-#! /usr/bin/perl
+#! /usr/bin/env perl
+# Copyright 2015-2016 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License"). You may not use
+# this file except in compliance with the License. You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
use strict;
use warnings;
use File::Basename;
use File::Compare qw/compare_text/;
+use if $^O ne "VMS", 'File::Glob' => qw/glob/;
use OpenSSL::Test qw/:DEFAULT srctop_dir srctop_file/;
use OpenSSL::Test::Utils qw/disabled alldisabled available_protocols/;
setup("test_ssl_new");
$ENV{TEST_CERTS_DIR} = srctop_dir("test", "certs");
+$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
-my @conf_srcs = glob(srctop_file("test", "ssl-tests", "*.conf"));
-my @conf_files = map {basename($_)} @conf_srcs;
-
-# 02-protocol-version.conf test results depend on the configuration of enabled
-# protocols. We only verify generated sources in the default configuration.
-my $is_default = (disabled("ssl3") && !disabled("tls1") &&
- !disabled("tls1_1") && !disabled("tls1_2"));
+my @conf_srcs = glob(srctop_file("test", "ssl-tests", "*.conf.in"));
+map { s/;.*// } @conf_srcs if $^O eq "VMS";
+my @conf_files = map { basename($_, ".in") } @conf_srcs;
+map { s/\^// } @conf_files if $^O eq "VMS";
-my %conf_dependent_tests = ("02-protocol-version.conf" => 1);
+# We hard-code the number of tests to double-check that the globbing above
+# finds all files as expected.
+plan tests => 23; # = scalar @conf_srcs
+
+# Some test results depend on the configuration of enabled protocols. We only
+# verify generated sources in the default configuration.
+my $is_default_tls = (disabled("ssl3") && !disabled("tls1") &&
+ !disabled("tls1_1") && !disabled("tls1_2") &&
+ disabled("tls1_3"));
+
+my $is_default_dtls = (!disabled("dtls1") && !disabled("dtls1_2"));
+
+my @all_pre_tls1_3 = ("ssl3", "tls1", "tls1_1", "tls1_2");
+my $no_tls = alldisabled(available_protocols("tls"));
+my $no_pre_tls1_3 = alldisabled(@all_pre_tls1_3);
+my $no_dtls = alldisabled(available_protocols("dtls"));
+my $no_npn = disabled("nextprotoneg");
+my $no_ct = disabled("ct");
+my $no_ec = disabled("ec");
+my $no_dh = disabled("dh");
+my $no_dsa = disabled("dsa");
+my $no_ec2m = disabled("ec2m");
+my $no_ocsp = disabled("ocsp");
+
+# Add your test here if the test conf.in generates test cases and/or
+# expectations dynamically based on the OpenSSL compile-time config.
+my %conf_dependent_tests = (
+ "02-protocol-version.conf" => !$is_default_tls,
+ "04-client_auth.conf" => !$is_default_tls || !$is_default_dtls,
+ "05-sni.conf" => disabled("tls1_1"),
+ "07-dtls-protocol-version.conf" => !$is_default_dtls,
+ "10-resumption.conf" => !$is_default_tls,
+ "11-dtls_resumption.conf" => !$is_default_dtls,
+ "16-dtls-certstatus.conf" => !$is_default_dtls || !disabled("sctp"),
+ "17-renegotiate.conf" => disabled("tls1_2"),
+ "18-dtls-renegotiate.conf" => disabled("dtls1_2") || !disabled("sctp"),
+ "19-mac-then-encrypt.conf" => !$is_default_tls,
+ "20-cert-select.conf" => !$is_default_tls || $no_dh || $no_dsa,
+ "22-compression.conf" => !$is_default_tls,
+);
+
+# Add your test here if it should be skipped for some compile-time
+# configurations. Default is $no_tls but some tests have different skip
+# conditions.
+my %skip = (
+ "07-dtls-protocol-version.conf" => $no_dtls,
+ "08-npn.conf" => (disabled("tls1") && disabled("tls1_1")
+ && disabled("tls1_2")) || $no_npn,
+ "10-resumption.conf" => disabled("tls1_1") || disabled("tls1_2"),
+ "11-dtls_resumption.conf" => disabled("dtls1") || disabled("dtls1_2"),
+ "12-ct.conf" => $no_tls || $no_ct || $no_ec,
+ # We could run some of these tests without TLS 1.2 if we had a per-test
+ # disable instruction but that's a bizarre configuration not worth
+ # special-casing for.
+ # We should review this once we have TLS 1.3.
+ "13-fragmentation.conf" => disabled("tls1_2"),
+ "14-curves.conf" => disabled("tls1_2") || $no_ec || $no_ec2m,
+ "15-certstatus.conf" => $no_tls || $no_ocsp,
+ "16-dtls-certstatus.conf" => $no_dtls || $no_ocsp,
+ "18-dtls-renegotiate.conf" => $no_dtls,
+ "19-mac-then-encrypt.conf" => $no_pre_tls1_3,
+ "20-cert-select.conf" => disabled("tls1_2") || $no_ec,
+ "21-key-update.conf" => disabled("tls1_3"),
+ "22-compression.conf" => disabled("zlib") || $no_tls,
+ "23-srp.conf" => (disabled("tls1") && disabled ("tls1_1")
+ && disabled("tls1_2")) || disabled("srp"),
+);
foreach my $conf (@conf_files) {
subtest "Test configuration $conf" => sub {
- test_conf($conf, $conf_dependent_tests{$conf} ? 0 : 1);
+ test_conf($conf,
+ $conf_dependent_tests{$conf} || $^O eq "VMS" ? 0 : 1,
+ defined($skip{$conf}) ? $skip{$conf} : $no_tls);
}
}
-# We hard-code the number of tests to double-check that the globbing above
-# finds all files as expected.
-plan tests => 2; # = scalar @conf_files
-
sub test_conf {
plan tests => 3;
- my ($conf, $check_source) = @_;
+ my ($conf, $check_source, $skip) = @_;
my $conf_file = srctop_file("test", "ssl-tests", $conf);
my $tmp_file = "${conf}.$$.tmp";
skip 'failure', 2 unless
ok(run(perltest(["generate_ssl_tests.pl", $input_file],
+ interpreter_args => [ "-I", srctop_dir("test", "testlib")],
stdout => $tmp_file)),
"Getting output from generate_ssl_tests.pl.");
}
# Test 3. Run the test.
- my $no_tls = alldisabled(available_protocols("tls"));
- skip "No TLS tests available; skipping tests", 1 if $no_tls;
+ skip "No tests available; skipping tests", 1 if $skip;
skip "Stale sources; skipping tests", 1 if !$run_test;
ok(run(test(["ssl_test", $tmp_file])), "running ssl_test $conf");
projects / openssl.git / blobdiff