This would tend to cause memory overwrites since SSLv3 has
a maximum packet size of 16k. If your program uses
buffers <= 16k, you would probably never see this problem.
- - Fixed a new errors that were cause by malloc() not returning
+ - Fixed a few errors that were cause by malloc() not returning
0 initialised memory..
- SSL_OP_NETSCAPE_CA_DN_BUG was being switched on when using
SSL_CTX_set_options(ssl_ctx,SSL_OP_ALL); which was a bad thing
if (secret_key && !secret_keyid)
{
- BIO_printf(bio_err, "No sectre key id\n");
+ BIO_printf(bio_err, "No secret key id\n");
goto end;
}
return p->extension_error;
if (ctx2)
{
- BIO_printf(p->biodebug,"Swiching server context.\n");
+ BIO_printf(p->biodebug,"Switching server context.\n");
SSL_set_SSL_CTX(s,ctx2);
}
}
#if defined(OPENSSL_SYS_WIN32) || defined(OPENSSL_SYS_WIN16)
/* A hack to make Visual C++ 5.0 work correctly when linking as
* a DLL using /MT. Without this, the application cannot use
- * and floating point printf's.
+ * any floating point printf's.
* It also seems to be needed for Visual C 1.5 (win16) */
SSLeay_MSVC5_hack=(double)name[0]*(double)name[1];
#endif
* XXX This should be in CRYPTO_mem_leaks_cb,
* and CRYPTO_mem_leaks should be implemented by
* using CRYPTO_mem_leaks_cb.
- * (Also their should be a variant of lh_doall_arg
+ * (Also there should be a variant of lh_doall_arg
* that takes a function pointer instead of a void *;
* this would obviate the ugly and illegal
* void_fn_to_char kludge in CRYPTO_mem_leaks_cb.
#endif /* defined OPENSSL_SYS_VMS */
-/* Case insensiteve linking causes problems.... */
+/* Case insensitive linking causes problems.... */
#if defined(OPENSSL_SYS_VMS) || defined(OPENSSL_SYS_OS2)
#undef ERR_load_CRYPTO_strings
#define ERR_load_CRYPTO_strings ERR_load_CRYPTOlib_strings
sk_X509_NAME_ENTRY_num(rnm) - 1)->set)
{
X509V3err(X509V3_F_SET_DIST_POINT_NAME,
- X509V3_R_INVAID_MULTIPLE_RDNS);
+ X509V3_R_INVALID_MULTIPLE_RDNS);
goto err;
}
}
{
if (*language)
{
- X509V3err(X509V3_F_PROCESS_PCI_VALUE,X509V3_R_POLICY_LANGUAGE_ALREADTY_DEFINED);
+ X509V3err(X509V3_F_PROCESS_PCI_VALUE,X509V3_R_POLICY_LANGUAGE_ALREADY_DEFINED);
X509V3_conf_err(val);
return 0;
}
{
if (*pathlen)
{
- X509V3err(X509V3_F_PROCESS_PCI_VALUE,X509V3_R_POLICY_PATH_LENGTH_ALREADTY_DEFINED);
+ X509V3err(X509V3_F_PROCESS_PCI_VALUE,X509V3_R_POLICY_PATH_LENGTH_ALREADY_DEFINED);
X509V3_conf_err(val);
return 0;
}
their size can grow indefinitely.
Every read from a read write memory BIO will remove the data just read with
-an internal copy operation, if a BIO contains a lots of data and it is
+an internal copy operation, if a BIO contains a lot of data and it is
read in small chunks the operation can be very slow. The use of a read only
memory BIO avoids this problem. If the BIO must be read write then adding
a buffering BIO to the chain will speed up the process.
==== readme ========================================================
This is the old 0.6.6 docuementation. Most of the cipher stuff is still
-relevent but I'm working (very slowly) on new docuemtation.
+relevent but I'm working (very slowly) on new documentation.
The current version can be found online at
http://www.cryptsoft.com/ssleay/doc
can all be compiled independantly.
ssleay has 3 modes of operation.
-1) If the ssleay binaray has the name of one of its component programs, it
-executes that program and then exits. This can be achieve by using hard or
+1) If the ssleay binary has the name of one of its component programs, it
+executes that program and then exits. This can be achieved by using hard or
symbolic links, or failing that, just renaming the binary.
2) If the first argument to ssleay is the name of one of the component
programs, that program runs that program and then exits.
example is for BIO_s_sock(). A socket needs to be
assigned to the BIO before it can be used.
- 'shutdown', this flag indicates if the underlying
- comunication primative being used should be closed/freed
+ communication primitive being used should be closed/freed
when the BIO is closed.
- 'flags' is used to hold extra state. It is primarily used
to hold information about why a non-blocking operation
unsigned long BN_get_word(BIGNUM *a);
Returns 'a' in an unsigned long. Not remarkably, often 'a' will
- be biger than a word, in which case 0xffffffffL is returned.
+ be bigger than a word, in which case 0xffffffffL is returned.
Word Operations
These functions are much more efficient that the normal bignum arithmetic
PEM_ASN1_write((int (*)())i2d_X509,PEM_STRING_X509,fp, \
(char *)x, NULL,NULL,0,NULL)
Don't do encryption normally. If you want to PEM encrypt your X509 structure,
-either just call PEM_ASN1_write directly or just define you own
+either just call PEM_ASN1_write directly or just define your own
macro variant. As you can see, this macro just sets all encryption related
parameters to NULL.
The SSL_CTX has a session_cache_mode which is by default,
in SSL_SESS_CACHE_SERVER mode. What this means is that the library
-will automatically add new session-id's to the cache apon sucsessful
+will automatically add new session-id's to the cache upon successful
SSL_accept() calls.
If SSL_SESS_CACHE_CLIENT is set, then client certificates are also added
to the cache.
If SSL_SESS_CACHE_NO_AUTO_CLEAR is set, old timed out sessions are
not automatically removed each 255, SSL_connect()s or SSL_accept()s.
-By default, apon every 255 successful SSL_connect() or SSL_accept()s,
+By default, upon every 255 successful SSL_connect() or SSL_accept()s,
the cache is flush. Please note that this could be expensive on
a heavily loaded SSL server, in which case, turn this off and
clear the cache of old entries 'manually' (with one of the functions
listed below) every few hours. Perhaps I should up this number, it is hard
-to say. Remember, the '255' new calls is just a mechanims to get called
+to say. Remember, the '255' new calls is just a mechanism to get called
every now and then, in theory at most 255 new session-id's will have been
added but if 100 are added every minute, you would still have
500 in the cache before any would start being flushed (assuming a 3 minute
void SSL_CTX_sess_set_get_cb(ctx,cb) sets the callback and
int (*cb)()SSL_CTX_sess_get_get_cb(ctx) returns the callback.
-These callbacks are basically indended to be used by processes to
+These callbacks are basically intended to be used by processes to
send their session-id's to other processes. I currently have not implemented
-non-blocking semantics for these callbacks, it is upto the appication
-to make the callbacks effiecent if they require blocking (perhaps
+non-blocking semantics for these callbacks, it is upto the application
+to make the callbacks efficient if they require blocking (perhaps
by 'saving' them and then 'posting them' when control returns from
the SSL_accept().
condition has dissapeared.
After the connection has been made, information can be retrived about the
-SSL session and the session-id values that have been decided apon.
+SSL session and the session-id values that have been decided upon.
The 'peer' certificate can be retrieved.
The session-id values include
/********************************************************************
The Microsoft section
********************************************************************/
-/* The following is used becaue of the small stack in some
+/* The following is used because of the small stack in some
* Microsoft operating systems */
#if defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYSNAME_WIN32)
# define MS_STATIC static
# if !defined(OPENSSL_NO_SOCK) && defined(_WIN32_WINNT)
/*
* Just like defining _WIN32_WINNT including winsock2.h implies
- * certain "discipline" for maintaing [broad] binary compatibility.
+ * certain "discipline" for maintaining [broad] binary compatibility.
* As long as structures are invariant among Winsock versions,
* it's sufficient to check for specific Winsock2 API availability
* at run-time [DSO_global_lookup is recommended]...
*/
# include <winsock2.h>
# include <ws2tcpip.h>
- /* yes, they have to be #included prior <windows.h> */
+ /* yes, they have to be #included prior to <windows.h> */
# endif
# include <windows.h>
# include <stdio.h>
# define DEFAULT_HOME "C:"
# endif
-#else /* The non-microsoft world world */
+#else /* The non-microsoft world */
# ifdef OPENSSL_SYS_VMS
# define VMS 1
#define OPENSSL_EXTERN OPENSSL_IMPORT
/* Macros to allow global variables to be reached through function calls when
- required (if a shared library version requvres it, for example.
+ required (if a shared library version requires it, for example.
The way it's done allows definitions like this:
// in foobar.c
/* Computes Diffie-Hellman key and stores it into buffer in
* little-endian byte order as expected by both versions of GOST 94
- * algorigthm
+ * algorithm
*/
static int compute_pair_key_le(unsigned char *pair_key,BIGNUM *pub_key,DH *dh)
{
* Copyright (c) 2005-2006 Cryptocom LTD *
* This file is distributed under the same license as OpenSSL *
* *
- * Implementation of GOST R 34.10-94 signature algoritgthm *
+ * Implementation of GOST R 34.10-94 signature algorithm *
* for OpenSSL *
* Requires OpenSSL 0.9.9 for compilation *
**********************************************************************/
The results will be in the out directory.
-These makefiles and def files were generated my typing
+These makefiles and def files were generated by typing
perl util\mk1mf.pl VC-NT >ms/nt.mak
perl util\mk1mf.pl VC-NT dll >ms/ntdll.mak
if (!ssl3_digest_cached_records(s))
return 0;
- /* Search for djgest of specified type in the handshake_dgst
+ /* Search for digest of specified type in the handshake_dgst
* array*/
for (i=0;i<SSL_MAX_DIGEST;i++)
{
}
else if (i <= 0) {
if (s->version == DTLS1_VERSION) {
- /* For DTLS, just drop it. That's kind of the wh
-ole
+ /* For DTLS, just drop it. That's kind of the whole
point in using a datagram service */
wb->left = 0;
}
More number for the questions about SSL overheads....
-The following numbers were generated on a pentium pro 200, running linux.
+The following numbers were generated on a Pentium pro 200, running Linux.
They give an indication of the SSL protocol and encryption overheads.
The program that generated them is an unreleased version of ssl/ssltest.c
How do I read this? The protocol and cipher are reasonable obvious.
The next number is the number of connections being made. The next is the
-number of bytes exchanged bewteen the client and server side of the protocol.
+number of bytes exchanged between the client and server side of the protocol.
This is the number of bytes that the client sends to the server, and then
the server sends back. Because this is all happening in one process,
the data is being encrypted, decrypted, encrypted and then decrypted again.
What does this all mean? Well for a server, with no session-id reuse, with
a transfer size of 10240 bytes, using RC4-MD5 and a 512bit server key,
-a pentium pro 200 running linux can handle the SSLv3 protocol overheads of
+a Pentium pro 200 running Linux can handle the SSLv3 protocol overheads of
about 49 connections a second. Reality will be quite different :-).
-Remeber the first number is 1000 full ssl handshakes, the second is
+Remember the first number is 1000 full ssl handshakes, the second is
1 full and 999 with session-id reuse. The RSA overheads for each exchange
would be one public and one private operation, but the protocol/MAC/cipher
cost would be quite similar in both the client and server.
killer in SSL. Often delays in the TCP protocol will make session-id
reuse look slower that new sessions, but this would not be the case on
a loaded server.
-- The TCP round trip latencies, while slowing indervidual connections,
+- The TCP round trip latencies, while slowing individual connections,
would have minimal impact on throughput.
- Instead of sending one 102400 byte buffer, one 8k buffer is sent until
- the required number of bytes are processed.
-- The SSLv3 connections were actually SSLv2 compatable SSLv3 headers.
+- The SSLv3 connections were actually SSLv2 compatible SSLv3 headers.
- A 512bit server key was being used except where noted.
- No server key verification was being performed on the client side of the
protocol. This would slow things down very little.
- The library being used is SSLeay 0.8.x.
-- The normal mesauring system was commands of the form
+- The normal measuring system was commands of the form
time ./ssltest -num 1000 -bytes 102400 -cipher DES-CBC-SHA -reuse
This modified version of ssltest should be in the next public release of
SSLeay.
-The general cipher performace number for this platform are
+The general cipher performance number for this platform are
SSLeay 0.8.2a 04-Sep-1997
built on Fri Sep 5 17:37:05 EST 1997
des_encrypt3(&data[0],key1,key2,key3);
}
- printf("des %d %d (%d)\n",
+ printf("des3 %d %d (%d)\n",
e1-s1,e2-s2,((e2-s2)-(e1-s1)));
}
}
projects / openssl.git / commitdiff