ENGINES_ASM_OBJ=
PERLASM_SCHEME=
-# KRB5 stuff
-KRB5_INCLUDES=
-LIBKRB5=
-
# Zlib stuff
ZLIB_INCLUDE=
LIBZLIB=
des aes rc2 rc4 rc5 idea bf cast camellia seed modes \
bn ec rsa dsa ecdsa dh ecdh dso engine \
buffer bio stack lhash rand err \
- evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
+ evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui \
cms pqueue ts jpake srp store cmac
# keep in mind that the above list is adjusted by ./Configure
# according to no-xxx arguments...
$(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
$(INSTALL_PREFIX)$(OPENSSLDIR)/private
-all: Makefile build_all openssl.pc libssl.pc libcrypto.pc
+all: Makefile build_all
# as we stick to -e, CLEARENV ensures that local variables in lower
# Makefiles remain local and variable. $${VAR+VAR} is tribute to Korn
DEPFLAG='-DOPENSSL_NO_DEPRECATED $(DEPFLAG)' \
MAKEDEPPROG='$(MAKEDEPPROG)' \
SHARED_LDFLAGS='$(SHARED_LDFLAGS)' \
- KRB5_INCLUDES='$(KRB5_INCLUDES)' LIBKRB5='$(LIBKRB5)' \
ZLIB_INCLUDE='$(ZLIB_INCLUDE)' LIBZLIB='$(LIBZLIB)' \
EXE_EXT='$(EXE_EXT)' SHARED_LIBS='$(SHARED_LIBS)' \
SHLIB_EXT='$(SHLIB_EXT)' SHLIB_TARGET='$(SHLIB_TARGET)' \
build_all: build_libs build_apps build_tests build_tools
-build_libs: build_crypto build_ssl build_engines
+build_libs: build_libcrypto build_libssl openssl.pc
+
+build_libcrypto: build_crypto build_engines libcrypto.pc
+build_libssl: build_ssl libssl.pc
build_crypto:
@dir=crypto; target=all; $(BUILD_ONE_CMD)
do_$(SHLIB_TARGET):
@ set -e; libs='-L. $(SHLIBDEPS)'; for i in $(SHLIBDIRS); do \
- if [ "$$i" = "ssl" -a -n "$(LIBKRB5)" ]; then \
- libs="$(LIBKRB5) $$libs"; \
- fi; \
$(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \
LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
echo 'Requires: '; \
echo 'Libs: -L$${libdir} -lcrypto'; \
echo 'Libs.private: $(EX_LIBS)'; \
- echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc
+ echo 'Cflags: -I$${includedir}' ) > libcrypto.pc
libssl.pc: Makefile
@ ( echo 'prefix=$(INSTALLTOP)'; \
echo 'Requires.private: libcrypto'; \
echo 'Libs: -L$${libdir} -lssl'; \
echo 'Libs.private: $(EX_LIBS)'; \
- echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc
+ echo 'Cflags: -I$${includedir}' ) > libssl.pc
openssl.pc: Makefile
@ ( echo 'prefix=$(INSTALLTOP)'; \
[ -x "apps/openssl.exe" ] && OPENSSL="apps/openssl.exe" || :; \
OPENSSL_DEBUG_MEMORY=on; OPENSSL_CONF=/dev/null ; \
export OPENSSL OPENSSL_DEBUG_MEMORY OPENSSL_CONF; \
- $(PERL) tools/c_rehash certs/demo) && \
+ $$OPENSSL rehash certs/demo) && \
touch rehash.time; \
else :; fi
report:
@$(PERL) util/selftest.pl
+update: errors stacks util/libeay.num util/ssleay.num TABLE
+ @set -e; target=update; $(RECURSIVE_BUILD_CMD)
+
depend:
@set -e; target=depend; $(RECURSIVE_BUILD_CMD)
util/ssleay.num::
$(PERL) util/mkdef.pl ssl update
-crypto/objects/obj_dat.h: crypto/objects/obj_dat.pl include/openssl/obj_mac.h
- $(PERL) crypto/objects/obj_dat.pl include/openssl/obj_mac.h crypto/objects/obj_dat.h
-include/openssl/obj_mac.h: crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num
- $(PERL) crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num include/openssl/obj_mac.h
-crypto/objects/obj_xref.h: crypto/objects/objxref.pl crypto/objects/obj_xref.txt crypto/objects/obj_mac.num
- $(PERL) crypto/objects/objxref.pl crypto/objects/obj_mac.num crypto/objects/obj_xref.txt >crypto/objects/obj_xref.h
-
-apps/openssl-vms.cnf: apps/openssl.cnf
- $(PERL) VMS/VMSify-conf.pl < apps/openssl.cnf > apps/openssl-vms.cnf
-
-crypto/bn/bn_prime.h: crypto/bn/bn_prime.pl
- $(PERL) crypto/bn/bn_prime.pl >crypto/bn/bn_prime.h
-
-
TABLE: Configure Configurations/*.conf
(echo 'Output of `Configure TABLE'"':"; \
$(PERL) Configure TABLE) > TABLE
-update: errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h crypto/objects/obj_xref.h apps/openssl-vms.cnf crypto/bn/bn_prime.h TABLE depend
-
# Build distribution tar-file. As the list of files returned by "find" is
# pretty long, on several platforms a "too many arguments" error or similar
# would occur. Therefore the list of files is temporarily stored into a file
# and read directly, requiring GNU-Tar. Call "make TAR=gtar dist" if the normal
# tar does not support the --files-from option.
-tar:
+TAR_COMMAND=$(TAR) $(TARFLAGS) --files-from ../$(TARFILE).list \
+ --owner openssl:0 --group openssl:0 \
+ --transform 's|^|openssl-$(VERSION)/|' \
+ -cvf -
+
+../$(TARFILE).list:
+ find * \! -name STATUS \! -name TABLE \! -name '*.o' \! -name '*.a' \
+ \! -name '*.so' \! -name '*.so.*' \! -name 'openssl' \
+ \! -name '*test' \! -name '.#*' \! -name '*~' \
+ | sort > ../$(TARFILE).list
+
+tar: ../$(TARFILE).list
find . -type d -print | xargs chmod 755
find . -type f -print | xargs chmod a+r
find . -type f -perm -0100 -print | xargs chmod a+x
- find * \! -name STATUS \! -name TABLE | sort > ../$(TARFILE).list; \
- $(TAR) $(TARFLAGS) --files-from ../$(TARFILE).list -cvf - | \
- tardy --user_number=0 --user_name=openssl \
- --group_number=0 --group_name=openssl \
- --prefix=openssl-$(VERSION) - |\
- gzip --best >../$(TARFILE).gz; \
- rm -f ../$(TARFILE).list; \
+ $(TAR_COMMAND) | gzip --best >../$(TARFILE).gz
+ rm -f ../$(TARFILE).list
ls -l ../$(TARFILE).gz
-tar-snap:
- @$(TAR) $(TARFLAGS) -cvf - \
- `find * \! -name STATUS \! -name TABLE \! -name '*.o' \! -name '*.a' \! -name '*.so' \! -name '*.so.*' \! -name 'openssl' \! -name '*test' \! -name '.#*' \! -name '*~' | sort` |\
- tardy --user_number=0 --user_name=openssl \
- --group_number=0 --group_name=openssl \
- --prefix=openssl-$(VERSION) - > ../$(TARFILE);\
+tar-snap: ../$(TARFILE).list
+ $(TAR_COMMAND) > ../$(TARFILE)
+ rm -f ../$(TARFILE).list
ls -l ../$(TARFILE)
dist:
projects / openssl.git / blobdiff