"debug-ben-debug", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -g3 -O2 -pedantic -Wall -Wshadow -Werror -pipe:(unknown):::::",
"debug-ben-strict", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -DCONST_STRICT -O2 -Wall -Wshadow -Werror -Wpointer-arith -Wcast-qual -Wwrite-strings -pipe:(unknown):::::",
"debug-rse","cc:-DTERMIOS -DL_ENDIAN -pipe -O -g -ggdb3 -Wall:(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
+"debug-bodo", "gcc:-DL_ENDIAN -O3 -g -m486 -Wall:-D_REENTRANT::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
"dist", "cc:-O:(unknown):::::",
# Basic configs that should work on any box
"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN:-D_REENTRANT:-lsocket -lnsl:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_sol_asm",
"solaris-sparc-gcc","gcc:-O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN:-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8.o::",
"solaris-usparc-gcc","gcc:-O3 -fomit-frame-pointer -mcpu=ultrasparc -Wall -DB_ENDIAN -DULTRASPARC:-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus-gcc.o:::asm/md5-sparcv8plus.o:",
+"solaris-usparc-oldgcc","gcc:-O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN -DULTRASPARC:-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus-gcc.o:::asm/md5-sparcv8plus.o:",
"debug-solaris-sparc-gcc","gcc:-O3 -g -mv8 -Wall -DB_ENDIAN:-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:::",
"debug-solaris-usparc-gcc","gcc:-O3 -g -mcpu=ultrasparc -Wall -DB_ENDIAN:-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus-gcc.o::",
# DO NOT use /xO[34] on sparc with SC3.0. It is broken, and will not pass the tests
-"solaris-sparc-cc","cc:-fast -O -Xa -DB_ENDIAN:-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_UNROLL BF_PTR:::",
+"solaris-sparc-sc3","cc:-fast -O -Xa -DB_ENDIAN:-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_UNROLL BF_PTR:::",
# SC4 is ok, better than gcc even on bn as long as you tell it -xarch=v8
# -fast slows things like DES down quite a lot
-# Don't use -xtarget=ultra with SC4.2. It is broken, and will break exptest.
-"solaris-sparc-sc4","cc:-xarch=v8 -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DBN_DIV2W:-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o::",
-"solaris-usparc-sc4","cc:-xarch=v8plus -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DBN_DIV2W:-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o::",
-# SC5.0 note: Compiler common patch 107357-01 or later is required!
-"solaris-usparc-sc5","cc:-xtarget=ultra -xarch=v8plus -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DULTRASPARC -DBN_DIV2W:-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:",
-"solaris64-usparc-sc5","cc:-xtarget=ultra -xarch=v9 -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DULTRASPARC:-D_REENTRANT:-lsocket -lnsl:SIXTY_FOUR_BIT_LONG RC4_CHAR DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:",
+"solaris-sparc-cc","cc:-xarch=v8 -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DBN_DIV2W:-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o::",
+"solaris-usparc-cc","cc:-xtarget=ultra -xarch=v8plus -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DULTRASPARC -DBN_DIV2W:-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:",
+"solaris64-usparc-cc","cc:-xtarget=ultra -xarch=v9 -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DULTRASPARC:-D_REENTRANT:-lsocket -lnsl:SIXTY_FOUR_BIT_LONG RC4_CHAR DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:",
# Sunos configs, assuming sparc for the gcc one.
##"sunos-cc", "cc:-O4 -DNOPROTO -DNOCONST:(unknown)::DES_UNROLL:::",
# 3 times faster, use if at all possible.
#"irix-gcc","gcc:-O2 -mips2::SIXTY_FOUR_BIT BN_LLONG RC4_INDEX RC4_CHAR:::",
"irix-gcc","gcc:-O2 -DTERMIOS -DB_ENDIAN:(unknown)::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR:::",
-"irix64-gcc","gcc:-mips3 -O2 -DTERMIOS -DB_ENDIAN:(unknown)::MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:::",
"irix-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN:(unknown)::BN_LLONG DES_PTR DES_RISC2 DES_UNROLL BF_PTR:::",
-"irix64-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN:(unknown)::DES_PTR DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:::",
+"irix-mips3-gcc","gcc:-mips3 -O2 -DTERMIOS -DB_ENDIAN:(unknown)::MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:::",
+"irix-mips3-cc", "cc:-n32 -mips3 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN:(unknown)::DES_PTR DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:::",
"debug-irix-cc", "cc:-w2 -g -DCRYPTO_MDEBUG -DTERMIOS -DB_ENDIAN:(unknown):::::",
# This is the n64 mode build.
-"irix-n64-cc", "cc:-64 -O2 -use_readonly_const -DTERMIOS:(unknown)::DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT:::",
+"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN:(unknown)::DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:::",
# HPUX 9.X config.
# Don't use the bundled cc. It is broken. Use HP ANSI C if possible, or gcc.
"alpha-gcc","gcc:-O3:(unknown)::SIXTY_FOUR_BIT_LONG DES_UNROLL DES_RISC1:::",
"alpha-cc", "cc:-std1 -tune host -O4 -readonly_strings:(unknown)::SIXTY_FOUR_BIT_LONG:::",
"alpha164-cc", "cc:-std1 -tune host -fast -readonly_strings:(unknown)::SIXTY_FOUR_BIT_LONG:::",
+"FreeBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer:(unknown)::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2:::",
+
# assembler versions -- currently defunct:
##"alpha-gcc","gcc:-O3:(unknown)::SIXTY_FOUR_BIT_LONG DES_UNROLL DES_RISC1:asm/alpha.o::",
##"alpha-cc", "cc:-tune host -O4 -readonly_strings:(unknown)::SIXTY_FOUR_BIT_LONG:asm/alpha.o::",
# SCO 5 - Ben Laurie <ben@algroup.co.uk> says the -O breaks the
# SCO cc.
"sco5-cc", "cc::(unknown):-lsocket:$x86_gcc_des ${x86_gcc_opts}:::", # des options?
+"sco5-gcc", "gcc:-O3 -fomit-frame-pointer:(unknown):-lsocket:BN_LLONG $x86_gcc_des ${x86_gcc_opts}:::", # the SCO assembler doesn't seem to like our assembler files ...
-# Sinix RM400
+# Sinix/ReliantUNIX RM400
+# NOTE: The CDS++ Compiler up to V2.0Bsomething has the IRIX_CC_BUG optimizer problem. Better use -g */
+"ReliantUNIX","cc:-KPIC -g -DSNI -DTERMIOS -DB_ENDIAN:-Kthread:-lsocket -lnsl -lc -L/usr/ucblib -lucb:BN_LLONG DES_PTR DES_RISC2 DES_UNROLL BF_PTR:::",
+"SINIX","cc:-O -DSNI:(unknown):-lsocket -lnsl -lc -L/usr/ucblib -lucb:RC4_INDEX RC4_CHAR:::",
"SINIX-N","/usr/ucb/cc:-O2 -misaligned:(unknown):-lucb:RC4_INDEX RC4_CHAR:::",
# Windows NT, Microsoft Visual C++ 4.0
##"ultrix","cc:-O2 -DNOPROTO -DNOCONST -DL_ENDIAN:(unknown)::::::",
# Some OpenBSD from Bob Beck <beck@obtuse.com>
-"OpenBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer:(unknown):SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2:::",
+"OpenBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer:(unknown)::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2:::",
"OpenBSD-x86", "gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -m486:(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_out_asm",
"OpenBSD", "gcc:-DTERMIOS -O3 -fomit-frame-pointer:(unknown)::BN_LLONG RC2_CHAR RC4_INDEX DES_UNROLL:::",
"OpenBSD-mips","gcc:-O2 -DL_ENDIAN:(unknown):BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR::::",
$options .= $_ unless $_ eq $target;
}
+if ($target eq "TABLE") {
+ foreach $target (sort keys %table) {
+ print_table_entry($target);
+ }
+ print "\n";
+ exit 0;
+}
+
&usage if (!defined($table{$target}));
my $IsWindows=scalar grep /^$target$/,@WinTargets;
}
close(IN);
-if ($version =~ /(^[0-9]*)\.([\0-9\.]*)/)
+if ($version =~ /(^[0-9]*)\.([0-9\.]*)/)
{
$major=$1;
$minor=$2;
# Run "make depend" manually if you want to be able to delete
# the source code files of ciphers you left out.
&dofile("tools/c_rehash",$openssldir,'^DIR=', 'DIR=%s',);
+ if ( $perl =~ m@^/@) {
+ &dofile("apps/der_chop",$perl,'^#!/', '#!%s');
+ } else {
+ # No path for Perl known ...
+ &dofile("apps/der_chop",'/usr/local/bin/perl','^#!/', '#!%s');
+ }
}
my $pwd;
rename($f,"$ff.bak") || die "unable to rename $f\n" if -e $f;
rename("$ff.new",$f) || die "unable to rename $ff.new\n";
}
+
+sub print_table_entry
+ {
+ my $target = shift;
+
+ (my $cc,my $cflags,my $thread_cflag,my $lflags,my $bn_ops,
+ my $bn_obj,my $des_obj,my $bf_obj,
+ $md5_obj,$sha1_obj,my $cast_obj,my $rc4_obj,$rmd160_obj,my $rc5_obj)=
+ split(/\s*:\s*/,$table{$target} . ":" x 20 , -1);
+
+ print <<EOF
+
+*** $target
+\$cc = $cc
+\$cflags = $cflags
+\$thread_cflag = $thread_cflag
+\$lflags = $lflags
+\$bn_ops = $bn_ops
+\$bn_obj = $bn_obj
+\$des_obj = $des_obj
+\$bf_obj = $bf_obj
+\$md5_obj = $md5_obj
+\$sha1_obj = $sha1_obj
+\$cast_obj = $cast_obj
+\$rc4_obj = $rc4_obj
+\$rmd160_obj = $rmd160_obj
+\$rc5_obj = $rc5_obj
+EOF
+ }
projects / openssl.git / blobdiff