X-Git-Url: https://git.openssl.org/?p=openssl.git;a=blobdiff_plain;f=CHANGES;h=d1e772d56115fbac4cb2f261a6623a3bf0e5c6f5;hp=32a7c7b46a167db0316d572bddb9b8a389331f01;hb=a8a8a917c0c0d36162fdc0cbf84ab17282cef3e9;hpb=3d9a51f7edc48ebf4252c6585943c635261aa28f

diff --git a/CHANGES b/CHANGES
index 32a7c7b46a..d1e772d561 100644
--- a/CHANGES
+++ b/CHANGES
@@ -2,7 +2,127 @@
  OpenSSL CHANGES
  _______________
 
- Changes between 1.0.2h and 1.1.0  [xx XXX xxxx]
+ Changes between 1.1.0a and 1.1.1 [xx XXX xxxx]
+
+  *)
+
+  *) 'openssl passwd' can now produce SHA256 and SHA512 based output,
+     using the algorithm defined in
+     https://www.akkadia.org/drepper/SHA-crypt.txt
+     [Richard Levitte]
+
+ Changes between 1.1.0b and 1.1.0c [xx XXX xxxx]
+
+  *) Removed automatic addition of RPATH in shared libraries and executables,
+     as this was a remainder from OpenSSL 1.0.x and isn't needed any more.
+     [Richard Levitte]
+
+ Changes between 1.1.0a and 1.1.0b [26 Sep 2016]
+
+  *) Fix Use After Free for large message sizes
+
+     The patch applied to address CVE-2016-6307 resulted in an issue where if a
+     message larger than approx 16k is received then the underlying buffer to
+     store the incoming message is reallocated and moved. Unfortunately a
+     dangling pointer to the old location is left which results in an attempt to
+     write to the previously freed location. This is likely to result in a
+     crash, however it could potentially lead to execution of arbitrary code.
+
+     This issue only affects OpenSSL 1.1.0a.
+
+     This issue was reported to OpenSSL by Robert Święcki.
+     (CVE-2016-6309)
+     [Matt Caswell]
+
+ Changes between 1.1.0 and 1.1.0a [22 Sep 2016]
+
+  *) OCSP Status Request extension unbounded memory growth
+
+     A malicious client can send an excessively large OCSP Status Request
+     extension. If that client continually requests renegotiation, sending a
+     large OCSP Status Request extension each time, then there will be unbounded
+     memory growth on the server. This will eventually lead to a Denial Of
+     Service attack through memory exhaustion. Servers with a default
+     configuration are vulnerable even if they do not support OCSP. Builds using
+     the "no-ocsp" build time option are not affected.
+
+     This issue was reported to OpenSSL by Shi Lei (Gear Team, Qihoo 360 Inc.)
+     (CVE-2016-6304)
+     [Matt Caswell]
+
+  *) SSL_peek() hang on empty record
+
+     OpenSSL 1.1.0 SSL/TLS will hang during a call to SSL_peek() if the peer
+     sends an empty record. This could be exploited by a malicious peer in a
+     Denial Of Service attack.
+
+     This issue was reported to OpenSSL by Alex Gaynor.
+     (CVE-2016-6305)
+     [Matt Caswell]
+
+  *) Excessive allocation of memory in tls_get_message_header() and
+     dtls1_preprocess_fragment()
+
+     A (D)TLS message includes 3 bytes for its length in the header for the
+     message. This would allow for messages up to 16Mb in length. Messages of
+     this length are excessive and OpenSSL includes a check to ensure that a
+     peer is sending reasonably sized messages in order to avoid too much memory
+     being consumed to service a connection. A flaw in the logic of version
+     1.1.0 means that memory for the message is allocated too early, prior to
+     the excessive message length check. Due to way memory is allocated in
+     OpenSSL this could mean an attacker could force up to 21Mb to be allocated
+     to service a connection. This could lead to a Denial of Service through
+     memory exhaustion. However, the excessive message length check still takes
+     place, and this would cause the connection to immediately fail. Assuming
+     that the application calls SSL_free() on the failed conneciton in a timely
+     manner then the 21Mb of allocated memory will then be immediately freed
+     again. Therefore the excessive memory allocation will be transitory in
+     nature. This then means that there is only a security impact if:
+
+     1) The application does not call SSL_free() in a timely manner in the event
+     that the connection fails
+     or
+     2) The application is working in a constrained environment where there is
+     very little free memory
+     or
+     3) The attacker initiates multiple connection attempts such that there are
+     multiple connections in a state where memory has been allocated for the
+     connection; SSL_free() has not yet been called; and there is insufficient
+     memory to service the multiple requests.
+
+     Except in the instance of (1) above any Denial Of Service is likely to be
+     transitory because as soon as the connection fails the memory is
+     subsequently freed again in the SSL_free() call. However there is an
+     increased risk during this period of application crashes due to the lack of
+     memory - which would then mean a more serious Denial of Service.
+
+     This issue was reported to OpenSSL by Shi Lei (Gear Team, Qihoo 360 Inc.)
+     (CVE-2016-6307 and CVE-2016-6308)
+     [Matt Caswell]
+
+  *) solaris-x86-cc, i.e. 32-bit configuration with vendor compiler,
+     had to be removed. Primary reason is that vendor assembler can't
+     assemble our modules with -KPIC flag. As result it, assembly
+     support, was not even available as option. But its lack means
+     lack of side-channel resistant code, which is incompatible with
+     security by todays standards. Fortunately gcc is readily available
+     prepackaged option, which we firmly point at...
+     [Andy Polyakov]
+
+ Changes between 1.0.2h and 1.1.0  [25 Aug 2016]
+
+  *) Windows command-line tool supports UTF-8 opt-in option for arguments
+     and console input. Setting OPENSSL_WIN32_UTF8 environment variable
+     (to any value) allows Windows user to access PKCS#12 file generated
+     with Windows CryptoAPI and protected with non-ASCII password, as well
+     as files generated under UTF-8 locale on Linux also protected with
+     non-ASCII password.
+     [Andy Polyakov]
+
+  *) To mitigate the SWEET32 attack (CVE-2016-2183), 3DES cipher suites
+     have been disabled by default and removed from DEFAULT, just like RC4.
+     See the RC4 item below to re-enable both.
+     [Rich Salz]
 
   *) The method for finding the storage location for the Windows RAND seed file
      has changed. First we check %RANDFILE%. If that is not set then we check
@@ -861,10 +981,6 @@
      combination: call this in fips_test_suite.
      [Steve Henson]
 
-  *) Add support for Dual EC DRBG from SP800-90. Update DRBG algorithm test
-     and POST to handle Dual EC cases.
-     [Steve Henson]
-
   *) Add support for canonical generation of DSA parameter 'g'. See 
      FIPS 186-3 A.2.3.