$!
$!
$! P5, if defined, specifies the C pointer size. Ignored on VAX.
+$! ("64=ARGV" gives more efficient code with HP C V7.3 or newer.)
$! Supported values are:
$!
-$! "" Compile with default (/NOPOINTER_SIZE)
-$! 32 Compile with /POINTER_SIZE=32 (SHORT)
-$! 64 Compile with /POINTER_SIZE=64[=ARGV] (LONG[=ARGV])
+$! "" Compile with default (/NOPOINTER_SIZE)
+$! 32 Compile with /POINTER_SIZE=32 (SHORT)
+$! 64 Compile with /POINTER_SIZE=64[=ARGV] (LONG[=ARGV])
$! (Automatically select ARGV if compiler supports it.)
$! 64= Compile with /POINTER_SIZE=64 (LONG).
$! 64=ARGV Compile with /POINTER_SIZE=64=ARGV (LONG=ARGV).
$ TEST_FILES = "BNTEST,ECTEST,ECDSATEST,ECDHTEST,IDEATEST,"+ -
"MD2TEST,MD4TEST,MD5TEST,HMACTEST,WP_TEST,"+ -
"RC2TEST,RC4TEST,RC5TEST,"+ -
- "DESTEST,SHATEST,SHA1TEST,SHA256T,SHA512T,"+ -
+ "DESTEST,SHA1TEST,SHA256T,SHA512T,"+ -
"MDC2TEST,RMDTEST,"+ -
"RANDTEST,DHTEST,ENGINETEST,"+ -
- "BFTEST,CASTTEST,SSLTEST,EXPTEST,DSATEST,RSA_TEST,"+ -
- "EVP_TEST,IGETEST,JPAKETEST,SRPTEST"
+ "GOST2814789TEST,"+ -
+ "BFTEST,CASTTEST,SSLTEST,"+ -
+ "EXPTEST,DSATEST,RSA_TEST,"+ -
+ "EVP_TEST,EVP_EXTRA_TEST,IGETEST,"+ -
+ "JPAKETEST,SRPTEST,V3NAMETEST,"+ -
+ "HEARTBEAT_TEST,P5_CRPT2_TEST,"+ -
+ "CONSTANT_TIME_TEST"
$! Should we add MTTEST,PQ_TEST,LH_TEST,DIVTEST,TABTEST as well?
$!
$! Additional directory information.
-$ T_D_BNTEST := [-.crypto.bn]
-$ T_D_ECTEST := [-.crypto.ec]
-$ T_D_ECDSATEST := [-.crypto.ecdsa]
-$ T_D_ECDHTEST := [-.crypto.ecdh]
-$ T_D_IDEATEST := [-.crypto.idea]
-$ T_D_MD2TEST := [-.crypto.md2]
-$ T_D_MD4TEST := [-.crypto.md4]
-$ T_D_MD5TEST := [-.crypto.md5]
-$ T_D_HMACTEST := [-.crypto.hmac]
-$ T_D_WP_TEST := [-.crypto.whrlpool]
-$ T_D_RC2TEST := [-.crypto.rc2]
-$ T_D_RC4TEST := [-.crypto.rc4]
-$ T_D_RC5TEST := [-.crypto.rc5]
-$ T_D_DESTEST := [-.crypto.des]
-$ T_D_SHATEST := [-.crypto.sha]
-$ T_D_SHA1TEST := [-.crypto.sha]
-$ T_D_SHA256T := [-.crypto.sha]
-$ T_D_SHA512T := [-.crypto.sha]
-$ T_D_MDC2TEST := [-.crypto.mdc2]
-$ T_D_RMDTEST := [-.crypto.ripemd]
-$ T_D_RANDTEST := [-.crypto.rand]
-$ T_D_DHTEST := [-.crypto.dh]
-$ T_D_ENGINETEST := [-.crypto.engine]
-$ T_D_BFTEST := [-.crypto.bf]
-$ T_D_CASTTEST := [-.crypto.cast]
-$ T_D_SSLTEST := [-.ssl]
-$ T_D_EXPTEST := [-.crypto.bn]
-$ T_D_DSATEST := [-.crypto.dsa]
-$ T_D_RSA_TEST := [-.crypto.rsa]
-$ T_D_EVP_TEST := [-.crypto.evp]
-$ T_D_IGETEST := [-.test]
-$ T_D_JPAKETEST := [-.crypto.jpake]
-$ T_D_SRPTEST := [-.crypto.srp]
+$ T_D_BNTEST := [-.crypto.bn]
+$ T_D_ECTEST := [-.crypto.ec]
+$ T_D_ECDSATEST := [-.crypto.ecdsa]
+$ T_D_ECDHTEST := [-.crypto.ecdh]
+$ T_D_IDEATEST := [-.crypto.idea]
+$ T_D_MD2TEST := [-.crypto.md2]
+$ T_D_MD4TEST := [-.crypto.md4]
+$ T_D_MD5TEST := [-.crypto.md5]
+$ T_D_HMACTEST := [-.crypto.hmac]
+$ T_D_WP_TEST := [-.crypto.whrlpool]
+$ T_D_RC2TEST := [-.crypto.rc2]
+$ T_D_RC4TEST := [-.crypto.rc4]
+$ T_D_RC5TEST := [-.crypto.rc5]
+$ T_D_DESTEST := [-.crypto.des]
+$ T_D_SHATEST := [-.crypto.sha]
+$ T_D_SHA1TEST := [-.crypto.sha]
+$ T_D_SHA256T := [-.crypto.sha]
+$ T_D_SHA512T := [-.crypto.sha]
+$ T_D_MDC2TEST := [-.crypto.mdc2]
+$ T_D_RMDTEST := [-.crypto.ripemd]
+$ T_D_RANDTEST := [-.crypto.rand]
+$ T_D_DHTEST := [-.crypto.dh]
+$ T_D_ENGINETEST := [-.crypto.engine]
+$ T_D_GOST2814789TEST := [-.engines.ccgost]
+$ T_D_BFTEST := [-.crypto.bf]
+$ T_D_CASTTEST := [-.crypto.cast]
+$ T_D_SSLTEST := [-.ssl]
+$ T_D_EXPTEST := [-.crypto.bn]
+$ T_D_DSATEST := [-.crypto.dsa]
+$ T_D_RSA_TEST := [-.crypto.rsa]
+$ T_D_EVP_TEST := [-.crypto.evp]
+$ T_D_EVP_EXTRA_TEST := [-.crypto.evp]
+$ T_D_IGETEST := [-.test]
+$ T_D_JPAKETEST := [-.crypto.jpake]
+$ T_D_SRPTEST := [-.crypto.srp]
+$ T_D_V3NAMETEST := [-.crypto.x509v3]
+$ T_D_HEARTBEAT_TEST := [-.ssl]
+$ T_D_P5_CRPT2_TEST := [-.crypto.evp]
+$ T_D_CONSTANT_TIME_TEST := [-.crypto]
$!
$ TCPIP_PROGRAMS = ",,"
$ IF COMPILER .EQS. "VAXC" THEN -
$!
$! Set basic C compiler /INCLUDE directories.
$!
-$ CC_INCLUDES = "SYS$DISK:[-],SYS$DISK:[-.CRYPTO]"
+$ CC_INCLUDES = "SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[-.CRYPTO]"
$!
$! Check To See If P1 Is Blank.
$!
$!
$ IF (P5 .EQS. "32")
$ THEN
-$ POINTER_SIZE = "/POINTER_SIZE=32"
+$ POINTER_SIZE = " /POINTER_SIZE=32"
$ ELSE
$ POINTER_SIZE = F$EDIT( P5, "COLLAPSE, UPCASE")
$ IF ((POINTER_SIZE .EQS. "64") .OR. -
$ LIB32 = ""
$ IF (F$EXTRACT( 2, 1, POINTER_SIZE) .EQS. "=")
$ THEN
-$! Explicit user choice: "64" or "64=ARGV".
-$ IF (POINTER_SIZE .EQS. "64=") THEN POINTER_SIZE = "64"
+$! Explicit user choice: "64" or "64=ARGV".
+$ IF (POINTER_SIZE .EQS. "64=") THEN POINTER_SIZE = "64"
$ ELSE
-$ SET NOON
+$ SET NOON
$ DEFINE /USER_MODE SYS$OUTPUT NL:
$ DEFINE /USER_MODE SYS$ERROR NL:
$ CC /NOLIST /NOOBJECT /POINTER_SIZE=64=ARGV NL:
-$ IF ($STATUS .AND. %X0FFF0000) .EQ. %X00030000
-$ THEN
-$ ! If we got here, it means DCL complained like this:
-$ ! %DCL-W-NOVALU, value not allowed - remove value specification
-$ ! \64=\
-$ !
-$ ! If the compiler was run, logicals defined in /USER would
-$ ! have been deassigned automatically. However, when DCL
-$ ! complains, they aren't, so we do it here (it might be
-$ ! unnecessary, but just in case there will be another error
-$ ! message further on that we don't want to miss)
+$ IF ($STATUS .AND. %X0FFF0000) .EQ. %X00030000
+$ THEN
+$ ! If we got here, it means DCL complained like this:
+$ ! %DCL-W-NOVALU, value not allowed - remove value specification
+$ ! \64=\
+$ !
+$ ! If the compiler was run, logicals defined in /USER would
+$ ! have been deassigned automatically. However, when DCL
+$ ! complains, they aren't, so we do it here (it might be
+$ ! unnecessary, but just in case there will be another error
+$ ! message further on that we don't want to miss)
$ DEASSIGN /USER_MODE SYS$ERROR
$ DEASSIGN /USER_MODE SYS$OUTPUT
-$ ELSE
-$ POINTER_SIZE = POINTER_SIZE + "=ARGV"
-$ ENDIF
-$ SET ON
+$ ELSE
+$ POINTER_SIZE = POINTER_SIZE + "=ARGV"
+$ ENDIF
+$ SET ON
$ ENDIF
-$ POINTER_SIZE = "/POINTER_SIZE=''POINTER_SIZE'"
+$ POINTER_SIZE = " /POINTER_SIZE=''POINTER_SIZE'"
$ ELSE
$!
$! Tell The User Entered An Invalid Option.
$ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS
$ CCEXTRAFLAGS = ""
$ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS
-$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR"
+$ CCDISABLEWARNINGS = "" !!! "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR"
$ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN -
CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS
$!
$ CC = "CC"
$ IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
THEN CC = "CC /DECC"
-$ CC = CC + "/''CC_OPTIMIZE' /''DEBUGGER' /STANDARD=RELAXED"+ -
+$ CC = CC + " /''CC_OPTIMIZE' /''DEBUGGER' /STANDARD=RELAXED"+ -
"''POINTER_SIZE' /NOLIST /PREFIX=ALL" + -
- "/INCLUDE=(''CC_INCLUDES')" + CCEXTRAFLAGS
+ " /INCLUDE=(''CC_INCLUDES') " + CCEXTRAFLAGS
$!
$! Define The Linker Options File Name.
$!
$ CC4DISABLEWARNINGS = "DOLLARID"
$ ELSE
$ CC4DISABLEWARNINGS = CCDISABLEWARNINGS + ",DOLLARID"
-$ CCDISABLEWARNINGS = "/WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))"
+$ CCDISABLEWARNINGS = " /WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))"
$ ENDIF
-$ CC4DISABLEWARNINGS = "/WARNING=(DISABLE=(" + CC4DISABLEWARNINGS + "))"
+$ CC4DISABLEWARNINGS = " /WARNING=(DISABLE=(" + CC4DISABLEWARNINGS + "))"
$ ELSE
$ CCDISABLEWARNINGS = ""
$ CC4DISABLEWARNINGS = ""
$ ENDIF
-$ CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
+$ CC = CC + " /DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
$!
$! Show user the result
$!
$ __HERE = F$EDIT(__HERE,"UPCASE")
$ __TOP = __HERE - "TEST]"
$ __INCLUDE = __TOP + "INCLUDE.OPENSSL]"
+$ __INTERNAL = __TOP + "CRYPTO.INCLUDE.INTERNAL]"
$!
$! Set up the logical name OPENSSL to point at the include directory
$!
$ DEFINE OPENSSL /NOLOG '__INCLUDE'
+$ DEFINE INTERNAL /NOLOG '__INTERNAL'
$!
$! Done
$!
$ IF __SAVE_OPENSSL .EQS. ""
$ THEN
$ DEASSIGN OPENSSL
+$ DEASSIGN INTERNAL
$ ELSE
$ DEFINE /NOLOG OPENSSL '__SAVE_OPENSSL'
$ ENDIF
projects / openssl.git / blobdiff