Remove eng_aesni.c as AES-NI support is integrated directly at EVP.

[openssl.git] / config

diff --git a/config b/config
index 6583959479a12e282a0b5426336b69f9b13dfd9d..06bebb8aafceb47fcb46d303c2767b7818becee2 100755 (executable)
--- a/config
+++ b/config
@@ -48,10 +48,10 @@ done
 
 # First get uname entries that we use below
 
-MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
-RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
-SYSTEM=`(uname -s) 2>/dev/null`  || SYSTEM="unknown"
-VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
+[ "$MACHINE" ] || MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
+[ "$RELEASE" ] || RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
+[ "$SYSTEM" ] || SYSTEM=`(uname -s) 2>/dev/null`  || SYSTEM="unknown"
+[ "$BUILD" ] || VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
 
 
 # Now test for ISC and SCO, since it is has a braindamaged uname.
@@ -122,6 +122,14 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
        echo "${MACHINE}-ibm-aix3"; exit 0
        ;;
 
+    BeOS:*:BePC)
+    if [ -e /boot/develop/headers/be/bone ]; then
+               echo "beos-x86-bone"; exit 0
+       else
+               echo "beos-x86-r5"; exit 0
+       fi
+       ;;
+
     dgux:*)
        echo "${MACHINE}-dg-dgux"; exit 0
        ;;
@@ -270,7 +278,7 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
                echo "ppc-apple-darwin${VERSION}"
                ;;
            *)
-               echo "i386-apple-darwin${VERSION}"
+               echo "i686-apple-darwin${VERSION}"
                ;;
        esac
        exit 0
@@ -362,6 +370,10 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
     NONSTOP_KERNEL*)
        echo "nsr-tandem-nsk"; exit 0;
        ;;
+
+    vxworks*)
+       echo "${MACHINE}-whatever-vxworks"; exit 0;
+       ;;
 esac
 
 #
@@ -399,11 +411,8 @@ exit 0
 # this is where the translation occurs into SSLeay terms
 # ---------------------------------------------------------------------------
 
-# figure out if gcc is available and if so we use it otherwise
-# we fallback to whatever cc does on the system
 GCCVER=`(gcc -dumpversion) 2>/dev/null`
 if [ "$GCCVER" != "" ]; then
-  CC=gcc
   # then strip off whatever prefix egcs prepends the number with...
   # Hopefully, this will work for any future prefixes as well.
   GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'`
@@ -412,8 +421,17 @@ if [ "$GCCVER" != "" ]; then
   # major and minor version numbers.
   # peak single digit before and after first dot, e.g. 2.95.1 gives 29
   GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
-else
-  CC=cc
+fi
+
+# Only set CC if not supplied already
+if [ -z "$CC" ]; then
+# figure out if gcc is available and if so we use it otherwise
+# we fallback to whatever cc does on the system
+  if [ "$GCCVER" != "" ]; then
+    CC=gcc
+  else
+    CC=cc
+  fi
 fi
 GCCVER=${GCCVER:-0}
 if [ "$SYSTEM" = "HP-UX" ];then
@@ -482,6 +500,12 @@ echo Operating system: $GUESSOS
 # script above so we end up with values in vars but that would take
 # more time that I want to waste at the moment
 case "$GUESSOS" in
+  uClinux*64*)
+    OUT=uClinux-dist64
+       ;;
+  uClinux*)
+    OUT=uClinux-dist
+       ;;
   mips2-sgi-irix)
        CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
        CPU=${CPU:-0}
@@ -517,8 +541,28 @@ case "$GUESSOS" in
        OUT="irix-mips3-$CC"
        ;;
   ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
-  ppc-apple-darwin*) OUT="darwin-ppc-cc" ;;
-  i386-apple-darwin*) OUT="darwin-i386-cc" ;;
+  ppc-apple-darwin*)
+       ISA64=`(sysctl -n hw.optional.64bitops) 2>/dev/null`
+       if [ "$ISA64" = "1" ]; then
+           echo "WARNING! If you wish to build 64-bit library, then you have to"
+           echo "         invoke './Configure darwin64-ppc-cc' *manually*."
+           if [ "$TEST" = "false" -a -t 1 ]; then
+             echo "         You have about 5 seconds to press Ctrl-C to abort."
+             (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+           fi
+       fi
+       OUT="darwin-ppc-cc" ;;
+  i?86-apple-darwin*)
+       ISA64=`(sysctl -n hw.optional.x86_64) 2>/dev/null`
+       if [ "$ISA64" = "1" ]; then
+           echo "WARNING! If you wish to build 64-bit library, then you have to"
+           echo "         invoke './Configure darwin64-x86_64-cc' *manually*."
+           if [ "$TEST" = "false" -a -t 1 ]; then
+             echo "         You have about 5 seconds to press Ctrl-C to abort."
+             (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+           fi
+       fi
+       OUT="darwin-i386-cc" ;;
   alpha-*-linux2)
         ISA=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo`
        case ${ISA:-generic} in
@@ -543,6 +587,8 @@ case "$GUESSOS" in
        OUT="linux-ppc"
        ;;
   ppc-*-linux2) OUT="linux-ppc" ;;
+  ppc60x-*-vxworks*) OUT="vxworks-ppc60x" ;;
+  ppcgen-*-vxworks*) OUT="vxworks-ppcgen" ;;
   ia64-*-linux?) OUT="linux-ia64" ;;
   sparc64-*-linux2)
        echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
@@ -583,25 +629,41 @@ case "$GUESSOS" in
 
        options="$options -DB_ENDIAN -mschedule=$CPUSCHEDULE -march=$CPUARCH"
        OUT="linux-generic32" ;;
-  arm*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
-  arm*l-*-linux2) OUT="linux-generic32"; options="$options -DL_ENDIAN" ;;
-  s390*-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN -DNO_ASM" ;;
+  armv[1-3]*-*-linux2) OUT="linux-generic32" ;;
+  armv[7-9]*-*-linux2) OUT="linux-armv4"; options="$options -march=armv7-a" ;;
+  arm*-*-linux2) OUT="linux-armv4" ;;
+  sh*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
+  sh*-*-linux2)  OUT="linux-generic32"; options="$options -DL_ENDIAN" ;;
+  m68k*-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
+  s390-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
+  s390x-*-linux2)
+       # To be uncommented when glibc bug is fixed, see Configure...
+       #if egrep -e '^features.* highgprs' /proc/cpuinfo >/dev/null ; then
+       #  echo "WARNING! If you wish to build \"highgprs\" 32-bit library, then you"
+       #  echo "         have to invoke './Configure linux32-s390x' *manually*."
+       #  if [ "$TEST" = "false" -a -t -1 ]; then
+       #    echo "         You have about 5 seconds to press Ctrl-C to abort."
+       #    (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+       #  fi
+       #fi
+       OUT="linux64-s390x"
+       ;;
   x86_64-*-linux?) OUT="linux-x86_64" ;;
   *86-*-linux2) OUT="linux-elf"
        if [ "$GCCVER" -gt 28 ]; then
           if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then
-           options="$options -mcpu=pentium"
+           options="$options -march=pentium"
           fi
           if grep '^model.*Pentium Pro' /proc/cpuinfo >/dev/null ; then
-           options="$options -mcpu=pentiumpro"
+           options="$options -march=pentiumpro"
           fi
           if grep '^model.*K6' /proc/cpuinfo >/dev/null ; then
-           options="$options -mcpu=k6"
+           options="$options -march=k6"
           fi
         fi ;;
   *-*-linux1) OUT="linux-aout" ;;
   *-*-linux2) OUT="linux-generic32" ;;
-  sun4u*-*-solaris2)
+  sun4[uv]*-*-solaris2)
        OUT="solaris-sparcv9-$CC"
        ISA64=`(isalist) 2>/dev/null | grep sparcv9`
        if [ "$ISA64" != "" ]; then
@@ -652,8 +714,8 @@ case "$GUESSOS" in
   *-*-sunos4)          OUT="sunos-$CC" ;;
 
   *86*-*-bsdi4)                OUT="BSD-x86-elf"; options="$options no-sse2 -ldl" ;;
-  alpha*-*-*bsd*)      OUT="BSD-generic64; options="$options -DL_ENDIAN" ;;
-  powerpc64-*-*bsd*)   OUT="BSD-generic64; options="$options -DB_ENDIAN" ;;
+  alpha*-*-*bsd*)      OUT="BSD-generic64"; options="$options -DL_ENDIAN" ;;
+  powerpc64-*-*bsd*)   OUT="BSD-generic64"; options="$options -DB_ENDIAN" ;;
   sparc64-*-*bsd*)     OUT="BSD-sparc64" ;;
   ia64-*-*bsd*)                OUT="BSD-ia64" ;;
   amd64-*-*bsd*)       OUT="BSD-x86_64" ;;
@@ -692,20 +754,17 @@ case "$GUESSOS" in
        if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then
            OUT="hpux64-parisc2-gcc"
        fi
-       KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
+       [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
        KERNEL_BITS=${KERNEL_BITS:-32}
        CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
        CPU_VERSION=${CPU_VERSION:-0}
        # See <sys/unistd.h> for further info on CPU_VERSION.
        if   [ $CPU_VERSION -ge 768 ]; then     # IA-64 CPU
-            echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi."
-            echo "         If you wish to build 32-bit library, the you have to"
-            echo "         invoke './Configure hpux-ia64-cc' *manually*."
-            if [ "$TEST" = "false" -a -t 1 ]; then
-               echo "         You have about 5 seconds to press Ctrl-C to abort."
-               (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
-            fi
-            OUT="hpux64-ia64-cc"
+            if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
+               OUT="hpux64-ia64-cc"
+             else
+               OUT="hpux-ia64-cc"
+             fi
        elif [ $CPU_VERSION -ge 532 ]; then     # PA-RISC 2.x CPU
             OUT=${OUT:-"hpux-parisc2-${CC}"}
             if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
@@ -717,20 +776,24 @@ case "$GUESSOS" in
                fi
             fi
        elif [ $CPU_VERSION -ge 528 ]; then     # PA-RISC 1.1+ CPU
-            OUT="hpux-parisc-${CC}
+            OUT="hpux-parisc-${CC}"
        elif [ $CPU_VERSION -ge 523 ]; then     # PA-RISC 1.0 CPU
-            OUT="hpux-parisc-${CC}
+            OUT="hpux-parisc-${CC}"
        else                                    # Motorola(?) CPU
             OUT="hpux-$CC"
        fi
        options="$options -D_REENTRANT" ;;
   *-hpux)      OUT="hpux-parisc-$CC" ;;
   *-aix)
-       KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
+       [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
        KERNEL_BITS=${KERNEL_BITS:-32}
        OBJECT_MODE=${OBJECT_MODE:-32}
        if [ "$CC" = "gcc" ]; then
            OUT="aix-gcc"
+          if [ $OBJECT_MODE -eq 64 ]; then
+            echo 'Your $OBJECT_MODE was found to be set to 64'
+            OUT="aix64-gcc"
+          fi
        elif [ $OBJECT_MODE -eq 64 ]; then
            echo 'Your $OBJECT_MODE was found to be set to 64' 
            OUT="aix64-cc"
@@ -745,7 +808,7 @@ case "$GUESSOS" in
                fi
            fi
        fi
-       if (lsattr -E -O -l proc0 | grep -i powerpc) >/dev/null 2>&1; then
+       if (lsattr -E -O -l `lsdev -c processor|awk '{print$1;exit}'` | grep -i powerpc) >/dev/null 2>&1; then
            :   # this applies even to Power3 and later, as they return PowerPC_POWER[345]
        else
            options="$options no-asm"
@@ -759,6 +822,10 @@ case "$GUESSOS" in
   t3e-cray-unicosmk) OUT="cray-t3e" ;;
   j90-cray-unicos) OUT="cray-j90" ;;
   nsr-tandem-nsk) OUT="tandem-c89" ;;
+  beos-*) OUT="$GUESSOS" ;;
+  x86pc-*-qnx6) OUT="QNX6-i386" ;;
+  *-*-qnx6) OUT="QNX6" ;;
+  armv[7-9]*-*-android) OUT="android-armv7" ;;
   *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
 esac
 
@@ -774,7 +841,12 @@ esac
 #  options="$options -DATALLA"
 #fi
 
-# gcc < 2.8 does not support -mcpu=ultrasparc
+! expr "$options" : '.*no\-asm' > /dev/null && \
+($CC -Wa,--help -c -o /dev/null -x assembler /dev/null 2>&1 | \
+ grep \\--noexecstack) 2>&1 > /dev/null && \
+  options="$options -Wa,--noexecstack"
+
+# gcc < 2.8 does not support -march=ultrasparc
 if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
 then
   echo "WARNING! Falling down to 'solaris-sparcv8-gcc'."
@@ -794,7 +866,7 @@ case "$GUESSOS" in
   i386-*) options="$options 386" ;;
 esac
 
-for i in bf cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 aes ripemd rsa sha
+for i in aes bf camellia cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa seed sha
 do
   if [ ! -d crypto/$i ]
   then