Changes between 1.0.1 and 1.1.0 [xx XXX xxxx]
+ *) Add support for canonical generation of DSA parameter 'g'. See
+ FIPS 186-3 A.2.3.
+
+ *) Add support for HMAC DRBG from SP800-90. Update algorithm and POST
+ to handle HMAC cases.
+ [Steve Henson]
+
+ *) Add functions FIPS_module_version() and FIPS_module_version_text()
+ to return numberical and string versions of the FIPS module number.
+ [Steve Henson]
+
+ *) Rename FIPS_mode_set and FIPS_mode to FIPS_module_mode_set and
+ FIPS_module_mode. FIPS_mode and FIPS_mode_set will be implmeneted
+ outside the validated module in the FIPS capable OpenSSL.
+ [Steve Henson]
+
+ *) Minor change to DRBG entropy callback semantics. In some cases
+ there is no mutiple of the block length between min_len and
+ max_len. Allow the callback to return more than max_len bytes
+ of entropy but discard any extra: it is the callback's responsibility
+ to ensure that the extra data discarded does not impact the
+ requested amount of entropy.
+ [Steve Henson]
+
+ *) Add PRNG security strength checks to RSA, DSA and ECDSA using
+ information in FIPS186-3, SP800-57 and SP800-131A.
+ [Steve Henson]
+
+ *) CCM support via EVP. Interface is very similar to GCM case except we
+ must supply all data in one chunk (i.e. no update, final) and the
+ message length must be supplied if AAD is used. Add algorithm test
+ support.
+ [Steve Henson]
+
+ *) Initial version of POST overhaul. Add POST callback to allow the status
+ of POST to be monitored and/or failures induced. Modify fips_test_suite
+ to use callback. Always run all selftests even if one fails.
+ [Steve Henson]
+
+ *) XTS support including algorithm test driver in the fips_gcmtest program.
+ Note: this does increase the maximum key length from 32 to 64 bytes but
+ there should be no binary compatibility issues as existing applications
+ will never use XTS mode.
+ [Steve Henson]
+
+ *) Extensive reorganisation of FIPS PRNG behaviour. Remove all dependencies
+ to OpenSSL RAND code and replace with a tiny FIPS RAND API which also
+ performs algorithm blocking for unapproved PRNG types. Also do not
+ set PRNG type in FIPS_mode_set(): leave this to the application.
+ Add default OpenSSL DRBG handling: sets up FIPS PRNG and seeds with
+ the standard OpenSSL PRNG: set additional data to a date time vector.
+ [Steve Henson]
+
+ *) Rename old X9.31 PRNG functions of the form FIPS_rand* to FIPS_x931*.
+ This shouldn't present any incompatibility problems because applications
+ shouldn't be using these directly and any that are will need to rethink
+ anyway as the X9.31 PRNG is now deprecated by FIPS 140-2
+ [Steve Henson]
+
+ *) Extensive self tests and health checking required by SP800-90 DRBG.
+ Remove strength parameter from FIPS_drbg_instantiate and always
+ instantiate at maximum supported strength.
+ [Steve Henson]
+
+ *) Add ECDH code to fips module and fips_ecdhvs for primitives only testing.
+ [Steve Henson]
+
+ *) New algorithm test program fips_dhvs to handle DH primitives only testing.
+ [Steve Henson]
+
+ *) New function DH_compute_key_padded() to compute a DH key and pad with
+ leading zeroes if needed: this complies with SP800-56A et al.
+ [Steve Henson]
+
+ *) Initial implementation of SP800-90 DRBGs for Hash and CTR. Not used by
+ anything, incomplete, subject to change and largely untested at present.
+ [Steve Henson]
+
+ *) Modify fipscanisteronly build option to only build the necessary object
+ files by filtering FIPS_EX_OBJ through a perl script in crypto/Makefile.
+ [Steve Henson]
+
*) Add experimental option FIPSSYMS to give all symbols in
fipscanister.o and FIPS or fips prefix. This will avoid
conflicts with future versions of OpenSSL. Add perl script
whose return value is often ignored.
[Steve Henson]
- Changes between 1.0.0d and 1.0.1 [xx XXX xxxx]
+ Changes between 1.0.0e and 1.0.1 [xx XXX xxxx]
+
+ *) Session-handling fixes:
+ - Fix handling of connections that are resuming with a session ID,
+ but also support Session Tickets.
+ - Fix a bug that suppressed issuing of a new ticket if the client
+ presented a ticket with an expired session.
+ - Try to set the ticket lifetime hint to something reasonable.
+ - Make tickets shorter by excluding irrelevant information.
+ - On the client side, don't ignore renewed tickets.
+ [Adam Langley, Bodo Moeller (Google)]
+
+ *) Fix PSK session representation.
+ [Bodo Moeller]
+
+ *) Add RC4-MD5 and AESNI-SHA1 "stitched" implementations.
+
+ This work was sponsored by Intel.
+ [Andy Polyakov]
+
+ *) Add GCM support to TLS library. Some custom code is needed to split
+ the IV between the fixed (from PRF) and explicit (from TLS record)
+ portions. This adds all GCM ciphersuites supported by RFC5288 and
+ RFC5289. Generalise some AES* cipherstrings to inlclude GCM and
+ add a special AESGCM string for GCM only.
+ [Steve Henson]
+
+ *) Expand range of ctrls for AES GCM. Permit setting invocation
+ field on decrypt and retrieval of invocation field only on encrypt.
+ [Steve Henson]
+
+ *) Add HMAC ECC ciphersuites from RFC5289. Include SHA384 PRF support.
+ As required by RFC5289 these ciphersuites cannot be used if for
+ versions of TLS earlier than 1.2.
+ [Steve Henson]
+
+ *) For FIPS capable OpenSSL interpret a NULL default public key method
+ as unset and return the appopriate default but do *not* set the default.
+ This means we can return the appopriate method in applications that
+ swicth between FIPS and non-FIPS modes.
+ [Steve Henson]
+
+ *) Redirect HMAC and CMAC operations to FIPS module in FIPS mode. If an
+ ENGINE is used then we cannot handle that in the FIPS module so we
+ keep original code iff non-FIPS operations are allowed.
+ [Steve Henson]
+
+ *) Add -attime option to openssl verify.
+ [Peter Eckersley <pde@eff.org> and Ben Laurie]
+
+ *) Redirect DSA and DH operations to FIPS module in FIPS mode.
+ [Steve Henson]
+
+ *) Redirect ECDSA and ECDH operations to FIPS module in FIPS mode. Also use
+ FIPS EC methods unconditionally for now.
+ [Steve Henson]
+
+ *) New build option no-ec2m to disable characteristic 2 code.
+ [Steve Henson]
+
+ *) Backport libcrypto audit of return value checking from 1.1.0-dev; not
+ all cases can be covered as some introduce binary incompatibilities.
+ [Steve Henson]
+
+ *) Redirect RSA operations to FIPS module including keygen,
+ encrypt, decrypt, sign and verify. Block use of non FIPS RSA methods.
+ [Steve Henson]
+
+ *) Add similar low level API blocking to ciphers.
+ [Steve Henson]
+
+ *) Low level digest APIs are not approved in FIPS mode: any attempt
+ to use these will cause a fatal error. Applications that *really* want
+ to use them can use the private_* version instead.
+ [Steve Henson]
+
+ *) Redirect cipher operations to FIPS module for FIPS builds.
+ [Steve Henson]
+
+ *) Redirect digest operations to FIPS module for FIPS builds.
+ [Steve Henson]
+
+ *) Update build system to add "fips" flag which will link in fipscanister.o
+ for static and shared library builds embedding a signature if needed.
+ [Steve Henson]
+
+ *) Output TLS supported curves in preference order instead of numerical
+ order. This is currently hardcoded for the highest order curves first.
+ This should be configurable so applications can judge speed vs strength.
+ [Steve Henson]
+
+ *) Add TLS v1.2 server support for client authentication.
+ [Steve Henson]
+
+ *) Add support for FIPS mode in ssl library: disable SSLv3, non-FIPS ciphers
+ and enable MD5.
+ [Steve Henson]
+
+ *) Functions FIPS_mode_set() and FIPS_mode() which call the underlying
+ FIPS modules versions.
+ [Steve Henson]
+
+ *) Add TLS v1.2 client side support for client authentication. Keep cache
+ of handshake records longer as we don't know the hash algorithm to use
+ until after the certificate request message is received.
+ [Steve Henson]
+
+ *) Initial TLS v1.2 client support. Add a default signature algorithms
+ extension including all the algorithms we support. Parse new signature
+ format in client key exchange. Relax some ECC signing restrictions for
+ TLS v1.2 as indicated in RFC5246.
+ [Steve Henson]
+
+ *) Add server support for TLS v1.2 signature algorithms extension. Switch
+ to new signature format when needed using client digest preference.
+ All server ciphersuites should now work correctly in TLS v1.2. No client
+ support yet and no support for client certificates.
+ [Steve Henson]
+
+ *) Initial TLS v1.2 support. Add new SHA256 digest to ssl code, switch
+ to SHA256 for PRF when using TLS v1.2 and later. Add new SHA256 based
+ ciphersuites. At present only RSA key exchange ciphersuites work with
+ TLS v1.2. Add new option for TLS v1.2 replacing the old and obsolete
+ SSL_OP_PKCS1_CHECK flags with SSL_OP_NO_TLSv1_2. New TLSv1.2 methods
+ and version checking.
+ [Steve Henson]
+
+ *) New option OPENSSL_NO_SSL_INTERN. If an application can be compiled
+ with this defined it will not be affected by any changes to ssl internal
+ structures. Add several utility functions to allow openssl application
+ to work with OPENSSL_NO_SSL_INTERN defined.
+ [Steve Henson]
+
+ *) Add SRP support.
+ [Tom Wu <tjw@cs.stanford.edu> and Ben Laurie]
*) Add functions to copy EVP_PKEY_METHOD and retrieve flags and id.
[Steve Henson]
Add command line options to s_client/s_server.
[Steve Henson]
+ Changes between 1.0.0d and 1.0.0e [xx XXX xxxx]
+
+ *) Fix bug where CRLs with nextUpdate in the past are sometimes accepted
+ by initialising X509_STORE_CTX properly. (CVE-2011-3207)
+ [Kaspar Brand <ossl@velox.ch>]
+
+ *) Fix SSL memory handling for (EC)DH ciphersuites, in particular
+ for multi-threaded use of ECDH. (CVE-2011-3210)
+ [Adam Langley (Google)]
+
+ *) Fix x509_name_ex_d2i memory leak on bad inputs.
+ [Bodo Moeller]
+
+ *) Remove hard coded ecdsaWithSHA1 signature tests in ssl code and check
+ signature public key algorithm by using OID xref utilities instead.
+ Before this you could only use some ECC ciphersuites with SHA1 only.
+ [Steve Henson]
+
+ *) Add protection against ECDSA timing attacks as mentioned in the paper
+ by Billy Bob Brumley and Nicola Tuveri, see:
+
+ http://eprint.iacr.org/2011/232.pdf
+
+ [Billy Bob Brumley and Nicola Tuveri]
+
Changes between 1.0.0c and 1.0.0d [8 Feb 2011]
*) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
*) Change 'Configure' script to enable Camellia by default.
[NTT]
+ Changes between 0.9.8r and 0.9.8s [xx XXX xxxx]
+
+ *) Fix SSL memory handling for (EC)DH ciphersuites, in particular
+ for multi-threaded use of ECDH.
+ [Adam Langley (Google)]
+
+ *) Fix x509_name_ex_d2i memory leak on bad inputs.
+ [Bodo Moeller]
+
+ *) Add protection against ECDSA timing attacks as mentioned in the paper
+ by Billy Bob Brumley and Nicola Tuveri, see:
+
+ http://eprint.iacr.org/2011/232.pdf
+
+ [Billy Bob Brumley and Nicola Tuveri]
+
Changes between 0.9.8q and 0.9.8r [8 Feb 2011]
*) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
projects / openssl.git / blobdiff