles to the
random devices opened in order to avoid reseeding problems for
applications in chroot environments.

As a consequence, the handles of the random devices were leaked at exit
if the random generator was not used by the application. This happened,
because the call to RAND_set_rand_method(NULL) in rand_cleanup_int()
triggered a call to the call_once function do_rand_init, which opened
the random devices via rand_pool_init().

Thanks to GitHub user @bwelling for reporting this issue.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7023)

Fix typos in documentation

CLA: trivial

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7021)

Allow TLS-1.3 ciphersuites in @SECLEVEL=3 and above

The TLS-1.3 ciphersuites must not be blocked by @SECLEVEL=3 even
though they are not explicitly marked as using DH/ECDH.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6959)