$!
$! This procedures accepts two command line options listed below.
$!
-$! Specify one of the following build options for P1.
+$! P1 specifies one of the following build options:
$!
$! ALL Just build "everything".
$! CONFIG Just build the "[.CRYPTO._xxx]OPENSSLCONF.H" file.
$! APPS Just build the "[.xxx.EXE.APPS]" application programs for OpenSSL.
$! ENGINES Just build the "[.xxx.EXE.ENGINES]" application programs for OpenSSL.
$!
+$! P2, if defined, specifies the C pointer size. Ignored on VAX.
+$! ("64=ARGV" gives more efficient code with HP C V7.3 or newer.)
+$! Supported values are:
$!
-$! For 64 bit architectures (Alpha and IA64), specify the pointer size as P2.
-$! For 32 bit architectures (VAX), P2 is ignored.
-$! Currently supported values are:
+$! "" Compile with default (/NOPOINTER_SIZE).
+$! 32 Compile with /POINTER_SIZE=32 (SHORT).
+$! 64 Compile with /POINTER_SIZE=64[=ARGV] (LONG[=ARGV]).
+$! (Automatically select ARGV if compiler supports it.)
+$! 64= Compile with /POINTER_SIZE=64 (LONG).
+$! 64=ARGV Compile with /POINTER_SIZE=64=ARGV (LONG=ARGV).
$!
-$! 32 To ge a library compiled with /POINTER_SIZE=32
-$! 64 To ge a library compiled with /POINTER_SIZE=64
+$! P3 specifies DEBUG or NODEBUG, to compile with or without debugging
+$! information.
$!
-$!
-$! Specify DEBUG or NODEBUG as P3 to compile with or without debugging
-$! information.
-$!
-$! Specify which compiler as P4 to try to compile under.
+$! P4 specifies which compiler to try to compile under.
$!
$! VAXC For VAX C.
$! DECC For DEC C.
$! use at build time (this works with DEC C). This is
$! the default.
$!
-$! P6, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
+$! P6, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up).
+$!
+$! P7, if defined, specifies a directory where ZLIB files (zlib.h,
+$! libz.olb) may be found. Optionally, a non-default object library
+$! name may be included ("dev:[dir]libz_64.olb", for example).
+$!
$!
+$! Announce/identify.
+$!
+$ proc = f$environment( "procedure")
+$ write sys$output "@@@ "+ -
+ f$parse( proc, , , "name")+ f$parse( proc, , , "type")
$!
$ DEF_ORIG = F$ENVIRONMENT( "DEFAULT")
$ ON ERROR THEN GOTO TIDY
$!
$ ENDIF
$!
+$ ARCHD = ARCH
+$ LIB32 = "32"
+$ POINTER_SIZE = ""
+$!
$! Get VMS version.
$!
$ VMS_VERSION = f$edit( f$getsyi( "VERSION"), "TRIM")
$!
$! Tell The User We Are Creating The [.CRYPTO._xxx]OPENSSLCONF.H File.
$!
-$ WRITE SYS$OUTPUT "Creating [.CRYPTO._''ARCH']OPENSSLCONF.H Include File."
+$ WRITE SYS$OUTPUT "Creating [.CRYPTO.''ARCHD']OPENSSLCONF.H Include File."
$!
$! First, make sure the directory exists.
$!
-$ IF F$PARSE("SYS$DISK:[.CRYPTO._''ARCH']") .EQS. "" THEN -
- CREATE/DIRECTORY SYS$DISK:[.CRYPTO._'ARCH']
+$ IF F$PARSE("SYS$DISK:[.CRYPTO.''ARCHD']") .EQS. "" THEN -
+ CREATE/DIRECTORY SYS$DISK:[.CRYPTO.'ARCHD']
$!
$! Different tar/UnZip versions/option may have named the file differently
$ IF F$SEARCH("[.crypto]opensslconf.h_in") .NES. ""
$! Create The [.CRYPTO._xxx]OPENSSLCONF.H File.
$! Make sure it has the right format.
$!
-$ OSCH_NAME = "SYS$DISK:[.CRYPTO._''ARCH']OPENSSLCONF.H"
+$ OSCH_NAME = "SYS$DISK:[.CRYPTO.''ARCHD']OPENSSLCONF.H"
$ CREATE /FDL=SYS$INPUT: 'OSCH_NAME'
RECORD
FORMAT stream_lf
$ WRITE H_FILE "#ifndef OPENSSL_SYS_VMS"
$ WRITE H_FILE "# define OPENSSL_SYS_VMS"
$ WRITE H_FILE "#endif"
-$
+$!
$! One of the best way to figure out what the list should be is to do
-$! the followin on a Unix system:
+$! the following on a Unix system:
$! grep OPENSSL_NO_ crypto/*/*.h ssl/*.h engines/*.h engines/*/*.h|grep ':# *if'|sed -e 's/^.*def //'|sort|uniq
$! For that reason, the list will also always end up in alphabetical order
$ CONFIG_LOGICALS := AES,-
DH,-
DSA,-
EC,-
+ EC2M,-
ECDH,-
ECDSA,-
+ EC_NISTP_64_GCC_128,-
ENGINE,-
ERR,-
EVP,-
GMP,-
GOST,-
HASH_COMP,-
+ HEARTBEATS,-
HMAC,-
IDEA,-
JPAKE,-
MD4,-
MD5,-
MDC2,-
+ NEXTPROTONEG,-
OCSP,-
PSK,-
RC2,-
RFC3779,-
RIPEMD,-
RSA,-
+ SCTP,-
SEED,-
SHA,-
SHA0,-
SHA256,-
SHA512,-
SOCK,-
+ SRP,-
SSL2,-
+ SSL_INTERN,-
+ SSL_TRACE,-
STACK,-
STATIC_ENGINE,-
STDIO,-
DSA/GOST;-
DH/GOST;-
/STATIC_ENGINE;-
- /KRB5
+ /KRB5;-
+ /EC_NISTP_64_GCC_128;-
+ /GMP;-
+ /MD2;-
+ /RC5;-
+ /RFC3779;-
+ /SCTP;-
+ /SSL_TRACE
$ CONFIG_ENABLE_RULES := ZLIB_DYNAMIC/ZLIB;-
/THREADS
$
$! Architecture specific rule addtions
$ IF ARCH .EQS. "VAX"
$ THEN
-$ ! Disable algorithms that require 64 bit integers in C
+$ ! Disable algorithms that require 64-bit integers in C
$ CONFIG_DISABLE_RULES = CONFIG_DISABLE_RULES + -
";/GOST" + -
";/WHIRLPOOL"
$! Apply cascading disable rules
$ CONFIG_DISABLE_I = 0
$ CONFIG_DISABLE_LOOP0:
-$ CONFIG_DISABLE_E = F$EDIT(F$ELEMENT(CONFIG_DISABLE_I,";",CONFIG_DISABLE_RULES),"TRIM")
+$ CONFIG_DISABLE_E = F$EDIT(F$ELEMENT(CONFIG_DISABLE_I,";", -
+ CONFIG_DISABLE_RULES),"TRIM")
$ CONFIG_DISABLE_I = CONFIG_DISABLE_I + 1
$ IF CONFIG_DISABLE_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP0
$ IF CONFIG_DISABLE_E .EQS. ";" THEN GOTO CONFIG_DISABLE_LOOP0_END
$ TO_DISABLE := YES
$ CONFIG_ALGO_I = 0
$ CONFIG_DISABLE_LOOP1:
-$ CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",",CONFIG_DISABLE_ALGOS),"TRIM")
+$ CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",", -
+ CONFIG_DISABLE_ALGOS),"TRIM")
$ CONFIG_ALGO_I = CONFIG_ALGO_I + 1
$ IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP1
$ IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP1_END
$ THEN
$ CONFIG_DEPENDENT_I = 0
$ CONFIG_DISABLE_LOOP2:
-$ CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",",CONFIG_DISABLE_DEPENDENTS),"TRIM")
+$ CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",", -
+ CONFIG_DISABLE_DEPENDENTS),"TRIM")
$ CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1
$ IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP2
$ IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP2_END
$ CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := NO
$ ! Better not to assume defaults at this point...
$ CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES
-$ WRITE SYS$ERROR "''CONFIG_DEPENDENT_E' disabled by rule ''CONFIG_DISABLE_E'"
+$ WRITE SYS$ERROR -
+ "''CONFIG_DEPENDENT_E' disabled by rule ''CONFIG_DISABLE_E'"
$ GOTO CONFIG_DISABLE_LOOP2
$ CONFIG_DISABLE_LOOP2_END:
$ ENDIF
$! Apply cascading enable rules
$ CONFIG_ENABLE_I = 0
$ CONFIG_ENABLE_LOOP0:
-$ CONFIG_ENABLE_E = F$EDIT(F$ELEMENT(CONFIG_ENABLE_I,";",CONFIG_ENABLE_RULES),"TRIM")
+$ CONFIG_ENABLE_E = F$EDIT(F$ELEMENT(CONFIG_ENABLE_I,";", -
+ CONFIG_ENABLE_RULES),"TRIM")
$ CONFIG_ENABLE_I = CONFIG_ENABLE_I + 1
$ IF CONFIG_ENABLE_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP0
$ IF CONFIG_ENABLE_E .EQS. ";" THEN GOTO CONFIG_ENABLE_LOOP0_END
$ TO_ENABLE := YES
$ CONFIG_ALGO_I = 0
$ CONFIG_ENABLE_LOOP1:
-$ CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",",CONFIG_ENABLE_ALGOS),"TRIM")
+$ CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",", -
+ CONFIG_ENABLE_ALGOS),"TRIM")
$ CONFIG_ALGO_I = CONFIG_ALGO_I + 1
$ IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP1
$ IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP1_END
$ THEN
$ CONFIG_DEPENDENT_I = 0
$ CONFIG_ENABLE_LOOP2:
-$ CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",",CONFIG_ENABLE_DEPENDENTS),"TRIM")
+$ CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",", -
+ CONFIG_ENABLE_DEPENDENTS),"TRIM")
$ CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1
$ IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP2
$ IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP2_END
$ CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := YES
$ ! Better not to assume defaults at this point...
$ CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES
-$ WRITE SYS$ERROR "''CONFIG_DEPENDENT_E' enabled by rule ''CONFIG_ENABLE_E'"
+$ WRITE SYS$ERROR -
+ "''CONFIG_DEPENDENT_E' enabled by rule ''CONFIG_ENABLE_E'"
$ GOTO CONFIG_ENABLE_LOOP2
$ CONFIG_ENABLE_LOOP2_END:
$ ENDIF
$ GOTO CONFIG_LOG_LOOP2
$ CONFIG_LOG_LOOP2_END:
$!
+$ WRITE H_FILE ""
+$ WRITE H_FILE "/* 2011-02-23 SMS."
+$ WRITE H_FILE " * On VMS (V8.3), setvbuf() doesn't support a 64-bit"
+$ WRITE H_FILE " * ""in"" pointer, and the help says:"
+$ WRITE H_FILE " * Please note that the previously documented"
+$ WRITE H_FILE " * value _IONBF is not supported."
+$ WRITE H_FILE " * So, skip it on VMS."
+$ WRITE H_FILE " */"
+$ WRITE H_FILE "#define OPENSSL_NO_SETVBUF_IONBF"
+$ WRITE H_FILE "/* STCP support comes with TCPIP 5.7 ECO 2 "
+$ WRITE H_FILE " * enable on newer systems / 2012-02-24 arpadffy */"
+$ WRITE H_FILE "#define OPENSSL_NO_SCTP"
+$ WRITE H_FILE "#define OPENSSL_NO_LIBUNBOUND"
+$ WRITE H_FILE ""
+$!
$! Add in the common "crypto/opensslconf.h.in".
$!
$ TYPE 'OPENSSLCONF_H_IN' /OUTPUT=H_FILE:
$!
$! Purge The [.CRYPTO._xxx]OPENSSLCONF.H file
$!
-$ PURGE SYS$DISK:[.CRYPTO._'ARCH']OPENSSLCONF.H
+$ PURGE SYS$DISK:[.CRYPTO.'ARCHD']OPENSSLCONF.H
$!
$! That's All, Time To RETURN.
$!
$!
$! Tell The User We Are Creating The [.CRYPTO._xxx]BUILDINF.H File.
$!
-$ WRITE SYS$OUTPUT "Creating [.CRYPTO._''ARCH']BUILDINF.H Include File."
+$ WRITE SYS$OUTPUT "Creating [.CRYPTO.''ARCHD']BUILDINF.H Include File."
$!
$! Create The [.CRYPTO._xxx]BUILDINF.H File.
$!
-$ BIH_NAME = "SYS$DISK:[.CRYPTO._''ARCH']BUILDINF.H"
+$ BIH_NAME = "SYS$DISK:[.CRYPTO.''ARCHD']BUILDINF.H"
$ CREATE /FDL=SYS$INPUT: 'BIH_NAME'
RECORD
FORMAT stream_lf
$!
$! Write The [.CRYPTO._xxx]BUILDINF.H File.
$!
-$ WRITE H_FILE "#define CFLAGS ""/POINTER_SIZE=''POINTER_SIZE'"""
-$ WRITE H_FILE "#define PLATFORM ""VMS ''ARCH' ''VMS_VERSION'"""
+$ CFLAGS = ""
+$ if (POINTER_SIZE .nes. "")
+$ then
+$ CFLAGS = CFLAGS+ "/POINTER_SIZE=''POINTER_SIZE'"
+$ endif
+$ if (ZLIB .nes. "")
+$ then
+$ if (CFLAGS .nes. "") then CFLAGS = CFLAGS+ " "
+$ CFLAGS = CFLAGS+ "/DEFINE=ZLIB"
+$ endif
+$!
+$ WRITE H_FILE "#define CFLAGS ""''CFLAGS'"""
+$ WRITE H_FILE "#define PLATFORM ""VMS ''ARCHD' ''VMS_VERSION'"""
$ WRITE H_FILE "#define DATE ""''TIME'"" "
$!
$! Close The [.CRYPTO._xxx]BUILDINF.H File.
$!
$! Purge The [.CRYPTO._xxx]BUILDINF.H File.
$!
-$ PURGE SYS$DISK:[.CRYPTO._'ARCH']BUILDINF.H
+$ PURGE SYS$DISK:[.CRYPTO.'ARCHD']BUILDINF.H
$!
$! Delete [.CRYPTO]BUILDINF.H File, as there might be some residue from Unix.
$!
$!
$ SOFTLINKS:
$!
-$! Tell The User We Are Partly Rebuilding The [.APPS] Directory.
-$!
-$ WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD4.C' File."
-$!
-$ DELETE SYS$DISK:[.APPS]MD4.C;*
-$!
-$! Copy MD4.C from [.CRYPTO.MD4] into [.APPS]
-$!
-$ COPY SYS$DISK:[.CRYPTO.MD4]MD4.C SYS$DISK:[.APPS]
-$!
-$! Tell The User We Are Rebuilding The [.INCLUDE.OPENSSL] Directory.
-$!
-$ WRITE SYS$OUTPUT "Rebuilding The '[.INCLUDE.OPENSSL]' Directory."
-$!
-$! First, make sure the directory exists
-$!
-$ IF F$PARSE("SYS$DISK:[.INCLUDE.OPENSSL]") .EQS. "" THEN -
- CREATE/DIRECTORY SYS$DISK:[.INCLUDE.OPENSSL]
+$!!!! Tell The User We Are Partly Rebuilding The [.APPS] Directory.
+$!!!!
+$!!! WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD4.C' File."
+$!!!!
+$!!! DELETE SYS$DISK:[.APPS]MD4.C;*
+$!!!!
+$!!!! Copy MD4.C from [.CRYPTO.MD4] into [.APPS]
+$!!!!
+$!!! COPY SYS$DISK:[.CRYPTO.MD4]MD4.C SYS$DISK:[.APPS]
+$!
+$! Ensure that the [.include.openssl] directory contains a full set of
+$! real header files. The distribution kit may have left real or fake
+$! symlinks there. Rather than think about what's there, simply delete
+$! the destination files (fake or real symlinks) before copying the real
+$! header files in. (Copying a real header file onto a real symlink
+$! merely duplicates the real header file at its source.)
+$!
+$! Tell The User We Are Rebuilding The [.include.openssl] Directory.
+$!
+$ WRITE SYS$OUTPUT "Rebuilding The '[.include.openssl]' Directory."
+$!
+$! First, make sure the directory exists. If it did exist, delete all
+$! the existing header files (or fake or real symlinks).
+$!
+$ if f$parse( "sys$disk:[.include.openssl]") .eqs. ""
+$ then
+$ create /directory sys$disk:[.include.openssl]
+$ else
+$ delete sys$disk:[.include.openssl]*.h;*
+$ endif
$!
$! Copy All The ".H" Files From The Main Directory.
$!
$ EXHEADER := e_os2.h
-$ COPY 'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL]
+$ copy 'exheader' sys$disk:[.include.openssl]
$!
$! Copy All The ".H" Files From The [.CRYPTO] Directory Tree.
$!
-$ SDIRS := ,-
- _'ARCH',-
- OBJECTS,-
- MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,WHRLPOOL,-
- DES,AES,RC2,RC4,RC5,IDEA,BF,CAST,CAMELLIA,SEED,MODES,-
- BN,EC,RSA,DSA,ECDSA,DH,ECDH,DSO,ENGINE,-
- BUFFER,BIO,STACK,LHASH,RAND,ERR,-
- EVP,ASN1,PEM,X509,X509V3,CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5,-
- STORE,CMS,PQUEUE,TS,JPAKE
-$ EXHEADER_ := crypto.h,opensslv.h,ebcdic.h,symhacks.h,ossl_typ.h
-$ EXHEADER__'ARCH' := opensslconf.h
-$ EXHEADER_OBJECTS := objects.h,obj_mac.h
+$ SDIRS := , -
+ 'ARCHD', -
+ OBJECTS, -
+ MD4, MD5, SHA, MDC2, HMAC, RIPEMD, WHRLPOOL, -
+ DES, AES, RC2, RC4, IDEA, BF, CAST, CAMELLIA, SEED, MODES, -
+ BN, EC, RSA, DSA, ECDSA, DH, ECDH, DSO, ENGINE, -
+ BUFFER, BIO, STACK, LHASH, RAND, ERR, -
+ EVP, ASN1, PEM, X509, X509V3, CONF, TXT_DB, PKCS7, PKCS12, -
+ COMP, OCSP, UI, KRB5, -
+ CMS, PQUEUE, TS, JPAKE, SRP, STORE, CMAC
+$!
+$ EXHEADER_ := crypto.h, opensslv.h, ebcdic.h, symhacks.h, ossl_typ.h
+$ EXHEADER_'ARCHD' := opensslconf.h
+$ EXHEADER_OBJECTS := objects.h, obj_mac.h
$ EXHEADER_MD2 := md2.h
$ EXHEADER_MD4 := md4.h
$ EXHEADER_MD5 := md5.h
$ EXHEADER_HMAC := hmac.h
$ EXHEADER_RIPEMD := ripemd.h
$ EXHEADER_WHRLPOOL := whrlpool.h
-$ EXHEADER_DES := des.h,des_old.h
+$ EXHEADER_DES := des.h, des_old.h
$ EXHEADER_AES := aes.h
$ EXHEADER_RC2 := rc2.h
$ EXHEADER_RC4 := rc4.h
$ EXHEADER_ENGINE := engine.h
$ EXHEADER_BUFFER := buffer.h
$ EXHEADER_BIO := bio.h
-$ EXHEADER_STACK := stack.h,safestack.h
+$ EXHEADER_STACK := stack.h, safestack.h
$ EXHEADER_LHASH := lhash.h
$ EXHEADER_RAND := rand.h
$ EXHEADER_ERR := err.h
$ EXHEADER_EVP := evp.h
-$ EXHEADER_ASN1 := asn1.h,asn1_mac.h,asn1t.h
-$ EXHEADER_PEM := pem.h,pem2.h
-$ EXHEADER_X509 := x509.h,x509_vfy.h
+$ EXHEADER_ASN1 := asn1.h, asn1_mac.h, asn1t.h
+$ EXHEADER_PEM := pem.h, pem2.h
+$ EXHEADER_X509 := x509.h, x509_vfy.h
$ EXHEADER_X509V3 := x509v3.h
-$ EXHEADER_CONF := conf.h,conf_api.h
+$ EXHEADER_CONF := conf.h, conf_api.h
$ EXHEADER_TXT_DB := txt_db.h
$ EXHEADER_PKCS7 := pkcs7.h
$ EXHEADER_PKCS12 := pkcs12.h
$ EXHEADER_COMP := comp.h
$ EXHEADER_OCSP := ocsp.h
-$ EXHEADER_UI := ui.h,ui_compat.h
+$ EXHEADER_UI := ui.h, ui_compat.h
$ EXHEADER_KRB5 := krb5_asn.h
-$!EXHEADER_STORE := store.h,str_compat.h
-$ EXHEADER_STORE := store.h
$ EXHEADER_CMS := cms.h
$ EXHEADER_PQUEUE := pqueue.h
$ EXHEADER_TS := ts.h
$ EXHEADER_JPAKE := jpake.h
-$
-$ I = 0
-$ LOOP_SDIRS:
-$ D = F$EDIT(F$ELEMENT(I, ",", SDIRS),"TRIM")
-$ I = I + 1
-$ IF D .EQS. "," THEN GOTO LOOP_SDIRS_END
-$ tmp = EXHEADER_'D'
-$ IF D .EQS. ""
-$ THEN
-$ COPY [.CRYPTO]'tmp' SYS$DISK:[.INCLUDE.OPENSSL] !/LOG
-$ ELSE
-$ COPY [.CRYPTO.'D']'tmp' SYS$DISK:[.INCLUDE.OPENSSL] !/LOG
-$ ENDIF
-$ GOTO LOOP_SDIRS
-$ LOOP_SDIRS_END:
+$ EXHEADER_SRP := srp.h
+$!!! EXHEADER_STORE := store.h, str_compat.h
+$ EXHEADER_STORE := store.h
+$ EXHEADER_CMAC := cmac.h
+$!
+$ i = 0
+$ loop_sdirs:
+$ sdir = f$edit( f$element( i, ",", sdirs), "trim")
+$ i = i + 1
+$ if (sdir .eqs. ",") then goto loop_sdirs_end
+$ hdr_list = exheader_'sdir'
+$ if (sdir .nes. "") then sdir = "."+ sdir
+$ copy [.crypto'sdir']'hdr_list' sys$disk:[.include.openssl]
+$ goto loop_sdirs
+$ loop_sdirs_end:
$!
$! Copy All The ".H" Files From The [.SSL] Directory.
$!
-$ EXHEADER := ssl.h,ssl2.h,ssl3.h,ssl23.h,tls1.h,dtls1.h,kssl.h
-$ COPY SYS$DISK:[.SSL]'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL]
+$! (keep these in the same order as ssl/Makefile)
+$ EXHEADER := ssl.h, ssl2.h, ssl3.h, ssl23.h, tls1.h, dtls1.h, kssl.h, srtp.h
+$ copy sys$disk:[.ssl]'exheader' sys$disk:[.include.openssl]
$!
-$! Purge all doubles
+$! Purge the [.include.openssl] header files.
$!
-$ PURGE SYS$DISK:[.INCLUDE.OPENSSL]*.H
+$ purge sys$disk:[.include.openssl]*.h
$!
$! That's All, Time To RETURN.
$!
$ RETURN
$!
-$! Build The "[.xxx.EXE.CRYPTO]LIBCRYPTO''LIB32'.OLB" Library.
+$! Build The "[.xxx.EXE.CRYPTO]SSL_LIBCRYPTO''LIB32'.OLB" Library.
$!
$ CRYPTO:
$!
$! Tell The User What We Are Doing.
$!
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building The [.",ARCH,".EXE.CRYPTO]LIBCRYPTO''LIB32'.OLB Library."
+$ WRITE SYS$OUTPUT -
+ "Building The [.",ARCHD,".EXE.CRYPTO]SSL_LIBCRYPTO''LIB32'.OLB Library."
$!
$! Go To The [.CRYPTO] Directory.
$!
$!
$! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
$!
-$ @CRYPTO-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'"
+$ @CRYPTO-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
+ "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'"
$!
$! Build The [.xxx.EXE.CRYPTO]*.EXE Test Applications.
-$!
-$ @CRYPTO-LIB APPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'"
+$!
+$!!! DISABLED, as these test programs lack any support
+$!!!$ @CRYPTO-LIB APPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
+$!!! "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'"
$!
$! Go Back To The Main Directory.
$!
$!
$ RETURN
$!
-$! Build The "[.xxx.EXE.SSL]LIBSSL''LIB32'.OLB" Library.
+$! Build The "[.xxx.EXE.SSL]SSL_LIBSSL''LIB32'.OLB" Library.
$!
$ SSL:
$!
$! Tell The User What We Are Doing.
$!
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building The [.",ARCH,".EXE.SSL]LIBSSL''LIB32'.OLB Library."
+$ WRITE SYS$OUTPUT -
+ "Building The [.",ARCHD,".EXE.SSL]SSL_LIBSSL''LIB32'.OLB Library."
$!
$! Go To The [.SSL] Directory.
$!
$!
$! Build The [.xxx.EXE.SSL]LIBSSL.OLB Library.
$!
-$ @SSL-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''POINTER_SIZE'"
+$ @SSL-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
+ "''ISSEVEN'" "''POINTER_SIZE'" "''ZLIB'"
$!
$! Go Back To The Main Directory.
$!
$! Tell The User What We Are Doing.
$!
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building DECNet Based SSL Engine, [.",ARCH,".EXE.SSL]SSL_TASK.EXE"
+$ WRITE SYS$OUTPUT -
+ "Building DECNet Based SSL Engine, [.",ARCHD,".EXE.SSL]SSL_TASK.EXE"
$!
$! Go To The [.SSL] Directory.
$!
$!
$! Build The [.xxx.EXE.SSL]SSL_TASK.EXE
$!
-$ @SSL-LIB SSL_TASK 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''POINTER_SIZE'"
+$ @SSL-LIB SSL_TASK 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
+ "''ISSEVEN'" "''POINTER_SIZE'" "''ZLIB'"
$!
$! Go Back To The Main Directory.
$!
$! Tell The User What We Are Doing.
$!
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building The OpenSSL [.",ARCH,".EXE.TEST] Test Utilities."
+$ WRITE SYS$OUTPUT "Building The OpenSSL [.",ARCHD,".EXE.TEST] Test Utilities."
$!
$! Go To The [.TEST] Directory.
$!
$!
$! Build The Test Programs.
$!
-$ @MAKETESTS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''POINTER_SIZE'"
+$ @MAKETESTS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" -
+ "''POINTER_SIZE'" "''ZLIB'"
$!
$! Go Back To The Main Directory.
$!
$! Tell The User What We Are Doing.
$!
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCH,".EXE.APPS] Applications."
+$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCHD,".EXE.APPS] Applications."
$!
$! Go To The [.APPS] Directory.
$!
$!
$! Build The Application Programs.
$!
-$ @MAKEAPPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "" "''POINTER_SIZE'"
+$ @MAKEAPPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" -
+ "" "''POINTER_SIZE'" "''ZLIB'"
$!
$! Go Back To The Main Directory.
$!
$! Tell The User What We Are Doing.
$!
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCH,".EXE.ENGINES] Engines."
+$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCHD,".EXE.ENGINES] Engines."
$!
$! Go To The [.ENGINES] Directory.
$!
$!
$! Build The Application Programs.
$!
-$ @MAKEENGINES ENGINES 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'"
+$ @MAKEENGINES ENGINES 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
+ "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'"
$!
$! Go Back To The Main Directory.
$!
$! Tell The User We Don't Know What They Want.
$!
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "USAGE: @MAKEVMS.COM [Target] [Pointer size] [Debug option] <Compiler>"
+$ WRITE SYS$OUTPUT "USAGE: @MAKEVMS.COM [Target] [Pointer size] [Debug option] <Compiler> <TCP/IP library>"
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Example: @MAKEVMS.COM ALL """" NODEBUG "
+$ WRITE SYS$OUTPUT "Example: @MAKEVMS.COM ALL """" NODEBUG DECC TCPIP"
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT "The Target ",P1," Is Invalid. The Valid Target Options Are:"
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT " Where 'xxx' Stands For:"
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " ALPHA : Alpha Architecture."
-$ WRITE SYS$OUTPUT " IA64 : IA64 Architecture."
+$ WRITE SYS$OUTPUT " ALPHA[64]: Alpha Architecture."
+$ WRITE SYS$OUTPUT " IA64[64] : IA64 Architecture."
$ WRITE SYS$OUTPUT " VAX : VAX Architecture."
$ WRITE SYS$OUTPUT ""
$!
$!
$ ENDIF
$!
-$! Check To See If P2 Is Blank.
+$! Check P2 (POINTER_SIZE).
$!
-$ IF (P2.EQS."")
+$ IF (P2 .NES. "") .AND. (ARCH .NES. "VAX")
$ THEN
-$ POINTER_SIZE = ""
-$ ELSE
-$!
-$! Check is P2 Is Valid
$!
-$ IF (P2.EQS."32")
+$ IF (P2 .EQS. "32")
$ THEN
$ POINTER_SIZE = "32"
-$ IF ARCH .EQS. "VAX"
-$ THEN
-$ LIB32 = ""
-$ ELSE
-$ LIB32 = "32"
-$ ENDIF
$ ELSE
-$ IF (P2.EQS."64")
+$ POINTER_SIZE = F$EDIT( P2, "COLLAPSE, UPCASE")
+$ IF ((POINTER_SIZE .EQS. "64") .OR. -
+ (POINTER_SIZE .EQS. "64=") .OR. -
+ (POINTER_SIZE .EQS. "64=ARGV"))
$ THEN
+$ ARCHD = ARCH+ "_64"
$ LIB32 = ""
-$ IF ARCH .EQS. "VAX"
-$ THEN
-$ POINTER_SIZE = "32"
-$ ELSE
-$ POINTER_SIZE = "64"
-$ ENDIF
$ ELSE
$!
-$! Tell The User Entered An Invalid Option..
+$! Tell The User Entered An Invalid Option.
$!
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P2," Is Invalid. The Valid Options Are:"
+$ WRITE SYS$OUTPUT "The Option ", P2, -
+ " Is Invalid. The Valid Options Are:"
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " 32 : Compile with 32 bit pointer size"
-$ WRITE SYS$OUTPUT " 64 : Compile with 64 bit pointer size"
+$ WRITE SYS$OUTPUT -
+ " """" : Compile with default (short) pointers."
+$ WRITE SYS$OUTPUT -
+ " 32 : Compile with 32-bit (short) pointers."
+$ WRITE SYS$OUTPUT -
+ " 64 : Compile with 64-bit (long) pointers (auto ARGV)."
+$ WRITE SYS$OUTPUT -
+ " 64= : Compile with 64-bit (long) pointers (no ARGV)."
+$ WRITE SYS$OUTPUT -
+ " 64=ARGV : Compile with 64-bit (long) pointers (ARGV)."
$ WRITE SYS$OUTPUT ""
-$!
+$!
$! Time To EXIT.
$!
$ GOTO TIDY
$!
-$! End The Valid Arguement Check.
-$!
$ ENDIF
+$!
$ ENDIF
$!
-$! End The P2 Check.
+$! End The P2 (POINTER_SIZE) Check.
$!
$ ENDIF
$!
$!
$ ELSE
$!
-$! Tell The User Entered An Invalid Option..
+$! Tell The User Entered An Invalid Option.
$!
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT "The Option ",P3," Is Invalid. The Valid Options Are:"
$!
$ ELSE
$!
-$! Check To See If The User Entered A Valid Paramter.
+$! Check To See If The User Entered A Valid Parameter.
$!
$ IF (P4.EQS."VAXC").OR.(P4.EQS."DECC").OR.(P4.EQS."GNUC")!.OR.(P4.EQS."LINK")
$ THEN
$!
$ ENDIF
$!
-$! Time to check the contents of P5, and to make sure we get the correct library.
+$! Time to check the contents of P5, and to make sure we get the correct
+$! library.
$!
$ IF P5.EQS."SOCKETSHR" .OR. P5.EQS."MULTINET" .OR. P5.EQS."UCX" -
.OR. P5.EQS."TCPIP" .OR. P5.EQS."NONE"
$!
$! Set the library to use SOCKETSHR
$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT /OPTIONS"
$!
$! Tell the user
$!
$!
$! Set the library to use UCX.
$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT /OPTIONS"
$!
$! Tell the user
$!
$!
$! Set the library to use TCPIP (post UCX).
$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT /OPTIONS"
$!
$! Tell the user
$!
$!
$ ENDIF
$!
+$!
+$! Check To See If We Have A ZLIB Option.
+$!
+$ ZLIB = P7
+$ IF (ZLIB .NES. "")
+$ THEN
+$!
+$! Check for expected ZLIB files.
+$!
+$ err = 0
+$ file1 = f$parse( "zlib.h", ZLIB, , , "SYNTAX_ONLY")
+$ if (f$search( file1) .eqs. "")
+$ then
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
+$ WRITE SYS$OUTPUT " Can't find header: ''file1'"
+$ err = 1
+$ endif
+$!
+$ file2 = f$parse( ZLIB, "libz.olb", , , "SYNTAX_ONLY")
+$ if (f$search( file2) .eqs. "")
+$ then
+$ if (err .eq. 0)
+$ then
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
+$ endif
+$ WRITE SYS$OUTPUT " Can't find library: ''file2'"
+$ WRITE SYS$OUTPUT ""
+$ err = err+ 2
+$ endif
+$ if (err .eq. 1)
+$ then
+$ WRITE SYS$OUTPUT ""
+$ endif
+$!
+$ if (err .ne. 0)
+$ then
+$ GOTO TIDY
+$ endif
+$!
+$! Print info
+$!
+$ WRITE SYS$OUTPUT "ZLIB library spec: ", file2
+$!
+$! End The ZLIB Check.
+$!
+$ ENDIF
+$!
$! Time To RETURN...
$!
$ RETURN
$!
$ TIDY:
+$!
+$! Close any open files.
+$!
+$ if (f$trnlnm( "h_file", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
+ close h_file
+$!
+$! Restore the original default device:[directory].
+$!
$ SET DEFAULT 'DEF_ORIG'
+$!
$ EXIT
$!
projects / openssl.git / blobdiff