Alpha assembler pack update from HEAD.

[openssl.git] / config

diff --git a/config b/config
index a84d6b4b4e1cfdfdf432765104fba16e0d047bfe..2d9ab4d2a4b102fe591824b46f82c4e0b0d01472 100755 (executable)
--- a/config
+++ b/config
@@ -48,10 +48,10 @@ done
 
 # First get uname entries that we use below
 
-MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
-RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
-SYSTEM=`(uname -s) 2>/dev/null`  || SYSTEM="unknown"
-VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
+[ "$MACHINE" ] || MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
+[ "$RELEASE" ] || RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
+[ "$SYSTEM" ] || SYSTEM=`(uname -s) 2>/dev/null`  || SYSTEM="unknown"
+[ "$BUILD" ] || VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
 
 
 # Now test for ISC and SCO, since it is has a braindamaged uname.
@@ -407,11 +407,8 @@ exit 0
 # this is where the translation occurs into SSLeay terms
 # ---------------------------------------------------------------------------
 
-# figure out if gcc is available and if so we use it otherwise
-# we fallback to whatever cc does on the system
 GCCVER=`(gcc -dumpversion) 2>/dev/null`
 if [ "$GCCVER" != "" ]; then
-  CC=gcc
   # then strip off whatever prefix egcs prepends the number with...
   # Hopefully, this will work for any future prefixes as well.
   GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'`
@@ -420,8 +417,17 @@ if [ "$GCCVER" != "" ]; then
   # major and minor version numbers.
   # peak single digit before and after first dot, e.g. 2.95.1 gives 29
   GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
-else
-  CC=cc
+fi
+
+# Only set CC if not supplied already
+if [ -z "$CC" ]; then
+# figure out if gcc is available and if so we use it otherwise
+# we fallback to whatever cc does on the system
+  if [ "$GCCVER" != "" ]; then
+    CC=gcc
+  else
+    CC=cc
+  fi
 fi
 GCCVER=${GCCVER:-0}
 if [ "$SYSTEM" = "HP-UX" ];then
@@ -490,6 +496,12 @@ echo Operating system: $GUESSOS
 # script above so we end up with values in vars but that would take
 # more time that I want to waste at the moment
 case "$GUESSOS" in
+  uClinux*64*)
+    OUT=uClinux-dist64
+       ;;
+  uClinux*)
+    OUT=uClinux-dist
+       ;;
   mips2-sgi-irix)
        CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
        CPU=${CPU:-0}
@@ -724,20 +736,17 @@ case "$GUESSOS" in
        if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then
            OUT="hpux64-parisc2-gcc"
        fi
-       KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
+       [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
        KERNEL_BITS=${KERNEL_BITS:-32}
        CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
        CPU_VERSION=${CPU_VERSION:-0}
        # See <sys/unistd.h> for further info on CPU_VERSION.
        if   [ $CPU_VERSION -ge 768 ]; then     # IA-64 CPU
-            echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi."
-            echo "         If you wish to build 32-bit library, the you have to"
-            echo "         invoke './Configure hpux-ia64-cc' *manually*."
-            if [ "$TEST" = "false" -a -t 1 ]; then
-               echo "         You have about 5 seconds to press Ctrl-C to abort."
-               (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
-            fi
-            OUT="hpux64-ia64-cc"
+            if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
+               OUT="hpux64-ia64-cc"
+             else
+               OUT="hpux-ia64-cc"
+             fi
        elif [ $CPU_VERSION -ge 532 ]; then     # PA-RISC 2.x CPU
             OUT=${OUT:-"hpux-parisc2-${CC}"}
             if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
@@ -758,11 +767,15 @@ case "$GUESSOS" in
        options="$options -D_REENTRANT" ;;
   *-hpux)      OUT="hpux-parisc-$CC" ;;
   *-aix)
-       KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
+       [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
        KERNEL_BITS=${KERNEL_BITS:-32}
        OBJECT_MODE=${OBJECT_MODE:-32}
        if [ "$CC" = "gcc" ]; then
            OUT="aix-gcc"
+          if [ $OBJECT_MODE -eq 64 ]; then
+            echo 'Your $OBJECT_MODE was found to be set to 64'
+            OUT="aix64-gcc"
+          fi
        elif [ $OBJECT_MODE -eq 64 ]; then
            echo 'Your $OBJECT_MODE was found to be set to 64' 
            OUT="aix64-cc"
@@ -792,6 +805,8 @@ case "$GUESSOS" in
   j90-cray-unicos) OUT="cray-j90" ;;
   nsr-tandem-nsk) OUT="tandem-c89" ;;
   beos-*) OUT="$GUESSOS" ;;
+  x86pc-*-qnx6) OUT="QNX6-i386" ;;
+  *-*-qnx6) OUT="QNX6" ;;
   *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
 esac
 
@@ -807,6 +822,11 @@ esac
 #  options="$options -DATALLA"
 #fi
 
+! expr "$options" : '.*no\-asm' > /dev/null && \
+($CC -Wa,--help -c -o /dev/null -x assembler /dev/null 2>&1 | \
+ grep \\--noexecstack) 2>&1 > /dev/null && \
+  options="$options -Wa,--noexecstack"
+
 # gcc < 2.8 does not support -march=ultrasparc
 if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
 then