GH787: Fix ALPN
[openssl.git] / test / recipes / 80-test_ssl.t
1 #! /usr/bin/perl
2
3 use strict;
4 use warnings;
5
6 use POSIX;
7 use File::Spec;
8 use File::Copy;
9 use OpenSSL::Test qw/:DEFAULT with bldtop_file srctop_file cmdstr/;
10 use OpenSSL::Test::Utils;
11
12 setup("test_ssl");
13
14 my ($no_rsa, $no_dsa, $no_dh, $no_ec, $no_srp, $no_psk,
15     $no_ssl3, $no_tls1, $no_tls1_1, $no_tls1_2,
16     $no_dtls, $no_dtls1, $no_dtls1_2, $no_ct) =
17     anydisabled qw/rsa dsa dh ec srp psk
18                    ssl3 tls1 tls1_1 tls1_2
19                    dtls dtls1 dtls1_2 ct/;
20 my $no_anytls = alldisabled(available_protocols("tls"));
21 my $no_anydtls = alldisabled(available_protocols("dtls"));
22
23 plan skip_all => "No SSL/TLS/DTLS protocol is support by this OpenSSL build"
24     if $no_anytls && $no_anydtls;
25
26 my $digest = "-sha1";
27 my @reqcmd = ("openssl", "req");
28 my @x509cmd = ("openssl", "x509", $digest);
29 my @verifycmd = ("openssl", "verify");
30 my $dummycnf = srctop_file("apps", "openssl.cnf");
31
32 my $CAkey = "keyCA.ss";
33 my $CAcert="certCA.ss";
34 my $CAserial="certCA.srl";
35 my $CAreq="reqCA.ss";
36 my $CAconf=srctop_file("test","CAss.cnf");
37 my $CAreq2="req2CA.ss"; # temp
38
39 my $Uconf=srctop_file("test","Uss.cnf");
40 my $Ukey="keyU.ss";
41 my $Ureq="reqU.ss";
42 my $Ucert="certU.ss";
43
44 my $Dkey="keyD.ss";
45 my $Dreq="reqD.ss";
46 my $Dcert="certD.ss";
47
48 my $Ekey="keyE.ss";
49 my $Ereq="reqE.ss";
50 my $Ecert="certE.ss";
51
52 my $P1conf=srctop_file("test","P1ss.cnf");
53 my $P1key="keyP1.ss";
54 my $P1req="reqP1.ss";
55 my $P1cert="certP1.ss";
56 my $P1intermediate="tmp_intP1.ss";
57
58 my $P2conf=srctop_file("test","P2ss.cnf");
59 my $P2key="keyP2.ss";
60 my $P2req="reqP2.ss";
61 my $P2cert="certP2.ss";
62 my $P2intermediate="tmp_intP2.ss";
63
64 plan tests =>
65     1                           # For testss
66     + 1                         # For ssltest -test_cipherlist
67     + 13                        # For the first testssl
68     + 16                        # For the first testsslproxy
69     + 16                        # For the second testsslproxy
70     ;
71
72 subtest 'test_ss' => sub {
73     if (testss()) {
74         open OUT, ">", "intP1.ss";
75         copy($CAcert, \*OUT); copy($Ucert, \*OUT);
76         close OUT;
77
78         open OUT, ">", "intP2.ss";
79         copy($CAcert, \*OUT); copy($Ucert, \*OUT); copy($P1cert, \*OUT);
80         close OUT;
81     }
82 };
83
84 my $check = ok(run(test(["ssltest","-test_cipherlist"])), "running ssltest");
85
86   SKIP: {
87       skip "ssltest ended with error, skipping the rest", 3
88           if !$check;
89
90       note('test_ssl -- key U');
91       testssl("keyU.ss", $Ucert, $CAcert);
92
93       note('test_ssl -- key P1');
94       testsslproxy("keyP1.ss", "certP1.ss", "intP1.ss", "AB");
95
96       note('test_ssl -- key P2');
97       testsslproxy("keyP2.ss", "certP2.ss", "intP2.ss", "BC");
98     }
99
100 # -----------
101 # subtest functions
102 sub testss {
103     open RND, ">>", ".rnd";
104     print RND "string to make the random number generator think it has entropy";
105     close RND;
106
107     my @req_dsa = ("-newkey",
108                    "dsa:".srctop_file("apps", "dsa1024.pem"));
109     my @req_new;
110     if ($no_rsa) {
111         @req_new = @req_dsa;
112     } else {
113         @req_new = ("-new");
114     }
115
116     plan tests => 17;
117
118   SKIP: {
119       skip 'failure', 16 unless
120           ok(run(app([@reqcmd, "-config", $CAconf,
121                       "-out", $CAreq, "-keyout", $CAkey,
122                       @req_new])),
123              'make cert request');
124
125       skip 'failure', 15 unless
126           ok(run(app([@x509cmd, "-CAcreateserial", "-in", $CAreq, "-days", "30",
127                       "-req", "-out", $CAcert, "-signkey", $CAkey,
128                       "-extfile", $CAconf, "-extensions", "v3_ca"],
129                      stdout => "err.ss")),
130              'convert request into self-signed cert');
131
132       skip 'failure', 14 unless
133           ok(run(app([@x509cmd, "-in", $CAcert,
134                       "-x509toreq", "-signkey", $CAkey, "-out", $CAreq2],
135                      stdout => "err.ss")),
136              'convert cert into a cert request');
137
138       skip 'failure', 13 unless
139           ok(run(app([@reqcmd, "-config", $dummycnf,
140                       "-verify", "-in", $CAreq, "-noout"])),
141              'verify request 1');
142
143
144       skip 'failure', 12 unless
145           ok(run(app([@reqcmd, "-config", $dummycnf,
146                       "-verify", "-in", $CAreq2, "-noout"])),
147              'verify request 2');
148
149       skip 'failure', 11 unless
150           ok(run(app([@verifycmd, "-CAfile", $CAcert, $CAcert])),
151              'verify signature');
152
153       skip 'failure', 10 unless
154           ok(run(app([@reqcmd, "-config", $Uconf,
155                       "-out", $Ureq, "-keyout", $Ukey, @req_new],
156                      stdout => "err.ss")),
157              'make a user cert request');
158
159       skip 'failure', 9 unless
160           ok(run(app([@x509cmd, "-CAcreateserial", "-in", $Ureq, "-days", "30",
161                       "-req", "-out", $Ucert,
162                       "-CA", $CAcert, "-CAkey", $CAkey, "-CAserial", $CAserial,
163                       "-extfile", $Uconf, "-extensions", "v3_ee"],
164                      stdout => "err.ss"))
165              && run(app([@verifycmd, "-CAfile", $CAcert, $Ucert])),
166              'sign user cert request');
167
168       skip 'failure', 8 unless
169           ok(run(app([@x509cmd,
170                       "-subject", "-issuer", "-startdate", "-enddate",
171                       "-noout", "-in", $Ucert])),
172              'Certificate details');
173
174       skip 'failure', 7 unless
175           subtest 'DSA certificate creation' => sub {
176               plan skip_all => "skipping DSA certificate creation"
177                   if $no_dsa;
178
179               plan tests => 4;
180
181             SKIP: {
182                 $ENV{CN2} = "DSA Certificate";
183                 skip 'failure', 3 unless
184                     ok(run(app([@reqcmd, "-config", $Uconf,
185                                 "-out", $Dreq, "-keyout", $Dkey,
186                                 @req_dsa],
187                                stdout => "err.ss")),
188                        "make a DSA user cert request");
189                 skip 'failure', 2 unless
190                     ok(run(app([@x509cmd, "-CAcreateserial",
191                                 "-in", $Dreq,
192                                 "-days", "30",
193                                 "-req",
194                                 "-out", $Dcert,
195                                 "-CA", $CAcert, "-CAkey", $CAkey,
196                                 "-CAserial", $CAserial,
197                                 "-extfile", $Uconf,
198                                 "-extensions", "v3_ee_dsa"],
199                                stdout => "err.ss")),
200                        "sign DSA user cert request");
201                 skip 'failure', 1 unless
202                     ok(run(app([@verifycmd, "-CAfile", $CAcert, $Dcert])),
203                        "verify DSA user cert");
204                 skip 'failure', 0 unless
205                     ok(run(app([@x509cmd,
206                                 "-subject", "-issuer",
207                                 "-startdate", "-enddate", "-noout",
208                                 "-in", $Dcert])),
209                        "DSA Certificate details");
210               }
211       };
212
213       skip 'failure', 6 unless
214           subtest 'ECDSA/ECDH certificate creation' => sub {
215               plan skip_all => "skipping ECDSA/ECDH certificate creation"
216                   if $no_ec;
217
218               plan tests => 5;
219
220             SKIP: {
221                 $ENV{CN2} = "ECDSA Certificate";
222                 skip 'failure', 4 unless
223                     ok(run(app(["openssl", "ecparam", "-name", "P-256",
224                                 "-out", "ecp.ss"])),
225                        "make EC parameters");
226                 skip 'failure', 3 unless
227                     ok(run(app([@reqcmd, "-config", $Uconf,
228                                 "-out", $Ereq, "-keyout", $Ekey,
229                                 "-newkey", "ec:ecp.ss"],
230                                stdout => "err.ss")),
231                        "make a ECDSA/ECDH user cert request");
232                 skip 'failure', 2 unless
233                     ok(run(app([@x509cmd, "-CAcreateserial",
234                                 "-in", $Ereq,
235                                 "-days", "30",
236                                 "-req",
237                                 "-out", $Ecert,
238                                 "-CA", $CAcert, "-CAkey", $CAkey,
239                                 "-CAserial", $CAserial,
240                                 "-extfile", $Uconf,
241                                 "-extensions", "v3_ee_ec"],
242                                stdout => "err.ss")),
243                        "sign ECDSA/ECDH user cert request");
244                 skip 'failure', 1 unless
245                     ok(run(app([@verifycmd, "-CAfile", $CAcert, $Ecert])),
246                        "verify ECDSA/ECDH user cert");
247                 skip 'failure', 0 unless
248                     ok(run(app([@x509cmd,
249                                 "-subject", "-issuer",
250                                 "-startdate", "-enddate", "-noout",
251                                 "-in", $Ecert])),
252                        "ECDSA Certificate details");
253               }
254       };
255
256       skip 'failure', 5 unless
257           ok(run(app([@reqcmd, "-config", $P1conf,
258                       "-out", $P1req, "-keyout", $P1key, @req_new],
259                      stdout => "err.ss")),
260              'make a proxy cert request');
261
262
263       skip 'failure', 4 unless
264           ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P1req, "-days", "30",
265                       "-req", "-out", $P1cert,
266                       "-CA", $Ucert, "-CAkey", $Ukey,
267                       "-extfile", $P1conf, "-extensions", "v3_proxy"],
268                      stdout => "err.ss")),
269              'sign proxy with user cert');
270
271       copy($Ucert, $P1intermediate);
272       run(app([@verifycmd, "-CAfile", $CAcert,
273                "-untrusted", $P1intermediate, $P1cert]));
274       ok(run(app([@x509cmd,
275                   "-subject", "-issuer", "-startdate", "-enddate",
276                   "-noout", "-in", $P1cert])),
277          'Certificate details');
278
279       skip 'failure', 2 unless
280           ok(run(app([@reqcmd, "-config", $P2conf,
281                       "-out", $P2req, "-keyout", $P2key,
282                       @req_new],
283                      stdout => "err.ss")),
284              'make another proxy cert request');
285
286
287       skip 'failure', 1 unless
288           ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P2req, "-days", "30",
289                       "-req", "-out", $P2cert,
290                       "-CA", $P1cert, "-CAkey", $P1key,
291                       "-extfile", $P2conf, "-extensions", "v3_proxy"],
292                      stdout => "err.ss")),
293              'sign second proxy cert request with the first proxy cert');
294
295
296       open OUT, ">", $P2intermediate;
297       copy($Ucert, \*OUT); copy($P1cert, \*OUT);
298       close OUT;
299       run(app([@verifycmd, "-CAfile", $CAcert,
300                "-untrusted", $P2intermediate, $P2cert]));
301       ok(run(app([@x509cmd,
302                   "-subject", "-issuer", "-startdate", "-enddate",
303                   "-noout", "-in", $P2cert])),
304          'Certificate details');
305     }
306 }
307
308 sub testssl {
309     my $key = shift || bldtop_file("apps","server.pem");
310     my $cert = shift || bldtop_file("apps","server.pem");
311     my $CAtmp = shift;
312     my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", bldtop_dir("certs"));
313     my @extra = @_;
314
315     my @ssltest = ("ssltest",
316                    "-s_key", $key, "-s_cert", $cert,
317                    "-c_key", $key, "-c_cert", $cert);
318
319     my $serverinfo = srctop_file("test","serverinfo.pem");
320
321     my $dsa_cert = 0;
322     if (grep /DSA Public Key/, run(app(["openssl", "x509", "-in", $cert,
323                                         "-text", "-noout"]), capture => 1)) {
324         $dsa_cert = 1;
325     }
326
327
328     # plan tests => 11;
329
330     subtest 'standard SSL tests' => sub {
331         ######################################################################
332         plan tests => 29;
333
334       SKIP: {
335           skip "SSLv3 is not supported by this OpenSSL build", 4
336               if disabled("ssl3");
337
338           ok(run(test([@ssltest, "-ssl3", @extra])),
339              'test sslv3');
340           ok(run(test([@ssltest, "-ssl3", "-server_auth", @CA, @extra])),
341              'test sslv3 with server authentication');
342           ok(run(test([@ssltest, "-ssl3", "-client_auth", @CA, @extra])),
343              'test sslv3 with client authentication');
344           ok(run(test([@ssltest, "-ssl3", "-server_auth", "-client_auth", @CA, @extra])),
345              'test sslv3 with both server and client authentication');
346         }
347
348       SKIP: {
349           skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 4
350               if $no_anytls;
351
352           ok(run(test([@ssltest, @extra])),
353              'test sslv2/sslv3');
354           ok(run(test([@ssltest, "-server_auth", @CA, @extra])),
355              'test sslv2/sslv3 with server authentication');
356           ok(run(test([@ssltest, "-client_auth", @CA, @extra])),
357              'test sslv2/sslv3 with client authentication');
358           ok(run(test([@ssltest, "-server_auth", "-client_auth", @CA, @extra])),
359              'test sslv2/sslv3 with both server and client authentication');
360         }
361
362       SKIP: {
363           skip "SSLv3 is not supported by this OpenSSL build", 4
364               if disabled("ssl3");
365
366           ok(run(test([@ssltest, "-bio_pair", "-ssl3", @extra])),
367              'test sslv3 via BIO pair');
368           ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA, @extra])),
369              'test sslv3 with server authentication via BIO pair');
370           ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA, @extra])),
371              'test sslv3 with client authentication via BIO pair');
372           ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA, @extra])),
373              'test sslv3 with both server and client authentication via BIO pair');
374         }
375
376       SKIP: {
377           skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 1
378               if $no_anytls;
379
380           ok(run(test([@ssltest, "-bio_pair", @extra])),
381              'test sslv2/sslv3 via BIO pair');
382         }
383
384       SKIP: {
385           skip "DTLSv1 is not supported by this OpenSSL build", 4
386               if disabled("dtls1");
387
388           ok(run(test([@ssltest, "-dtls1", @extra])),
389              'test dtlsv1');
390           ok(run(test([@ssltest, "-dtls1", "-server_auth", @CA, @extra])),
391            'test dtlsv1 with server authentication');
392           ok(run(test([@ssltest, "-dtls1", "-client_auth", @CA, @extra])),
393              'test dtlsv1 with client authentication');
394           ok(run(test([@ssltest, "-dtls1", "-server_auth", "-client_auth", @CA, @extra])),
395              'test dtlsv1 with both server and client authentication');
396         }
397
398       SKIP: {
399           skip "DTLSv1.2 is not supported by this OpenSSL build", 4
400               if disabled("dtls1_2");
401
402           ok(run(test([@ssltest, "-dtls12", @extra])),
403              'test dtlsv1.2');
404           ok(run(test([@ssltest, "-dtls12", "-server_auth", @CA, @extra])),
405              'test dtlsv1.2 with server authentication');
406           ok(run(test([@ssltest, "-dtls12", "-client_auth", @CA, @extra])),
407              'test dtlsv1.2 with client authentication');
408           ok(run(test([@ssltest, "-dtls12", "-server_auth", "-client_auth", @CA, @extra])),
409              'test dtlsv1.2 with both server and client authentication');
410         }
411
412       SKIP: {
413           skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 8
414               if $no_anytls;
415
416         SKIP: {
417             skip "skipping test of sslv2/sslv3 w/o (EC)DHE test", 1 if $dsa_cert;
418
419             ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe", @extra])),
420                'test sslv2/sslv3 w/o (EC)DHE via BIO pair');
421           }
422
423           ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v", @extra])),
424              'test sslv2/sslv3 with 1024bit DHE via BIO pair');
425           ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA, @extra])),
426              'test sslv2/sslv3 with server authentication');
427           ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA, @extra])),
428              'test sslv2/sslv3 with client authentication via BIO pair');
429           ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA, @extra])),
430              'test sslv2/sslv3 with both client and server authentication via BIO pair');
431           ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA, @extra])),
432              'test sslv2/sslv3 with both client and server authentication via BIO pair and app verify');
433
434         SKIP: {
435             skip "No IPv4 available on this machine", 1
436                 unless have_IPv4();
437             ok(run(test([@ssltest, "-ipv4", @extra])),
438                'test TLS via IPv4');
439           }
440           
441         SKIP: {
442             skip "No IPv6 available on this machine", 1
443                 unless have_IPv6();
444             ok(run(test([@ssltest, "-ipv6", @extra])),
445                'test TLS via IPv6');
446           }
447         }
448     };
449
450     subtest "Testing ciphersuites" => sub {
451
452         my @exkeys = ();
453         my $ciphers = "-EXP:-PSK:-SRP:-kDH:-kECDHe";
454
455         if ($no_dh) {
456             note "skipping DHE tests\n";
457             $ciphers .= ":-kDHE";
458         }
459         if ($no_dsa) {
460             note "skipping DSA tests\n";
461             $ciphers .= ":-aDSA";
462         } else {
463             push @exkeys, "-s_cert", "certD.ss", "-s_key", "keyD.ss";
464         }
465
466         if ($no_ec) {
467             note "skipping EC tests\n";
468             $ciphers .= ":!aECDSA:!kECDH";
469         } else {
470             push @exkeys, "-s_cert", "certE.ss", "-s_key", "keyE.ss";
471         }
472
473         my @protocols = ();
474         # FIXME: I feel unsure about the following line, is that really just TLSv1.2, or is it all of the SSLv3/TLS protocols?
475         push(@protocols, "TLSv1.2") unless $no_tls1_2;
476         push(@protocols, "SSLv3") unless $no_ssl3;
477         my $protocolciphersuitcount = 0;
478         my %ciphersuites =
479             map { my @c =
480                       map { split(/:/, $_) }
481                       run(app(["openssl", "ciphers", "${_}:$ciphers"]),
482                           capture => 1);
483                   map { s/\R//; } @c;  # chomp @c;
484                   $protocolciphersuitcount += scalar @c;
485                   $_ => [ @c ] } @protocols;
486
487         plan skip_all => "None of the ciphersuites to test are available in this OpenSSL build"
488             if $protocolciphersuitcount + scalar(@protocols) == 0;
489
490         # The count of protocols is because in addition to the ciphersuits
491         # we got above, we're running a weak DH test for each protocol
492         plan tests => $protocolciphersuitcount + scalar(@protocols);
493
494         foreach my $protocol (@protocols) {
495             note "Testing ciphersuites for $protocol";
496             foreach my $cipher (@{$ciphersuites{$protocol}}) {
497                 ok(run(test([@ssltest, @exkeys, "-cipher", $cipher,
498                              $protocol eq "SSLv3" ? ("-ssl3") : ()])),
499                    "Testing $cipher");
500             }
501             is(run(test([@ssltest,
502                          "-s_cipher", "EDH",
503                          "-c_cipher", 'EDH:@SECLEVEL=1',
504                          "-dhe512",
505                          $protocol eq "SSLv3" ? ("-ssl3") : ()])), 0,
506                "testing connection with weak DH, expecting failure");
507         }
508     };
509
510     subtest 'RSA/(EC)DHE/PSK tests' => sub {
511         ######################################################################
512
513         plan tests => 5;
514
515       SKIP: {
516           skip "TLSv1.0 is not supported by this OpenSSL build", 5
517               if $no_tls1;
518
519         SKIP: {
520             skip "skipping anonymous DH tests", 1
521               if ($no_dh);
522
523             ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time", @extra])),
524                'test tlsv1 with 1024bit anonymous DH, multiple handshakes');
525           }
526
527         SKIP: {
528             skip "skipping RSA tests", 2
529                 if $no_rsa;
530
531             ok(run(test(["ssltest", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time", @extra])),
532                'test tlsv1 with 1024bit RSA, no (EC)DHE, multiple handshakes');
533
534             skip "skipping RSA+DHE tests", 1
535                 if $no_dh;
536
537             ok(run(test(["ssltest", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time", @extra])),
538                'test tlsv1 with 1024bit RSA, 1024bit DHE, multiple handshakes');
539           }
540
541         SKIP: {
542             skip "skipping PSK tests", 2
543                 if ($no_psk);
544
545             ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123", @extra])),
546                'test tls1 with PSK');
547
548             ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123", @extra])),
549                'test tls1 with PSK via BIO pair');
550           }
551         }
552
553     };
554
555     subtest 'Next Protocol Negotiation Tests' => sub {
556         ######################################################################
557
558         plan tests => 7;
559
560       SKIP: {
561           skip "TLSv1.0 is not supported by this OpenSSL build", 7
562               if $no_tls1;
563
564           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client"])));
565           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_server"])));
566           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_server_reject"])));
567           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server_reject"])));
568           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server"])));
569           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server", "-num", "2"])));
570           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server", "-num", "2", "-reuse"])));
571         }
572     };
573
574     subtest 'Custom Extension tests' => sub {
575         ######################################################################
576
577         plan tests => 1;
578
579       SKIP: {
580           skip "TLSv1.0 is not supported by this OpenSSL build", 1
581               if $no_tls1;
582
583           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext"])),
584              'test tls1 with custom extensions');
585         }
586     };
587
588     subtest 'Serverinfo tests' => sub {
589         ######################################################################
590
591         plan tests => 5;
592
593       SKIP: {
594           skip "TLSv1.0 is not supported by this OpenSSL build", 5
595               if $no_tls1;
596
597           note('echo test tls1 with serverinfo');
598           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo])));
599           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct"])));
600           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_tack"])));
601           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
602           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
603         }
604     };
605
606     subtest 'SNI tests' => sub {
607
608         plan tests => 7;
609
610       SKIP: {
611           skip "TLSv1.x is not supported by this OpenSSL build", 7
612               if $no_tls1 && $no_tls1_1 && $no_tls1_2;
613
614           ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo"])));
615           ok(run(test([@ssltest, "-bio_pair", "-sn_server1", "foo"])));
616           ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo", "-sn_server1", "foo", "-sn_expect1"])));
617           ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo", "-sn_server1", "bar", "-sn_expect1"])));
618           ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo", "-sn_server1", "foo", "-sn_server2", "bar", "-sn_expect1"])));
619           ok(run(test([@ssltest, "-bio_pair", "-sn_client", "bar", "-sn_server1", "foo", "-sn_server2", "bar", "-sn_expect2"])));
620           # Negative test - make sure it doesn't crash, and doesn't switch contexts
621           ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foobar", "-sn_server1", "foo", "-sn_server2", "bar", "-sn_expect1"])));
622         }
623     };
624
625     subtest 'ALPN tests' => sub {
626         ######################################################################
627
628         plan tests => 12;
629
630       SKIP: {
631           skip "TLSv1.0 is not supported by this OpenSSL build", 12
632               if $no_tls1;
633
634           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo"])));
635           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_server", "foo"])));
636           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo", "-alpn_server", "foo", "-alpn_expected", "foo"])));
637           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo,bar", "-alpn_server", "foo", "-alpn_expected", "foo"])));
638           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "foo", "-alpn_expected", "foo"])));
639           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "foo,bar", "-alpn_expected", "foo"])));
640           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "bar,foo", "-alpn_expected", "bar"])));
641           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo,bar", "-alpn_server", "bar,foo", "-alpn_expected", "bar"])));
642
643           is(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo", "-alpn_server", "bar"])), 0,
644              "Testing ALPN with protocol mismatch, expecting failure");
645           is(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "baz", "-alpn_server", "bar,foo"])), 0,
646              "Testing ALPN with protocol mismatch, expecting failure");
647
648           # ALPN + SNI
649           ok(run(test([@ssltest, "-bio_pair",
650                        "-alpn_client", "foo,bar", "-sn_client", "alice",
651                        "-alpn_server1", "foo,123", "-sn_server1", "alice",
652                        "-alpn_server2", "bar,456", "-sn_server2", "bob",
653                        "-alpn_expected", "foo"])));
654           ok(run(test([@ssltest, "-bio_pair",
655                        "-alpn_client", "foo,bar", "-sn_client", "bob",
656                        "-alpn_server1", "foo,123", "-sn_server1", "alice",
657                        "-alpn_server2", "bar,456", "-sn_server2", "bob",
658                        "-alpn_expected", "bar"])));
659         }
660     };
661
662     subtest 'SRP tests' => sub {
663
664         plan tests => 4;
665
666       SKIP: {
667           skip "skipping SRP tests", 4
668               if $no_srp;
669
670           ok(run(test([@ssltest, "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
671              'test tls1 with SRP');
672
673           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
674              'test tls1 with SRP via BIO pair');
675
676           ok(run(test([@ssltest, "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])),
677              'test tls1 with SRP auth');
678
679           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])),
680              'test tls1 with SRP auth via BIO pair');
681         }
682     };
683
684     subtest 'Multi-buffer tests' => sub {
685         ######################################################################
686
687         plan tests => 2;
688
689       SKIP: {
690           skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 2
691               if $no_anytls;
692
693           skip "skipping multi-buffer tests", 2
694               if @extra || (POSIX::uname())[4] ne "x86_64";
695
696           ok(run(test([@ssltest, "-cipher", "AES128-SHA",    "-bytes", "8m"])));
697
698           # We happen to know that AES128-SHA256 is TLSv1.2 only... for now.
699           skip "TLSv1.2 is not supported by this OpenSSL configuration", 1
700               if $no_tls1_2;
701
702           ok(run(test([@ssltest, "-cipher", "AES128-SHA256", "-bytes", "8m"])));
703         }
704     };
705
706     subtest 'TLS Version min/max tests' => sub {
707         my @protos;
708         push(@protos, "ssl3") unless $no_ssl3;
709         push(@protos, "tls1") unless $no_tls1;
710         push(@protos, "tls1.1") unless $no_tls1_1;
711         push(@protos, "tls1.2") unless $no_tls1_2;
712         my @minprotos = (undef, @protos);
713         my @maxprotos = (@protos, undef);
714         my @shdprotos = (@protos, $protos[$#protos]);
715         my $n = ((@protos+2) * (@protos+3))/2 - 2;
716         my $ntests = $n * $n;
717         plan tests => $ntests;
718       SKIP: {
719         skip "TLS disabled", 1 if $ntests == 1;
720
721         my $should;
722         for (my $smin = 0; $smin < @minprotos; ++$smin) {
723         for (my $smax = $smin ? $smin - 1 : 0; $smax < @maxprotos; ++$smax) {
724         for (my $cmin = 0; $cmin < @minprotos; ++$cmin) {
725         for (my $cmax = $cmin ? $cmin - 1 : 0; $cmax < @maxprotos; ++$cmax) {
726             if ($cmax < $smin-1) {
727                 $should = "fail-server";
728             } elsif ($smax < $cmin-1) {
729                 $should = "fail-client";
730             } elsif ($cmax > $smax) {
731                 $should = $shdprotos[$smax];
732             } else {
733                 $should = $shdprotos[$cmax];
734             }
735
736             my @args = @ssltest;
737             push(@args, "-should_negotiate", $should);
738             push(@args, "-server_min_proto", $minprotos[$smin])
739                 if (defined($minprotos[$smin]));
740             push(@args, "-server_max_proto", $maxprotos[$smax])
741                 if (defined($maxprotos[$smax]));
742             push(@args, "-client_min_proto", $minprotos[$cmin])
743                 if (defined($minprotos[$cmin]));
744             push(@args, "-client_max_proto", $maxprotos[$cmax])
745                 if (defined($maxprotos[$cmax]));
746             my $ok = run(test[@args]);
747             if (! $ok) {
748                 print STDERR "\nsmin=$smin, smax=$smax, cmin=$cmin, cmax=$cmax\n";
749                 print STDERR "\nFailed: @args\n";
750             }
751             ok($ok);
752         }}}}}
753     };
754
755     subtest 'DTLS Version min/max tests' => sub {
756         my @protos;
757         push(@protos, "dtls1") unless ($no_dtls1 || $no_dtls);
758         push(@protos, "dtls1.2") unless ($no_dtls1_2 || $no_dtls);
759         my @minprotos = (undef, @protos);
760         my @maxprotos = (@protos, undef);
761         my @shdprotos = (@protos, $protos[$#protos]);
762         my $n = ((@protos+2) * (@protos+3))/2 - 2;
763         my $ntests = $n * $n;
764         plan tests => $ntests;
765       SKIP: {
766         skip "DTLS disabled", 1 if $ntests == 1;
767
768         my $should;
769         for (my $smin = 0; $smin < @minprotos; ++$smin) {
770         for (my $smax = $smin ? $smin - 1 : 0; $smax < @maxprotos; ++$smax) {
771         for (my $cmin = 0; $cmin < @minprotos; ++$cmin) {
772         for (my $cmax = $cmin ? $cmin - 1 : 0; $cmax < @maxprotos; ++$cmax) {
773             if ($cmax < $smin-1) {
774                 $should = "fail-server";
775             } elsif ($smax < $cmin-1) {
776                 $should = "fail-client";
777             } elsif ($cmax > $smax) {
778                 $should = $shdprotos[$smax];
779             } else {
780                 $should = $shdprotos[$cmax];
781             }
782
783             my @args = (@ssltest, "-dtls");
784             push(@args, "-should_negotiate", $should);
785             push(@args, "-server_min_proto", $minprotos[$smin])
786                 if (defined($minprotos[$smin]));
787             push(@args, "-server_max_proto", $maxprotos[$smax])
788                 if (defined($maxprotos[$smax]));
789             push(@args, "-client_min_proto", $minprotos[$cmin])
790                 if (defined($minprotos[$cmin]));
791             push(@args, "-client_max_proto", $maxprotos[$cmax])
792                 if (defined($maxprotos[$cmax]));
793             my $ok = run(test[@args]);
794             if (! $ok) {
795                 print STDERR "\nsmin=$smin, smax=$smax, cmin=$cmin, cmax=$cmax\n";
796                 print STDERR "\nFailed: @args\n";
797             }
798             ok($ok);
799         }}}}}
800     };
801
802     subtest 'Certificate Transparency tests' => sub {
803         ######################################################################
804
805         plan tests => 3;
806
807       SKIP: {
808           skip "Certificate Transparency is not supported by this OpenSSL build", 3
809               if $no_ct;
810           skip "TLSv1.0 is not supported by this OpenSSL build", 3
811               if $no_tls1;
812
813     $ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
814           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-noct"])));
815           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-requestct"])));
816           # No SCTs provided, so this should fail.
817           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-requirect",
818                        "-should_negotiate", "fail-client"])));
819         }
820     };
821
822 }
823
824 sub testsslproxy {
825     my $key = shift || srctop_file("apps","server.pem");
826     my $cert = shift || srctop_file("apps","server.pem");
827     my $CAtmp = shift;
828     my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", bldtop_dir("certs"));
829     my @extra = @_;
830
831     my @ssltest = ("ssltest",
832                    "-s_key", $key, "-s_cert", $cert,
833                    "-c_key", $key, "-c_cert", $cert);
834
835     # plan tests => 16;
836
837     note('Testing a lot of proxy conditions.');
838
839     # We happen to know that certP1.ss has policy letters "AB" and
840     # certP2.ss has policy letters "BC".  However, because certP2.ss
841     # has certP1.ss as issuer, when it's used, both their policy
842     # letters get combined into just "B".
843     # The policy letter(s) then get filtered with the given auth letter
844     # in the table below, and the result gets tested with the given
845     # condition.  For details, read ssltest.c
846     #
847     # certfilename => [ [ auth, cond, expected result ] ... ]
848     my %expected = ( "certP1.ss" => [ [ [ 'A',  'A'      ], 1 ],
849                                       [ [ 'A',  'B'      ], 0 ],
850                                       [ [ 'A',  'C'      ], 0 ],
851                                       [ [ 'A',  'A|B&!C' ], 1 ],
852                                       [ [ 'B',  'A'      ], 0 ],
853                                       [ [ 'B',  'B'      ], 1 ],
854                                       [ [ 'B',  'C'      ], 0 ],
855                                       [ [ 'B',  'A|B&!C' ], 1 ],
856                                       [ [ 'C',  'A'      ], 0 ],
857                                       [ [ 'C',  'B'      ], 0 ],
858                                       [ [ 'C',  'C'      ], 0 ],
859                                       [ [ 'C',  'A|B&!C' ], 0 ],
860                                       [ [ 'BC', 'A'      ], 0 ],
861                                       [ [ 'BC', 'B'      ], 1 ],
862                                       [ [ 'BC', 'C'      ], 0 ],
863                                       [ [ 'BC', 'A|B&!C' ], 1 ] ],
864                      "certP2.ss" => [ [ [ 'A',  'A'      ], 0 ],
865                                       [ [ 'A',  'B'      ], 0 ],
866                                       [ [ 'A',  'C'      ], 0 ],
867                                       [ [ 'A',  'A|B&!C' ], 0 ],
868                                       [ [ 'B',  'A'      ], 0 ],
869                                       [ [ 'B',  'B'      ], 1 ],
870                                       [ [ 'B',  'C'      ], 0 ],
871                                       [ [ 'B',  'A|B&!C' ], 1 ],
872                                       [ [ 'C',  'A'      ], 0 ],
873                                       [ [ 'C',  'B'      ], 0 ],
874                                       [ [ 'C',  'C'      ], 0 ],
875                                       [ [ 'C',  'A|B&!C' ], 0 ],
876                                       [ [ 'BC', 'A'      ], 0 ],
877                                       [ [ 'BC', 'B'      ], 1 ],
878                                       [ [ 'BC', 'C'      ], 0 ],
879                                       [ [ 'BC', 'A|B&!C' ], 1 ] ] );
880
881   SKIP: {
882       skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", scalar(@{$expected{$cert}})
883           if $no_anytls;
884
885       foreach (@{$expected{$cert}}) {
886           my $auth = $_->[0]->[0];
887           my $cond = $_->[0]->[1];
888           my $res  = $_->[1];
889           is(run(test([@ssltest, "-server_auth", @CA,
890                        "-proxy", "-proxy_auth", $auth,
891                        "-proxy_cond", $cond])), $res,
892              "test tlsv1, server auth, proxy auth $auth and cond $cond (expect "
893              .($res ? "success" : "failure").")");
894       }
895     }
896 }