-#!/usr/bin/env perl
+#! /usr/bin/env perl
+# Copyright 2014-2018 The OpenSSL Project Authors. All Rights Reserved.
#
+# Licensed under the Apache License 2.0 (the "License"). You may not use
+# this file except in compliance with the License. You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
# ====================================================================
# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
# project. The module is, however, dual licensed under OpenSSL and
# CRYPTOGAMS licenses depending on where you obtain it. For further
# details see http://www.openssl.org/~appro/cryptogams/.
+#
+# Permission to use under GPLv2 terms is granted.
# ====================================================================
#
# SHA256/512 for ARMv8.
#
# SHA256-hw SHA256(*) SHA512
# Apple A7 1.97 10.5 (+33%) 6.73 (-1%(**))
-# Cortex-A5x n/a n/a n/a
-#
+# Cortex-A53 2.38 15.5 (+115%) 10.0 (+150%(***))
+# Cortex-A57 2.31 11.6 (+86%) 7.51 (+260%(***))
+# Denver 2.01 10.5 (+26%) 6.70 (+8%)
+# X-Gene 20.0 (+100%) 12.8 (+300%(***))
+# Mongoose 2.36 13.0 (+50%) 8.36 (+33%)
+# Kryo 1.92 17.4 (+30%) 11.2 (+8%)
+#
# (*) Software SHA256 results are of lesser relevance, presented
# mostly for informational purposes.
# (**) The result is a trade-off: it's possible to improve it by
-# 10%, but at the cost of 20% loss on Cortex-A5x.
-
-$flavour=shift;
-$output=shift;
-open STDOUT,">$output";
+# 10% (or by 1 cycle per round), but at the cost of 20% loss
+# on Cortex-A53 (or by 4 cycles per round).
+# (***) Super-impressive coefficients over gcc-generated code are
+# indication of some compiler "pathology", most notably code
+# generated with -mgeneral-regs-only is significantly faster
+# and the gap is only 40-90%.
+#
+# October 2016.
+#
+# Originally it was reckoned that it makes no sense to implement NEON
+# version of SHA256 for 64-bit processors. This is because performance
+# improvement on most wide-spread Cortex-A5x processors was observed
+# to be marginal, same on Cortex-A53 and ~10% on A57. But then it was
+# observed that 32-bit NEON SHA256 performs significantly better than
+# 64-bit scalar version on *some* of the more recent processors. As
+# result 64-bit NEON version of SHA256 was added to provide best
+# all-round performance. For example it executes ~30% faster on X-Gene
+# and Mongoose. [For reference, NEON version of SHA512 is bound to
+# deliver much less improvement, likely *negative* on Cortex-A5x.
+# Which is why NEON support is limited to SHA256.]
+
+$output=pop;
+$flavour=pop;
+
+if ($flavour && $flavour ne "void") {
+ $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+ ( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
+ ( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
+ die "can't locate arm-xlate.pl";
+
+ open OUT,"| \"$^X\" $xlate $flavour $output";
+ *STDOUT=*OUT;
+} else {
+ open STDOUT,">$output";
+}
if ($output =~ /512/) {
$BITS=512;
$T0=@X[$i+3] if ($i<11);
$code.=<<___ if ($i<16);
-#ifndef __ARMEB__
+#ifndef __AARCH64EB__
rev @X[$i],@X[$i] // $i
#endif
___
}
$code.=<<___;
-#include "arm_arch.h"
+#ifndef __KERNEL__
+# include "arm_arch.h"
+.extern OPENSSL_armcap_P
+#endif
.text
.type $func,%function
.align 6
$func:
+#ifndef __KERNEL__
+ adrp x16,OPENSSL_armcap_P
+ ldr w16,[x16,#:lo12:OPENSSL_armcap_P]
___
$code.=<<___ if ($SZ==4);
- ldr x16,.LOPENSSL_armcap_P
- adr x17,.LOPENSSL_armcap_P
- add x16,x16,x17
- ldr w16,[x16]
tst w16,#ARMV8_SHA256
b.ne .Lv8_entry
+ tst w16,#ARMV7_NEON
+ b.ne .Lneon_entry
+___
+$code.=<<___ if ($SZ==8);
+ tst w16,#ARMV8_SHA512
+ b.ne .Lv8_entry
___
$code.=<<___;
+#endif
+ .inst 0xd503233f // paciasp
stp x29,x30,[sp,#-128]!
add x29,sp,#0
ldp $E,$F,[$ctx,#4*$SZ]
add $num,$inp,$num,lsl#`log(16*$SZ)/log(2)` // end of input
ldp $G,$H,[$ctx,#6*$SZ]
- adr $Ktbl,K$BITS
+ adr $Ktbl,.LK$BITS
stp $ctx,$num,[x29,#96]
.Loop:
ldp x25,x26,[x29,#64]
ldp x27,x28,[x29,#80]
ldp x29,x30,[sp],#128
+ .inst 0xd50323bf // autiasp
ret
.size $func,.-$func
.align 6
-.type K$BITS,%object
-K$BITS:
+.type .LK$BITS,%object
+.LK$BITS:
___
$code.=<<___ if ($SZ==8);
.quad 0x428a2f98d728ae22,0x7137449123ef65cd
.long 0 //terminator
___
$code.=<<___;
-.size K$BITS,.-K$BITS
-.align 3
-.LOPENSSL_armcap_P:
- .quad OPENSSL_armcap_P-.
+.size .LK$BITS,.-.LK$BITS
.asciz "SHA$BITS block transform for ARMv8, CRYPTOGAMS by <appro\@openssl.org>"
.align 2
___
my ($ABCD_SAVE,$EFGH_SAVE)=("v18.16b","v19.16b");
$code.=<<___;
+#ifndef __KERNEL__
.type sha256_block_armv8,%function
.align 6
sha256_block_armv8:
add x29,sp,#0
ld1.32 {$ABCD,$EFGH},[$ctx]
- adr $Ktbl,K256
+ adr $Ktbl,.LK256
.Loop_hw:
ld1 {@MSG[0]-@MSG[3]},[$inp],#64
ldr x29,[sp],#16
ret
.size sha256_block_armv8,.-sha256_block_armv8
+#endif
+___
+}
+
+if ($SZ==4) { ######################################### NEON stuff #
+# You'll surely note a lot of similarities with sha256-armv4 module,
+# and of course it's not a coincidence. sha256-armv4 was used as
+# initial template, but was adapted for ARMv8 instruction set and
+# extensively re-tuned for all-round performance.
+
+my @V = ($A,$B,$C,$D,$E,$F,$G,$H) = map("w$_",(3..10));
+my ($t0,$t1,$t2,$t3,$t4) = map("w$_",(11..15));
+my $Ktbl="x16";
+my $Xfer="x17";
+my @X = map("q$_",(0..3));
+my ($T0,$T1,$T2,$T3,$T4,$T5,$T6,$T7) = map("q$_",(4..7,16..19));
+my $j=0;
+
+sub AUTOLOAD() # thunk [simplified] x86-style perlasm
+{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; $opcode =~ s/_/\./;
+ my $arg = pop;
+ $arg = "#$arg" if ($arg*1 eq $arg);
+ $code .= "\t$opcode\t".join(',',@_,$arg)."\n";
+}
+
+sub Dscalar { shift =~ m|[qv]([0-9]+)|?"d$1":""; }
+sub Dlo { shift =~ m|[qv]([0-9]+)|?"v$1.d[0]":""; }
+sub Dhi { shift =~ m|[qv]([0-9]+)|?"v$1.d[1]":""; }
+
+sub Xupdate()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body);
+ my ($a,$b,$c,$d,$e,$f,$g,$h);
+
+ &ext_8 ($T0,@X[0],@X[1],4); # X[1..4]
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &ext_8 ($T3,@X[2],@X[3],4); # X[9..12]
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &mov (&Dscalar($T7),&Dhi(@X[3])); # X[14..15]
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &ushr_32 ($T2,$T0,$sigma0[0]);
+ eval(shift(@insns));
+ &ushr_32 ($T1,$T0,$sigma0[2]);
+ eval(shift(@insns));
+ &add_32 (@X[0],@X[0],$T3); # X[0..3] += X[9..12]
+ eval(shift(@insns));
+ &sli_32 ($T2,$T0,32-$sigma0[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &ushr_32 ($T3,$T0,$sigma0[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &eor_8 ($T1,$T1,$T2);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &sli_32 ($T3,$T0,32-$sigma0[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &ushr_32 ($T4,$T7,$sigma1[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &eor_8 ($T1,$T1,$T3); # sigma0(X[1..4])
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &sli_32 ($T4,$T7,32-$sigma1[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &ushr_32 ($T5,$T7,$sigma1[2]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &ushr_32 ($T3,$T7,$sigma1[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &add_32 (@X[0],@X[0],$T1); # X[0..3] += sigma0(X[1..4])
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &sli_u32 ($T3,$T7,32-$sigma1[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &eor_8 ($T5,$T5,$T4);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &eor_8 ($T5,$T5,$T3); # sigma1(X[14..15])
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &add_32 (@X[0],@X[0],$T5); # X[0..1] += sigma1(X[14..15])
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &ushr_32 ($T6,@X[0],$sigma1[0]);
+ eval(shift(@insns));
+ &ushr_32 ($T7,@X[0],$sigma1[2]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &sli_32 ($T6,@X[0],32-$sigma1[0]);
+ eval(shift(@insns));
+ &ushr_32 ($T5,@X[0],$sigma1[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &eor_8 ($T7,$T7,$T6);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &sli_32 ($T5,@X[0],32-$sigma1[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &ld1_32 ("{$T0}","[$Ktbl], #16");
+ eval(shift(@insns));
+ &eor_8 ($T7,$T7,$T5); # sigma1(X[16..17])
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &eor_8 ($T5,$T5,$T5);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &mov (&Dhi($T5), &Dlo($T7));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &add_32 (@X[0],@X[0],$T5); # X[2..3] += sigma1(X[16..17])
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &add_32 ($T0,$T0,@X[0]);
+ while($#insns>=1) { eval(shift(@insns)); }
+ &st1_32 ("{$T0}","[$Xfer], #16");
+ eval(shift(@insns));
+
+ push(@X,shift(@X)); # "rotate" X[]
+}
+
+sub Xpreload()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body);
+ my ($a,$b,$c,$d,$e,$f,$g,$h);
+
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &ld1_8 ("{@X[0]}","[$inp],#16");
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &ld1_32 ("{$T0}","[$Ktbl],#16");
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &rev32 (@X[0],@X[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &add_32 ($T0,$T0,@X[0]);
+ foreach (@insns) { eval; } # remaining instructions
+ &st1_32 ("{$T0}","[$Xfer], #16");
+
+ push(@X,shift(@X)); # "rotate" X[]
+}
+
+sub body_00_15 () {
+ (
+ '($a,$b,$c,$d,$e,$f,$g,$h)=@V;'.
+ '&add ($h,$h,$t1)', # h+=X[i]+K[i]
+ '&add ($a,$a,$t4);'. # h+=Sigma0(a) from the past
+ '&and ($t1,$f,$e)',
+ '&bic ($t4,$g,$e)',
+ '&eor ($t0,$e,$e,"ror#".($Sigma1[1]-$Sigma1[0]))',
+ '&add ($a,$a,$t2)', # h+=Maj(a,b,c) from the past
+ '&orr ($t1,$t1,$t4)', # Ch(e,f,g)
+ '&eor ($t0,$t0,$e,"ror#".($Sigma1[2]-$Sigma1[0]))', # Sigma1(e)
+ '&eor ($t4,$a,$a,"ror#".($Sigma0[1]-$Sigma0[0]))',
+ '&add ($h,$h,$t1)', # h+=Ch(e,f,g)
+ '&ror ($t0,$t0,"#$Sigma1[0]")',
+ '&eor ($t2,$a,$b)', # a^b, b^c in next round
+ '&eor ($t4,$t4,$a,"ror#".($Sigma0[2]-$Sigma0[0]))', # Sigma0(a)
+ '&add ($h,$h,$t0)', # h+=Sigma1(e)
+ '&ldr ($t1,sprintf "[sp,#%d]",4*(($j+1)&15)) if (($j&15)!=15);'.
+ '&ldr ($t1,"[$Ktbl]") if ($j==15);'.
+ '&and ($t3,$t3,$t2)', # (b^c)&=(a^b)
+ '&ror ($t4,$t4,"#$Sigma0[0]")',
+ '&add ($d,$d,$h)', # d+=h
+ '&eor ($t3,$t3,$b)', # Maj(a,b,c)
+ '$j++; unshift(@V,pop(@V)); ($t2,$t3)=($t3,$t2);'
+ )
+}
+
+$code.=<<___;
+#ifdef __KERNEL__
+.globl sha256_block_neon
+#endif
+.type sha256_block_neon,%function
+.align 4
+sha256_block_neon:
+.Lneon_entry:
+ stp x29, x30, [sp, #-16]!
+ mov x29, sp
+ sub sp,sp,#16*4
+
+ adr $Ktbl,.LK256
+ add $num,$inp,$num,lsl#6 // len to point at the end of inp
+
+ ld1.8 {@X[0]},[$inp], #16
+ ld1.8 {@X[1]},[$inp], #16
+ ld1.8 {@X[2]},[$inp], #16
+ ld1.8 {@X[3]},[$inp], #16
+ ld1.32 {$T0},[$Ktbl], #16
+ ld1.32 {$T1},[$Ktbl], #16
+ ld1.32 {$T2},[$Ktbl], #16
+ ld1.32 {$T3},[$Ktbl], #16
+ rev32 @X[0],@X[0] // yes, even on
+ rev32 @X[1],@X[1] // big-endian
+ rev32 @X[2],@X[2]
+ rev32 @X[3],@X[3]
+ mov $Xfer,sp
+ add.32 $T0,$T0,@X[0]
+ add.32 $T1,$T1,@X[1]
+ add.32 $T2,$T2,@X[2]
+ st1.32 {$T0-$T1},[$Xfer], #32
+ add.32 $T3,$T3,@X[3]
+ st1.32 {$T2-$T3},[$Xfer]
+ sub $Xfer,$Xfer,#32
+
+ ldp $A,$B,[$ctx]
+ ldp $C,$D,[$ctx,#8]
+ ldp $E,$F,[$ctx,#16]
+ ldp $G,$H,[$ctx,#24]
+ ldr $t1,[sp,#0]
+ mov $t2,wzr
+ eor $t3,$B,$C
+ mov $t4,wzr
+ b .L_00_48
+
+.align 4
+.L_00_48:
+___
+ &Xupdate(\&body_00_15);
+ &Xupdate(\&body_00_15);
+ &Xupdate(\&body_00_15);
+ &Xupdate(\&body_00_15);
+$code.=<<___;
+ cmp $t1,#0 // check for K256 terminator
+ ldr $t1,[sp,#0]
+ sub $Xfer,$Xfer,#64
+ bne .L_00_48
+
+ sub $Ktbl,$Ktbl,#256 // rewind $Ktbl
+ cmp $inp,$num
+ mov $Xfer, #64
+ csel $Xfer, $Xfer, xzr, eq
+ sub $inp,$inp,$Xfer // avoid SEGV
+ mov $Xfer,sp
+___
+ &Xpreload(\&body_00_15);
+ &Xpreload(\&body_00_15);
+ &Xpreload(\&body_00_15);
+ &Xpreload(\&body_00_15);
+$code.=<<___;
+ add $A,$A,$t4 // h+=Sigma0(a) from the past
+ ldp $t0,$t1,[$ctx,#0]
+ add $A,$A,$t2 // h+=Maj(a,b,c) from the past
+ ldp $t2,$t3,[$ctx,#8]
+ add $A,$A,$t0 // accumulate
+ add $B,$B,$t1
+ ldp $t0,$t1,[$ctx,#16]
+ add $C,$C,$t2
+ add $D,$D,$t3
+ ldp $t2,$t3,[$ctx,#24]
+ add $E,$E,$t0
+ add $F,$F,$t1
+ ldr $t1,[sp,#0]
+ stp $A,$B,[$ctx,#0]
+ add $G,$G,$t2
+ mov $t2,wzr
+ stp $C,$D,[$ctx,#8]
+ add $H,$H,$t3
+ stp $E,$F,[$ctx,#16]
+ eor $t3,$B,$C
+ stp $G,$H,[$ctx,#24]
+ mov $t4,wzr
+ mov $Xfer,sp
+ b.ne .L_00_48
+
+ ldr x29,[x29]
+ add sp,sp,#16*4+16
+ ret
+.size sha256_block_neon,.-sha256_block_neon
___
}
+if ($SZ==8) {
+my $Ktbl="x3";
+
+my @H = map("v$_.16b",(0..4));
+my ($fg,$de,$m9_10)=map("v$_.16b",(5..7));
+my @MSG=map("v$_.16b",(16..23));
+my ($W0,$W1)=("v24.2d","v25.2d");
+my ($AB,$CD,$EF,$GH)=map("v$_.16b",(26..29));
+
$code.=<<___;
+#ifndef __KERNEL__
+.type sha512_block_armv8,%function
+.align 6
+sha512_block_armv8:
+.Lv8_entry:
+ stp x29,x30,[sp,#-16]!
+ add x29,sp,#0
+
+ ld1 {@MSG[0]-@MSG[3]},[$inp],#64 // load input
+ ld1 {@MSG[4]-@MSG[7]},[$inp],#64
+
+ ld1.64 {@H[0]-@H[3]},[$ctx] // load context
+ adr $Ktbl,.LK512
+
+ rev64 @MSG[0],@MSG[0]
+ rev64 @MSG[1],@MSG[1]
+ rev64 @MSG[2],@MSG[2]
+ rev64 @MSG[3],@MSG[3]
+ rev64 @MSG[4],@MSG[4]
+ rev64 @MSG[5],@MSG[5]
+ rev64 @MSG[6],@MSG[6]
+ rev64 @MSG[7],@MSG[7]
+ b .Loop_hw
+
+.align 4
+.Loop_hw:
+ ld1.64 {$W0},[$Ktbl],#16
+ subs $num,$num,#1
+ sub x4,$inp,#128
+ orr $AB,@H[0],@H[0] // offload
+ orr $CD,@H[1],@H[1]
+ orr $EF,@H[2],@H[2]
+ orr $GH,@H[3],@H[3]
+ csel $inp,$inp,x4,ne // conditional rewind
+___
+for($i=0;$i<32;$i++) {
+$code.=<<___;
+ add.i64 $W0,$W0,@MSG[0]
+ ld1.64 {$W1},[$Ktbl],#16
+ ext $W0,$W0,$W0,#8
+ ext $fg,@H[2],@H[3],#8
+ ext $de,@H[1],@H[2],#8
+ add.i64 @H[3],@H[3],$W0 // "T1 + H + K512[i]"
+ sha512su0 @MSG[0],@MSG[1]
+ ext $m9_10,@MSG[4],@MSG[5],#8
+ sha512h @H[3],$fg,$de
+ sha512su1 @MSG[0],@MSG[7],$m9_10
+ add.i64 @H[4],@H[1],@H[3] // "D + T1"
+ sha512h2 @H[3],$H[1],@H[0]
+___
+ ($W0,$W1)=($W1,$W0); push(@MSG,shift(@MSG));
+ @H = (@H[3],@H[0],@H[4],@H[2],@H[1]);
+}
+for(;$i<40;$i++) {
+$code.=<<___ if ($i<39);
+ ld1.64 {$W1},[$Ktbl],#16
+___
+$code.=<<___ if ($i==39);
+ sub $Ktbl,$Ktbl,#$rounds*$SZ // rewind
+___
+$code.=<<___;
+ add.i64 $W0,$W0,@MSG[0]
+ ld1 {@MSG[0]},[$inp],#16 // load next input
+ ext $W0,$W0,$W0,#8
+ ext $fg,@H[2],@H[3],#8
+ ext $de,@H[1],@H[2],#8
+ add.i64 @H[3],@H[3],$W0 // "T1 + H + K512[i]"
+ sha512h @H[3],$fg,$de
+ rev64 @MSG[0],@MSG[0]
+ add.i64 @H[4],@H[1],@H[3] // "D + T1"
+ sha512h2 @H[3],$H[1],@H[0]
+___
+ ($W0,$W1)=($W1,$W0); push(@MSG,shift(@MSG));
+ @H = (@H[3],@H[0],@H[4],@H[2],@H[1]);
+}
+$code.=<<___;
+ add.i64 @H[0],@H[0],$AB // accumulate
+ add.i64 @H[1],@H[1],$CD
+ add.i64 @H[2],@H[2],$EF
+ add.i64 @H[3],@H[3],$GH
+
+ cbnz $num,.Loop_hw
+
+ st1.64 {@H[0]-@H[3]},[$ctx] // store context
+
+ ldr x29,[sp],#16
+ ret
+.size sha512_block_armv8,.-sha512_block_armv8
+#endif
+___
+}
+
+$code.=<<___;
+#if !defined(__KERNEL__) && !defined(_WIN64)
.comm OPENSSL_armcap_P,4,4
+#endif
___
{ my %opcode = (
$arg =~ m/[qv]([0-9]+)[^,]*,\s*[qv]([0-9]+)[^,]*(?:,\s*[qv]([0-9]+))?/o
&&
- sprintf ".long\t0x%08x\t//%s %s",
+ sprintf ".inst\t0x%08x\t//%s %s",
+ $opcode{$mnemonic}|$1|($2<<5)|($3<<16),
+ $mnemonic,$arg;
+ }
+}
+
+{ my %opcode = (
+ "sha512h" => 0xce608000, "sha512h2" => 0xce608400,
+ "sha512su0" => 0xcec08000, "sha512su1" => 0xce608800 );
+
+ sub unsha512 {
+ my ($mnemonic,$arg)=@_;
+
+ $arg =~ m/[qv]([0-9]+)[^,]*,\s*[qv]([0-9]+)[^,]*(?:,\s*[qv]([0-9]+))?/o
+ &&
+ sprintf ".inst\t0x%08x\t//%s %s",
$opcode{$mnemonic}|$1|($2<<5)|($3<<16),
$mnemonic,$arg;
}
}
+open SELF,$0;
+while(<SELF>) {
+ next if (/^#!/);
+ last if (!s/^#/\/\// and !/^$/);
+ print;
+}
+close SELF;
+
foreach(split("\n",$code)) {
- s/\`([^\`]*)\`/eval($1)/geo;
+ s/\`([^\`]*)\`/eval($1)/ge;
+
+ s/\b(sha512\w+)\s+([qv].*)/unsha512($1,$2)/ge or
+ s/\b(sha256\w+)\s+([qv].*)/unsha256($1,$2)/ge;
- s/\b(sha256\w+)\s+([qv].*)/unsha256($1,$2)/geo;
+ s/\bq([0-9]+)\b/v$1.16b/g; # old->new registers
- s/\.\w?32\b//o and s/\.16b/\.4s/go;
- m/(ld|st)1[^\[]+\[0\]/o and s/\.4s/\.s/go;
+ s/\.[ui]?8(\s)/$1/;
+ s/\.\w?64\b// and s/\.16b/\.2d/g or
+ s/\.\w?32\b// and s/\.16b/\.4s/g;
+ m/\bext\b/ and s/\.2d/\.16b/g or
+ m/(ld|st)1[^\[]+\[0\]/ and s/\.4s/\.s/g;
print $_,"\n";
}
projects / openssl.git / blobdiff