$! Changes by Richard Levitte <richard@levitte.org>
$!
$! This procedure creates the SSL libraries of "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB"
-$! "[.xxx.EXE.SSL]LIBSSL.OLB" and if specified "[.xxx.EXE.RSAREF]LIBRSAGLUE.OLB".
-$! The "xxx" denotes the machine architecture of AXP or VAX.
+$! "[.xxx.EXE.SSL]LIBSSL.OLB"
+$! The "xxx" denotes the machine architecture of ALPHA, IA64 or VAX.
$!
$! This procedures accepts two command line options listed below.
$!
$! Specify one of the following build options for P1.
$!
$! ALL Just build "everything".
-$! CONFIG Just build the "[.CRYPTO]OPENSSLCONF.H" file.
-$! BUILDINF Just build the "[.CRYPTO]BUILDINF.H" file.
+$! CONFIG Just build the "[.CRYPTO.<ARCH>]OPENSSLCONF.H" file.
+$! BUILDINF Just build the "[.CRYPTO.<ARCH>]BUILDINF.H" file.
$! SOFTLINKS Just fix the Unix soft links.
$! BUILDALL Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done.
-$! RSAREF Just build the "[.xxx.EXE.RSAREF]LIBRSAGLUE.OLB" library.
$! CRYPTO Just build the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.
$! CRYPTO/x Just build the x part of the
$! "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.
$! SSL_TASK Just build the "[.xxx.EXE.SSL]SSL_TASK.EXE" program.
$! TEST Just build the "[.xxx.EXE.TEST]" test programs for OpenSSL.
$! APPS Just build the "[.xxx.EXE.APPS]" application programs for OpenSSL.
+$! ENGINES Just build the "[.xxx.EXE.ENGINES]" application programs for OpenSSL.
$!
$!
-$! Specify RSAREF as P2 to compile using the RSAREF Library.
-$! If you specify NORSAREF, it will compile without using RSAREF.
-$! (If in the United States, You Must Compile Using RSAREF).
-$!
-$! Note: The RSAREF libraries are NOT INCLUDED and you have to
-$! download it from "ftp://ftp.rsa.com/rsaref". You have to
-$! get the ".tar-Z" file as the ".zip" file dosen't have the
-$! directory structure stored. You have to extract the file
-$! into the [.RSAREF] directory as that is where the scripts
-$! will look for the files.
+$! P2 is ignored (it was used to denote if RSAref should be used or not,
+$! and is simply kept so surrounding scripts don't get confused)
$!
$! Speficy DEBUG or NODEBUG as P3 to compile with or without debugging
$! information.
$! P6, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
$!
$!
+$ DEF_ORIG = F$ENVIRONMENT( "DEFAULT")
+$ ON ERROR THEN GOTO TIDY
+$ ON CONTROL_C THEN GOTO TIDY
+$!
$! Check if we're in a batch job, and make sure we get to
$! the directory this script is in
$!
$ SET DEF 'COMPATH'
$ ENDIF
$!
-$! Check Which Architecture We Are Using.
+$! Check What Architecture We Are Using.
$!
-$ IF (F$GETSYI("CPU").GE.128)
+$ IF (F$GETSYI("CPU").LT.128)
$ THEN
$!
-$! The Architecture Is AXP.
+$! The Architecture Is VAX.
$!
-$ ARCH := AXP
+$ ARCH := VAX
$!
$! Else...
$!
$ ELSE
$!
-$! The Architecture Is VAX.
+$! The Architecture Is Alpha, IA64 or whatever comes in the future.
$!
-$ ARCH := VAX
+$ ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
+$ IF (ARCH .EQS. "") THEN ARCH = "UNK"
$!
$! End The Architecture Check.
$!
$ IF (BUILDCOMMAND.EQS."ALL".OR.BUILDCOMMAND.EQS."BUILDALL")
$ THEN
$!
-$! Check To See If We Are Going To Be Building The
-$! [.xxx.EXE.RSAREF]LIBRSAGLUE.OLB Library.
-$!
-$ IF (RSAREF.EQS."RSAREF")
-$ THEN
-$!
-$! Build The [.xxx.EXE.RSAREF]LIBRSAGLUE.OLB Library.
-$!
-$ GOSUB RSAREF
-$!
-$! End The RSAREF Check.
-$!
-$ ENDIF
-$!
$! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
$!
$ GOSUB CRYPTO
$!
$ GOSUB APPS
$!
+$! Build The [.xxx.EXE.ENGINES] OpenSSL Shareable Engines.
+$!
+$ GOSUB ENGINES
+$!
$! Else...
$!
$ ELSE
$!
$! Time To EXIT.
$!
-$ EXIT
+$ GOTO TIDY
$!
-$! Rebuild The "[.CRYPTO]OPENSSLCONF.H" file.
+$! Rebuild The "[.CRYPTO.''ARCH']OPENSSLCONF.H" file.
$!
$ CONFIG:
$!
-$! Tell The User We Are Creating The [.CRYPTO]OPENSSLCONF.H File.
+$! Tell The User We Are Creating The [.CRYPTO.<ARCH>]OPENSSLCONF.H File.
+$!
+$ WRITE SYS$OUTPUT "Creating [.CRYPTO.''ARCH']OPENSSLCONF.H Include File."
$!
-$ WRITE SYS$OUTPUT "Creating [.CRYPTO]OPENSSLCONF.H Include File."
+$! First, make sure the directory exists.
$!
-$! Create The [.CRYPTO]OPENSSLCONF.H File.
+$ IF F$PARSE("SYS$DISK:[.CRYPTO.''ARCH']") .EQS. "" THEN -
+ CREATE/DIRECTORY SYS$DISK:[.CRYPTO.'ARCH']
$!
-$ OPEN/WRITE H_FILE SYS$DISK:[.CRYPTO]OPENSSLCONF.H
+$! Create The [.CRYPTO.<ARCH>]OPENSSLCONF.H File.
+$! Make sure it has the right format.
$!
-$! Write The [.CRYPTO]OPENSSLCONF.H File.
+$ OSCH_NAME = "SYS$DISK:[.CRYPTO.''ARCH']OPENSSLCONF.H"
+$ CREATE /FDL=SYS$INPUT: 'OSCH_NAME'
+RECORD
+ FORMAT stream_lf
+$ OPEN /APPEND H_FILE 'OSCH_NAME'
+$!
+$! Write The [.CRYPTO.<ARCH>]OPENSSLCONF.H File.
$!
$ WRITE H_FILE "/* This file was automatically built using makevms.com */"
-$ WRITE H_FILE "/* and [.CRYPTO]OPENSSLCONF.H_IN */"
-$
+$ WRITE H_FILE "/* and [.CRYPTO.''ARCH']OPENSSLCONF.H_IN */"
$!
$! Write a few macros that indicate how this system was built.
$!
$ WRITE H_FILE "#ifndef OPENSSL_SYS_VMS"
$ WRITE H_FILE "# define OPENSSL_SYS_VMS"
$ WRITE H_FILE "#endif"
-$ CONFIG_LOGICALS := NO_ASM,NO_RSA,NO_DSA,NO_DH,NO_MD2,NO_MD5,NO_RIPEMD,-
+$ CONFIG_LOGICALS := NO_ASM,NO_RSA,NO_DSA,NO_DH,NO_MD2,NO_MD5,NO_RIPEMD,WHRLPOOL,-
NO_SHA,NO_SHA0,NO_SHA1,NO_DES/NO_MDC2;NO_MDC2,NO_RC2,NO_RC4,NO_RC5,-
- NO_IDEA,NO_BF,NO_CAST,NO_HMAC,NO_SSL2
+ NO_IDEA,NO_BF,NO_CAST,NO_CAMELLIA,NO_SEED,NO_HMAC,NO_SSL2
$ CONFIG_LOG_I = 0
$ CONFIG_LOG_LOOP:
$ CONFIG_LOG_E1 = F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS)
$ ENDIF
$ GOTO CONFIG_LOG_LOOP
$ CONFIG_LOG_LOOP_END:
+$ WRITE H_FILE "#ifndef OPENSSL_NO_STATIC_ENGINE"
+$ WRITE H_FILE "# define OPENSSL_NO_STATIC_ENGINE"
+$ WRITE H_FILE "#endif"
$ WRITE H_FILE "#ifndef OPENSSL_THREADS"
$ WRITE H_FILE "# define OPENSSL_THREADS"
$ WRITE H_FILE "#endif"
$ TYPE [.CRYPTO]OPENSSLCONF.H.IN /OUTPUT=H_FILE:
$ ELSE
$ WRITE SYS$ERROR "Couldn't find a [.CRYPTO]OPENSSLCONF.H_IN. Exiting!"
-$ EXIT 0
+$ $STATUS = %X00018294 ! "%RMS-F-FNF, file not found".
+$ GOTO TIDY
$ ENDIF
$ ENDIF
$ ENDIF
$ WRITE H_FILE "#endif"
$!
$ WRITE H_FILE "#if defined(HEADER_BN_H)"
+$ WRITE H_FILE "#undef BN_LLONG" ! Never define with SIXTY_FOUR_BIT
$ WRITE H_FILE "#undef SIXTY_FOUR_BIT_LONG"
$ WRITE H_FILE "#undef SIXTY_FOUR_BIT"
$ WRITE H_FILE "#define SIXTY_FOUR_BIT"
$ WRITE H_FILE "#endif"
$!
$ WRITE H_FILE "#if defined(HEADER_BN_H)"
+$ WRITE H_FILE "#undef BN_LLONG" ! VAX C/DEC C doesn't have long long
$ WRITE H_FILE "#undef SIXTY_FOUR_BIT_LONG"
$ WRITE H_FILE "#undef SIXTY_FOUR_BIT"
$ WRITE H_FILE "#undef THIRTY_TWO_BIT"
$ WRITE H_FILE "#undef SIXTEEN_BIT"
$ WRITE H_FILE "#undef EIGHT_BIT"
$ WRITE H_FILE "#endif"
-$
+$!
+$! Oddly enough, the following symbol is tested in crypto/sha/sha512.c
+$! before sha.h gets included (and HEADER_SHA_H defined), so we will not
+$! protect this one...
+$ WRITE H_FILE "#undef OPENSSL_NO_SHA512"
+$ WRITE H_FILE "#define OPENSSL_NO_SHA512"
+$!
$ WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION"
$ WRITE H_FILE "#define OPENSSL_EXPORT_VAR_AS_FUNCTION"
$!
$!
$ ENDIF
$!
-$! Close the [.CRYPTO]OPENSSLCONF.H file
+$! Close the [.CRYPTO.<ARCH>]OPENSSLCONF.H file
$!
$ CLOSE H_FILE
$!
+$! Purge The [.CRYPTO.<ARCH>]OPENSSLCONF.H file
+$!
+$ PURGE SYS$DISK:[.CRYPTO.'ARCH']OPENSSLCONF.H
+$!
$! That's All, Time To RETURN.
$!
$ RETURN
$!
-$! Rebuild The "[.CRYPTO]BUILDINF.H" file.
+$! Rebuild The "[.CRYPTO.<ARCH>]BUILDINF.H" file.
$!
$ BUILDINF:
$!
-$! Tell The User We Are Creating The [.CRYPTO]BUILDINF.H File.
+$! Tell The User We Are Creating The [.CRYPTO.<ARCH>]BUILDINF.H File.
+$!
+$ WRITE SYS$OUTPUT "Creating [.CRYPTO.''ARCH']BUILDINF.H Include File."
$!
-$ WRITE SYS$OUTPUT "Creating [.CRYPTO]BUILDINF.H Include File."
+$! Create The [.CRYPTO.<ARCH>]BUILDINF.H File.
$!
-$! Create The [.CRYPTO]BUILDINF.H File.
+$ BIH_NAME = "SYS$DISK:[.CRYPTO.''ARCH']BUILDINF.H"
+$ CREATE /FDL=SYS$INPUT: 'BIH_NAME'
+RECORD
+ FORMAT stream_lf
$!
-$ OPEN/WRITE H_FILE SYS$DISK:[.CRYPTO]BUILDINF.H
+$ OPEN /APPEND H_FILE 'bih_name'
$!
$! Get The Current Date & Time.
$!
$ TIME = F$TIME()
$!
-$! Write The [.CRYPTO]BUILDINF.H File.
+$! Write The [.CRYPTO.<ARCH>]BUILDINF.H File.
$!
$ WRITE H_FILE "#define CFLAGS """" /* Not filled in for now */"
-$ WRITE H_FILE "#define PLATFORM ""VMS"""
+$ WRITE H_FILE "#define PLATFORM ""VMS ''ARCH' ''VMS_VER'"""
$ WRITE H_FILE "#define DATE ""''TIME'"" "
$!
-$! Close The [.CRYPTO]BUILDINF.H File.
+$! Close The [.CRYPTO.<ARCH>]BUILDINF.H File.
$!
$ CLOSE H_FILE
$!
+$! Purge The [.CRYPTO.<ARCH>]BUILDINF.H File.
+$!
+$ PURGE SYS$DISK:[.CRYPTO.'ARCH']BUILDINF.H
+$!
$! That's All, Time To RETURN.
$!
$ RETURN
$!
$ SOFTLINKS:
$!
-$! Tell The User We Are Partly Rebuilding The [.TEST] Directory.
+$! Tell The User We Are Partly Rebuilding The [.APPS] Directory.
$!
$ WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD4.C', '[.APPS]MD5.C' And '[.APPS]RMD160.C' Files."
$!
$! Copy all the *TEST.C files from [.CRYPTO...] into [.TEST]
$!
$ COPY SYS$DISK:[.CRYPTO.*]%*TEST.C SYS$DISK:[.TEST]
+$ COPY SYS$DISK:[.CRYPTO.SHA]SHA%%%T.C SYS$DISK:[.TEST]
$ COPY SYS$DISK:[.CRYPTO.EVP]EVPTESTS.TXT SYS$DISK:[.TEST]
$!
$! Copy all the *TEST.C files from [.SSL...] into [.TEST]
$!
$! Copy All The ".H" Files From The [.CRYPTO] Directory Tree.
$!
-$ SDIRS := ,MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,-
- DES,RC2,RC4,RC5,IDEA,BF,CAST,-
- BN,EC,RSA,DSA,ECDSA,DH,DSO,ENGINE,AES,-
- BUFFER,BIO,STACK,LHASH,RAND,ERR,OBJECTS,-
- EVP,ASN1,PEM,X509,X509V3,CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5
-$ EXHEADER_ := crypto.h,tmdiff.h,opensslv.h,opensslconf.h,ebcdic.h,symhacks.h,-
- ossl_typ.h
+$ SDIRS := ,-
+ 'ARCH',-
+ OBJECTS,-
+ MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,WHRLPOOL,-
+ DES,AES,RC2,RC4,RC5,IDEA,BF,CAST,CAMELLIA,SEED,MODES,-
+ BN,EC,RSA,DSA,ECDSA,DH,ECDH,DSO,ENGINE,-
+ BUFFER,BIO,STACK,LHASH,RAND,ERR,-
+ EVP,ASN1,PEM,X509,X509V3,CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5,-
+ STORE,CMS,PQUEUE,TS,JPAKE
+$ EXHEADER_ := crypto.h,opensslv.h,ebcdic.h,symhacks.h,ossl_typ.h
+$ EXHEADER_'ARCH' := opensslconf.h
+$ EXHEADER_OBJECTS := objects.h,obj_mac.h
$ EXHEADER_MD2 := md2.h
$ EXHEADER_MD4 := md4.h
$ EXHEADER_MD5 := md5.h
$ EXHEADER_MDC2 := mdc2.h
$ EXHEADER_HMAC := hmac.h
$ EXHEADER_RIPEMD := ripemd.h
+$ EXHEADER_WHRLPOOL := whrlpool.h
$ EXHEADER_DES := des.h,des_old.h
+$ EXHEADER_AES := aes.h
$ EXHEADER_RC2 := rc2.h
$ EXHEADER_RC4 := rc4.h
$ EXHEADER_RC5 := rc5.h
$ EXHEADER_IDEA := idea.h
$ EXHEADER_BF := blowfish.h
$ EXHEADER_CAST := cast.h
+$ EXHEADER_CAMELLIA := camellia.h
+$ EXHEADER_SEED := seed.h
+$ EXHEADER_MODES := modes.h
$ EXHEADER_BN := bn.h
$ EXHEADER_EC := ec.h
$ EXHEADER_RSA := rsa.h
$ EXHEADER_DSA := dsa.h
$ EXHEADER_ECDSA := ecdsa.h
$ EXHEADER_DH := dh.h
+$ EXHEADER_ECDH := ecdh.h
$ EXHEADER_DSO := dso.h
$ EXHEADER_ENGINE := engine.h
-$ EXHEADER_AES := aes.h
$ EXHEADER_BUFFER := buffer.h
$ EXHEADER_BIO := bio.h
$ EXHEADER_STACK := stack.h,safestack.h
$ EXHEADER_LHASH := lhash.h
$ EXHEADER_RAND := rand.h
$ EXHEADER_ERR := err.h
-$ EXHEADER_OBJECTS := objects.h,obj_mac.h
$ EXHEADER_EVP := evp.h
$ EXHEADER_ASN1 := asn1.h,asn1_mac.h,asn1t.h
$ EXHEADER_PEM := pem.h,pem2.h
$ EXHEADER_OCSP := ocsp.h
$ EXHEADER_UI := ui.h,ui_compat.h
$ EXHEADER_KRB5 := krb5_asn.h
+$!EXHEADER_STORE := store.h,str_compat.h
+$ EXHEADER_STORE := store.h
+$ EXHEADER_CMS := cms.h
+$ EXHEADER_PQUEUE := pqueue.h
+$ EXHEADER_TS := ts.h
+$ EXHEADER_JPAKE := jpake.h
$
$ I = 0
$ LOOP_SDIRS:
$ GOTO LOOP_SDIRS
$ LOOP_SDIRS_END:
$!
-$! Copy All The ".H" Files From The [.RSAREF] Directory.
-$!
-$! EXHEADER := rsaref.h
-$! COPY SYS$DISK:[.RSAREF]'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL]
-$!
$! Copy All The ".H" Files From The [.SSL] Directory.
$!
-$ EXHEADER := ssl.h,ssl2.h,ssl3.h,ssl23.h,tls1.h,kssl.h
+$ EXHEADER := ssl.h,ssl2.h,ssl3.h,ssl23.h,tls1.h,dtls1.h,kssl.h
$ COPY SYS$DISK:[.SSL]'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL]
$!
$! Purge all doubles
$!
$! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
$!
-$ @CRYPTO-LIB LIBRARY 'RSAREF' 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'"
+$ @CRYPTO-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'"
$!
$! Build The [.xxx.EXE.CRYPTO]*.EXE Test Applications.
$!
-$ @CRYPTO-LIB APPS 'RSAREF' 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
+$ @CRYPTO-LIB APPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN' "''BUILDPART'"
$!
$! Go Back To The Main Directory.
$!
$!
$ RETURN
$!
-$! Build The [.xxx.EXE.RSAREF]LIBRSAGLUE Library.
-$!
-$ RSAREF:
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "RSAref glue library not built, since it's no longer needed"
-$ RETURN
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building The [.",ARCH,".EXE.RSAREF]LIBRSAGLUE.OLB Library."
-$!
-$! Go To The [.RSAREF] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.RSAREF]
-$!
-$! Build The [.xxx.EXE.RSAREF]LIBRSAGLUE.OLB Library.
-$!
-$ @RSAREF-LIB LIBRARY 'DEBUGGER' "''COMPILER'" 'ISSEVEN'
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! Time To Return.
-$!
-$ RETURN
-$!
$! Build The "[.xxx.EXE.SSL]LIBSSL.OLB" Library.
$!
$ SSL:
$!
$! Build The [.xxx.EXE.SSL]LIBSSL.OLB Library.
$!
-$ @SSL-LIB LIBRARY 'RSAREF' 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
+$ @SSL-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
$!
$! Go Back To The Main Directory.
$!
$!
$! Build The [.xxx.EXE.SSL]SSL_TASK.EXE
$!
-$ @SSL-LIB SSL_TASK 'RSAREF' 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
+$ @SSL-LIB SSL_TASK 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
$!
$! Go Back To The Main Directory.
$!
$!
$! Build The Test Programs.
$!
-$ @MAKETESTS 'RSAREF' 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
+$ @MAKETESTS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
$!
$! Go Back To The Main Directory.
$!
$!
$! Build The Application Programs.
$!
-$ @MAKEAPPS 'RSAREF' 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
+$ @MAKEAPPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
+$!
+$! Go Back To The Main Directory.
+$!
+$ SET DEFAULT [-]
+$!
+$! That's All, Time To RETURN.
+$!
+$ RETURN
+$!
+$! Build The OpenSSL Application Programs.
+$!
+$ ENGINES:
+$!
+$! Tell The User What We Are Doing.
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCH,".EXE.ENGINES] Engines."
+$!
+$! Go To The [.ENGINES] Directory.
+$!
+$ SET DEFAULT SYS$DISK:[.ENGINES]
+$!
+$! Build The Application Programs.
+$!
+$ @MAKEENGINES ENGINES 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN' "''BUILDPART'"
$!
$! Go Back To The Main Directory.
$!
$!
$ IF (P1.EQS."CONFIG").OR.(P1.EQS."BUILDINF").OR.(P1.EQS."SOFTLINKS") -
.OR.(P1.EQS."BUILDALL") -
- .OR.(P1.EQS."CRYPTO").OR.(P1.EQS."SSL").OR.(P1.EQS."RSAREF") -
+ .OR.(P1.EQS."CRYPTO").OR.(P1.EQS."SSL") -
.OR.(P1.EQS."SSL_TASK").OR.(P1.EQS."TEST").OR.(P1.EQS."APPS")
$ THEN
$!
$ WRITE SYS$OUTPUT "The Option ",P1," Is Invalid. The Valid Options Are:"
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT " ALL : Just Build Everything."
-$ WRITE SYS$OUTPUT " CONFIG : Just build the [.CRYPTO]OPENSSLCONF.H file."
-$ WRITE SYS$OUTPUT " BUILDINF : Just build the [.CRYPTO]BUILDINF.H file."
+$ WRITE SYS$OUTPUT " CONFIG : Just build the [.CRYPTO.''ARCH']OPENSSLCONF.H file."
+$ WRITE SYS$OUTPUT " BUILDINF : Just build the [.CRYPTO.''ARCH']BUILDINF.H file."
$ WRITE SYS$OUTPUT " SOFTLINKS: Just Fix The Unix soft links."
$ WRITE SYS$OUTPUT " BUILDALL : Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done."
$ WRITE SYS$OUTPUT " CRYPTO : To Build Just The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library."
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT " Where 'xxx' Stands For:"
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " AXP : Alpha Architecture."
-$ WRITE SYS$OUTPUT " VAX : VAX Architecture."
+$ WRITE SYS$OUTPUT " ALPHA : Alpha Architecture."
+$ WRITE SYS$OUTPUT " IA64 : IA64 Architecture."
+$ WRITE SYS$OUTPUT " VAX : VAX Architecture."
$ WRITE SYS$OUTPUT ""
$!
$! Time To EXIT.
$!
-$ EXIT
+$ GOTO TIDY
$!
$! End The Valid Argument Check.
$!
$!
$ ENDIF
$!
-$! Check To See If P2 Is Blank.
-$!
-$ P2 = "NORSAREF"
-$ IF (P2.EQS."NORSAREF")
-$ THEN
-$!
-$! P2 Is NORSAREF, So Compile Without RSAREF.
-$!
-$ RSAREF = "NORSAREF"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Check To See If We Are To Compile Using The RSAREF Library.
-$!
-$ IF (P2.EQS."RSAREF")
-$ THEN
-$!
-$! Compile With RSAREF Library.
-$!
-$ RSAREF = "RSAREF"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Tell The User Entered An Invalid Option..
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P2," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " RSAREF : To Compile With The RSAREF Library."
-$ WRITE SYS$OUTPUT " NORSAREF : To Compile With The Regular RSA Library."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ EXIT
-$!
-$! End The Valid Arguemnt Check.
-$!
-$ ENDIF
-$!
-$! End The P2 Check.
-$!
-$ ENDIF
-$!
$! Check To See If P3 Is Blank.
$!
$ IF (P3.EQS."NODEBUG")
$!
$! Time To EXIT.
$!
-$ EXIT
+$ GOTO TIDY
$!
$! End The Valid Arguement Check.
$!
$!
$! Time To EXIT.
$!
-$ EXIT
+$ GOTO TIDY
$!
$! End The Valid Arguement Check.
$!
$!
$! Time To EXIT.
$!
-$ EXIT
+$ GOTO TIDY
$ ELSE
$!
$! If TCPIP is not defined, then hardcode it to make
$! Time To RETURN...
$!
$ RETURN
+$!
+$ TIDY:
+$ SET DEFAULT 'DEF_ORIG'
+$ EXIT
+$!
projects / openssl.git / blobdiff