#!/bin/sh
#
-# config - this is a merge of minarch and GuessOS from the Apache Group
-# which then automatically runs Configure from SSLeay after
-# mapping the Apache names for OSs into SSLeay names
+# OpenSSL config: determine the operating system and run ./Configure
#
-# 29-May-97 eay Added no-asm option
-# 27-May-97 eay Alpha linux mods
-# ??-May-97 eay IRIX mods
-# 16-Sep-97 tjh first cut of merged version
-#
-# Tim Hudson
-# tjh@cryptsoft.com
+# "config -h" for usage information.
#
+# this is a merge of minarch and GuessOS from the Apache Group.
+# Originally written by Tim Hudson <tjh@cryptsoft.com>.
# Original Apache Group comments on GuessOS
HP-UX:*)
HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
case "$HPUXVER" in
+ 11.*)
+ echo "${MACHINE}-hp-hpux11"; exit 0
+ ;;
10.*)
- echo "${MACHINE}-hp-hpux10."; exit 0
+ echo "${MACHINE}-hp-hpux10"; exit 0
;;
*)
echo "${MACHINE}-hp-hpux"; exit 0
echo "${MACHINE}-lynx-lynxos"; exit 0
;;
+ BSD/OS:4.*) # BSD/OS always says 386
+ echo "i486-whatever-bsdi4"; exit 0
+ ;;
+
BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*)
- echo "i486-whatever-bsdi"; exit 0
+ case `/sbin/sysctl -n hw.model` in
+ Pentium*)
+ echo "i586-whatever-bsdi"; exit 0
+ ;;
+ *)
+ echo "i386-whatever-bsdi"; exit 0
+ ;;
+ esac;
;;
BSD/386:*|BSD/OS:*)
echo "${MACHINE}-whatever-freebsd3"; exit 0
;;
- FreeBSD:*:*:*486*)
- echo "i486-whatever-freebsd"; exit 0
+ FreeBSD:*:*:*386*)
+ case `sysctl -n hw.model` in
+ Pentium*)
+ echo "i586-whatever-freebsd"; exit 0
+ ;;
+ *)
+ echo "i386-whatever-freebsd"; exit 0
+ ;;
+ esac;
;;
FreeBSD:*)
echo "${MACHINE}-whatever-freebsd"; exit 0
;;
- NetBSD:*:*:*486*)
- echo "i486-whatever-netbsd"; exit 0
+ NetBSD:*:*:*386*)
+ echo "`sysctl -n hw.model | sed 's,.*\(.\)86-class.*,i\186,'`-whateve\r-netbsd"; exit 0
;;
NetBSD:*)
echo "${MACHINE}-unknown-ultrix"; exit 0
;;
- SINIX*)
- echo "${MACHINE}-sni-sysv4"; exit 0
+ SINIX*|ReliantUNIX*)
+ echo "${MACHINE}-siemens-sysv4"; exit 0
+ ;;
+
+ POSIX-BC*)
+ echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000"
;;
machten:*)
# Now NeXT
ISNEXT=`hostinfo 2>/dev/null`
case "$ISNEXT" in
+ *'NeXT Mach 3.3'*)
+ echo "whatever-next-nextstep3.3"; exit 0
+ ;;
*NeXT*)
echo "whatever-next-nextstep"; exit 0
;;
# At this point we gone through all the one's
# we know of: Punt
-echo "${MACHINE}-whatever-${SYSTEM}|${RELEASE}|${VERSION}"
+echo "${MACHINE}-whatever-${SYSTEM}"
exit 0
) 2>/dev/null | (
PREFIX=""
SUFFIX=""
-VERBOSE="false"
TEST="false"
# pick up any command line args to config
do
case "$i" in
-d*) PREFIX="debug-";;
--v*) VERBOSE="true";;
-t*) TEST="true";;
--h*) cat <<EOF
-usage: config [options]
+-h*) TEST="true"; cat <<EOF
+Usage: config [options]
-d Add a debug- prefix to machine choice.
- -v Verbose mode.
-t Test mode, do not run the Configure perl script.
-h This help.
Any other text will be passed to the Configure perl script.
-Usefull options include
- no-asm Build with no assember code.
- -Dxxx Add xxx define to compilation.
- -Lxxx Add xxx library include path to build.
- -lxxx Add xxx library to build.
-
-eg, to build using RSAref, without assember, building to allow anon-DH
-ciphers and null encryption ciphers,
- config no-asm -DRSAref -DSSL_ALLOW_ADH -DSSL_ALLOW_ENULL -lrsaref
+See INSTALL for instructions.
+
EOF
;;
*) options=$options" $i" ;;
CC=gcc
else
CC=cc
+ if [ "$SYSTEM" = "SunOS" ]
+ then
+ case `cc -V 2>&1` in
+ *4*) CC=cc;;
+ *5*) CC=cc;;
+ *) CC=sc3;;
+ esac
+ fi
fi
# read the output of the embedded GuessOS
read GUESSOS
-if [ "$VERBOSE" = "true" ]; then
- echo GUESSOS $GUESSOS
-fi
+echo Operating system: $GUESSOS
# now map the output into SSLeay terms ... really should hack into the
# script above so we end up with values in vars but that would take
case "$GUESSOS" in
alpha-*-linux2) OUT="alpha-gcc" ;;
ppc-*-linux2) OUT="linux-ppc" ;;
+ mips-*-linux?) OUT="linux-mips" ;;
+ sparc-*-linux2) OUT="linux-sparc" ;;
+ sparc64-*-linux2) OUT="linux-sparc64" ;;
*-*-linux2) OUT="linux-elf" ;;
*-*-linux1) OUT="linux-aout" ;;
+ sun4u-sun-solaris2) OUT="solaris-usparc-$CC" ;;
sun4*-sun-solaris2) OUT="solaris-sparc-$CC" ;;
*86*-sun-solaris2) OUT="solaris-x86-$CC" ;;
*-*-sunos4) OUT="sunos-$CC" ;;
+ alpha*-*-freebsd3) OUT="FreeBSD-alpha" ;;
*-freebsd3) OUT="FreeBSD-elf" ;;
*-freebsd) OUT="FreeBSD" ;;
*86*-*-netbsd) OUT="NetBSD-x86" ;;
alpha*-*-openbsd) OUT="OpenBSD-alpha" ;;
pmax*-*-openbsd) OUT="OpenBSD-mips" ;;
*-*-openbsd) OUT="OpenBSD" ;;
+ *86*-*-bsdi4) OUT="bsdi-elf-gcc" ;;
*-*-osf) OUT="alpha-cc" ;;
*-*-unixware*) OUT="unixware-2.0" ;;
- *-sni-sysv4) OUT="SINIX" ;;
- *-hpux*) OUT="hpux-$CC" ;;
+ BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
+ RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
+ *-siemens-sysv4) OUT="SINIX" ;;
# these are all covered by the catchall below
+ # *-hpux*) OUT="hpux-$CC" ;;
# *-aix) OUT="aix-$CC" ;;
# *-dgux) OUT="dgux" ;;
*) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
esac
+# gcc < 2.8 does not support -mcpu=ultrasparc
+if [ "$OUT" = solaris-usparc-gcc ]
+then
+ GCCVERMAJOR="`echo $GCCVER | sed 's/.*version \([^.]*\).*/\1/`"
+ GCCVERMINOR="`echo $GCCVER | sed 's/.*version[^.]*\.\([^.]*\).*/\1/`"
+ echo "gcc version $GCCVERMAJOR.$GCCVERMINOR.x"
+ if [ $GCCVERMAJOR$GCCVERMINOR -lt 28 ]
+ then
+ OUT=solaris-usparc-oldgcc
+ fi
+fi
+
+case "$GUESSOS" in
+ i386-*) options="$options 386" ;;
+esac
+
+for i in bf cast des dh dsa hmac md2 md5 mdc2 rc2 rc4 rc5 rsa sha
+do
+ if [ ! -d crypto/$i ]
+ then
+ options="$options no-$i"
+ fi
+done
+
if [ -z "$OUT" ]; then
OUT="$CC"
fi
OUT="$PREFIX$OUT"
-# at this point we have the answer ... which we could check again
-# and then fallback to a vanilla SSLeay build but then this script
-# wouldn't get updated
-echo Configuring for $OUT
+$PERL ./Configure 2>&1 | grep "$OUT" > /dev/null
+if [ $? = "0" ]; then
+ echo Configuring for $OUT
-if [ "$TEST" = "true" ]; then
- echo $PERL ./Configure $OUT $options
+ if [ "$TEST" = "true" ]; then
+ echo $PERL ./Configure $OUT $options
+ else
+ $PERL ./Configure $OUT $options
+ fi
else
- $PERL ./Configure $OUT $options
+ echo "This system ($OUT) is not supported. See file INSTALL for details."
fi
-
)
-
projects / openssl.git / blobdiff