X-Git-Url: https://git.openssl.org/?p=openssl.git;a=blobdiff_plain;f=ssl%2Fssl.h;h=0866fb6b2b86918c286e1ac16a54cbcb8578c89d;hp=261dcf8a48f06f40c1b66018d48dfb548f7fd862;hb=a08ced78c84509fe305d57d8257af4df8576585c;hpb=af57d843124672a9053a4da60ad7f9b6d4324a5a diff --git a/ssl/ssl.h b/ssl/ssl.h index 261dcf8a48..0866fb6b2b 100644 --- a/ssl/ssl.h +++ b/ssl/ssl.h @@ -55,16 +55,140 @@ * copied and put under another distribution licence * [including the GNU Public Licence.] */ +/* ==================================================================== + * Copyright (c) 1998-2001 The OpenSSL Project. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * 3. All advertising materials mentioning features or use of this + * software must display the following acknowledgment: + * "This product includes software developed by the OpenSSL Project + * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" + * + * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to + * endorse or promote products derived from this software without + * prior written permission. For written permission, please contact + * openssl-core@openssl.org. + * + * 5. Products derived from this software may not be called "OpenSSL" + * nor may "OpenSSL" appear in their names without prior written + * permission of the OpenSSL Project. + * + * 6. Redistributions of any form whatsoever must retain the following + * acknowledgment: + * "This product includes software developed by the OpenSSL Project + * for use in the OpenSSL Toolkit (http://www.openssl.org/)" + * + * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY + * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR + * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + * ==================================================================== + * + * This product includes cryptographic software written by Eric Young + * (eay@cryptsoft.com). This product includes software written by Tim + * Hudson (tjh@cryptsoft.com). + * + */ +/* ==================================================================== + * Copyright (c) 1998-2002 The OpenSSL Project. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * 3. All advertising materials mentioning features or use of this + * software must display the following acknowledgment: + * "This product includes software developed by the OpenSSL Project + * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" + * + * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to + * endorse or promote products derived from this software without + * prior written permission. For written permission, please contact + * openssl-core@openssl.org. + * + * 5. Products derived from this software may not be called "OpenSSL" + * nor may "OpenSSL" appear in their names without prior written + * permission of the OpenSSL Project. + * + * 6. Redistributions of any form whatsoever must retain the following + * acknowledgment: + * "This product includes software developed by the OpenSSL Project + * for use in the OpenSSL Toolkit (http://www.openssl.org/)" + * + * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY + * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR + * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + * ==================================================================== + * + * This product includes cryptographic software written by Eric Young + * (eay@cryptsoft.com). This product includes software written by Tim + * Hudson (tjh@cryptsoft.com). + * + */ +/* ==================================================================== + * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED. + * ECC cipher suite support in OpenSSL originally developed by + * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project. + */ #ifndef HEADER_SSL_H #define HEADER_SSL_H +#include + +#ifndef OPENSSL_NO_COMP +#include +#endif +#ifndef OPENSSL_NO_BIO +#include +#endif +#ifndef OPENSSL_NO_X509 +#include +#endif +#include +#include +#include + #ifdef __cplusplus extern "C" { #endif -#include - /* SSLeay version number for ASN.1 encoding of the session information */ /* Version 0 - initial version * Version 1 - added the optional peer certificate @@ -83,6 +207,32 @@ extern "C" { #define SSL_TXT_DES_192_EDE3_CBC_WITH_MD5 SSL2_TXT_DES_192_EDE3_CBC_WITH_MD5 #define SSL_TXT_DES_192_EDE3_CBC_WITH_SHA SSL2_TXT_DES_192_EDE3_CBC_WITH_SHA +/* VRS Additional Kerberos5 entries + */ +#define SSL_TXT_KRB5_DES_64_CBC_SHA SSL3_TXT_KRB5_DES_64_CBC_SHA +#define SSL_TXT_KRB5_DES_192_CBC3_SHA SSL3_TXT_KRB5_DES_192_CBC3_SHA +#define SSL_TXT_KRB5_RC4_128_SHA SSL3_TXT_KRB5_RC4_128_SHA +#define SSL_TXT_KRB5_IDEA_128_CBC_SHA SSL3_TXT_KRB5_IDEA_128_CBC_SHA +#define SSL_TXT_KRB5_DES_64_CBC_MD5 SSL3_TXT_KRB5_DES_64_CBC_MD5 +#define SSL_TXT_KRB5_DES_192_CBC3_MD5 SSL3_TXT_KRB5_DES_192_CBC3_MD5 +#define SSL_TXT_KRB5_RC4_128_MD5 SSL3_TXT_KRB5_RC4_128_MD5 +#define SSL_TXT_KRB5_IDEA_128_CBC_MD5 SSL3_TXT_KRB5_IDEA_128_CBC_MD5 + +#define SSL_TXT_KRB5_DES_40_CBC_SHA SSL3_TXT_KRB5_DES_40_CBC_SHA +#define SSL_TXT_KRB5_RC2_40_CBC_SHA SSL3_TXT_KRB5_RC2_40_CBC_SHA +#define SSL_TXT_KRB5_RC4_40_SHA SSL3_TXT_KRB5_RC4_40_SHA +#define SSL_TXT_KRB5_DES_40_CBC_MD5 SSL3_TXT_KRB5_DES_40_CBC_MD5 +#define SSL_TXT_KRB5_RC2_40_CBC_MD5 SSL3_TXT_KRB5_RC2_40_CBC_MD5 +#define SSL_TXT_KRB5_RC4_40_MD5 SSL3_TXT_KRB5_RC4_40_MD5 + +#define SSL_TXT_KRB5_DES_40_CBC_SHA SSL3_TXT_KRB5_DES_40_CBC_SHA +#define SSL_TXT_KRB5_DES_40_CBC_MD5 SSL3_TXT_KRB5_DES_40_CBC_MD5 +#define SSL_TXT_KRB5_DES_64_CBC_SHA SSL3_TXT_KRB5_DES_64_CBC_SHA +#define SSL_TXT_KRB5_DES_64_CBC_MD5 SSL3_TXT_KRB5_DES_64_CBC_MD5 +#define SSL_TXT_KRB5_DES_192_CBC3_SHA SSL3_TXT_KRB5_DES_192_CBC3_SHA +#define SSL_TXT_KRB5_DES_192_CBC3_MD5 SSL3_TXT_KRB5_DES_192_CBC3_MD5 +#define SSL_MAX_KRB5_PRINCIPAL_LENGTH 256 + #define SSL_MAX_SSL_SESSION_ID_LENGTH 32 #define SSL_MAX_SID_CTX_LENGTH 32 @@ -103,6 +253,10 @@ extern "C" { #define SSL_TXT_eNULL "eNULL" #define SSL_TXT_NULL "NULL" +#define SSL_TXT_kKRB5 "kKRB5" +#define SSL_TXT_aKRB5 "aKRB5" +#define SSL_TXT_KRB5 "KRB5" + #define SSL_TXT_kRSA "kRSA" #define SSL_TXT_kDHr "kDHr" #define SSL_TXT_kDHd "kDHd" @@ -120,6 +274,7 @@ extern "C" { #define SSL_TXT_RC4 "RC4" #define SSL_TXT_RC2 "RC2" #define SSL_TXT_IDEA "IDEA" +#define SSL_TXT_AES "AES" #define SSL_TXT_MD5 "MD5" #define SSL_TXT_SHA1 "SHA1" #define SSL_TXT_SHA "SHA" @@ -131,29 +286,49 @@ extern "C" { #define SSL_TXT_SSLV3 "SSLv3" #define SSL_TXT_TLSV1 "TLSv1" #define SSL_TXT_ALL "ALL" +#define SSL_TXT_ECC "ECCdraft" /* ECC ciphersuites are not yet official */ + +/* + * COMPLEMENTOF* definitions. These identifiers are used to (de-select) + * ciphers normally not being used. + * Example: "RC4" will activate all ciphers using RC4 including ciphers + * without authentication, which would normally disabled by DEFAULT (due + * the "!ADH" being part of default). Therefore "RC4:!COMPLEMENTOFDEFAULT" + * will make sure that it is also disabled in the specific selection. + * COMPLEMENTOF* identifiers are portable between version, as adjustments + * to the default cipher setup will also be included here. + * + * COMPLEMENTOFDEFAULT does not experience the same special treatment that + * DEFAULT gets, as only selection is being done and no sorting as needed + * for DEFAULT. + */ +#define SSL_TXT_CMPALL "COMPLEMENTOFALL" +#define SSL_TXT_CMPDEF "COMPLEMENTOFDEFAULT" -/* 'DEFAULT' at the start of the cipher list insert the following string - * in addition to this being the default cipher string */ -#ifndef NO_RSA -#define SSL_DEFAULT_CIPHER_LIST "ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH" -#else -#define SSL_ALLOW_ADH -#define SSL_DEFAULT_CIPHER_LIST "ALL:ADH+3DES:ADH+RC4:ADH+DES:@STRENGTH" -#endif +/* The following cipher list is used by default. + * It also is substituted when an application-defined cipher list string + * starts with 'DEFAULT'. */ +#define SSL_DEFAULT_CIPHER_LIST "ALL:!ADH:+RC4:@STRENGTH" /* low priority for RC4 */ /* Used in SSL_set_shutdown()/SSL_get_shutdown(); */ #define SSL_SENT_SHUTDOWN 1 #define SSL_RECEIVED_SHUTDOWN 2 +#ifdef __cplusplus +} +#endif + #include #include #include -#include #include -#include -#if (defined(NO_RSA) || defined(NO_MD5)) && !defined(NO_SSL2) -#define NO_SSL2 +#ifdef __cplusplus +extern "C" { +#endif + +#if (defined(OPENSSL_NO_RSA) || defined(OPENSSL_NO_MD5)) && !defined(OPENSSL_NO_SSL2) +#define OPENSSL_NO_SSL2 #endif #define SSL_FILETYPE_ASN1 X509_FILETYPE_ASN1 @@ -194,13 +369,13 @@ typedef struct ssl_method_st int (*ssl_accept)(SSL *s); int (*ssl_connect)(SSL *s); int (*ssl_read)(SSL *s,void *buf,int len); - int (*ssl_peek)(SSL *s,char *buf,int len); + int (*ssl_peek)(SSL *s,void *buf,int len); int (*ssl_write)(SSL *s,const void *buf,int len); int (*ssl_shutdown)(SSL *s); int (*ssl_renegotiate)(SSL *s); int (*ssl_renegotiate_check)(SSL *s); - long (*ssl_ctrl)(SSL *s,int cmd,long larg,char *parg); - long (*ssl_ctx_ctrl)(SSL_CTX *ctx,int cmd,long larg,char *parg); + long (*ssl_ctrl)(SSL *s,int cmd,long larg,void *parg); + long (*ssl_ctx_ctrl)(SSL_CTX *ctx,int cmd,long larg,void *parg); SSL_CIPHER *(*get_cipher_by_char)(const unsigned char *ptr); int (*put_cipher_by_char)(const SSL_CIPHER *cipher,unsigned char *ptr); int (*ssl_pending)(SSL *s); @@ -210,6 +385,8 @@ typedef struct ssl_method_st long (*get_timeout)(void); struct ssl3_enc_method *ssl3_enc; /* Extra SSLv3/TLS stuff */ int (*ssl_version)(); + long (*ssl_callback_ctrl)(SSL *s, int cb_id, void (*fp)()); + long (*ssl_ctx_callback_ctrl)(SSL_CTX *s, int cb_id, void (*fp)()); } SSL_METHOD; /* Lets make this into an ASN.1 type structure as follows @@ -219,6 +396,7 @@ typedef struct ssl_method_st * Cipher OCTET_STRING, -- the 3 byte cipher ID * Session_ID OCTET_STRING, -- the Session ID * Master_key OCTET_STRING, -- the master key + * KRB5_principal OCTET_STRING -- optional Kerberos principal * Key_Arg [ 0 ] IMPLICIT OCTET_STRING, -- the optional Key argument * Time [ 1 ] EXPLICIT INTEGER, -- optional Start Time * Timeout [ 2 ] EXPLICIT INTEGER, -- optional Timeout ins seconds @@ -249,6 +427,11 @@ typedef struct ssl_session_st unsigned int sid_ctx_length; unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH]; +#ifndef OPENSSL_NO_KRB5 + unsigned int krb5_client_princ_len; + unsigned char krb5_client_princ[SSL_MAX_KRB5_PRINCIPAL_LENGTH]; +#endif /* OPENSSL_NO_KRB5 */ + int not_resumable; /* The cert is the certificate used to establish this connection */ @@ -283,6 +466,7 @@ typedef struct ssl_session_st struct ssl_session_st *prev,*next; } SSL_SESSION; + #define SSL_OP_MICROSOFT_SESS_ID_BUG 0x00000001L #define SSL_OP_NETSCAPE_CHALLENGE_BUG 0x00000002L #define SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG 0x00000008L @@ -292,26 +476,47 @@ typedef struct ssl_session_st #define SSL_OP_SSLEAY_080_CLIENT_DH_BUG 0x00000080L #define SSL_OP_TLS_D5_BUG 0x00000100L #define SSL_OP_TLS_BLOCK_PADDING_BUG 0x00000200L -#define SSL_OP_TLS_ROLLBACK_BUG 0x00000400L +/* Disable SSL 3.0/TLS 1.0 CBC vulnerability workaround that was added + * in OpenSSL 0.9.6d. Usually (depending on the application protocol) + * the workaround is not needed. Unfortunately some broken SSL/TLS + * implementations cannot handle it at all, which is why we include + * it in SSL_OP_ALL. */ +#define SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS 0x00000800L /* added in 0.9.6e */ + +/* SSL_OP_ALL: various bug workarounds that should be rather harmless. + * This used to be 0x000FFFFFL before 0.9.7. */ +#define SSL_OP_ALL 0x00000FFFL + +/* As server, disallow session resumption on renegotiation */ +#define SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION 0x00010000L +/* If set, always create a new key when using tmp_ecdh parameters */ +#define SSL_OP_SINGLE_ECDH_USE 0x00080000L /* If set, always create a new key when using tmp_dh parameters */ #define SSL_OP_SINGLE_DH_USE 0x00100000L -/* Set to also use the tmp_rsa key when doing RSA operations. */ +/* Set to always use the tmp_rsa key when doing RSA operations, + * even when this violates protocol specs */ #define SSL_OP_EPHEMERAL_RSA 0x00200000L +/* Set on servers to choose the cipher according to the server's + * preferences */ +#define SSL_OP_CIPHER_SERVER_PREFERENCE 0x00400000L +/* If set, a server will allow a client to issue a SSLv3.0 version number + * as latest version supported in the premaster secret, even when TLSv1.0 + * (version 3.1) was announced in the client hello. Normally this is + * forbidden to prevent version rollback attacks. */ +#define SSL_OP_TLS_ROLLBACK_BUG 0x00800000L + +#define SSL_OP_NO_SSLv2 0x01000000L +#define SSL_OP_NO_SSLv3 0x02000000L +#define SSL_OP_NO_TLSv1 0x04000000L /* The next flag deliberately changes the ciphertest, this is a check * for the PKCS#1 attack */ #define SSL_OP_PKCS1_CHECK_1 0x08000000L #define SSL_OP_PKCS1_CHECK_2 0x10000000L #define SSL_OP_NETSCAPE_CA_DN_BUG 0x20000000L -/* SSL_OP_NON_EXPORT_FIRST looks utterly broken .. */ -#define SSL_OP_NON_EXPORT_FIRST 0x40000000L -#define SSL_OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG 0x80000000L -#define SSL_OP_ALL 0x000FFFFFL +#define SSL_OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG 0x40000000L -#define SSL_OP_NO_SSLv2 0x01000000L -#define SSL_OP_NO_SSLv3 0x02000000L -#define SSL_OP_NO_TLSv1 0x04000000L /* Allow SSL_write(..., n) to return r with 0 < r < n (i.e. report success * when just a single record has been written): */ @@ -321,48 +526,82 @@ typedef struct ssl_session_st * the misconception that non-blocking SSL_write() behaves like * non-blocking write(): */ #define SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER 0x00000002L +/* Never bother the application with retries if the transport + * is blocking: */ +#define SSL_MODE_AUTO_RETRY 0x00000004L +/* Don't attempt to automatically build certificate chain */ +#define SSL_MODE_NO_AUTO_CHAIN 0x00000008L + /* Note: SSL[_CTX]_set_{options,mode} use |= op on the previous value, * they cannot be used to clear bits. */ #define SSL_CTX_set_options(ctx,op) \ - SSL_CTX_ctrl(ctx,SSL_CTRL_OPTIONS,op,NULL) + SSL_CTX_ctrl((ctx),SSL_CTRL_OPTIONS,(op),NULL) #define SSL_CTX_get_options(ctx) \ - SSL_CTX_ctrl(ctx,SSL_CTRL_OPTIONS,0,NULL) + SSL_CTX_ctrl((ctx),SSL_CTRL_OPTIONS,0,NULL) #define SSL_set_options(ssl,op) \ - SSL_ctrl(ssl,SSL_CTRL_OPTIONS,op,NULL) + SSL_ctrl((ssl),SSL_CTRL_OPTIONS,(op),NULL) #define SSL_get_options(ssl) \ - SSL_ctrl(ssl,SSL_CTRL_OPTIONS,0,NULL) + SSL_ctrl((ssl),SSL_CTRL_OPTIONS,0,NULL) #define SSL_CTX_set_mode(ctx,op) \ - SSL_CTX_ctrl(ctx,SSL_CTRL_MODE,op,NULL) + SSL_CTX_ctrl((ctx),SSL_CTRL_MODE,(op),NULL) #define SSL_CTX_get_mode(ctx) \ - SSL_CTX_ctrl(ctx,SSL_CTRL_MODE,0,NULL) + SSL_CTX_ctrl((ctx),SSL_CTRL_MODE,0,NULL) #define SSL_set_mode(ssl,op) \ - SSL_ctrl(ssl,SSL_CTRL_MODE,op,NULL) + SSL_ctrl((ssl),SSL_CTRL_MODE,(op),NULL) #define SSL_get_mode(ssl) \ - SSL_ctrl(ssl,SSL_CTRL_MODE,0,NULL) + SSL_ctrl((ssl),SSL_CTRL_MODE,0,NULL) + + +void SSL_CTX_set_msg_callback(SSL_CTX *ctx, void (*cb)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg)); +void SSL_set_msg_callback(SSL *ssl, void (*cb)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg)); +#define SSL_CTX_set_msg_callback_arg(ctx, arg) SSL_CTX_ctrl((ctx), SSL_CTRL_SET_MSG_CALLBACK_ARG, 0, (arg)) +#define SSL_set_msg_callback_arg(ssl, arg) SSL_ctrl((ssl), SSL_CTRL_SET_MSG_CALLBACK_ARG, 0, (arg)) + + + +#if defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_WIN32) +#define SSL_MAX_CERT_LIST_DEFAULT 1024*30 /* 30k max cert list :-) */ +#else +#define SSL_MAX_CERT_LIST_DEFAULT 1024*100 /* 100k max cert list :-) */ +#endif #define SSL_SESSION_CACHE_MAX_SIZE_DEFAULT (1024*20) +/* This callback type is used inside SSL_CTX, SSL, and in the functions that set + * them. It is used to override the generation of SSL/TLS session IDs in a + * server. Return value should be zero on an error, non-zero to proceed. Also, + * callbacks should themselves check if the id they generate is unique otherwise + * the SSL handshake will fail with an error - callbacks can do this using the + * 'ssl' value they're passed by; + * SSL_has_matching_session_id(ssl, id, *id_len) + * The length value passed in is set at the maximum size the session ID can be. + * In SSLv2 this is 16 bytes, whereas SSLv3/TLSv1 it is 32 bytes. The callback + * can alter this length to be less if desired, but under SSLv2 session IDs are + * supposed to be fixed at 16 bytes so the id will be padded after the callback + * returns in this case. It is also an error for the callback to set the size to + * zero. */ +typedef int (*GEN_SESSION_CB)(const SSL *ssl, unsigned char *id, + unsigned int *id_len); + typedef struct ssl_comp_st -{ - int id; - char *name; -#ifdef HEADER_COMP_H - COMP_METHOD *method; + { + int id; + const char *name; +#ifndef OPENSSL_NO_COMP + COMP_METHOD *method; #else - char *method; + char *method; #endif -} SSL_COMP; + } SSL_COMP; DECLARE_STACK_OF(SSL_COMP) struct ssl_ctx_st { SSL_METHOD *method; - unsigned long options; - unsigned long mode; STACK_OF(SSL_CIPHER) *cipher_list; /* same as above but sorted for lookup */ @@ -394,13 +633,13 @@ struct ssl_ctx_st * SSL_SESSION_free() when it has finished using it. Otherwise, * on 0, it means the callback has finished with it. * If remove_session_cb is not null, it will be called when - * a session-id is removed from the cache. Again, a return - * of 0 mens that SSLeay should not SSL_SESSION_free() since - * the application is doing something with it. */ + * a session-id is removed from the cache. After the call, + * OpenSSL will SSL_SESSION_free() it. */ int (*new_session_cb)(struct ssl_st *ssl,SSL_SESSION *sess); void (*remove_session_cb)(struct ssl_ctx_st *ctx,SSL_SESSION *sess); SSL_SESSION *(*get_session_cb)(struct ssl_st *ssl, unsigned char *data,int len,int *copy); + struct { int sess_connect; /* SSL new conn - started */ @@ -423,37 +662,20 @@ struct ssl_ctx_st int references; -/**/ void (*info_callback)(); - /* if defined, these override the X509_verify_cert() calls */ -/**/ int (*app_verify_callback)(); -/**/ char *app_verify_arg; /* never used; should be void * */ - - /* default values to use in SSL structures */ -/**/ struct cert_st /* CERT */ *cert; -/**/ int read_ahead; -/**/ int verify_mode; -/**/ int verify_depth; -/**/ unsigned int sid_ctx_length; -/**/ unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH]; -/**/ int (*default_verify_callback)(int ok,X509_STORE_CTX *ctx); - - int purpose; /* Purpose setting */ - int trust; /* Trust setting */ + int (*app_verify_callback)(X509_STORE_CTX *, void *); + void *app_verify_arg; + /* before OpenSSL 0.9.7, 'app_verify_arg' was ignored + * ('app_verify_callback' was called with just one argument) */ /* Default password callback. */ -/**/ pem_password_cb *default_passwd_callback; + pem_password_cb *default_passwd_callback; /* Default password callback user data. */ -/**/ void *default_passwd_callback_userdata; + void *default_passwd_callback_userdata; /* get client cert callback */ -/**/ int (*client_cert_cb)(/* SSL *ssl, X509 **x509, EVP_PKEY **pkey */); - - /* what we put in client cert requests */ - STACK_OF(X509_NAME) *client_CA; - -/**/ int quiet_shutdown; + int (*client_cert_cb)(SSL *ssl, X509 **x509, EVP_PKEY **pkey); CRYPTO_EX_DATA ex_data; @@ -462,7 +684,43 @@ struct ssl_ctx_st const EVP_MD *sha1; /* For SSLv3/TLSv1 'ssl3->sha1' */ STACK_OF(X509) *extra_certs; - STACK_OF(SSL_COMP) *comp_methods; /* stack of SSL_COMP, SSLv3/TLSv1 */ + STACK_OF(SSL_COMP) *comp_methods; /* stack of SSL_COMP, SSLv3/TLSv1 */ + + + /* Default values used when no per-SSL value is defined follow */ + + void (*info_callback)(const SSL *ssl,int type,int val); /* used if SSL's info_callback is NULL */ + + /* what we put in client cert requests */ + STACK_OF(X509_NAME) *client_CA; + + + /* Default values to use in SSL structures follow (these are copied by SSL_new) */ + + unsigned long options; + unsigned long mode; + long max_cert_list; + + struct cert_st /* CERT */ *cert; + int read_ahead; + + /* callback that allows applications to peek at protocol messages */ + void (*msg_callback)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg); + void *msg_callback_arg; + + int verify_mode; + int verify_depth; + unsigned int sid_ctx_length; + unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH]; + int (*default_verify_callback)(int ok,X509_STORE_CTX *ctx); /* called 'verify_callback' in the SSL */ + + /* Default generate session ID callback. */ + GEN_SESSION_CB generate_session_id; + + int purpose; /* Purpose setting */ + int trust; /* Trust setting */ + + int quiet_shutdown; }; #define SSL_SESS_CACHE_OFF 0x0000 @@ -470,11 +728,13 @@ struct ssl_ctx_st #define SSL_SESS_CACHE_SERVER 0x0002 #define SSL_SESS_CACHE_BOTH (SSL_SESS_CACHE_CLIENT|SSL_SESS_CACHE_SERVER) #define SSL_SESS_CACHE_NO_AUTO_CLEAR 0x0080 -/* This one, when set, makes the server session-id lookup not look - * in the cache. If there is an application get_session callback - * defined, this will still get called. */ +/* enough comments already ... see SSL_CTX_set_session_cache_mode(3) */ #define SSL_SESS_CACHE_NO_INTERNAL_LOOKUP 0x0100 +#define SSL_SESS_CACHE_NO_INTERNAL_STORE 0x0200 +#define SSL_SESS_CACHE_NO_INTERNAL \ + (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP|SSL_SESS_CACHE_NO_INTERNAL_STORE) + struct lhash_st *SSL_CTX_sessions(SSL_CTX *ctx); #define SSL_CTX_sess_number(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_NUMBER,0,NULL) #define SSL_CTX_sess_connect(ctx) \ @@ -536,10 +796,10 @@ struct ssl_st * same. This is so data can be read and written to different * handlers */ -#ifdef HEADER_BIO_H +#ifndef OPENSSL_NO_BIO BIO *rbio; /* used by SSL_read */ BIO *wbio; /* used by SSL_write */ - BIO *bbio; /* used during session-id reuse to concatinate + BIO *bbio; /* used during session-id reuse to concatenate * messages */ #else char *rbio; /* used by SSL_read */ @@ -566,7 +826,12 @@ struct ssl_st int server; /* are we the server side? - mostly used by SSL_clear*/ - int new_session;/* 1 if we are to use a new session */ + int new_session;/* 1 if we are to use a new session. + * 2 if we are a server and are inside a handshake + * (i.e. not just sending a HelloRequest) + * NB: For servers, the 'new' session may actually be a previously + * cached session or even the previous session unless + * SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION is set */ int quiet_shutdown;/* don't send shutdown packets */ int shutdown; /* we have shut things down, 0x01 sent, 0x02 * for received */ @@ -574,6 +839,7 @@ struct ssl_st int rstate; /* where we are when reading */ BUF_MEM *init_buf; /* buffer used during init */ + void *init_msg; /* pointer to handshake message body, set by ssl3_get_message() */ int init_num; /* amount read/written */ int init_off; /* amount read/written */ @@ -581,11 +847,16 @@ struct ssl_st unsigned char *packet; unsigned int packet_length; - struct ssl2_ctx_st *s2; /* SSLv2 variables */ - struct ssl3_ctx_st *s3; /* SSLv3 variables */ + struct ssl2_state_st *s2; /* SSLv2 variables */ + struct ssl3_state_st *s3; /* SSLv3 variables */ int read_ahead; /* Read as many input bytes as possible * (for non-blocking reads) */ + + /* callback that allows applications to peek at protocol messages */ + void (*msg_callback)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg); + void *msg_callback_arg; + int hit; /* reusing a previous session */ int purpose; /* Purpose setting */ @@ -600,7 +871,7 @@ struct ssl_st EVP_CIPHER_CTX *enc_read_ctx; /* cryptographic state */ const EVP_MD *read_hash; /* used for mac generation */ -#ifdef HEADER_COMP_H +#ifndef OPENSSL_NO_COMP COMP_CTX *expand; /* uncompress */ #else char *expand; @@ -608,7 +879,7 @@ struct ssl_st EVP_CIPHER_CTX *enc_write_ctx; /* cryptographic state */ const EVP_MD *write_hash; /* used for mac generation */ -#ifdef HEADER_COMP_H +#ifndef OPENSSL_NO_COMP COMP_CTX *compress; /* compression */ #else char *compress; @@ -628,16 +899,24 @@ struct ssl_st /* This can also be in the session once a session is established */ SSL_SESSION *session; + /* Default generate session ID callback. */ + GEN_SESSION_CB generate_session_id; + /* Used in SSL2 and SSL3 */ int verify_mode; /* 0 don't care about verify failure. * 1 fail if verify fails */ int verify_depth; int (*verify_callback)(int ok,X509_STORE_CTX *ctx); /* fail if callback returns 0 */ - void (*info_callback)(); /* optional informational callback */ + + void (*info_callback)(const SSL *ssl,int type,int val); /* optional informational callback */ int error; /* error bytes to be written */ int error_code; /* actual code */ +#ifndef OPENSSL_NO_KRB5 + KSSL_CTX *kssl_ctx; /* Kerberos 5 context */ +#endif /* OPENSSL_NO_KRB5 */ + SSL_CTX *ctx; /* set this flag to 1 and a sleep(1) is put into all SSL_read() * and SSL_write() calls, good for nbio debuging :-) */ @@ -653,16 +932,25 @@ struct ssl_st int references; unsigned long options; /* protocol behaviour */ unsigned long mode; /* API behaviour */ + long max_cert_list; int first_packet; int client_version; /* what was passed, used for * SSLv3/TLS rollback check */ }; +#ifdef __cplusplus +} +#endif + #include #include #include /* This is mostly sslv3 with a few tweaks */ #include +#ifdef __cplusplus +extern "C" { +#endif + /* compatibility */ #define SSL_set_app_data(s,arg) (SSL_set_ex_data(s,0,(char *)arg)) #define SSL_get_app_data(s) (SSL_get_ex_data(s,0)) @@ -806,20 +1094,26 @@ size_t SSL_get_peer_finished(SSL *s, void *buf, size_t count); #define SSL_ERROR_SYSCALL 5 /* look at error stack/return value/errno */ #define SSL_ERROR_ZERO_RETURN 6 #define SSL_ERROR_WANT_CONNECT 7 +#define SSL_ERROR_WANT_ACCEPT 8 #define SSL_CTRL_NEED_TMP_RSA 1 #define SSL_CTRL_SET_TMP_RSA 2 #define SSL_CTRL_SET_TMP_DH 3 -#define SSL_CTRL_SET_TMP_RSA_CB 4 -#define SSL_CTRL_SET_TMP_DH_CB 5 -/* Add these ones */ -#define SSL_CTRL_GET_SESSION_REUSED 6 -#define SSL_CTRL_GET_CLIENT_CERT_REQUEST 7 -#define SSL_CTRL_GET_NUM_RENEGOTIATIONS 8 -#define SSL_CTRL_CLEAR_NUM_RENEGOTIATIONS 9 -#define SSL_CTRL_GET_TOTAL_RENEGOTIATIONS 10 -#define SSL_CTRL_GET_FLAGS 11 -#define SSL_CTRL_EXTRA_CHAIN_CERT 12 +#define SSL_CTRL_SET_TMP_ECDH 4 +#define SSL_CTRL_SET_TMP_RSA_CB 5 +#define SSL_CTRL_SET_TMP_DH_CB 6 +#define SSL_CTRL_SET_TMP_ECDH_CB 7 + +#define SSL_CTRL_GET_SESSION_REUSED 8 +#define SSL_CTRL_GET_CLIENT_CERT_REQUEST 9 +#define SSL_CTRL_GET_NUM_RENEGOTIATIONS 10 +#define SSL_CTRL_CLEAR_NUM_RENEGOTIATIONS 11 +#define SSL_CTRL_GET_TOTAL_RENEGOTIATIONS 12 +#define SSL_CTRL_GET_FLAGS 13 +#define SSL_CTRL_EXTRA_CHAIN_CERT 14 + +#define SSL_CTRL_SET_MSG_CALLBACK 15 +#define SSL_CTRL_SET_MSG_CALLBACK_ARG 16 /* Stats */ #define SSL_CTRL_SESS_NUMBER 20 @@ -835,7 +1129,7 @@ size_t SSL_get_peer_finished(SSL *s, void *buf, size_t count); #define SSL_CTRL_SESS_TIMEOUTS 30 #define SSL_CTRL_SESS_CACHE_FULL 31 #define SSL_CTRL_OPTIONS 32 -#define SSL_CTRL_MODE 33 +#define SSL_CTRL_MODE 33 #define SSL_CTRL_GET_READ_AHEAD 40 #define SSL_CTRL_SET_READ_AHEAD 41 @@ -844,6 +1138,9 @@ size_t SSL_get_peer_finished(SSL *s, void *buf, size_t count); #define SSL_CTRL_SET_SESS_CACHE_MODE 44 #define SSL_CTRL_GET_SESS_CACHE_MODE 45 +#define SSL_CTRL_GET_MAX_CERT_LIST 50 +#define SSL_CTRL_SET_MAX_CERT_LIST 51 + #define SSL_session_reused(ssl) \ SSL_ctrl((ssl),SSL_CTRL_GET_SESSION_REUSED,0,NULL) #define SSL_num_renegotiations(ssl) \ @@ -859,6 +1156,8 @@ size_t SSL_get_peer_finished(SSL *s, void *buf, size_t count); SSL_CTX_ctrl(ctx,SSL_CTRL_SET_TMP_RSA,0,(char *)rsa) #define SSL_CTX_set_tmp_dh(ctx,dh) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_TMP_DH,0,(char *)dh) +#define SSL_CTX_set_tmp_ecdh(ctx,ecdh) \ + SSL_CTX_ctrl(ctx,SSL_CTRL_SET_TMP_ECDH,0,(char *)ecdh) #define SSL_need_tmp_RSA(ssl) \ SSL_ctrl(ssl,SSL_CTRL_NEED_TMP_RSA,0,NULL) @@ -866,27 +1165,13 @@ size_t SSL_get_peer_finished(SSL *s, void *buf, size_t count); SSL_ctrl(ssl,SSL_CTRL_SET_TMP_RSA,0,(char *)rsa) #define SSL_set_tmp_dh(ssl,dh) \ SSL_ctrl(ssl,SSL_CTRL_SET_TMP_DH,0,(char *)dh) +#define SSL_set_tmp_ecdh(ssl,ecdh) \ + SSL_ctrl(ssl,SSL_CTRL_SET_TMP_ECDH,0,(char *)ecdh) #define SSL_CTX_add_extra_chain_cert(ctx,x509) \ SSL_CTX_ctrl(ctx,SSL_CTRL_EXTRA_CHAIN_CERT,0,(char *)x509) -/* VMS uses only 31 characters for symbols. */ -#ifdef VMS -#undef SSL_CTX_set_cert_verify_callback -#define SSL_CTX_set_cert_verify_callback SSL_CTX_set_cert_verify_cb -#undef SSL_CTX_use_certificate_chain_file -#define SSL_CTX_use_certificate_chain_file SSL_CTX_use_cert_chain_file -#undef SSL_CTX_set_default_verify_paths -#define SSL_CTX_set_default_verify_paths SSL_CTX_set_def_verify_paths -#undef SSL_get_ex_data_X509_STORE_CTX_idx -#define SSL_get_ex_data_X509_STORE_CTX_idx SSL_get_ex_data_X509_STOR_CTX_i -#undef SSL_add_file_cert_subjects_to_stack -#define SSL_add_file_cert_subjects_to_stack SSL_add_file_cert_sub_to_stack -#undef SSL_add_dir_cert_subjects_to_stack -#define SSL_add_dir_cert_subjects_to_stack SSL_add_dir_cert_sub_to_stack -#endif - -#ifdef HEADER_BIO_H +#ifndef OPENSSL_NO_BIO BIO_METHOD *BIO_f_ssl(void); BIO *BIO_new_ssl(SSL_CTX *ctx,int client); BIO *BIO_new_ssl_connect(SSL_CTX *ctx); @@ -913,17 +1198,24 @@ int SSL_CIPHER_get_bits(SSL_CIPHER *c,int *alg_bits); char * SSL_CIPHER_get_version(SSL_CIPHER *c); const char * SSL_CIPHER_get_name(SSL_CIPHER *c); +const COMP_METHOD *SSL_get_current_compression(SSL *s); +const COMP_METHOD *SSL_get_current_expansion(SSL *s); +const char *SSL_COMP_get_name(const COMP_METHOD *comp); +STACK_OF(SSL_COMP) *SSL_COMP_get_compression_methods(void); + int SSL_get_fd(SSL *s); +int SSL_get_rfd(SSL *s); +int SSL_get_wfd(SSL *s); const char * SSL_get_cipher_list(SSL *s,int n); char * SSL_get_shared_ciphers(SSL *s, char *buf, int len); int SSL_get_read_ahead(SSL * s); int SSL_pending(SSL *s); -#ifndef NO_SOCK +#ifndef OPENSSL_NO_SOCK int SSL_set_fd(SSL *s, int fd); int SSL_set_rfd(SSL *s, int fd); int SSL_set_wfd(SSL *s, int fd); #endif -#ifdef HEADER_BIO_H +#ifndef OPENSSL_NO_BIO void SSL_set_bio(SSL *s, BIO *rbio,BIO *wbio); BIO * SSL_get_rbio(SSL *s); BIO * SSL_get_wbio(SSL *s); @@ -936,7 +1228,7 @@ int (*SSL_get_verify_callback(SSL *s))(int,X509_STORE_CTX *); void SSL_set_verify(SSL *s, int mode, int (*callback)(int ok,X509_STORE_CTX *ctx)); void SSL_set_verify_depth(SSL *s, int depth); -#ifndef NO_RSA +#ifndef OPENSSL_NO_RSA int SSL_use_RSAPrivateKey(SSL *ssl, RSA *rsa); #endif int SSL_use_RSAPrivateKey_ASN1(SSL *ssl, unsigned char *d, long len); @@ -945,7 +1237,7 @@ int SSL_use_PrivateKey_ASN1(int pk,SSL *ssl, unsigned char *d, long len); int SSL_use_certificate(SSL *ssl, X509 *x); int SSL_use_certificate_ASN1(SSL *ssl, unsigned char *d, int len); -#ifndef NO_STDIO +#ifndef OPENSSL_NO_STDIO int SSL_use_RSAPrivateKey_file(SSL *ssl, const char *file, int type); int SSL_use_PrivateKey_file(SSL *ssl, const char *file, int type); int SSL_use_certificate_file(SSL *ssl, const char *file, int type); @@ -956,16 +1248,20 @@ int SSL_CTX_use_certificate_chain_file(SSL_CTX *ctx, const char *file); /* PEM t STACK_OF(X509_NAME) *SSL_load_client_CA_file(const char *file); int SSL_add_file_cert_subjects_to_stack(STACK_OF(X509_NAME) *stackCAs, const char *file); +#ifndef OPENSSL_SYS_VMS +#ifndef OPENSSL_SYS_MACINTOSH_CLASSIC /* XXXXX: Better scheme needed! [was: #ifndef MAC_OS_pre_X] */ int SSL_add_dir_cert_subjects_to_stack(STACK_OF(X509_NAME) *stackCAs, const char *dir); #endif +#endif + +#endif -void ERR_load_SSL_strings(void ); void SSL_load_error_strings(void ); -char * SSL_state_string(SSL *s); -char * SSL_rstate_string(SSL *s); -char * SSL_state_string_long(SSL *s); -char * SSL_rstate_string_long(SSL *s); +const char *SSL_state_string(const SSL *s); +const char *SSL_rstate_string(const SSL *s); +const char *SSL_state_string_long(const SSL *s); +const char *SSL_rstate_string_long(const SSL *s); long SSL_SESSION_get_time(SSL_SESSION *s); long SSL_SESSION_set_time(SSL_SESSION *s, long t); long SSL_SESSION_get_timeout(SSL_SESSION *s); @@ -975,10 +1271,11 @@ void SSL_copy_session_id(SSL *to,SSL *from); SSL_SESSION *SSL_SESSION_new(void); unsigned long SSL_SESSION_hash(SSL_SESSION *a); int SSL_SESSION_cmp(SSL_SESSION *a,SSL_SESSION *b); -#ifndef NO_FP_API +const unsigned char *SSL_SESSION_get_id(const SSL_SESSION *s, unsigned int *len); +#ifndef OPENSSL_NO_FP_API int SSL_SESSION_print_fp(FILE *fp,SSL_SESSION *ses); #endif -#ifdef HEADER_BIO_H +#ifndef OPENSSL_NO_BIO int SSL_SESSION_print(BIO *fp,SSL_SESSION *ses); #endif void SSL_SESSION_free(SSL_SESSION *ses); @@ -986,6 +1283,10 @@ int i2d_SSL_SESSION(SSL_SESSION *in,unsigned char **pp); int SSL_set_session(SSL *to, SSL_SESSION *session); int SSL_CTX_add_session(SSL_CTX *s, SSL_SESSION *c); int SSL_CTX_remove_session(SSL_CTX *,SSL_SESSION *c); +int SSL_CTX_set_generate_session_id(SSL_CTX *, GEN_SESSION_CB); +int SSL_set_generate_session_id(SSL *, GEN_SESSION_CB); +int SSL_has_matching_session_id(const SSL *ssl, const unsigned char *id, + unsigned int id_len); SSL_SESSION *d2i_SSL_SESSION(SSL_SESSION **a,unsigned char **pp,long length); #ifdef HEADER_X509_H @@ -994,18 +1295,14 @@ X509 * SSL_get_peer_certificate(SSL *s); STACK_OF(X509) *SSL_get_peer_cert_chain(SSL *s); -#ifdef VMS -#define SSL_CTX_set_default_passwd_cb_userdata SSL_CTX_set_def_passwd_cb_ud -#endif - int SSL_CTX_get_verify_mode(SSL_CTX *ctx); int SSL_CTX_get_verify_depth(SSL_CTX *ctx); int (*SSL_CTX_get_verify_callback(SSL_CTX *ctx))(int,X509_STORE_CTX *); void SSL_CTX_set_verify(SSL_CTX *ctx,int mode, int (*callback)(int, X509_STORE_CTX *)); void SSL_CTX_set_verify_depth(SSL_CTX *ctx,int depth); -void SSL_CTX_set_cert_verify_callback(SSL_CTX *ctx, int (*cb)(),char *arg); -#ifndef NO_RSA +void SSL_CTX_set_cert_verify_callback(SSL_CTX *ctx, int (*cb)(X509_STORE_CTX *,void *), void *arg); +#ifndef OPENSSL_NO_RSA int SSL_CTX_use_RSAPrivateKey(SSL_CTX *ctx, RSA *rsa); #endif int SSL_CTX_use_RSAPrivateKey_ASN1(SSL_CTX *ctx, unsigned char *d, long len); @@ -1036,11 +1333,13 @@ int SSL_set_trust(SSL *s, int trust); void SSL_free(SSL *ssl); int SSL_accept(SSL *ssl); int SSL_connect(SSL *ssl); -int SSL_read(SSL *ssl,char *buf,int num); -int SSL_peek(SSL *ssl,char *buf,int num); -int SSL_write(SSL *ssl,const char *buf,int num); -long SSL_ctrl(SSL *ssl,int cmd, long larg, char *parg); -long SSL_CTX_ctrl(SSL_CTX *ctx,int cmd, long larg, char *parg); +int SSL_read(SSL *ssl,void *buf,int num); +int SSL_peek(SSL *ssl,void *buf,int num); +int SSL_write(SSL *ssl,const void *buf,int num); +long SSL_ctrl(SSL *ssl,int cmd, long larg, void *parg); +long SSL_callback_ctrl(SSL *, int, void (*)()); +long SSL_CTX_ctrl(SSL_CTX *ctx,int cmd, long larg, void *parg); +long SSL_CTX_callback_ctrl(SSL_CTX *, int, void (*)()); int SSL_get_error(SSL *s,int ret_code); const char *SSL_get_version(SSL *s); @@ -1068,14 +1367,15 @@ STACK_OF(SSL_CIPHER) *SSL_get_ciphers(SSL *s); int SSL_do_handshake(SSL *s); int SSL_renegotiate(SSL *s); +int SSL_renegotiate_pending(SSL *s); int SSL_shutdown(SSL *s); SSL_METHOD *SSL_get_ssl_method(SSL *s); int SSL_set_ssl_method(SSL *s,SSL_METHOD *method); -char *SSL_alert_type_string_long(int value); -char *SSL_alert_type_string(int value); -char *SSL_alert_desc_string_long(int value); -char *SSL_alert_desc_string(int value); +const char *SSL_alert_type_string_long(int value); +const char *SSL_alert_type_string(int value); +const char *SSL_alert_desc_string_long(int value); +const char *SSL_alert_desc_string(int value); void SSL_set_client_CA_list(SSL *s, STACK_OF(X509_NAME) *list); void SSL_CTX_set_client_CA_list(SSL_CTX *ctx, STACK_OF(X509_NAME) *list); @@ -1113,8 +1413,9 @@ int SSL_CTX_load_verify_locations(SSL_CTX *ctx, const char *CAfile, SSL_SESSION *SSL_get_session(SSL *ssl); SSL_SESSION *SSL_get1_session(SSL *ssl); /* obtain a reference count */ SSL_CTX *SSL_get_SSL_CTX(SSL *ssl); -void SSL_set_info_callback(SSL *ssl,void (*cb)()); -void (*SSL_get_info_callback(SSL *ssl))(); +void SSL_set_info_callback(SSL *ssl, + void (*cb)(const SSL *ssl,int type,int val)); +void (*SSL_get_info_callback(SSL *ssl))(const SSL *ssl,int type,int val); int SSL_state(SSL *ssl); void SSL_set_verify_result(SSL *ssl,long v); @@ -1151,10 +1452,18 @@ int SSL_get_ex_data_X509_STORE_CTX_idx(void ); #define SSL_CTX_get_read_ahead(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_GET_READ_AHEAD,0,NULL) #define SSL_CTX_set_read_ahead(ctx,m) \ - SSL_CTX_ctrl(ctx,SSL_CTRL_SET_READ_AHEAD,0,NULL) + SSL_CTX_ctrl(ctx,SSL_CTRL_SET_READ_AHEAD,m,NULL) +#define SSL_CTX_get_max_cert_list(ctx) \ + SSL_CTX_ctrl(ctx,SSL_CTRL_GET_MAX_CERT_LIST,0,NULL) +#define SSL_CTX_set_max_cert_list(ctx,m) \ + SSL_CTX_ctrl(ctx,SSL_CTRL_SET_MAX_CERT_LIST,m,NULL) +#define SSL_get_max_cert_list(ssl) \ + SSL_ctrl(ssl,SSL_CTRL_GET_MAX_CERT_LIST,0,NULL) +#define SSL_set_max_cert_list(ssl,m) \ + SSL_ctrl(ssl,SSL_CTRL_SET_MAX_CERT_LIST,m,NULL) /* NB: the keylength is only applicable when is_export is true */ -#ifndef NO_RSA +#ifndef OPENSSL_NO_RSA void SSL_CTX_set_tmp_rsa_callback(SSL_CTX *ctx, RSA *(*cb)(SSL *ssl,int is_export, int keylength)); @@ -1163,7 +1472,7 @@ void SSL_set_tmp_rsa_callback(SSL *ssl, RSA *(*cb)(SSL *ssl,int is_export, int keylength)); #endif -#ifndef NO_DH +#ifndef OPENSSL_NO_DH void SSL_CTX_set_tmp_dh_callback(SSL_CTX *ctx, DH *(*dh)(SSL *ssl,int is_export, int keylength)); @@ -1171,10 +1480,20 @@ void SSL_set_tmp_dh_callback(SSL *ssl, DH *(*dh)(SSL *ssl,int is_export, int keylength)); #endif +#ifndef OPENSSL_NO_ECDH +void SSL_CTX_set_tmp_ecdh_callback(SSL_CTX *ctx, + EC_KEY *(*ecdh)(SSL *ssl,int is_export, + int keylength)); +void SSL_set_tmp_ecdh_callback(SSL *ssl, + EC_KEY *(*ecdh)(SSL *ssl,int is_export, + int keylength)); +#endif -#ifdef HEADER_COMP_H +#ifndef OPENSSL_NO_COMP +STACK_OF(SSL_COMP) *SSL_COMP_get_compression_method(void); int SSL_COMP_add_compression_method(int id,COMP_METHOD *cm); #else +void *SSL_COMP_get_compression_method(void); int SSL_COMP_add_compression_method(int id,char *cm); #endif @@ -1182,11 +1501,13 @@ int SSL_COMP_add_compression_method(int id,char *cm); /* The following lines are auto generated by the script mkerr.pl. Any changes * made after this point may be overwritten when the script is next run. */ +void ERR_load_SSL_strings(void); /* Error codes for the SSL functions. */ /* Function codes. */ #define SSL_F_CLIENT_CERTIFICATE 100 +#define SSL_F_CLIENT_FINISHED 238 #define SSL_F_CLIENT_HELLO 101 #define SSL_F_CLIENT_MASTER_KEY 102 #define SSL_F_D2I_SSL_SESSION 103 @@ -1200,21 +1521,28 @@ int SSL_COMP_add_compression_method(int id,char *cm); #define SSL_F_I2D_SSL_SESSION 111 #define SSL_F_READ_N 112 #define SSL_F_REQUEST_CERTIFICATE 113 +#define SSL_F_SERVER_FINISH 239 #define SSL_F_SERVER_HELLO 114 +#define SSL_F_SERVER_VERIFY 240 #define SSL_F_SSL23_ACCEPT 115 #define SSL_F_SSL23_CLIENT_HELLO 116 #define SSL_F_SSL23_CONNECT 117 #define SSL_F_SSL23_GET_CLIENT_HELLO 118 #define SSL_F_SSL23_GET_SERVER_HELLO 119 +#define SSL_F_SSL23_PEEK 237 #define SSL_F_SSL23_READ 120 #define SSL_F_SSL23_WRITE 121 #define SSL_F_SSL2_ACCEPT 122 #define SSL_F_SSL2_CONNECT 123 #define SSL_F_SSL2_ENC_INIT 124 +#define SSL_F_SSL2_GENERATE_KEY_MATERIAL 241 +#define SSL_F_SSL2_PEEK 234 #define SSL_F_SSL2_READ 125 +#define SSL_F_SSL2_READ_INTERNAL 236 #define SSL_F_SSL2_SET_CERTIFICATE 126 #define SSL_F_SSL2_WRITE 127 #define SSL_F_SSL3_ACCEPT 128 +#define SSL_F_SSL3_CALLBACK_CTRL 233 #define SSL_F_SSL3_CHANGE_CIPHER_STATE 129 #define SSL_F_SSL3_CHECK_CERT_AND_ALGORITHM 130 #define SSL_F_SSL3_CLIENT_HELLO 131 @@ -1222,6 +1550,7 @@ int SSL_COMP_add_compression_method(int id,char *cm); #define SSL_F_SSL3_CTRL 213 #define SSL_F_SSL3_CTX_CTRL 133 #define SSL_F_SSL3_ENC 134 +#define SSL_F_SSL3_GENERATE_KEY_BLOCK 238 #define SSL_F_SSL3_GET_CERTIFICATE_REQUEST 135 #define SSL_F_SSL3_GET_CERT_VERIFY 136 #define SSL_F_SSL3_GET_CLIENT_CERTIFICATE 137 @@ -1235,6 +1564,7 @@ int SSL_COMP_add_compression_method(int id,char *cm); #define SSL_F_SSL3_GET_SERVER_DONE 145 #define SSL_F_SSL3_GET_SERVER_HELLO 146 #define SSL_F_SSL3_OUTPUT_CERT_CHAIN 147 +#define SSL_F_SSL3_PEEK 235 #define SSL_F_SSL3_READ_BYTES 148 #define SSL_F_SSL3_READ_N 149 #define SSL_F_SSL3_SEND_CERTIFICATE_REQUEST 150 @@ -1242,6 +1572,7 @@ int SSL_COMP_add_compression_method(int id,char *cm); #define SSL_F_SSL3_SEND_CLIENT_KEY_EXCHANGE 152 #define SSL_F_SSL3_SEND_CLIENT_VERIFY 153 #define SSL_F_SSL3_SEND_SERVER_CERTIFICATE 154 +#define SSL_F_SSL3_SEND_SERVER_HELLO 242 #define SSL_F_SSL3_SEND_SERVER_KEY_EXCHANGE 155 #define SSL_F_SSL3_SETUP_BUFFERS 156 #define SSL_F_SSL3_SETUP_KEY_BLOCK 157 @@ -1261,6 +1592,7 @@ int SSL_COMP_add_compression_method(int id,char *cm); #define SSL_F_SSL_CLEAR 164 #define SSL_F_SSL_COMP_ADD_COMPRESSION_METHOD 165 #define SSL_F_SSL_CREATE_CIPHER_LIST 166 +#define SSL_F_SSL_CTRL 232 #define SSL_F_SSL_CTX_CHECK_PRIVATE_KEY 168 #define SSL_F_SSL_CTX_NEW 169 #define SSL_F_SSL_CTX_SET_PURPOSE 226 @@ -1332,6 +1664,9 @@ int SSL_COMP_add_compression_method(int id,char *cm); #define SSL_R_BAD_DH_P_LENGTH 110 #define SSL_R_BAD_DIGEST_LENGTH 111 #define SSL_R_BAD_DSA_SIGNATURE 112 +#define SSL_R_BAD_ECC_CERT 1117 +#define SSL_R_BAD_ECDSA_SIGNATURE 1112 +#define SSL_R_BAD_ECPOINT 1113 #define SSL_R_BAD_HELLO_REQUEST 105 #define SSL_R_BAD_LENGTH 271 #define SSL_R_BAD_MAC_DECODE 113 @@ -1363,30 +1698,49 @@ int SSL_COMP_add_compression_method(int id,char *cm); #define SSL_R_CIPHER_TABLE_SRC_ERROR 139 #define SSL_R_COMPRESSED_LENGTH_TOO_LONG 140 #define SSL_R_COMPRESSION_FAILURE 141 +#define SSL_R_COMPRESSION_ID_NOT_WITHIN_PRIVATE_RANGE 1120 #define SSL_R_COMPRESSION_LIBRARY_ERROR 142 #define SSL_R_CONNECTION_ID_IS_DIFFERENT 143 #define SSL_R_CONNECTION_TYPE_NOT_SET 144 #define SSL_R_DATA_BETWEEN_CCS_AND_FINISHED 145 #define SSL_R_DATA_LENGTH_TOO_LONG 146 #define SSL_R_DECRYPTION_FAILED 147 +#define SSL_R_DECRYPTION_FAILED_OR_BAD_RECORD_MAC 1109 #define SSL_R_DH_PUBLIC_VALUE_LENGTH_IS_WRONG 148 #define SSL_R_DIGEST_CHECK_FAILED 149 +#define SSL_R_DUPLICATE_COMPRESSION_ID 1121 +#define SSL_R_ECGROUP_TOO_LARGE_FOR_CIPHER 1119 #define SSL_R_ENCRYPTED_LENGTH_TOO_LONG 150 +#define SSL_R_ERROR_GENERATING_TMP_RSA_KEY 1092 #define SSL_R_ERROR_IN_RECEIVED_CIPHER_LIST 151 #define SSL_R_EXCESSIVE_MESSAGE_SIZE 152 #define SSL_R_EXTRA_DATA_IN_MESSAGE 153 #define SSL_R_GOT_A_FIN_BEFORE_A_CCS 154 #define SSL_R_HTTPS_PROXY_REQUEST 155 #define SSL_R_HTTP_REQUEST 156 -#define SSL_R_INTERNAL_ERROR 157 +#define SSL_R_ILLEGAL_PADDING 1110 #define SSL_R_INVALID_CHALLENGE_LENGTH 158 #define SSL_R_INVALID_COMMAND 280 #define SSL_R_INVALID_PURPOSE 278 #define SSL_R_INVALID_TRUST 279 +#define SSL_R_KEY_ARG_TOO_LONG 1112 +#define SSL_R_KRB5 1104 +#define SSL_R_KRB5_C_CC_PRINC 1094 +#define SSL_R_KRB5_C_GET_CRED 1095 +#define SSL_R_KRB5_C_INIT 1096 +#define SSL_R_KRB5_C_MK_REQ 1097 +#define SSL_R_KRB5_S_BAD_TICKET 1098 +#define SSL_R_KRB5_S_INIT 1099 +#define SSL_R_KRB5_S_RD_REQ 1108 +#define SSL_R_KRB5_S_TKT_EXPIRED 1105 +#define SSL_R_KRB5_S_TKT_NYV 1106 +#define SSL_R_KRB5_S_TKT_SKEW 1107 #define SSL_R_LENGTH_MISMATCH 159 #define SSL_R_LENGTH_TOO_SHORT 160 #define SSL_R_LIBRARY_BUG 274 #define SSL_R_LIBRARY_HAS_NO_CIPHERS 161 +#define SSL_R_MASTER_KEY_TOO_LONG 1112 +#define SSL_R_MESSAGE_TOO_LONG 1111 #define SSL_R_MISSING_DH_DSA_CERT 162 #define SSL_R_MISSING_DH_KEY 163 #define SSL_R_MISSING_DH_RSA_CERT 164 @@ -1397,6 +1751,7 @@ int SSL_COMP_add_compression_method(int id,char *cm); #define SSL_R_MISSING_RSA_ENCRYPTING_CERT 169 #define SSL_R_MISSING_RSA_SIGNING_CERT 170 #define SSL_R_MISSING_TMP_DH_KEY 171 +#define SSL_R_MISSING_TMP_ECDH_KEY 1114 #define SSL_R_MISSING_TMP_RSA_KEY 172 #define SSL_R_MISSING_TMP_RSA_PKEY 173 #define SSL_R_MISSING_VERIFY_MESSAGE 174 @@ -1441,6 +1796,7 @@ int SSL_COMP_add_compression_method(int id,char *cm); #define SSL_R_READ_WRONG_PACKET_TYPE 212 #define SSL_R_RECORD_LENGTH_MISMATCH 213 #define SSL_R_RECORD_TOO_LARGE 214 +#define SSL_R_RECORD_TOO_SMALL 1093 #define SSL_R_REQUIRED_CIPHER_MISSING 215 #define SSL_R_REUSE_CERT_LENGTH_NOT_ZERO 216 #define SSL_R_REUSE_CERT_TYPE_NOT_ZERO 217 @@ -1449,6 +1805,8 @@ int SSL_COMP_add_compression_method(int id,char *cm); #define SSL_R_SHORT_READ 219 #define SSL_R_SIGNATURE_FOR_NON_SIGNING_CERTIFICATE 220 #define SSL_R_SSL23_DOING_SESSION_ID_REUSE 221 +#define SSL_R_SSL2_CONNECTION_ID_TOO_LONG 1114 +#define SSL_R_SSL3_SESSION_ID_TOO_LONG 1113 #define SSL_R_SSL3_SESSION_ID_TOO_SHORT 222 #define SSL_R_SSLV3_ALERT_BAD_CERTIFICATE 1042 #define SSL_R_SSLV3_ALERT_BAD_RECORD_MAC 1020 @@ -1469,7 +1827,10 @@ int SSL_COMP_add_compression_method(int id,char *cm); #define SSL_R_SSL_CTX_HAS_NO_DEFAULT_SSL_VERSION 228 #define SSL_R_SSL_HANDSHAKE_FAILURE 229 #define SSL_R_SSL_LIBRARY_HAS_NO_CIPHERS 230 +#define SSL_R_SSL_SESSION_ID_CALLBACK_FAILED 1102 +#define SSL_R_SSL_SESSION_ID_CONFLICT 1103 #define SSL_R_SSL_SESSION_ID_CONTEXT_TOO_LONG 273 +#define SSL_R_SSL_SESSION_ID_HAS_BAD_LENGTH 1101 #define SSL_R_SSL_SESSION_ID_IS_DIFFERENT 231 #define SSL_R_TLSV1_ALERT_ACCESS_DENIED 1049 #define SSL_R_TLSV1_ALERT_DECODE_ERROR 1050 @@ -1488,8 +1849,10 @@ int SSL_COMP_add_compression_method(int id,char *cm); #define SSL_R_TLS_RSA_ENCRYPTED_VALUE_LENGTH_IS_WRONG 234 #define SSL_R_TRIED_TO_USE_UNSUPPORTED_CIPHER 235 #define SSL_R_UNABLE_TO_DECODE_DH_CERTS 236 +#define SSL_R_UNABLE_TO_DECODE_ECDH_CERTS 1115 #define SSL_R_UNABLE_TO_EXTRACT_PUBLIC_KEY 237 #define SSL_R_UNABLE_TO_FIND_DH_PARAMETERS 238 +#define SSL_R_UNABLE_TO_FIND_ECDH_PARAMETERS 1116 #define SSL_R_UNABLE_TO_FIND_PUBLIC_KEY_PARAMETERS 239 #define SSL_R_UNABLE_TO_FIND_SSL_METHOD 240 #define SSL_R_UNABLE_TO_LOAD_SSL2_MD5_ROUTINES 241 @@ -1510,6 +1873,8 @@ int SSL_COMP_add_compression_method(int id,char *cm); #define SSL_R_UNKNOWN_STATE 255 #define SSL_R_UNSUPPORTED_CIPHER 256 #define SSL_R_UNSUPPORTED_COMPRESSION_ALGORITHM 257 +#define SSL_R_UNSUPPORTED_ELLIPTIC_CURVE 1118 +#define SSL_R_UNSUPPORTED_OPTION 1091 #define SSL_R_UNSUPPORTED_PROTOCOL 258 #define SSL_R_UNSUPPORTED_SSL_VERSION 259 #define SSL_R_WRITE_BIO_NOT_SET 260 @@ -1527,4 +1892,3 @@ int SSL_COMP_add_compression_method(int id,char *cm); } #endif #endif -