The previous take went wrong, try again.

[openssl.git] / config

diff --git a/config b/config
index 6f47d42e06850918f42bb9a3dd787dd51efde99a..98729827c8e6711159d642227637fd8c6a339383 100755 (executable)
--- a/config
+++ b/config
@@ -48,10 +48,10 @@ done
 
 # First get uname entries that we use below
 
-MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
-RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
-SYSTEM=`(uname -s) 2>/dev/null`  || SYSTEM="unknown"
-VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
+[ "$MACHINE" ] || MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
+[ "$RELEASE" ] || RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
+[ "$SYSTEM" ] || SYSTEM=`(uname -s) 2>/dev/null`  || SYSTEM="unknown"
+[ "$BUILD" ] || VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
 
 
 # Now test for ISC and SCO, since it is has a braindamaged uname.
@@ -278,7 +278,7 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
                echo "ppc-apple-darwin${VERSION}"
                ;;
            *)
-               echo "i386-apple-darwin${VERSION}"
+               echo "i686-apple-darwin${VERSION}"
                ;;
        esac
        exit 0
@@ -407,11 +407,8 @@ exit 0
 # this is where the translation occurs into SSLeay terms
 # ---------------------------------------------------------------------------
 
-# figure out if gcc is available and if so we use it otherwise
-# we fallback to whatever cc does on the system
 GCCVER=`(gcc -dumpversion) 2>/dev/null`
 if [ "$GCCVER" != "" ]; then
-  CC=gcc
   # then strip off whatever prefix egcs prepends the number with...
   # Hopefully, this will work for any future prefixes as well.
   GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'`
@@ -420,8 +417,17 @@ if [ "$GCCVER" != "" ]; then
   # major and minor version numbers.
   # peak single digit before and after first dot, e.g. 2.95.1 gives 29
   GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
-else
-  CC=cc
+fi
+
+# Only set CC if not supplied already
+if [ -z "$CC" ]; then
+# figure out if gcc is available and if so we use it otherwise
+# we fallback to whatever cc does on the system
+  if [ "$GCCVER" != "" ]; then
+    CC=gcc
+  else
+    CC=cc
+  fi
 fi
 GCCVER=${GCCVER:-0}
 if [ "$SYSTEM" = "HP-UX" ];then
@@ -490,6 +496,12 @@ echo Operating system: $GUESSOS
 # script above so we end up with values in vars but that would take
 # more time that I want to waste at the moment
 case "$GUESSOS" in
+  uClinux*64*)
+    OUT=uClinux-dist64
+       ;;
+  uClinux*)
+    OUT=uClinux-dist
+       ;;
   mips2-sgi-irix)
        CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
        CPU=${CPU:-0}
@@ -525,8 +537,28 @@ case "$GUESSOS" in
        OUT="irix-mips3-$CC"
        ;;
   ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
-  ppc-apple-darwin*) OUT="darwin-ppc-cc" ;;
-  i386-apple-darwin*) OUT="darwin-i386-cc" ;;
+  ppc-apple-darwin*)
+       ISA64=`(sysctl -n hw.optional.64bitops) 2>/dev/null`
+       if [ "$ISA64" = "1" ]; then
+           echo "WARNING! If you wish to build 64-bit library, then you have to"
+           echo "         invoke './Configure darwin64-ppc-cc' *manually*."
+           if [ "$TEST" = "false" -a -t 1 ]; then
+             echo "         You have about 5 seconds to press Ctrl-C to abort."
+             (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+           fi
+       fi
+       OUT="darwin-ppc-cc" ;;
+  i?86-apple-darwin*)
+       ISA64=`(sysctl -n hw.optional.x86_64) 2>/dev/null`
+       if [ "$ISA64" = "1" ]; then
+           echo "WARNING! If you wish to build 64-bit library, then you have to"
+           echo "         invoke './Configure darwin64-x86_64-cc' *manually*."
+           if [ "$TEST" = "false" -a -t 1 ]; then
+             echo "         You have about 5 seconds to press Ctrl-C to abort."
+             (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+           fi
+       fi
+       OUT="darwin-i386-cc" ;;
   alpha-*-linux2)
         ISA=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo`
        case ${ISA:-generic} in
@@ -535,9 +567,9 @@ case "$GUESSOS" in
        esac
        if [ "$CC" = "gcc" ]; then
            case ${ISA:-generic} in
-           EV5|EV45)           options="$options -march=ev5";;
-           EV56|PCA56)         options="$options -march=ev56";;
-           *)                  options="$options -march=ev6";;
+           EV5|EV45)           options="$options -mcpu=ev5";;
+           EV56|PCA56)         options="$options -mcpu=ev56";;
+           *)                  options="$options -mcpu=ev6";;
            esac
        fi
        ;;
@@ -591,8 +623,8 @@ case "$GUESSOS" in
 
        options="$options -DB_ENDIAN -mschedule=$CPUSCHEDULE -march=$CPUARCH"
        OUT="linux-generic32" ;;
-  arm*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
-  arm*l-*-linux2) OUT="linux-generic32"; options="$options -DL_ENDIAN" ;;
+  armv[1-3]*-*-linux2) OUT="linux-generic32" ;;
+  arm*-*-linux2) OUT="linux-armv4" ;;
   sh*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
   sh*-*-linux2)  OUT="linux-generic32"; options="$options -DL_ENDIAN" ;;
   m68k*-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
@@ -664,8 +696,8 @@ case "$GUESSOS" in
   *-*-sunos4)          OUT="sunos-$CC" ;;
 
   *86*-*-bsdi4)                OUT="BSD-x86-elf"; options="$options no-sse2 -ldl" ;;
-  alpha*-*-*bsd*)      OUT="BSD-generic64; options="$options -DL_ENDIAN" ;;
-  powerpc64-*-*bsd*)   OUT="BSD-generic64; options="$options -DB_ENDIAN" ;;
+  alpha*-*-*bsd*)      OUT="BSD-generic64"; options="$options -DL_ENDIAN" ;;
+  powerpc64-*-*bsd*)   OUT="BSD-generic64"; options="$options -DB_ENDIAN" ;;
   sparc64-*-*bsd*)     OUT="BSD-sparc64" ;;
   ia64-*-*bsd*)                OUT="BSD-ia64" ;;
   amd64-*-*bsd*)       OUT="BSD-x86_64" ;;
@@ -772,6 +804,8 @@ case "$GUESSOS" in
   j90-cray-unicos) OUT="cray-j90" ;;
   nsr-tandem-nsk) OUT="tandem-c89" ;;
   beos-*) OUT="$GUESSOS" ;;
+  x86pc-*-qnx6) OUT="QNX6-i386" ;;
+  *-*-qnx6) OUT="QNX6" ;;
   *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
 esac