X-Git-Url: https://git.openssl.org/?p=openssl.git;a=blobdiff_plain;f=config;h=e72b982288c5264e43fbdaafa2fc96f8c9770d5b;hp=db0046f3d6c12a0b6e899f929fc4936f876ae5a0;hb=726c2231431f811d12bdfcd83052eb62d1fc626b;hpb=368101778e34c4142ab4174544cb9427a75bbf0f diff --git a/config b/config index db0046f3d6..e72b982288 100755 --- a/config +++ b/config @@ -74,10 +74,18 @@ if [ "x$XREL" != "x" ]; then echo "whatever-whatever-sco5"; exit 0 ;; 4.2MP) - if [ "x$VERSION" = "x2.1.1" ]; then + if [ "x$VERSION" = "x2.01" ]; then + echo "${MACHINE}-whatever-unixware201"; exit 0 + elif [ "x$VERSION" = "x2.02" ]; then + echo "${MACHINE}-whatever-unixware202"; exit 0 + elif [ "x$VERSION" = "x2.03" ]; then + echo "${MACHINE}-whatever-unixware203"; exit 0 + elif [ "x$VERSION" = "x2.1.1" ]; then echo "${MACHINE}-whatever-unixware211"; exit 0 elif [ "x$VERSION" = "x2.1.2" ]; then echo "${MACHINE}-whatever-unixware212"; exit 0 + elif [ "x$VERSION" = "x2.1.3" ]; then + echo "${MACHINE}-whatever-unixware213"; exit 0 else echo "${MACHINE}-whatever-unixware2"; exit 0 fi @@ -85,6 +93,11 @@ if [ "x$XREL" != "x" ]; then 4.2) echo "whatever-whatever-unixware1"; exit 0 ;; + OpenUNIX) + if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x8" ]; then + echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0 + fi + ;; 5) if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x7" ]; then echo "${MACHINE}-sco-unixware7"; exit 0 @@ -127,10 +140,7 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in HP-UX:*) HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "$HPUXVER" in - 11.*) - echo "${MACHINE}-hp-hpux11"; exit 0 - ;; - 10.*) + 1[0-9].*) # HPUX 10 and 11 targets are unified echo "${MACHINE}-hp-hpux10"; exit 0 ;; *) @@ -186,7 +196,7 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in echo "${MACHINE}-whatever-bsdi"; exit 0 ;; - FreeBSD:*) + FreeBSD:*:*:*386*) VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'` MACH=`sysctl -n hw.model` ARCH='whatever' @@ -195,7 +205,6 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in *486* ) MACH="i486" ;; Pentium\ II*) MACH="i686" ;; Pentium* ) MACH="i586" ;; - Alpha* ) MACH="alpha" ;; * ) MACH="$MACHINE" ;; esac case ${MACH} in @@ -204,6 +213,10 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0 ;; + FreeBSD:*) + echo "${MACHINE}-whatever-freebsd"; exit 0 + ;; + NetBSD:*:*:*386*) echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0 ;; @@ -216,15 +229,33 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in echo "${MACHINE}-whatever-openbsd"; exit 0 ;; + OpenUNIX:*) + echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0 + ;; + OSF1:*:*:*alpha*) - echo "${MACHINE}-dec-osf"; exit 0 + OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'` + case "$OSFMAJOR" in + 4|5) + echo "${MACHINE}-dec-tru64"; exit 0 + ;; + 1|2|3) + echo "${MACHINE}-dec-osf"; exit 0 + ;; + *) + echo "${MACHINE}-dec-osf"; exit 0 + ;; + esac ;; QNX:*) - case "$VERSION" in + case "$RELEASE" in 4*) echo "${MACHINE}-whatever-qnx4" ;; + 6*) + echo "${MACHINE}-whatever-qnx6" + ;; *) echo "${MACHINE}-whatever-qnx" ;; @@ -304,6 +335,29 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in echo "mips-sony-newsos4"; exit 0; ;; + CYGWIN*) + case "$RELEASE" in + [bB]*|1.0|1.[12].*) + echo "${MACHINE}-whatever-cygwin_pre1.3" + ;; + *) + echo "${MACHINE}-whatever-cygwin" + ;; + esac + exit 0 + ;; + + *"CRAY T3E") + echo "t3e-cray-unicosmk"; exit 0; + ;; + + *CRAY*) + echo "j90-cray-unicos"; exit 0; + ;; + + NONSTOP_KERNEL*) + echo "nsr-tandem-nsk"; exit 0; + ;; esac # @@ -343,18 +397,43 @@ exit 0 # figure out if gcc is available and if so we use it otherwise # we fallback to whatever cc does on the system -GCCVER=`(gcc --version) 2>/dev/null` +GCCVER=`(gcc -dumpversion) 2>/dev/null` if [ "$GCCVER" != "" ]; then CC=gcc - # then strip off whatever prefix Cygnus prepends the number with... - GCCVER=`echo $GCCVER | sed 's/^[a-z]*\-//'` + # then strip off whatever prefix egcs prepends the number with... + # Hopefully, this will work for any future prefixes as well. + GCCVER=`echo $GCCVER | sed 's/^[a-zA-Z]*\-//'` + # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion + # does give us what we want though, so we use that. We just just the + # major and minor version numbers. # peak single digit before and after first dot, e.g. 2.95.1 gives 29 GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'` else CC=cc fi - +GCCVER=${GCCVER:-0} +if [ "$SYSTEM" = "HP-UX" ];then + # By default gcc is a ILP32 compiler (with long long == 64). + GCC_BITS="32" + if [ $GCCVER -ge 30 ]; then + # PA64 support only came in with gcc 3.0.x. + # We look for the preprocessor symbol __LP64__ indicating + # 64bit bit long and pointer. sizeof(int) == 32 on HPUX64. + if gcc -v -E -x c /dev/null 2>&1 | grep __LP64__ > /dev/null; then + GCC_BITS="64" + fi + fi +fi if [ "$SYSTEM" = "SunOS" ]; then + if [ $GCCVER -ge 30 ]; then + # 64-bit ABI isn't officially supported in gcc 3.0, but it appears + # to be working, at the very least 'make test' passes... + if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then + GCC_ARCH="-m64" + else + GCC_ARCH="-m32" + fi + fi # check for WorkShop C, expected output is "cc: blah-blah C x.x" CCVER=`(cc -V 2>&1) 2>/dev/null | \ egrep -e '^cc: .* C [0-9]\.[0-9]' | \ @@ -385,7 +464,10 @@ if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then fi fi -GCCVER=${GCCVER:-0} +if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc + (cc) 2>&1 | grep -iv "command not found" > /dev/null && CC=cc +fi + CCVER=${CCVER:-0} # read the output of the embedded GuessOS @@ -418,9 +500,9 @@ case "$GUESSOS" in mips4-sgi-irix64) echo "WARNING! If you wish to build 64-bit library, then you have to" echo " invoke './Configure irix64-mips4-$CC' *manually*." - echo " Type return if you want to continue, Ctrl-C to abort." if [ "$TEST" = "false" ]; then - read waste < /dev/tty + echo " You have about 5 seconds to press Ctrl-C to abort." + (stty -icanon min 0 time 50; read waste) < /dev/tty fi CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` CPU=${CPU:-0} @@ -461,6 +543,10 @@ EOF ${CC} -o dummy dummy.c && OUT=`./dummy ${MACHINE}` rm dummy dummy.c ;; + ppc64-*-linux2) + #Use the standard target for PPC architecture until we create a + #special one for the 64bit architecture. + OUT="linux-ppc" ;; ppc-*-linux2) OUT="linux-ppc" ;; m68k-*-linux*) OUT="linux-m68k" ;; ia64-*-linux?) OUT="linux-ia64" ;; @@ -468,12 +554,13 @@ EOF ppc-apple-darwin*) OUT="darwin-ppc-cc" ;; i386-apple-darwin*) OUT="darwin-i386-cc" ;; sparc64-*-linux2) - #Before we can uncomment following lines we have to wait at least - #till 64-bit glibc for SPARC is operational:-( - #echo "WARNING! If you wish to build 64-bit library, then you have to" - #echo " invoke './Configure linux64-sparcv9' *manually*." - #echo " Type return if you want to continue, Ctrl-C to abort." - #read waste < /dev/tty + echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI" + echo " and wish to build 64-bit library, then you have to" + echo " invoke './Configure linux64-sparcv9' *manually*." + if [ "$TEST" = "false" ]; then + echo " You have about 5 seconds to press Ctrl-C to abort." + (stty -icanon min 0 time 50; read waste) < /dev/tty + fi OUT="linux-sparcv9" ;; sparc-*-linux2) KARCH=`awk '/^type/{print$3}' /proc/cpuinfo` @@ -483,54 +570,178 @@ EOF sun4d) OUT="linux-sparcv8" ;; *) OUT="linux-sparcv7" ;; esac ;; + parisc-*-linux2) + CPUARCH=`awk '/cpu family/{print substr($5,1,3)}' /proc/cpuinfo` + CPUSCHEDULE=`awk '/^cpu.[ ]: PA/{print substr($3,3)}' /proc/cpuinfo` + + # ??TODO ?? Model transformations + # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off + # assuming no further arch. identification will ever be used by GCC. + # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC. + # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers + # for these chips in the future. + # PA7300LC -> 7100LC (1.1) + # PA8200 -> 8000 (2.0) + # PA8500 -> 8000 (2.0) + # PA8600 -> 8000 (2.0) + + CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8?00/8000/'` + # Finish Model transformations + + options="$options -mschedule=$CPUSCHEDULE -march=$CPUARCH" + OUT="linux-parisc" ;; arm*-*-linux2) OUT="linux-elf-arm" ;; s390-*-linux2) OUT="linux-s390" ;; - *-*-linux2) OUT="linux-elf" ;; + s390x-*-linux?) OUT="linux-s390x" ;; + x86_64-*-linux?) OUT="linux-x86_64" ;; + *-*-linux2) OUT="linux-elf" + if [ "$GCCVER" -gt 28 ]; then + if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then + OUT="linux-pentium" + fi + if grep '^model.*Pentium Pro' /proc/cpuinfo >/dev/null ; then + OUT="linux-ppro" + fi + if grep '^model.*K6' /proc/cpuinfo >/dev/null ; then + OUT="linux-k6" + fi + fi ;; *-*-linux1) OUT="linux-aout" ;; sun4u*-*-solaris2) + OUT="solaris-sparcv9-$CC" ISA64=`(isalist) 2>/dev/null | grep sparcv9` - if [ "$ISA64" != "" -a "$CC" = "cc" -a $CCVER -ge 50 ]; then + if [ "$ISA64" != "" ]; then + if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then echo "WARNING! If you wish to build 64-bit library, then you have to" echo " invoke './Configure solaris64-sparcv9-cc' *manually*." - echo " Type return if you want to continue, Ctrl-C to abort." if [ "$TEST" = "false" ]; then - read waste < /dev/tty + echo " You have about 5 seconds to press Ctrl-C to abort." + (stty -icanon min 0 time 50; read waste) < /dev/tty fi + elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then + # $GCC_ARCH denotes default ABI chosen by compiler driver + # (first one found on the $PATH). I assume that user + # expects certain consistency with the rest of his builds + # and therefore switch over to 64-bit. + OUT="solaris64-sparcv9-gcc" + echo "WARNING! If you wish to build 32-bit library, then you have to" + echo " invoke './Configure solaris-sparcv9-gcc' *manually*." + if [ "$TEST" = "false" ]; then + echo " You have about 5 seconds to press Ctrl-C to abort." + (stty -icanon min 0 time 50; read waste) < /dev/tty + fi + elif [ "$GCC_ARCH" = "-m32" ]; then + echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI" + echo " and wish to build 64-bit library, then you have to" + echo " invoke './Configure solaris64-sparcv9-gcc' *manually*." + if [ "$TEST" = "false" ]; then + echo " You have about 5 seconds to press Ctrl-C to abort." + (stty -icanon min 0 time 50; read waste) < /dev/tty + fi + fi fi - OUT="solaris-sparcv9-$CC" ;; + ;; sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;; sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;; sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;; *86*-*-solaris2) OUT="solaris-x86-$CC" ;; *-*-sunos4) OUT="sunos-$CC" ;; alpha*-*-freebsd*) OUT="FreeBSD-alpha" ;; + sparc64-*-freebsd*) OUT="FreeBSD-sparc64" ;; *-freebsd[3-9]*) OUT="FreeBSD-elf" ;; *-freebsd[1-2]*) OUT="FreeBSD" ;; *86*-*-netbsd) OUT="NetBSD-x86" ;; sun3*-*-netbsd) OUT="NetBSD-m68" ;; *-*-netbsd) OUT="NetBSD-sparc" ;; - *86*-*-openbsd) OUT="OpenBSD-x86" ;; alpha*-*-openbsd) OUT="OpenBSD-alpha" ;; + *86*-*-openbsd) OUT="OpenBSD-i386" ;; + m68k*-*-openbsd) OUT="OpenBSD-m68k" ;; + m88k*-*-openbsd) OUT="OpenBSD-m88k" ;; + mips*-*-openbsd) OUT="OpenBSD-mips" ;; pmax*-*-openbsd) OUT="OpenBSD-mips" ;; + powerpc*-*-openbsd) OUT="OpenBSD-powerpc" ;; + sparc64*-*-openbsd) OUT="OpenBSD-sparc64" ;; + sparc*-*-openbsd) OUT="OpenBSD-sparc" ;; + vax*-*-openbsd) OUT="OpenBSD-vax" ;; + hppa*-*-openbsd) OUT="OpenBSD-hppa" ;; *-*-openbsd) OUT="OpenBSD" ;; *86*-*-bsdi4) OUT="bsdi-elf-gcc" ;; - *-*-osf) OUT="alpha-cc" ;; + *-*-osf) OUT="alphaold-cc" ;; + *-*-tru64) OUT="alpha-cc" ;; + *-*-OpenUNIX*) + if [ "$CC" = "gcc" ]; then + OUT="OpenUNIX-8-gcc" + else + OUT="OpenUNIX-8" + fi + ;; *-*-unixware7) OUT="unixware-7" ;; *-*-UnixWare7) OUT="unixware-7" ;; *-*-Unixware7) OUT="unixware-7" ;; - *-*-unixware[1-2]*) OUT="unixware-2.0" ;; - *-*-UnixWare[1-2]*) OUT="unixware-2.0" ;; - *-*-Unixware[1-2]*) OUT="unixware-2.0" ;; + *-*-unixware20*) OUT="unixware-2.0" ;; + *-*-unixware21*) OUT="unixware-2.1" ;; + *-*-UnixWare20*) OUT="unixware-2.0" ;; + *-*-UnixWare21*) OUT="unixware-2.1" ;; + *-*-Unixware20*) OUT="unixware-2.0" ;; + *-*-Unixware21*) OUT="unixware-2.1" ;; BS2000-siemens-sysv4) OUT="BS2000-OSD" ;; RM*-siemens-sysv4) OUT="ReliantUNIX" ;; *-siemens-sysv4) OUT="SINIX" ;; - *-hpux1*) OUT="hpux-parisc-$CC" - options="$options -D_REENTRANT" ;; + *-hpux1*) + if [ $CC = "gcc" ]; + then + if [ $GCC_BITS = "64" ]; then + OUT="hpux64-parisc-gcc" + else + OUT="hpux-parisc-gcc" + fi + else + OUT="hpux-parisc-$CC" + fi + KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null` + KERNEL_BITS=${KERNEL_BITS:-32} + CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null` + CPU_VERSION=${CPU_VERSION:-0} + # See for further info on CPU_VERSION. + if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU + echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi." + echo " If you wish to build 32-bit library, the you have to" + echo " invoke './Configure hpux-ia64-cc' *manually*." + if [ "$TEST" = "false" ]; then + echo " You have about 5 seconds to press Ctrl-C to abort." + (stty -icanon min 0 time 50; read waste) < /dev/tty + fi + OUT="hpux64-ia64-cc" + elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU + if [ "$CC" = "cc" ]; then + OUT="hpux-parisc2-cc" # can't we have hpux-parisc2-gcc? + fi + if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then + echo "WARNING! If you wish to build 64-bit library then you have to" + echo " invoke './Configure hpux64-parisc2-cc' *manually*." + if [ "$TEST" = "false" ]; then + echo " You have about 5 seconds to press Ctrl-C to abort." + (stty -icanon min 0 time 50; read waste) < /dev/tty + fi + fi + elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU + : + elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU + : + else # Motorola(?) CPU + OUT="hpux-$CC" + fi + options="$options -D_REENTRANT" ;; *-hpux) OUT="hpux-parisc-$CC" ;; # these are all covered by the catchall below # *-aix) OUT="aix-$CC" ;; # *-dgux) OUT="dgux" ;; mips-sony-newsos4) OUT="newsos4-gcc" ;; + *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;; + *-*-cygwin) OUT="Cygwin" ;; + t3e-cray-unicosmk) OUT="cray-t3e" ;; + j90-cray-unicos) OUT="cray-j90" ;; + nsr-tandem-nsk) OUT="tandem-c89" ;; *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;; esac @@ -565,7 +776,7 @@ case "$GUESSOS" in i386-*) options="$options 386" ;; esac -for i in bf cast des dh dsa ec hmac md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa sha +for i in bf cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 aes ripemd rsa sha do if [ ! -d crypto/$i ] then