"debug-ben-strict", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -DCONST_STRICT -O2 -Wall -Wshadow -Werror -Wpointer-arith -Wcast-qual -Wwrite-strings -pipe::(unknown):::::",
"debug-rse","cc:-DTERMIOS -DL_ENDIAN -pipe -O -g -ggdb3 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
"debug-bodo", "gcc:-DBIO_PAIR_DEBUG -DL_ENDIAN -DREF_CHECK -DCRYPTO_MDEBUG_ALL -g -m486 -Wall::-D_REENTRANT::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
+"debug-ulf", "gcc:-DL_ENDIAN -DREF_CHECK -DCRYPTO_MDEBUG_ALL -DPEDANTIC -g -O2 -m486 -Wall -pedantic -Wall -Wshadow -pipe::-D_REENTRANT::$x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
"dist", "cc:-O::(unknown):::::",
# Basic configs that should work on any box
# but keep the assembler modules.
"solaris-sparcv9-gcc27","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus-gcc27.o:::asm/md5-sparcv8plus-gcc27.o:",
####
-"debug-solaris-sparcv8-gcc","gcc:-DREF_CHECK -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:::",
+"debug-solaris-sparcv8-gcc","gcc:-DREF_CHECK -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8.o::",
"debug-solaris-sparcv9-gcc","gcc:-DREF_CHECK -DCRYPTO_MDEBUG_ALL -O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus.o::",
#### SPARC Solaris with Sun C setups
"solaris-sparcv8-cc","cc:-xarch=v8 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o::",
"solaris-sparcv9-cc","cc:-xtarget=ultra -xarch=v8plus -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:",
"solaris64-sparcv9-cc","cc:-xtarget=ultra -xarch=v9 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:SIXTY_FOUR_BIT_LONG RC4_CHAR DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:",
+####
+"debug-solaris-sparcv8-cc","cc:-DREF_CHECK -DCRYPTO_MDEBUG_ALL -xarch=v8 -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o::",
+"debug-solaris-sparcv9-cc","cc:-DREF_CHECK -DCRYPTO_MDEBUG_ALL -xtarget=ultra -xarch=v8plus -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:",
#### SPARC Linux setups
"linux-sparcv7","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::BN_LLONG RC4_CHAR DES_UNROLL BF_PTR::",
# Only N32 and N64 ABIs are supported. If you need O32 ABI build, invoke
# './Configure irix-[g]cc' manually.
# -mips4 flag is added by ./config when appropriate.
-"irix-mips3-gcc","gcc:-mabi=n32 -mmips-as -O3 -DTERMIOS -DB_ENDIAN::(unknown)::MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::",
-"irix-mips3-cc", "cc:-n32 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown)::DES_PTR DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::",
+"irix-mips3-gcc","gcc:-mabi=n32 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::(unknown)::MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::",
+"irix-mips3-cc", "cc:-n32 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::(unknown)::DES_PTR DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::",
# N64 ABI builds.
-"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -mmips-as -O3 -DTERMIOS -DB_ENDIAN::(unknown)::DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:asm/mips3.o::",
-"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown)::DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:asm/mips3.o::",
+"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::(unknown)::DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:asm/mips3.o::",
+"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::(unknown)::DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:asm/mips3.o::",
# HPUX 9.X config.
# Don't use the bundled cc. It is broken. Use HP ANSI C if possible, or
"hpux-cc", "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O4 -z::(unknown)::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",
# If hpux-cc fails (e.g. during "make test"), try the next one; otherwise,
-# please report your OS and compiler version to the bugs@openssl.org
+# please report your OS and compiler version to the openssl-bugs@openssl.org
# mailing list.
"hpux-brokencc", "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O2 -z::(unknown)::DES_PTR DES_UNROLL DES_RISC1:::",
my $perl;
$ranlib=&which("ranlib") or $ranlib="true";
-$perl=&which("perl5") or $perl=&which("perl") or $perl="perl";
+$perl=$ENV{'PERL'} or $perl=&which("perl5") or $perl=&which("perl")
+ or $perl="perl";
&usage if ($#ARGV < 0);
}
}
-# my $pwd;
-#
-# if($IsWindows) {
-# $pwd="(current directory)";
-# } else {
-# $pwd =`pwd`;
-# chop($pwd);
-# }
-# print <<EOF;
-#
-# NOTE: The OpenSSL header files have been moved from include/*.h
-# to include/openssl/*.h. To include OpenSSL header files, now
-# directives of the form
-# #include <openssl/foo.h>
-# should be used instead of #include <foo.h>.
-# These new file locations allow installing the OpenSSL header
-# files in /usr/local/include/openssl/ and should help avoid
-# conflicts with other libraries.
-#
-# To compile programs that use the old form <foo.h>,
-# usually an additional compiler option will suffice: E.g., add
-# -I$prefix/include/openssl
-# or
-# -I$pwd/include/openssl
-# to the CFLAGS in the Makefile of the program that you want to compile
-# (and leave all the original -I...'s in place!).
-#
-# Please make sure that no old OpenSSL header files are around:
-# The include directory should now be empty except for the openssl
-# subdirectory.
-#
-# EOF
+print <<EOF;
+
+NOTE: OpenSSL header files were moved from <*.h> to <openssl/*.h>;
+see file INSTALL for hints on coping with compatibility problems.
+EOF
print <<\EOF if (!$no_threads && !$threads);
The library could not be configured for supporting multi-threaded
applications as the compiler options required on this system are not known.
See file INSTALL for details if you need multi-threading.
-
EOF
exit(0);
projects / openssl.git / blobdiff