/* init things to blank */
s->in_handshake++;
- if (!SSL_in_init(s) || SSL_in_before(s))
- SSL_clear(s);
+ if (!SSL_in_init(s) || SSL_in_before(s)) {
+ if (!SSL_clear(s))
+ return -1;
+ }
s->d1->listen = listen;
#ifndef OPENSSL_NO_SCTP
s->in_handshake, NULL);
#endif
- if (s->cert == NULL) {
- SSLerr(SSL_F_DTLS1_ACCEPT, SSL_R_NO_CERTIFICATE_SET);
- return (-1);
- }
#ifndef OPENSSL_NO_HEARTBEATS
/*
* If we're awaiting a HeartbeatResponse, pretend we already got and
if (s->init_buf == NULL) {
if ((buf = BUF_MEM_new()) == NULL) {
ret = -1;
+ s->state = SSL_ST_ERR;
goto end;
}
if (!BUF_MEM_grow(buf, SSL3_RT_MAX_PLAIN_LENGTH)) {
BUF_MEM_free(buf);
ret = -1;
+ s->state = SSL_ST_ERR;
goto end;
}
s->init_buf = buf;
if (!ssl3_setup_buffers(s)) {
ret = -1;
+ s->state = SSL_ST_ERR;
goto end;
}
#endif
if (!ssl_init_wbio_buffer(s, 1)) {
ret = -1;
+ s->state = SSL_ST_ERR;
goto end;
}
* listening
*/
if (listen) {
- memcpy(s->s3->write_sequence, s->s3->read_sequence,
- sizeof(s->s3->write_sequence));
+ DTLS_RECORD_LAYER_resync_write(&s->rlayer);
}
/* If we're just listening, stop here */
BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SCTP_ADD_AUTH_KEY,
sizeof(sctpauthkey), sctpauthkey);
#endif
-#ifndef OPENSSL_NO_TLSEXT
if (s->tlsext_ticket_expected)
s->state = SSL3_ST_SW_SESSION_TICKET_A;
else
s->state = SSL3_ST_SW_CHANGE_A;
-#else
- s->state = SSL3_ST_SW_CHANGE_A;
-#endif
} else
s->state = SSL3_ST_SW_CERT_A;
s->init_num = 0;
ret = ssl3_send_server_certificate(s);
if (ret <= 0)
goto end;
-#ifndef OPENSSL_NO_TLSEXT
+
if (s->tlsext_status_expected)
s->state = SSL3_ST_SW_CERT_STATUS_A;
else
skip = 1;
s->state = SSL3_ST_SW_KEY_EXCH_A;
}
-#else
- } else
- skip = 1;
-
- s->state = SSL3_ST_SW_KEY_EXCH_A;
-#endif
s->init_num = 0;
break;
#ifndef OPENSSL_NO_PSK
|| ((alg_k & SSL_kPSK) && s->ctx->psk_identity_hint)
#endif
- || (alg_k & (SSL_kDHE | SSL_kDHr | SSL_kDHd))
+ || (alg_k & SSL_kDHE)
|| (alg_k & SSL_kECDHE)
|| ((alg_k & SSL_kRSA)
&& (s->cert->pkeys[SSL_PKEY_RSA_ENC].privatekey == NULL
* RFC 2246):
*/
((s->s3->tmp.new_cipher->algorithm_auth & SSL_aNULL) &&
- /*
- * ... except when the application insists on
- * verification (against the specs, but s3_clnt.c accepts
- * this for SSL 3)
- */
- !(s->verify_mode & SSL_VERIFY_FAIL_IF_NO_PEER_CERT)) ||
/*
- * never request cert in Kerberos ciphersuites
+ * ... except when the application insists on
+ * verification (against the specs, but s3_clnt.c accepts
+ * this for SSL 3)
*/
- (s->s3->tmp.new_cipher->algorithm_auth & SSL_aKRB5)
+ !(s->verify_mode & SSL_VERIFY_FAIL_IF_NO_PEER_CERT))
/*
* With normal PSK Certificates and Certificate Requests
* are omitted
ret = ssl3_send_certificate_request(s);
if (ret <= 0)
goto end;
-#ifndef NETSCAPE_HANG_BUG
s->state = SSL3_ST_SW_SRVR_DONE_A;
# ifndef OPENSSL_NO_SCTP
if (BIO_dgram_is_sctp(SSL_get_wbio(s))) {
s->state = DTLS1_SCTP_ST_SW_WRITE_SOCK;
}
# endif
-#else
- s->state = SSL3_ST_SW_FLUSH;
- s->s3->tmp.next_state = SSL3_ST_SR_CERT_A;
-# ifndef OPENSSL_NO_SCTP
- if (BIO_dgram_is_sctp(SSL_get_wbio(s))) {
- s->d1->next_state = s->s3->tmp.next_state;
- s->s3->tmp.next_state = DTLS1_SCTP_ST_SW_WRITE_SOCK;
- }
-# endif
-#endif
s->init_num = 0;
}
break;
break;
if (!s->s3->handshake_buffer) {
SSLerr(SSL_F_DTLS1_ACCEPT, ERR_R_INTERNAL_ERROR);
+ s->state = SSL_ST_ERR;
return -1;
}
/*
*/
if (!(s->s3->flags & SSL_SESS_FLAG_EXTMS)) {
s->s3->flags |= TLS1_FLAGS_KEEP_HANDSHAKE;
- if (!ssl3_digest_cached_records(s))
+ if (!ssl3_digest_cached_records(s)) {
+ s->state = SSL_ST_ERR;
return -1;
+ }
}
} else {
s->state = SSL3_ST_SR_CERT_VRFY_A;
case SSL3_ST_SR_CERT_VRFY_A:
case SSL3_ST_SR_CERT_VRFY_B:
- /*
- * This *should* be the first time we enable CCS, but be
- * extra careful about surrounding code changes. We need
- * to set this here because we don't know if we're
- * expecting a CertificateVerify or not.
- */
- if (!s->s3->change_cipher_spec)
- s->d1->change_cipher_spec_ok = 1;
- /* we should decide if we expected this one */
ret = ssl3_get_cert_verify(s);
if (ret <= 0)
goto end;
case SSL3_ST_SR_FINISHED_A:
case SSL3_ST_SR_FINISHED_B:
/*
- * Enable CCS for resumed handshakes.
- * In a full handshake, we end up here through
- * SSL3_ST_SR_CERT_VRFY_B, so change_cipher_spec_ok was
- * already set. Receiving a CCS clears the flag, so make
- * sure not to re-enable it to ban duplicates.
+ * Enable CCS. Receiving a CCS clears the flag, so make
+ * sure not to re-enable it to ban duplicates. This *should* be the
+ * first time we have received one - but we check anyway to be
+ * cautious.
* s->s3->change_cipher_spec is set when a CCS is
* processed in d1_pkt.c, and remains set until
* the client's Finished message is read.
dtls1_stop_timer(s);
if (s->hit)
s->state = SSL_ST_OK;
-#ifndef OPENSSL_NO_TLSEXT
else if (s->tlsext_ticket_expected)
s->state = SSL3_ST_SW_SESSION_TICKET_A;
-#endif
else
s->state = SSL3_ST_SW_CHANGE_A;
s->init_num = 0;
break;
-#ifndef OPENSSL_NO_TLSEXT
case SSL3_ST_SW_SESSION_TICKET_A:
case SSL3_ST_SW_SESSION_TICKET_B:
ret = ssl3_send_newsession_ticket(s);
s->init_num = 0;
break;
-#endif
-
case SSL3_ST_SW_CHANGE_A:
case SSL3_ST_SW_CHANGE_B:
s->session->cipher = s->s3->tmp.new_cipher;
if (!s->method->ssl3_enc->setup_key_block(s)) {
ret = -1;
+ s->state = SSL_ST_ERR;
goto end;
}
SSL3_CHANGE_CIPHER_SERVER_WRITE))
{
ret = -1;
+ s->state = SSL_ST_ERR;
goto end;
}
goto end;
/* break; */
+ case SSL_ST_ERR:
default:
SSLerr(SSL_F_DTLS1_ACCEPT, SSL_R_UNKNOWN_STATE);
ret = -1;
&(s->d1->cookie_len)) == 0) {
SSLerr(SSL_F_DTLS1_SEND_HELLO_VERIFY_REQUEST,
ERR_R_INTERNAL_ERROR);
+ s->state = SSL_ST_ERR;
return 0;
}
projects / openssl.git / blobdiff