Comment adjusted to reality.

[openssl.git] / Configure

diff --git a/Configure b/Configure
index 7603301938d513fa2d26a3fa067ba0f99db29da4..4ea56fefaec2c66db2d829b03757d22522c28593 100755 (executable)
--- a/Configure
+++ b/Configure
@@ -116,6 +116,7 @@ my %table=(
 "solaris-sparc-sc3","cc:-fast -O -Xa -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_UNROLL BF_PTR:::",
 # SC4 is ok, better than gcc even on bn as long as you tell it -xarch=v8
 # -fast slows things like DES down quite a lot
+# SC5.0 note: Compiler common patch 107357-01 or later is required!
 "solaris-sparc-cc","cc:-xarch=v8 -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o::",
 "solaris-usparc-cc","cc:-xtarget=ultra -xarch=v8plus -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DULTRASPARC -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:",
 "solaris64-usparc-cc","cc:-xtarget=ultra -xarch=v9 -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:SIXTY_FOUR_BIT_LONG RC4_CHAR DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:",
@@ -141,11 +142,26 @@ my %table=(
 # HPUX 9.X config.
 # Don't use the bundled cc.  It is broken.  Use HP ANSI C if possible, or
 # egcs.  gcc 2.8.1 is also broken.
+
 "hpux-cc",     "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O4 -z::(unknown)::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",
+# If hpux-cc fails (e.g. during "make test"), try the next one; otherwise,
+# please report your OS and compiler version to the bugs@openssl.org
+# mailing list.
+"hpux-brokencc",       "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O4 -z::(unknown)::DES_PTR DES_UNROLL DES_RISC1:::",
+
 "hpux-gcc",    "gcc:-DB_ENDIAN -DBN_DIV2W -O3::(unknown)::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",
+# If hpux-gcc fails, try this one:
+"hpux-brokengcc",      "gcc:-DB_ENDIAN -DBN_DIV2W -O3::(unknown)::DES_PTR DES_UNROLL DES_RISC1:::",
+
 # HPUX 10.X config.  Supports threads.
 "hpux10-cc",   "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O4 -z::-D_REENTRANT::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",
+# If hpux10-cc fails, try this one:
+"hpux10-brokencc",     "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O4 -z::-D_REENTRANT::DES_PTR DES_UNROLL DES_RISC1:::",
+
 "hpux10-gcc",  "gcc:-DB_ENDIAN -DBN_DIV2W -O3::-D_REENTRANT::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",
+# If hpux10-gcc fails, try this one:
+"hpux10-brokengcc",    "gcc:-DB_ENDIAN -DBN_DIV2W -O3::-D_REENTRANT::DES_PTR DES_UNROLL DES_RISC1:::",
+
 # HPUX 11.X from www.globus.org.
 # Only works on PA-RISC 2.0 cpus, and not optimized.  Why?
 "hpux11-32bit-cc","cc:+DA2.0 -DB_ENDIAN -D_HPUX_SOURCE -Aa -Ae +ESlit::-D_REENTRANT::DES_PTR DES_UNROLL DES_RISC1:::",
@@ -176,15 +192,14 @@ my %table=(
 "linux-sparc64","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -mv8 -Wall::-D_REENTRANT:::::",
 "NetBSD-sparc",        "gcc:-DTERMIOS -O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL:::",
 "NetBSD-m68",  "gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL:::",
-"NetBSD-x86",  "gcc:-DTERMIOS -D_ANSI_SOURCE -O3 -fomit-frame-pointer -m486 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:",
+"NetBSD-x86",  "gcc:-DTERMIOS -O3 -fomit-frame-pointer -m486 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:",
 #"FreeBSD",   "gcc:-DTERMIOS -DL_ENDIAN -D_ANSI_SOURCE -fomit-frame-pointer -O3 -m486 -Wall:(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_out_asm",
 "FreeBSD",      "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_out_asm",
 "FreeBSD-elf",  "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
 "bsdi-gcc",     "gcc:-O3 -ffast-math -DL_ENDIAN -DPERL5 -m486::(unknown)::RSA_LLONG $x86_gcc_des $x86_gcc_opts:$x86_bsdi_asm",
 "bsdi-elf-gcc",     "gcc:-DPERL5 -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
-# Mark Crispin advises against using -O3 on NeXTstep ...
-# "nextstep",  "cc:-O3 -Wall::(unknown)::BN_LLONG $x86_gcc_des ${x86_gcc_opts}:::",
 "nextstep",    "cc:-O -Wall:<libc.h>:(unknown)::BN_LLONG $x86_gcc_des ${x86_gcc_opts}:::",
+"nextstep3.3", "cc:-O3 -Wall:<libc.h>:(unknown)::BN_LLONG $x86_gcc_des ${x86_gcc_opts}:::",
 # NCR MP-RAS UNIX ver 02.03.01
 "ncr-scde","cc:-O6 -Xa -Hoff=BEHAVED -686 -Hwide -Hiw::(unknown):-lsocket -lnsl:$x86_gcc_des ${x86_gcc_opts}:::",
 
@@ -752,7 +767,7 @@ sub which
        my $path;
        foreach $path (split /:/, $ENV{PATH})
                {
-               if (-x "$path/$name")
+               if (-f "$path/$name" and -x _)
                        {
                        return "$path/$name" unless ($name eq "perl" and
                         system("$path/$name -e " . '\'exit($]<5.0);\''));