#! /usr/bin/env perl
# -*- mode: perl; -*-
-# Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
+# Copyright 2016-2017 The OpenSSL Project Authors. All Rights Reserved.
#
# Licensed under the OpenSSL license (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
# zlib-dynamic Like "zlib", but the zlib library is expected to be a shared
# library and will be loaded in run-time by the OpenSSL library.
# sctp include SCTP support
-# 386 generate 80386 code
# enable-weak-ssl-ciphers
# Enable weak ciphers that are disabled by default. This currently
# only includes RC4 based ciphers.
-# no-sse2 disables IA-32 SSE2 code, above option implies no-sse2
+# 386 generate 80386 code in assembly modules
+# no-sse2 disables IA-32 SSE2 code in assembly modules, the above
+# mentioned '386' option implies this one
# no-<cipher> build without specified algorithm (rsa, idea, rc5, ...)
# -<xxx> +<xxx> compiler options are passed through
# -static while -static is also a pass-through compiler option (and
# past these.
# DEBUG_UNUSED enables __owur (warn unused result) checks.
+# -DPEDANTIC complements -pedantic and is meant to mask code that
+# is not strictly standard-compliant and/or implementation-specific,
+# e.g. inline assembly, disregards to alignment requirements, such
+# that -pedantic would complain about. Incidentally -DPEDANTIC has
+# to be used even in sanitized builds, because sanitizer too is
+# supposed to and does take notice of non-standard behaviour. Then
+# -pedantic with pre-C9x compiler would also complain about 'long
+# long' not being supported. As 64-bit algorithms are common now,
+# it grew impossible to resolve this without sizeable additional
+# code, so we just tell compiler to be pedantic about everything
+# but 'long long' type.
+
my $gcc_devteam_warn = "-DDEBUG_UNUSED"
- # -DPEDANTIC complements -pedantic and is meant to mask code that
- # is not strictly standard-compliant and/or implementation-specific,
- # e.g. inline assembly, disregards to alignment requirements, such
- # that -pedantic would complain about. Incidentally -DPEDANTIC has
- # to be used even in sanitized builds, because sanitizer too is
- # supposed to and does take notice of non-standard behaviour. Then
- # -pedantic with pre-C9x compiler would also complain about 'long
- # long' not being supported. As 64-bit algorithms are common now,
- # it grew impossible to resolve this without sizeable additional
- # code, so we just tell compiler to be pedantic about everything
- # but 'long long' type.
. " -Wswitch"
. " -DPEDANTIC -pedantic -Wno-long-long"
. " -Wall"
# TODO(openssl-team): fix problems and investigate if (at least) the
# following warnings can also be enabled:
# -Wcast-align
-# -Wunreachable-code
+# -Wunreachable-code -- no, too ugly/compiler-specific
# -Wlanguage-extension-token -- no, we use asm()
# -Wunused-macros -- no, too tricky for BN and _XOPEN_SOURCE etc
# -Wextended-offsetof -- no, needed in CMS ASN1 code
. " -Wextra"
. " -Wswitch -Wswitch-default"
. " -Wno-unused-parameter"
+ . " -Wno-parentheses-equality"
. " -Wno-missing-field-initializers"
. " -Wno-language-extension-token"
. " -Wno-extended-offsetof"
# crypto/ subdirectories to build
$config{sdirs} = [
"objects",
- "md2", "md4", "md5", "sha", "mdc2", "hmac", "ripemd", "whrlpool", "poly1305", "blake2",
- "des", "aes", "rc2", "rc4", "rc5", "idea", "bf", "cast", "camellia", "seed", "chacha", "modes",
+ "md2", "md4", "md5", "sha", "mdc2", "hmac", "ripemd", "whrlpool", "poly1305", "blake2", "siphash",
+ "des", "aes", "rc2", "rc4", "rc5", "idea", "aria", "bf", "cast", "camellia", "seed", "chacha", "modes",
"bn", "ec", "rsa", "dsa", "dh", "dso", "engine",
"buffer", "bio", "stack", "lhash", "rand", "err",
"evp", "asn1", "pem", "x509", "x509v3", "conf", "txt_db", "pkcs7", "pkcs12", "comp", "ocsp", "ui",
"cms", "ts", "srp", "cmac", "ct", "async", "kdf"
];
+# test/ subdirectories to build
+$config{tdirs} = [ "ossl_shim" ];
# Known TLS and DTLS protocols
-my @tls = qw(ssl3 tls1 tls1_1 tls1_2);
+my @tls = qw(ssl3 tls1 tls1_1 tls1_2 tls1_3);
my @dtls = qw(dtls1 dtls1_2);
# Explicitly known options that are possible to disable. They can
my @disablables = (
"afalgeng",
+ "aria",
"asan",
"asm",
"async",
"egd",
"engine",
"err",
+ "external-tests",
"filenames",
"fuzz-libfuzzer",
"fuzz-afl",
"sctp",
"seed",
"shared",
+ "siphash",
"sock",
"srp",
"srtp",
"ssl-trace",
"static-engine",
"stdio",
+ "tests",
"threads",
"tls",
"ts",
# All of the following is disabled by default (RC5 was enabled before 0.9.8):
our %disabled = ( # "what" => "comment"
+ "aria" => "default",
"asan" => "default",
"crypto-mdebug" => "default",
"crypto-mdebug-backtrace" => "default",
"ec_nistp_64_gcc_128" => "default",
"egd" => "default",
+ "external-tests" => "default",
"fuzz-libfuzzer" => "default",
"fuzz-afl" => "default",
"heartbeats" => "default",
"ssl3" => "default",
"ssl3-method" => "default",
"ubsan" => "default",
+ #TODO(TLS1.3): Temporarily disabled while this is a WIP
+ "tls1_3" => "default",
"unit-test" => "default",
"weak-ssl-ciphers" => "default",
"zlib" => "default",
"dgram" => [ "dtls", "sctp" ],
"sock" => [ "dgram" ],
"dtls" => [ @dtls ],
+ sub { 0 == scalar grep { !$disabled{$_} } @dtls }
+ => [ "dtls" ],
# SSL 3.0, (D)TLS 1.0 and TLS 1.1 require MD5 and SHA
"md5" => [ "ssl", "tls1", "tls1_1", "dtls1" ],
sub { $disabled{rsa}
&& ($disabled{dsa} || $disabled{dh})
&& ($disabled{ecdsa} || $disabled{ecdh}); }
- => [ "tls1", "tls1_1", "tls1_2",
+ => [ "tls1", "tls1_1", "tls1_2", "tls1_3",
"dtls1", "dtls1_2" ],
"tls" => [ @tls ],
+ sub { 0 == scalar grep { !$disabled{$_} } @tls }
+ => [ "tls" ],
# SRP and HEARTBEATS require TLSEXT
"tlsext" => [ "srp", "heartbeats" ],
"stdio" => [ "apps", "capieng" ],
"apps" => [ "tests" ],
- "comp" => [ "zlib" ],
+ "comp" => [ "zlib" ],
+ "ec" => [ "tls1_3" ],
sub { !$disabled{"unit-test"} } => [ "heartbeats" ],
sub { !$disabled{"msan"} } => [ "asm" ],
$config{dynamic_engines} = 1;
}
-unless ($disabled{"fuzz-libfuzzer"}) {
- $config{cflags} .= "-fsanitize-coverage=edge,indirect-calls ";
-}
-
unless ($disabled{asan}) {
$config{cflags} .= "-fsanitize=address ";
}
if ($target{ec_asm_src} =~ /ecp_nistz256/) {
push @{$config{defines}}, "ECP_NISTZ256_ASM";
}
+ if ($target{padlock_asm_src} ne $table{DEFAULTS}->{padlock_asm_src}) {
+ push @{$config{defines}}, "PADLOCK_ASM";
+ }
if ($target{poly1305_asm_src} ne "") {
push @{$config{defines}}, "POLY1305_ASM";
}
}
}
-if ($user_cflags ne "") { $config{cflags}="$config{cflags}$user_cflags"; }
+if ($user_cflags ne "") { $config{cflags}="$config{cflags}$user_cflags"; $config{cxxflags}="$config{cxxflags}$user_cflags";}
else { $no_user_cflags=1; }
if (@user_defines) { $config{defines}=[ @{$config{defines}}, @user_defines ]; }
else { $no_user_defines=1; }
push @build_infos, [ catdir("engines", $_), "build.info" ]
if (-f catfile($srcdir, "engines", $_, "build.info"));
}
+ foreach (@{$config{tdirs}}) {
+ push @build_infos, [ catdir("test", $_), "build.info" ]
+ if (-f catfile($srcdir, "test", $_, "build.info"));
+ }
$config{build_infos} = [ ];
|| $target_kind eq $target{build_file}."(".$builder_platform.")");
}
},
- qr/^(?:#.*|\s*)$/ => sub { },
+ qr/^\s*(?:#.*)?$/ => sub { },
"OTHERWISE" => sub { die "Something wrong with this line:\n$_\nat $sourced/$f" },
"BEFORE" => sub {
if ($buildinfo_debug) {
$d = cleanfile($buildd, $_, $blddir);
}
# Take note if the file to depend on is being renamed
+ # Take extra care with files ending with .a, they should
+ # be treated without that extension, and the extension
+ # should be added back after treatment.
+ $d =~ /(\.a)?$/;
+ my $e = $1 // "";
+ $d = $`;
if ($unified_info{rename}->{$d}) {
$d = $unified_info{rename}->{$d};
}
+ $d .= $e;
$unified_info{depends}->{$ddest}->{$d} = 1;
# If we depend on a header file or a perl module, let's make
# sure it can get included
projects / openssl.git / blobdiff