https://github.com/openssl/openssl/commits/ and pick the appropriate
release branch.
- Changes between 1.1.0f and 1.1.1 [xx XXX xxxx]
+ Changes between 1.1.0h and 1.1.1 [xx XXX xxxx]
+ *) Enforce checking in the pkeyutl command line app to ensure that the input
+ length does not exceed the maximum supported digest length when performing
+ a sign, verify or verifyrecover operation.
+ [Matt Caswell]
+
+ *) SSL_MODE_AUTO_RETRY is enabled by default. Applications that use blocking
+ I/O in combination with something like select() or poll() will hang. This
+ can be turned off again using SSL_CTX_clear_mode().
+ Many applications do not properly handle non-application data records, and
+ TLS 1.3 sends more of such records. Setting SSL_MODE_AUTO_RETRY works
+ around the problems in those applications, but can also break some.
+ It's recommended to read the manpages about SSL_read(), SSL_write(),
+ SSL_get_error(), SSL_shutdown(), SSL_CTX_set_mode() and
+ SSL_CTX_set_read_ahead() again.
+ [Kurt Roeckx]
+
+ *) When unlocking a pass phrase protected PEM file or PKCS#8 container, we
+ now allow empty (zero character) pass phrases.
+ [Richard Levitte]
+
+ *) Apply blinding to binary field modular inversion and remove patent
+ pending (OPENSSL_SUN_GF2M_DIV) BN_GF2m_mod_div implementation.
+ [Billy Bob Brumley]
+
+ *) Deprecate ec2_mult.c and unify scalar multiplication code paths for
+ binary and prime elliptic curves.
+ [Billy Bob Brumley]
+
+ *) Remove ECDSA nonce padding: EC_POINT_mul is now responsible for
+ constant time fixed point multiplication.
+ [Billy Bob Brumley]
+
+ *) Revise elliptic curve scalar multiplication with timing attack
+ defenses: ec_wNAF_mul redirects to a constant time implementation
+ when computing fixed point and variable point multiplication (which
+ in OpenSSL are mostly used with secret scalars in keygen, sign,
+ ECDH derive operations).
+ [Billy Bob Brumley, Nicola Tuveri, Cesar Pereida García,
+ Sohaib ul Hassan]
+
+ *) Updated CONTRIBUTING
+ [Rich Salz]
+
+ *) Updated DRBG / RAND to request nonce and additional low entropy
+ randomness from the system.
+ [Matthias St. Pierre]
+
+ *) Updated 'openssl rehash' to use OpenSSL consistent default.
+ [Richard Levitte]
+
+ *) Moved the load of the ssl_conf module to libcrypto, which helps
+ loading engines that libssl uses before libssl is initialised.
+ [Matt Caswell]
+
+ *) Added EVP_PKEY_sign() and EVP_PKEY_verify() for EdDSA
+ [Matt Caswell]
+
+ *) Fixed X509_NAME_ENTRY_set to get multi-valued RDNs right in all cases.
+ [Ingo Schwarze, Rich Salz]
+
+ *) Added output of accepting IP address and port for 'openssl s_server'
+ [Richard Levitte]
+
+ *) Added a new API for TLSv1.3 ciphersuites:
+ SSL_CTX_set_ciphersuites()
+ SSL_set_ciphersuites()
+ [Matt Caswell]
+
+ *) Memory allocation failures consistenly add an error to the error
+ stack.
+ [Rich Salz]
+
+ *) Don't use OPENSSL_ENGINES and OPENSSL_CONF environment values
+ in libcrypto when run as setuid/setgid.
+ [Bernd Edlinger]
+
+ *) Load any config file by default when libssl is used.
+ [Matt Caswell]
+
+ *) Added new public header file <openssl/rand_drbg.h> and documentation
+ for the RAND_DRBG API. See manual page RAND_DRBG(7) for an overview.
+ [Matthias St. Pierre]
+
+ *) QNX support removed (cannot find contributors to get their approval
+ for the license change).
+ [Rich Salz]
+
+ *) TLSv1.3 replay protection for early data has been implemented. See the
+ SSL_read_early_data() man page for further details.
+ [Matt Caswell]
+
+ *) Separated TLSv1.3 ciphersuite configuration out from TLSv1.2 ciphersuite
+ configuration. TLSv1.3 ciphersuites are not compatible with TLSv1.2 and
+ below. Similarly TLSv1.2 ciphersuites are not compatible with TLSv1.3.
+ In order to avoid issues where legacy TLSv1.2 ciphersuite configuration
+ would otherwise inadvertently disable all TLSv1.3 ciphersuites the
+ configuration has been separated out. See the ciphers man page or the
+ SSL_CTX_set_ciphersuites() man page for more information.
+ [Matt Caswell]
+
+ *) On POSIX (BSD, Linux, ...) systems the ocsp(1) command running
+ in responder mode now supports the new "-multi" option, which
+ spawns the specified number of child processes to handle OCSP
+ requests. The "-timeout" option now also limits the OCSP
+ responder's patience to wait to receive the full client request
+ on a newly accepted connection. Child processes are respawned
+ as needed, and the CA index file is automatically reloaded
+ when changed. This makes it possible to run the "ocsp" responder
+ as a long-running service, making the OpenSSL CA somewhat more
+ feature-complete. In this mode, most diagnostic messages logged
+ after entering the event loop are logged via syslog(3) rather than
+ written to stderr.
+ [Viktor Dukhovni]
+
+ *) Added support for X448 and Ed448. Heavily based on original work by
+ Mike Hamburg.
+ [Matt Caswell]
+
+ *) Extend OSSL_STORE with capabilities to search and to narrow the set of
+ objects loaded. This adds the functions OSSL_STORE_expect() and
+ OSSL_STORE_find() as well as needed tools to construct searches and
+ get the search data out of them.
+ [Richard Levitte]
+
+ *) Support for TLSv1.3 added. Note that users upgrading from an earlier
+ version of OpenSSL should review their configuration settings to ensure
+ that they are still appropriate for TLSv1.3. For further information see:
+ https://www.openssl.org/blog/blog/2018/02/08/tlsv1.3/
+
+ NOTE: In this pre-release of OpenSSL a draft version of the
+ TLSv1.3 standard has been implemented. Implementations of different draft
+ versions of the standard do not inter-operate, and this version will not
+ inter-operate with an implementation of the final standard when it is
+ eventually published. Different pre-release versions may implement
+ different versions of the draft. The final version of OpenSSL 1.1.1 will
+ implement the final version of the standard.
+ TODO(TLS1.3): Remove the above note before final release
+ [Matt Caswell]
+
+ *) Grand redesign of the OpenSSL random generator
+
+ The default RAND method now utilizes an AES-CTR DRBG according to
+ NIST standard SP 800-90Ar1. The new random generator is essentially
+ a port of the default random generator from the OpenSSL FIPS 2.0
+ object module. It is a hybrid deterministic random bit generator
+ using an AES-CTR bit stream and which seeds and reseeds itself
+ automatically using trusted system entropy sources.
+
+ Some of its new features are:
+ o Support for multiple DRBG instances with seed chaining.
+ o Add a public DRBG instance for the default RAND method.
+ o Add a dedicated DRBG instance for generating long term private keys.
+ o Make the DRBG instances fork-safe.
+ o Keep all global DRBG instances on the secure heap if it is enabled.
+ o Add a DRBG instance to every SSL instance for lock free operation
+ and to increase unpredictability.
+ [Paul Dale, Benjamin Kaduk, Kurt Roeckx, Rich Salz, Matthias St. Pierre]
+
+ *) Changed Configure so it only says what it does and doesn't dump
+ so much data. Instead, ./configdata.pm should be used as a script
+ to display all sorts of configuration data.
+ [Richard Levitte]
+
+ *) Added processing of "make variables" to Configure.
+ [Richard Levitte]
+
+ *) Added SHA512/224 and SHA512/256 algorithm support.
+ [Paul Dale]
+
+ *) The last traces of Netware support, first removed in 1.1.0, have
+ now been removed.
+ [Rich Salz]
+
+ *) Get rid of Makefile.shared, and in the process, make the processing
+ of certain files (rc.obj, or the .def/.map/.opt files produced from
+ the ordinal files) more visible and hopefully easier to trace and
+ debug (or make silent).
+ [Richard Levitte]
+
+ *) Make it possible to have environment variable assignments as
+ arguments to config / Configure.
+ [Richard Levitte]
+
+ *) Add multi-prime RSA (RFC 8017) support.
+ [Paul Yang]
*) Add SM3 implemented according to GB/T 32905-2016
[ Jack Lloyd <jack.lloyd@ribose.com>,
[Rich Salz]
+ Changes between 1.1.0h and 1.1.0i [xx XXX xxxx]
+
+ *) Fixed a text canonicalisation bug in CMS
+
+ Where a CMS detached signature is used with text content the text goes
+ through a canonicalisation process first prior to signing or verifying a
+ signature. This process strips trailing space at the end of lines, converts
+ line terminators to CRLF and removes additional trailing line terminators
+ at the end of a file. A bug in the canonicalisation process meant that
+ some characters, such as form-feed, were incorrectly treated as whitespace
+ and removed. This is contrary to the specification (RFC5485). This fix
+ could mean that detached text data signed with an earlier version of
+ OpenSSL 1.1.0 may fail to verify using the fixed version, or text data
+ signed with a fixed OpenSSL may fail to verify with an earlier version of
+ OpenSSL 1.1.0. A workaround is to only verify the canonicalised text data
+ and use the "-binary" flag (for the "cms" command line application) or set
+ the SMIME_BINARY/PKCS7_BINARY/CMS_BINARY flags (if using CMS_verify()).
+ [Matt Caswell]
+
+ Changes between 1.1.0g and 1.1.0h [27 Mar 2018]
+
+ *) Constructed ASN.1 types with a recursive definition could exceed the stack
+
+ Constructed ASN.1 types with a recursive definition (such as can be found
+ in PKCS7) could eventually exceed the stack given malicious input with
+ excessive recursion. This could result in a Denial Of Service attack. There
+ are no such structures used within SSL/TLS that come from untrusted sources
+ so this is considered safe.
+
+ This issue was reported to OpenSSL on 4th January 2018 by the OSS-fuzz
+ project.
+ (CVE-2018-0739)
+ [Matt Caswell]
+
+ *) Incorrect CRYPTO_memcmp on HP-UX PA-RISC
+
+ Because of an implementation bug the PA-RISC CRYPTO_memcmp function is
+ effectively reduced to only comparing the least significant bit of each
+ byte. This allows an attacker to forge messages that would be considered as
+ authenticated in an amount of tries lower than that guaranteed by the
+ security claims of the scheme. The module can only be compiled by the
+ HP-UX assembler, so that only HP-UX PA-RISC targets are affected.
+
+ This issue was reported to OpenSSL on 2nd March 2018 by Peter Waltenberg
+ (IBM).
+ (CVE-2018-0733)
+ [Andy Polyakov]
+
+ *) Add a build target 'build_all_generated', to build all generated files
+ and only that. This can be used to prepare everything that requires
+ things like perl for a system that lacks perl and then move everything
+ to that system and do the rest of the build there.
+ [Richard Levitte]
+
+ *) Backport SSL_OP_NO_RENGOTIATION
+
+ OpenSSL 1.0.2 and below had the ability to disable renegotiation using the
+ (undocumented) SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS flag. Due to the opacity
+ changes this is no longer possible in 1.1.0. Therefore the new
+ SSL_OP_NO_RENEGOTIATION option from 1.1.1-dev has been backported to
+ 1.1.0 to provide equivalent functionality.
+
+ Note that if an application built against 1.1.0h headers (or above) is run
+ using an older version of 1.1.0 (prior to 1.1.0h) then the option will be
+ accepted but nothing will happen, i.e. renegotiation will not be prevented.
+ [Matt Caswell]
+
+ *) Removed the OS390-Unix config target. It relied on a script that doesn't
+ exist.
+ [Rich Salz]
+
+ *) rsaz_1024_mul_avx2 overflow bug on x86_64
+
+ There is an overflow bug in the AVX2 Montgomery multiplication procedure
+ used in exponentiation with 1024-bit moduli. No EC algorithms are affected.
+ Analysis suggests that attacks against RSA and DSA as a result of this
+ defect would be very difficult to perform and are not believed likely.
+ Attacks against DH1024 are considered just feasible, because most of the
+ work necessary to deduce information about a private key may be performed
+ offline. The amount of resources required for such an attack would be
+ significant. However, for an attack on TLS to be meaningful, the server
+ would have to share the DH1024 private key among multiple clients, which is
+ no longer an option since CVE-2016-0701.
+
+ This only affects processors that support the AVX2 but not ADX extensions
+ like Intel Haswell (4th generation).
+
+ This issue was reported to OpenSSL by David Benjamin (Google). The issue
+ was originally found via the OSS-Fuzz project.
+ (CVE-2017-3738)
+ [Andy Polyakov]
+
Changes between 1.1.0f and 1.1.0g [2 Nov 2017]
*) bn_sqrx8x_internal carry bug on x86_64
1. Do not use record version number > TLS 1.0 in initial client
hello: some (but not all) hanging servers will now work.
2. If we set OPENSSL_MAX_TLS1_2_CIPHER_LENGTH this will truncate
- the number of ciphers sent in the client hello. This should be
+ the number of ciphers sent in the client hello. This should be
set to an even number, such as 50, for example by passing:
-DOPENSSL_MAX_TLS1_2_CIPHER_LENGTH=50 to config or Configure.
Most broken servers should now work.
3. If all else fails setting OPENSSL_NO_TLS1_2_CLIENT will disable
- TLS 1.2 client support entirely.
+ TLS 1.2 client support entirely.
[Steve Henson]
*) Fix SEGV in Vector Permutation AES module observed in OpenSSH.
*) Extensive assembler packs updates, most notably:
- - x86[_64]: AES-NI, PCLMULQDQ, RDRAND support;
- - x86[_64]: SSSE3 support (SHA1, vector-permutation AES);
- - x86_64: bit-sliced AES implementation;
- - ARM: NEON support, contemporary platforms optimizations;
- - s390x: z196 support;
- - *: GHASH and GF(2^m) multiplication implementations;
+ - x86[_64]: AES-NI, PCLMULQDQ, RDRAND support;
+ - x86[_64]: SSSE3 support (SHA1, vector-permutation AES);
+ - x86_64: bit-sliced AES implementation;
+ - ARM: NEON support, contemporary platforms optimizations;
+ - s390x: z196 support;
+ - *: GHASH and GF(2^m) multiplication implementations;
[Andy Polyakov]
to work with OPENSSL_NO_SSL_INTERN defined.
[Steve Henson]
- *) Add SRP support.
- [Tom Wu <tjw@cs.stanford.edu> and Ben Laurie]
+ *) A long standing patch to add support for SRP from EdelWeb (Peter
+ Sylvester and Christophe Renou) was integrated.
+ [Christophe Renou <christophe.renou@edelweb.fr>, Peter Sylvester
+ <peter.sylvester@edelweb.fr>, Tom Wu <tjw@cs.stanford.edu>, and
+ Ben Laurie]
*) Add functions to copy EVP_PKEY_METHOD and retrieve flags and id.
[Steve Henson]
*) Add protection against ECDSA timing attacks as mentioned in the paper
by Billy Bob Brumley and Nicola Tuveri, see:
- http://eprint.iacr.org/2011/232.pdf
+ http://eprint.iacr.org/2011/232.pdf
[Billy Bob Brumley and Nicola Tuveri]
takes an extra flags argument for optional functionality. Currently,
the following flags are defined:
- OBJ_BSEARCH_VALUE_ON_NOMATCH
- This one gets OBJ_bsearch_ex() to return a pointer to the first
- element where the comparing function returns a negative or zero
- number.
+ OBJ_BSEARCH_VALUE_ON_NOMATCH
+ This one gets OBJ_bsearch_ex() to return a pointer to the first
+ element where the comparing function returns a negative or zero
+ number.
- OBJ_BSEARCH_FIRST_VALUE_ON_MATCH
- This one gets OBJ_bsearch_ex() to return a pointer to the first
- element where the comparing function returns zero. This is useful
- if there are more than one element where the comparing function
- returns zero.
+ OBJ_BSEARCH_FIRST_VALUE_ON_MATCH
+ This one gets OBJ_bsearch_ex() to return a pointer to the first
+ element where the comparing function returns zero. This is useful
+ if there are more than one element where the comparing function
+ returns zero.
[Richard Levitte]
*) Make it possible to create self-signed certificates with 'openssl ca'
is defined as follows (according to X.509_4thEditionDraftV6.pdf):
CertificatePair ::= SEQUENCE {
- forward [0] Certificate OPTIONAL,
- reverse [1] Certificate OPTIONAL,
+ forward [0] Certificate OPTIONAL,
+ reverse [1] Certificate OPTIONAL,
-- at least one of the pair shall be present -- }
Also implement the PEM functions to read and write certificate
build directory is the following (tested on Linux), maybe with
some local tweaks:
- # Place yourself outside of the OpenSSL source tree. In
- # this example, the environment variable OPENSSL_SOURCE
- # is assumed to contain the absolute OpenSSL source directory.
- mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
- cd objtree/"`uname -s`-`uname -r`-`uname -m`"
- (cd $OPENSSL_SOURCE; find . -type f) | while read F; do
- mkdir -p `dirname $F`
- ln -s $OPENSSL_SOURCE/$F $F
- done
+ # Place yourself outside of the OpenSSL source tree. In
+ # this example, the environment variable OPENSSL_SOURCE
+ # is assumed to contain the absolute OpenSSL source directory.
+ mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
+ cd objtree/"`uname -s`-`uname -r`-`uname -m`"
+ (cd $OPENSSL_SOURCE; find . -type f) | while read F; do
+ mkdir -p `dirname $F`
+ ln -s $OPENSSL_SOURCE/$F $F
+ done
To be absolutely sure not to disturb the source tree, a "make clean"
is a good thing. If it isn't successful, don't worry about it,
des_key_schedule ks;
- des_set_key_checked(..., &ks);
- des_ncbc_encrypt(..., &ks, ...);
+ des_set_key_checked(..., &ks);
+ des_ncbc_encrypt(..., &ks, ...);
(Note that a later change renames 'des_...' into 'DES_...'.)
[Ben Laurie]
'-pre' and '-post' switches. '-post' is only used if '-t' is
specified and the ENGINE is successfully initialised. The syntax for
the individual commands are colon-separated, for example;
- openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so
+ openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so
[Geoff]
*) New dynamic control command support for ENGINEs. ENGINEs can now
To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL
in the source file (foo.c) like this:
- OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
- OPENSSL_IMPLEMENT_GLOBAL(double,bar);
+ OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
+ OPENSSL_IMPLEMENT_GLOBAL(double,bar);
To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL
and OPENSSL_GLOBAL_REF in the header file (foo.h) like this:
- OPENSSL_DECLARE_GLOBAL(int,foo);
- #define foo OPENSSL_GLOBAL_REF(foo)
- OPENSSL_DECLARE_GLOBAL(double,bar);
- #define bar OPENSSL_GLOBAL_REF(bar)
+ OPENSSL_DECLARE_GLOBAL(int,foo);
+ #define foo OPENSSL_GLOBAL_REF(foo)
+ OPENSSL_DECLARE_GLOBAL(double,bar);
+ #define bar OPENSSL_GLOBAL_REF(bar)
The #defines are very important, and therefore so is including the
header file everywhere where the defined globals are used.
to data. This was previously part of the PKCS7 ASN1 code. This
was causing problems with OpenSSL created PKCS#12 and PKCS#7 structures.
[Steve Henson, reported by Kenneth R. Robinette
- <support@securenetterm.com>]
+ <support@securenetterm.com>]
*) Add CRYPTO_push_info() and CRYPTO_pop_info() calls to new ASN1
routines: without these tracing memory leaks is very painful.
and use ASN1_TIME_set() if the value is not V_ASN1_UTCTIME or
V_ASN1_GENERALIZEDTIME, without this it always uses GeneralizedTime.
[Steve Henson, reported by Kenneth R. Robinette
- <support@securenetterm.com>]
+ <support@securenetterm.com>]
*) Fixes to BN_to_ASN1_INTEGER when bn is zero. This would previously
result in a zero length in the ASN1_INTEGER structure which was
settings for extended allocation functions, the following
functions are provided:
- CRYPTO_set_mem_ex_functions
- CRYPTO_set_locked_mem_ex_functions
- CRYPTO_get_mem_ex_functions
- CRYPTO_get_locked_mem_ex_functions
+ CRYPTO_set_mem_ex_functions
+ CRYPTO_set_locked_mem_ex_functions
+ CRYPTO_get_mem_ex_functions
+ CRYPTO_get_locked_mem_ex_functions
These work the same way as CRYPTO_set_mem_functions and friends.
CRYPTO_get_[locked_]mem_functions now writes 0 where such an
*) Add the following functions:
- ENGINE_load_cswift()
- ENGINE_load_chil()
- ENGINE_load_atalla()
- ENGINE_load_nuron()
- ENGINE_load_builtin_engines()
+ ENGINE_load_cswift()
+ ENGINE_load_chil()
+ ENGINE_load_atalla()
+ ENGINE_load_nuron()
+ ENGINE_load_builtin_engines()
That way, an application can itself choose if external engines that
are built-in in OpenSSL shall ever be used or not. The benefit is
*) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
and get fix the header length calculation.
[Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
- Alon Kantor <alonk@checkpoint.com> (and others),
- Steve Henson]
+
Alon Kantor <alonk@checkpoint.com> (and others),
+ Steve Henson]
*) Use proper error handling instead of 'assertions' in buffer
overflow checks added in 0.9.6e. This prevents DoS (the
*) Added BIO_vprintf() and BIO_vsnprintf().
[Richard Levitte]
- *) Added more prefixes to parse for in the the strings written
+ *) Added more prefixes to parse for in the strings written
through a logging bio, to cover all the levels that are available
through syslog. The prefixes are now:
- PANIC, EMERG, EMR => LOG_EMERG
- ALERT, ALR => LOG_ALERT
- CRIT, CRI => LOG_CRIT
- ERROR, ERR => LOG_ERR
- WARNING, WARN, WAR => LOG_WARNING
- NOTICE, NOTE, NOT => LOG_NOTICE
- INFO, INF => LOG_INFO
- DEBUG, DBG => LOG_DEBUG
+ PANIC, EMERG, EMR => LOG_EMERG
+ ALERT, ALR => LOG_ALERT
+ CRIT, CRI => LOG_CRIT
+ ERROR, ERR => LOG_ERR
+ WARNING, WARN, WAR => LOG_WARNING
+ NOTICE, NOTE, NOT => LOG_NOTICE
+ INFO, INF => LOG_INFO
+ DEBUG, DBG => LOG_DEBUG
and as before, if none of those prefixes are present at the
beginning of the string, LOG_ERR is chosen.
On Win32, the LOG_* levels are mapped according to this:
- LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE
- LOG_WARNING => EVENTLOG_WARNING_TYPE
- LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE
+ LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE
+ LOG_WARNING => EVENTLOG_WARNING_TYPE
+ LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE
[Richard Levitte]
With these changes, a new set of functions and macros have appeared:
- CRYPTO_set_mem_debug_functions() [F]
+ CRYPTO_set_mem_debug_functions() [F]
CRYPTO_get_mem_debug_functions() [F]
- CRYPTO_dbg_set_options() [F]
+ CRYPTO_dbg_set_options() [F]
CRYPTO_dbg_get_options() [F]
CRYPTO_malloc_debug_init() [M]
delete an unused file.
[Ulf Möller]
- *) Add support for the the free Netwide assembler (NASM) under Win32,
+ *) Add support for the free Netwide assembler (NASM) under Win32,
since not many people have MASM (ml) and it can be hard to obtain.
This is currently experimental but it seems to work OK and pass all
the tests. Check out INSTALL.W32 for info.
projects / openssl.git / blobdiff