##
## Configure -- OpenSSL source tree configuration script
## If editing this file, run this command before committing
-## make -f Makefile.org TABLE
+## make -f Makefile.in TABLE
##
require 5.000;
#
# --cross-compile-prefix Add specified prefix to binutils components.
#
+# --api One of 0.9.8, 1.0.0 or 1.1.0. Do not compile support for
+# interfaces deprecated as of the specified OpenSSL version.
+#
# no-hw-xxx do not compile support for specific crypto hardware.
# Generic OpenSSL-style methods relating to this support
# are always compiled but return NULL if the hardware
# Minimum warning options... any contributions to OpenSSL should at least get
# past these.
-my $gcc_devteam_warn = "-Wall -pedantic -DPEDANTIC -Wno-long-long -Wsign-compare -Wmissing-prototypes -Wshadow -Wformat -Wtype-limits -Werror -DCRYPTO_MDEBUG_ALL -DCRYPTO_MDEBUG_ABORT -DREF_CHECK -DDEBUG_UNUSED";
+my $gcc_devteam_warn = "-Wall -pedantic -DPEDANTIC -Wno-long-long -Wsign-compare -Wmissing-prototypes -Wshadow -Wformat -Wtype-limits -Werror -DREF_CHECK -DDEBUG_UNUSED";
# These are used in addition to $gcc_devteam_warn when the compiler is clang.
# TODO(openssl-team): fix problems and investigate if (at least) the
# seems to be sufficient?
my $BSDthreads="-pthread -D_THREAD_SAFE -D_REENTRANT";
+#
+# API compability name to version number mapping.
+#
+my $maxapi = "1.1.0"; # API for "no-deprecated" builds
+my $apitable = {
+ "1.1.0" => "0x10100000L",
+ "1.0.0" => "0x10000000L",
+ "0.9.8" => "0x00908000L",
+};
+
# table of known configurations, read in from files
#
# The content of each entry can take one of two forms:
"cmac",
"cms",
"comp",
+ "crypto-mdebug",
"ct",
"deprecated",
"des",
# All of the following is disabled by default (RC5 was enabled before 0.9.8):
my %disabled = ( # "what" => "comment" [or special keyword "experimental"]
- "deprecated" => "default",
"ec_nistp_64_gcc_128" => "default",
"jpake" => "experimental",
"md2" => "default",
"rc5" => "default",
- "sctp" => "default",
+ "sctp" => "default",
"shared" => "default",
"ssl-trace" => "default",
"store" => "experimental",
"unit-test" => "default",
"zlib" => "default",
- "zlib-dynamic" => "default"
+ "zlib-dynamic" => "default",
+ "crypto-mdebug" => "default",
);
my @experimental = ();
# This is what $depflags will look like with the above defaults
# (we need this to see if we should advise the user to run "make depend"):
-my $default_depflags = " -DOPENSSL_NO_DEPRECATED -DOPENSSL_NO_EC_NISTP_64_GCC_128 -DOPENSSL_NO_JPAKE -DOPENSSL_NO_MD2 -DOPENSSL_NO_RC5 -DOPENSSL_NO_SCTP -DOPENSSL_NO_SSL_TRACE -DOPENSSL_NO_STORE -DOPENSSL_NO_UNIT_TEST";
+my $default_depflags = " -DOPENSSL_NO_CRYPTO_MDEBUG -DOPENSSL_NO_EC_NISTP_64_GCC_128 -DOPENSSL_NO_JPAKE -DOPENSSL_NO_MD2 -DOPENSSL_NO_RC5 -DOPENSSL_NO_SCTP -DOPENSSL_NO_SSL_TRACE -DOPENSSL_NO_STORE -DOPENSSL_NO_UNIT_TEST";
# Explicit "no-..." options will be collected in %disabled along with the defaults.
# To remove something from %disabled, use "enable-foo" (unless it's experimental).
my $libs;
my $target;
my $options;
+my $api;
my $make_depend=0;
my %withargs=();
my $build_prefix = "release_";
{
$prefix=$1;
}
+ elsif (/^--api=(.*)$/)
+ {
+ $api=$1;
+ }
elsif (/^--libdir=(.*)$/)
{
$libdir=$1;
}
}
+ if (defined($api) && !exists $apitable->{$api}) {
+ die "***** Unsupported api compatibility level: $api\n",
+ }
+
if (keys %unsupported_options)
{
die "***** Unsupported options: ",
}
}
-#Build the library with OPENSSL_USE_DEPRECATED if deprecation is not disabled
-if(!defined($disabled{"deprecated"}))
- {
- $cflags = "-DOPENSSL_USE_DEPRECATED $cflags";
- }
+# With "deprecated" disable all deprecated features.
+if (defined($disabled{"deprecated"})) {
+ $api = $maxapi;
+}
-# You will find shlib_mark1 and shlib_mark2 explained in Makefile.org
+# You will find shlib_mark1 and shlib_mark2 explained in Makefile.in
my $shared_mark = "";
if ($shared_target eq "")
{
while (<IN>)
{
$version=$1 if /OPENSSL.VERSION.TEXT.*OpenSSL (\S+) /;
- $version_num=$1 if /OPENSSL.VERSION.NUMBER.*0x(\S+)/;
+ $version_num=$1 if /OPENSSL.VERSION.NUMBER.*(0x\S+)/;
$shlib_version_number=$1 if /SHLIB_VERSION_NUMBER *"([^"]+)"/;
$shlib_version_history=$1 if /SHLIB_VERSION_HISTORY *"([^"]*)"/;
}
$shlib_minor=$2;
}
+if (defined($api)) {
+ my $apiflag = sprintf("-DOPENSSL_API_COMPAT=%s", $apitable->{$api});
+ $default_depflags .= " $apiflag";
+ $cflags .= " $apiflag";
+}
+
my $ecc = $cc;
$ecc = "clang" if `$cc --version 2>&1` =~ /clang/;
}
}
-open(IN,"<Makefile.org") || die "unable to read Makefile.org:$!\n";
+open(IN,"<Makefile.in") || die "unable to read Makefile.in$!\n";
unlink("$Makefile.new") || die "unable to remove old $Makefile.new:$!\n" if -e "$Makefile.new";
open(OUT,">$Makefile.new") || die "unable to create $Makefile.new:$!\n";
-print OUT "### Generated automatically from Makefile.org by Configure.\n\n";
+print OUT "### Generated automatically from Makefile.in by Configure.\n\n";
my $sdirs=0;
while (<IN>)
}
close(IN);
close(OUT);
-rename($Makefile,"$Makefile.bak") || die "unable to rename $Makefile\n" if -e $Makefile;
+rename($Makefile,"$Makefile.orig") || die "unable to rename $Makefile\n" if -e $Makefile;
rename("$Makefile.new",$Makefile) || die "unable to rename $Makefile.new\n";
print "CC =$cc\n";
print OUT "extern \"C\" {\n";
print OUT "#endif\n";
print OUT "/* OpenSSL was configured with the following options: */\n";
+
+my $openssl_api_defines = "";
+if (defined($api)) {
+ $openssl_api_defines = sprintf "#define OPENSSL_MIN_API %s\n", $apitable->{$api};
+}
my $openssl_algorithm_defines_trans = $openssl_algorithm_defines;
$openssl_experimental_defines =~ s/^\s*#\s*define\s+OPENSSL_NO_(.*)/#ifndef OPENSSL_EXPERIMENTAL_$1\n# ifndef OPENSSL_NO_$1\n# define OPENSSL_NO_$1\n# endif\n#endif/mg;
$openssl_algorithm_defines_trans =~ s/^\s*#\s*define\s+OPENSSL_(.*)/# if defined(OPENSSL_$1) \&\& !defined($1)\n# define $1\n# endif/mg;
$openssl_thread_defines =~ s/^\s*#\s*define\s+(.*)/#ifndef $1\n# define $1\n#endif/mg;
$openssl_sys_defines =~ s/^\s*#\s*define\s+(.*)/#ifndef $1\n# define $1\n#endif/mg;
$openssl_other_defines =~ s/^\s*#\s*define\s+(.*)/#ifndef $1\n# define $1\n#endif/mg;
+
print OUT $openssl_sys_defines;
print OUT "#ifndef OPENSSL_DOING_MAKEDEPEND\n\n";
print OUT $openssl_experimental_defines;
+print OUT $openssl_api_defines;
print OUT "\n";
print OUT $openssl_algorithm_defines;
print OUT "\n#endif /* OPENSSL_DOING_MAKEDEPEND */\n\n";
{ printf OUT "#%s EIGHT_BIT\n",($b8)?"define":"undef"; }
elsif (/^#((define)|(undef))\s+BN_LLONG\s*$/)
{ printf OUT "#%s BN_LLONG\n",($bn_ll)?"define":"undef"; }
- elsif (/^\#define\s+DES_LONG\s+.*/)
- { printf OUT "#define DES_LONG unsigned %s\n",
+ elsif (/^\#define\s+OSSL_DES_LONG\s+.*/)
+ { printf OUT "#define OSSL_DES_LONG unsigned %s\n",
($des_int)?'int':'long'; }
elsif (/^\#(define|undef)\s+DES_PTR/)
{ printf OUT "#%s DES_PTR\n",($des_ptr)?'define':'undef'; }
print "BF_PTR used\n" if $bf_ptr == 1;
print "BF_PTR2 used\n" if $bf_ptr == 2;
+# Copy all Makefile.in to Makefile (except top-level)
+use File::Find;
+use IO::File;
+find(sub {
+ return if ($_ ne "Makefile.in" || $File::Find::dir eq ".");
+ my $in = IO::File->new($_, "r") or
+ die sprintf "Error reading Makefile.in in %s: !$\n",
+ $File::Find::dir;
+ my $out = IO::File->new("Makefile", "w") or
+ die sprintf "Error writing Makefile in %s: !$\n",
+ $File::Find::dir;
+ print $out "# Generated from $_, do not edit\n";
+ while (my $line = <$in>) { print $out $line }
+ $in->close() or
+ die sprintf "Error reading Makefile.in in %s: !$\n",
+ $File::Find::dir;
+ $out->close() or
+ die sprintf "Error writing Makefile in %s: !$\n",
+ $File::Find::dir;
+ }, ".");
+
{
my $perlguess = $perl =~ m@^/@ ? $perl : '/usr/local/bin/perl';
# create the ms/version32.rc file if needed
if ($IsMK1MF && ($target !~ /^netware/)) {
my ($v1, $v2, $v3, $v4);
- if ($version_num =~ /(^[0-9a-f]{1})([0-9a-f]{2})([0-9a-f]{2})([0-9a-f]{2})/i) {
+ if ($version_num =~ /^0x([0-9a-f]{1})([0-9a-f]{2})([0-9a-f]{2})([0-9a-f]{2})([0-9a-f]{1})L$/i) {
$v1=hex $1;
$v2=hex $2;
$v3=hex $3;
projects / openssl.git / blobdiff