#include <conio.h>
#endif
+#ifdef OPENSSL_SYS_WINCE
+/* Windows CE incorrectly defines fileno as returning void*, so to avoid problems below... */
+#ifdef fileno
+#undef fileno
+#endif
+#define fileno(a) (int)_fileno(a)
+#endif
+
#if (defined(OPENSSL_SYS_VMS) && __VMS_VER < 70000000)
/* FIONBIO used as a switch to enable ioctl, and that isn't in VMS < 7.0 */
BIO_printf(bio_err," -starttls prot - use the STARTTLS command before starting TLS\n");
BIO_printf(bio_err," for those protocols that support it, where\n");
BIO_printf(bio_err," 'prot' defines which one to assume. Currently,\n");
- BIO_printf(bio_err," only \"smtp\" is supported.\n");
+ BIO_printf(bio_err," only \"smtp\" and \"pop3\" are supported.\n");
+#ifndef OPENSSL_NO_ENGINE
BIO_printf(bio_err," -engine id - Initialise and use the specified engine\n");
+#endif
BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
}
int write_tty,read_tty,write_ssl,read_ssl,tty_on,ssl_pending;
SSL_CTX *ctx=NULL;
int ret=1,in_init=1,i,nbio_test=0;
- int smtp_starttls = 0;
+ int starttls_proto = 0;
int prexit = 0, vflags = 0;
SSL_METHOD *meth=NULL;
BIO *sbio;
char *inrand=NULL;
+#ifndef OPENSSL_NO_ENGINE
char *engine_id=NULL;
ENGINE *e=NULL;
+#endif
#ifdef OPENSSL_SYS_WINDOWS
struct timeval tv;
#endif
if (bio_err == NULL)
bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
+ if (!load_config(bio_err, NULL))
+ goto end;
+
if ( ((cbuf=OPENSSL_malloc(BUFSIZZ)) == NULL) ||
((sbuf=OPENSSL_malloc(BUFSIZZ)) == NULL) ||
((mbuf=OPENSSL_malloc(BUFSIZZ)) == NULL))
if (--argc < 1) goto bad;
++argv;
if (strcmp(*argv,"smtp") == 0)
- smtp_starttls = 1;
+ starttls_proto = 1;
+ else if (strcmp(*argv,"pop3") == 0)
+ starttls_proto = 2;
else
goto bad;
}
+#ifndef OPENSSL_NO_ENGINE
else if (strcmp(*argv,"-engine") == 0)
{
if (--argc < 1) goto bad;
engine_id = *(++argv);
}
+#endif
else if (strcmp(*argv,"-rand") == 0)
{
if (--argc < 1) goto bad;
goto end;
}
+ OpenSSL_add_ssl_algorithms();
+ SSL_load_error_strings();
+
+#ifndef OPENSSL_NO_ENGINE
+ e = setup_engine(bio_err, engine_id, 1);
+#endif
+
if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
&& !RAND_status())
{
}
}
- OpenSSL_add_ssl_algorithms();
- SSL_load_error_strings();
-
- e = setup_engine(bio_err, engine_id, 1);
-
ctx=SSL_CTX_new(meth);
if (ctx == NULL)
{
sbuf_off=0;
/* This is an ugly hack that does a lot of assumptions */
- if (smtp_starttls)
+ if (starttls_proto == 1)
{
BIO_read(sbio,mbuf,BUFSIZZ);
BIO_printf(sbio,"STARTTLS\r\n");
BIO_read(sbio,sbuf,BUFSIZZ);
}
+ if (starttls_proto == 2)
+ {
+ BIO_read(sbio,mbuf,BUFSIZZ);
+ BIO_printf(sbio,"STLS\r\n");
+ BIO_read(sbio,sbuf,BUFSIZZ);
+ }
for (;;)
{
print_stuff(bio_c_out,con,full_log);
if (full_log > 0) full_log--;
- if (smtp_starttls)
+ if (starttls_proto)
{
BIO_printf(bio_err,"%s",mbuf);
/* We don't need to know any more */
- smtp_starttls = 0;
+ starttls_proto = 0;
}
if (reconnect)
tv.tv_usec = 0;
i=select(width,(void *)&readfds,(void *)&writefds,
NULL,&tv);
+#ifdef OPENSSL_SYS_WINCE
+ if(!i && (!_kbhit() || !read_tty) ) continue;
+#else
if(!i && (!((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0))) || !read_tty) ) continue;
+#endif
} else i=select(width,(void *)&readfds,(void *)&writefds,
NULL,NULL);
}
goto shut;
}
}
-#ifdef OPENSSL_SYS_WINDOWS
- /* Assume Windows can always write */
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
+ /* Assume Windows/DOS can always write */
else if (!ssl_pending && write_tty)
#else
else if (!ssl_pending && FD_ISSET(fileno(stdout),&writefds))
}
#ifdef OPENSSL_SYS_WINDOWS
+#ifdef OPENSSL_SYS_WINCE
+ else if (_kbhit())
+#else
else if ((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0)))
+#endif
#else
else if (FD_ISSET(fileno(stdin),&readfds))
#endif
if (con != NULL) SSL_free(con);
if (con2 != NULL) SSL_free(con2);
if (ctx != NULL) SSL_CTX_free(ctx);
- if (cbuf != NULL) { memset(cbuf,0,BUFSIZZ); OPENSSL_free(cbuf); }
- if (sbuf != NULL) { memset(sbuf,0,BUFSIZZ); OPENSSL_free(sbuf); }
- if (mbuf != NULL) { memset(mbuf,0,BUFSIZZ); OPENSSL_free(mbuf); }
+ if (cbuf != NULL) { OPENSSL_cleanse(cbuf,BUFSIZZ); OPENSSL_free(cbuf); }
+ if (sbuf != NULL) { OPENSSL_cleanse(sbuf,BUFSIZZ); OPENSSL_free(sbuf); }
+ if (mbuf != NULL) { OPENSSL_cleanse(mbuf,BUFSIZZ); OPENSSL_free(mbuf); }
if (bio_c_out != NULL)
{
BIO_free(bio_c_out);
bio_c_out=NULL;
}
apps_shutdown();
- EXIT(ret);
+ OPENSSL_EXIT(ret);
}
for (i=0; i<sk_X509_num(sk); i++)
{
X509_NAME_oneline(X509_get_subject_name(
- sk_X509_value(sk,i)),buf,BUFSIZ);
+ sk_X509_value(sk,i)),buf,sizeof buf);
BIO_printf(bio,"%2d s:%s\n",i,buf);
X509_NAME_oneline(X509_get_issuer_name(
- sk_X509_value(sk,i)),buf,BUFSIZ);
+ sk_X509_value(sk,i)),buf,sizeof buf);
BIO_printf(bio," i:%s\n",buf);
if (c_showcerts)
PEM_write_bio_X509(bio,sk_X509_value(sk,i));
if (!(c_showcerts && got_a_chain)) /* Redundant if we showed the whole chain */
PEM_write_bio_X509(bio,peer);
X509_NAME_oneline(X509_get_subject_name(peer),
- buf,BUFSIZ);
+ buf,sizeof buf);
BIO_printf(bio,"subject=%s\n",buf);
X509_NAME_oneline(X509_get_issuer_name(peer),
- buf,BUFSIZ);
+ buf,sizeof buf);
BIO_printf(bio,"issuer=%s\n",buf);
}
else
{
BIO_printf(bio,"---\nNo client certificate CA names sent\n");
}
- p=SSL_get_shared_ciphers(s,buf,BUFSIZ);
+ p=SSL_get_shared_ciphers(s,buf,sizeof buf);
if (p != NULL)
{
/* This works only for SSL 2. In later protocol
projects / openssl.git / blobdiff