# see INSTALL for instructions.
-my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-hw-xxx|no-hw] [[no-]threads] [[no-]shared] [[no-]zlib|zlib-dynamic] [no-asm] [no-dso] [no-krb5] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--with-xxx[=vvv]] [--test-sanity] os/compiler[:flags]\n";
+my $usage="Usage: Configure [no-<cipher> ...] [enable-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-hw-xxx|no-hw] [[no-]threads] [[no-]shared] [[no-]zlib|zlib-dynamic] [no-asm] [no-dso] [no-krb5] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--with-xxx[=vvv]] [--test-sanity] os/compiler[:flags]\n";
# Options:
#
"debug-ben-debug", "gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -g3 -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown)::::::",
"debug-ben-strict", "gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DCONST_STRICT -O2 -Wall -Wshadow -Werror -Wpointer-arith -Wcast-qual -Wwrite-strings -pipe::(unknown)::::::",
"debug-rse","cc:-DTERMIOS -DL_ENDIAN -pipe -O -g -ggdb3 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
-"debug-bodo", "gcc:-DL_ENDIAN -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DBIO_PAIR_DEBUG -DPEDANTIC -g -m486 -pedantic -Wshadow -Wall::-D_REENTRANT:::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
+"debug-bodo", "gcc:-DL_ENDIAN -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DBIO_PAIR_DEBUG -DPEDANTIC -g -march=i486 -pedantic -Wshadow -Wall::-D_REENTRANT:::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
"debug-ulf", "gcc:-DTERMIOS -DL_ENDIAN -march=i486 -Wall -DBN_DEBUG -DBN_DEBUG_RAND -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -g -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations:::CYGWIN32:::${no_asm}:win32:cygwin-shared:::.dll",
"debug-steve", "gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG_ALL -DPEDANTIC -g -mcpu=i486 -pedantic -Wno-long-long -Wall -Werror -Wshadow -pipe::-D_REENTRANT::-rdynamic -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared",
"debug-steve-linux-pseudo64", "gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG_ALL -DOPENSSL_NO_ASM -g -mcpu=i486 -Wall -Werror -Wshadow -pipe::-D_REENTRANT::-rdynamic -ldl:SIXTY_FOUR_BIT:${no_asm}:dlfcn:linux-shared",
my $exe_ext="";
my $install_prefix="";
my $no_threads=0;
-my $no_shared=1;
-my $zlib=0;
-my $no_krb5=0;
my $threads=0;
+my $no_shared=0; # but "no-shared" is default
+my $zlib=1; # but "no-zlib" is default
+my $no_krb5=0; # but "no-krb5" is implied unless "--with-krb5-..." is used
my $no_asm=0;
my $no_dso=0;
my @skip=();
my $default_ranlib;
my $perl;
-my $no_ssl2=0;
-my $no_ssl3=0;
-my $no_tls1=0;
-my $no_md5=0;
-my $no_sha=0;
-my $no_rsa=0;
-my $no_dh=0;
+
+# All of the following is disabled by default (RC5 was enabled before 0.9.8):
+
+my %disabled = ( # "what" => "comment"
+ "rc5" => "default",
+ "shared" => "default",
+ "zlib" => "default",
+ "zlib-dynamic" => "default"
+ );
+
+# Additional "no-..." options will be collected in %disabled.
+# To remove something from %disabled, use e.g. "enable-rc5".
+# For symmetry, "disable-..." is a synonym for "no-...".
+
my $no_sse2=0;
&usage if ($#ARGV < 0);
foreach (@argvcopy)
{
s /^-no-/no-/; # some people just can't read the instructions
- if (/^--test-sanity$/)
- {
- exit(&test_sanity());
- }
- elsif (/^no-asm$/)
- {
- $no_asm=1;
- $openssl_other_defines .= "#define OPENSSL_NO_ASM\n";
- }
- elsif (/^no-err$/)
- {
- $flags .= "-DOPENSSL_NO_ERR ";
- $openssl_other_defines .= "#define OPENSSL_NO_ERR\n";
- }
- elsif (/^no-hw-(.+)$/)
- {
- my $hw=$1;
- $hw =~ tr/[a-z]/[A-Z]/;
- $openssl_other_defines .= "#define OPENSSL_NO_HW_$hw\n";
- }
- elsif (/^no-hw$/)
- {
- $openssl_other_defines .= "#define OPENSSL_NO_HW\n";
- }
- elsif (/^no-dso$/)
- { $no_dso=1; }
- elsif (/^no-krb5$/)
- { $no_krb5=1; }
- elsif (/^no-threads$/)
- { $no_threads=1; }
- elsif (/^threads$/)
- { $threads=1; }
- elsif (/^no-shared$/)
- { $no_shared=1; }
- elsif (/^shared$/ || /^-shared$/ || /^--shared$/)
- { $no_shared=0; }
- elsif (/^no-zlib$/)
- { $zlib=0; }
- elsif (/^zlib$/)
- { $zlib=1; }
- elsif (/^zlib-dynamic$/)
- { $zlib=2; }
- elsif (/^no-symlinks$/)
- { $symlink=0; }
- elsif (/^no-ssl$/)
- { $no_ssl2 = $no_ssl3 = 1; }
- elsif (/^no-ssl2$/)
- { $no_ssl2 = 1; }
- elsif (/^no-ssl3$/)
- { $no_ssl3 = 1; }
- elsif (/^no-tls1?$/)
- { $no_tls1 = 1; }
- elsif (/^no-sse2$/)
- { $no_sse2 = 1; }
- elsif (/^no-(.+)$/)
+
+ # rewrite some options in "enable-..." form
+ s /^-?-?shared$/enable-shared/;
+ s /^threads$/enable-threads/;
+ s /^zlib$/enable-zlib/;
+ s /^zlib-dynamic$/enable-zlib-dynamic/;
+
+ if (/^no-(.+)$/ || /^disable-(.+)$/)
{
- my $algo=$1;
- push @skip,$algo;
- $algo =~ tr/[a-z]/[A-Z]/;
- #$flags .= "-DOPENSSL_NO_$algo ";
- #$depflags .= "-DOPENSSL_NO_$algo ";
- $openssl_algorithm_defines .= "#define OPENSSL_NO_$algo\n";
- if ($algo eq "RIJNDAEL")
- {
- push @skip, "aes";
- #$flags .= "-DOPENSSL_NO_AES ";
- #$depflags .= "-DOPENSSL_NO_AES ";
- $openssl_algorithm_defines .= "#define OPENSSL_NO_AES\n";
- }
- if ($algo eq "DES")
- {
- push @skip, "mdc2";
- $options .= " no-mdc2";
- #$flags .= "-DOPENSSL_NO_MDC2 ";
- #$depflags .= "-DOPENSSL_NO_MDC2 ";
- $openssl_algorithm_defines .= "#define OPENSSL_NO_MDC2\n";
- }
- if ($algo eq "EC")
+ if ($1 eq "ssl")
{
- push @skip, "ecdsa";
- push @skip, "ecdh";
- $options .= " no-ecdsa";
- $options .= " no-ecdh";
- $flags .= "-DOPENSSL_NO_ECDSA ";
- $flags .= "-DOPENSSL_NO_ECDH ";
- $depflags .= "-DOPENSSL_NO_ECDSA ";
- $depflags .= "-DOPENSSL_NO_ECDH ";
- $openssl_algorithm_defines .= "#define OPENSSL_NO_ECDSA\n";
- $openssl_algorithm_defines .= "#define OPENSSL_NO_ECDH\n";
+ $disabled{"ssl2"} = "option(ssl)";
+ $disabled{"ssl3"} = "option(ssl)";
}
- if ($algo eq "SHA" || $algo eq "SHA1")
+ elsif ($1 eq "tls")
{
- push @skip, "ecdsa";
- $options .= " no-ecdsa";
- $flags .= "-DOPENSSL_NO_ECDSA ";
- $depflags .= "-DOPENSSL_NO_ECDSA ";
- $openssl_algorithm_defines .= "#define OPENSSL_NO_ECDSA\n";
+ $disabled{"tls1"} = "option(tls)"
}
- if ($algo eq "MD5")
- {
- $no_md5 = 1;
- }
- if ($algo eq "SHA")
- {
- $no_sha = 1;
- }
- if ($algo eq "RSA")
- {
- $no_rsa = 1;
- }
- if ($algo eq "DH")
+ else
{
- $no_dh = 1;
+ $disabled{$1} = "option";
}
+ }
+ elsif (/^enable-(.+)$/)
+ {
+ delete $disabled{$1};
+
+ $threads = 1 if ($1 eq "threads");
+ }
+ elsif (/^--test-sanity$/)
+ {
+ exit(&test_sanity());
}
elsif (/^reconfigure/ || /^reconf/)
{
die "Insufficient data to reconfigure, please do a normal configuration\n";
}
elsif (/^386$/)
- { $processor=386; $no_sse2=1; }
+ { $processor=386; }
elsif (/^rsaref$/)
{
# No RSAref support any more since it's not needed.
die "target already defined - $target\n" if ($target ne "");
$target=$_;
}
- unless ($_ eq $target) {
- if ($options eq "") {
- $options = $_;
- } else {
- $options .= " ".$_;
+
+ unless ($_ eq $target || /^no-/ || /^disable-/)
+ {
+ # "no-..." follows later after implied disactivations
+ # have been derived. (Don't take this too seroiusly,
+ # we really only write OPTIONS to the Makefile out of
+ # nostalgia.)
+
+ if ($options eq "")
+ { $options = $_; }
+ else
+ { $options .= " ".$_; }
}
}
}
-}
-$no_ssl3=1 if ($no_md5 || $no_sha);
-$no_ssl3=1 if ($no_rsa && $no_dh);
-$no_ssl2=1 if ($no_md5);
-$no_ssl2=1 if ($no_rsa);
-$no_tls1=1 if ($no_md5 || $no_sha);
-$no_tls1=1 if ($no_dh);
+if ($processor eq "386")
+ {
+ $disabled{"sse2"} = "forced";
+ }
+
+if (!defined($withargs{"krb5-flavor"}) || $withargs{"krb5-flavor"} eq "")
+ {
+ $disabled{"krb5"} = "krb5-flavor not specified";
+ }
+
+if (!defined($disabled{"zlib-dynamic"}))
+ {
+ # "zlib-dynamic" was specifically enabled, so enable "zlib"
+ delete $disabled{"zlib"};
+ }
-if ($no_ssl2)
+if (defined($disabled{"rijndael"}))
+ {
+ $disabled{"aes"} = "forced";
+ }
+if (defined($disabled{"des"}))
+ {
+ $disabled{"mdc2"} = "forced";
+ }
+if (defined($disabled{"ec"}))
{
- push @skip,"SSL2";
- #$flags .= "-DOPENSSL_NO_SSL2 ";
- #$depflags .= "-DOPENSSL_NO_SSL2 ";
- $openssl_algorithm_defines .= "#define OPENSSL_NO_SSL2\n";
+ $disabled{"ecdsa"} = "forced";
+ $disabled{"ecdh"} = "forced";
}
-if ($no_ssl3)
+# SSL 2.0 requires MD5 and RSA
+if (defined($disabled{"md5"}) || defined($disabled{"rsa"}))
{
- push @skip,"SSL3";
- #$flags .= "-DOPENSSL_NO_SSL3 ";
- #$depflags .= "-DOPENSSL_NO_SSL3 ";
- $openssl_algorithm_defines .= "#define OPENSSL_NO_SSL3\n";
+ $disabled{"ssl2"} = "forced";
}
-if ($no_tls1)
+# SSL 3.0 and TLS requires MD5 and SHA and either RSA or DSA+DH
+if (defined($disabled{"md5"}) || defined($disabled{"sha"})
+ || (defined($disabled{"rsa"})
+ && (defined($disabled{"dsa"}) || defined($disabled{"dh"}))))
{
- push @skip,"TLS1";
- #$flags .= "-DOPENSSL_NO_TLS1 ";
- #$depflags .= "-DOPENSSL_NO_TLS1 ";
- $openssl_algorithm_defines .= "#define OPENSSL_NO_TLS1\n";
+ $disabled{"ssl3"} = "forced";
+ $disabled{"tls1"} = "forced";
}
+
if ($target eq "TABLE") {
foreach $target (sort keys %table) {
print_table_entry($target);
&usage if (!defined($table{$target}));
+
+foreach (sort (keys %disabled))
+ {
+ $options .= " no-$_";
+
+ printf " no-%-12s %-10s", $_, "[$disabled{$_}]";
+
+ if (/^dso$/)
+ { $no_dso = 1; }
+ elsif (/^threads$/)
+ { $no_threads = 1; }
+ elsif (/^shared$/)
+ { $no_shared = 1; }
+ elsif (/^zlib$/)
+ { $zlib = 0; }
+ elsif (/^zlib-dynamic$/)
+ { }
+ elsif (/^symlinks$/)
+ { $symlink = 0; }
+ elsif (/^sse2$/)
+ { $no_sse2 = 1; }
+ else
+ {
+ my ($ALGO, $algo);
+ ($ALGO = $algo = $_) =~ tr/[a-z]/[A-Z]/;
+
+ if (/^asm$/ || /^err$/ || /^hw$/ || /^hw-/)
+ {
+ $openssl_other_defines .= "#define OPENSSL_NO_$ALGO\n";
+ print " OPENSSL_NO_$ALGO";
+
+ if (/^err$/)
+ { $flags .= "-DOPENSSL_NO_ERR "; }
+ }
+ else
+ {
+ $openssl_algorithm_defines .= "#define OPENSSL_NO_$ALGO\n";
+ print " OPENSSL_NO_$ALGO";
+
+ if (/^krb5$/)
+ { $no_krb5 = 1; }
+ else
+ {
+ push @skip, $algo;
+ print " (skip dir)";
+ }
+ }
+ }
+
+ print "\n";
+ }
+
+
my $IsMK1MF=scalar grep /^$target$/,@MK1MF_Builds;
$IsMK1MF=1 if ($target eq "mingw" && $^O ne "cygwin");
# Kerberos settings. The flavor must be provided from outside, either through
# the script "config" or manually.
-if ($no_krb5
- || !defined($withargs{"krb5-flavor"})
- || $withargs{"krb5-flavor"} eq "")
- {
- #$cflags="-DOPENSSL_NO_KRB5 $cflags";
- $options.=" no-krb5" unless $no_krb5;
- $openssl_algorithm_defines .= "#define OPENSSL_NO_KRB5\n";
- }
-else
+if (!$no_krb5)
{
my ($lresolv, $lpath, $lext);
if ($withargs{"krb5-flavor"} =~ /^[Hh]eimdal$/)
if ($zlib)
{
$cflags = "-DZLIB $cflags";
- $cflags = "-DZLIB_SHARED $cflags" if $zlib == 2;
- $lflags = "$lflags -lz" if $zlib == 1;
+ if (defined($disabled{"zlib-dynamic"}))
+ {
+ $lflags = "$lflags -lz";
+ }
+ else
+ {
+ $cflags = "-DZLIB_SHARED $cflags";
+ }
}
# You will find shlib_mark1 and shlib_mark2 explained in Makefile.org
#$bn1=$bn_asm unless ($bn1 =~ /\.o$/);
#$bn_obj="$bn1";
-$cpuid_obj="" if ($processor==386);
+$cpuid_obj="" if ($processor eq "386");
$bn_obj = $bn_asm unless $bn_obj ne "";
# bn86* is the only one implementing bn_*_part_words
elsif (/^#((define)|(undef))\s+RC4_INDEX/)
{ printf OUT "#%s RC4_INDEX\n",($rc4_idx)?"define":"undef"; }
elsif (/^#(define|undef)\s+I386_ONLY/)
- { printf OUT "#%s I386_ONLY\n", ($processor == 386)?
+ { printf OUT "#%s I386_ONLY\n", ($processor eq "386")?
"define":"undef"; }
elsif (/^#define\s+MD2_INT\s/)
{ printf OUT "#define MD2_INT unsigned %s\n",$type[$md2_int]; }
projects / openssl.git / blobdiff