#! /usr/bin/env perl
-# Copyright 2015-2016 The OpenSSL Project Authors. All Rights Reserved.
+# Copyright 2015-2018 The OpenSSL Project Authors. All Rights Reserved.
#
-# Licensed under the OpenSSL license (the "License"). You may not use
+# Licensed under the Apache License 2.0 (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
# in the file LICENSE in the source distribution or at
# https://www.openssl.org/source/license.html
use strict;
use warnings;
-use File::Spec;
+use OpenSSL::Test::Utils;
use OpenSSL::Test qw/:DEFAULT srctop_file/;
setup("test_req");
-plan tests => 3;
+plan tests => 16;
require_ok(srctop_file('test','recipes','tconversion.pl'));
+# What type of key to generate?
+my @req_new;
+if (disabled("rsa")) {
+ @req_new = ("-newkey", "dsa:".srctop_file("apps", "dsa512.pem"));
+} else {
+ @req_new = ("-new");
+ note("There should be a 2 sequences of .'s and some +'s.");
+ note("There should not be more that at most 80 per line");
+}
+
+# Check for duplicate -addext parameters, and one "working" case.
+my @addext_args = ( "openssl", "req", "-new", "-out", "testreq.pem",
+ "-config", srctop_file("test", "test.cnf"), @req_new );
+my $val = "subjectAltName=DNS:example.com";
+my $val2 = " " . $val;
+my $val3 = $val;
+$val3 =~ s/=/ =/;
+ok( run(app([@addext_args, "-addext", $val])));
+ok(!run(app([@addext_args, "-addext", $val, "-addext", $val])));
+ok(!run(app([@addext_args, "-addext", $val, "-addext", $val2])));
+ok(!run(app([@addext_args, "-addext", $val, "-addext", $val3])));
+ok(!run(app([@addext_args, "-addext", $val2, "-addext", $val3])));
+
+subtest "generating alt certificate requests with RSA" => sub {
+ plan tests => 3;
+
+ SKIP: {
+ skip "RSA is not supported by this OpenSSL build", 2
+ if disabled("rsa");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-section", "altreq",
+ "-new", "-out", "testreq-rsa.pem", "-utf8",
+ "-key", srctop_file("test", "testrsa.pem")])),
+ "Generating request");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-verify", "-in", "testreq-rsa.pem", "-noout"])),
+ "Verifying signature on request");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-section", "altreq",
+ "-verify", "-in", "testreq-rsa.pem", "-noout"])),
+ "Verifying signature on request");
+ }
+};
+
+
+subtest "generating certificate requests with RSA" => sub {
+ plan tests => 2;
+
+ SKIP: {
+ skip "RSA is not supported by this OpenSSL build", 2
+ if disabled("rsa");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-new", "-out", "testreq-rsa.pem", "-utf8",
+ "-key", srctop_file("test", "testrsa.pem")])),
+ "Generating request");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-verify", "-in", "testreq-rsa.pem", "-noout"])),
+ "Verifying signature on request");
+ }
+};
+
+subtest "generating certificate requests with DSA" => sub {
+ plan tests => 2;
+
+ SKIP: {
+ skip "DSA is not supported by this OpenSSL build", 2
+ if disabled("dsa");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-new", "-out", "testreq-dsa.pem", "-utf8",
+ "-key", srctop_file("test", "testdsa.pem")])),
+ "Generating request");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-verify", "-in", "testreq-dsa.pem", "-noout"])),
+ "Verifying signature on request");
+ }
+};
+
+subtest "generating certificate requests with ECDSA" => sub {
+ plan tests => 2;
+
+ SKIP: {
+ skip "ECDSA is not supported by this OpenSSL build", 2
+ if disabled("ec");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-new", "-out", "testreq-ec.pem", "-utf8",
+ "-key", srctop_file("test", "testec-p256.pem")])),
+ "Generating request");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-verify", "-in", "testreq-ec.pem", "-noout"])),
+ "Verifying signature on request");
+ }
+};
+
+subtest "generating certificate requests with Ed25519" => sub {
+ plan tests => 2;
+
+ SKIP: {
+ skip "Ed25519 is not supported by this OpenSSL build", 2
+ if disabled("ec");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-new", "-out", "testreq-ed25519.pem", "-utf8",
+ "-key", srctop_file("test", "tested25519.pem")])),
+ "Generating request");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-verify", "-in", "testreq-ed25519.pem", "-noout"])),
+ "Verifying signature on request");
+ }
+};
+
+subtest "generating certificate requests with Ed448" => sub {
+ plan tests => 2;
+
+ SKIP: {
+ skip "Ed448 is not supported by this OpenSSL build", 2
+ if disabled("ec");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-new", "-out", "testreq-ed448.pem", "-utf8",
+ "-key", srctop_file("test", "tested448.pem")])),
+ "Generating request");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-verify", "-in", "testreq-ed448.pem", "-noout"])),
+ "Verifying signature on request");
+ }
+};
+
+subtest "generating certificate requests" => sub {
+ plan tests => 2;
+
+ ok(run(app(["openssl", "req", "-config", srctop_file("test", "test.cnf"),
+ @req_new, "-out", "testreq.pem"])),
+ "Generating request");
+
+ ok(run(app(["openssl", "req", "-config", srctop_file("test", "test.cnf"),
+ "-verify", "-in", "testreq.pem", "-noout"])),
+ "Verifying signature on request");
+};
+
+subtest "generating SM2 certificate requests" => sub {
+ plan tests => 4;
+
+ SKIP: {
+ skip "SM2 is not supported by this OpenSSL build", 4
+ if disabled("sm2");
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-new", "-key", srctop_file("test", "certs", "sm2.key"),
+ "-sigopt", "distid:1234567812345678",
+ "-out", "testreq-sm2.pem", "-sm3"])),
+ "Generating SM2 certificate request");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-verify", "-in", "testreq-sm2.pem", "-noout",
+ "-vfyopt", "distid:1234567812345678", "-sm3"])),
+ "Verifying signature on SM2 certificate request");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-new", "-key", srctop_file("test", "certs", "sm2.key"),
+ "-sigopt", "hexdistid:DEADBEEF",
+ "-out", "testreq-sm2.pem", "-sm3"])),
+ "Generating SM2 certificate request with hex id");
+
+ ok(run(app(["openssl", "req",
+ "-config", srctop_file("test", "test.cnf"),
+ "-verify", "-in", "testreq-sm2.pem", "-noout",
+ "-vfyopt", "hexdistid:DEADBEEF", "-sm3"])),
+ "Verifying signature on SM2 certificate request");
+ }
+};
+
my @openssl_args = ("req", "-config", srctop_file("apps", "openssl.cnf"));
run_conversion('req conversions',
- "testreq.pem");
+ "testreq.pem");
run_conversion('req conversions -- testreq2',
- "testreq2.pem");
+ srctop_file("test", "testreq2.pem"));
sub run_conversion {
my $title = shift;
my $reqfile = shift;
subtest $title => sub {
- run(app(["openssl", @openssl_args,
- "-in", $reqfile, "-inform", "p",
- "-noout", "-text"],
- stderr => "req-check.err", stdout => undef));
- open DATA, "req-check.err";
- SKIP: {
- plan skip_all => "skipping req conversion test for $reqfile"
- if grep /Unknown Public Key/, map { s/\R//; } <DATA>;
-
- tconversion("req", "testreq.pem", @openssl_args);
- }
- close DATA;
- unlink "req-check.err";
-
- done_testing();
+ run(app(["openssl", @openssl_args,
+ "-in", $reqfile, "-inform", "p",
+ "-noout", "-text"],
+ stderr => "req-check.err", stdout => undef));
+ open DATA, "req-check.err";
+ SKIP: {
+ plan skip_all => "skipping req conversion test for $reqfile"
+ if grep /Unknown Public Key/, map { s/\R//; } <DATA>;
+
+ tconversion("req", $reqfile, @openssl_args);
+ }
+ close DATA;
+ unlink "req-check.err";
+
+ done_testing();
};
}
projects / openssl.git / blobdiff