-/* ====================================================================
- * Copyright (c) 2015 The OpenSSL Project. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- * software must display the following acknowledgment:
- * "This product includes software developed by the OpenSSL Project
- * for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- * endorse or promote products derived from this software without
- * prior written permission. For written permission, please contact
- * openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- * nor may "OpenSSL" appear in their names without prior written
- * permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- * acknowledgment:
- * "This product includes software developed by the OpenSSL Project
- * for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com). This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
+/*
+ * Copyright 2016-2018 The OpenSSL Project Authors. All Rights Reserved.
*
+ * Licensed under the OpenSSL license (the "License"). You may not use
+ * this file except in compliance with the License. You can obtain a copy
+ * in the file LICENSE in the source distribution or at
+ * https://www.openssl.org/source/license.html
*/
#include <stdio.h>
*
* options holds BIO socket options that can be used
* You should call this for every address returned by BIO_lookup
- * until the connection is succesful.
+ * until the connection is successful.
*
* Returns 1 on success or 0 on failure. On failure errno is set
* and an error status is added to the OpenSSL error stack.
*/
int BIO_connect(int sock, const BIO_ADDR *addr, int options)
{
- int on = 1;
+ const int on = 1;
if (sock == -1) {
BIOerr(BIO_F_BIO_CONNECT, BIO_R_INVALID_SOCKET);
return 0;
if (options & BIO_SOCK_KEEPALIVE) {
- if (setsockopt(sock, SOL_SOCKET, SO_KEEPALIVE, &on, sizeof(on)) != 0) {
+ if (setsockopt(sock, SOL_SOCKET, SO_KEEPALIVE,
+ (const void *)&on, sizeof(on)) != 0) {
SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
BIOerr(BIO_F_BIO_CONNECT, BIO_R_UNABLE_TO_KEEPALIVE);
return 0;
}
if (options & BIO_SOCK_NODELAY) {
- if (setsockopt(sock, IPPROTO_TCP, TCP_NODELAY, &on, sizeof(on)) != 0) {
+ if (setsockopt(sock, IPPROTO_TCP, TCP_NODELAY,
+ (const void *)&on, sizeof(on)) != 0) {
SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
BIOerr(BIO_F_BIO_CONNECT, BIO_R_UNABLE_TO_NODELAY);
return 0;
return 1;
}
+/*-
+ * BIO_bind - bind socket to address
+ * @sock: the socket to set
+ * @addr: local address to bind to
+ * @options: BIO socket options
+ *
+ * Binds to the address using the given socket and options.
+ *
+ * Options can be a combination of the following:
+ * - BIO_SOCK_REUSEADDR: Try to reuse the address and port combination
+ * for a recently closed port.
+ *
+ * When restarting the program it could be that the port is still in use. If
+ * you set to BIO_SOCK_REUSEADDR option it will try to reuse the port anyway.
+ * It's recommended that you use this.
+ */
+int BIO_bind(int sock, const BIO_ADDR *addr, int options)
+{
+# ifndef OPENSSL_SYS_WINDOWS
+ int on = 1;
+# endif
+
+ if (sock == -1) {
+ BIOerr(BIO_F_BIO_BIND, BIO_R_INVALID_SOCKET);
+ return 0;
+ }
+
+# ifndef OPENSSL_SYS_WINDOWS
+ /*
+ * SO_REUSEADDR has different behavior on Windows than on
+ * other operating systems, don't set it there.
+ */
+ if (options & BIO_SOCK_REUSEADDR) {
+ if (setsockopt(sock, SOL_SOCKET, SO_REUSEADDR,
+ (const void *)&on, sizeof(on)) != 0) {
+ SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
+ BIOerr(BIO_F_BIO_BIND, BIO_R_UNABLE_TO_REUSEADDR);
+ return 0;
+ }
+ }
+# endif
+
+ if (bind(sock, BIO_ADDR_sockaddr(addr), BIO_ADDR_sockaddr_size(addr)) != 0) {
+ SYSerr(SYS_F_BIND, get_last_socket_error());
+ BIOerr(BIO_F_BIO_BIND, BIO_R_UNABLE_TO_BIND_SOCKET);
+ return 0;
+ }
+
+ return 1;
+}
+
/*-
* BIO_listen - Creates a listen socket
* @sock: the socket to listen with
* fail. We can't tell the difference between already listening ourself to
* it and someone else listening to it when failing and errno is EADDRINUSE, so
* it's recommended to not give an error in that case if the first call was
- * succesful.
+ * successful.
*
* When restarting the program it could be that the port is still in use. If
* you set to BIO_SOCK_REUSEADDR option it will try to reuse the port anyway.
return 0;
}
- if (getsockopt(sock, SOL_SOCKET, SO_TYPE, &socktype, &socktype_len) != 0
+ if (getsockopt(sock, SOL_SOCKET, SO_TYPE,
+ (void *)&socktype, &socktype_len) != 0
|| socktype_len != sizeof(socktype)) {
SYSerr(SYS_F_GETSOCKOPT, get_last_socket_error());
BIOerr(BIO_F_BIO_LISTEN, BIO_R_GETTING_SOCKTYPE);
if (!BIO_socket_nbio(sock, (options & BIO_SOCK_NONBLOCK) != 0))
return 0;
-# ifndef OPENSSL_SYS_WINDOWS
- /* SO_REUSEADDR has different behavior on Windows than on
- * other operating systems, don't set it there. */
- if (options & BIO_SOCK_REUSEADDR) {
- if (setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, &on, sizeof(on)) != 0) {
- SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
- BIOerr(BIO_F_BIO_LISTEN, BIO_R_UNABLE_TO_REUSEADDR);
- return 0;
- }
- }
-# endif
-
if (options & BIO_SOCK_KEEPALIVE) {
- if (setsockopt(sock, SOL_SOCKET, SO_KEEPALIVE, &on, sizeof(on)) != 0) {
+ if (setsockopt(sock, SOL_SOCKET, SO_KEEPALIVE,
+ (const void *)&on, sizeof(on)) != 0) {
SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
BIOerr(BIO_F_BIO_LISTEN, BIO_R_UNABLE_TO_KEEPALIVE);
return 0;
}
if (options & BIO_SOCK_NODELAY) {
- if (setsockopt(sock, IPPROTO_TCP, TCP_NODELAY, &on, sizeof(on)) != 0) {
+ if (setsockopt(sock, IPPROTO_TCP, TCP_NODELAY,
+ (const void *)&on, sizeof(on)) != 0) {
SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
BIOerr(BIO_F_BIO_LISTEN, BIO_R_UNABLE_TO_NODELAY);
return 0;
}
# ifdef IPV6_V6ONLY
- if ((options & BIO_SOCK_V6_ONLY) && BIO_ADDR_family(addr) == AF_INET6) {
- if (setsockopt(sock, IPPROTO_IPV6, IPV6_V6ONLY, &on, sizeof(on)) != 0) {
+ if (BIO_ADDR_family(addr) == AF_INET6) {
+ /*
+ * Note: Windows default of IPV6_V6ONLY is ON, and Linux is OFF.
+ * Therefore we always have to use setsockopt here.
+ */
+ on = options & BIO_SOCK_V6_ONLY ? 1 : 0;
+ if (setsockopt(sock, IPPROTO_IPV6, IPV6_V6ONLY,
+ (const void *)&on, sizeof(on)) != 0) {
SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
BIOerr(BIO_F_BIO_LISTEN, BIO_R_LISTEN_V6_ONLY);
return 0;
}
# endif
- if (bind(sock, BIO_ADDR_sockaddr(addr), BIO_ADDR_sockaddr_size(addr)) != 0) {
- SYSerr(SYS_F_BIND, get_last_socket_error());
- BIOerr(BIO_F_BIO_LISTEN, BIO_R_UNABLE_TO_BIND_SOCKET);
+ if (!BIO_bind(sock, addr, options))
return 0;
- }
if (socktype != SOCK_DGRAM && listen(sock, MAX_LISTEN) == -1) {
SYSerr(SYS_F_LISTEN, get_last_socket_error());
projects / openssl.git / blobdiff