/*
- * Copyright 1995-2016 The OpenSSL Project Authors. All Rights Reserved.
+ * Copyright 1995-2020 The OpenSSL Project Authors. All Rights Reserved.
*
- * Licensed under the OpenSSL license (the "License"). You may not use
+ * Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
* in the file LICENSE in the source distribution or at
* https://www.openssl.org/source/license.html
#include <time.h>
#include "internal/cryptlib.h"
#include <openssl/opensslconf.h>
-#include "internal/rand_int.h"
+#include "crypto/rand.h"
#include <openssl/engine.h>
#include "internal/thread_once.h"
-#include "rand_lcl.h"
+#include "rand_local.h"
+#include "e_os.h"
-#ifndef OPENSSL_NO_ENGINE
+#ifndef FIPS_MODULE
+# ifndef OPENSSL_NO_ENGINE
/* non-NULL if default_RAND_meth is ENGINE-provided */
static ENGINE *funct_ref;
static CRYPTO_RWLOCK *rand_engine_lock;
-#endif
+# endif
static CRYPTO_RWLOCK *rand_meth_lock;
static const RAND_METHOD *default_RAND_meth;
static CRYPTO_ONCE rand_init = CRYPTO_ONCE_STATIC_INIT;
-RAND_BYTES_BUFFER rand_bytes;
-int rand_fork_count;
+
+static int rand_inited = 0;
+#endif /* FIPS_MODULE */
#ifdef OPENSSL_RAND_SEED_RDTSC
/*
# error "RDTSC enabled? Should not be possible!"
/*
+ * Acquire entropy from high-speed clock
+ *
* Since we get some randomness from the low-order bits of the
- * high-speec clock, it can help. But don't return a status since
- * it's not sufficient to indicate whether or not the seeding was
- * done.
+ * high-speed clock, it can help.
+ *
+ * Returns the total entropy count, if it exceeds the requested
+ * entropy count. Otherwise, returns an entropy count of 0.
*/
-void rand_read_tsc(RAND_poll_fn cb, void *arg)
+size_t rand_acquire_entropy_from_tsc(RAND_POOL *pool)
{
unsigned char c;
int i;
if ((OPENSSL_ia32cap_P[0] & (1 << 4)) != 0) {
for (i = 0; i < TSC_READ_COUNT; i++) {
c = (unsigned char)(OPENSSL_rdtsc() & 0xFF);
- cb(arg, &c, 1, 0.5);
+ rand_pool_add(pool, &c, 1, 4);
}
}
+ return rand_pool_entropy_available(pool);
}
#endif
#ifdef OPENSSL_RAND_SEED_RDCPU
-size_t OPENSSL_ia32_rdseed_bytes(char *buf, size_t len);
-size_t OPENSSL_ia32_rdrand_bytes(char *buf, size_t len);
+size_t OPENSSL_ia32_rdseed_bytes(unsigned char *buf, size_t len);
+size_t OPENSSL_ia32_rdrand_bytes(unsigned char *buf, size_t len);
-extern unsigned int OPENSSL_ia32cap_P[];
-
-int rand_read_cpu(RAND_poll_fn cb, void *arg)
+/*
+ * Acquire entropy using Intel-specific cpu instructions
+ *
+ * Uses the RDSEED instruction if available, otherwise uses
+ * RDRAND if available.
+ *
+ * For the differences between RDSEED and RDRAND, and why RDSEED
+ * is the preferred choice, see https://goo.gl/oK3KcN
+ *
+ * Returns the total entropy count, if it exceeds the requested
+ * entropy count. Otherwise, returns an entropy count of 0.
+ */
+size_t rand_acquire_entropy_from_cpu(RAND_POOL *pool)
{
- char buff[RANDOMNESS_NEEDED];
-
- /* If RDSEED is available, use that. */
- if ((OPENSSL_ia32cap_P[2] & (1 << 18)) != 0) {
- if (OPENSSL_ia32_rdseed_bytes(buff, sizeof(buff)) == sizeof(buff)) {
- cb(arg, buff, (int)sizeof(buff), sizeof(buff));
- return 1;
- }
- }
-
- /* Second choice is RDRAND. */
- if ((OPENSSL_ia32cap_P[1] & (1 << (62 - 32))) != 0) {
- if (OPENSSL_ia32_rdrand_bytes(buff, sizeof(buff)) == sizeof(buff)) {
- cb(arg, buff, (int)sizeof(buff), sizeof(buff));
- return 1;
+ size_t bytes_needed;
+ unsigned char *buffer;
+
+ bytes_needed = rand_pool_bytes_needed(pool, 1 /*entropy_factor*/);
+ if (bytes_needed > 0) {
+ buffer = rand_pool_add_begin(pool, bytes_needed);
+
+ if (buffer != NULL) {
+ /* Whichever comes first, use RDSEED, RDRAND or nothing */
+ if ((OPENSSL_ia32cap_P[2] & (1 << 18)) != 0) {
+ if (OPENSSL_ia32_rdseed_bytes(buffer, bytes_needed)
+ == bytes_needed) {
+ rand_pool_add_end(pool, bytes_needed, 8 * bytes_needed);
+ }
+ } else if ((OPENSSL_ia32cap_P[1] & (1 << (62 - 32))) != 0) {
+ if (OPENSSL_ia32_rdrand_bytes(buffer, bytes_needed)
+ == bytes_needed) {
+ rand_pool_add_end(pool, bytes_needed, 8 * bytes_needed);
+ }
+ } else {
+ rand_pool_add_end(pool, 0, 0);
+ }
}
}
- return 0;
+ return rand_pool_entropy_available(pool);
}
#endif
-
+#if 0
/*
- * DRBG has two sets of callbacks; we only discuss the "entropy" one
- * here. When the DRBG needs additional randomness bits (called entropy
- * in the NIST document), it calls the get_entropy callback which fills in
- * a pointer and returns the number of bytes. When the DRBG is finished with
- * the buffer, it calls the cleanup_entropy callback, with the value of
- * the buffer that the get_entropy callback filled in.
+ * Implements the get_entropy() callback (see RAND_DRBG_set_callbacks())
+ *
+ * If the DRBG has a parent, then the required amount of entropy input
+ * is fetched using the parent's RAND_DRBG_generate().
*
- * Get entropy from the system, via RAND_poll if needed. The |entropy|
- * is the bits of randomness required, and is expected to fit into a buffer
- * of |min_len|..|max__len| size. We assume we're getting high-quality
- * randomness from the system, and that |min_len| bytes will do.
+ * Otherwise, the entropy is polled from the system entropy sources
+ * using rand_pool_acquire_entropy().
+ *
+ * If a random pool has been added to the DRBG using RAND_add(), then
+ * its entropy will be used up first.
*/
-size_t drbg_entropy_from_system(RAND_DRBG *drbg,
- unsigned char **pout,
- int entropy, size_t min_len, size_t max_len)
+size_t rand_drbg_get_entropy(RAND_DRBG *drbg,
+ unsigned char **pout,
+ int entropy, size_t min_len, size_t max_len,
+ int prediction_resistance)
{
- int i;
-
-
- if (min_len > (size_t)drbg->size) {
- /* Should not happen. See comment near RANDOMNESS_NEEDED. */
- min_len = drbg->size;
+ size_t ret = 0;
+ size_t entropy_available = 0;
+ RAND_POOL *pool;
+
+ if (drbg->parent != NULL && drbg->strength > drbg->parent->strength) {
+ /*
+ * We currently don't support the algorithm from NIST SP 800-90C
+ * 10.1.2 to use a weaker DRBG as source
+ */
+ RANDerr(RAND_F_RAND_DRBG_GET_ENTROPY, RAND_R_PARENT_STRENGTH_TOO_WEAK);
+ return 0;
}
- if (drbg->filled) {
- /* Re-use what we have. */
- *pout = drbg->randomness;
- return drbg->size;
+ if (drbg->seed_pool != NULL) {
+ pool = drbg->seed_pool;
+ pool->entropy_requested = entropy;
+ } else {
+ pool = rand_pool_new(entropy, drbg->secure, min_len, max_len);
+ if (pool == NULL)
+ return 0;
}
- /* If we don't have enough, try to get more. */
- CRYPTO_THREAD_write_lock(rand_bytes.lock);
- for (i = RAND_POLL_RETRIES; rand_bytes.curr < min_len && --i >= 0; ) {
- CRYPTO_THREAD_unlock(rand_bytes.lock);
- RAND_poll();
- CRYPTO_THREAD_write_lock(rand_bytes.lock);
- }
+ if (drbg->parent != NULL) {
+ size_t bytes_needed = rand_pool_bytes_needed(pool, 1 /*entropy_factor*/);
+ unsigned char *buffer = rand_pool_add_begin(pool, bytes_needed);
+
+ if (buffer != NULL) {
+ size_t bytes = 0;
+
+ /*
+ * Get random data from parent. Include our address as additional input,
+ * in order to provide some additional distinction between different
+ * DRBG child instances.
+ * Our lock is already held, but we need to lock our parent before
+ * generating bits from it. (Note: taking the lock will be a no-op
+ * if locking if drbg->parent->lock == NULL.)
+ */
+ rand_drbg_lock(drbg->parent);
+ if (RAND_DRBG_generate(drbg->parent,
+ buffer, bytes_needed,
+ prediction_resistance,
+ (unsigned char *)&drbg, sizeof(drbg)) != 0)
+ bytes = bytes_needed;
+ drbg->reseed_next_counter
+ = tsan_load(&drbg->parent->reseed_prop_counter);
+ rand_drbg_unlock(drbg->parent);
+
+ rand_pool_add_end(pool, bytes, 8 * bytes);
+ entropy_available = rand_pool_entropy_available(pool);
+ }
- /* Get desired amount, but no more than we have. */
- if (min_len > rand_bytes.curr)
- min_len = rand_bytes.curr;
- if (min_len != 0) {
- memcpy(drbg->randomness, rand_bytes.buff, min_len);
- drbg->filled = 1;
- /* Update amount left and shift it down. */
- rand_bytes.curr -= min_len;
- if (rand_bytes.curr != 0)
- memmove(rand_bytes.buff, &rand_bytes.buff[min_len], rand_bytes.curr);
+ } else {
+ /* Get entropy by polling system entropy sources. */
+ entropy_available = rand_pool_acquire_entropy(pool);
}
- CRYPTO_THREAD_unlock(rand_bytes.lock);
- *pout = drbg->randomness;
- return min_len;
-}
-size_t drbg_entropy_from_parent(RAND_DRBG *drbg,
- unsigned char **pout,
- int entropy, size_t min_len, size_t max_len)
-{
- int st;
-
- if (min_len > (size_t)drbg->size) {
- /* Should not happen. See comment near RANDOMNESS_NEEDED. */
- min_len = drbg->size;
+ if (entropy_available > 0) {
+ ret = rand_pool_length(pool);
+ *pout = rand_pool_detach(pool);
}
- /* Get random from parent, include our state as additional input. */
- st = RAND_DRBG_generate(drbg->parent, drbg->randomness, min_len, 0,
- (unsigned char *)drbg, sizeof(*drbg));
- if (st == 0)
- return 0;
- drbg->filled = 1;
- *pout = drbg->randomness;
- return min_len;
+ if (drbg->seed_pool == NULL)
+ rand_pool_free(pool);
+ return ret;
}
-void drbg_release_entropy(RAND_DRBG *drbg, unsigned char *out)
+/*
+ * Implements the cleanup_entropy() callback (see RAND_DRBG_set_callbacks())
+ *
+ */
+void rand_drbg_cleanup_entropy(RAND_DRBG *drbg,
+ unsigned char *out, size_t outlen)
{
- drbg->filled = 0;
- OPENSSL_cleanse(drbg->randomness, drbg->size);
+ if (drbg->seed_pool == NULL) {
+ if (drbg->secure)
+ OPENSSL_secure_clear_free(out, outlen);
+ else
+ OPENSSL_clear_free(out, outlen);
+ }
}
-
/*
- * Set up a global DRBG.
+ * Generate additional data that can be used for the drbg. The data does
+ * not need to contain entropy, but it's useful if it contains at least
+ * some bits that are unpredictable.
+ *
+ * Returns 0 on failure.
+ *
+ * On success it allocates a buffer at |*pout| and returns the length of
+ * the data. The buffer should get freed using OPENSSL_secure_clear_free().
*/
-static int setup_drbg(RAND_DRBG *drbg)
+size_t rand_drbg_get_additional_data(RAND_POOL *pool, unsigned char **pout)
{
- int ret = 1;
-
- drbg->lock = CRYPTO_THREAD_lock_new();
- ret &= drbg->lock != NULL;
- drbg->size = RANDOMNESS_NEEDED;
- drbg->secure = CRYPTO_secure_malloc_initialized();
- drbg->randomness = drbg->secure
- ? OPENSSL_secure_malloc(drbg->size)
- : OPENSSL_malloc(drbg->size);
- ret &= drbg->randomness != NULL;
- /* If you change these parameters, see RANDOMNESS_NEEDED */
- ret &= RAND_DRBG_set(drbg,
- NID_aes_128_ctr, RAND_DRBG_FLAG_CTR_USE_DF) == 1;
- ret &= RAND_DRBG_set_callbacks(drbg, drbg_entropy_from_system,
- drbg_release_entropy, NULL, NULL) == 1;
- return ret;
-}
+ size_t ret = 0;
-static void free_drbg(RAND_DRBG *drbg)
-{
- CRYPTO_THREAD_lock_free(drbg->lock);
- if (drbg->secure)
- OPENSSL_secure_clear_free(drbg->randomness, drbg->size);
- else
- OPENSSL_clear_free(drbg->randomness, drbg->size);
- RAND_DRBG_uninstantiate(drbg);
+ if (rand_pool_add_additional_data(pool) == 0)
+ goto err;
+
+ ret = rand_pool_length(pool);
+ *pout = rand_pool_detach(pool);
+
+ err:
+ return ret;
}
-void rand_fork()
+void rand_drbg_cleanup_additional_data(RAND_POOL *pool, unsigned char *out)
{
- rand_fork_count++;
+ rand_pool_reattach(pool, out);
}
+#endif
+#ifndef FIPS_MODULE
DEFINE_RUN_ONCE_STATIC(do_rand_init)
{
- int ret = 1;
-
-#ifndef OPENSSL_NO_ENGINE
+# ifndef OPENSSL_NO_ENGINE
rand_engine_lock = CRYPTO_THREAD_lock_new();
- ret &= rand_engine_lock != NULL;
-#endif
+ if (rand_engine_lock == NULL)
+ return 0;
+# endif
+
rand_meth_lock = CRYPTO_THREAD_lock_new();
- ret &= rand_meth_lock != NULL;
-
- rand_bytes.lock = CRYPTO_THREAD_lock_new();
- ret &= rand_bytes.lock != NULL;
- rand_bytes.curr = 0;
- rand_bytes.size = MAX_RANDOMNESS_HELD;
- rand_bytes.secure = CRYPTO_secure_malloc_initialized();
- rand_bytes.buff = rand_bytes.secure
- ? OPENSSL_secure_malloc(rand_bytes.size)
- : OPENSSL_malloc(rand_bytes.size);
- ret &= rand_bytes.buff != NULL;
- ret &= setup_drbg(&rand_drbg);
- ret &= setup_drbg(&priv_drbg);
- return ret;
+ if (rand_meth_lock == NULL)
+ goto err;
+
+ if (!rand_pool_init())
+ goto err;
+
+ rand_inited = 1;
+ return 1;
+
+ err:
+ CRYPTO_THREAD_lock_free(rand_meth_lock);
+ rand_meth_lock = NULL;
+# ifndef OPENSSL_NO_ENGINE
+ CRYPTO_THREAD_lock_free(rand_engine_lock);
+ rand_engine_lock = NULL;
+# endif
+ return 0;
}
void rand_cleanup_int(void)
{
const RAND_METHOD *meth = default_RAND_meth;
+ if (!rand_inited)
+ return;
+
if (meth != NULL && meth->cleanup != NULL)
meth->cleanup();
RAND_set_rand_method(NULL);
-#ifndef OPENSSL_NO_ENGINE
+ rand_pool_cleanup();
+# ifndef OPENSSL_NO_ENGINE
CRYPTO_THREAD_lock_free(rand_engine_lock);
-#endif
+ rand_engine_lock = NULL;
+# endif
CRYPTO_THREAD_lock_free(rand_meth_lock);
- CRYPTO_THREAD_lock_free(rand_bytes.lock);
- if (rand_bytes.secure)
- OPENSSL_secure_clear_free(rand_bytes.buff, rand_bytes.size);
- else
- OPENSSL_clear_free(rand_bytes.buff, rand_bytes.size);
- free_drbg(&rand_drbg);
- free_drbg(&priv_drbg);
+ rand_meth_lock = NULL;
+ rand_inited = 0;
}
+/* TODO(3.0): Do we need to handle this somehow in the FIPS module? */
/*
- * RAND_poll_ex() gets a function pointer to call when it has random bytes.
- * RAND_poll() sets the function pointer to be a wrapper that calls RAND_add().
+ * RAND_close_seed_files() ensures that any seed file descriptors are
+ * closed after use.
*/
-static void call_rand_add(void* arg, const void *buf, int num, double r)
+void RAND_keep_random_devices_open(int keep)
{
- RAND_add(buf, num, r);
+ if (RUN_ONCE(&rand_init, do_rand_init))
+ rand_pool_keep_random_devices_open(keep);
}
+/*
+ * RAND_poll() reseeds the default RNG using random input
+ *
+ * The random input is obtained from polling various entropy
+ * sources which depend on the operating system and are
+ * configurable via the --with-rand-seed configure option.
+ */
int RAND_poll(void)
{
- return RAND_poll_ex(call_rand_add, NULL);
+ int ret = 0;
+
+ const RAND_METHOD *meth = RAND_get_rand_method();
+
+ if (meth == NULL)
+ return 0;
+
+ if (meth == RAND_OpenSSL()) {
+ /* fill random pool and seed the master DRBG */
+ RAND_DRBG *drbg = RAND_DRBG_get0_master();
+
+ if (drbg == NULL)
+ return 0;
+
+#if 0
+ ret = rand_drbg_restart(drbg, NULL, 0, 0);
+#endif
+
+ return ret;
+
+ } else {
+ RAND_POOL *pool = NULL;
+
+ /* fill random pool and seed the current legacy RNG */
+ pool = rand_pool_new(RAND_DRBG_STRENGTH, 1,
+ (RAND_DRBG_STRENGTH + 7) / 8,
+ RAND_POOL_MAX_LENGTH);
+ if (pool == NULL)
+ return 0;
+#if 0
+ if (rand_pool_acquire_entropy(pool) == 0)
+ goto err;
+#endif
+ if (meth->add == NULL
+ || meth->add(rand_pool_buffer(pool),
+ rand_pool_length(pool),
+ (rand_pool_entropy(pool) / 8.0)) == 0)
+ goto err;
+
+ ret = 1;
+
+ err:
+ rand_pool_free(pool);
+ }
+
+ return ret;
}
int RAND_set_rand_method(const RAND_METHOD *meth)
return 0;
CRYPTO_THREAD_write_lock(rand_meth_lock);
-#ifndef OPENSSL_NO_ENGINE
+# ifndef OPENSSL_NO_ENGINE
ENGINE_finish(funct_ref);
funct_ref = NULL;
-#endif
+# endif
default_RAND_meth = meth;
CRYPTO_THREAD_unlock(rand_meth_lock);
return 1;
}
+#endif /* FIPS_MODULE */
const RAND_METHOD *RAND_get_rand_method(void)
{
+#ifdef FIPS_MODULE
+ return NULL;
+#else
const RAND_METHOD *tmp_meth = NULL;
if (!RUN_ONCE(&rand_init, do_rand_init))
CRYPTO_THREAD_write_lock(rand_meth_lock);
if (default_RAND_meth == NULL) {
-#ifndef OPENSSL_NO_ENGINE
+# ifndef OPENSSL_NO_ENGINE
ENGINE *e;
/* If we have an engine that can do RAND, use it. */
ENGINE_finish(e);
default_RAND_meth = &rand_meth;
}
-#else
+# else
default_RAND_meth = &rand_meth;
-#endif
+# endif
}
tmp_meth = default_RAND_meth;
CRYPTO_THREAD_unlock(rand_meth_lock);
return tmp_meth;
+#endif
}
-#ifndef OPENSSL_NO_ENGINE
+#if !defined(OPENSSL_NO_ENGINE) && !defined(FIPS_MODULE)
int RAND_set_rand_engine(ENGINE *engine)
{
const RAND_METHOD *tmp_meth = NULL;
{
const RAND_METHOD *meth = RAND_get_rand_method();
- if (meth->seed != NULL)
+ if (meth != NULL && meth->seed != NULL)
meth->seed(buf, num);
}
{
const RAND_METHOD *meth = RAND_get_rand_method();
- if (meth->add != NULL)
+ if (meth != NULL && meth->add != NULL)
meth->add(buf, num, randomness);
}
* the default method, then just call RAND_bytes(). Otherwise make
* sure we're instantiated and use the private DRBG.
*/
-int RAND_priv_bytes(unsigned char *buf, int num)
+int RAND_priv_bytes_ex(OPENSSL_CTX *ctx, unsigned char *buf, int num)
{
+ RAND_DRBG *drbg;
const RAND_METHOD *meth = RAND_get_rand_method();
- if (meth != RAND_OpenSSL())
- return RAND_bytes(buf, num);
+ if (meth != NULL && meth != RAND_OpenSSL()) {
+ if (meth->bytes != NULL)
+ return meth->bytes(buf, num);
+ RANDerr(RAND_F_RAND_PRIV_BYTES_EX, RAND_R_FUNC_NOT_IMPLEMENTED);
+ return -1;
+ }
- if (priv_drbg.state == DRBG_UNINITIALISED
- && RAND_DRBG_instantiate(&priv_drbg, NULL, 0) == 0)
- return 0;
- return RAND_DRBG_generate(&priv_drbg, buf, num, 0, NULL, 0);
+ drbg = OPENSSL_CTX_get0_private_drbg(ctx);
+ if (drbg != NULL)
+ return RAND_DRBG_bytes(drbg, buf, num);
+ return 0;
}
-int RAND_bytes(unsigned char *buf, int num)
+int RAND_priv_bytes(unsigned char *buf, int num)
{
+ return RAND_priv_bytes_ex(NULL, buf, num);
+}
+
+int RAND_bytes_ex(OPENSSL_CTX *ctx, unsigned char *buf, int num)
+{
+ RAND_DRBG *drbg;
const RAND_METHOD *meth = RAND_get_rand_method();
- if (meth->bytes != NULL)
- return meth->bytes(buf, num);
- RANDerr(RAND_F_RAND_BYTES, RAND_R_FUNC_NOT_IMPLEMENTED);
- return -1;
+ if (meth != NULL && meth != RAND_OpenSSL()) {
+ if (meth->bytes != NULL)
+ return meth->bytes(buf, num);
+ RANDerr(RAND_F_RAND_BYTES_EX, RAND_R_FUNC_NOT_IMPLEMENTED);
+ return -1;
+ }
+
+ drbg = OPENSSL_CTX_get0_public_drbg(ctx);
+ if (drbg != NULL)
+ return RAND_DRBG_bytes(drbg, buf, num);
+
+ return 0;
+}
+
+int RAND_bytes(unsigned char *buf, int num)
+{
+ return RAND_bytes_ex(NULL, buf, num);
}
-#if OPENSSL_API_COMPAT < 0x10100000L
+#if !defined(OPENSSL_NO_DEPRECATED_1_1_0) && !defined(FIPS_MODULE)
int RAND_pseudo_bytes(unsigned char *buf, int num)
{
const RAND_METHOD *meth = RAND_get_rand_method();
- if (meth->pseudorand != NULL)
+ if (meth != NULL && meth->pseudorand != NULL)
return meth->pseudorand(buf, num);
+ RANDerr(RAND_F_RAND_PSEUDO_BYTES, RAND_R_FUNC_NOT_IMPLEMENTED);
return -1;
}
#endif
{
const RAND_METHOD *meth = RAND_get_rand_method();
- if (meth->status != NULL)
+ if (meth != NULL && meth->status != NULL)
return meth->status();
return 0;
}