CYGWIN*)
case "$RELEASE" in
[bB]*|1.0|1.[12].*)
- echo "${MACHINE}-whatever-cygwin32_pre1.3"
+ echo "${MACHINE}-whatever-cygwin_pre1.3"
;;
*)
- echo "${MACHINE}-whatever-cygwin32"
+ echo "${MACHINE}-whatever-cygwin"
;;
esac
exit 0
;;
+ *"CRAY T3E")
+ echo "t3e-cray-unicosmk"; exit 0;
+ ;;
+
+ *CRAY*)
+ echo "j90-cray-unicos"; exit 0;
+ ;;
+
+ NONSTOP_KERNEL*)
+ echo "nsr-tandem-nsk"; exit 0;
+ ;;
esac
#
# figure out if gcc is available and if so we use it otherwise
# we fallback to whatever cc does on the system
-GCCVER=`(gcc --version) 2>/dev/null`
+GCCVER=`(gcc -dumpversion) 2>/dev/null`
if [ "$GCCVER" != "" ]; then
CC=gcc
- # then strip off whatever prefix Cygnus prepends the number with...
- GCCVER=`echo $GCCVER | sed 's/^[a-z]*\-//'`
+ # then strip off whatever prefix egcs prepends the number with...
+ # Hopefully, this will work for any future prefixes as well.
+ GCCVER=`echo $GCCVER | sed 's/^[a-zA-Z]*\-//'`
+ # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion
+ # does give us what we want though, so we use that. We just just the
+ # major and minor version numbers.
# peak single digit before and after first dot, e.g. 2.95.1 gives 29
GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
else
CC=cc
fi
GCCVER=${GCCVER:-0}
-
+if [ "$SYSTEM" = "HP-UX" ];then
+ # By default gcc is a ILP32 compiler (with long long == 64).
+ GCC_BITS="32"
+ if [ $GCCVER -ge 30 ]; then
+ # PA64 support only came in with gcc 3.0.x.
+ # We look for the preprocessor symbol __LP64__ indicating
+ # 64bit bit long and pointer. sizeof(int) == 32 on HPUX64.
+ if gcc -v -E -x c /dev/null 2>&1 | grep __LP64__ > /dev/null; then
+ GCC_BITS="64"
+ fi
+ fi
+fi
if [ "$SYSTEM" = "SunOS" ]; then
if [ $GCCVER -ge 30 ]; then
# 64-bit ABI isn't officially supported in gcc 3.0, but it appears
${CC} -o dummy dummy.c && OUT=`./dummy ${MACHINE}`
rm dummy dummy.c
;;
+ ppc64-*-linux2)
+ #Use the standard target for PPC architecture until we create a
+ #special one for the 64bit architecture.
+ OUT="linux-ppc" ;;
ppc-*-linux2) OUT="linux-ppc" ;;
m68k-*-linux*) OUT="linux-m68k" ;;
ia64-*-linux?) OUT="linux-ia64" ;;
ppc-apple-darwin*) OUT="darwin-ppc-cc" ;;
i386-apple-darwin*) OUT="darwin-i386-cc" ;;
sparc64-*-linux2)
- #Before we can uncomment following lines we have to wait at least
- #till 64-bit glibc for SPARC is operational:-(
- #echo "WARNING! If you wish to build 64-bit library, then you have to"
- #echo " invoke './Configure linux64-sparcv9' *manually*."
- #echo " Type return if you want to continue, Ctrl-C to abort."
- #read waste < /dev/tty
+ echo "WARNING! If *know* that your GNU C supports 64-bit/V9 ABI"
+ echo " and wish to build 64-bit library, then you have to"
+ echo " invoke './Configure linux64-sparcv9' *manually*."
+ if [ "$TEST" = "false" ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (stty -icanon min 0 time 50; read waste) < /dev/tty
+ fi
OUT="linux-sparcv9" ;;
sparc-*-linux2)
KARCH=`awk '/^type/{print$3}' /proc/cpuinfo`
arm*-*-linux2) OUT="linux-elf-arm" ;;
s390-*-linux2) OUT="linux-s390" ;;
s390x-*-linux?) OUT="linux-s390x" ;;
+ x86_64-*-linux?) OUT="linux-x86_64" ;;
*-*-linux2) OUT="linux-elf"
if [ "$GCCVER" -gt 28 ]; then
if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then
*86*-*-netbsd) OUT="NetBSD-x86" ;;
sun3*-*-netbsd) OUT="NetBSD-m68" ;;
*-*-netbsd) OUT="NetBSD-sparc" ;;
- *86*-*-openbsd) OUT="OpenBSD-x86" ;;
alpha*-*-openbsd) OUT="OpenBSD-alpha" ;;
+ *86*-*-openbsd) OUT="OpenBSD-i386" ;;
+ m68k*-*-openbsd) OUT="OpenBSD-m68k" ;;
+ m88k*-*-openbsd) OUT="OpenBSD-m88k" ;;
+ mips*-*-openbsd) OUT="OpenBSD-mips" ;;
pmax*-*-openbsd) OUT="OpenBSD-mips" ;;
+ powerpc*-*-openbsd) OUT="OpenBSD-powerpc" ;;
+ sparc64*-*-openbsd) OUT="OpenBSD-sparc64" ;;
+ sparc*-*-openbsd) OUT="OpenBSD-sparc" ;;
+ vax*-*-openbsd) OUT="OpenBSD-vax" ;;
+ hppa*-*-openbsd) OUT="OpenBSD-hppa" ;;
*-*-openbsd) OUT="OpenBSD" ;;
*86*-*-bsdi4) OUT="bsdi-elf-gcc" ;;
*-*-osf) OUT="alphaold-cc" ;;
RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
*-siemens-sysv4) OUT="SINIX" ;;
*-hpux1*)
- OUT="hpux-parisc-$CC"
+ if [ $CC = "gcc" ];
+ then
+ if [ $GCC_BITS = "64" ]; then
+ OUT="hpux64-parisc-gcc"
+ else
+ OUT="hpux-parisc-gcc"
+ fi
+ else
+ OUT="hpux-parisc-$CC"
+ fi
KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
KERNEL_BITS=${KERNEL_BITS:-32}
CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
# *-aix) OUT="aix-$CC" ;;
# *-dgux) OUT="dgux" ;;
mips-sony-newsos4) OUT="newsos4-gcc" ;;
- *-*-cygwin32_pre1.3) OUT="CygWin32-pre1.3" ;;
- *-*-cygwin32) OUT="CygWin32" ;;
+ *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;;
+ *-*-cygwin) OUT="Cygwin" ;;
+ t3e-cray-unicosmk) OUT="cray-t3e" ;;
+ j90-cray-unicos) OUT="cray-j90" ;;
+ nsr-tandem-nsk) OUT="tandem-c89" ;;
*) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
esac
i386-*) options="$options 386" ;;
esac
-for i in bf cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 rijndael ripemd rsa sha
+for i in bf cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 aes ripemd rsa sha
do
if [ ! -d crypto/$i ]
then
projects / openssl.git / blobdiff