$! It was re-written so it would try to determine what "C" compiler to use
$! or you can specify which "C" compiler to use.
$!
-$! Specify RSAREF as P1 to compile with the RSAREF library instead of
+$! Specify the following as P1 to build just that part or ALL to just
+$! build everything.
+$!
+$! LIBRARY To just compile the [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
+$! APPS To just compile the [.xxx.EXE.CRYPTO]*.EXE
+$! ALL To do both LIBRARY and APPS
+$!
+$! Specify RSAREF as P2 to compile with the RSAREF library instead of
$! the regular one. If you specify NORSAREF it will compile with the
$! regular RSAREF routines. (Note: If you are in the United States
$! you MUST compile with RSAREF unless you have a license from RSA).
$! into the [.RSAREF] directory under the root directory as that
$! is where the scripts will look for the files.
$!
-$! Specify DEBUG or NODEBUG as P2 to compile with or without debugger
+$! Specify DEBUG or NODEBUG as P3 to compile with or without debugger
$! information.
$!
-$! Specify which compiler at P3 to try to compile under.
+$! Specify which compiler at P4 to try to compile under.
$!
$! VAXC For VAX C.
$! DECC For DEC C.
$! If you don't speficy a compiler, it will try to determine which
$! "C" compiler to use.
$!
-$! P4, if defined, sets a TCP/IP library to use, through one of the following
+$! P5, if defined, sets a TCP/IP library to use, through one of the following
$! keywords:
$!
$! UCX for UCX
$! SOCKETSHR for SOCKETSHR+NETLIB
$!
-$! P5, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
+$! P6, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
$!
-$! P6, if defined, sets a choice of crypto methods to compile.
+$! P7, if defined, sets a choice of crypto methods to compile.
$! WARNING: this should only be done to recompile some part of an already
$! fully compiled library.
$!
$!
$! Define The Different Encryption Types.
$!
-$ ENCRYPT_TYPES = ",MD2,MD5,SHA,MDC2,HMAC,RIPEMD,"+ -
+$ ENCRYPT_TYPES = "Basic,MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,"+ -
"DES,RC2,RC4,RC5,IDEA,BF,CAST,"+ -
- "BN,RSA,DSA,DH,"+ -
+ "BN,EC,RSA,DSA,DH,DSO,ENGINE,AES,"+ -
"BUFFER,BIO,STACK,LHASH,RAND,ERR,OBJECTS,"+ -
"EVP,EVP_2,ASN1,ASN1_2,PEM,X509,X509V3,"+ -
- "CONF,TXT_DB,PKCS7,PKCS12,COMP"
+ "CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5"
+$ ENCRYPT_PROGRAMS = "DES,PKCS7"
$!
$! Check To Make Sure We Have Valid Command Line Parameters.
$!
$!
$ LIB_NAME := 'EXE_DIR'LIBCRYPTO.OLB
$!
+$! Define The CRYPTO-LIB We Are To Use.
+$!
+$ CRYPTO_LIB := 'EXE_DIR'LIBCRYPTO.OLB
+$!
+$! Define The RSAREF-LIB We Are To Use.
+$!
+$ RSAREF_LIB := SYS$DISK:[-.'ARCH'.EXE.RSAREF]LIBRSAGLUE.OLB
+$!
$! Check To See If We Already Have A "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" Library...
$!
$ IF (F$SEARCH(LIB_NAME).EQS."")
$!
$ ENDIF
$!
+$! Build our options file for the application
+$!
+$ GOSUB CHECK_OPT_FILE
+$!
$! Define The Different Encryption "library" Strings.
$!
-$ LIB_ = "cryptlib,mem,cversion,ex_data,tmdiff,cpt_err"
+$ APPS_DES = "DES/DES,CBC3_ENC"
+$ APPS_PKCS7 = "ENC/ENC;DEC/DEC;SIGN/SIGN;VERIFY/VERIFY,EXAMPLE"
+$
+$ LIB_ = "cryptlib,mem,mem_dbg,cversion,ex_data,tmdiff,cpt_err,ebcdic,uid,o_time"
$ LIB_MD2 = "md2_dgst,md2_one"
+$ LIB_MD4 = "md4_dgst,md4_one"
$ LIB_MD5 = "md5_dgst,md5_one"
$ LIB_SHA = "sha_dgst,sha1dgst,sha_one,sha1_one"
$ LIB_MDC2 = "mdc2dgst,mdc2_one"
"ecb3_enc,cfb64enc,cfb64ede,cfb_enc,ofb64ede,"+ -
"enc_read,enc_writ,ofb64enc,"+ -
"ofb_enc,str2key,pcbc_enc,qud_cksm,rand_key,"+ -
- "des_enc,fcrypt_b,read2pwd,"+ -
- "fcrypt,xcbc_enc,read_pwd,rpc_enc,cbc_cksm,supp,ede_cbcm_enc"
+ "des_enc,fcrypt_b,"+ -
+ "fcrypt,xcbc_enc,rpc_enc,cbc_cksm,"+ -
+ "ede_cbcm_enc,des_old,des_old2,read2pwd"
$ LIB_RC2 = "rc2_ecb,rc2_skey,rc2_cbc,rc2cfb64,rc2ofb64"
$ LIB_RC4 = "rc4_skey,rc4_enc"
$ LIB_RC5 = "rc5_skey,rc5_ecb,rc5_enc,rc5cfb64,rc5ofb64"
$ LIB_BF = "bf_skey,bf_ecb,bf_enc,bf_cfb64,bf_ofb64"
$ LIB_CAST = "c_skey,c_ecb,c_enc,c_cfb64,c_ofb64"
$ LIB_BN_ASM = "[.asm]vms.mar,vms-helper"
-$ IF F$TRNLNM("OPENSSL_NO_ASM") .NES. "" THEN LIB_BN_ASM = "bn_asm"
-$ LIB_BN = "bn_add,bn_div,bn_exp,bn_lib,bn_mul,"+ -
+$ IF F$TRNLNM("OPENSSL_NO_ASM").OR.ARCH.EQS."AXP" THEN LIB_BN_ASM = "bn_asm"
+$ LIB_BN = "bn_add,bn_div,bn_exp,bn_lib,bn_ctx,bn_mul,bn_mod,"+ -
"bn_print,bn_rand,bn_shift,bn_word,bn_blind,"+ -
- "bn_gcd,bn_prime,bn_err,bn_sqr,"+LIB_BN_ASM+",bn_recp,bn_mont,"+ -
- "bn_mpi,bn_exp2"
+ "bn_kron,bn_sqrt,bn_gcd,bn_prime,bn_err,bn_sqr,"+LIB_BN_ASM+","+ -
+ "bn_recp,bn_mont,bn_mpi,bn_exp2"
$ LIB_RSA = "rsa_eay,rsa_gen,rsa_lib,rsa_sign,rsa_saos,rsa_err,"+ -
- "rsa_pk1,rsa_ssl,rsa_none,rsa_oaep,rsa_chk"
-$ LIB_DSA = "dsa_gen,dsa_key,dsa_lib,dsa_asn1,dsa_vrf,dsa_sign,dsa_err"
-$ LIB_DH = "dh_gen,dh_key,dh_lib,dh_check,dh_err"
+ "rsa_pk1,rsa_ssl,rsa_none,rsa_oaep,rsa_chk,rsa_null,"+ -
+ "rsa_asn1"
+$ LIB_EC = "ec_lib,ecp_smpl,ecp_mont,ecp_recp,ecp_nist,ec_cvt,ec_mult,"+ -
+ "ec_err"
+$ LIB_DSA = "dsa_gen,dsa_key,dsa_lib,dsa_asn1,dsa_vrf,dsa_sign,dsa_err,dsa_ossl"
+$ LIB_DH = "dh_asn1,dh_gen,dh_key,dh_lib,dh_check,dh_err"
+$ LIB_DSO = "dso_dl,dso_dlfcn,dso_err,dso_lib,dso_null,"+ -
+ "dso_openssl,dso_win32,dso_vms"
+$ LIB_ENGINE = "eng_err,eng_lib,eng_list,eng_init,eng_ctrl,"+ -
+ "eng_table,eng_pkey,eng_fat,eng_all,"+ -
+ "tb_rsa,tb_dsa,tb_dh,tb_rand,tb_cipher,tb_digest,"+ -
+ "eng_openssl,eng_dyn,eng_cnf,"+ -
+ "hw_atalla,hw_cswift,hw_ncipher,hw_nuron,hw_ubsec,"+ -
+ "hw_openbsd_dev_crypto,hw_aep,hw_sureware,hw_4758_cca"
+$ LIB_AES = "aes_core,aes_misc,aes_ecb,aes_cbc,aes_cfb,aes_ofb,aes_ctr"
$ LIB_BUFFER = "buffer,buf_err"
$ LIB_BIO = "bio_lib,bio_cb,bio_err,"+ -
"bss_mem,bss_null,bss_fd,"+ -
"bss_file,bss_sock,bss_conn,"+ -
"bf_null,bf_buff,b_print,b_dump,"+ -
- "b_sock,bss_acpt,bf_nbio,bss_rtcp,bss_bio" ! + ",bss_log" for syslog
+ "b_sock,bss_acpt,bf_nbio,bss_rtcp,bss_bio,bss_log,"+ -
+ "bf_lbuf"
$ LIB_STACK = "stack"
$ LIB_LHASH = "lhash,lh_stats"
-$ LIB_RAND = "md_rand,randfile,rand_lib"
+$ LIB_RAND = "md_rand,randfile,rand_lib,rand_err,rand_egd,"+ -
+ "rand_vms"
$ LIB_ERR = "err,err_all,err_prn"
$ LIB_OBJECTS = "o_names,obj_dat,obj_lib,obj_err"
$ LIB_EVP = "encode,digest,evp_enc,evp_key,"+ -
- "e_ecb_d,e_cbc_d,e_cfb_d,e_ofb_d,"+ -
- "e_ecb_i,e_cbc_i,e_cfb_i,e_ofb_i,"+ -
- "e_ecb_3d,e_cbc_3d,e_rc4,names,"+ -
- "e_cfb_3d,e_ofb_3d,e_xcbc_d,"+ -
- "e_ecb_r2,e_cbc_r2,e_cfb_r2,e_ofb_r2,"+ -
- "e_ecb_bf,e_cbc_bf,e_cfb_bf,e_ofb_bf"
-$ LIB_EVP_2 = "e_ecb_c,e_cbc_c,e_cfb_c,e_ofb_c,"+ -
- "e_ecb_r5,e_cbc_r5,e_cfb_r5,e_ofb_r5,"+ -
- "m_null,m_md2,m_md5,m_sha,m_sha1,m_dss,m_dss1,m_mdc2,"+ -
- "m_ripemd,"+ -
+ "e_des,e_bf,e_idea,e_des3,"+ -
+ "e_rc4,e_aes,names,"+ -
+ "e_xcbc_d,e_rc2,e_cast,e_rc5"
+$ LIB_EVP_2 = "m_null,m_md2,m_md4,m_md5,m_sha,m_sha1," + -
+ "m_dss,m_dss1,m_mdc2,m_ripemd,"+ -
"p_open,p_seal,p_sign,p_verify,p_lib,p_enc,p_dec,"+ -
"bio_md,bio_b64,bio_enc,evp_err,e_null,"+ -
- "c_all,evp_lib,bio_ok,evp_pkey,evp_pbe,p5_crpt,p5_crpt2"
+ "c_all,c_allc,c_alld,evp_lib,bio_ok,"+-
+ "evp_pkey,evp_pbe,p5_crpt,p5_crpt2"
$ LIB_ASN1 = "a_object,a_bitstr,a_utctm,a_gentm,a_time,a_int,a_octet,"+ -
- "a_print,a_type,a_set,a_dup,a_d2i_fp,a_i2d_fp,a_bmp,"+ -
- "a_enum,a_vis,a_utf8,a_sign,a_digest,a_verify,"+ -
- "x_algor,x_val,x_pubkey,x_sig,x_req,x_attrib,"+ -
- "x_name,x_cinf,x_x509,x_crl,x_info,x_spki,nsseq,"+ -
- "d2i_r_pr,i2d_r_pr,d2i_r_pu,i2d_r_pu,"+ -
- "d2i_s_pr,i2d_s_pr,d2i_s_pu,i2d_s_pu,"+ -
+ "a_print,a_type,a_set,a_dup,a_d2i_fp,a_i2d_fp,"+ -
+ "a_enum,a_utf8,a_sign,a_digest,a_verify,a_mbstr,a_strex,"+ -
+ "x_algor,x_val,x_pubkey,x_sig,x_req,x_attrib,x_bignum,"+ -
+ "x_long,x_name,x_x509,x_x509a,x_crl,x_info,x_spki,nsseq,"+ -
"d2i_pu,d2i_pr,i2d_pu,i2d_pr"
-$ LIB_ASN1_2 = "t_req,t_x509,t_crl,t_pkey,"+ -
- "p7_i_s,p7_signi,p7_signd,p7_recip,p7_enc_c,p7_evp,"+ -
- "p7_dgst,p7_s_e,p7_enc,p7_lib,"+ -
- "f_int,f_string,i2d_dhp,i2d_dsap,d2i_dhp,d2i_dsap,n_pkey,"+ -
+$ LIB_ASN1_2 = "t_req,t_x509,t_x509a,t_crl,t_pkey,t_spki,t_bitst,"+ -
+ "tasn_new,tasn_fre,tasn_enc,tasn_dec,tasn_utl,tasn_typ,"+ -
+ "f_int,f_string,n_pkey,"+ -
"f_enum,a_hdr,x_pkey,a_bool,x_exten,"+ -
- "asn1_par,asn1_lib,asn1_err,a_meth,a_bytes,"+ -
- "evp_asn1,asn_pack,p5_pbe,p5_pbev2,p8_pkey"
-$ LIB_PEM = "pem_sign,pem_seal,pem_info,pem_lib,pem_all,pem_err"
+ "asn1_par,asn1_lib,asn1_err,a_meth,a_bytes,a_strnid,"+ -
+ "evp_asn1,asn_pack,p5_pbe,p5_pbev2,p8_pkey,asn_moid"
+$ LIB_PEM = "pem_sign,pem_seal,pem_info,pem_lib,pem_all,pem_err,"+ -
+ "pem_x509,pem_xaux,pem_oth,pem_pk8,pem_pkey"
$ LIB_X509 = "x509_def,x509_d2,x509_r2x,x509_cmp,"+ -
- "x509_obj,x509_req,x509_vfy,"+ -
- "x509_set,x509rset,x509_err,"+ -
- "x509name,x509_v3,x509_ext,"+ -
+ "x509_obj,x509_req,x509spki,x509_vfy,"+ -
+ "x509_set,x509cset,x509rset,x509_err,"+ -
+ "x509name,x509_v3,x509_ext,x509_att,"+ -
"x509type,x509_lu,x_all,x509_txt,"+ -
- "by_file,by_dir"
+ "x509_trs,by_file,by_dir"
$ LIB_X509V3 = "v3_bcons,v3_bitst,v3_conf,v3_extku,v3_ia5,v3_lib,"+ -
"v3_prn,v3_utl,v3err,v3_genn,v3_alt,v3_skey,v3_akey,v3_pku,"+ -
- "v3_int,v3_enum,v3_sxnet,v3_cpols,v3_crld"
-$ LIB_CONF = "conf,conf_err"
+ "v3_int,v3_enum,v3_sxnet,v3_cpols,v3_crld,v3_purp,v3_info,"+ -
+ "v3_ocsp,v3_akeya"
+$ LIB_CONF = "conf_err,conf_lib,conf_api,conf_def,conf_mod,conf_mall"
$ LIB_TXT_DB = "txt_db"
-$ LIB_PKCS7 = "pk7_lib,pkcs7err,pk7_doit"
-$ LIB_PKCS12 = "p12_add,p12_attr,p12_bags,p12_crpt,p12_crt,p12_decr,"+ -
- "p12_init,p12_key,p12_kiss,p12_lib,p12_mac,p12_mutl,"+ -
- "p12_sbag,p12_utl,pk12err"
+$ LIB_PKCS7 = "pk7_asn1,pk7_lib,pkcs7err,pk7_doit,pk7_smime,pk7_attr,"+ -
+ "pk7_mime"
+$ LIB_PKCS12 = "p12_add,p12_asn,p12_attr,p12_crpt,p12_crt,p12_decr,"+ -
+ "p12_init,p12_key,p12_kiss,p12_mutl,"+ -
+ "p12_utl,p12_npas,pk12err,p12_p8d,p12_p8e"
$ LIB_COMP = "comp_lib,"+ -
"c_rle,c_zlib"
+$ LIB_OCSP = "ocsp_asn,ocsp_ext,ocsp_ht,ocsp_lib,ocsp_cl,"+ -
+ "ocsp_srv,ocsp_prn,ocsp_vfy,ocsp_err"
+$ LIB_UI_COMPAT = ",ui_compat"
+$ LIB_UI = "ui_err,ui_lib,ui_openssl,ui_util"+LIB_UI_COMPAT
+$ LIB_KRB5 = "krb5_asn"
$!
$! Setup exceptional compilations
$!
$ COMPILEWITH_CC3 = ",bss_rtcp,"
-$ COMPILEWITH_CC4 = ",a_utctm,"
-$ COMPILEWITH_CC5 = ",md2_dgst,md5_dgst,mdc2dgst,sha_dgst,sha1dgst," + -
- "rmd_dgst,bf_enc,"
+$ COMPILEWITH_CC4 = ",a_utctm,bss_log,o_time,"
+$ COMPILEWITH_CC5 = ",md2_dgst,md4_dgst,md5_dgst,mdc2dgst," + -
+ "sha_dgst,sha1dgst,rmd_dgst,bf_enc,"
$!
$! Check To See If We Are Going To Use RSAREF.
$!
-$ IF (RSAREF.EQS."TRUE" .AND. ENCRYPT_TYPES - "RSA".NES.ENCRYPT_TYPES)
+$ IF (RSAREF.EQS."TRUE" .AND. ENCRYPT_TYPES - "RSA".NES.ENCRYPT_TYPES -
+ .AND. (BUILDALL .EQS. "TRUE" .OR. BUILDALL .EQS. "LIBRARY"))
$ THEN
$!
$! Check To See If The File [-.RSAREF]RSAREF.C Is Actually There.
$ IF (F$SEARCH("SYS$DISK:[-.RSAREF]RSAREF.C").EQS."")
$ THEN
$!
-$! Tell The User That The File Dosen't Exist.
+$! Tell The User That The File Doesn't Exist.
$!
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The File [-.RSAREF]RSAREF.C Dosen't Exist."
+$ WRITE SYS$OUTPUT "The File [-.RSAREF]RSAREF.C Doesn't Exist."
$ WRITE SYS$OUTPUT ""
$!
$! Exit The Build.
$ IF (F$SEARCH("SYS$DISK:[-.RSAREF]RSAR_ERR.C").EQS."")
$ THEN
$!
-$! Tell The User That The File Dosen't Exist.
+$! Tell The User That The File Doesn't Exist.
$!
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The File [-.RSAREF]RSAR_ERR.C Dosen't Exist."
+$ WRITE SYS$OUTPUT "The File [-.RSAREF]RSAR_ERR.C Doesn't Exist."
$ WRITE SYS$OUTPUT ""
$!
$! Exit The Build.
$! Extract The Module Name From The Encryption List.
$!
$ MODULE_NAME = F$ELEMENT(MODULE_COUNTER,",",ENCRYPT_TYPES)
+$ IF MODULE_NAME.EQS."Basic" THEN MODULE_NAME = ""
+$ MODULE_NAME1 = MODULE_NAME
$!
$! Check To See If We Are At The End Of The Module List.
$!
$!
$ MODULE_COUNTER = MODULE_COUNTER + 1
$!
-$! Tell The User What Module We Are Building.
-$!
-$ IF (MODULE_NAME.NES."")
-$ THEN
-$ WRITE SYS$OUTPUT "Compiling The ",MODULE_NAME," Files."
-$ ENDIF
-$!
-$! Define A File Counter And Set It To "0".
-$!
-$ FILE_COUNTER = 0
-$!
-$! Create The Library Module Name.
+$! Create The Library and Apps Module Names.
$!
$ LIB_MODULE = "LIB_" + MODULE_NAME
+$ APPS_MODULE = "APPS_" + MODULE_NAME
$ IF (MODULE_NAME.EQS."ASN1_2")
$ THEN
$ MODULE_NAME = "ASN1"
$ MODULE_NAME = "EVP"
$ ENDIF
$!
+$! Set state (can be LIB and APPS)
+$!
+$ STATE = "LIB"
+$ IF BUILDALL .EQS. "APPS" THEN STATE = "APPS"
+$!
$! Check if the library module name actually is defined
$!
$ IF F$TYPE('LIB_MODULE') .EQS. ""
$ GOTO MODULE_NEXT
$ ENDIF
$!
+$! Top Of The Module Loop.
+$!
+$ MODULE_AGAIN:
+$!
+$! Tell The User What Module We Are Building.
+$!
+$ IF (MODULE_NAME1.NES."")
+$ THEN
+$ IF STATE .EQS. "LIB"
+$ THEN
+$ WRITE SYS$OUTPUT "Compiling The ",MODULE_NAME1," Library Files. (",BUILDALL,",",STATE,")"
+$ ELSE IF F$TYPE('APPS_MODULE') .NES. ""
+$ THEN
+$ WRITE SYS$OUTPUT "Compiling The ",MODULE_NAME1," Applications. (",BUILDALL,",",STATE,")"
+$ ENDIF
+$ ENDIF
+$ ENDIF
+$!
+$! Define A File Counter And Set It To "0".
+$!
+$ FILE_COUNTER = 0
+$ APPLICATION = ""
+$ APPLICATION_COUNTER = 0
+$!
$! Top Of The File Loop.
$!
$ NEXT_FILE:
$!
-$! O.K, Extract The File Name From The File List.
+$! Look in the LIB_MODULE is we're in state LIB
+$!
+$ IF STATE .EQS. "LIB"
+$ THEN
+$!
+$! O.K, Extract The File Name From The File List.
+$!
+$ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",'LIB_MODULE')
$!
-$ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",'LIB_MODULE')
+$! else
+$!
+$ ELSE
+$ FILE_NAME = ","
+$!
+$ IF F$TYPE('APPS_MODULE') .NES. ""
+$ THEN
+$!
+$! Extract The File Name From The File List.
+$! This part is a bit more complicated.
+$!
+$ IF APPLICATION .EQS. ""
+$ THEN
+$ APPLICATION = F$ELEMENT(APPLICATION_COUNTER,";",'APPS_MODULE')
+$ APPLICATION_COUNTER = APPLICATION_COUNTER + 1
+$ APPLICATION_OBJECTS = F$ELEMENT(1,"/",APPLICATION)
+$ APPLICATION = F$ELEMENT(0,"/",APPLICATION)
+$ FILE_COUNTER = 0
+$ ENDIF
+$
+$! WRITE SYS$OUTPUT "DEBUG: SHOW SYMBOL APPLICATION*"
+$! SHOW SYMBOL APPLICATION*
+$!
+$ IF APPLICATION .NES. ";"
+$ THEN
+$ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",APPLICATION_OBJECTS)
+$ IF FILE_NAME .EQS. ","
+$ THEN
+$ APPLICATION = ""
+$ GOTO NEXT_FILE
+$ ENDIF
+$ ENDIF
+$ ENDIF
+$ ENDIF
$!
$! Check To See If We Are At The End Of The File List.
$!
$ IF (FILE_NAME.EQS.",")
$ THEN
$!
-$! We Are At The End Of The File List, Goto FILE_DONE.
+$! We Are At The End Of The File List, Change State Or Goto FILE_DONE.
$!
-$ GOTO FILE_DONE
+$ IF STATE .EQS. "LIB" .AND. BUILDALL .NES. "LIBRARY"
+$ THEN
+$ STATE = "APPS"
+$ GOTO MODULE_AGAIN
+$ ELSE
+$ GOTO FILE_DONE
+$ ENDIF
$!
$! End The File List Check.
$!
$ IF (F$SEARCH(SOURCE_FILE).EQS."")
$ THEN
$!
-$! Tell The User That The File Dosen't Exist.
+$! Tell The User That The File Doesn't Exist.
$!
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Dosen't Exist."
+$ WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Doesn't Exist."
$ WRITE SYS$OUTPUT ""
$!
$! Exit The Build.
$!
$ IF (MODULE_NAME.EQS."")
$ THEN
- WRITE SYS$OUTPUT "Compiling The ",FILE_NAME," File."
+$ WRITE SYS$OUTPUT "Compiling The ",FILE_NAME," File. (",BUILDALL,",",STATE,")"
$ ENDIF
$ IF (MODULE_NAME.NES."")
$ THEN
$ ENDIF
$ ENDIF
$ ENDIF
+$ IF STATE .EQS. "LIB"
+$ THEN
$!
-$! Add It To The Library.
+$! Add It To The Library.
$!
-$ LIBRARY/REPLACE 'LIB_NAME' 'OBJECT_FILE'
+$ LIBRARY/REPLACE 'LIB_NAME' 'OBJECT_FILE'
$!
-$! Time To Clean Up The Object File.
+$! Time To Clean Up The Object File.
$!
-$ DELETE 'OBJECT_FILE';*
+$ DELETE 'OBJECT_FILE';*
+$ ENDIF
$!
$! Go Back And Do It Again.
$!
$!
$ FILE_DONE:
$!
+$! Time To Build Some Applications
+$!
+$ IF F$TYPE('APPS_MODULE') .NES. "" .AND. BUILDALL .NES. "LIBRARY"
+$ THEN
+$ APPLICATION_COUNTER = 0
+$ NEXT_APPLICATION:
+$ APPLICATION = F$ELEMENT(APPLICATION_COUNTER,";",'APPS_MODULE')
+$ IF APPLICATION .EQS. ";" THEN GOTO APPLICATION_DONE
+$
+$ APPLICATION_COUNTER = APPLICATION_COUNTER + 1
+$ APPLICATION_OBJECTS = F$ELEMENT(1,"/",APPLICATION)
+$ APPLICATION = F$ELEMENT(0,"/",APPLICATION)
+$
+$! WRITE SYS$OUTPUT "DEBUG: SHOW SYMBOL APPLICATION*"
+$! SHOW SYMBOL APPLICATION*
+$!
+$! Tell the user what happens
+$!
+$ WRITE SYS$OUTPUT " ",APPLICATION,".exe"
+$!
+$! Link The Program, Check To See If We Need To Link With RSAREF Or Not.
+$!
+$ IF (RSAREF.EQS."TRUE")
+$ THEN
+$!
+$! Check To See If We Are To Link With A Specific TCP/IP Library.
+$!
+$ IF (TCPIP_LIB.NES."")
+$ THEN
+$!
+$! Link With The RSAREF Library And A Specific TCP/IP Library.
+$!
+$ LINK/'DEBUGGER'/'TRACEBACK'/EXE='EXE_DIR''APPLICATION'.EXE -
+ 'OBJ_DIR''APPLICATION_OBJECTS', -
+ 'CRYPTO_LIB'/LIBRARY,'RSAREF_LIB'/LIBRARY, -
+ 'TCPIP_LIB','OPT_FILE'/OPTION
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Link With The RSAREF Library And NO TCP/IP Library.
+$!
+$ LINK/'DEBUGGER'/'TRACEBACK'/EXE='EXE_DIR''APPLICATION'.EXE -
+ 'OBJ_DIR''APPLICATION_OBJECTS', -
+ 'CRYPTO_LIB'/LIBRARY,'RSAREF_LIB'/LIBRARY, -
+ 'OPT_FILE'/OPTION
+$!
+$! End The TCP/IP Library Check.
+$!
+$ ENDIF
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Don't Link With The RSAREF Routines.
+$!
+$!
+$! Check To See If We Are To Link With A Specific TCP/IP Library.
+$!
+$ IF (TCPIP_LIB.NES."")
+$ THEN
+$!
+$! Don't Link With The RSAREF Routines And TCP/IP Library.
+$!
+$ LINK/'DEBUGGER'/'TRACEBACK'/EXE='EXE_DIR''APPLICATION'.EXE -
+ 'OBJ_DIR''APPLICATION_OBJECTS', -
+ 'CRYPTO_LIB'/LIBRARY, -
+ 'TCPIP_LIB','OPT_FILE'/OPTION
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Don't Link With The RSAREF Routines And Link With A TCP/IP Library.
+$!
+$ LINK/'DEBUGGER'/'TRACEBACK'/EXE='EXE_DIR''APPLICATION'.EXE -
+ 'OBJ_DIR''APPLICATION_OBJECTS',-
+ 'CRYPTO_LIB'/LIBRARY, -
+ 'OPT_FILE'/OPTION
+$!
+$! End The TCP/IP Library Check.
+$!
+$ ENDIF
+$!
+$! End The RSAREF Link Check.
+$!
+$ ENDIF
+$ GOTO NEXT_APPLICATION
+$ APPLICATION_DONE:
+$ ENDIF
+$!
$! Go Back And Get The Next Module.
$!
$ GOTO MODULE_NEXT
$!
$! Check To See If P1 Is Blank.
$!
-$ IF (P1.EQS."NORSAREF")
+$ IF (P1.EQS."ALL")
$ THEN
$!
-$! P1 Is NORSAREF, So Compile With The Regular RSA Libraries.
+$! P1 Is Blank, So Build Everything.
+$!
+$ BUILDALL = "TRUE"
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Else, Check To See If P1 Has A Valid Arguement.
+$!
+$ IF (P1.EQS."LIBRARY").OR.(P1.EQS."APPS")
+$ THEN
+$!
+$! A Valid Arguement.
+$!
+$ BUILDALL = P1
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Tell The User We Don't Know What They Want.
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Option ",P1," Is Invalid. The Valid Options Are:"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT " ALL : Just Build Everything."
+$ WRITE SYS$OUTPUT " LIBRARY : To Compile Just The [.xxx.EXE.SSL]LIBCRYPTO.OLB Library."
+$ WRITE SYS$OUTPUT " APPS : To Compile Just The [.xxx.EXE.SSL]*.EXE Programs."
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT " Where 'xxx' Stands For:"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT " AXP : Alpha Architecture."
+$ WRITE SYS$OUTPUT " VAX : VAX Architecture."
+$ WRITE SYS$OUTPUT ""
+$!
+$! Time To EXIT.
+$!
+$ EXIT
+$!
+$! End The Valid Arguement Check.
+$!
+$ ENDIF
+$!
+$! End The P1 Check.
+$!
+$ ENDIF
+$!
+$! Check To See If P2 Is Blank.
+$!
+$ P2 = "NORSAREF"
+$ IF (P2.EQS."NORSAREF")
+$ THEN
+$!
+$! P2 Is NORSAREF, So Compile With The Regular RSA Libraries.
$!
$ RSAREF = "FALSE"
$ ELSE
$!
$! Check To See If We Are To Use The RSAREF Library.
$!
-$ IF (P1.EQS."RSAREF")
+$ IF (P2.EQS."RSAREF")
$ THEN
$!
$! Check To Make Sure We Have The RSAREF Source Code Directory.
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT "It appears that you don't have the RSAREF Souce Code."
$ WRITE SYS$OUTPUT "You need to go to 'ftp://ftp.rsa.com/rsaref'. You have to"
-$ WRITE SYS$OUTPUT "get the '.tar-Z' file as the '.zip' file dosen't have the"
+$ WRITE SYS$OUTPUT "get the '.tar-Z' file as the '.zip' file doesn't have the"
$ WRITE SYS$OUTPUT "directory structure stored. You have to extract the file"
$ WRITE SYS$OUTPUT "into the [.RSAREF] directory under the root directory"
$ WRITE SYS$OUTPUT "as that is where the scripts will look for the files."
$! They Entered An Invalid Option..
$!
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P1," Is Invalid. The Valid Options Are:"
+$ WRITE SYS$OUTPUT "The Option ",P2," Is Invalid. The Valid Options Are:"
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT " RSAREF : Compile With The RSAREF Library."
$ WRITE SYS$OUTPUT " NORSAREF : Compile With The Regular RSA Library."
$!
$ ENDIF
$!
-$! End The P1 Check.
+$! End The P2 Check.
$!
$ ENDIF
$!
-$! Check To See If P2 Is Blank.
+$! Check To See If P3 Is Blank.
$!
-$ IF (P2.EQS."NODEBUG")
+$ IF (P3.EQS."NODEBUG")
$ THEN
$!
-$! P2 Is NODEBUG, So Compile Without The Debugger Information.
+$! P3 Is NODEBUG, So Compile Without The Debugger Information.
$!
$ DEBUGGER = "NODEBUG"
$ TRACEBACK = "NOTRACEBACK"
$!
$! Check To See If We Are To Compile With Debugger Information.
$!
-$ IF (P2.EQS."DEBUG")
+$ IF (P3.EQS."DEBUG")
$ THEN
$!
$! Compile With Debugger Information.
$! They Entered An Invalid Option..
$!
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P2," Is Invalid. The Valid Options Are:"
+$ WRITE SYS$OUTPUT "The Option ",P3," Is Invalid. The Valid Options Are:"
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT " DEBUG : Compile With The Debugger Information."
$ WRITE SYS$OUTPUT " NODEBUG : Compile Without The Debugger Information."
$!
$ ENDIF
$!
-$! End The P2 Check.
+$! End The P3 Check.
$!
$ ENDIF
$!
$! richard@levitte.org
$!
$!
-$! Check To See If We Have A Option For P5.
+$! Check To See If We Have A Option For P6.
$!
-$ IF (P5.EQS."")
+$ IF (P6.EQS."")
$ THEN
$!
$! Get The Version Of VMS We Are Using.
$!
$ ENDIF
$!
-$! End The P5 Check.
+$! End The P6 Check.
$!
$ ENDIF
$!
-$! Check To See If P3 Is Blank.
+$! Check To See If P4 Is Blank.
$!
-$ IF (P3.EQS."")
+$ IF (P4.EQS."")
$ THEN
$!
$! O.K., The User Didn't Specify A Compiler, Let's Try To
$!
$! Looks Like GNUC, Set To Use GNUC.
$!
-$ P3 = "GNUC"
+$ P4 = "GNUC"
$!
$! Else...
$!
$!
$! Looks Like DECC, Set To Use DECC.
$!
-$ P3 = "DECC"
+$ P4 = "DECC"
$!
$! Else...
$!
$!
$! Looks Like VAXC, Set To Use VAXC.
$!
-$ P3 = "VAXC"
+$ P4 = "VAXC"
$!
$! End The VAXC Compiler Check.
$!
$!
$ ENDIF
$!
-$! Check To See If We Have A Option For P4.
+$! Check To See If We Have A Option For P5.
$!
-$ IF (P4.EQS."")
+$ IF (P5.EQS."")
$ THEN
$!
$! Find out what socket library we have available
$!
$! We have SOCKETSHR, and it is my opinion that it's the best to use.
$!
-$ P4 = "SOCKETSHR"
+$ P5 = "SOCKETSHR"
$!
$! Tell the user
$!
$!
$! Last resort: a UCX or UCX-compatible library
$!
-$ P4 = "UCX"
+$ P5 = "UCX"
$!
$! Tell the user
$!
$!
$! Set Up Initial CC Definitions, Possibly With User Ones
$!
-$ CCDEFS = "VMS=1,TCPIP_TYPE_''P4'"
+$ CCDEFS = "TCPIP_TYPE_''P5',DSO_VMS"
$ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS
$ CCEXTRAFLAGS = ""
$ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS
-$ CCDISABLEWARNINGS = ""
+$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX"
$ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN -
- CCDISABLEWARNINGS = USER_CCDISABLEWARNINGS
+ CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS
$!
$! Check To See If The User Entered A Valid Paramter.
$!
-$ IF (P3.EQS."VAXC").OR.(P3.EQS."DECC").OR.(P3.EQS."GNUC")
+$ IF (P4.EQS."VAXC").OR.(P4.EQS."DECC").OR.(P4.EQS."GNUC")
$ THEN
$!
$! Check To See If The User Wanted DECC.
$!
-$ IF (P3.EQS."DECC")
+$ IF (P4.EQS."DECC")
$ THEN
$!
$! Looks Like DECC, Set To Use DECC.
$ IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
THEN CC = "CC/DECC"
$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89" + -
- "/NOLIST/PREFIX=ALL/INCLUDE=SYS$DISK:[]" + CCEXTRAFLAGS
+ "/NOLIST/PREFIX=ALL" + -
+ "/INCLUDE=(SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.ENGINE.VENDOR_DEFNS],SYS$DISK:[.EVP])" + -
+ CCEXTRAFLAGS
$!
$! Define The Linker Options File Name.
$!
$!
$! Check To See If We Are To Use VAXC.
$!
-$ IF (P3.EQS."VAXC")
+$ IF (P4.EQS."VAXC")
$ THEN
$!
$! Looks Like VAXC, Set To Use VAXC.
$ EXIT
$ ENDIF
$ IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
-$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST/INCLUDE=SYS$DISK:[]" + -
+$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
+ "/INCLUDE=(SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.ENGINE.VENDOR_DEFNS])" + -
CCEXTRAFLAGS
$ CCDEFS = """VAXC""," + CCDEFS
$!
$!
$! Check To See If We Are To Use GNU C.
$!
-$ IF (P3.EQS."GNUC")
+$ IF (P4.EQS."GNUC")
$ THEN
$!
$! Looks Like GNUC, Set To Use GNUC.
$! Use GNU C...
$!
$ CC = "GCC/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
- "/INCLUDE=SYS$DISK:[]" + CCEXTRAFLAGS
+ "/INCLUDE=(SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.ENGINE.VENDOR_DEFNS])" + -
+ CCEXTRAFLAGS
$!
$! Define The Linker Options File Name.
$!
$ ENDIF
$ CC3 = CC + "/DEFINE=(" + CCDEFS + ISSEVEN + ")" + CCDISABLEWARNINGS
$ CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
-$ IF ARCH .EQS. "VAX" .AND. COMPILER .EQS. "DECC" .AND. P2 .NES. "DEBUG"
+$ IF ARCH .EQS. "VAX" .AND. COMPILER .EQS. "DECC" .AND. P3 .NES. "DEBUG"
$ THEN
$ CC5 = CC + "/OPTIMIZE=NODISJOINT"
$ ELSE
$! Tell The User We Don't Know What They Want.
$!
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P3," Is Invalid. The Valid Options Are:"
+$ WRITE SYS$OUTPUT "The Option ",P4," Is Invalid. The Valid Options Are:"
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT " VAXC : To Compile With VAX C."
$ WRITE SYS$OUTPUT " DECC : To Compile With DEC C."
$!
$! Time to check the contents, and to make sure we get the correct library.
$!
-$ IF P4.EQS."SOCKETSHR" .OR. P4.EQS."MULTINET" .OR. P4.EQS."UCX"
+$ IF P5.EQS."SOCKETSHR" .OR. P5.EQS."MULTINET" .OR. P5.EQS."UCX"
$ THEN
$!
$! Check to see if SOCKETSHR was chosen
$!
-$ IF P4.EQS."SOCKETSHR"
+$ IF P5.EQS."SOCKETSHR"
$ THEN
$!
$! Set the library to use SOCKETSHR
$!
$! Check to see if MULTINET was chosen
$!
-$ IF P4.EQS."MULTINET"
+$ IF P5.EQS."MULTINET"
$ THEN
$!
$! Set the library to use UCX emulation.
$!
-$ P4 = "UCX"
+$ P5 = "UCX"
$!
$! Done with MULTINET
$!
$!
$! Check to see if UCX was chosen
$!
-$ IF P4.EQS."UCX"
+$ IF P5.EQS."UCX"
$ THEN
$!
$! Set the library to use UCX.
$! Tell The User We Don't Know What They Want.
$!
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P4," Is Invalid. The Valid Options Are:"
+$ WRITE SYS$OUTPUT "The Option ",P5," Is Invalid. The Valid Options Are:"
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library."
$ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library."
$! Check if the user wanted to compile just a subset of all the encryption
$! methods.
$!
-$ IF P6 .NES. ""
+$ IF P7 .NES. ""
$ THEN
-$ ENCRYPT_TYPES = P6
+$ ENCRYPT_TYPES = P7
+$! NYI: ENCRYPT_PROGRAMS = P7
$ ENDIF
$!
$! Time To RETURN...
$! Save directory information
$!
$ __HERE = F$PARSE(F$PARSE("A.;",F$ENVIRONMENT("PROCEDURE"))-"A.;","[]A.;") - "A.;"
+$ __HERE = F$EDIT(__HERE,"UPCASE")
$ __TOP = __HERE - "CRYPTO]"
$ __INCLUDE = __TOP + "INCLUDE.OPENSSL]"
$!
projects / openssl.git / blobdiff