2 # Copyright 2015-2021 The OpenSSL Project Authors. All Rights Reserved.
4 # Licensed under the Apache License 2.0 (the "License"). You may not use
5 # this file except in compliance with the License. You can obtain a copy
6 # in the file LICENSE in the source distribution or at
7 # https://www.openssl.org/source/license.html
14 use File::Compare qw/compare_text/;
16 use OpenSSL::Test qw/:DEFAULT srctop_dir srctop_file bldtop_file bldtop_dir/;
17 use OpenSSL::Test::Utils qw/disabled alldisabled available_protocols/;
20 setup("test_ssl_new");
23 use lib srctop_dir('Configurations');
24 use lib bldtop_dir('.');
26 my $no_fips = disabled('fips') || ($ENV{NO_FIPS} // 0);
28 $ENV{TEST_CERTS_DIR} = srctop_dir("test", "certs");
30 my @conf_srcs = glob(srctop_file("test", "ssl-tests", "*.cnf.in"));
31 map { s/;.*// } @conf_srcs if $^O eq "VMS";
32 my @conf_files = map { basename($_, ".in") } @conf_srcs;
33 map { s/\^// } @conf_files if $^O eq "VMS";
35 # We hard-code the number of tests to double-check that the globbing above
36 # finds all files as expected.
39 # Some test results depend on the configuration of enabled protocols. We only
40 # verify generated sources in the default configuration.
41 my $is_default_tls = (disabled("ssl3") && !disabled("tls1") &&
42 !disabled("tls1_1") && !disabled("tls1_2") &&
43 !disabled("tls1_3") && (!disabled("ec") || !disabled("dh")));
45 my $is_default_dtls = (!disabled("dtls1") && !disabled("dtls1_2"));
47 my @all_pre_tls1_3 = ("ssl3", "tls1", "tls1_1", "tls1_2");
48 my $no_tls = alldisabled(available_protocols("tls"));
49 my $no_tls_below1_3 = $no_tls || (disabled("tls1_2") && !disabled("tls1_3"));
50 if (!$no_tls && $no_tls_below1_3 && disabled("ec") && disabled("dh")) {
53 my $no_pre_tls1_3 = alldisabled(@all_pre_tls1_3);
54 my $no_dtls = alldisabled(available_protocols("dtls"));
55 my $no_npn = disabled("nextprotoneg");
56 my $no_ct = disabled("ct");
57 my $no_ec = disabled("ec");
58 my $no_dh = disabled("dh");
59 my $no_dsa = disabled("dsa");
60 my $no_ec2m = disabled("ec2m");
61 my $no_ocsp = disabled("ocsp");
63 # Add your test here if the test conf.in generates test cases and/or
64 # expectations dynamically based on the OpenSSL compile-time config.
65 my %conf_dependent_tests = (
66 "02-protocol-version.cnf" => !$is_default_tls,
67 "04-client_auth.cnf" => !$is_default_tls || !$is_default_dtls
69 "05-sni.cnf" => disabled("tls1_1"),
70 "07-dtls-protocol-version.cnf" => !$is_default_dtls || !disabled("sctp"),
71 "10-resumption.cnf" => !$is_default_tls || $no_ec,
72 "11-dtls_resumption.cnf" => !$is_default_dtls || !disabled("sctp"),
73 "16-dtls-certstatus.cnf" => !$is_default_dtls || !disabled("sctp"),
74 "17-renegotiate.cnf" => disabled("tls1_2"),
75 "18-dtls-renegotiate.cnf" => disabled("dtls1_2") || !disabled("sctp"),
76 "19-mac-then-encrypt.cnf" => !$is_default_tls,
77 "20-cert-select.cnf" => !$is_default_tls || $no_dh || $no_dsa,
78 "22-compression.cnf" => !$is_default_tls,
79 "25-cipher.cnf" => disabled("poly1305") || disabled("chacha"),
80 "27-ticket-appdata.cnf" => !$is_default_tls,
81 "28-seclevel.cnf" => disabled("tls1_2") || $no_ec,
82 "30-extended-master-secret.cnf" => disabled("tls1_2"),
85 # Add your test here if it should be skipped for some compile-time
86 # configurations. Default is $no_tls but some tests have different skip
89 "06-sni-ticket.cnf" => $no_tls_below1_3,
90 "07-dtls-protocol-version.cnf" => $no_dtls,
91 "08-npn.cnf" => (disabled("tls1") && disabled("tls1_1")
92 && disabled("tls1_2")) || $no_npn,
93 "10-resumption.cnf" => disabled("tls1_1") || disabled("tls1_2"),
94 "11-dtls_resumption.cnf" => disabled("dtls1") || disabled("dtls1_2"),
95 "12-ct.cnf" => $no_tls || $no_ct || $no_ec,
96 # We could run some of these tests without TLS 1.2 if we had a per-test
97 # disable instruction but that's a bizarre configuration not worth
99 # TODO(TLS 1.3): We should review this once we have TLS 1.3.
100 "13-fragmentation.cnf" => disabled("tls1_2"),
101 "14-curves.cnf" => disabled("tls1_2") || disabled("tls1_3")
102 || $no_ec || $no_ec2m,
103 "15-certstatus.cnf" => $no_tls || $no_ocsp,
104 "16-dtls-certstatus.cnf" => $no_dtls || $no_ocsp,
105 "17-renegotiate.cnf" => $no_tls_below1_3,
106 "18-dtls-renegotiate.cnf" => $no_dtls,
107 "19-mac-then-encrypt.cnf" => $no_pre_tls1_3,
108 "20-cert-select.cnf" => disabled("tls1_2") || $no_ec,
109 "21-key-update.cnf" => disabled("tls1_3") || ($no_ec && $no_dh),
110 "22-compression.cnf" => disabled("zlib") || $no_tls,
111 "23-srp.cnf" => (disabled("tls1") && disabled ("tls1_1")
112 && disabled("tls1_2")) || disabled("srp"),
113 "24-padding.cnf" => disabled("tls1_3") || ($no_ec && $no_dh),
114 "25-cipher.cnf" => disabled("ec") || disabled("tls1_2"),
115 "26-tls13_client_auth.cnf" => disabled("tls1_3") || ($no_ec && $no_dh),
116 "29-dtls-sctp-label-bug.cnf" => disabled("sctp") || disabled("sock"),
119 foreach my $conf (@conf_files) {
120 subtest "Test configuration $conf" => sub {
121 plan tests => 6 + ($no_fips ? 0 : 3);
123 $conf_dependent_tests{$conf} || $^O eq "VMS" ? 0 : 1,
124 defined($skip{$conf}) ? $skip{$conf} : $no_tls,
128 defined($skip{$conf}) ? $skip{$conf} : $no_tls,
132 defined($skip{$conf}) ? $skip{$conf} : $no_tls,
133 "fips") unless $no_fips;
138 my ($conf, $check_source, $skip, $provider) = @_;
140 my $conf_file = srctop_file("test", "ssl-tests", $conf);
141 my $input_file = $conf_file . ".in";
142 my $output_file = $conf . "." . $provider;
146 # "Test" 1. Generate the source.
147 skip 'failure', 2 unless
148 ok(run(perltest(["generate_ssl_tests.pl", $input_file, $provider],
149 interpreter_args => [ "-I", srctop_dir("util", "perl")],
150 stdout => $output_file)),
151 "Getting output from generate_ssl_tests.pl.");
154 # Test 2. Compare against existing output in test/ssl-tests/
155 skip "Skipping generated source test for $conf", 1
158 $run_test = is(cmp_text($output_file, $conf_file), 0,
159 "Comparing generated $output_file with $conf_file.");
162 # Test 3. Run the test.
163 skip "No tests available; skipping tests", 1 if $skip;
164 skip "Stale sources; skipping tests", 1 if !$run_test;
166 if ($provider eq "fips") {
167 ok(run(test(["ssl_test", $output_file, $provider,
168 srctop_file("test", "fips-and-base.cnf")])),
169 "running ssl_test $conf");
171 ok(run(test(["ssl_test", $output_file, $provider])),
172 "running ssl_test $conf");
178 return compare_text(@_, sub {
181 return $_[0] ne $_[1];