From: Richard Levitte Date: Wed, 20 May 2015 18:03:20 +0000 (+0200) Subject: Refactor file writing - Remake Makefile.org into a template X-Git-Tag: OpenSSL_1_1_0-pre3~427 X-Git-Url: https://git.openssl.org/?p=openssl.git;a=commitdiff_plain;h=107b5792b24ae701df442cd36bda785cbaf1bfdc Refactor file writing - Remake Makefile.org into a template It is time for Makefile.org to fold into the new regime and have a run through util/dofile.pl. This forces some information out of there and into Configure, which isn't a bad thing, it makes Configure increasingly the center of build information, which is as it should be. A few extra defaults were needed in the BASE template to get rid of warnings about missing values. Reviewed-by: Viktor Dukhovni --- diff --git a/Configurations/00-base-templates.conf b/Configurations/00-base-templates.conf index 90633c4abf..c5ff592e33 100644 --- a/Configurations/00-base-templates.conf +++ b/Configurations/00-base-templates.conf @@ -20,6 +20,10 @@ poly1305_obj => "", unistd => "", + shared_target => "", + shared_cflag => "", + shared_ldflag => "", + shared_extension => "", build_scheme => "unixmake", }, diff --git a/Configure b/Configure index e717eb3973..b1d6259e89 100755 --- a/Configure +++ b/Configure @@ -167,6 +167,35 @@ sub read_config; sub resolve_config; +# Information collection ############################################# + +# Collect version numbers +$config{version} = "unknown"; +$config{version_num} = "unknown"; +$config{shlib_version_number} = "unknown"; +$config{shlib_version_history} = "unknown"; + +collect_information( + ' sub { $config{version} = $1; }, + qr/OPENSSL.VERSION.NUMBER.*(0x\S+)/ => sub { $config{version_num}=$1 }, + qr/SHLIB_VERSION_NUMBER *"([^"]+)"/ => sub { $config{shlib_version_number}=$1 }, + qr/SHLIB_VERSION_HISTORY *"([^"]*)"/ => sub { $config{shlib_version_history}=$1 } + ); +if ($config{shlib_version_history} ne "") { $config{shlib_version_history} .= ":"; } + +($config{major}, $config{minor}) + = ($config{version} =~ /^([0-9]+)\.([0-9\.]+)/); +($config{shlib_major}, $config{shlib_minor}) + = ($config{shlib_version_number} =~ /^([0-9]+)\.([0-9\.]+)/); +die "erroneous version information in opensslv.h: ", + "$config{major}, $config{minor}, $config{shlib_major}, $config{shlib_minor}\n" + if ($config{major} eq "" || $config{minor} eq "" + || $config{shlib_major} eq "" || $config{shlib_minor} eq ""); + +# Collect target configurations + my ($vol, $dir, $dummy) = File::Spec->splitpath($0); my $pattern = File::Spec->catpath($vol, $dir, "Configurations/*.conf"); foreach (sort glob($pattern) ) { @@ -174,17 +203,18 @@ foreach (sort glob($pattern) ) { } +print "Configuring OpenSSL version $config{version} (0x$config{version_num})\n"; + $config{perl}; $config{prefix}=""; $config{openssldir}=""; $config{processor}=""; -my $libdir=""; -my $exe_ext=""; -my $install_prefix= "$ENV{'INSTALL_PREFIX'}"; +$config{libdir}=""; +$config{install_prefix}= "$ENV{'INSTALL_PREFIX'}"; $config{cross_compile_prefix}=""; -my $fipslibdir="/usr/local/ssl/fips-2.0/lib/"; +$config{fipslibdir}="/usr/local/ssl/fips-2.0/lib/"; my $nofipscanistercheck=0; -my $baseaddr="0xFB00000"; +$config{baseaddr}="0xFB00000"; my $no_threads=0; my $threads=0; $config{no_shared}=0; # but "no-shared" is default @@ -192,10 +222,22 @@ my $zlib=1; # but "no-zlib" is default my $no_rfc3779=0; my $no_asm=0; my $no_dso=0; -my @skip=(); my $Makefile="Makefile"; my $default_ranlib; -my $fips=0; +$config{fips}=0; + +# Top level directories to build +$config{dirs} = [ "crypto", "ssl", "engines", "apps", "test", "tools" ]; +# crypto/ subdirectories to build +$config{sdirs} = [ + "objects", + "md2", "md4", "md5", "sha", "mdc2", "hmac", "ripemd", "whrlpool", "poly1305", + "des", "aes", "rc2", "rc4", "rc5", "idea", "bf", "cast", "camellia", "seed", "chacha", "modes", + "bn", "ec", "rsa", "dsa", "dh", "dso", "engine", + "buffer", "bio", "stack", "lhash", "rand", "err", + "evp", "asn1", "pem", "x509", "x509v3", "conf", "txt_db", "pkcs7", "pkcs12", "comp", "ocsp", "ui", + "cms", "ts", "jpake", "srp", "store", "cmac", "ct", "async", "kdf" + ]; # Known TLS and DTLS protocols my @tls = qw(ssl3 tls1 tls1_1 tls1_2); @@ -366,10 +408,10 @@ while ((my $first, my $second) = (shift @list, shift @list)) { unshift @list, $second; } -# Construct the string of what $depflags should look like with the defaults +# Construct the string of what $config{depflags} should look like with the defaults # from %disabled above. (we need this to see if we should advise the user # to run "make depend"): -my $default_depflags = " ".join(" ", +my $default_depflags = join(" ", map { my $x = $_; $x =~ tr{[a-z]-}{[A-Z]_}; "-DOPENSSL_NO_$x"; } grep { $disabled{$_} !~ /\(no-depflags\)$/ } sort keys %disabled); @@ -388,7 +430,7 @@ my $no_sse2=0; &usage if ($#ARGV < 0); my $flags=""; -my $depflags=""; +$config{depflags}=""; $config{openssl_experimental_defines}=[]; $config{openssl_api_defines}=[]; $config{openssl_algorithm_defines}=[]; @@ -398,7 +440,6 @@ $config{openssl_other_defines}=[]; my $libs=""; my $target=""; $config{options}=""; -my $api; my $make_depend=0; my %withargs=(); my $build_prefix = "release_"; @@ -544,7 +585,7 @@ foreach (@argvcopy) { $config{processor}=386; } elsif (/^fips$/) { - $fips=1; + $config{fips}=1; } elsif (/^rsaref$/) { @@ -554,7 +595,7 @@ foreach (@argvcopy) } elsif (/^nofipscanistercheck$/) { - $fips = 1; + $config{fips} = 1; $nofipscanistercheck = 1; } elsif (/^[-+]/) @@ -565,11 +606,11 @@ foreach (@argvcopy) } elsif (/^--api=(.*)$/) { - $api=$1; + $config{api}=$1; } elsif (/^--libdir=(.*)$/) { - $libdir=$1; + $config{libdir}=$1; } elsif (/^--openssldir=(.*)$/) { @@ -577,7 +618,7 @@ foreach (@argvcopy) } elsif (/^--install.prefix=(.*)$/) { - $install_prefix=$1; + $config{install_prefix}=$1; } elsif (/^--with-zlib-lib=(.*)$/) { @@ -589,11 +630,11 @@ foreach (@argvcopy) } elsif (/^--with-fipslibdir=(.*)$/) { - $fipslibdir="$1/"; + $config{fipslibdir}="$1/"; } elsif (/^--with-baseaddr=(.*)$/) { - $baseaddr="$1"; + $config{baseaddr}="$1"; } elsif (/^--cross-compile-prefix=(.*)$/) { @@ -636,8 +677,8 @@ foreach (@argvcopy) { $config{options} .= " ".$_; } } - if (defined($api) && !exists $apitable->{$api}) { - die "***** Unsupported api compatibility level: $api\n", + if (defined($config{api}) && !exists $apitable->{$config{api}}) { + die "***** Unsupported api compatibility level: $config{api}\n", } if (keys %unsupported_options) @@ -647,10 +688,14 @@ foreach (@argvcopy) } } -if ($fips) +if ($config{fips}) { delete $disabled{"shared"} if ($disabled{"shared"} =~ /^default/); } +else + { + @{$config{dirs}} = grep !/^fips$/, @{$config{dirs}}; + } my @tocheckfor = (keys %disabled); while (@tocheckfor) { @@ -714,6 +759,10 @@ foreach (sort (keys %disabled)) { } elsif (/^sse2$/) { $no_sse2 = 1; } + elsif (/^engine$/) + { @{$config{dirs}} = grep !/^engine$/, @{$config{dirs}}; } + elsif (/^gost$/) + { @{$config{engdirs}} = grep !/^ccgost$/, @{$config{engdirs}}; } else { my ($ALGO, $algo); @@ -732,16 +781,15 @@ foreach (sort (keys %disabled)) ($ALGO,$algo) = ("RMD160","rmd160") if ($algo eq "ripemd"); push @{$config{openssl_algorithm_defines}}, "OPENSSL_NO_$ALGO"; + $config{depflags} .= " -DOPENSSL_NO_$ALGO"; print " OPENSSL_NO_$ALGO"; - push @skip, $algo; # fix-up crypto/directory name(s) - $skip[$#skip]="whrlpool" if $algo eq "whirlpool"; - $skip[$#skip]="ripemd" if $algo eq "rmd160"; + $algo="whrlpool" if $algo eq "whirlpool"; + $algo="ripemd" if $algo eq "rmd160"; + @{$config{sdirs}} = grep { $_ ne $algo} @{$config{sdirs}}; print " (skip dir)"; - - $depflags .= " -DOPENSSL_NO_$ALGO"; } } @@ -778,9 +826,10 @@ my %target = ( %{$table{$base_target}}, resolve_config($target) ); &usage if (!%target || $target{template}); -$exe_ext=".exe" if ($target eq "Cygwin" || $target eq "DJGPP" || $target =~ /^mingw/); -$exe_ext=".nlm" if ($target =~ /netware/); -$exe_ext=".pm" if ($target =~ /vos/); +$target{exe_extension}=""; +$target{exe_extension}=".exe" if ($config{target} eq "Cygwin" || $config{target} eq "DJGPP" || $config{target} =~ /^mingw/); +$target{exe_extension}=".nlm" if ($config{target} =~ /netware/); +$target{exe_extension}=".pm" if ($config{target} =~ /vos/); $default_ranlib = which("ranlib") || "true"; $config{perl} = $ENV{'PERL'} || which("perl5") || which("perl") || "perl"; @@ -799,15 +848,17 @@ $target{cc} = $ENV{CC} || $target{cc}; # For cflags and lflags, add the debug_ or release_ attributes # Do it in such a way that no spurious space is appended (hence the grep). -my $cflags = join(" ", - grep { $_ } ($target{cflags}, - $target{$build_prefix."cflags"})); -my $lflags = join(" ", - grep { $_ } ($target{lflags}, - $target{$build_prefix."lflags"})); +$config{cflags} = join(" ", + grep { $_ ne "" } ($target{cflags}, + $target{$build_prefix."cflags"})); +$config{lflags} = join(" ", + grep { $_ ne "" } ($target{lflags}, + $target{$build_prefix."lflags"})); $target{ranlib} = $ENV{'RANLIB'} || $target{ranlib} || $default_ranlib; $target{ar} = $ENV{'AR'} || "ar"; +$target{arflags} = "" if !defined($target{arflags}); +$target{nm} = "nm"; # Make sure build_scheme is consistent. $target{build_scheme} = [ $target{build_scheme} ] if ref($target{build_scheme}) ne "ARRAY"; @@ -818,32 +869,32 @@ $target{build_scheme} = [ $target{build_scheme} ] # we're ready to tolerate, so don't... $target{multilib}="" if !-d "$config{prefix}/lib$target{multilib}"; -$libdir="lib$target{multilib}" if $libdir eq ""; -$config{enginesdir}=$config{prefix} . "/" . $libdir . "/engines"; +$config{libdir}="lib$target{multilib}" if $config{libdir} eq ""; +$config{enginesdir}=$config{prefix} . "/" . $config{libdir} . "/engines"; -$cflags = "$cflags$exp_cflags"; +$config{cflags} .= "$exp_cflags"; -# '%' in $lflags is used to split flags to "pre-" and post-flags -my ($prelflags,$postlflags)=split('%',$lflags); -if (defined($postlflags)) { $lflags=$postlflags; } -else { $lflags=$prelflags; undef $prelflags; } +# '%' in $config{lflags} is used to split flags to "pre-" and post-flags +my ($pre,$post)=split('%',$config{lflags}); +if (defined($post)) { $config{prelflags}=$pre; $config{lflags}=$post; } +else { $config{prelflags}=""; $config{lflags}=$pre; } -if ($target =~ /^mingw/ && `$target{cc} --target-help 2>&1` !~ m/\-mno\-cygwin/m) +if ($target =~ /^mingw/ && `$target{cc} --target-help 2>&1` !~ m/-mno-cygwin/m) { - $cflags =~ s/\-mno\-cygwin\s*//; - $target{shared_ldflag} =~ s/\-mno\-cygwin\s*//; + $config{cflags} =~ s/-mno-cygwin\s*//; + $target{shared_ldflag} =~ s/-mno-cygwin\s*//; } -if ($target =~ /linux.*\-mips/ && !$no_asm && $flags !~ /\-m(ips|arch=)/) { +if ($target =~ /linux.*-mips/ && !$no_asm && $flags !~ /-m(ips|arch=)/) { # minimally required architecture flags for assembly modules - $cflags="-mips2 $cflags" if ($target =~ /mips32/); - $cflags="-mips3 $cflags" if ($target =~ /mips64/); + $config{cflags}="-mips2 $config{cflags}" if ($target =~ /mips32/); + $config{cflags}="-mips3 $config{cflags}" if ($target =~ /mips64/); } my $no_shared_warn=0; my $no_user_cflags=0; -if ($flags ne "") { $cflags="$flags$cflags"; } +if ($flags ne "") { $config{cflags}="$flags$config{cflags}"; } else { $no_user_cflags=1; } # The DSO code currently always implements all functions so that no @@ -868,7 +919,7 @@ if (!$no_dso && $target{dso_scheme} ne "") { $dso_cflags = "-DDSO_$target{dso_scheme}"; } - $cflags = "$dso_cflags $cflags"; + $config{cflags} = "$dso_cflags $config{cflags}"; } my $thread_cflags; @@ -889,12 +940,12 @@ if ($target{thread_cflag} eq "(unknown)" && $threads) print "provide any system-specific compiler options\n"; exit(1); } - $thread_cflags="-DOPENSSL_THREADS $cflags" ; + $thread_cflags="-DOPENSSL_THREADS $config{cflags}" ; push @thread_defines, "OPENSSL_THREADS"; } else { - $thread_cflags="-DOPENSSL_THREADS $target{thread_cflag} $cflags"; + $thread_cflags="-DOPENSSL_THREADS $target{thread_cflag} $config{cflags}"; push @thread_defines, "OPENSSL_THREADS"; # my $def; # foreach $def (split ' ',$target{thread_cflag}) @@ -906,57 +957,55 @@ else # } } -$lflags="$libs$lflags" if ($libs ne ""); +$config{lflags}="$libs$config{lflags}" if ($libs ne ""); if ($no_asm) { - $cflags=~s/\-D[BL]_ENDIAN// if ($fips); - $thread_cflags=~s/\-D[BL]_ENDIAN// if ($fips); + $config{cflags}=~s/-D[BL]_ENDIAN// if ($config{fips}); + $thread_cflags=~s/-D[BL]_ENDIAN// if ($config{fips}); } if ($threads) { - $cflags=$thread_cflags; + $config{cflags}=$thread_cflags; push @{$config{openssl_thread_defines}}, @thread_defines; } if ($zlib) { - $cflags = "-DZLIB $cflags"; + $config{cflags} = "-DZLIB $config{cflags}"; if (defined($disabled{"zlib-dynamic"})) { if (defined($withargs{"zlib-lib"})) { - $lflags = "$lflags -L" . $withargs{"zlib-lib"} . " -lz"; + $config{lflags} .= " -L" . $withargs{"zlib-lib"} . " -lz"; } else { - $lflags = "$lflags -lz"; + $config{lflags} .= " -lz"; } } else { - $cflags = "-DZLIB_SHARED $cflags"; + $config{cflags} = "-DZLIB_SHARED $config{cflags}"; } } # With "deprecated" disable all deprecated features. if (defined($disabled{"deprecated"})) { - $api = $maxapi; + $config{api} = $maxapi; } -# You will find shlib_mark1 and shlib_mark2 explained in Makefile.in -my $shared_mark = ""; if ($target{shared_target} eq "") { - $no_shared_warn = 1 if !$config{no_shared} && !$fips; + $no_shared_warn = 1 if !$config{no_shared} && !$config{fips}; $config{no_shared} = 1; } if (!$config{no_shared}) { if ($target{shared_cflag} ne "") { - $cflags = "$target{shared_cflag} -DOPENSSL_PIC $cflags"; + $config{cflags} = "$target{shared_cflag} -DOPENSSL_PIC $config{cflags}"; } } @@ -978,7 +1027,7 @@ if ($target{build_scheme}->[0] ne "mk1mf") # # Platform fix-ups # -if ($target =~ /\-icc$/) # Intel C compiler +if ($target =~ /-icc$/) # Intel C compiler { my $iccver=0; if (open(FD,"$target{cc} -V 2>&1 |")) @@ -988,25 +1037,25 @@ if ($target =~ /\-icc$/) # Intel C compiler } if ($iccver>=8) { - $cflags=~s/\-KPIC/-fPIC/; + $config{cflags}=~s/-KPIC/-fPIC/; # Eliminate unnecessary dependency from libirc.a. This is # essential for shared library support, as otherwise # apps/openssl can end up in endless loop upon startup... - $cflags.=" -Dmemcpy=__builtin_memcpy -Dmemset=__builtin_memset"; + $config{cflags}.=" -Dmemcpy=__builtin_memcpy -Dmemset=__builtin_memset"; } if ($iccver>=9) { - $lflags.=" -i-static"; - $lflags=~s/\-no_cpprt/-no-cpprt/; + $config{lflags}.=" -i-static"; + $config{lflags}=~s/-no_cpprt/-no-cpprt/; } if ($iccver>=10) { - $lflags=~s/\-i\-static/-static-intel/; + $config{lflags}=~s/-i-static/-static-intel/; } if ($iccver>=11) { - $cflags.=" -no-intel-extensions"; # disable Cilk - $lflags=~s/\-no\-cpprt/-no-cxxlib/; + $config{cflags}.=" -no-intel-extensions"; # disable Cilk + $config{lflags}=~s/-no-cpprt/-no-cxxlib/; } } @@ -1018,14 +1067,14 @@ if ($target =~ /\-icc$/) # Intel C compiler # should engrave this into Makefile.shared rules or into BSD-* config # lines above. Meanwhile let's try to be cautious and pass -rpath to # linker only when --prefix is not /usr. -if ($target =~ /^BSD\-/) +if ($target =~ /^BSD-/) { $target{shared_ldflag}.=" -Wl,-rpath,\$\$(LIBRPATH)" if ($config{prefix} !~ m|^/usr[/]*$|); } if ($target{sys_id} ne "") { - #$cflags="-DOPENSSL_SYS_$target{sys_id} $cflags"; + #$config{cflags}="-DOPENSSL_SYS_$target{sys_id} $config{cflags}"; push @{$config{openssl_sys_defines}}, "OPENSSL_SYS_$target{sys_id}"; } @@ -1036,68 +1085,95 @@ if ($target{ranlib} eq "") if (!$no_asm) { $target{cpuid_obj}=$table{BASE}->{cpuid_obj} if ($config{processor} eq "386"); - $target{cpuid_obj}.=" uplink.o uplink-x86.o" if ($cflags =~ /\-DOPENSSL_USE_APPLINK/); + $target{cpuid_obj}.=" uplink.o uplink-x86.o" if ($config{cflags} =~ /-DOPENSSL_USE_APPLINK/); $target{bn_obj} =~ s/\w+-gf2m.o// if (defined($disabled{ec2m})); # bn-586 is the only one implementing bn_*_part_words - $cflags.=" -DOPENSSL_BN_ASM_PART_WORDS" if ($target{bn_obj} =~ /bn-586/); - $cflags.=" -DOPENSSL_IA32_SSE2" if (!$no_sse2 && $target{bn_obj} =~ /86/); + $config{cflags}.=" -DOPENSSL_BN_ASM_PART_WORDS" if ($target{bn_obj} =~ /bn-586/); + $config{cflags}.=" -DOPENSSL_IA32_SSE2" if (!$no_sse2 && $target{bn_obj} =~ /86/); - $cflags.=" -DOPENSSL_BN_ASM_MONT" if ($target{bn_obj} =~ /-mont/); - $cflags.=" -DOPENSSL_BN_ASM_MONT5" if ($target{bn_obj} =~ /-mont5/); - $cflags.=" -DOPENSSL_BN_ASM_GF2m" if ($target{bn_obj} =~ /-gf2m/); + $config{cflags}.=" -DOPENSSL_BN_ASM_MONT" if ($target{bn_obj} =~ /-mont/); + $config{cflags}.=" -DOPENSSL_BN_ASM_MONT5" if ($target{bn_obj} =~ /-mont5/); + $config{cflags}.=" -DOPENSSL_BN_ASM_GF2m" if ($target{bn_obj} =~ /-gf2m/); - if ($fips) { + if ($config{fips}) { push @{$config{openssl_other_defines}}, "OPENSSL_FIPS"; } if ($target{sha1_obj} =~ /\.o$/) { - $cflags.=" -DSHA1_ASM" if ($target{sha1_obj} =~ /sx86/ || $target{sha1_obj} =~ /sha1/); - $cflags.=" -DSHA256_ASM" if ($target{sha1_obj} =~ /sha256/); - $cflags.=" -DSHA512_ASM" if ($target{sha1_obj} =~ /sha512/); + $config{cflags}.=" -DSHA1_ASM" if ($target{sha1_obj} =~ /sx86/ || $target{sha1_obj} =~ /sha1/); + $config{cflags}.=" -DSHA256_ASM" if ($target{sha1_obj} =~ /sha256/); + $config{cflags}.=" -DSHA512_ASM" if ($target{sha1_obj} =~ /sha512/); if ($target{sha1_obj} =~ /sse2/) { if ($no_sse2) { $target{sha1_obj} =~ s/\S*sse2\S+//; - } elsif ($cflags !~ /OPENSSL_IA32_SSE2/) { - $cflags.=" -DOPENSSL_IA32_SSE2"; + } elsif ($config{cflags} !~ /OPENSSL_IA32_SSE2/) { + $config{cflags}.=" -DOPENSSL_IA32_SSE2"; } } } if ($target{md5_obj} =~ /\.o$/) { - $cflags.=" -DMD5_ASM"; + $config{cflags}.=" -DMD5_ASM"; } $target{cast_obj}=$table{BASE}->{cast_obj} if (!$config{no_shared}); # CAST assembler is not PIC if ($target{rmd160_obj} =~ /\.o$/) { - $cflags.=" -DRMD160_ASM"; + $config{cflags}.=" -DRMD160_ASM"; } if ($target{aes_obj} =~ /\.o$/) { - $cflags.=" -DAES_ASM" if ($target{aes_obj} =~ m/\baes\-/);; + $config{cflags}.=" -DAES_ASM" if ($target{aes_obj} =~ m/\baes-/);; # aes-ctr.o is not a real file, only indication that assembler # module implements AES_ctr32_encrypt... - $cflags.=" -DAES_CTR_ASM" if ($target{aes_obj} =~ s/\s*aes\-ctr\.o//); + $config{cflags}.=" -DAES_CTR_ASM" if ($target{aes_obj} =~ s/\s*aes-ctr\.o//); # aes-xts.o indicates presence of AES_xts_[en|de]crypt... - $cflags.=" -DAES_XTS_ASM" if ($target{aes_obj} =~ s/\s*aes\-xts\.o//); - $target{aes_obj} =~ s/\s*(vpaes|aesni)\-x86\.o//g if ($no_sse2); - $cflags.=" -DVPAES_ASM" if ($target{aes_obj} =~ m/vpaes/); - $cflags.=" -DBSAES_ASM" if ($target{aes_obj} =~ m/bsaes/); + $config{cflags}.=" -DAES_XTS_ASM" if ($target{aes_obj} =~ s/\s*aes-xts\.o//); + $target{aes_obj} =~ s/\s*(vpaes|aesni)-x86\.o//g if ($no_sse2); + $config{cflags}.=" -DVPAES_ASM" if ($target{aes_obj} =~ m/vpaes/); + $config{cflags}.=" -DBSAES_ASM" if ($target{aes_obj} =~ m/bsaes/); } if ($target{wp_obj} =~ /mmx/ && $config{processor} eq "386") { $target{wp_obj}=$table{BASE}->{wp_obj}; } elsif (!$disabled{"whirlpool"}) { - $cflags.=" -DWHIRLPOOL_ASM"; + $config{cflags}.=" -DWHIRLPOOL_ASM"; } - if ($target{modes_obj} =~ /ghash\-/) { - $cflags.=" -DGHASH_ASM"; + if ($target{modes_obj} =~ /ghash-/) { + $config{cflags}.=" -DGHASH_ASM"; } if ($target{ec_obj} =~ /ecp_nistz256/) { - $cflags.=" -DECP_NISTZ256_ASM"; + $config{cflags}.=" -DECP_NISTZ256_ASM"; } if ($target{poly1305_obj} =~ /\.o$/) { - $cflags.=" -DPOLY1305_ASM"; + $config{cflags}.=" -DPOLY1305_ASM"; } } +$config{makedepprog} = "makedepend"; +if ($target{cc} eq "gcc" || ($target{cc} eq 'cc' && $config{target} =~ /darwin/)) { + $config{makedepprog} = $target{cc}; +} +# On different platforms, shared library suffixes takes interesting forms. +# On Most Unixen, it's .so.{version} or .sl.{version}, while on MacOS X, +# it's .{version}.dylib. We're want to separate the two so we can calculate +# symlinks. +# FIXME: is this actually needed any more? Makefile.shared seems to just +# symlink a file name without SOVER to the file with full SOVER, nothing in +# between. +if ($target{shared_extension} =~ /^(|(?\.s[ol])(?\..*)|(?\..*)(?\.dylib))$/) { + my @vernums = split /\./, $+{v}; + shift @vernums; # Because the initial period in shlib_extension. + my @s = (); + while (@vernums) { + pop @vernums; + push @s, join(".", $+{e} eq ".dylib" ? "" : $+{e}, + @vernums, + $+{e} eq ".dylib" ? $+{e} : () ); + } + $config{shared_link_extensions} = join(" ", @s); +} else { + $config{shared_link_extensions} = ""; +} +$config{depflags} =~ s/^\s*//; + # Deal with bn_ops ################################################### @@ -1157,45 +1233,13 @@ foreach (sort split(/\s+/,$target{bn_ops})) { # "Stringify" the C flags string. This permits it to be made part of a string # and works as well on command lines. -$cflags =~ s/([\\\"])/\\\1/g; - -$config{version} = "unknown"; -$config{version_num} = "unknown"; -$config{major} = "unknown"; -$config{minor} = "unknown"; -$config{shlib_version_number} = "unknown"; -$config{shlib_version_history} = "unknown"; -$config{shlib_major} = "unknown"; -$config{shlib_minor} = "unknown"; - -open(IN,') - { - $config{version}=$1 if /OPENSSL.VERSION.TEXT.*OpenSSL (\S+) /; - $config{version_num}=$1 if /OPENSSL.VERSION.NUMBER.*(0x\S+)/; - $config{shlib_version_number}=$1 if /SHLIB_VERSION_NUMBER *"([^"]+)"/; - $config{shlib_version_history}=$1 if /SHLIB_VERSION_HISTORY *"([^"]*)"/; - } -close(IN); -if ($config{shlib_version_history} ne "") { $config{shlib_version_history} .= ":"; } - -if ($config{version} =~ /(^[0-9]*)\.([0-9\.]*)/) - { - $config{major}=$1; - $config{minor}=$2; - } - -if ($config{shlib_version_number} =~ /(^[0-9]*)\.([0-9\.]*)/) - { - $config{shlib_major}=$1; - $config{shlib_minor}=$2; - } +$config{cflags} =~ s/([\\\"])/\\\1/g; -if (defined($api)) { - $config{openssl_api_defines} = [ "OPENSSL_MIN_API=".$apitable->{$api} ]; - my $apiflag = sprintf("-DOPENSSL_API_COMPAT=%s", $apitable->{$api}); +if (defined($config{api})) { + $config{openssl_api_defines} = [ "OPENSSL_MIN_API=".$apitable->{$config{api}} ]; + my $apiflag = sprintf("-DOPENSSL_API_COMPAT=%s", $apitable->{$config{api}}); $default_depflags .= " $apiflag"; - $cflags .= " $apiflag"; + $config{cflags} .= " $apiflag"; } my $ecc = $target{cc}; @@ -1207,24 +1251,24 @@ if ($strict_warnings) die "ERROR --strict-warnings requires gcc or clang" unless ($ecc =~ /gcc(-\d(\.\d)*)?$/ or $ecc =~ /clang$/); foreach $wopt (split /\s+/, $gcc_devteam_warn) { - $cflags .= " $wopt" unless ($cflags =~ /(^|\s)$wopt(\s|$)/) + $config{cflags} .= " $wopt" unless ($config{cflags} =~ /(^|\s)$wopt(\s|$)/) } if ($ecc eq "clang") { foreach $wopt (split /\s+/, $clang_devteam_warn) { - $cflags .= " $wopt" unless ($cflags =~ /(^|\s)$wopt(\s|$)/) + $config{cflags} .= " $wopt" unless ($config{cflags} =~ /(^|\s)$wopt(\s|$)/) } } if ($target !~ /^mingw/) { foreach $wopt (split /\s+/, $memleak_devteam_backtrace) { - $cflags .= " $wopt" unless ($cflags =~ /(^|\s)$wopt(\s|$)/) + $config{cflags} .= " $wopt" unless ($config{cflags} =~ /(^|\s)$wopt(\s|$)/) } if ($target =~ /^BSD-/) { - $lflags .= " -lexecinfo"; + $config{lflags} .= " -lexecinfo"; } } } @@ -1241,7 +1285,7 @@ use warnings; use Exporter; #use vars qw(\@ISA \@EXPORT); our \@ISA = qw(Exporter); -our \@EXPORT = qw(\%config \%target); +our \@EXPORT = qw(\%config \%target %withargs); EOF print OUT "our %config = (\n"; @@ -1271,126 +1315,28 @@ foreach (sort keys %target) { print OUT <<"EOF"; ); -1; EOF -close(OUT); - -open(IN,"$Makefile.new") || die "unable to create $Makefile.new:$!\n"; -print OUT "### Generated automatically from Makefile.in by Configure.\n\n"; -my $sdirs=0; +print OUT "our %withargs = (\n"; +foreach (sort keys %withargs) { + if (ref($withargs{$_}) eq "ARRAY") { + print OUT " ", $_, " => [ ", join(", ", + map { quotify("perl", $_) } + @{$withargs{$_}}), " ],\n"; + } else { + print OUT " ", $_, " => ", quotify("perl", $withargs{$_}), ",\n" + } +} +print OUT <<"EOF"; +); -while () - { - chomp; - $sdirs = 1 if /^SDIRS=/; - if ($sdirs) { - my $dir; - foreach $dir (@skip) { - s/(\s)$dir /$1/; - s/\s$dir$//; - } - } - $sdirs = 0 unless /\\$/; - s/fips // if (/^DIRS=/ && !$fips); - s/engines // if (/^DIRS=/ && $disabled{"engine"}); - s/^VERSION=.*/VERSION=$config{version}/; - s/^MAJOR=.*/MAJOR=$config{major}/; - s/^MINOR=.*/MINOR=$config{minor}/; - s/^SHLIB_VERSION_NUMBER=.*/SHLIB_VERSION_NUMBER=$config{shlib_version_number}/; - s/^SHLIB_VERSION_HISTORY=.*/SHLIB_VERSION_HISTORY=$config{shlib_version_history}/; - s/^SHLIB_MAJOR=.*/SHLIB_MAJOR=$config{shlib_major}/; - s/^SHLIB_MINOR=.*/SHLIB_MINOR=$config{shlib_minor}/; - s/^SHLIB_EXT=.*/SHLIB_EXT=$target{shared_extension}/; - s/^INSTALLTOP=.*$/INSTALLTOP=$config{prefix}/; - s/^MULTILIB=.*$/MULTILIB=$target{multilib}/; - s/^OPENSSLDIR=.*$/OPENSSLDIR=$config{openssldir}/; - s/^LIBDIR=.*$/LIBDIR=$libdir/; - s/^INSTALL_PREFIX=.*$/INSTALL_PREFIX=$install_prefix/; - s/^PLATFORM=.*$/PLATFORM=$target/; - s/^OPTIONS=.*$/OPTIONS=$config{options}/; - my $argvstring = "(".join(", ", map { quotify("perl", $_) } @argvcopy).")"; - s/^CONFIGURE_ARGS=.*$/CONFIGURE_ARGS=$argvstring/; - if ($config{cross_compile_prefix}) - { - s/^CC=.*$/CROSS_COMPILE= $config{cross_compile_prefix}\nCC= \$\(CROSS_COMPILE\)$target{cc}/; - s/^AR=\s*/AR= \$\(CROSS_COMPILE\)/; - s/^NM=\s*/NM= \$\(CROSS_COMPILE\)/; - s/^RANLIB=\s*/RANLIB= \$\(CROSS_COMPILE\)/; - s/^MAKEDEPPROG=.*$/MAKEDEPPROG= \$\(CROSS_COMPILE\)$target{cc}/ if $target{cc} eq "gcc"; - } - else { - s/^CC=.*$/CC= $target{cc}/; - s/^AR=\s*ar/AR= $target{ar}/; - s/^RANLIB=.*/RANLIB= $target{ranlib}/; - s/^MAKEDEPPROG=.*$/MAKEDEPPROG= $target{cc}/ if $ecc eq "gcc" || $ecc eq "clang"; - } - s/^CFLAG=.*$/CFLAG= $cflags/; - s/^DEPFLAG=.*$/DEPFLAG=$depflags/; - s/^PEX_LIBS=.*$/PEX_LIBS= $prelflags/; - s/^EX_LIBS=.*$/EX_LIBS= $lflags/; - s/^EXE_EXT=.*$/EXE_EXT= $exe_ext/; - s/^CPUID_OBJ=.*$/CPUID_OBJ= $target{cpuid_obj}/; - s/^BN_ASM=.*$/BN_ASM= $target{bn_obj}/; - s/^EC_ASM=.*$/EC_ASM= $target{ec_obj}/; - s/^DES_ENC=.*$/DES_ENC= $target{des_obj}/; - s/^AES_ENC=.*$/AES_ENC= $target{aes_obj}/; - s/^BF_ENC=.*$/BF_ENC= $target{bf_obj}/; - s/^CAST_ENC=.*$/CAST_ENC= $target{cast_obj}/; - s/^RC4_ENC=.*$/RC4_ENC= $target{rc4_obj}/; - s/^RC5_ENC=.*$/RC5_ENC= $target{rc5_obj}/; - s/^MD5_ASM_OBJ=.*$/MD5_ASM_OBJ= $target{md5_obj}/; - s/^SHA1_ASM_OBJ=.*$/SHA1_ASM_OBJ= $target{sha1_obj}/; - s/^RMD160_ASM_OBJ=.*$/RMD160_ASM_OBJ= $target{rmd160_obj}/; - s/^WP_ASM_OBJ=.*$/WP_ASM_OBJ= $target{wp_obj}/; - s/^CMLL_ENC=.*$/CMLL_ENC= $target{cmll_obj}/; - s/^MODES_ASM_OBJ.=*$/MODES_ASM_OBJ= $target{modes_obj}/; - s/^ENGINES_ASM_OBJ.=*$/ENGINES_ASM_OBJ= $target{engines_obj}/; - s/^CHACHA_ENC=.*$/CHACHA_ENC= $target{chacha_obj}/; - s/^POLY1305_ASM_OBJ=.*$/POLY1305_ASM_OBJ= $target{poly1305_obj}/; - s/^PERLASM_SCHEME=.*$/PERLASM_SCHEME= $target{perlasm_scheme}/; - s/^PROCESSOR=.*/PROCESSOR= $config{processor}/; - s/^ARFLAGS=.*/ARFLAGS= $target{arflags}/; - s/^PERL=.*/PERL= $config{perl}/; - s/^LIBZLIB=.*/LIBZLIB=$withargs{"zlib-lib"}/; - s/^ZLIB_INCLUDE=.*/ZLIB_INCLUDE=$withargs{"zlib-include"}/; - s/^FIPSLIBDIR=.*/FIPSLIBDIR=$fipslibdir/; - s/^FIPSCANLIB=.*/FIPSCANLIB=libcrypto/ if $fips; - s/^SHARED_FIPS=.*/SHARED_FIPS=/; - s/^SHLIBDIRS=.*/SHLIBDIRS= crypto ssl/; - s/^BASEADDR=.*/BASEADDR=$baseaddr/; - s/^SHLIB_TARGET=.*/SHLIB_TARGET=$target{shared_target}/; - s/^SHLIB_MARK=.*/SHLIB_MARK=$shared_mark/; - s/^SHARED_LIBS=.*/SHARED_LIBS=\$(SHARED_CRYPTO) \$(SHARED_SSL)/ if (!$config{no_shared}); - if ($target{shared_extension} ne "" && $target{shared_extension} =~ /^\.s([ol])\.[^\.]*$/) - { - my $sotmp = $1; - s/^SHARED_LIBS_LINK_EXTS=.*/SHARED_LIBS_LINK_EXTS=.s$sotmp/; - } - elsif ($target{shared_extension} ne "" && $target{shared_extension} =~ /^\.[^\.]*\.dylib$/) - { - s/^SHARED_LIBS_LINK_EXTS=.*/SHARED_LIBS_LINK_EXTS=.dylib/; - } - elsif ($target{shared_extension} ne "" && $target{shared_extension} =~ /^\.s([ol])\.[^\.]*\.[^\.]*$/) - { - my $sotmp = $1; - s/^SHARED_LIBS_LINK_EXTS=.*/SHARED_LIBS_LINK_EXTS=.s$sotmp.\$(SHLIB_MAJOR) .s$sotmp/; - } - elsif ($target{shared_extension} ne "" && $target{shared_extension} =~ /^\.[^\.]*\.[^\.]*\.dylib$/) - { - s/^SHARED_LIBS_LINK_EXTS=.*/SHARED_LIBS_LINK_EXTS=.\$(SHLIB_MAJOR).dylib .dylib/; - } - s/^SHARED_LDFLAGS=.*/SHARED_LDFLAGS=$target{shared_ldflag}/; - print OUT $_."\n"; - } -close(IN); +1; +EOF close(OUT); -rename("$Makefile.new",$Makefile) || die "unable to rename $Makefile.new\n"; print "IsMK1MF =", ($target{build_scheme}->[0] eq "mk1mf" ? "yes" : "no"), "\n"; print "CC =$target{cc}\n"; -print "CFLAG =$cflags\n"; -print "EX_LIBS =$lflags\n"; +print "CFLAG =$config{cflags}\n"; +print "EX_LIBS =$config{lflags}\n"; print "CPUID_OBJ =$target{cpuid_obj}\n"; print "BN_ASM =$target{bn_obj}\n"; print "EC_ASM =$target{ec_obj}\n"; @@ -1413,23 +1359,15 @@ print "RANLIB =$target{ranlib}\n"; print "ARFLAGS =$target{arflags}\n"; print "PERL =$config{perl}\n"; -sub -run_dofile() -{ - my $in = shift; - my $out = shift; +run_dofile("$Makefile.in","$Makefile.new"); - # should we remove $out ? - system("$config{perl} -I. -Mconfigdata util/dofile.pl <$in >$out.new"); - exit 1 if $? != 0; - rename("$out.new", $out) || die "Can't rename $out.new, $!"; -} +run_dofile("include/openssl/opensslconf.h.in", "include/openssl/opensslconf.h"); -&run_dofile("include/openssl/opensslconf.h.in", "include/openssl/opensslconf.h"); +run_dofile("include/openssl/opensslconf.h.in", "include/openssl/opensslconf.h"); foreach my $alg ( 'bf', 'bn', 'des', 'rc4' ) { - &run_dofile("crypto/include/internal/${alg}_conf.h.in", - "crypto/include/internal/${alg}_conf.h"); + run_dofile("crypto/include/internal/${alg}_conf.h.in", + "crypto/include/internal/${alg}_conf.h"); } # Fix the date @@ -1480,10 +1418,10 @@ my %builders = ( unixmake => sub { my $make_command = "$make PERL=\'$config{perl}\'"; my $make_targets = ""; - $make_targets .= " depend" if $depflags ne $default_depflags && $make_depend; + $make_targets .= " depend" if $config{depflags} ne $default_depflags && $make_depend; (system $make_command.$make_targets) == 0 or die "make $make_targets failed" if $make_targets ne ""; - if ($depflags ne $default_depflags && !$make_depend) { + if ($config{depflags} ne $default_depflags && !$make_depend) { $warn_make_depend++; } }, @@ -1815,6 +1753,17 @@ sub usage exit(1); } +sub run_dofile() +{ + my $in = shift; + my $out = shift; + + # should we remove $out ? + system("$config{perl} -I. -Mconfigdata util/dofile.pl <$in >$out.new"); + exit 1 if $? != 0; + rename("$out.new", $out) || die "Can't rename $out.new, $!"; +} + # Configuration printer ############################################## sub print_table_entry @@ -1890,10 +1839,10 @@ sub which my $path; foreach $path (split /:/, $ENV{PATH}) { - if (-f "$path/$name$exe_ext" and -x _) + if (-f "$path/$name$target{exe_extension}" and -x _) { - return "$path/$name$exe_ext" unless ($name eq "perl" and - system("$path/$name$exe_ext -e " . '\'exit($]<5.0);\'')); + return "$path/$name$target{exe_extension}" unless ($name eq "perl" and + system("$path/$name$target{exe_extension} -e " . '\'exit($]<5.0);\'')); } } } @@ -2015,3 +1964,35 @@ sub quotify { map { $processor->($_); } @_; } + +# collect_information($filename, $line_continue, $regexp => $CODEref, ...) +# $filename is the file to read. +# $line_continue is either undef (which is a noop), or two arguments, where +# the first is a regexp detecting a line continuation ending, and the +# following argument is a CODEref that takes care of concatenating two +# lines. +# All following arguments are regex/CODEref pairs, where the regexp detects a +# line and the CODEref does something with the result of the regexp. +sub collect_information { + my $filename = shift; + my $line_continue_re = shift; + my $line_concat = defined($line_continue_re) ? shift : undef; + my %collectors = @_; + + my $saved_line = ""; + open IN, $filename || die "unable to read $filename: $!\n"; + while() { + chomp; + if (defined $line_concat) { + $_ = $line_concat->($saved_line, $_); + } + if (defined $line_continue_re && /$line_continue_re/) { + $saved_line = $_; + next; + } + foreach my $re (keys %collectors) { + if (/$re/) { $collectors{$re}->() }; + } + } + close IN; +} diff --git a/Makefile.in b/Makefile.in index 9278783c8d..e875f43bdc 100644 --- a/Makefile.in +++ b/Makefile.in @@ -2,18 +2,18 @@ ## Makefile for OpenSSL ## -VERSION= -MAJOR= -MINOR= -SHLIB_VERSION_NUMBER= -SHLIB_VERSION_HISTORY= -SHLIB_MAJOR= -SHLIB_MINOR= -SHLIB_EXT= -PLATFORM=dist -OPTIONS= -CONFIGURE_ARGS= -SHLIB_TARGET= +VERSION={- $config{version} -} +MAJOR={- $config{major} -} +MINOR={- $config{minor} -} +SHLIB_VERSION_NUMBER={- $config{shlib_version_number} -} +SHLIB_VERSION_HISTORY={- $config{shlib_version_history} -} +SHLIB_MAJOR={- $config{shlib_major} -} +SHLIB_MINOR={- $config{shlib_minor} -} +SHLIB_EXT={- $target{shared_extension} -} +PLATFORM={- $config{target} -} +OPTIONS={- $config{options} -} +CONFIGURE_ARGS=({- join(", ",quotify_l(@{$config{perlargv}})) -}) +SHLIB_TARGET={- $target{shared_target} -} # HERE indicates where this Makefile lives. This can be used to indicate # where sub-Makefiles are expected to be. Currently has very limited usage, @@ -23,12 +23,12 @@ HERE=. # INSTALL_PREFIX is for package builders so that they can configure # for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/. # Normally it is left empty. -INSTALL_PREFIX= +INSTALL_PREFIX={- $config{install_prefix} -} # Do not edit these manually. Use Configure with --prefix or --openssldir # to change this! Short explanation in the top comment in Configure -INSTALLTOP=/usr/local -OPENSSLDIR=$(INSTALLTOP)/ssl +INSTALLTOP={- $config{prefix} -} +OPENSSLDIR={- $config{openssldir} -} # NO_IDEA - Define to build without the IDEA algorithm # NO_RC4 - Define to build without the RC4 algorithm @@ -57,23 +57,24 @@ OPENSSLDIR=$(INSTALLTOP)/ssl # equal 4. # PKCS1_CHECK - pkcs1 tests. -CC= cc -CFLAG= -O -DEPFLAG= -PEX_LIBS= -EX_LIBS= -EXE_EXT= -ARFLAGS= -AR=ar $(ARFLAGS) r -RANLIB= ranlib -NM= nm -PERL= perl +CROSS_COMPILE= {- $config{cross_compile_prefix} -} +CC= $(CROSS_COMPILE){- $target{cc} -} +CFLAG= {- $config{cflags} -} +DEPFLAG= {- $config{depflags} -} +PEX_LIBS= {- $config{prelflags} -} +EX_LIBS= {- $config{lflags} -} +EXE_EXT= {- $target{exe_extension} -} +ARFLAGS= {- $target{arflags} -} +AR=$(CROSS_COMPILE){- $target{ar} -} $(ARFLAGS) r +RANLIB= {- $target{ranlib} -} +NM= $(CROSS_COMPILE){- $target{nm} -} +PERL= {- $config{perl} -} #RM= echo -- RM= rm -f TAR= tar TARFLAGS= --no-recursion -MAKEDEPPROG=makedepend -LIBDIR=lib +MAKEDEPPROG=$(CROSS_COMPILE){- $config{makedepprog} -} +LIBDIR={- $config{libdir} -} # We let the C compiler driver to take care of .s files. This is done in # order to be excused from maintaining a separate set of architecture @@ -85,32 +86,32 @@ ASFLAG=$(CFLAG) # For x86 assembler: Set PROCESSOR to 386 if you want to support # the 80386. -PROCESSOR= +PROCESSOR= {- $config{processor} -} # CPUID module collects small commonly used assembler snippets -CPUID_OBJ= -BN_ASM= bn_asm.o -EC_ASM= -DES_ENC= des_enc.o fcrypt_b.o -AES_ENC= aes_core.o aes_cbc.o -BF_ENC= bf_enc.o -CAST_ENC= c_enc.o -RC4_ENC= rc4_enc.o -RC5_ENC= rc5_enc.o -MD5_ASM_OBJ= -SHA1_ASM_OBJ= -RMD160_ASM_OBJ= -WP_ASM_OBJ= -CMLL_ENC= -MODES_ASM_OBJ= -ENGINES_ASM_OBJ= -CHACHA_ENC= chacha_enc.o -POLY1305_ASM_OBJ= -PERLASM_SCHEME= +CPUID_OBJ= {- $target{cpuid_obj} -} +BN_ASM= {- $target{bn_obj} -} +EC_ASM= {- $target{ec_obj} -} +DES_ENC= {- $target{des_obj} -} +AES_ENC= {- $target{aes_obj} -} +BF_ENC= {- $target{bf_obj} -} +CAST_ENC= {- $target{cast_obj} -} +RC4_ENC= {- $target{rc4_obj} -} +RC5_ENC= {- $target{rc5_obj} -} +MD5_ASM_OBJ= {- $target{md5_obj} -} +SHA1_ASM_OBJ= {- $target{sha1_obj} -} +RMD160_ASM_OBJ= {- $target{rmd160_obj} -} +WP_ASM_OBJ= {- $target{wp_obj} -} +CMLL_ENC= {- $target{cmll_obj} -} +MODES_ASM_OBJ= {- $target{modes_obj} -} +ENGINES_ASM_OBJ= {- $target{engines_obj} -} +CHACHA_ENC= {- $target{chacha_obj} -} +POLY1305_ASM_OBJ= {- $target{poly1305_obj} -} +PERLASM_SCHEME= {- $target{perlasm_scheme} -} # Zlib stuff -ZLIB_INCLUDE= -LIBZLIB= +ZLIB_INCLUDE={- $withargs{zlib-include} -} +LIBZLIB={- $withargs{zlib-lib} -} # This is the location of fipscanister.o and friends. # The FIPS module build will place it $(INSTALLTOP)/lib @@ -119,34 +120,25 @@ LIBZLIB= # $(INSTALLTOP) for this build may be different so hard # code the path. -FIPSLIBDIR=/usr/local/ssl/$(LIBDIR)/ +FIPSLIBDIR={- $config{fipslibdir} -} # The location of the library which contains fipscanister.o # normally it will be libcrypto. If not compiling in FIPS mode # at all this is empty making it a useful test for a FIPS compile. -FIPSCANLIB= +FIPSCANLIB={- $config{fips} ? "libcrypto" : "" -} # Shared library base address. Currently only used on Windows. # -BASEADDR= +BASEADDR={- $config{baseaddr} -} -DIRS= crypto ssl engines apps test tools +DIRS= {- join(" ", @{$config{dirs}}) -} SHLIBDIRS= crypto ssl INSTALL_SUBS= engines apps tools # dirs in crypto to build -SDIRS= \ - objects \ - md2 md4 md5 sha mdc2 hmac ripemd whrlpool poly1305 \ - des aes rc2 rc4 rc5 idea bf cast camellia seed chacha modes \ - bn ec rsa dsa dh dso engine \ - buffer bio stack lhash rand err \ - evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui \ - cms ts jpake srp store cmac ct async kdf -# keep in mind that the above list is adjusted by ./Configure -# according to no-xxx arguments... +SDIRS= {- join(" ", @{$config{sdirs}}) -} # tests to perform. "alltests" is a special word indicating that all tests # should be performed. @@ -166,9 +158,9 @@ TOP= . LIBS= libcrypto.a libssl.a SHARED_CRYPTO=libcrypto$(SHLIB_EXT) SHARED_SSL=libssl$(SHLIB_EXT) -SHARED_LIBS= -SHARED_LIBS_LINK_EXTS= -SHARED_LDFLAGS= +SHARED_LIBS={- '$(SHARED_CRYPTO) $(SHARED_SSL)' if (!$config{no_shared}) -} +SHARED_LIBS_LINK_EXTS={- $config{shared_link_extensions} -} +SHARED_LDFLAGS={- $target{shared_ldflag} -} GENERAL= Makefile BASENAME= openssl diff --git a/util/dofile.pl b/util/dofile.pl index 617c09ce65..a6b0905a58 100644 --- a/util/dofile.pl +++ b/util/dofile.pl @@ -99,6 +99,7 @@ my $template = Text::Template->new(TYPE => 'STRING', SOURCE => $text ); $template->fill_in(OUTPUT => \*STDOUT, HASH => { config => \%config, target => \%target, + withargs => \%withargs, quotify1 => \"ify1, quotify_l => \"ify_l }, DELIMITERS => [ "{-", "-}" ],