Currently supported B<cmd> names for command lines (i.e. when the
flag B<SSL_CONF_CMDLINE> is set) are listed below. Note: all B<cmd> names
-and are case sensitive. Unless otherwise stated commands can be used by
+are case sensitive. Unless otherwise stated commands can be used by
both clients and servers and the B<value> parameter is not used. The default
prefix for command line commands is B<-> and that is reflected below.
=item B<-cert>
Attempts to use the file B<value> as the certificate for the appropriate
-context. It currently uses SSL_CTX_use_cerificate_chain_file if an B<SSL_CTX>
-structure is set or SSL_use_certifcate_file with filetype PEM if an B<SSL>
+context. It currently uses SSL_CTX_use_certificate_chain_file() if an B<SSL_CTX>
+structure is set or SSL_use_certificate_file() with filetype PEM if an B<SSL>
structure is set. This option is only supported if certificate operations
are permitted.
Attempts to use the file B<value> as the private key for the appropriate
context. This option is only supported if certificate operations
are permitted. Note: if no B<-key> option is set then a private key is
-not loaded: it does not currently use the B<-cert> file.
+not loaded unless the flag B<SSL_CONF_FLAG_REQUIRE_PRIVATE> is set.
-=item B<-no_ssl2>, B<-no_ssl3>, B<-no_tls1>, B<-no_tls1_1>, B<-no_tls1_2>
+=item B<-dhparam>
-Disables protocol support for SSLv2, SSLv3, TLS 1.0, TLS 1.1 or TLS 1.2
-by setting the corresponding options B<SSL_OP_NO_SSL2>, B<SSL_OP_NO_SSL3>,
+Attempts to use the file B<value> as the set of temporary DH parameters for
+the appropriate context. This option is only supported if certificate
+operations are permitted.
+
+=item B<-no_ssl3>, B<-no_tls1>, B<-no_tls1_1>, B<-no_tls1_2>
+
+Disables protocol support for SSLv3, TLS 1.0, TLS 1.1 or TLS 1.2
+by setting the corresponding options B<SSL_OP_NO_SSL3>,
B<SSL_OP_NO_TLS1>, B<SSL_OP_NO_TLS1_1> and B<SSL_OP_NO_TLS1_2> respectively.
=item B<-bugs>
signature algorithm or elliptic curve to use for an incoming connection.
Equivalent to B<SSL_OP_CIPHER_SERVER_PREFERENCE>. Only used by servers.
+=item B<-no_resumption_on_reneg>
+
+set SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION flag. Only used by servers.
+
=item B<-legacyrenegotiation>
permits the use of unsafe legacy renegotiation. Equivalent to setting
Currently supported B<cmd> names for configuration files (i.e. when the
flag B<SSL_CONF_FLAG_FILE> is set) are listed below. All configuration file
-B<cmd> names and are case insensitive so B<signaturealgorithms> is recognised
+B<cmd> names are case insensitive so B<signaturealgorithms> is recognised
as well as B<SignatureAlgorithms>. Unless otherwise stated the B<value> names
are also case insensitive.
=item B<Certificate>
Attempts to use the file B<value> as the certificate for the appropriate
-context. It currently uses SSL_CTX_use_cerificate_chain_file if an B<SSL_CTX>
-structure is set or SSL_use_certifcate_file with filetype PEM if an B<SSL>
+context. It currently uses SSL_CTX_use_certificate_chain_file() if an B<SSL_CTX>
+structure is set or SSL_use_certificate_file() with filetype PEM if an B<SSL>
structure is set. This option is only supported if certificate operations
are permitted.
Attempts to use the file B<value> as the private key for the appropriate
context. This option is only supported if certificate operations
-are permitted. Note: if no B<-key> option is set then a private key is
-not loaded: it does not currently use the B<Certificate> file.
+are permitted. Note: if no B<PrivateKey> option is set then a private key is
+not loaded unless the B<SSL_CONF_FLAG_REQUIRE_PRIVATE> is set.
+
+=item B<ChainCAFile>, B<ChainCAPath>, B<VerifyCAFile>, B<VerifyCAPath>
+
+These options indicate a file or directory used for building certificate
+chains or verifying certificate chains. These options are only supported
+if certificate operations are permitted.
+
+=item B<ServerInfoFile>
+
+Attempts to use the file B<value> in the "serverinfo" extension using the
+function SSL_CTX_use_serverinfo_file.
+
+=item B<DHParameters>
+
+Attempts to use the file B<value> as the set of temporary DH parameters for
+the appropriate context. This option is only supported if certificate
+operations are permitted.
=item B<SignatureAlgorithms>
The B<value> argument is a comma separated list of supported protocols to
enable or disable. If an protocol is preceded by B<-> that version is disabled.
All versions are enabled by default, though applications may choose to
-explicitly disable some. Currently supported protocol values are B<SSLv2>,
+explicitly disable some. Currently supported protocol values are
B<SSLv3>, B<TLSv1>, B<TLSv1.1> and B<TLSv1.2>. The special value B<ALL> refers
to all supported versions.
to use for an incoming connection. Equivalent to
B<SSL_OP_CIPHER_SERVER_PREFERENCE>. Only used by servers.
+B<NoResumptionOnRenegotiation> set
+B<SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION> flag. Only used by servers.
+
B<UnsafeLegacyRenegotiation> permits the use of unsafe legacy renegotiation.
Equivalent to B<SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION>.
for OpenSSL clients only. Equivalent to B<SSL_OP_LEGACY_SERVER_CONNECT>.
Set by default.
+=item B<VerifyMode>
+
+The B<value> argument is a comma separated list of flags to set.
+
+B<Peer> enables peer verification: for clients only.
+
+B<Request> requests but does not require a certificate from the client.
+Servers only.
+
+B<Require> requests and requires a certificate from the client: an error
+occurs if the client does not present a certificate. Servers only.
+
+B<Once> requests a certificate from a client only on the initial connection:
+not when renegotiating. Servers only.
+
+=item B<ClientCAFile>, B<ClientCAPath>
+
+A file or directory of certificates in PEM format whose names are used as the
+set of acceptable names for client CAs. Servers only. This option is only
+supported if certificate operations are permitted.
+
=back
=head1 SUPPORTED COMMAND TYPES
The value is a directory name.
+=item B<SSL_CONF_TYPE_NONE>
+
+The value string is not used e.g. a command line option which doesn't take an
+argument.
+
+=back
+
=head1 NOTES
The order of operations is significant. This can be used to set either defaults
or values which cannot be overridden. For example if an application calls:
- SSL_CONF_cmd(ctx, "Protocol", "-SSLv2");
+ SSL_CONF_cmd(ctx, "Protocol", "-SSLv3");
SSL_CONF_cmd(ctx, userparam, uservalue);
-it will disable SSLv2 support by default but the user can override it. If
+it will disable SSLv3 support by default but the user can override it. If
however the call sequence is:
SSL_CONF_cmd(ctx, userparam, uservalue);
- SSL_CONF_cmd(ctx, "Protocol", "-SSLv2");
+ SSL_CONF_cmd(ctx, "Protocol", "-SSLv3");
-SSLv2 is B<always> disabled and attempt to override this by the user are
+SSLv3 is B<always> disabled and attempt to override this by the user are
ignored.
By checking the return code of SSL_CTX_cmd() it is possible to query if a
SSL_CONF_cmd(ctx, "SignatureAlgorithms", "ECDSA+SHA256:RSA+SHA256:DSA+SHA256");
-Enable all protocols except SSLv3 and SSLv2:
+Enable all protocols except SSLv3:
- SSL_CONF_cmd(ctx, "Protocol", "ALL,-SSLv3,-SSLv2");
+ SSL_CONF_cmd(ctx, "Protocol", "ALL,-SSLv3");
Only enable TLSv1.2:
=head1 SEE ALSO
-L<SSL_CONF_CTX_new(3)|SSL_CONF_CTX_new(3)>,
-L<SSL_CONF_CTX_set_flags(3)|SSL_CONF_CTX_set_flags(3)>,
-L<SSL_CONF_CTX_set1_prefix(3)|SSL_CONF_CTX_set1_prefix(3)>,
-L<SSL_CONF_CTX_set_ssl_ctx(3)|SSL_CONF_CTX_set_ssl_ctx(3)>,
-L<SSL_CONF_cmd_argv(3)|SSL_CONF_cmd_argv(3)>
+L<SSL_CONF_CTX_new(3)>,
+L<SSL_CONF_CTX_set_flags(3)>,
+L<SSL_CONF_CTX_set1_prefix(3)>,
+L<SSL_CONF_CTX_set_ssl_ctx(3)>,
+L<SSL_CONF_cmd_argv(3)>
=head1 HISTORY
SSL_CONF_cmd() was first added to OpenSSL 1.0.2
+B<SSL_OP_NO_SSL2> doesn't have effect anymore since 1.1.0 but the define is kept
+for backward compatibility.
+
+B<SSL_CONF_TYPE_NONE> was first added to OpenSSL 1.1.0. In earlier versions of
+OpenSSL passing a command which didn't take an argument would return
+B<SSL_CONF_TYPE_UNKNOWN>.
+
=cut