Changes between 0.9.8b and 0.9.9 [xx XXX xxxx]
+ *) Change the array representation of binary polynomials: the list
+ of degrees of non-zero coefficients is now terminated with -1.
+ Previously it was terminated with 0, which was also part of the
+ value; thus, the array representation was not applicable to
+ polynomials where t^0 has coefficient zero. This change makes
+ the array representation useful in a more general context.
+ [Douglas Stebila]
+
+ *) Various modifications and fixes to SSL/TLS cipher string
+ handling. For ECC, the code now distinguishes between fixed ECDH
+ with RSA certificates on the one hand and with ECDSA certificates
+ on the other hand, since these are separate ciphersuites. The
+ unused code for Fortezza ciphersuites has been removed.
+
+ For consistency with EDH, ephemeral ECDH is now called "EECDH"
+ (not "ECDHE"). For consistency with the code for DH
+ certificates, use of ECDH certificates is now considered ECDH
+ authentication, not RSA or ECDSA authentication (the latter is
+ merely the CA's signing algorithm and not actively used in the
+ protocol).
+
+ The temporary ciphersuite alias "ECCdraft" is no longer
+ available, and ECC ciphersuites are no longer excluded from "ALL"
+ and "DEFAULT". The following aliases now exist for RFC 4492
+ ciphersuites, most of these by analogy with the DH case:
+
+ kECDHr - ECDH cert, signed with RSA
+ kECDHe - ECDH cert, signed with ECDSA
+ kECDH - ECDH cert (signed with either RSA or ECDSA)
+ kEECDH - ephemeral ECDH
+ ECDH - ECDH cert or ephemeral ECDH
+
+ aECDH - ECDH cert
+ aECDSA - ECDSA cert
+ ECDSA - ECDSA cert
+
+ AECDH - anonymous ECDH
+ EECDH - non-anonymous ephemeral ECDH (equivalent to "kEECDH:-AECDH")
+
+ [Bodo Moeller]
+
*) Add additional S/MIME capabilities for AES and GOST ciphers if supported.
Use correct micalg parameters depending on digest(s) in signed message.
[Steve Henson]
implementations, between 32- and 64-bit builds without hassle.
[Andy Polyakov]
- *) Disable rogue ciphersuites:
-
- - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
- - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
- - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
-
- The latter two were purportedly from
- draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
- appear there.
-
- Other ciphersuites from draft-ietf-tls-56-bit-ciphersuites-01.txt
- remain enabled for now, but are just as unofficial, and the ID
- has long expired; these will probably disappear soon.
- [Bodo Moeller]
-
*) Move code previously exiled into file crypto/ec/ec2_smpt.c
to ec2_smpl.c, and no longer require the OPENSSL_EC_BIN_PT_COMP
macro.
Changes between 0.9.8b and 0.9.8c [xx XXX xxxx]
+ *) Disable "ECCdraft" ciphersuites (which were not part of the "ALL"
+ alias). These are now excluded from compilation by default, since
+ OpenSSL 0.9.9[-dev] should be used for TLS with elliptic curves.
+ [Bodo Moeller]
+
+ *) Disable rogue ciphersuites:
+
+ - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
+ - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
+ - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
+
+ The latter two were purportedly from
+ draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
+ appear there.
+
+ Also deactive the remaining ciphersuites from
+ draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
+ unofficial, and the ID has long expired.
+ [Bodo Moeller]
+
+ *) Fix RSA blinding Heisenbug (problems sometimes occured on
+ dual-core machines) and other potential thread-safety issues.
+ [Bodo Moeller]
+
*) Add the symmetric cipher Camellia (128-bit, 192-bit, 256-bit key
versions), which is now available for royalty-free use
(see http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html).
Changes between 0.9.7h and 0.9.8 [05 Jul 2005]
+ [NB: OpenSSL 0.9.7i and later 0.9.7 patch levels were released after
+ OpenSSL 0.9.8.]
+
*) Add libcrypto.pc and libssl.pc for those who feel they need them.
[Richard Levitte]
differing sizes.
[Richard Levitte]
+ Changes between 0.9.7j and 0.9.7k [xx XXX xxxx]
+
+ *) Disable rogue ciphersuites:
+
+ - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
+ - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
+ - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
+
+ The latter two were purportedly from
+ draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
+ appear there.
+
+ Also deactive the remaining ciphersuites from
+ draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
+ unofficial, and the ID has long expired.
+ [Bodo Moeller]
+
+ *) Fix RSA blinding Heisenbug (problems sometimes occured on
+ dual-core machines) and other potential thread-safety issues.
+ [Bodo Moeller]
+
+ Changes between 0.9.7i and 0.9.7j [04 May 2006]
+
+ *) Adapt fipsld and the build system to link against the validated FIPS
+ module in FIPS mode.
+ [Steve Henson]
+
+ *) Fixes for VC++ 2005 build under Windows.
+ [Steve Henson]
+
+ *) Add new Windows build target VC-32-GMAKE for VC++. This uses GNU make
+ from a Windows bash shell such as MSYS. It is autodetected from the
+ "config" script when run from a VC++ environment. Modify standard VC++
+ build to use fipscanister.o from the GNU make build.
+ [Steve Henson]
+
Changes between 0.9.7h and 0.9.7i [14 Oct 2005]
*) Wrapped the definition of EVP_MAX_MD_SIZE in a #ifdef OPENSSL_FIPS.
projects / openssl.git / blobdiff