X-Git-Url: https://git.openssl.org/?p=openssl.git;a=blobdiff_plain;f=FAQ;h=9f6dc63d4fcf6781834008bd958463a44182c333;hp=96e816cf7a718ffe36efd7f6330c0c664f4db50c;hb=f7a3296d8c8746b9901e95674425f300a6dfd1d4;hpb=4b5598682a3ed929ab058cef3a056c528b557168

diff --git a/FAQ b/FAQ
index 96e816cf7a..9f6dc63d4f 100644
--- a/FAQ
+++ b/FAQ
@@ -31,6 +31,8 @@ OpenSSL  -  Frequently Asked Questions
 * Why does my browser give a warning about a mismatched hostname?
 * How do I install a CA certificate into a browser?
 * Why is OpenSSL x509 DN output not conformant to RFC2253?
+* What is a "128 bit certificate"? Can I create one with OpenSSL?
+* Why does OpenSSL set the authority key identifier extension incorrectly?
 
 [BUILD] Questions about building and testing OpenSSL
 
@@ -48,6 +50,7 @@ OpenSSL  -  Frequently Asked Questions
 * Why does OpenBSD-i386 build fail on des-586.s with "Unimplemented segment type"?
 * Why does the OpenSSL test suite fail in sha512t on x86 CPU?
 * Why does compiler fail to compile sha512.c?
+* Test suite still fails, what to do?
 
 [PROG] Questions about programming with OpenSSL
 
@@ -72,7 +75,7 @@ OpenSSL  -  Frequently Asked Questions
 * Which is the current version of OpenSSL?
 
 The current version is available from <URL: http://www.openssl.org>.
-OpenSSL 0.9.7g was released on April 11, 2005.
+OpenSSL 0.9.8a was released on October 11th, 2005.
 
 In addition to the current stable release, you can also access daily
 snapshots of the OpenSSL development version at <URL:
@@ -143,8 +146,8 @@ less Unix-centric, it might have been used much earlier.
 
 With version 0.9.6 OpenSSL was extended to interface to external crypto
 hardware. This was realized in a special release '0.9.6-engine'. With
-version 0.9.7 (not yet released) the changes were merged into the main
-development line, so that the special release is no longer necessary.
+version 0.9.7 the changes were merged into the main development line,
+so that the special release is no longer necessary.
 
 * How do I check the authenticity of the OpenSSL distribution?
 
@@ -386,6 +389,62 @@ interface, the "-nameopt" option could be introduded. See the manual
 page of the "openssl x509" commandline tool for details. The old behaviour
 has however been left as default for the sake of compatibility.
 
+* What is a "128 bit certificate"? Can I create one with OpenSSL?
+
+The term "128 bit certificate" is a highly misleading marketing term. It does
+*not* refer to the size of the public key in the certificate! A certificate
+containing a 128 bit RSA key would have negligible security.
+
+There were various other names such as "magic certificates", "SGC
+certificates", "step up certificates" etc.
+
+You can't generally create such a certificate using OpenSSL but there is no
+need to any more. Nowadays web browsers using unrestricted strong encryption
+are generally available.
+
+When there were tight restrictions on the export of strong encryption
+software from the US only weak encryption algorithms could be freely exported
+(initially 40 bit and then 56 bit). It was widely recognised that this was
+inadequate. A relaxation of the rules allowed the use of strong encryption but
+only to an authorised server.
+
+Two slighly different techniques were developed to support this, one used by
+Netscape was called "step up", the other used by MSIE was called "Server Gated
+Cryptography" (SGC). When a browser initially connected to a server it would
+check to see if the certificate contained certain extensions and was issued by
+an authorised authority. If these test succeeded it would reconnect using
+strong encryption.
+
+Only certain (initially one) certificate authorities could issue the
+certificates and they generally cost more than ordinary certificates.
+
+Although OpenSSL can create certificates containing the appropriate extensions
+the certificate would not come from a permitted authority and so would not
+be recognized.
+
+The export laws were later changed to allow almost unrestricted use of strong
+encryption so these certificates are now obsolete.
+
+
+* Why does OpenSSL set the authority key identifier (AKID) extension incorrectly?
+
+It doesn't: this extension is often the cause of confusion.
+
+Consider a certificate chain A->B->C so that A signs, B and B signs C. Suppose
+certificate C contains AKID.
+
+The purpose of this extension is to identify the authority certificate B. This
+can be done either by including the subject key identifier of B or its issuer
+name and serial number.
+
+In this latter case because it is identifying certifcate B it must contain the
+issuer name and serial number of B.
+
+It is often wrongly assumed that it should contain the subject name of B. If it
+did this would be redundant information because it would duplicate the issuer
+name of C.
+
+
 [BUILD] =======================================================================
 
 * Why does the linker complain about undefined symbols?
@@ -617,6 +676,18 @@ the module in question. The recommendation is to disable SHA-512 by
 adding no-sha512 to ./config [or ./Configure] command line. Another
 possible alternative might be to switch to GCC.
 
+* Test suite still fails, what to do?
+
+Another common reason for failure to complete some particular test is
+simply bad code generated by a buggy component in toolchain or deficiency
+in run-time environment. There are few cases documented in PROBLEMS file,
+consult it for possible workaround before you beat the drum. Even if you
+don't find solution or even mention there, do reserve for possibility of
+a compiler bug. Compiler bugs might appear in rather bizarre ways, they
+never make sense, and tend to emerge when you least expect them. In order
+to identify one, drop optimization level, e.g. by editing CFLAG line in
+top-level Makefile, recompile and re-run the test.
+
 [PROG] ========================================================================
 
 * Is OpenSSL thread-safe?
@@ -649,10 +720,10 @@ your application must link  against the same by which OpenSSL was
 built.  If you are using MS Visual C++ (Studio) this can be changed
 by:
 
-1.  Select Settings... from the Project Menu.
-2.  Select the C/C++ Tab.
-3.  Select "Code Generation from the "Category" drop down list box
-4.  Select the Appropriate library (see table below) from the "Use
+ 1. Select Settings... from the Project Menu.
+ 2. Select the C/C++ Tab.
+ 3. Select "Code Generation from the "Category" drop down list box
+ 4. Select the Appropriate library (see table below) from the "Use
     run-time library" drop down list box.  Perform this step for both
     your debug and release versions of your application (look at the
     top left of the settings panel to change between the two)
@@ -672,16 +743,19 @@ Note that debug and release libraries are NOT interchangeable.  If you
 built OpenSSL with /MD your application must use /MD and cannot use /MDd.
 
 As per 0.9.8 the above limitation is eliminated for .DLLs. OpenSSL
-.DLLs compiled with some specific run-time option [we recommend the
+.DLLs compiled with some specific run-time option [we insist on the
 default /MD] can be deployed with application compiled with different
 option or even different compiler. But there is a catch! Instead of
 re-compiling OpenSSL toolkit, as you would have to with prior versions,
 you have to compile small C snippet with compiler and/or options of
 your choice. The snippet gets installed as
 <install-root>/include/openssl/applink.c and should be either added to
-your project or simply #include-d in one [and only one] of your source
-files. Failure to do either manifests itself as fatal "no
-OPENSSL_Applink" error.
+your application project or simply #include-d in one [and only one]
+of your application source files. Failure to link this shim module
+into your application manifests itself as fatal "no OPENSSL_Applink"
+run-time error. An explicit reminder is due that in this situation
+[mixing compiler options] it is as important to add CRYPTO_malloc_init
+prior first call to OpenSSL.
 
 * How do I read or write a DER encoded buffer using the ASN1 functions?