## {- join("\n## ", @autowarntext) -}
{-
use File::Spec::Functions qw/:DEFAULT abs2rel rel2abs/;
+ use File::Basename;
# Our prefix, claimed when speaking with the VSI folks Tuesday
# January 26th 2016
our $osslprefix = 'OSSL$';
(our $osslprefix_q = $osslprefix) =~ s/\$/\\\$/;
- our $sover = sprintf "%02d%02d", $config{shlib_major}, $config{shlib_minor};
+ our $sover_dirname = sprintf "%02d%02d", split(/\./, $config{shlib_version_number});
our $osslver = sprintf "%02d%02d", split(/\./, $config{version});
our $sourcedir = $config{sourcedir};
# Because we need to make two computations of these data,
# we store them in arrays for reuse
- our @shlibs = map { $unified_info{sharednames}->{$_} || () } @{$unified_info{libraries}};
- our @install_shlibs = map { $unified_info{sharednames}->{$_} || () } @{$unified_info{install}->{libraries}};
- our @generated = ( ( map { (my $x = $_) =~ s|\.S$|\.s|; $x }
- grep { defined $unified_info{generate}->{$_} }
- map { @{$unified_info{sources}->{$_}} }
- grep { /\.o$/ } keys %{$unified_info{sources}} ),
- ( grep { /\.h$/ } keys %{$unified_info{generate}} ) );
+ our @libs =
+ map { (my $x = $_) =~ s/\.a$//; $x }
+ @{$unified_info{libraries}};
+ our @shlibs =
+ map { $unified_info{sharednames}->{$_} || () }
+ grep(!/\.a$/, @{$unified_info{libraries}});
+ our @install_libs =
+ map { (my $x = $_) =~ s/\.a$//; $x }
+ @{$unified_info{install}->{libraries}};
+ our @install_shlibs =
+ map { $unified_info{sharednames}->{$_} || () }
+ grep(!/\.a$/, @{$unified_info{install}->{libraries}});
# This is a horrible hack, but is needed because recursive inclusion of files
# in different directories does not work well with HP C.
= qq(deassign statem
deassign record);
}
+ # This makes sure things get built in the order they need
+ # to. You're welcome.
+ sub dependmagic {
+ my $target = shift;
+
+ return "$target : build_generated\n\t\pipe \$(MMS) \$(MMSQUALIFIERS) depend && \$(MMS) \$(MMSQUALIFIERS) _$target\n_$target";
+ }
#use Data::Dumper;
#print STDERR "DEBUG: before:\n", Dumper($unified_info{before});
#print STDERR "DEBUG: after:\n", Dumper($unified_info{after});
OBJ_EXT=.OBJ
DEP_EXT=.D
-LIBS={- join(", ", map { "-\n\t".$_.".OLB" } @{$unified_info{libraries}}) -}
+LIBS={- join(", ", map { "-\n\t".$_.".OLB" } @libs) -}
SHLIBS={- join(", ", map { "-\n\t".$_.".EXE" } @shlibs) -}
ENGINES={- join(", ", map { "-\n\t".$_.".EXE" } @{$unified_info{engines}}) -}
PROGRAMS={- join(", ", map { "-\n\t".$_.".EXE" } @{$unified_info{programs}}) -}
join(", ", map { "-\n\t".$_ } @deps); -}
{- output_on() if $disabled{makedepend}; "" -}
GENERATED_MANDATORY={- join(", ", map { "-\n\t".$_ } @{$unified_info{depends}->{""}} ) -}
-GENERATED={- join(", ", map { "-\n\t".$_ } @generated) -}
+GENERATED={- # common0.tmpl provides @generated
+ join(", ", map { (my $x = $_) =~ s|\.[sS]$|.asm|; "-\n\t".$x }
+ @generated) -}
-INSTALL_LIBS={- join(", ", map { "-\n\t".$_.".OLB" } @{$unified_info{install}->{libraries}}) -}
+INSTALL_LIBS={- join(", ", map { "-\n\t".$_.".OLB" } @install_libs) -}
INSTALL_SHLIBS={- join(", ", map { "-\n\t".$_.".EXE" } @install_shlibs) -}
INSTALL_ENGINES={- join(", ", map { "-\n\t".$_.".EXE" } @{$unified_info{install}->{engines}}) -}
INSTALL_PROGRAMS={- join(", ", map { "-\n\t".$_.".EXE" } @{$unified_info{install}->{programs}}) -}
MISC_SCRIPTS=[.apps]CA.pl, [.apps]tsget.pl
{- output_on() if $disabled{apps}; "" -}
+APPS_OPENSSL={- use File::Spec::Functions;
+ catfile("apps","openssl") -}
+
# DESTDIR is for package builders so that they can configure for, say,
# SYS$COMMON:[OPENSSL] and yet have everything installed in STAGING:[USER].
# In that case, configure with --prefix=SYS$COMMON:[OPENSSL] and then run
# The same, but for C
OPENSSLDIR_C={- $osslprefix -}DATAROOT:[000000]
# Where installed engines reside, for C
-ENGINESDIR_C={- $osslprefix -}ENGINES{- $sover.$target{pointer_size} -}:
-
-CC= {- $target{cc} -}
-CFLAGS= /DEFINE=({- join(",", @{$target{defines}}, @{$config{defines}},"OPENSSLDIR=\"\"\"\$(OPENSSLDIR_C)\"\"\"","ENGINESDIR=\"\"\"\$(ENGINESDIR_C)\"\"\"") -}) {- $target{cflags} -} {- $config{cflags} -}
-CFLAGS_Q=$(CFLAGS)
-DEPFLAG= /DEFINE=({- join(",", @{$config{depdefines}}) -})
-LDFLAGS= {- $target{lflags} -}
-EX_LIBS= {- $target{ex_libs} ? ",".$target{ex_libs} : "" -}{- $config{ex_libs} ? ",".$config{ex_libs} : "" -}
-LIB_CFLAGS={- $target{lib_cflags} || "" -}
-DSO_CFLAGS={- $target{dso_cflags} || "" -}
-BIN_CFLAGS={- $target{bin_cflags} || "" -}
-NO_INST_LIB_CFLAGS={- $target{no_inst_lib_cflags} || '$(LIB_CFLAGS)' -}
-NO_INST_DSO_CFLAGS={- $target{no_inst_dso_cflags} || '$(DSO_CFLAGS)' -}
-NO_INST_BIN_CFLAGS={- $target{no_inst_bin_cflags} || '$(BIN_CFLAGS)' -}
+ENGINESDIR_C={- $osslprefix -}ENGINES{- $sover_dirname.$target{pointer_size} -}:
+
+##### User defined commands and flags ################################
+
+CC={- $config{CC} -}
+CPP={- $config{CPP} -}
+DEFINES={- our $defines1 = join('', map { ",$_" } @{$config{CPPDEFINES}}) -}
+INCLUDES={- our $includes1 = join(',', @{$config{CPPINCLUDES}}) -}
+CPPFLAGS={- our $cppflags1 = join('', @{$config{CPPFLAGS}}) -}
+CFLAGS={- join('', @{$config{CFLAGS}}) -}
+LDFLAGS={- join('', @{$config{LFLAGS}}) -}
+EX_LIBS={- join('', map { ",$_" } @{$config{LDLIBS}}) -}
PERL={- $config{perl} -}
-# We let the C compiler driver to take care of .s files. This is done in
-# order to be excused from maintaining a separate set of architecture
-# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
-# gcc, then the driver will automatically translate it to -xarch=v8plus
-# and pass it down to assembler.
-AS={- $target{as} -}
-ASFLAG={- $target{asflags} -}
+AS={- $config{AS} -}
+ASFLAGS={- join(' ', @{$config{ASFLAGS}}) -}
+
+##### Special command flags ##########################################
+
+ASOUTFLAG={- $target{asoutflag} -}$(OSSL_EMPTY)
+
+##### Project flags ##################################################
+
+# Variables starting with CNF_ are common variables for all product types
+
+CNF_ASFLAGS={- join('', $target{asflags} || (),
+ @{$config{asflags}}) -}
+CNF_DEFINES={- our $defines2 = join('', map { ",$_" } @{$target{defines}},
+ @{$config{defines}}) -}
+CNF_INCLUDES={- our $includes2 = join(',', @{$target{includes}},
+ @{$config{includes}}) -}
+CNF_CPPFLAGS={- our $cppflags2 = join('', $target{cppflags} || (),
+ @{$config{cppflags}}) -}
+CNF_CFLAGS={- join('', $target{cflags} || (),
+ @{$config{cflags}}) -}
+CNF_CXXFLAGS={- join('', $target{cxxflags} || (),
+ @{$config{cxxflags}}) -}
+CNF_LDFLAGS={- join('', $target{lflags} || (),
+ @{$config{lflags}}) -}
+CNF_EX_LIBS={- join('', map{ ",$_" } @{$target{ex_libs}},
+ @{$config{ex_libs}}) -}
+
+# Variables starting with LIB_ are used to build library object files
+# and shared libraries.
+# Variables starting with DSO_ are used to build DSOs and their object files.
+# Variables starting with BIN_ are used to build programs and their object
+# files.
+
+LIB_ASFLAGS={- join(' ', $target{lib_asflags} || (),
+ @{$config{lib_asflags}},
+ '$(CNF_ASFLAGS)', '$(ASFLAGS)') -}
+LIB_DEFINES={- our $lib_defines =
+ join('', (map { ",$_" } @{$target{lib_defines}},
+ @{$target{shared_defines}},
+ @{$config{lib_defines}},
+ @{$config{shared_defines}}));
+ join('', $lib_defines,
+ (map { ",$_" } 'OPENSSLDIR="""$(OPENSSLDIR_C)"""',
+ 'ENGINESDIR="""$(ENGINESDIR_C)"""'),
+ '$(CNF_DEFINES)', '$(DEFINES)') -}
+LIB_INCLUDES={- our $lib_includes =
+ join(',', @{$target{lib_includes}},
+ @{$target{shared_includes}},
+ @{$config{lib_includes}},
+ @{$config{shared_includes}}) -}
+LIB_CPPFLAGS={- our $lib_cppflags =
+ join('', $target{lib_cppflags} || (),
+ $target{shared_cppflags} || (),
+ @{$config{lib_cppflags}},
+ @{$config{shared_cppflag}});
+ join('', "'qual_includes'",
+ '/DEFINE=(__dummy$(LIB_DEFINES))',
+ $lib_cppflags,
+ '$(CNF_CPPFLAGS)', '$(CPPFLAGS)') -}
+LIB_CFLAGS={- join('', $target{lib_cflags} || (),
+ $target{shared_cflag} || (),
+ @{$config{lib_cflags}},
+ @{$config{shared_cflag}},
+ '$(CNF_CFLAGS)', '$(CFLAGS)') -}
+LIB_LDFLAGS={- join('', $target{lib_lflags} || (),
+ $target{shared_ldflag} || (),
+ @{$config{lib_lflags}},
+ @{$config{shared_ldflag}},
+ '$(CNF_LDFLAGS)', '$(LDFLAGS)') -}
+LIB_EX_LIBS=$(CNF_EX_LIBS)$(EX_LIBS)
+DSO_ASFLAGS={- join(' ', $target{dso_asflags} || (),
+ $target{module_asflags} || (),
+ @{$config{dso_asflags}},
+ @{$config{module_asflags}},
+ '$(CNF_ASFLAGS)', '$(ASFLAGS)') -}
+DSO_DEFINES={- join('', (map { ",$_" } @{$target{dso_defines}},
+ @{$target{module_defines}},
+ @{$config{dso_defines}},
+ @{$config{module_defines}}),
+ '$(CNF_DEFINES)', '$(DEFINES)') -}
+DSO_INCLUDES={- join(',', @{$target{dso_includes}},
+ @{$target{module_includes}},
+ @{$config{dso_includes}},
+ @{$config{module_includes}}) -}
+DSO_CPPFLAGS={- join('', "'qual_includes'",
+ '/DEFINE=(__dummy$(DSO_DEFINES))',
+ $target{dso_cppflags} || (),
+ $target{module_cppflags} || (),
+ @{$config{dso_cppflags}},
+ @{$config{module_cppflags}},
+ '$(CNF_CPPFLAGS)', '$(CPPFLAGS)') -}
+DSO_CFLAGS={- join('', $target{dso_cflags} || (),
+ $target{module_cflags} || (),
+ @{$config{dso_cflags}},
+ @{$config{module_cflags}},
+ '$(CNF_CFLAGS)', '$(CFLAGS)') -}
+DSO_LDFLAGS={- join('', $target{dso_lflags} || (),
+ $target{module_ldflags} || (),
+ @{$config{dso_lflags}},
+ @{$config{module_ldflags}},
+ '$(CNF_LDFLAGS)', '$(LDFLAGS)') -}
+DSO_EX_LIBS=$(CNF_EX_LIBS) $(EX_LIBS)
+BIN_ASFLAGS={- join(' ', $target{bin_asflags} || (),
+ @{$config{bin_asflags}},
+ '$(CNF_ASFLAGS)', '$(ASFLAGS)') -}
+BIN_DEFINES={- join('', (map { ",$_" } @{$target{bin_defines}},
+ @{$config{bin_defines}}),
+ '$(CNF_DEFINES)', '$(DEFINES)') -}
+BIN_INCLUDES={- join(',', @{$target{bin_includes}},
+ @{$config{bin_includes}}) -}
+BIN_CPPFLAGS={- join('', "'qual_includes'",
+ '/DEFINE=(__dummy$(DSO_DEFINES))',
+ $target{bin_cppflags} || (),
+ @{$config{bin_cppflag}},
+ '$(CNF_CPPFLAGS)', '$(CPPFLAGS)') -}
+BIN_CFLAGS={- join('', $target{bin_cflag} || (),
+ @{$config{bin_cflag}},
+ '$(CNF_CFLAGS)', '$(CFLAGS)') -}
+BIN_LDFLAGS={- join('', $target{bin_lflags} || (),
+ @{$config{bin_lflags}} || (),
+ '$(CNF_LDFLAGS)', '$(LDFLAGS)') -}
+BIN_EX_LIBS=$(CNF_EX_LIBS) $(EX_LIBS)
+NO_INST_LIB_CFLAGS={- join('', $target{no_inst_lib_cflags}
+ // $target{lib_cflags}
+ // (),
+ $target{shared_cflag} || (),
+ @{$config{lib_cflags}},
+ @{$config{shared_cflag}},
+ '$(CNF_CFLAGS)', '$(CFLAGS)') -}
+NO_INST_DSO_CFLAGS={- join('', $target{no_inst_lib_cflags}
+ // $target{lib_cflags}
+ // (),
+ $target{dso_cflags} || (),
+ @{$config{lib_cflags}},
+ @{$config{dso_cflags}},
+ '$(CNF_CFLAGS)', '$(CFLAGS)') -}
+NO_INST_BIN_CFLAGS={- join('', $target{no_inst_bin_cflags}
+ // $target{bin_cflags}
+ // (),
+ @{$config{bin_cflags}},
+ '$(CNF_CFLAGS)', '$(CFLAGS)') -}
+
+PERLASM_SCHEME={- $target{perlasm_scheme} -}
+
+# CPPFLAGS_Q is used for one thing only: to build up buildinf.h
+CPPFLAGS_Q={- (my $c = $lib_cppflags.$cppflags2.$cppflags1) =~ s|"|""|g;
+ (my $d = $lib_defines.$defines2.$defines1) =~ s|"|""|g;
+ my $i = join(',', $lib_includes || (), $includes2 || (),
+ $includes1 || ());
+ my $x = $c;
+ $x .= "/INCLUDE=($i)" if $i;
+ $x .= "/DEFINE=($d)" if $d;
+ $x; -}
# .FIRST and .LAST are special targets with MMS and MMK.
# The defines in there are for C. includes that look like
$(NODEBUG) ! Set up logical names for the libraries, so LINK and
$(NODEBUG) ! running programs can use them.
$(NODEBUG) !
- $(NODEBUG) {- join("\n\t\$(NODEBUG) ", map { "DEFINE ".uc($_)." 'F\$ENV(\"DEFAULT\")'".uc($_)."\$(SHLIB_EXT)" } map { $unified_info{sharednames}->{$_} || () } @{$unified_info{libraries}}) || "!" -}
+ $(NODEBUG) {- join("\n\t\$(NODEBUG) ", map { "DEFINE ".uc($_)." 'F\$ENV(\"DEFAULT\")'".uc($_)."\$(SHLIB_EXT)" } @shlibs) || "!" -}
.LAST :
- $(NODEBUG) {- join("\n\t\$(NODEBUG) ", map { "DEASSIGN ".uc($_) } map { $unified_info{sharednames}->{$_} || () } @{$unified_info{libraries}}) || "!" -}
+ $(NODEBUG) {- join("\n\t\$(NODEBUG) ", map { "DEASSIGN ".uc($_) } @shlibs) || "!" -}
$(NODEBUG) DEASSIGN ossl_dataroot
$(NODEBUG) DEASSIGN ossl_installroot
$(NODEBUG) DEASSIGN internal
# The main targets ###################################################
-all : build_generated, -
- build_libs_nodep, build_engines_nodep, build_programs_nodep, -
- depend
+{- dependmagic('all'); -} : build_libs_nodep, build_engines_nodep, build_programs_nodep
+{- dependmagic('build_libs'); -} : build_libs_nodep
+{- dependmagic('build_engines'); -} : build_engines_nodep
+{- dependmagic('build_programs'); -} : build_programs_nodep
-build_libs : build_generated, build_libs_nodep, depend
+build_generated : $(GENERATED_MANDATORY)
build_libs_nodep : $(LIBS), $(SHLIBS)
-build_engines : build_generated, build_engines_nodep, depend
build_engines_nodep : $(ENGINES)
-build_programs : build_generated, build_programs_nodep, depend
build_programs_nodep : $(PROGRAMS), $(SCRIPTS)
-build_generated : $(GENERATED_MANDATORY)
-
# Kept around for backward compatibility
build_apps build_tests : build_programs
-test tests : build_generated, build_programs_nodep, build_engines_nodep, -
- depend
+# Convenience target to prebuild all generated files, not just the mandatory
+# ones
+build_all_generated : $(GENERATED_MANDATORY) $(GENERATED)
+ @ ! {- output_off() if $disabled{makedepend}; "" -}
+ @ WRITE SYS$OUTPUT "Warning: consider configuring with no-makedepend, because if"
+ @ WRITE SYS$OUTPUT " target system doesn't have $(PERL),"
+ @ WRITE SYS$OUTPUT " then make will fail..."
+ @ ! {- output_on() if $disabled{makedepend}; "" -}
+
+test : tests
+{- dependmagic('tests'); -} : build_programs_nodep, build_engines_nodep
@ ! {- output_off() if $disabled{tests}; "" -}
SET DEFAULT [.test]{- move("test") -}
+ CREATE/DIR [.test-runs]
DEFINE SRCTOP {- sourcedir() -}
DEFINE BLDTOP {- builddir() -}
+ DEFINE RESULT_D {- builddir(qw(test test-runs)) -}
DEFINE OPENSSL_ENGINES {- builddir("engines") -}
DEFINE OPENSSL_DEBUG_MEMORY "on"
IF "$(VERBOSE)" .NES. "" THEN DEFINE VERBOSE "$(VERBOSE)"
# Because VMS wants the generation number (or *) to delete files, we can't
# use $(LIBS), $(PROGRAMS), $(GENERATED) and $(ENGINES)directly.
libclean :
- {- join("\n\t", map { "- DELETE $_.OLB;*" } @{$unified_info{libraries}}) || "@ !" -}
- {- join("\n\t", map { "- DELETE $_.EXE;*,$_.DSF;*,$_.MAP;*,$_.OPT;*" } @shlibs) || "@ !" -}
+ {- join("\n\t", map { "- DELETE $_.OLB;*" } @libs) || "@ !" -}
+ {- join("\n\t", map { "- DELETE $_.EXE;*,$_.MAP;*" } @shlibs) || "@ !" -}
clean : libclean
- {- join("\n\t", map { "- DELETE $_.EXE;*,$_.DSF;*,$_.OPT;*" } @{$unified_info{programs}}) || "@ !" -}
- {- join("\n\t", map { "- DELETE $_.EXE;*,$_.DSF;*,$_.OPT;*" } @{$unified_info{engines}}) || "@ !" -}
+ {- join("\n\t", map { "- DELETE $_.EXE;*,$_.OPT;*" } @{$unified_info{programs}}) || "@ !" -}
+ {- join("\n\t", map { "- DELETE $_.EXE;*,$_.OPT;*" } @{$unified_info{engines}}) || "@ !" -}
{- join("\n\t", map { "- DELETE $_;*" } @{$unified_info{scripts}}) || "@ !" -}
+ {- join("\n\t", map { "- DELETE $_;*" } @{$unified_info{depends}->{""}}) || "@ !" -}
{- join("\n\t", map { "- DELETE $_;*" } @generated) || "@ !" -}
- DELETE [...]*.MAP;*
- DELETE [...]*.D;*
depend : descrip.mms
descrip.mms : FORCE
@ ! {- output_off() if $disabled{makedepend}; "" -}
- @ $(PERL) -pe "if (/^# DO NOT DELETE.*/) { exit(0); }" -
- < descrip.mms > descrip.mms-new
- @ OPEN/APPEND DESCRIP descrip.mms-new
- @ WRITE DESCRIP "# DO NOT DELETE THIS LINE -- make depend depends on it."
- {- join("\n\t", map { "\@ IF F\$SEARCH(\"$_\") .NES. \"\" THEN TYPE $_ /OUTPUT=DESCRIP:" } @deps); -}
- @ CLOSE DESCRIP
- @ PIPE ( $(PERL) -e "use File::Compare qw/compare_text/; my $x = compare_text(""descrip.mms"",""descrip.mms-new""); exit(0x10000000 + ($x == 0));" || -
- RENAME descrip.mms-new descrip.mms )
- @ IF F$SEARCH("descrip.mms-new") .NES. "" THEN DELETE descrip.mms-new;*
- -@ SPAWN/OUTPUT=NLA0: PURGE/NOLOG descrip.mms
+ @ $(PERL) {- sourcefile("util", "add-depends.pl") -} "VMS C"
@ ! {- output_on() if $disabled{makedepend}; "" -}
# Install helper targets #############################################
- CREATE/DIR ossl_installroot:[LIB.'arch']
{- join("\n ",
map { "COPY/PROT=W:R $_.OLB ossl_installroot:[LIB.'arch']" }
- @{$unified_info{install}->{libraries}}) -}
+ @install_libs) -}
install_dev : install_shared _install_dev_ns
install_engines : check_INSTALLTOP
@ {- output_off() unless scalar @{$unified_info{engines}}; "" -} !
@ WRITE SYS$OUTPUT "*** Installing engines"
- - CREATE/DIR ossl_installroot:[ENGINES{- $sover.$target{pointer_size} -}.'arch']
+ - CREATE/DIR ossl_installroot:[ENGINES{- $sover_dirname.$target{pointer_size} -}.'arch']
{- join("\n ",
- map { "COPY/PROT=W:RE $_.EXE ossl_installroot:[ENGINES$sover$target{pointer_size}.'arch']" }
+ map { "COPY/PROT=W:RE $_.EXE ossl_installroot:[ENGINES$sover_dirname$target{pointer_size}.'arch']" }
@{$unified_info{install}->{engines}}) -}
@ {- output_on() unless scalar @{$unified_info{engines}}; "" -} !
WRITE CONFIG "our %config = ("
WRITE CONFIG " target => '","{- $config{target} -}","',"
WRITE CONFIG " version => '","{- $config{version} -}","',"
+ WRITE CONFIG " shlib_version_number => '","{- $config{shlib_version_number} -}","',"
WRITE CONFIG " shlib_major => '","{- $config{shlib_major} -}","',"
WRITE CONFIG " shlib_minor => '","{- $config{shlib_minor} -}","',"
WRITE CONFIG " no_shared => '","{- $disabled{shared} -}","',"
# Building targets ###################################################
configdata.pm : $(SRCDIR)Configure $(SRCDIR)config.com {- join(" ", @{$config{build_file_templates}}, @{$config{build_infos}}, @{$config{conf_files}}) -}
- @ WRITE SYS$OUTPUT "Reconfiguring..."
- perl $(SRCDIR)Configure reconf
+ perl configdata.pm -r
@ WRITE SYS$OUTPUT "*************************************************"
@ WRITE SYS$OUTPUT "*** ***"
@ WRITE SYS$OUTPUT "*** Please run the same mms command again ***"
@ WRITE SYS$OUTPUT "*************************************************"
@ PIPE ( EXIT %X10000000 )
+reconfigure reconf :
+ perl configdata.pm -r
+
{-
use File::Basename;
use File::Spec::Functions qw/abs2rel rel2abs catfile catdir/;
: $unified_info{sharednames}->{$_}.".EXE" } @_;
}
+ # Helper function to deal with inclusion directory specs.
+ # We have to deal with two things:
+ # 1. comma separation and no possibility of trailing comma
+ # 2. no inclusion directories given at all
+ # 3. long compiler command lines
+ # To resolve 1, we need to iterate through the sources of inclusion
+ # directories, and only add a comma when needed.
+ # To resolve 2, we need to have a variable that will hold the whole
+ # inclusion qualifier, or be the empty string if there are no inclusion
+ # directories. That's the symbol 'qual_includes' that's used in CPPFLAGS
+ # To resolve 3, we creata a logical name TMP_INCLUDES: to hold the list
+ # of inclusion directories.
+ #
+ # This function returns a list of two lists, one being the collection of
+ # commands to execute before the compiler is called, and the other being
+ # the collection of commands to execute after. It takes as arguments the
+ # collection of strings to include as directory specs.
+ sub includes {
+ my @stuff = ( @_ );
+ my @before = (
+ 'qual_includes :=',
+ );
+ my @after = (
+ 'DELETE/SYMBOL/LOCAL qual_includes',
+ );
+
+ if (scalar @stuff > 0) {
+ push @before, 'tmp_includes := '.shift(@stuff);
+ while (@stuff) {
+ push @before, 'tmp_add := '.shift(@stuff);
+ push @before, 'IF tmp_includes .NES. "" .AND. tmp_add .NES. "" THEN tmp_includes = tmp_includes + ","';
+ push @before, 'tmp_includes = tmp_includes + tmp_add';
+ }
+ push @before, "IF tmp_includes .NES. \"\" THEN DEFINE tmp_includes 'tmp_includes'";
+ push @before, 'IF tmp_includes .NES. "" THEN qual_includes := /INCLUDE=(tmp_includes:)';
+ push @before, 'DELETE/SYMBOL/LOCAL tmp_includes';
+ push @before, 'DELETE/SYMBOL/LOCAL tmp_add';
+ push @after, 'DEASSIGN tmp_includes:'
+ }
+ return ([ @before ], [ @after ]);
+ }
+
sub generatesrc {
my %args = @_;
+ (my $target = $args{src}) =~ s/\.[sS]$/.asm/;
my $generator = join(" ", @{$args{generator}});
my $generator_incs = join("", map { ' "-I'.$_.'"' } @{$args{generator_incs}});
my $deps = join(", -\n\t\t", @{$args{generator_deps}}, @{$args{deps}});
- if ($args{src} !~ /\.[sS]$/) {
+ if ($target !~ /\.asm$/) {
if ($args{generator}->[0] =~ m|^.*\.in$|) {
my $dofile = abs2rel(rel2abs(catfile($config{sourcedir},
"util", "dofile.pl")),
rel2abs($config{builddir}));
return <<"EOF";
-$args{src} : $args{generator}->[0] $deps
+$target : $args{generator}->[0] $deps
\$(PERL) "-I\$(BLDDIR)" "-Mconfigdata" $dofile \\
- "-o$target{build_file}" $generator > \$@
+ "-o$target{build_file}" $generator > \$\@
EOF
} else {
return <<"EOF";
-$args{src} : $args{generator}->[0] $deps
- \$(PERL)$generator_incs $generator > \$@
+$target : $args{generator}->[0] $deps
+ \$(PERL)$generator_incs $generator > \$\@
EOF
}
} else {
- die "No method to generate assembler source present.\n";
+ if ($args{generator}->[0] =~ /\.pl$/) {
+ $generator = '$(PERL)'.$generator_incs.' '.$generator;
+ } elsif ($args{generator}->[0] =~ /\.S$/) {
+ $generator = undef;
+ } else {
+ die "Generator type for $src unknown: $generator\n";
+ }
+
+ my $cppflags = {
+ lib => '$(LIB_CFLAGS) $(LIB_CPPFLAGS)',
+ dso => '$(DSO_CFLAGS) $(DSO_CPPFLAGS)',
+ bin => '$(BIN_CFLAGS) $(BIN_CPPFLAGS)'
+ } -> {$args{intent}};
+ my @incs_cmds = includes({ lib => '$(LIB_INCLUDES)',
+ dso => '$(DSO_INCLUDES)',
+ bin => '$(BIN_INCLUDES)' } -> {$args{intent}},
+ '$(CNF_INCLUDES)',
+ '$(INCLUDES)',
+ @{$args{incs}});
+ my $incs_on = join("\n\t\@ ", @{$incs_cmds[0]}) || '!';
+ my $incs_off = join("\n\t\@ ", @{$incs_cmds[1]}) || '!';
+ if (defined($generator)) {
+ # If the target is named foo.S in build.info, we want to
+ # end up generating foo.s in two steps.
+ if ($args{src} =~ /\.S$/) {
+ return <<"EOF";
+$target : $args{generator}->[0] $deps
+ $generator \$\@-S
+ \@ $incs_on
+ PIPE \$(CPP) $cppflags \$\@-S | -
+ \$(PERL) -ne "/^#(\\s*line)?\\s*[0-9]+\\s+""/ or print" > \$\@-i
+ \@ $incs_off
+ RENAME \$\@-i \$\@
+ DELETE \$\@-S
+EOF
+ }
+ # Otherwise....
+ return <<"EOF";
+$target : $args{generator}->[0] $deps
+ $generator \$\@
+EOF
+ }
+ return <<"EOF";
+$target : $args{generator}->[0] $deps
+ \@ $incs_on
+ SHOW SYMBOL qual_includes
+ PIPE \$(CPP) $cppflags $args{generator}->[0] | -
+ \$(PERL) "-ne" "/^#(\\s*line)?\\s*[0-9]+\\s+""/ or print" > \$\@
+ \@ $incs_off
+EOF
}
}
sub src2obj {
my %args = @_;
- my $obj = $args{obj};
- my $deps = join(", -\n\t\t", @{$args{srcs}}, @{$args{deps}});
+ my @srcs = map { (my $x = $_) =~ s/\.s$/.asm/; $x
+ } ( @{$args{srcs}} );
+ (my $obj = $args{obj}) =~ s|\.o$||;
+ my $deps = join(", -\n\t\t", @srcs, @{$args{deps}});
# Because VMS C isn't very good at combining a /INCLUDE path with
# #includes having a relative directory (like '#include "../foo.h"),
my $objd = abs2rel(rel2abs(dirname($obj)), rel2abs($forward));
my $objn = basename($obj);
my $srcs =
- join(", ",
- map { abs2rel(rel2abs($_), rel2abs($forward)) } @{$args{srcs}});
- my $ecflags;
+ join(", ", map { abs2rel(rel2abs($_), rel2abs($forward)) } @srcs);
+ my $before = $unified_info{before}->{$obj.".OBJ"} || "\@ !";
+ my $after = $unified_info{after}->{$obj.".OBJ"} || "\@ !";
+
+ if ($srcs[0] =~ /\.asm$/) {
+ my $asflags = { lib => ' $(LIB_ASFLAGS)',
+ dso => ' $(DSO_ASFLAGS)',
+ bin => ' $(BIN_ASFLAGS)' } -> {$args{intent}};
+ return <<"EOF";
+$obj.OBJ : $deps
+ ${before}
+ SET DEFAULT $forward
+ \$(AS) $asflags \$(ASOUTFLAG)${objd}${objn}.OBJ $srcs
+ SET DEFAULT $backward
+EOF
+ }
+
+ my $cflags;
if ($args{installed}) {
- $ecflags = { lib => '$(LIB_CFLAGS)',
- dso => '$(DSO_CFLAGS)',
- bin => '$(BIN_CFLAGS)' } -> {$args{intent}};
+ $cflags = { lib => '$(LIB_CFLAGS)',
+ dso => '$(DSO_CFLAGS)',
+ bin => '$(BIN_CFLAGS)' } -> {$args{intent}};
} else {
- $ecflags = { lib => '$(NO_INST_LIB_CFLAGS)',
- dso => '$(NO_INST_DSO_CFLAGS)',
- bin => '$(NO_INST_BIN_CFLAGS)' } -> {$args{intent}};
+ $cflags = { lib => '$(NO_INST_LIB_CFLAGS)',
+ dso => '$(NO_INST_DSO_CFLAGS)',
+ bin => '$(NO_INST_BIN_CFLAGS)' } -> {$args{intent}};
}
- my $incs_on = "\@ !";
- my $incs_off = "\@ !";
- my $incs = "";
- my @incs = ();
- push @incs, @{$args{incs}} if @{$args{incs}};
- unless ($disabled{zlib}) {
- # GNV$ZLIB_INCLUDE is the standard logical name for later zlib
- # incarnations.
- push @incs, ($withargs{zlib_include} || 'GNV$ZLIB_INCLUDE:');
- }
- if (@incs) {
- $incs_on =
- "DEFINE tmp_includes "
- .join(",-\n\t\t\t", map {
- file_name_is_absolute($_)
- ? $_ : catdir($backward,$_)
- } @incs);
- $incs_off = "DEASSIGN tmp_includes";
- $incs = " /INCLUDE=(tmp_includes:)";
- }
- my $before = $unified_info{before}->{$obj.".OBJ"} || "\@ !";
- my $after = $unified_info{after}->{$obj.".OBJ"} || "\@ !";
+ $cflags .= { lib => '$(LIB_CPPFLAGS)',
+ dso => '$(DSO_CPPFLAGS)',
+ bin => '$(BIN_CPPFLAGS)' } -> {$args{intent}};
+
+ my @incs_cmds = includes({ lib => '$(LIB_INCLUDES)',
+ dso => '$(DSO_INCLUDES)',
+ bin => '$(BIN_INCLUDES)' } -> {$args{intent}},
+ '$(INCLUDES)',
+ map {
+ file_name_is_absolute($_)
+ ? $_ : catdir($backward,$_)
+ } @{$args{incs}});
+ my $incs_on = join("\n\t\@ ", @{$incs_cmds[0]}) || '!';
+ my $incs_off = join("\n\t\@ ", @{$incs_cmds[1]}) || '!';
my $depbuild = $disabled{makedepend} ? ""
- : " /MMS=(FILE=${objd}${objn}.tmp-D,TARGET=$obj.OBJ)";
+ : " /MMS=(FILE=${objd}${objn}.D,TARGET=$obj.OBJ)";
return <<"EOF";
$obj.OBJ : $deps
${before}
SET DEFAULT $forward
- $incs_on
- \$(CC) \$(CFLAGS)${ecflags}${incs}${depbuild} /OBJECT=${objd}${objn}.OBJ /REPOSITORY=$backward $srcs
- $incs_off
+ \@ $incs_on
+ \$(CC) ${cflags}${depbuild} /OBJECT=${objd}${objn}.OBJ /REPOSITORY=$backward $srcs
+ \@ $incs_off
SET DEFAULT $backward
${after}
- \@ PIPE ( \$(PERL) -e "use File::Compare qw/compare_text/; my \$x = compare_text(""$obj.D"",""$obj.tmp-D""); exit(0x10000000 + (\$x == 0));" || -
- RENAME $obj.tmp-D $obj.d )
- \@ IF F\$SEARCH("$obj.tmp-D") .NES. "" THEN DELETE $obj.tmp-D;*
- PURGE $obj.OBJ
EOF
}
my $shlib = $args{shlib};
my $libd = dirname($lib);
my $libn = basename($lib);
- (my $mkdef_key = $libn) =~ s/^${osslprefix_q}lib([^0-9]*)\d*/$1/i;
+ my @objs = map { (my $x = $_) =~ s|\.o$|.OBJ|; $x }
+ grep { $_ =~ m|\.o$| }
+ @{$args{objs}};
+ my @defs = grep { $_ =~ /\.opt$/ } @{$args{objs}};
my @deps = compute_lib_depends(@{$args{deps}});
- my $deps = join(", -\n\t\t", @deps);
+ die "More than one symbol vector" if scalar @defs > 1;
+ my $deps = join(", -\n\t\t", @defs, @deps);
my $shlib_target = $disabled{shared} ? "" : $target{shared_target};
- my $ordinalsfile = defined($args{ordinals}) ? $args{ordinals}->[1] : "";
- my $engine_opt = abs2rel(rel2abs(catfile($config{sourcedir},
- "VMS", "engine.opt")),
- rel2abs($config{builddir}));
- my $mkdef_pl = abs2rel(rel2abs(catfile($config{sourcedir},
- "util", "mkdef.pl")),
- rel2abs($config{builddir}));
my $translatesyms_pl = abs2rel(rel2abs(catfile($config{sourcedir},
"VMS", "translatesyms.pl")),
rel2abs($config{builddir}));
# previous line's file spec as default, so if no directory spec
# is present in the current line and the previous line has one that
# doesn't apply, you're in for a surprise.
- my $write_opt =
+ my $write_opt1 =
+ join(",-\"\n\t", map { my $x = $_ =~ /\[/ ? $_ : "[]".$_;
+ "WRITE OPT_FILE \"$x" } @objs).
+ "\"";
+ my $write_opt2 =
join("\n\t", map { my $x = $_ =~ /\[/ ? $_ : "[]".$_;
$x =~ s|(\.EXE)|$1/SHARE|;
$x =~ s|(\.OLB)|$1/LIB|;
"WRITE OPT_FILE \"$x\"" } @deps)
|| "\@ !";
- return <<"EOF";
-$shlib.EXE : $lib.OLB $deps $ordinalsfile
- \$(PERL) $mkdef_pl "$mkdef_key" "VMS" > $shlib.SYMVEC-tmp
- \$(PERL) $translatesyms_pl \$(BLDDIR)CXX\$DEMANGLER_DB. < $shlib.SYMVEC-tmp > $shlib.SYMVEC
- DELETE $shlib.SYMVEC-tmp;*
- OPEN/WRITE/SHARE=READ OPT_FILE $shlib.OPT
- WRITE OPT_FILE "IDENTIFICATION=""V$config{version}"""
- TYPE $shlib.SYMVEC /OUTPUT=OPT_FILE:
- WRITE OPT_FILE "$lib.OLB/LIBRARY"
- $write_opt
+ return <<"EOF"
+$shlib.EXE : $lib.OLB $deps
+ \$(PERL) $translatesyms_pl \$(BLDDIR)CXX\$DEMANGLER_DB. < $defs[0] > $defs[0]-translated
+ OPEN/WRITE/SHARE=READ OPT_FILE $lib-components.OPT
+ $write_opt1
+ $write_opt2
CLOSE OPT_FILE
- LINK \$(LDFLAGS)/SHARE=\$\@ $shlib.OPT/OPT \$(EX_LIBS)
- DELETE $shlib.SYMVEC;*
- PURGE $shlib.EXE,$shlib.OPT,$shlib.MAP
+ LINK \$(LIB_LDFLAGS)/SHARE=\$\@ $defs[0]-translated/OPT,-
+ $lib-components.OPT/OPT \$(LIB_EX_LIBS)
+ DELETE $defs[0]-translated;*,$lib-components.OPT;*
+ PURGE $shlib.EXE,$shlib.MAP
EOF
+ . ($config{target} =~ m|alpha| ? "" : <<"EOF"
+ SET IMAGE/FLAGS=(NOCALL_DEBUG) \$\@
+EOF
+ );
}
sub obj2dso {
my %args = @_;
my $libd = dirname($lib);
my $libn = basename($lib);
(my $libn_nolib = $libn) =~ s/^lib//;
- my @objs = map { "$_.OBJ" } @{$args{objs}};
+ my @objs = map { (my $x = $_) =~ s|\.o$|.OBJ|; $x } @{$args{objs}};
my @deps = compute_lib_depends(@{$args{deps}});
my $deps = join(", -\n\t\t", @objs, @deps);
my $shlib_target = $disabled{shared} ? "" : $target{shared_target};
$x =~ s|(\.OLB)|$1/LIB|;
"WRITE OPT_FILE \"$x\"" } @deps)
|| "\@ !";
- return <<"EOF";
+ return <<"EOF"
$lib.EXE : $deps
OPEN/WRITE/SHARE=READ OPT_FILE $lib.OPT
TYPE $engine_opt /OUTPUT=OPT_FILE:
$write_opt1
$write_opt2
CLOSE OPT_FILE
- LINK \$(LDFLAGS)/SHARE=\$\@ $lib.OPT/OPT \$(EX_LIBS)
+ LINK \$(DSO_LDFLAGS)/SHARE=\$\@ $lib.OPT/OPT \$(DSO_EX_LIBS)
- PURGE $lib.EXE,$lib.OPT,$lib.MAP
EOF
+ . ($config{target} =~ m|alpha| ? "" : <<"EOF"
+ SET IMAGE/FLAGS=(NOCALL_DEBUG) \$\@
+EOF
+ );
}
sub obj2lib {
my %args = @_;
- my $lib = $args{lib};
- my $objs = join(", -\n\t\t", map { $_.".OBJ" } (@{$args{objs}}));
- my $fill_lib = join("\n\t", (map { "LIBRARY/REPLACE $lib.OLB $_.OBJ" }
- @{$args{objs}}));
+ (my $lib = $args{lib}) =~ s/\.a$//;
+ my @objs = map { (my $x = $_) =~ s|\.o$|.OBJ|; $x } @{$args{objs}};
+ my $objs = join(", -\n\t\t", @objs);
+ my $fill_lib = join("\n\t", (map { "LIBRARY/REPLACE $lib.OLB $_" }
+ @objs));
return <<"EOF";
$lib.OLB : $objs
LIBRARY/CREATE/OBJECT $lib.OLB
my $bin = $args{bin};
my $bind = dirname($bin);
my $binn = basename($bin);
- my @objs = map { "$_.OBJ" } @{$args{objs}};
+ my @objs = map { (my $x = $_) =~ s|\.o$|.OBJ|; $x } @{$args{objs}};
+ my $objs = join(",", @objs);
my @deps = compute_lib_depends(@{$args{deps}});
my $deps = join(", -\n\t\t", @objs, @deps);
+
+ my $olb_count = scalar grep(m|\.OLB$|, @deps);
+ my $analyse_objs = "@ !";
+ if ($olb_count > 0) {
+ my $analyse_quals =
+ $config{target} =~ m|alpha| ? "/GSD" : "/SECTIONS=SYMTAB";
+ $analyse_objs = "- pipe ANALYSE/OBJECT$analyse_quals $objs | SEARCH SYS\$INPUT \"\"\"main\"\"\" ; nomain = \$severity .NE. 1"
+ }
# The "[]" hack is because in .OPT files, each line inherits the
# previous line's file spec as default, so if no directory spec
# is present in the current line and the previous line has one that
# doesn't apply, you're in for a surprise.
my $write_opt1 =
join(",-\"\n\t", map { my $x = $_ =~ /\[/ ? $_ : "[]".$_;
- "WRITE OPT_FILE \"$x" } @objs).
+ "\@ WRITE OPT_FILE \"$x" } @objs).
"\"";
my $write_opt2 =
- join("\n\t", map { my $x = $_ =~ /\[/ ? $_ : "[]".$_;
- $x =~ s|(\.EXE)|$1/SHARE|;
- $x =~ s|(\.OLB)|$1/LIB|;
- "WRITE OPT_FILE \"$x\"" } @deps)
+ join("\n\t", map { my @lines = ();
+ my $x = $_ =~ /\[/ ? $_ : "[]".$_;
+ if ($x =~ m|\.EXE$|) {
+ push @lines, "\@ WRITE OPT_FILE \"$x/SHARE\"";
+ } elsif ($x =~ m|\.OLB$|) {
+ (my $l = $x) =~ s/\W/_/g;
+ push @lines,
+ "\@ IF nomain THEN WRITE OPT_FILE \"$x/LIB\$(INCLUDE_MAIN_$l)\"",
+ "\@ IF .NOT. nomain THEN WRITE OPT_FILE \"$x/LIB\""
+ }
+ @lines
+ } @deps)
|| "\@ !";
# The linking commands looks a bit complex, but it's for good reason.
# When you link, say, foo.obj, bar.obj and libsomething.exe/share, and
# by default), and so someone building doesn't have to worry where it
# isn't necessary. If there are other warnings, however, we show them
# and let it break the build.
- return <<"EOF";
+ return <<"EOF"
$bin.EXE : $deps
- OPEN/WRITE/SHARE=READ OPT_FILE $bin.OPT
+ $analyse_objs
+ @ OPEN/WRITE/SHARE=READ OPT_FILE $bin.OPT
$write_opt1
$write_opt2
- CLOSE OPT_FILE
+ @ CLOSE OPT_FILE
+ TYPE $bin.opt ! For debugging
- pipe SPAWN/WAIT/NOLOG/OUT=$bin.LINKLOG -
- LINK \$(LDFLAGS)/EXEC=\$\@ $bin.OPT/OPT \$(EX_LIBS) ; -
+ LINK \$(BIN_LDFLAGS)/EXEC=\$\@ $bin.OPT/OPT \$(BIN_EX_LIBS) ; -
link_status = \$status ; link_severity = link_status .AND. 7
@ search_severity = 1
-@ IF link_severity .EQ. 0 THEN -
@ IF .NOT. link_severity THEN SPAWN/WAIT/NOLOG EXIT 'link_status'
- PURGE $bin.EXE,$bin.OPT
EOF
+ . ($config{target} =~ m|alpha| ? "" : <<"EOF"
+ SET IMAGE/FLAGS=(NOCALL_DEBUG) \$\@
+EOF
+ );
}
sub in2script {
my %args = @_;
projects / openssl.git / blobdiff