$! CRYPTO/x Just build the x part of the
$! "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.
$! SSL Just build the "[.xxx.EXE.SSL]LIBSSL.OLB" library.
-$! SSL_TASK Just build the "[.xxx.EXE.SSL]SSL_TASK.EXE" program.
$! TEST Just build the "[.xxx.EXE.TEST]" test programs for OpenSSL.
$! APPS Just build the "[.xxx.EXE.APPS]" application programs for OpenSSL.
$! ENGINES Just build the "[.xxx.EXE.ENGINES]" application programs for OpenSSL.
$!
$ GOSUB SSL
$!
-$! Build The [.xxx.EXE.SSL]SSL_TASK.EXE DECNet SSL Engine.
-$!
-$ GOSUB SSL_TASK
-$!
$! Build The [.xxx.EXE.TEST] OpenSSL Test Utilities.
$!
$ GOSUB TEST
$ WRITE H_FILE "# define OPENSSL_SYS_VMS"
$ WRITE H_FILE "#endif"
$
+$!
+$! Defined the full SDIRS here. It will be pruned depending on configuration.
+$! This is an exact copy of what's found in Makefile.org, with spaces replaced
+$! with commas.
+$!
+$ SDIRS := -
+ objects,-
+ md2,md4,md5,sha,mdc2,hmac,ripemd,whrlpool,-
+ des,aes,rc2,rc4,rc5,idea,bf,cast,camellia,seed,modes,-
+ bn,ec,rsa,dsa,ecdsa,dh,ecdh,dso,engine,-
+ buffer,bio,stack,lhash,rand,err,-
+ evp,asn1,pem,x509,x509v3,conf,txt_db,pkcs7,pkcs12,comp,ocsp,ui,-
+ cms,pqueue,ts,jpake,srp,store,cmac
+$
$! One of the best way to figure out what the list should be is to do
$! the following on a Unix system:
-$! grep OPENSSL_NO_ crypto/*/*.h ssl/*.h engines/*.h engines/*/*.h|grep ':# *if'|sed -e 's/^.*def //'|sort|uniq
+$! grep OPENSSL_NO_ crypto/include/internal/*.h crypto/*/*.h ssl/*.h engines/*.h engines/*/*.h|grep ':# *if'|sed -e 's/^.*def //'|sort|uniq
$! For that reason, the list will also always end up in alphabetical order
$ CONFIG_LOGICALS := AES,-
ASM,INLINE_ASM,-
EC_NISTP_64_GCC_128,-
ENGINE,-
ERR,-
- EVP,-
- FP_API,-
GMP,-
GOST,-
- HASH_COMP,-
+ HEARTBEATS,-
HMAC,-
IDEA,-
JPAKE,-
- KRB5,-
- LHASH,-
MD2,-
MD4,-
MD5,-
MDC2,-
NEXTPROTONEG,-
+ OCB,-
OCSP,-
PSK,-
RC2,-
RC4,-
RC5,-
- RIPEMD,-
+ RMD160,-
RSA,-
+ SCTP,-
SEED,-
- SHA,-
- SHA0,-
- SHA1,-
- SHA256,-
- SHA512,-
SOCK,-
SRP,-
- SSL_INTERN,-
- STACK,-
+ SRTP,-
+ SSL3_METHOD,-
+ SSL_TRACE,-
STATIC_ENGINE,-
STDIO,-
STORE,-
TLSEXT,-
+ UNIT_TEST,-
WHIRLPOOL
-$! Add a few that we know about
-$ CONFIG_LOGICALS := 'CONFIG_LOGICALS',-
- THREADS
+$ CONFIG_EXPERIMENTAL := JPAKE,-
+ STORE
$! The following rules, which dictate how some algorithm choices affect
$! others, are picked from Configure.
$! Quick syntax:
$! To force something to be enabled or disabled, have no algorithms in the
$! algos part.
$ CONFIG_DISABLE_RULES := RIJNDAEL/AES;-
+ RMD160/RIPEMD;-
DES/MDC2;-
EC/ECDSA,ECDH;-
MD5/SSL3,TLS1;-
SHA/SSL3,TLS1;-
+ RSA,DSA/SSL3,TLS1;-
DH/SSL3,TLS1;-
TLS1/TLSEXT;-
EC/GOST;-
DSA/GOST;-
DH/GOST;-
+ TLSEXT/SRP,HEARTBEAT;-
/STATIC_ENGINE;-
- /KRB5;-
- /EC_NISTP_64_GCC_128
+ /DEPRECATED;-
+ /EC_NISTP_64_GCC_128;-
+ /GMP;-
+ /MD2;-
+ /RC5;-
+ /RFC3779;-
+ /SCTP;-
+ /SSL_TRACE;-
+ /UNIT_TEST
$ CONFIG_ENABLE_RULES := ZLIB_DYNAMIC/ZLIB;-
/THREADS
$
";/WHIRLPOOL"
$ ENDIF
$
+$! Keep track of things to remove from SDIRS, have the items surrounded
+$! with commas
+$ SKIP_SDIRS = ","
+$
$ CONFIG_LOG_I = 0
-$ CONFIG_LOG_LOOP1:
+$ CONFIG_LOG_LOOP11:
$ CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM")
$ CONFIG_LOG_I = CONFIG_LOG_I + 1
-$ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP1
-$ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP1_END
+$ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP11
+$ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP11_END
$ IF F$TRNLNM("OPENSSL_NO_"+CONFIG_LOG_E)
$ THEN
$ CONFIG_DISABLED_'CONFIG_LOG_E' := YES
$ CONFIG_ENABLED_'CONFIG_LOG_E' := NO
$ CONFIG_CHANGED_'CONFIG_LOG_E' := YES
+$ IF (SKIP_SDIRS - (","+CONFIG_LOG_E+",")) .EQS. SKIP_SDIRS THEN -
+ SKIP_SDIRS = SKIP_SDIRS + CONFIG_LOG_E + ","
$ ELSE
$ CONFIG_DISABLED_'CONFIG_LOG_E' := NO
$ CONFIG_ENABLED_'CONFIG_LOG_E' := YES
-$ ! Because all algorithms are assumed enabled by default
+$ ! Because all non-experimental algorithms are assumed
+$ ! enabled by default
+$ CONFIG_CHANGED_'CONFIG_LOG_E' := NO
+$ IF (SKIP_SDIRS - (","+CONFIG_LOG_E+",")) .NES. SKIP_SDIRS THEN -
+ SKIP_SDIRS = SKIP_SDIRS - (CONFIG_LOG_E + ",")
+$ ENDIF
+$ GOTO CONFIG_LOG_LOOP11
+$ CONFIG_LOG_LOOP11_END:
+$
+$ CONFIG_LOG_I = 0
+$ CONFIG_LOG_LOOP12:
+$ CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_EXPERIMENTAL),"TRIM")
+$ CONFIG_LOG_I = CONFIG_LOG_I + 1
+$ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP12
+$ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP12_END
+$ IF F$TRNLNM("OPENSSL_EXPERIMENTAL_"+CONFIG_LOG_E)
+$ THEN
+$ CONFIG_DISABLED_'CONFIG_LOG_E' := NO
+$ CONFIG_ENABLED_'CONFIG_LOG_E' := YES
+$ CONFIG_CHANGED_'CONFIG_LOG_E' := YES
+$ IF (SKIP_SDIRS - (","+CONFIG_LOG_E+",")) .NES. SKIP_SDIRS THEN -
+ SKIP_SDIRS = SKIP_SDIRS - (CONFIG_LOG_E + ",")
+$ ELSE
+$ CONFIG_DISABLED_'CONFIG_LOG_E' := YES
+$ CONFIG_ENABLED_'CONFIG_LOG_E' := NO
+$ ! Because all experimental algorithms are assumed
+$ ! disabled by default
$ CONFIG_CHANGED_'CONFIG_LOG_E' := NO
+$ IF (SKIP_SDIRS - (","+CONFIG_LOG_E+",")) .EQS. SKIP_SDIRS THEN -
+ SKIP_SDIRS = SKIP_SDIRS + CONFIG_LOG_E + ","
$ ENDIF
-$ GOTO CONFIG_LOG_LOOP1
-$ CONFIG_LOG_LOOP1_END:
+$ GOTO CONFIG_LOG_LOOP12
+$ CONFIG_LOG_LOOP12_END:
$
$! Apply cascading disable rules
$ CONFIG_DISABLE_I = 0
$ CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := NO
$ ! Better not to assume defaults at this point...
$ CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES
+$ IF (SKIP_SDIRS - (","+CONFIG_DEPENDENT_E+",")) .EQS. SKIP_SDIRS THEN -
+ SKIP_SDIRS = SKIP_SDIRS + CONFIG_DEPENDENT_E + ","
$ WRITE SYS$ERROR -
"''CONFIG_DEPENDENT_E' disabled by rule ''CONFIG_DISABLE_E'"
$ GOTO CONFIG_DISABLE_LOOP2
$ CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := YES
$ ! Better not to assume defaults at this point...
$ CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES
+$ IF (SKIP_SDIRS - (","+CONFIG_DEPENDENT_E+",")) .NES. SKIP_SDIRS THEN -
+ SKIP_SDIRS = SKIP_SDIRS - (CONFIG_DEPENDENT_E + ",")
$ WRITE SYS$ERROR -
"''CONFIG_DEPENDENT_E' enabled by rule ''CONFIG_ENABLE_E'"
$ GOTO CONFIG_ENABLE_LOOP2
$ GOTO CONFIG_ENABLE_LOOP0
$ CONFIG_ENABLE_LOOP0_END:
$
+$! Fix SDIRS
+$ SDIRS = ","+F$EDIT(SDIRS,"COLLAPSE")+","
+$ CONFIG_SKIP_I = 0
+$ CONFIG_SDIRS_LOOP1:
+$ CONFIG_SKIP_E = F$EDIT(F$ELEMENT(CONFIG_SKIP_I,",",SKIP_SDIRS),"TRIM")
+$ CONFIG_SKIP_I = CONFIG_SKIP_I + 1
+$ IF CONFIG_SKIP_E .EQS. "" THEN GOTO CONFIG_SDIRS_LOOP1
+$ IF CONFIG_SKIP_E .EQS. "," THEN GOTO CONFIG_SDIRS_LOOP1_END
+$ IF (SDIRS - (","+CONFIG_SKIP_E+",")) .NES. SDIRS THEN -
+ SDIRS = SDIRS - (CONFIG_SKIP_E+",")
+$ GOTO CONFIG_SDIRS_LOOP1
+$ CONFIG_SDIRS_LOOP1_END:
+$
$! Write to the configuration
$ CONFIG_LOG_I = 0
$ CONFIG_LOG_LOOP2:
$ CONFIG_LOG_I = CONFIG_LOG_I + 1
$ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP2
$ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP2_END
-$ IF CONFIG_CHANGED_'CONFIG_LOG_E'
+$ IF CONFIG_DISABLED_'CONFIG_LOG_E'
$ THEN
-$ IF CONFIG_DISABLED_'CONFIG_LOG_E'
+$ WRITE H_FILE "#ifndef OPENSSL_NO_",CONFIG_LOG_E
+$ WRITE H_FILE "# define OPENSSL_NO_",CONFIG_LOG_E
+$ WRITE H_FILE "#endif"
+$ ELSE
+$ IF CONFIG_CHANGED_'CONFIG_LOG_E'
$ THEN
-$ WRITE H_FILE "#ifndef OPENSSL_NO_",CONFIG_LOG_E
-$ WRITE H_FILE "# define OPENSSL_NO_",CONFIG_LOG_E
-$ WRITE H_FILE "#endif"
-$ ELSE
-$ WRITE H_FILE "#ifndef OPENSSL_",CONFIG_LOG_E
-$ WRITE H_FILE "# define OPENSSL_",CONFIG_LOG_E
+$ WRITE H_FILE "#ifndef OPENSSL_EXPERIMENTAL_",CONFIG_LOG_E
+$ WRITE H_FILE "# ifndef OPENSSL_NO_",CONFIG_LOG_E
+$ WRITE H_FILE "# define OPENSSL_NO_",CONFIG_LOG_E
+$ WRITE H_FILE "# endif"
$ WRITE H_FILE "#endif"
+$
+$ IF F$TYPE(USER_CCDEFS) .NES. ""
+$ THEN
+$ USER_CCDEFS = USER_CCDEFS + ",OPENSSL_EXPERIMENTAL_" + CONFIG_LOG_E
+$ ELSE
+$ USER_CCDEFS = "OPENSSL_EXPERIMENTAL_" + CONFIG_LOG_E
+$ ENDIF
$ ENDIF
$ ENDIF
$ GOTO CONFIG_LOG_LOOP2
$ CONFIG_LOG_LOOP2_END:
+$
+$ WRITE/SYMBOL SYS$ERROR "SDIRS = """,SDIRS,""""
$!
$ WRITE H_FILE ""
$ WRITE H_FILE "/* STCP support comes with TCPIP 5.7 ECO 2 "
$ WRITE H_FILE "#undef EIGHT_BIT"
$ WRITE H_FILE "#endif"
$!
-$! Oddly enough, the following symbol is tested in crypto/sha/sha512.c
-$! before sha.h gets included (and HEADER_SHA_H defined), so we will not
-$! protect this one...
-$ WRITE H_FILE "#undef OPENSSL_NO_SHA512"
-$ WRITE H_FILE "#define OPENSSL_NO_SHA512"
-$!
$ WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION"
$ WRITE H_FILE "#define OPENSSL_EXPORT_VAR_AS_FUNCTION"
$!
$!
$! Copy All The ".H" Files From The [.CRYPTO] Directory Tree.
$!
-$ SDIRS := , -
+$ HEADER_SDIRS := , -
'ARCHD', -
OBJECTS, -
MD2, MD4, MD5, SHA, MDC2, HMAC, RIPEMD, WHRLPOOL, -
BN, EC, RSA, DSA, ECDSA, DH, ECDH, DSO, ENGINE, -
BUFFER, BIO, STACK, LHASH, RAND, ERR, -
EVP, ASN1, PEM, X509, X509V3, CONF, TXT_DB, PKCS7, PKCS12, -
- COMP, OCSP, UI, KRB5, -
+ COMP, OCSP, UI, -
CMS, PQUEUE, TS, JPAKE, SRP, STORE, CMAC
$!
$ EXHEADER_ := crypto.h, opensslv.h, ebcdic.h, symhacks.h, ossl_typ.h
$ EXHEADER_HMAC := hmac.h
$ EXHEADER_RIPEMD := ripemd.h
$ EXHEADER_WHRLPOOL := whrlpool.h
-$ EXHEADER_DES := des.h, des_old.h
+$ EXHEADER_DES := des.h
$ EXHEADER_AES := aes.h
$ EXHEADER_RC2 := rc2.h
$ EXHEADER_RC4 := rc4.h
$ EXHEADER_PKCS12 := pkcs12.h
$ EXHEADER_COMP := comp.h
$ EXHEADER_OCSP := ocsp.h
-$ EXHEADER_UI := ui.h, ui_compat.h
-$ EXHEADER_KRB5 := krb5_asn.h
+$ EXHEADER_UI := ui.h
$ EXHEADER_CMS := cms.h
$ EXHEADER_PQUEUE := pqueue.h
$ EXHEADER_TS := ts.h
$ EXHEADER_CMAC := cmac.h
$!
$ i = 0
-$ loop_sdirs:
-$ sdir = f$edit( f$element( i, ",", sdirs), "trim")
+$ loop_header_sdirs:
+$ sdir = f$edit( f$element( i, ",", header_sdirs), "trim")
$ i = i + 1
-$ if (sdir .eqs. ",") then goto loop_sdirs_end
+$ if (sdir .eqs. ",") then goto loop_header_sdirs_end
$ hdr_list = exheader_'sdir'
$ if (sdir .nes. "") then sdir = "."+ sdir
$ copy [.crypto'sdir']'hdr_list' sys$disk:[.include.openssl]
-$ goto loop_sdirs
-$ loop_sdirs_end:
+$ goto loop_header_sdirs
+$ loop_header_sdirs_end:
$!
$! Copy All The ".H" Files From The [.SSL] Directory.
$!
$! (keep these in the same order as ssl/Makefile)
-$ EXHEADER := ssl.h, ssl2.h, ssl3.h, ssl23.h, tls1.h, dtls1.h, kssl.h
+$ EXHEADER := ssl.h, ssl2.h, ssl3.h, ssl23.h, tls1.h, dtls1.h, srtp.h
$ copy sys$disk:[.ssl]'exheader' sys$disk:[.include.openssl]
$!
$! Purge the [.include.openssl] header files.
$ @CRYPTO-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
"''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'"
$!
-$! Build The [.xxx.EXE.CRYPTO]*.EXE Test Applications.
-$!
-$ @CRYPTO-LIB APPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
- "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'"
-$!
$! Go Back To The Main Directory.
$!
$ SET DEFAULT [-]
$!
$ RETURN
$!
-$! Build The "[.xxx.EXE.SSL]SSL_TASK.EXE" Program.
-$!
-$ SSL_TASK:
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT -
- "Building DECNet Based SSL Engine, [.",ARCHD,".EXE.SSL]SSL_TASK.EXE"
-$!
-$! Go To The [.SSL] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.SSL]
-$!
-$! Build The [.xxx.EXE.SSL]SSL_TASK.EXE
-$!
-$ @SSL-LIB SSL_TASK 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
- "''ISSEVEN'" "''POINTER_SIZE'" "''ZLIB'"
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
$! Build The OpenSSL Test Programs.
$!
$ TEST:
$ IF (P1.EQS."CONFIG").OR.(P1.EQS."BUILDINF").OR.(P1.EQS."SOFTLINKS") -
.OR.(P1.EQS."BUILDALL") -
.OR.(P1.EQS."CRYPTO").OR.(P1.EQS."SSL") -
- .OR.(P1.EQS."SSL_TASK").OR.(P1.EQS."TEST").OR.(P1.EQS."APPS") -
+ .OR.(P1.EQS."TEST").OR.(P1.EQS."APPS") -
.OR.(P1.EQS."ENGINES")
$ THEN
$!
$ WRITE SYS$OUTPUT " CRYPTO/x : To Build Just The x Part Of The"
$ WRITE SYS$OUTPUT " [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library."
$ WRITE SYS$OUTPUT " SSL : To Build Just The [.xxx.EXE.SSL]LIBSSL.OLB Library."
-$ WRITE SYS$OUTPUT " SSL_TASK : To Build Just The [.xxx.EXE.SSL]SSL_TASK.EXE Program."
$ WRITE SYS$OUTPUT " TEST : To Build Just The OpenSSL Test Programs."
$ WRITE SYS$OUTPUT " APPS : To Build Just The OpenSSL Application Programs."
$ WRITE SYS$OUTPUT " ENGINES : To Build Just The ENGINES"
projects / openssl.git / blobdiff