"debug-ben-debug", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -g3 -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown):::::",
"debug-ben-strict", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -DCONST_STRICT -O2 -Wall -Wshadow -Werror -Wpointer-arith -Wcast-qual -Wwrite-strings -pipe::(unknown):::::",
"debug-rse","cc:-DTERMIOS -DL_ENDIAN -pipe -O -g -ggdb3 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
-"debug-bodo", "gcc:-DL_ENDIAN -DREF_CHECK -DCRYPTO_MDEBUG -g -m486 -Wall::-D_REENTRANT::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
+"debug-bodo", "gcc:-DBIO_PAIR_DEBUG -DL_ENDIAN -DREF_CHECK -DCRYPTO_MDEBUG_ALL -g -m486 -Wall::-D_REENTRANT::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
"dist", "cc:-O::(unknown):::::",
# Basic configs that should work on any box
"gcc", "gcc:-O3::(unknown)::BN_LLONG:::",
"cc", "cc:-O::(unknown):::::",
-# Solaris setups
+#### Solaris x86 setups
"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_sol_asm",
-"solaris-sparc-gcc","gcc:-O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8.o::",
-"solaris-usparc-gcc","gcc:-O3 -fomit-frame-pointer -mcpu=ultrasparc -Wall -DB_ENDIAN -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus-gcc.o:::asm/md5-sparcv8plus.o:",
-"solaris-usparc-oldgcc","gcc:-O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus-gcc.o:::asm/md5-sparcv8plus.o:",
-"debug-solaris-sparc-gcc","gcc:-DREF_CHECK -DCRYPTO_MDEBUG -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:::",
-"debug-solaris-usparc-gcc","gcc:-DREF_CHECK -DCRYPTO_MDEBUG -O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus-gcc.o::",
+#### SPARC Solaris with GNU C setups
+"solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:::",
+"solaris-sparcv8-gcc","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8.o::",
+"solaris-sparcv9-gcc","gcc:-mcpu=ultrasparc -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:",
+# gcc pre-2.8 doesn't understand -mcpu=ultrasparc, so fall down to -mv8
+# but keep the assembler modules.
+"solaris-sparcv9-gcc27","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus-gcc27.o:::asm/md5-sparcv8plus-gcc27.o:",
+####
+"debug-solaris-sparcv8-gcc","gcc:-DREF_CHECK -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:::",
+"debug-solaris-sparcv9-gcc","gcc:-DREF_CHECK -DCRYPTO_MDEBUG_ALL -O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus.o::",
+
+#### SPARC Solaris with Sun C setups
# DO NOT use /xO[34] on sparc with SC3.0. It is broken, and will not pass the tests
"solaris-sparc-sc3","cc:-fast -O -Xa -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_UNROLL BF_PTR:::",
-# SC4 is ok, better than gcc even on bn as long as you tell it -xarch=v8
-# -fast slows things like DES down quite a lot
+# SC4.0 doesn't pass 'make test', upgrade to SC5.0 or SC4.2.
+# SC4.2 is ok, better than gcc even on bn as long as you tell it -xarch=v8
# SC5.0 note: Compiler common patch 107357-01 or later is required!
-"solaris-sparc-cc","cc:-xarch=v8 -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o::",
-"solaris-usparc-cc","cc:-xtarget=ultra -xarch=v8plus -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DULTRASPARC -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:",
-"solaris64-usparc-cc","cc:-xtarget=ultra -xarch=v9 -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:SIXTY_FOUR_BIT_LONG RC4_CHAR DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:",
+"solaris-sparcv7-cc","cc:-xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:::",
+"solaris-sparcv8-cc","cc:-xarch=v8 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o::",
+"solaris-sparcv9-cc","cc:-xtarget=ultra -xarch=v8plus -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:",
+"solaris64-sparcv9-cc","cc:-xtarget=ultra -xarch=v9 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:SIXTY_FOUR_BIT_LONG RC4_CHAR DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:",
+
+#### SPARC Linux setups
+"linux-sparcv7","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::BN_LLONG RC4_CHAR DES_UNROLL BF_PTR::",
+# Ray Miller <ray.miller@computing-services.oxford.ac.uk> has patiently
+# assisted with debugging of following two configs.
+"linux-sparcv8","gcc:-mv8 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DBN_DIV2W::-D_REENTRANT::BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8.o::::",
+# it's a real mess with -mcpu=ultrasparc option under Linux, but
+# -Wa,-Av8plus should do the trick no matter what.
+"linux-sparcv9","gcc:-mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -Wa,-Av8plus -DULTRASPARC -DBN_DIV2W::-D_REENTRANT::BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:",
+# !!!Folowing can't be even tested yet!!!
+# We have to wait till 64-bit glibc for SPARC is operational!!!
+#"linux64-sparcv9","sparc64-linux-gcc:-m64 -mcpu=v9 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DULTRASPARC -DBN_DIV2W::-D_REENTRANT::BN_LLONG RC4_CHAR DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:",
# Sunos configs, assuming sparc for the gcc one.
##"sunos-cc", "cc:-O4 -DNOPROTO -DNOCONST::(unknown)::DES_UNROLL:::",
"sunos-gcc","gcc:-O3 -mv8::(unknown)::BN_LLONG RC4_CHAR DES_UNROLL DES_PTR DES_RISC1:::",
-# SGI configurations. If the box is rather old (r3000 cpu), you will
-# probably have to remove the '-mips2' flag. I've only been using
-# IRIX 5.[23].
-# I've recently done 32 and 64 bit mips assember, it make this RSA
-# 3 times faster, use if at all possible.
-#"irix-gcc","gcc:-O2 -mips2::SIXTY_FOUR_BIT BN_LLONG RC4_INDEX RC4_CHAR:::",
-"irix-gcc","gcc:-O2 -DTERMIOS -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR:::",
+#### IRIX 5.x configs
+# -mips2 flag is added by ./config when appropriate.
+"irix-gcc","gcc:-O3 -DTERMIOS -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR:::",
"irix-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown)::BN_LLONG DES_PTR DES_RISC2 DES_UNROLL BF_PTR:::",
-"irix-mips3-gcc","gcc:-mips3 -O2 -DTERMIOS -DB_ENDIAN::(unknown)::MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:::",
-"irix-mips3-cc", "cc:-n32 -mips3 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown)::DES_PTR DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:::",
-"debug-irix-cc", "cc:-w2 -g -DCRYPTO_MDEBUG -DTERMIOS -DB_ENDIAN::(unknown):::::",
-# This is the n64 mode build.
-"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown)::DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:::",
+#### IRIX 6.x configs
+# Only N32 and N64 ABIs are supported. If you need O32 ABI build, invoke
+# './Configure irix-[g]cc' manually.
+# -mips4 flag is added by ./config when appropriate.
+"irix-mips3-gcc","gcc:-mabi=n32 -mmips-as -O3 -DTERMIOS -DB_ENDIAN::(unknown)::MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::",
+"irix-mips3-cc", "cc:-n32 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown)::DES_PTR DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::",
+# N64 ABI builds.
+"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -mmips-as -O3 -DTERMIOS -DB_ENDIAN::(unknown)::DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:asm/mips3.o::",
+"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown)::DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:asm/mips3.o::",
# HPUX 9.X config.
# Don't use the bundled cc. It is broken. Use HP ANSI C if possible, or
# If hpux-cc fails (e.g. during "make test"), try the next one; otherwise,
# please report your OS and compiler version to the bugs@openssl.org
# mailing list.
-"hpux-brokencc", "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O4 -z::(unknown)::DES_PTR DES_UNROLL DES_RISC1:::",
+"hpux-brokencc", "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O2 -z::(unknown)::DES_PTR DES_UNROLL DES_RISC1:::",
"hpux-gcc", "gcc:-DB_ENDIAN -DBN_DIV2W -O3::(unknown)::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",
# If hpux-gcc fails, try this one:
# HPUX 10.X config. Supports threads.
"hpux10-cc", "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O4 -z::-D_REENTRANT::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",
-# If hpux10-cc fails, try this one:
-"hpux10-brokencc", "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O4 -z::-D_REENTRANT::DES_PTR DES_UNROLL DES_RISC1:::",
+# If hpux10-cc fails, try this one (if still fails, try deleting BN_LLONG):
+"hpux10-brokencc", "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O2 -z::-D_REENTRANT::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",
"hpux10-gcc", "gcc:-DB_ENDIAN -DBN_DIV2W -O3::-D_REENTRANT::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",
# If hpux10-gcc fails, try this one:
"linux-aout", "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_out_asm",
"linux-mips", "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown)::BN_LLONG:::",
"linux-ppc", "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown)::::",
-"linux-sparc","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::BN_LLONG RC4_CHAR DES_UNROLL BF_PTR::",
-"linux-sparc64","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -mv8 -Wall::-D_REENTRANT:::::",
"NetBSD-sparc", "gcc:-DTERMIOS -O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL:::",
"NetBSD-m68", "gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL:::",
"NetBSD-x86", "gcc:-DTERMIOS -O3 -fomit-frame-pointer -m486 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:",
"BC-16","bcc:::(unknown)::BN_LLONG DES_PTR RC4_INDEX SIXTEEN_BIT:::",
# CygWin32
+# (Note: the real CFLAGS for Windows builds are defined by util/mk1mf.pl
+# and its library files in util/pl/*)
"CygWin32", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::::BN_LLONG $x86_gcc_des $x86_gcc_opts:",
"Mingw32", "gcc:-DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::::BN_LLONG $x86_gcc_des $x86_gcc_opts:",
$algo =~ tr/[a-z]/[A-Z]/;
$flags .= "-DNO_$algo ";
$depflags .= "-DNO_$algo ";
+ if ($algo eq "DES")
+ {
+ $options .= " no-mdc2";
+ $flags .= "-DNO_MDC2 ";
+ $depflags .= "-DNO_MDC2 ";
+ }
}
elsif (/^386$/)
{ $processor=386; }
die "target already defined - $target\n" if ($target ne "");
$target=$_;
}
- $options .= $_ unless $_ eq $target;
+ unless ($_ eq $target) {
+ if ($options eq "") {
+ $options = $_;
+ } else {
+ $options .= " ".$_;
+ }
+ }
}
if ($target eq "TABLE") {
{
chop;
$sdirs = 1 if /^SDIRS=/;
- $sdirs = 0 unless /\\$/;
if ($sdirs) {
my $dir;
foreach $dir (@skip) {
s/$dir//;
}
}
+ $sdirs = 0 unless /\\$/;
s/^VERSION=.*/VERSION=$version/;
s/^MAJOR=.*/MAJOR=$major/;
s/^MINOR=.*/MINOR=$minor/;
print "BF_PTR2 used\n" if $bf_ptr == 2;
if($IsWindows) {
- open (OUT,">crypto/date.h") || die "Can't open date.h";
- printf OUT "#define DATE \"%s\"\n", scalar gmtime();
+ open (OUT,">crypto/buildinf.h") || die "Can't open buildinf.h";
+ printf OUT <<EOF;
+#ifndef MK1MF_BUILD
+ /* auto-generated by Configure for crypto/cversion.c:
+ * for Unix builds, crypto/Makefile.ssl generates functional definitions;
+ * Windows builds (and other mk1mf builds) compile cversion.c with
+ * -DMK1MF_BUILD and use definitions added to this file by util/mk1mf.pl. */
+ #error "Windows builds (PLATFORM=$target) use mk1mf.pl-created Makefiles"
+#endif
+EOF
close(OUT);
- system "perl crypto/objects/obj_dat.pl <crypto/objects/objects.h >crypto/objects/obj_dat.h";
+
+ system "perl crypto/objects/obj_dat.pl <crypto\\objects\\objects.h >crypto\\objects\\obj_dat.h";
} else {
(system "make -f Makefile.ssl PERL=\'$perl\' links") == 0 or exit $?;
### (system 'make depend') == 0 or exit $? if $depflags ne "";
projects / openssl.git / blobdiff