# Do not edit these manually. Use Configure with --prefix or --openssldir
# to change this! Short explanation in the top comment in Configure
-INSTALLTOP={- $config{prefix} -}
-OPENSSLDIR={- $config{openssldir} -}
+INSTALLTOP={- # $prefix is used in the OPENSSLDIR perl snippet
+ #
+ our $prefix = $config{prefix} || "/usr/local";
+ $prefix -}
+OPENSSLDIR={- #
+ # The logic here is that if no --openssldir was given,
+ # OPENSSLDIR will get the value from $prefix plus "/ssl".
+ # If --openssldir was given and the value is an absolute
+ # path, OPENSSLDIR will get its value without change.
+ # If the value from --openssldir is a relative path,
+ # OPENSSLDIR will get $prefix with the --openssldir
+ # value appended as a subdirectory.
+ #
+ use File::Spec::Functions;
+ our $openssldir =
+ $config{openssldir} ?
+ (file_name_is_absolute($config{openssldir}) ?
+ $config{openssldir}
+ : catdir($prefix, $config{openssldir}))
+ : catdir($prefix, "ssl");
+ $openssldir -}
+LIBDIR={- #
+ # if $prefix/lib$target{multilib} is not an existing
+ # directory, then assume that it's not searched by linker
+ # automatically, in which case adding $target{multilib} suffix
+ # causes more grief than we're ready to tolerate, so don't...
+ our $multilib =
+ -d "$prefix/lib$target{multilib}" ? $target{multilib} : "";
+ our $libdir = $config{libdir} || "lib$multilib";
+ $libdir -}
+ENGINESDIR={- use File::Spec::Functions;
+ catdir($prefix,$libdir,"engines") -}
# NO_IDEA - Define to build without the IDEA algorithm
# NO_RC4 - Define to build without the RC4 algorithm
# NULL encryption ciphers.
#
# LOCK_DEBUG - turns on lots of lock debug output :-)
-# REF_CHECK - turn on some xyz_free() assertions.
+# REF_DEBUG - turn on some xyz_free() assertions.
# REF_PRINT - prints some stuff on structure free.
# MFUNC - Make all Malloc/Free/Realloc calls call
# CRYPTO_malloc/CRYPTO_free/CRYPTO_realloc which can be setup to
CROSS_COMPILE= {- $config{cross_compile_prefix} -}
CC= $(CROSS_COMPILE){- $target{cc} -}
-CFLAG= {- $config{cflags} -}
-DEPFLAG= {- $config{depflags} -}
-LDFLAGS= {- $config{lflags} -}
+CFLAG={- our $cflags2 = join(" ",(map { "-D".$_} @{$config{defines}}),"-DOPENSSLDIR=\"\\\"\$(OPENSSLDIR)\\\"\"","-DENGINESDIR=\"\\\"\$(ENGINESDIR)\\\"\"") -} {- $config{cflags} -}
+CFLAG_Q={- $cflags2 =~ s|([\\"])|\\$1|g; $cflags2 -} {- $config{cflags} -}
+DEPFLAG= {- join(" ",map { "-D".$_} @{$config{depdefines}}) -}
+LDFLAG= {- $config{lflags} -}
+PLIB_LDFLAG= {- $config{plib_lflags} -}
EX_LIBS= {- $config{ex_libs} -}
EXE_EXT= {- $target{exe_extension} -}
ARFLAGS= {- $target{arflags} -}
RM= rm -f
TAR= tar
TARFLAGS= --no-recursion
-LIBDIR={- $config{libdir} -}
+MAKEDEPPROG=$(CROSS_COMPILE){- $config{makedepprog} -}
# We let the C compiler driver to take care of .s files. This is done in
# order to be excused from maintaining a separate set of architecture
SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
SHARED_SSL=libssl$(SHLIB_EXT)
SHARED_LIBS={- '$(SHARED_CRYPTO) $(SHARED_SSL)' if (!$config{no_shared}) -}
-SHARED_LDFLAGS={- $target{shared_ldflag} -}
+SHARED_LDFLAG={- $target{shared_ldflag}
+ # Unlike other OSes (like Solaris, Linux, Tru64,
+ # IRIX) BSD run-time linkers (tested OpenBSD, NetBSD
+ # and FreeBSD) "demand" RPATH set on .so objects.
+ # Apparently application RPATH is not global and
+ # does not apply to .so linked with other .so.
+ # Problem manifests itself when libssl.so fails to
+ # load libcrypto.so. One can argue that we should
+ # engrave this into Makefile.shared rules or into
+ # BSD-* config lines above. Meanwhile let's try to
+ # be cautious and pass -rpath to linker only when
+ # $prefix is not /usr.
+ . ($config{target} =~ m|^BSD-| && $prefix !~ m|^/usr/.*$|
+ ? " -Wl,-rpath,\$\$(LIBRPATH)" : "") -}
+SHARED_RCFLAG={- $target{shared_rcflag} -}
GENERAL= Makefile
BASENAME= openssl
# LC_ALL=C ensures that error [and other] messages are delivered in
# same language for uniform treatment.
BUILDENV= LC_ALL=C PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)'\
- CC='$(CC)' CFLAG='$(CFLAG)' \
+ CC='$(CC)' CFLAG='$(CFLAG)' CFLAG_Q='$(CFLAG_Q)' \
AS='$(CC)' ASFLAG='$(CFLAG) -c' \
AR='$(AR)' NM='$(NM)' RANLIB='$(RANLIB)' \
CROSS_COMPILE='$(CROSS_COMPILE)' \
INSTALLTOP='$(INSTALLTOP)' OPENSSLDIR='$(OPENSSLDIR)' \
LIBDIR='$(LIBDIR)' \
DEPFLAG='$(DEPFLAG)' \
- SHARED_LDFLAGS='$(SHARED_LDFLAGS)' \
+ SHARED_LDFLAG='$(SHARED_LDFLAG)' \
+ SHARED_RCFLAG='$(SHARED_RCFLAG)' \
ZLIB_INCLUDE='$(ZLIB_INCLUDE)' LIBZLIB='$(LIBZLIB)' \
EXE_EXT='$(EXE_EXT)' SHARED_LIBS='$(SHARED_LIBS)' \
SHLIB_EXT='$(SHLIB_EXT)' SHLIB_TARGET='$(SHLIB_TARGET)' \
- LDFLAGS='$(LDFLAGS)' EX_LIBS='$(EX_LIBS)' \
+ LDFLAG='$(LDFLAG)' \
+ PLIB_LDFLAG='$(PLIB_LDFLAG)' EX_LIBS='$(EX_LIBS)' \
CPUID_OBJ='$(CPUID_OBJ)' BN_ASM='$(BN_ASM)' \
EC_ASM='$(EC_ASM)' DES_ENC='$(DES_ENC)' \
AES_ENC='$(AES_ENC)' CMLL_ENC='$(CMLL_ENC)' \
LIBDEPS="$$libs $(EX_LIBS)" \
link_a.$(SHLIB_TARGET); \
libs="-l$$i $$libs"; \
+ case "$(PLATFORM)" in \
+ Cygwin*) \
+ rm -f apps/cyg$$i-$(SHLIB_MAJOR).$(SHLIB_MINOR).dll; \
+ rm -f test/cyg$$i-$(SHLIB_MAJOR).$(SHLIB_MINOR).dll; \
+ cp cyg$$i-$(SHLIB_MAJOR).$(SHLIB_MINOR).dll apps/; \
+ cp cyg$$i-$(SHLIB_MAJOR).$(SHLIB_MINOR).dll test/; \
+ ;; \
+ mingw*) \
+ case $$i in \
+ crypto) i=libeay32;; \
+ ssl) i=ssleay32;; \
+ esac; \
+ rm -f apps/$$i.dll; \
+ rm -f test/$$i.dll; \
+ cp $$i.dll apps/; \
+ cp $$i.dll test/; \
+ esac; \
done
libcrypto.pc: Makefile
touch rehash.time; \
else :; fi
-test: tests
+test: files tests
tests: rehash
rm -f $(TARFILE).list
ls -l $(TARFILE)
-dist:
+dist:
$(PERL) Configure dist
@$(MAKE) SDIRS='$(SDIRS)' clean
@$(MAKE) TAR='$(TAR)' TARFLAGS='$(TARFLAGS)' $(DISTTARVARS) tar
projects / openssl.git / blobdiff