openssl#5668: corrections after compiling with -qinfo=all:als.

[openssl.git] / ssl / packet_locl.h

diff --git a/ssl/packet_locl.h b/ssl/packet_locl.h
index 55e41bba15fc37d036fb3d13de399ed5520043b7..8e553e62b5ac29e731cb65da6d4e83c29fb20670 100644 (file)
--- a/ssl/packet_locl.h
+++ b/ssl/packet_locl.h
@@ -160,6 +160,18 @@ __owur static ossl_inline int PACKET_get_net_2(PACKET *pkt, unsigned int *data)
     return 1;
 }
 
+/* Same as PACKET_get_net_2() but for a size_t */
+__owur static ossl_inline int PACKET_get_net_2_len(PACKET *pkt, size_t *data)
+{
+    unsigned int i;
+    int ret = PACKET_get_net_2(pkt, &i);
+
+    if (ret)
+        *data = (size_t)i;
+
+    return ret;
+}
+
 /*
  * Peek ahead at 3 bytes in network order from |pkt| and store the value in
  * |*data|
@@ -189,6 +201,18 @@ __owur static ossl_inline int PACKET_get_net_3(PACKET *pkt, unsigned long *data)
     return 1;
 }
 
+/* Same as PACKET_get_net_3() but for a size_t */
+__owur static ossl_inline int PACKET_get_net_3_len(PACKET *pkt, size_t *data)
+{
+    unsigned long i;
+    int ret = PACKET_get_net_3(pkt, &i);
+
+    if (ret)
+        *data = (size_t)i;
+
+    return ret;
+}
+
 /*
  * Peek ahead at 4 bytes in network order from |pkt| and store the value in
  * |*data|
@@ -219,6 +243,18 @@ __owur static ossl_inline int PACKET_get_net_4(PACKET *pkt, unsigned long *data)
     return 1;
 }
 
+/* Same as PACKET_get_net_4() but for a size_t */
+__owur static ossl_inline int PACKET_get_net_4_len(PACKET *pkt, size_t *data)
+{
+    unsigned long i;
+    int ret = PACKET_get_net_4(pkt, &i);
+
+    if (ret)
+        *data = (size_t)i;
+
+    return ret;
+}
+
 /* Peek ahead at 1 byte from |pkt| and store the value in |*data| */
 __owur static ossl_inline int PACKET_peek_1(const PACKET *pkt,
                                             unsigned int *data)
@@ -242,6 +278,18 @@ __owur static ossl_inline int PACKET_get_1(PACKET *pkt, unsigned int *data)
     return 1;
 }
 
+/* Same as PACKET_get_1() but for a size_t */
+__owur static ossl_inline int PACKET_get_1_len(PACKET *pkt, size_t *data)
+{
+    unsigned int i;
+    int ret = PACKET_get_1(pkt, &i);
+
+    if (ret)
+        *data = (size_t)i;
+
+    return ret;
+}
+
 /*
  * Peek ahead at 4 bytes in reverse network order from |pkt| and store the value
  * in |*data|
@@ -577,6 +625,9 @@ struct wpacket_st {
     /* The buffer where we store the output data */
     BUF_MEM *buf;
 
+    /* Fixed sized buffer which can be used as an alternative to buf */
+    unsigned char *staticbuf;
+
     /*
      * Offset into the buffer where we are currently writing. We use an offset
      * in case the buffer grows and gets reallocated.
@@ -622,6 +673,13 @@ int WPACKET_init_len(WPACKET *pkt, BUF_MEM *buf, size_t lenbytes);
  */
 int WPACKET_init(WPACKET *pkt, BUF_MEM *buf);
 
+/*
+ * Same as WPACKET_init_len except we do not use a growable BUF_MEM structure.
+ * A fixed buffer of memory |buf| of size |len| is used instead. A failure will
+ * occur if you attempt to write beyond the end of the buffer
+ */
+int WPACKET_init_static_len(WPACKET *pkt, unsigned char *buf, size_t len,
+                            size_t lenbytes);
 /*
  * Set the flags to be applied to the current sub-packet
  */
@@ -641,6 +699,15 @@ int WPACKET_close(WPACKET *pkt);
  */
 int WPACKET_finish(WPACKET *pkt);
 
+/*
+ * Iterate through all the sub-packets and write out their lengths as if they
+ * were being closed. The lengths will be overwritten with the final lengths
+ * when the sub-packets are eventually closed (which may be different if more
+ * data is added to the WPACKET). This function fails if a sub-packet is of 0
+ * length and WPACKET_FLAGS_ABANDON_ON_ZERO_LENGTH is set.
+ */
+int WPACKET_fill_lengths(WPACKET *pkt);
+
 /*
  * Initialise a new sub-packet. Additionally |lenbytes| of data is preallocated
  * at the start of the sub-packet to store its length once we know it. Don't
@@ -670,7 +737,7 @@ int WPACKET_start_sub_packet(WPACKET *pkt);
 /*
  * Allocate bytes in the WPACKET for the output. This reserves the bytes
  * and counts them as "written", but doesn't actually do the writing. A pointer
- * to the allocated bytes is stored in |*allocbytes|.
+ * to the allocated bytes is stored in |*allocbytes|. |allocbytes| may be NULL.
  * WARNING: the allocated bytes must be filled in immediately, without further
  * WPACKET_* calls. If not then the underlying buffer may be realloc'd and
  * change its location.
@@ -707,7 +774,7 @@ int WPACKET_sub_allocate_bytes__(WPACKET *pkt, size_t len,
  * maximum size will be. If this function is used, then it should be immediately
  * followed by a WPACKET_allocate_bytes() call before any other WPACKET
  * functions are called (unless the write to the allocated bytes is abandoned).
- * 
+ *
  * For example: If we are generating a signature, then the size of that
  * signature may not be known in advance. We can use WPACKET_reserve_bytes() to
  * handle this:
@@ -766,6 +833,9 @@ int WPACKET_set_max_size(WPACKET *pkt, size_t maxsize);
 /* Copy |len| bytes of data from |*src| into the WPACKET. */
 int WPACKET_memcpy(WPACKET *pkt, const void *src, size_t len);
 
+/* Set |len| bytes of data to |ch| into the WPACKET. */
+int WPACKET_memset(WPACKET *pkt, int ch, size_t len);
+
 /*
  * Copy |len| bytes of data from |*src| into the WPACKET and prefix with its
  * length (consuming |lenbytes| of data for the length). Don't call this
@@ -796,6 +866,12 @@ int WPACKET_get_total_written(WPACKET *pkt, size_t *written);
  */
 int WPACKET_get_length(WPACKET *pkt, size_t *len);
 
+/*
+ * Returns a pointer to the current write location, but does not allocate any
+ * bytes.
+ */
+unsigned char *WPACKET_get_curr(WPACKET *pkt);
+
 /* Release resources in a WPACKET if a failure has occurred. */
 void WPACKET_cleanup(WPACKET *pkt);