Don't emit SSE2 instructions unless were asked to.

[openssl.git] / crypto / x86cpuid.pl

diff --git a/crypto/x86cpuid.pl b/crypto/x86cpuid.pl
index 85fbef7417b5e64b02bb989b697ed821a00e47d5..3d5d16bb643aae405a124cd8b81127f939684ad6 100644 (file)
--- a/crypto/x86cpuid.pl
+++ b/crypto/x86cpuid.pl
@@ -5,6 +5,8 @@ require "x86asm.pl";
 
 &asm_init($ARGV[0],"x86cpuid");
 
+for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); }
+
 &function_begin("OPENSSL_ia32_cpuid");
        &xor    ("edx","edx");
        &pushf  ();
@@ -25,12 +27,12 @@ require "x86asm.pl";
        &mov    ("edx","ecx");
 &function_end("OPENSSL_ia32_cpuid");
 
-&external_label("OPENSSL_ia32cap");
+&external_label("OPENSSL_ia32cap_P");
 
-&function_begin_B("OPENSSL_rdtsc");
+&function_begin_B("OPENSSL_rdtsc","EXTRN\t_OPENSSL_ia32cap_P:DWORD");
        &xor    ("eax","eax");
        &xor    ("edx","edx");
-       &picmeup("ecx","OPENSSL_ia32cap");
+       &picmeup("ecx","OPENSSL_ia32cap_P");
        &bt     (&DWP(0,"ecx"),4);
        &jnc    (&label("notsc"));
        &rdtsc  ();
@@ -38,6 +40,120 @@ require "x86asm.pl";
        &ret    ();
 &function_end_B("OPENSSL_rdtsc");
 
-&initseg("OPENSSL_cpuid_setup") if ($main'elf);
+# This works in Ring 0 only [read DJGPP+MS-DOS+privileged DPMI host],
+# but it's safe to call it on any [supported] 32-bit platform...
+# Just check for [non-]zero return value...
+&function_begin_B("OPENSSL_instrument_halt","EXTRN\t_OPENSSL_ia32cap_P:DWORD");
+       &picmeup("ecx","OPENSSL_ia32cap_P");
+       &bt     (&DWP(0,"ecx"),4);
+       &jnc    (&label("nohalt"));     # no TSC
+
+       &data_word(0x9058900e);         # push %cs; pop %eax
+       &and    ("eax",3);
+       &jnz    (&label("nohalt"));     # not enough privileges
+
+       &pushf  ();
+       &pop    ("eax")
+       &bt     ("eax",9);
+       &jnc    (&label("nohalt"));     # interrupts are disabled
+
+       &rdtsc  ();
+       &push   ("edx");
+       &push   ("eax");
+       &halt   ();
+       &rdtsc  ();
+
+       &sub    ("eax",&DWP(0,"esp"));
+       &sbb    ("edx",&DWP(4,"esp"));
+       &add    ("esp",8);
+       &ret    ();
+
+&set_label("nohalt");
+       &xor    ("eax","eax");
+       &xor    ("edx","edx");
+       &ret    ();
+&function_end_B("OPENSSL_instrument_halt");
+
+# Essentially there is only one use for this function. Under DJGPP:
+#
+#      #include <go32.h>
+#      ...
+#      i=OPENSSL_far_spin(_dos_ds,0x46c);
+#      ...
+# to obtain the number of spins till closest timer interrupt.
+
+&function_begin_B("OPENSSL_far_spin");
+       &pushf  ();
+       &pop    ("eax")
+       &bt     ("eax",9);
+       &jnc    (&label("nospin"));     # interrupts are disabled
+
+       &mov    ("eax",&DWP(4,"esp"));
+       &mov    ("ecx",&DWP(8,"esp"));
+       &data_word (0x90d88e1e);        # push %ds, mov %eax,%ds
+       &xor    ("eax","eax");
+       &mov    ("edx",&DWP(0,"ecx"));
+       &jmp    (&label("spin"));
+
+       &align  (16);
+&set_label("spin");
+       &inc    ("eax");
+       &cmp    ("edx",&DWP(0,"ecx"));
+       &je     (&label("spin"));
+
+       &data_word (0x1f909090);        # pop   %ds
+       &ret    ();
+
+&set_label("nospin");
+       &xor    ("eax","eax");
+       &xor    ("edx","edx");
+       &ret    ();
+&function_end_B("OPENSSL_far_spin");
+
+&function_begin_B("OPENSSL_wipe_cpu","EXTRN\t_OPENSSL_ia32cap_P:DWORD");
+       &xor    ("eax","eax");
+       &xor    ("edx","edx");
+       &picmeup("ecx","OPENSSL_ia32cap_P");
+       &mov    ("ecx",&DWP(0,"ecx"));
+       &bt     (&DWP(0,"ecx"),1);
+       &jnc    (&label("no_x87"));
+       if ($sse2) {
+               &bt     (&DWP(0,"ecx"),26);
+               &jnc    (&label("no_sse2"));
+               &pxor   ("xmm0","xmm0");
+               &pxor   ("xmm1","xmm1");
+               &pxor   ("xmm2","xmm2");
+               &pxor   ("xmm3","xmm3");
+               &pxor   ("xmm4","xmm4");
+               &pxor   ("xmm5","xmm5");
+               &pxor   ("xmm6","xmm6");
+               &pxor   ("xmm7","xmm7");
+       &set_label("no_sse2");
+       }
+       # just a bunch of fldz to zap the fp/mm bank...
+       &data_word(0xeed9eed9,0xeed9eed9,0xeed9eed9,0xeed9eed9);
+       &emms   ();
+&set_label("no_x87");
+       &lea    ("eax",&DWP(4,"esp"));
+       &ret    ();
+&function_end_B("OPENSSL_wipe_cpu");
+
+&function_begin_B("OPENSSL_atomic_add");
+       &mov    ("edx",&DWP(4,"esp"));  # fetch the pointer, 1st arg
+       &mov    ("ecx",&DWP(8,"esp"));  # fetch the increment, 2nd arg
+       &push   ("ebx");
+       &nop    ();
+       &mov    ("eax",&DWP(0,"edx"));
+&set_label("spin");
+       &lea    ("ebx",&DWP(0,"eax","ecx"));
+       &nop    ();
+       &data_word(0x1ab10ff0); # lock; cmpxchg %ebx,(%edx)     # %eax is envolved and is always reloaded
+       &jne    (&label("spin"));
+       &mov    ("eax","ebx");  # OpenSSL expects the new value
+       &pop    ("ebx");
+       &ret    ();
+&function_end_B("OPENSSL_atomic_add");
+
+&initseg("OPENSSL_cpuid_setup");
 
 &asm_finish();