$! DECC For DEC C.
$! GNUC For GNU C.
$!
-$! If you don't speficy a compiler, it will try to determine which
+$! If you don't specify a compiler, it will try to determine which
$! "C" compiler to use.
$!
$! P3, if defined, sets a TCP/IP library to use, through one of the following
$!
$! P5, if defined, sets a choice of programs to compile.
$!
-$! For 64 bit architectures (Alpha and IA64), specify the pointer size as P6.
-$! For 32 bit architectures (VAX), P6 is ignored.
-$! Currently supported values are:
+$! P6, if defined, specifies the C pointer size. Ignored on VAX.
+$! ("64=ARGV" gives more efficient code with HP C V7.3 or newer.)
+$! Supported values are:
$!
-$! 32 To ge a library compiled with /POINTER_SIZE=32
-$! 64 To ge a library compiled with /POINTER_SIZE=64
+$! "" Compile with default (/NOPOINTER_SIZE)
+$! 32 Compile with /POINTER_SIZE=32 (SHORT)
+$! 64 Compile with /POINTER_SIZE=64[=ARGV] (LONG[=ARGV])
+$! (Automatically select ARGV if compiler supports it.)
+$! 64= Compile with /POINTER_SIZE=64 (LONG).
+$! 64=ARGV Compile with /POINTER_SIZE=64=ARGV (LONG=ARGV).
$!
+$! P7, if defined, specifies a directory where ZLIB files (zlib.h,
+$! libz.olb) may be found. Optionally, a non-default object library
+$! name may be included ("dev:[dir]libz_64.olb", for example).
+$!
+$!
+$! Announce/identify.
+$!
+$ proc = f$environment( "procedure")
+$ write sys$output "@@@ "+ -
+ f$parse( proc, , , "name")+ f$parse( proc, , , "type")
+$!
+$ on control_c then goto exit
$!
$! Define A TCP/IP Library That We Will Need To Link To.
$! (That Is, If We Need To Link To One.)
$!
$ TCPIP_LIB = ""
+$ ZLIB_LIB = ""
$!
$! Check What Architecture We Are Using.
$!
$!
$! The Architecture Is VAX.
$!
-$ ARCH := VAX
+$ ARCH = "VAX"
$!
$! Else...
$!
$!
$ ENDIF
$!
+$ ARCHD = ARCH
+$ LIB32 = "32"
+$ OPT_FILE = ""
+$ POINTER_SIZE = ""
+$!
$! Define what programs should be compiled
$!
$ PROGRAMS := OPENSSL
$!
+$! Check To Make Sure We Have Valid Command Line Parameters.
+$!
+$ GOSUB CHECK_OPTIONS
+$!
$! Define The CRYPTO Library.
$!
-$ CRYPTO_LIB := SYS$DISK:[-.'ARCH'.EXE.CRYPTO]LIBCRYPTO'LIB32'.OLB
+$ CRYPTO_LIB := SYS$DISK:[-.'ARCHD'.EXE.CRYPTO]SSL_LIBCRYPTO'LIB32'.OLB
$!
$! Define The SSL Library.
$!
-$ SSL_LIB := SYS$DISK:[-.'ARCH'.EXE.SSL]LIBSSL'LIB32'.OLB
+$ SSL_LIB := SYS$DISK:[-.'ARCHD'.EXE.SSL]SSL_LIBSSL'LIB32'.OLB
$!
-$! Define The OBJ Directory.
+$! Define The OBJ and EXE Directories.
$!
-$ OBJ_DIR := SYS$DISK:[-.'ARCH'.OBJ.APPS]
+$ OBJ_DIR := SYS$DISK:[-.'ARCHD'.OBJ.APPS]
+$ EXE_DIR := SYS$DISK:[-.'ARCHD'.EXE.APPS]
$!
-$! Define The EXE Directory.
+$! Specify the destination directory in any /MAP option.
$!
-$ EXE_DIR := SYS$DISK:[-.'ARCH'.EXE.APPS]
+$ if (LINKMAP .eqs. "MAP")
+$ then
+$ LINKMAP = LINKMAP+ "=''EXE_DIR'"
+$ endif
$!
-$! Check To Make Sure We Have Valid Command Line Parameters.
+$! Add the location prefix to the linker options file name.
$!
-$ GOSUB CHECK_OPTIONS
+$ if (OPT_FILE .nes. "")
+$ then
+$ OPT_FILE = EXE_DIR+ OPT_FILE
+$ endif
$!
$! Initialise logical names and such
$!
$!
$! Tell The User What Kind of Machine We Run On.
$!
-$ WRITE SYS$OUTPUT "Compiling On A ",ARCH," Machine."
+$ WRITE SYS$OUTPUT "Host system architecture: ''ARCHD'"
$!
$! Check To See If The OBJ Directory Exists.
$!
$! reflect the E_OBJ variable in Makefile as closely as possible, thereby
$! making it fairly easy to verify that the lists are the same.
$!
-$ LIB_OPENSSL = "VERIFY,ASN1PARS,REQ,DGST,DH,DHPARAM,ENC,PASSWD,GENDH,ERRSTR,"+-
+$ LIB_OPENSSL = "VERIFY,ASN1PARS,REQ,DGST,DHPARAM,ENC,PASSWD,ERRSTR,"+-
"CA,PKCS7,CRL2P7,CRL,"+-
"RSA,RSAUTL,DSA,DSAPARAM,EC,ECPARAM,"+-
"X509,GENRSA,GENDSA,GENPKEY,S_SERVER,S_CLIENT,SPEED,"+-
"S_TIME,APPS,S_CB,S_SOCKET,APP_RAND,VERSION,SESS_ID,"+-
"CIPHERS,NSEQ,PKCS12,PKCS8,PKEY,PKEYPARAM,PKEYUTL,"+ -
- "SPKAC,SMIME,CMS,RAND,ENGINE,OCSP,PRIME,TS"
+ "SPKAC,SMIME,CMS,RAND,ENGINE,OCSP,PRIME,TS,SRP"
+$!
+$ LIB_OPENSSL = LIB_OPENSSL+ ",VMS_DECC_INIT"
+$!
$ TCPIP_PROGRAMS = ",,"
$ IF COMPILER .EQS. "VAXC" THEN -
TCPIP_PROGRAMS = ",OPENSSL,"
$!
$! Create a .OPT file for the object files
$!
-$ OPEN/WRITE OBJECTS 'EXE_DIR''CURRENT_APP'.OPT
+$ OPEN /WRITE OBJECTS 'EXE_DIR''CURRENT_APP'.OPT
$!
$! Top Of The File Loop.
$!
$ ENDIF
$!
$! Link The Program.
-$! Check To See If We Are To Link With A Specific TCP/IP Library.
$!
$ ON WARNING THEN GOTO NEXT_APP
$!
-$ IF (TCPIP_LIB.NES."")
-$ THEN
-$!
$! Don't Link With The RSAREF Routines And TCP/IP Library.
$!
-$ LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
- 'EXE_DIR''CURRENT_APP'.OPT/OPTION, -
- 'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
- 'TCPIP_LIB','OPT_FILE'/OPTION
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Don't Link With The RSAREF Routines And Link With A TCP/IP Library.
-$!
-$ LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
- 'EXE_DIR''CURRENT_APP'.OPT/OPTION, -
- 'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
- 'OPT_FILE'/OPTION
-$!
-$! End The TCP/IP Library Check.
-$!
-$ ENDIF
+$ LINK /'DEBUGGER' /'LINKMAP' /'TRACEBACK' /EXE='EXE_FILE' -
+ 'EXE_DIR''CURRENT_APP'.OPT /OPTIONS, -
+ 'SSL_LIB' /LIBRARY, -
+ 'CRYPTO_LIB' /LIBRARY -
+ 'TCPIP_LIB' -
+ 'ZLIB_LIB' -
+ ,'OPT_FILE' /OPTIONS
$!
$! Go Back And Do It Again.
$!
$ CREATE 'OPT_FILE'
$DECK
!
-! Default System Options File To Link Agianst
+! Default System Options File To Link Against
! The Sharable VAX C Runtime Library.
!
SYS$SHARE:VAXCRTL.EXE/SHARE
$ CREATE 'OPT_FILE'
$DECK
!
-! Default System Options File To Link Agianst
+! Default System Options File To Link Against
! The Sharable C Runtime Library.
!
GNU_CC:[000000]GCCLIB/LIBRARY
$ CREATE 'OPT_FILE'
$DECK
!
-! Default System Options File To Link Agianst
+! Default System Options File To Link Against
! The Sharable DEC C Runtime Library.
!
SYS$SHARE:DECC$SHR.EXE/SHARE
$ CREATE 'OPT_FILE'
$DECK
!
-! Default System Options File For non-VAX To Link Agianst
+! Default System Options File For non-VAX To Link Against
! The Sharable C Runtime Library.
!
SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE
$ IF (P1.EQS."NODEBUG")
$ THEN
$!
-$! P1 Is NODEBUG, So Compile Without Debugger Information.
+$! P1 Is NODEBUG, So Compile Without Debugger Information.
$!
-$ DEBUGGER = "NODEBUG"
-$ TRACEBACK = "NOTRACEBACK"
-$ GCC_OPTIMIZE = "OPTIMIZE"
-$ CC_OPTIMIZE = "OPTIMIZE"
-$ WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile."
-$ WRITE SYS$OUTPUT "Compiling With Compiler Optimization."
+$ DEBUGGER = "NODEBUG"
+$ LINKMAP = "NOMAP"
+$ TRACEBACK = "NOTRACEBACK"
+$ GCC_OPTIMIZE = "OPTIMIZE"
+$ CC_OPTIMIZE = "OPTIMIZE"
+$ WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile."
+$ WRITE SYS$OUTPUT "Compiling With Compiler Optimization."
$!
$! Else...
$!
$! Compile With Debugger Information.
$!
$ DEBUGGER = "DEBUG"
+$ LINKMAP = "MAP"
$ TRACEBACK = "TRACEBACK"
$ GCC_OPTIMIZE = "NOOPTIMIZE"
$ CC_OPTIMIZE = "NOOPTIMIZE"
$ WRITE SYS$OUTPUT "Compiling Without Compiler Optimization."
$ ELSE
$!
-$! Tell The User Entered An Invalid Option..
+$! Tell The User Entered An Invalid Option.
$!
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT "The Option ",P1," Is Invalid. The Valid Options Are:"
$!
$ EXIT
$!
-$! End The Valid Arguement Check.
+$! End The Valid Argument Check.
$!
$ ENDIF
$!
$!
$ ENDIF
$!
-$! Check To See If P6 Is Blank.
+$! Check P6 (POINTER_SIZE).
$!
-$ IF (P6.EQS."")
+$ IF (P6 .NES. "") .AND. (ARCH .NES. "VAX")
$ THEN
-$ POINTER_SIZE = ""
-$ ELSE
-$!
-$! Check is P6 Is Valid
$!
-$ IF (P6.EQS."32")
+$ IF (P6 .EQS. "32")
$ THEN
-$ POINTER_SIZE = "/POINTER_SIZE=32"
-$ IF ARCH .EQS. "VAX"
-$ THEN
-$ LIB32 = ""
-$ ELSE
-$ LIB32 = "32"
-$ ENDIF
+$ POINTER_SIZE = " /POINTER_SIZE=32"
$ ELSE
-$ IF (P6.EQS."64")
+$ POINTER_SIZE = F$EDIT( P6, "COLLAPSE, UPCASE")
+$ IF ((POINTER_SIZE .EQS. "64") .OR. -
+ (POINTER_SIZE .EQS. "64=") .OR. -
+ (POINTER_SIZE .EQS. "64=ARGV"))
$ THEN
+$ ARCHD = ARCH+ "_64"
$ LIB32 = ""
-$ IF ARCH .EQS. "VAX"
+$ IF (F$EXTRACT( 2, 1, POINTER_SIZE) .EQS. "=")
$ THEN
-$ POINTER_SIZE = "/POINTER_SIZE=32"
+$! Explicit user choice: "64" or "64=ARGV".
+$ IF (POINTER_SIZE .EQS. "64=") THEN POINTER_SIZE = "64"
$ ELSE
-$ POINTER_SIZE = "/POINTER_SIZE=64"
+$ SET NOON
+$ DEFINE /USER_MODE SYS$OUTPUT NL:
+$ DEFINE /USER_MODE SYS$ERROR NL:
+$ CC /NOLIST /NOOBJECT /POINTER_SIZE=64=ARGV NL:
+$ IF ($STATUS .AND. %X0FFF0000) .EQ. %X00030000
+$ THEN
+$ ! If we got here, it means DCL complained like this:
+$ ! %DCL-W-NOVALU, value not allowed - remove value specification
+$ ! \64=\
+$ !
+$ ! If the compiler was run, logicals defined in /USER would
+$ ! have been deassigned automatically. However, when DCL
+$ ! complains, they aren't, so we do it here (it might be
+$ ! unnecessary, but just in case there will be another error
+$ ! message further on that we don't want to miss)
+$ DEASSIGN /USER_MODE SYS$ERROR
+$ DEASSIGN /USER_MODE SYS$OUTPUT
+$ ELSE
+$ POINTER_SIZE = POINTER_SIZE + "=ARGV"
+$ ENDIF
+$ SET ON
$ ENDIF
+$ POINTER_SIZE = " /POINTER_SIZE=''POINTER_SIZE'"
+$!
$ ELSE
$!
-$! Tell The User Entered An Invalid Option..
+$! Tell The User Entered An Invalid Option.
$!
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P6," Is Invalid. The Valid Options Are:"
+$ WRITE SYS$OUTPUT "The Option ", P6, -
+ " Is Invalid. The Valid Options Are:"
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " 32 : Compile with 32 bit pointer size"
-$ WRITE SYS$OUTPUT " 64 : Compile with 64 bit pointer size"
+$ WRITE SYS$OUTPUT -
+ " """" : Compile with default (short) pointers."
+$ WRITE SYS$OUTPUT -
+ " 32 : Compile with 32-bit (short) pointers."
+$ WRITE SYS$OUTPUT -
+ " 64 : Compile with 64-bit (long) pointers (auto ARGV)."
+$ WRITE SYS$OUTPUT -
+ " 64= : Compile with 64-bit (long) pointers (no ARGV)."
+$ WRITE SYS$OUTPUT -
+ " 64=ARGV : Compile with 64-bit (long) pointers (ARGV)."
$ WRITE SYS$OUTPUT ""
-$!
+$!
$! Time To EXIT.
$!
-$ GOTO TIDY
-$!
-$! End The Valid Arguement Check.
+$ EXIT
$!
$ ENDIF
+$!
$ ENDIF
$!
-$! End The P6 Check.
+$! End The P6 (POINTER_SIZE) Check.
$!
$ ENDIF
$!
+$! Set basic C compiler /INCLUDE directories.
+$!
+$ CC_INCLUDES = "SYS$DISK:[-],SYS$DISK:[-.CRYPTO]"
+$!
$! Check To See If P2 Is Blank.
$!
$ IF (P2.EQS."")
$ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS
$ CCEXTRAFLAGS = ""
$ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS
-$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR"
+$ CCDISABLEWARNINGS = "" !!! "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR"
$ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN -
CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS
$!
-$! Check To See If The User Entered A Valid Paramter.
+$! Check To See If We Have A ZLIB Option.
+$!
+$ ZLIB = P7
+$ IF (ZLIB .NES. "")
+$ THEN
+$!
+$! Check for expected ZLIB files.
+$!
+$ err = 0
+$ file1 = f$parse( "zlib.h", ZLIB, , , "SYNTAX_ONLY")
+$ if (f$search( file1) .eqs. "")
+$ then
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
+$ WRITE SYS$OUTPUT " Can't find header: ''file1'"
+$ err = 1
+$ endif
+$ file1 = f$parse( "A.;", ZLIB)- "A.;"
+$!
+$ file2 = f$parse( ZLIB, "libz.olb", , , "SYNTAX_ONLY")
+$ if (f$search( file2) .eqs. "")
+$ then
+$ if (err .eq. 0)
+$ then
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
+$ endif
+$ WRITE SYS$OUTPUT " Can't find library: ''file2'"
+$ WRITE SYS$OUTPUT ""
+$ err = err+ 2
+$ endif
+$ if (err .eq. 1)
+$ then
+$ WRITE SYS$OUTPUT ""
+$ endif
+$!
+$ if (err .ne. 0)
+$ then
+$ EXIT
+$ endif
+$!
+$ CCDEFS = """ZLIB=1"", "+ CCDEFS
+$ CC_INCLUDES = CC_INCLUDES+ ", "+ file1
+$ ZLIB_LIB = ", ''file2' /library"
+$!
+$! Print info
+$!
+$ WRITE SYS$OUTPUT "ZLIB library spec: ", file2
+$!
+$! End The ZLIB Check.
+$!
+$ ENDIF
+$!
+$! Check To See If The User Entered A Valid Parameter.
$!
$ IF (P2.EQS."VAXC").OR.(P2.EQS."DECC").OR.(P2.EQS."GNUC")
$ THEN
$ CC = "CC"
$ IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
THEN CC = "CC/DECC"
-$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89''POINTER_SIZE'" + -
- "/NOLIST/PREFIX=ALL" + -
- "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
+$ CC = CC + " /''CC_OPTIMIZE' /''DEBUGGER' /STANDARD=RELAXED"+ -
+ "''POINTER_SIZE' /NOLIST /PREFIX=ALL" + -
+ " /INCLUDE=(''CC_INCLUDES') " + CCEXTRAFLAGS
$!
$! Define The Linker Options File Name.
$!
-$ OPT_FILE = "''EXE_DIR'VAX_DECC_OPTIONS.OPT"
+$ OPT_FILE = "VAX_DECC_OPTIONS.OPT"
$!
$! End DECC Check.
$!
$ ENDIF
$ IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
- "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
+ "/INCLUDE=(''CC_INCLUDES')" + CCEXTRAFLAGS
$ CCDEFS = CCDEFS + ",""VAXC"""
$!
$! Define <sys> As SYS$COMMON:[SYSLIB]
$!
$! Define The Linker Options File Name.
$!
-$ OPT_FILE = "''EXE_DIR'VAX_VAXC_OPTIONS.OPT"
+$ OPT_FILE = "VAX_VAXC_OPTIONS.OPT"
$!
$! End VAXC Check
$!
$!
$ IF F$TYPE(GCC) .EQS. "" THEN GCC := GCC
$ CC = GCC+"/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
- "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
+ "/INCLUDE=(''CC_INCLUDES')" + CCEXTRAFLAGS
$!
$! Define The Linker Options File Name.
$!
-$ OPT_FILE = "''EXE_DIR'VAX_GNUC_OPTIONS.OPT"
+$ OPT_FILE = "VAX_GNUC_OPTIONS.OPT"
$!
$! End The GNU C Check.
$!
$!
$ CCDEFS = """FLAT_INC=1""," + CCDEFS
$!
-$! Else The User Entered An Invalid Arguement.
+$! Else The User Entered An Invalid Argument.
$!
$ ELSE
$!
$!
$! Set the library to use SOCKETSHR
$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
+$ TCPIP_LIB = ",SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT /OPTIONS"
$!
$! Done with SOCKETSHR
$!
$!
$! Set the library to use UCX.
$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
+$ TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT /OPTIONS"
$ IF F$TRNLNM("UCX$IPC_SHR") .NES. ""
$ THEN
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT"
+$ TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT /OPTIONS"
$ ELSE
$ IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN -
- TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT/OPT"
+ TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT /OPTIONS"
$ ENDIF
$!
$! Done with UCX
$!
$! Set the library to use TCPIP.
$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
+$ TCPIP_LIB = ",SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT /OPTIONS"
$!
$! Done with TCPIP
$!
$!
$! Print info
$!
-$ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB
+$ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB- ","
$!
-$! Else The User Entered An Invalid Arguement.
+$! Else The User Entered An Invalid Argument.
$!
$ ELSE
$!
$ THEN
$ IF CCDISABLEWARNINGS .NES. ""
$ THEN
-$ CCDISABLEWARNINGS = "/WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))"
+$ CCDISABLEWARNINGS = " /WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))"
$ ENDIF
$ ELSE
$ CCDISABLEWARNINGS = ""
$ ENDIF
-$ CC2 = CC + "/DEFINE=(" + CCDEFS + ",_POSIX_C_SOURCE)" + CCDISABLEWARNINGS
-$ CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
+$ CC2 = CC + " /DEFINE=(" + CCDEFS + ",_POSIX_C_SOURCE)" + CCDISABLEWARNINGS
+$ CC = CC + " /DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
$!
$! Show user the result
$!
$!
$! Set up the logical name OPENSSL to point at the include directory
$!
-$ DEFINE OPENSSL/NOLOG '__INCLUDE'
+$ DEFINE OPENSSL /NOLOG '__INCLUDE'
$!
$! Done
$!
$!
$ CLEANUP:
$!
-$! Restore the logical name OPENSSL if it had a value
+$! Restore the saved logical name OPENSSL, if it had a value.
$!
-$ IF __SAVE_OPENSSL .EQS. ""
-$ THEN
-$ DEASSIGN OPENSSL
-$ ELSE
-$ DEFINE/NOLOG OPENSSL '__SAVE_OPENSSL'
-$ ENDIF
+$ if (f$type( __SAVE_OPENSSL) .nes. "")
+$ then
+$ IF __SAVE_OPENSSL .EQS. ""
+$ THEN
+$ DEASSIGN OPENSSL
+$ ELSE
+$ DEFINE /NOLOG OPENSSL '__SAVE_OPENSSL'
+$ ENDIF
+$ endif
+$!
+$! Close any open files.
+$!
+$ if (f$trnlnm( "objects", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
+ close objects
$!
$! Done
$!
$ RETURN
+$!
projects / openssl.git / blobdiff