4 This document describes installation on all supported operating
5 systems (the Unix/Linux family (which includes Mac OS/X), OpenVMS,
8 To install OpenSSL, you will need:
10 * A make implementation
11 * Perl 5 with core modules (please read NOTES.PERL)
12 * The perl module Text::Template (please read NOTES.PERL)
14 * a development environment in the form of development libraries and C
16 * a supported operating system
18 For additional platform specific requirements, solutions to specific
19 issues and other details, please read one of these:
21 * NOTES.UNIX (any supported Unix like system)
23 * NOTES.WIN (any supported Windows)
24 * NOTES.DJGPP (DOS platform with DJGPP)
25 * NOTES.ANDROID (obviously Android [NDK])
26 * NOTES.VALGRIND (testing with Valgrind)
28 Notational conventions in this document
29 ---------------------------------------
31 Throughout this document, we use the following conventions in command
34 $ command Any line starting with a dollar sign
35 ($) is a command line.
37 { word1 | word2 | word3 } This denotes a mandatory choice, to be
38 replaced with one of the given words.
39 A simple example would be this:
41 $ echo { FOO | BAR | COOKIE }
43 which is to be understood as one of
52 [ word1 | word2 | word3 ] Similar to { word1 | word2 | word3 }
53 except it's optional to give any of
54 those. In addition to the examples
55 above, this would also be valid:
59 {{ target }} This denotes a mandatory word or
60 sequence of words of some sort. A
61 simple example would be this:
65 which is to be understood to use the
66 command 'type' on some file name
67 determined by the user.
69 [[ options ]] Similar to {{ target }}, but is
72 Note that the notation assumes spaces around {, }, [, ], {{, }} and
73 [[, ]]. This is to differentiate from OpenVMS directory
74 specifications, which also use [ and ], but without spaces.
79 If you want to just get on with it, do:
81 on Unix (again, this includes Mac OS/X):
95 on Windows (only pick one of the targets for configuration):
97 $ perl Configure { VC-WIN32 | VC-WIN64A | VC-WIN64I | VC-CE }
102 Note that in order to perform the install step above you need to have
103 appropriate permissions to write to the installation directory.
105 If any of these steps fails, see section Installation in Detail below.
107 This will build and install OpenSSL in the default location, which is:
109 Unix: normal installation directories under /usr/local
110 OpenVMS: SYS$COMMON:[OPENSSL-'version'...], where 'version' is the
111 OpenSSL version number with underscores instead of periods.
112 Windows: C:\Program Files\OpenSSL or C:\Program Files (x86)\OpenSSL
114 The installation directory should be appropriately protected to ensure
115 unprivileged users cannot make changes to OpenSSL binaries or files, or install
116 engines. If you already have a pre-installed version of OpenSSL as part of
117 your Operating System it is recommended that you do not overwrite the system
118 version and instead install to somewhere else.
120 If you want to install it anywhere else, run config like this:
124 $ ./config --prefix=/opt/openssl --openssldir=/usr/local/ssl
128 $ @config --prefix=PROGRAM:[INSTALLS] --openssldir=SYS$MANAGER:[OPENSSL]
130 (Note: if you do add options to the configuration command, please make sure
131 you've read more than just this Quick Start, such as relevant NOTES.* files,
132 the options outline below, as configuration options may change the outcome
133 in otherwise unexpected ways)
136 Configuration Options
137 ---------------------
139 There are several options to ./config (or ./Configure) to customize
140 the build (note that for Windows, the defaults for --prefix and
141 --openssldir depend in what configuration is used and what Windows
142 implementation OpenSSL is built on. More notes on this in NOTES.WIN):
145 Build the OpenSSL libraries to support the API for
146 the specified version. If "no-deprecated" is also
147 given, don't build with support for deprecated APIs
148 in or below the specified version number. For example
149 "--api=1.1.0" with "no-deprecated" will remove
150 support for all APIS that were deprecated in
151 OpenSSL version 1.1.0 or below.
152 This is a rather specialized option for developers.
153 If you just intend to remove all deprecated APIs
154 entirely (up to the current version), only specify
155 "-no-deprecated" (see below).
156 If "--api" isn't given, it defaults to the current
157 OpenSSL minor version.
159 --cross-compile-prefix=PREFIX
160 The PREFIX to include in front of commands for your
161 toolchain. It's likely to have to end with dash, e.g.
162 a-b-c- would invoke GNU compiler as a-b-c-gcc, etc.
163 Unfortunately cross-compiling is too case-specific to
164 put together one-size-fits-all instructions. You might
165 have to pass more flags or set up environment variables
166 to actually make it work. Android and iOS cases are
167 discussed in corresponding Configurations/15-*.conf
168 files. But there are cases when this option alone is
169 sufficient. For example to build the mingw64 target on
170 Linux "--cross-compile-prefix=x86_64-w64-mingw32-"
171 works. Naturally provided that mingw packages are
172 installed. Today Debian and Ubuntu users have option to
173 install a number of prepackaged cross-compilers along
174 with corresponding run-time and development packages for
175 "alien" hardware. To give another example
176 "--cross-compile-prefix=mipsel-linux-gnu-" suffices
177 in such case. Needless to mention that you have to
178 invoke ./Configure, not ./config, and pass your target
179 name explicitly. Also, note that --openssldir refers
180 to target's file system, not one you are building on.
183 Build OpenSSL with debugging symbols and zero optimization
187 The name of the directory under the top of the installation
188 directory tree (see the --prefix option) where libraries will
189 be installed. By default this is "lib". Note that on Windows
190 only ".lib" files will be stored in this location. dll files
191 will always be installed to the "bin" directory.
194 Directory for OpenSSL configuration files, and also the
195 default certificate and key store. Defaults are:
198 Windows: C:\Program Files\Common Files\SSL
199 or C:\Program Files (x86)\Common Files\SSL
200 OpenVMS: SYS$COMMON:[OPENSSL-COMMON]
203 The top of the installation directory tree. Defaults are:
206 Windows: C:\Program Files\OpenSSL
207 or C:\Program Files (x86)\OpenSSL
208 OpenVMS: SYS$COMMON:[OPENSSL-'version']
211 Build OpenSSL without debugging symbols. This is the default.
214 This is a developer flag that switches on various compiler
215 options recommended for OpenSSL development. It only works
216 when using gcc or clang as the compiler. If you are
217 developing a patch for OpenSSL then it is recommended that
218 you use this option where possible.
220 --with-zlib-include=DIR
221 The directory for the location of the zlib include file. This
222 option is only necessary if enable-zlib (see below) is used
223 and the include file is not already on the system include
227 On Unix: this is the directory containing the zlib library.
228 If not provided the system library path will be used.
229 On Windows: this is the filename of the zlib library (with or
230 without a path). This flag must be provided if the
231 zlib-dynamic option is not also used. If zlib-dynamic is used
232 then this flag is optional and a default value ("ZLIB1") is
233 used if not provided.
234 On VMS: this is the filename of the zlib library (with or
235 without a path). This flag is optional and if not provided
236 then "GNV$LIBZSHR", "GNV$LIBZSHR32" or "GNV$LIBZSHR64" is
237 used by default depending on the pointer size chosen.
240 --with-rand-seed=seed1[,seed2,...]
241 A comma separated list of seeding methods which will be tried
242 by OpenSSL in order to obtain random input (a.k.a "entropy")
243 for seeding its cryptographically secure random number
244 generator (CSPRNG). The current seeding methods are:
246 os: Use a trusted operating system entropy source.
247 This is the default method if such an entropy
249 getrandom: Use the L<getrandom(2)> or equivalent system
251 devrandom: Use the first device from the DEVRANDOM list
252 which can be opened to read random bytes. The
253 DEVRANDOM preprocessor constant expands to
254 "/dev/urandom","/dev/random","/dev/srandom" on
255 most unix-ish operating systems.
256 egd: Check for an entropy generating daemon.
257 rdcpu: Use the RDSEED or RDRAND command if provided by
259 librandom: Use librandom (not implemented yet).
260 none: Disable automatic seeding. This is the default
261 on some operating systems where no suitable
262 entropy source exists, or no support for it is
265 For more information, see the section 'Note on random number
266 generation' at the end of this document.
269 Don't build the AFALG engine. This option will be forced if
270 on a platform that does not support AFALG.
273 Build with Kernel TLS support. This option will enable the
274 use of the Kernel TLS data-path, which can improve
275 performance and allow for the use of sendfile and splice
276 system calls on TLS sockets. The Kernel may use TLS
277 accelerators if any are available on the system.
278 This option will be forced off on systems that do not support
279 the Kernel TLS data-path.
282 Build with the Address sanitiser. This is a developer option
283 only. It may not work on all platforms and should never be
284 used in production environments. It will only work when used
285 with gcc or clang and should be used in conjunction with the
289 Do not use assembler code. This should be viewed as
290 debugging/trouble-shooting option rather than production.
291 On some platforms a small amount of assembler code may
292 still be used even with this option.
295 Do not build support for async operations.
298 Don't automatically load all supported ciphers and digests.
299 Typically OpenSSL will make available all of its supported
300 ciphers and digests. For a statically linked application this
301 may be undesirable if small executable size is an objective.
302 This only affects libcrypto. Ciphers and digests will have to
303 be loaded manually using EVP_add_cipher() and
304 EVP_add_digest() if this option is used. This option will
305 force a non-shared build.
308 Don't automatically load all libcrypto/libssl error strings.
309 Typically OpenSSL will automatically load human readable
310 error strings. For a statically linked application this may
311 be undesirable if small executable size is an objective.
314 Don't automatically load the default openssl.cnf file.
315 Typically OpenSSL will automatically load a system config
316 file which configures default ssl options.
319 While testing, generate C++ buildtest files that
320 simply check that the public OpenSSL header files
321 are usable standalone with C++.
323 Enabling this option demands extra care. For any
324 compiler flag given directly as configuration
325 option, you must ensure that it's valid for both
326 the C and the C++ compiler. If not, the C++ build
327 test will most likely break. As an alternative,
328 you can use the language specific variables, CFLAGS
332 Don't build the CAPI engine. This option will be forced if
333 on a platform that does not support CAPI.
336 Don't build support for CMP features
339 Don't build support for CMS features
342 Don't build support for SSL/TLS compression. If this option
343 is left enabled (the default), then compression will only
344 work if the zlib or zlib-dynamic options are also chosen.
347 This now only enables the failed-malloc feature.
349 enable-crypto-mdebug-backtrace
350 This is a no-op; the project uses the compiler's
351 address/leak sanitizer instead.
354 Don't build support for Certificate Transparency.
357 Don't build with support for deprecated APIs up
358 until and including the version given with
359 "--api" (or the current version of "--api" wasn't
363 Don't build support for datagram based BIOs. Selecting this
364 option will also force the disabling of DTLS.
367 Don't build support for loading Dynamic Shared Objects.
370 Build the /dev/crypto engine. It is automatically selected
371 on BSD implementations, in which case it can be disabled with
375 Don't build the dynamically loaded engines. This only has an
376 effect in a "shared" build
379 Don't build support for Elliptic Curves.
382 Don't build support for binary Elliptic Curves
384 enable-ec_nistp_64_gcc_128
385 Enable support for optimised implementations of some commonly
386 used NIST elliptic curves.
387 This is only supported on platforms:
388 - with little-endian storage of non-byte types
389 - that tolerate misaligned memory references
390 - where the compiler:
391 - supports the non-standard type __uint128_t
392 - defines the built-in macro __SIZEOF_INT128__
395 Build support for gathering entropy from EGD (Entropy
399 Don't build support for loading engines.
402 Don't compile in any error strings.
404 enable-external-tests
405 Enable building of integration with external test suites.
406 This is a developer option and may not work on all platforms.
407 The only supported external test suite at the current time is
408 the BoringSSL test suite. See the file test/README.external
412 Don't compile in filename and line number information (e.g.
413 for errors and memory allocation).
416 Don't compile the FIPS module
418 enable-fuzz-libfuzzer, enable-fuzz-afl
419 Build with support for fuzzing using either libfuzzer or AFL.
420 These are developer options only. They may not work on all
421 platforms and should never be used in production environments.
422 See the file fuzz/README.md for further details.
425 Don't build support for GOST based ciphersuites. Note that
426 if this feature is enabled then GOST ciphersuites are only
427 available if the GOST algorithms are also available through
428 loading an externally supplied engine.
431 Don't build the legacy provider. Disabling this also disables
432 the legacy algorithms: MD2 (already disabled by default).
435 Don't generate dependencies.
438 Don't build any dynamically loadable engines. This also
439 implies 'no-dynamic-engine'.
442 Don't build support for writing multiple records in one
443 go in libssl (Note: this is a different capability to the
444 pipelining functionality).
447 Don't build support for the NPN TLS extension.
450 Don't build support for OCSP.
454 Don't build the padlock engine.
455 ('no-hw-padlock' is deprecated and should not be used)
458 Don't build with support for Position Independent Code.
460 no-pinshared By default OpenSSL will attempt to stay in memory until the
461 process exits. This is so that libcrypto and libssl can be
462 properly cleaned up automatically via an "atexit()" handler.
463 The handler is registered by libcrypto and cleans up both
464 libraries. On some platforms the atexit() handler will run on
465 unload of libcrypto (if it has been dynamically loaded)
466 rather than at process exit. This option can be used to stop
467 OpenSSL from attempting to stay in memory until the process
468 exits. This could lead to crashes if either libcrypto or
469 libssl have already been unloaded at the point
470 that the atexit handler is invoked, e.g. on a platform which
471 calls atexit() on unload of the library, and libssl is
472 unloaded before libcrypto then a crash is likely to happen.
473 Applications can suppress running of the atexit() handler at
474 run time by using the OPENSSL_INIT_NO_ATEXIT option to
475 OPENSSL_init_crypto(). See the man page for it for further
479 Don't use POSIX IO capabilities.
482 Don't build support for Pre-Shared Key based ciphersuites.
485 Don't use hardware RDRAND capabilities.
488 Don't build support for RFC3779 ("X.509 Extensions for IP
489 Addresses and AS Identifiers")
492 Build support for SCTP
495 Do not create shared libraries, only static ones. See "Note
496 on shared libraries" below.
499 Don't build support for socket BIOs
502 Don't build support for SRP or SRP based ciphersuites.
505 Don't build SRTP support
508 Exclude SSE2 code paths from 32-bit x86 assembly modules.
509 Normally SSE2 extension is detected at run-time, but the
510 decision whether or not the machine code will be executed
511 is taken solely on CPU capability vector. This means that
512 if you happen to run OS kernel which does not support SSE2
513 extension on Intel P4 processor, then your application
514 might be exposed to "illegal instruction" exception.
515 There might be a way to enable support in kernel, e.g.
516 FreeBSD kernel can be compiled with CPU_ENABLE_SSE, and
517 there is a way to disengage SSE2 code paths upon application
518 start-up, but if you aim for wider "audience" running
519 such kernel, consider no-sse2. Both the 386 and
520 no-asm options imply no-sse2.
523 Build with the SSL Trace capabilities (adds the "-trace"
524 option to s_client and s_server).
527 Don't build the statically linked engines. This only
528 has an impact when not built "shared".
531 Don't use anything from the C header file "stdio.h" that
532 makes use of the "FILE" type. Only libcrypto and libssl can
533 be built in this way. Using this option will suppress
534 building the command line applications. Additionally since
535 the OpenSSL tests also use the command line applications the
536 tests will also be skipped.
539 Don't build test programs or run any test.
542 Don't try to build with support for multi-threaded
546 Build with support for multi-threaded applications. Most
547 platforms will enable this by default. However if on a
548 platform where this is not the case then this will usually
549 require additional system-dependent options! See "Note on
550 multi-threading" below.
553 Build with support for the integrated tracing api. See manual pages
554 OSSL_trace_set_channel(3) and OSSL_trace_enabled(3) for details.
557 Don't build Time Stamping Authority support.
560 Build with the Undefined Behaviour sanitiser. This is a
561 developer option only. It may not work on all platforms and
562 should never be used in production environments. It will only
563 work when used with gcc or clang and should be used in
564 conjunction with the "-DPEDANTIC" option (or the
565 --strict-warnings option).
568 Don't build with the "UI" capability (i.e. the set of
569 features enabling text based prompts).
572 Enable additional unit test APIs. This should not typically
573 be used in production deployments.
576 Don't build support for UPLINK interface.
578 enable-weak-ssl-ciphers
579 Build support for SSL/TLS ciphers that are considered "weak"
580 (e.g. RC4 based ciphersuites).
583 Build with support for zlib compression/decompression.
586 Like "zlib", but has OpenSSL load the zlib library
587 dynamically when needed. This is only supported on systems
588 where loading of shared libraries is supported.
591 In 32-bit x86 builds, when generating assembly modules,
592 use the 80386 instruction set only (the default x86 code
593 is more efficient, but requires at least a 486). Note:
594 This doesn't affect code generated by compiler, you're
595 likely to complement configuration command line with
596 suitable compiler-specific option.
599 Don't build support for negotiating the specified SSL/TLS
600 protocol (one of ssl, ssl3, tls, tls1, tls1_1, tls1_2,
601 tls1_3, dtls, dtls1 or dtls1_2). If "no-tls" is selected then
602 all of tls1, tls1_1, tls1_2 and tls1_3 are disabled.
603 Similarly "no-dtls" will disable dtls1 and dtls1_2. The
604 "no-ssl" option is synonymous with "no-ssl3". Note this only
605 affects version negotiation. OpenSSL will still provide the
606 methods for applications to explicitly select the individual
610 As for no-<prot> but in addition do not build the methods for
611 applications to explicitly select individual protocol
612 versions. Note that there is no "no-tls1_3-method" option
613 because there is no application method for TLSv1.3. Using
614 individual protocol methods directly is deprecated.
615 Applications should use TLS_method() instead.
618 Build with support for the specified algorithm, where <alg>
619 is one of: md2 or rc5.
622 Build without support for the specified algorithm, where
623 <alg> is one of: aria, bf, blake2, camellia, cast, chacha,
624 cmac, des, dh, dsa, ecdh, ecdsa, idea, md4, mdc2, ocb,
625 poly1305, rc2, rc4, rmd160, scrypt, seed, siphash, siv, sm2,
626 sm3, sm4 or whirlpool. The "ripemd" algorithm is deprecated
627 and if used is synonymous with rmd160.
629 -Dxxx, -Ixxx, -Wp, -lxxx, -Lxxx, -Wl, -rpath, -R, -framework, -static
630 These system specific options will be recognised and
631 passed through to the compiler to allow you to define
632 preprocessor symbols, specify additional libraries, library
633 directories or other compiler options. It might be worth
634 noting that some compilers generate code specifically for
635 processor the compiler currently executes on. This is not
636 necessarily what you might have in mind, since it might be
637 unsuitable for execution on other, typically older,
638 processor. Consult your compiler documentation.
640 Take note of the VAR=value documentation below and how
641 these flags interact with those variables.
644 Additional options that are not otherwise recognised are
645 passed through as they are to the compiler as well.
646 Unix-style options beginning with a '-' or '+' and
647 Windows-style options beginning with a '/' are recognized.
648 Again, consult your compiler documentation.
650 If the option contains arguments separated by spaces,
651 then the URL-style notation %20 can be used for the space
652 character in order to avoid having to quote the option.
653 For example, -opt%20arg gets expanded to -opt arg.
654 In fact, any ASCII character can be encoded as %xx using its
655 hexadecimal encoding.
657 Take note of the VAR=value documentation below and how
658 these flags interact with those variables.
661 Assignment of environment variable for Configure. These
662 work just like normal environment variable assignments,
663 but are supported on all platforms and are confined to
664 the configuration scripts only. These assignments override
665 the corresponding value in the inherited environment, if
668 The following variables are used as "make variables" and
669 can be used as an alternative to giving preprocessor,
670 compiler and linker options directly as configuration.
671 The following variables are supported:
673 AR The static library archiver.
674 ARFLAGS Flags for the static library archiver.
675 AS The assembler compiler.
676 ASFLAGS Flags for the assembler compiler.
678 CFLAGS Flags for the C compiler.
679 CXX The C++ compiler.
680 CXXFLAGS Flags for the C++ compiler.
681 CPP The C/C++ preprocessor.
682 CPPFLAGS Flags for the C/C++ preprocessor.
683 CPPDEFINES List of CPP macro definitions, separated
684 by a platform specific character (':' or
685 space for Unix, ';' for Windows, ',' for
686 VMS). This can be used instead of using
687 -D (or what corresponds to that on your
688 compiler) in CPPFLAGS.
689 CPPINCLUDES List of CPP inclusion directories, separated
690 the same way as for CPPDEFINES. This can
691 be used instead of -I (or what corresponds
692 to that on your compiler) in CPPFLAGS.
693 HASHBANGPERL Perl invocation to be inserted after '#!'
694 in public perl scripts (only relevant on
696 LD The program linker (not used on Unix, $(CC)
698 LDFLAGS Flags for the shared library, DSO and
700 LDLIBS Extra libraries to use when linking.
701 Takes the form of a space separated list
702 of library specifications on Unix and
703 Windows, and as a comma separated list of
705 RANLIB The library archive indexer.
706 RC The Windows resource compiler.
707 RCFLAGS Flags for the Windows resource compiler.
708 RM The command to remove files and directories.
710 These cannot be mixed with compiling / linking flags given
711 on the command line. In other words, something like this
714 ./config -DFOO CPPFLAGS=-DBAR -DCOOKIE
716 Backward compatibility note:
718 To be compatible with older configuration scripts, the
719 environment variables are ignored if compiling / linking
720 flags are given on the command line, except for these:
722 AR, CC, CXX, CROSS_COMPILE, HASHBANGPERL, PERL, RANLIB, RC
725 For example, the following command will not see -DBAR:
727 CPPFLAGS=-DBAR ./config -DCOOKIE
729 However, the following will see both set variables:
731 CC=gcc CROSS_COMPILE=x86_64-w64-mingw32- \
734 If CC is set, it is advisable to also set CXX to ensure
735 both C and C++ compilers are in the same "family". This
736 becomes relevant with 'enable-external-tests' and
737 'enable-buildtest-c++'.
741 Reconfigure from earlier data. This fetches the previous
742 command line options and environment from data saved in
743 "configdata.pm", and runs the configuration process again,
744 using these options and environment.
745 Note: NO other option is permitted together with "reconf".
746 This means that you also MUST use "./Configure" (or
747 what corresponds to that on non-Unix platforms) directly
748 to invoke this option.
749 Note: The original configuration saves away values for ALL
750 environment variables that were used, and if they weren't
751 defined, they are still saved away with information that
752 they weren't originally defined. This information takes
753 precedence over environment variables that are defined
756 Displaying configuration data
757 -----------------------------
759 The configuration script itself will say very little, and finishes by
760 creating "configdata.pm". This perl module can be loaded by other scripts
761 to find all the configuration data, and it can also be used as a script to
762 display all sorts of configuration data in a human readable form.
764 For more information, please do:
766 $ ./configdata.pm --help # Unix
770 $ perl configdata.pm --help # Windows and VMS
772 Installation in Detail
773 ----------------------
775 1a. Configure OpenSSL for your operation system automatically:
777 NOTE: This is not available on Windows.
779 $ ./config [[ options ]] # Unix
783 $ @config [[ options ]] ! OpenVMS
785 For the remainder of this text, the Unix form will be used in all
786 examples, please use the appropriate form for your platform.
788 This guesses at your operating system (and compiler, if necessary) and
789 configures OpenSSL based on this guess. Run ./config -t to see
790 if it guessed correctly. If you want to use a different compiler, you
791 are cross-compiling for another platform, or the ./config guess was
792 wrong for other reasons, go to step 1b. Otherwise go to step 2.
794 On some systems, you can include debugging information as follows:
796 $ ./config -d [[ options ]]
798 1b. Configure OpenSSL for your operating system manually
800 OpenSSL knows about a range of different operating system, hardware and
801 compiler combinations. To see the ones it knows about, run
807 $ perl Configure # All other platforms
809 For the remainder of this text, the Unix form will be used in all
810 examples, please use the appropriate form for your platform.
812 Pick a suitable name from the list that matches your system. For most
813 operating systems there is a choice between using "cc" or "gcc". When
814 you have identified your system (and if necessary compiler) use this name
815 as the argument to Configure. For example, a "linux-elf" user would
818 $ ./Configure linux-elf [[ options ]]
820 If your system isn't listed, you will have to create a configuration
821 file named Configurations/{{ something }}.conf and add the correct
822 configuration for your system. See the available configs as examples
823 and read Configurations/README and Configurations/README.design for
826 The generic configurations "cc" or "gcc" should usually work on 32 bit
829 Configure creates a build file ("Makefile" on Unix, "makefile" on Windows
830 and "descrip.mms" on OpenVMS) from a suitable template in Configurations,
831 and defines various macros in include/openssl/configuration.h (generated
832 from include/openssl/configuration.h.in).
834 1c. Configure OpenSSL for building outside of the source tree.
836 OpenSSL can be configured to build in a build directory separate from
837 the directory with the source code. It's done by placing yourself in
838 some other directory and invoking the configuration commands from
843 $ mkdir /var/tmp/openssl-build
844 $ cd /var/tmp/openssl-build
845 $ /PATH/TO/OPENSSL/SOURCE/config [[ options ]]
849 $ /PATH/TO/OPENSSL/SOURCE/Configure {{ target }} [[ options ]]
853 $ set default sys$login:
854 $ create/dir [.tmp.openssl-build]
855 $ set default [.tmp.openssl-build]
856 $ @[PATH.TO.OPENSSL.SOURCE]config [[ options ]]
860 $ @[PATH.TO.OPENSSL.SOURCE]Configure {{ target }} [[ options ]]
865 $ mkdir \temp-openssl
867 $ perl d:\PATH\TO\OPENSSL\SOURCE\Configure {{ target }} [[ options ]]
869 Paths can be relative just as well as absolute. Configure will
870 do its best to translate them to relative paths whenever possible.
872 2. Build OpenSSL by running:
875 $ mms ! (or mmk) OpenVMS
878 This will build the OpenSSL libraries (libcrypto.a and libssl.a on
879 Unix, corresponding on other platforms) and the OpenSSL binary
880 ("openssl"). The libraries will be built in the top-level directory,
881 and the binary will be in the "apps" subdirectory.
885 If the build fails, look at the output. There may be reasons
886 for the failure that aren't problems in OpenSSL itself (like
887 missing standard headers).
889 If the build succeeded previously, but fails after a source or
890 configuration change, it might be helpful to clean the build tree
891 before attempting another build. Use this command:
894 $ mms clean ! (or mmk) OpenVMS
895 $ nmake clean # Windows
897 Assembler error messages can sometimes be sidestepped by using the
898 "no-asm" configuration option.
900 Compiling parts of OpenSSL with gcc and others with the system
901 compiler will result in unresolved symbols on some systems.
903 If you are still having problems you can get help by sending an email
904 to the openssl-users email list (see
905 https://www.openssl.org/community/mailinglists.html for details). If
906 it is a bug with OpenSSL itself, please open an issue on GitHub, at
907 https://github.com/openssl/openssl/issues. Please review the existing
908 ones first; maybe the bug was already reported or has already been
911 3. After a successful build, the libraries should be tested. Run:
915 $ nmake test # Windows
917 NOTE: you MUST run the tests from an unprivileged account (or
918 disable your privileges temporarily if your platform allows it).
920 If some tests fail, look at the output. There may be reasons for
921 the failure that isn't a problem in OpenSSL itself (like a
922 malfunction with Perl). You may want increased verbosity, that
923 can be accomplished like this:
925 Verbosity on failure only (make macro VERBOSE_FAILURE or VF):
927 $ make VF=1 test # Unix
928 $ mms /macro=(VF=1) test ! OpenVMS
929 $ nmake VF=1 test # Windows
931 Full verbosity (make macro VERBOSE or V):
933 $ make V=1 test # Unix
934 $ mms /macro=(V=1) test ! OpenVMS
935 $ nmake V=1 test # Windows
937 If you want to run just one or a few specific tests, you can use
938 the make variable TESTS to specify them, like this:
940 $ make TESTS='test_rsa test_dsa' test # Unix
941 $ mms/macro="TESTS=test_rsa test_dsa" test ! OpenVMS
942 $ nmake TESTS='test_rsa test_dsa' test # Windows
944 And of course, you can combine (Unix example shown):
946 $ make VF=1 TESTS='test_rsa test_dsa' test
948 You can find the list of available tests like this:
950 $ make list-tests # Unix
951 $ mms list-tests ! OpenVMS
952 $ nmake list-tests # Windows
954 Have a look at the manual for the perl module Test::Harness to
955 see what other HARNESS_* variables there are.
957 If you find a problem with OpenSSL itself, try removing any
958 compiler optimization flags from the CFLAGS line in Makefile and
959 run "make clean; make" or corresponding.
961 To report a bug please open an issue on GitHub, at
962 https://github.com/openssl/openssl/issues.
964 For more details on how the make variables TESTS can be used,
965 see section TESTS in Detail below.
967 4. If everything tests ok, install OpenSSL with
969 $ make install # Unix
970 $ mms install ! OpenVMS
971 $ nmake install # Windows
973 Note that in order to perform the install step above you need to have
974 appropriate permissions to write to the installation directory.
976 The above commands will install all the software components in this
977 directory tree under PREFIX (the directory given with --prefix or its
982 bin/ Contains the openssl binary and a few other
985 Contains the header files needed if you want
986 to build your own programs that use libcrypto
988 lib Contains the OpenSSL library files.
989 lib/engines Contains the OpenSSL dynamically loadable engines.
991 share/man/man1 Contains the OpenSSL command line man-pages.
992 share/man/man3 Contains the OpenSSL library calls man-pages.
993 share/man/man5 Contains the OpenSSL configuration format man-pages.
994 share/man/man7 Contains the OpenSSL other misc man-pages.
996 share/doc/openssl/html/man1
997 share/doc/openssl/html/man3
998 share/doc/openssl/html/man5
999 share/doc/openssl/html/man7
1000 Contains the HTML rendition of the man-pages.
1002 OpenVMS ('arch' is replaced with the architecture name, "Alpha"
1003 or "ia64", 'sover' is replaced with the shared library version
1004 (0101 for 1.1), and 'pz' is replaced with the pointer size
1005 OpenSSL was built with):
1007 [.EXE.'arch'] Contains the openssl binary.
1008 [.EXE] Contains a few utility scripts.
1010 Contains the header files needed if you want
1011 to build your own programs that use libcrypto
1013 [.LIB.'arch'] Contains the OpenSSL library files.
1014 [.ENGINES'sover''pz'.'arch']
1015 Contains the OpenSSL dynamically loadable engines.
1016 [.SYS$STARTUP] Contains startup, login and shutdown scripts.
1017 These define appropriate logical names and
1019 [.SYSTEST] Contains the installation verification procedure.
1020 [.HTML] Contains the HTML rendition of the manual pages.
1023 Additionally, install will add the following directories under
1024 OPENSSLDIR (the directory given with --openssldir or its default)
1025 for you convenience:
1027 certs Initially empty, this is the default location
1028 for certificate files.
1029 private Initially empty, this is the default location
1030 for private key files.
1031 misc Various scripts.
1033 The installation directory should be appropriately protected to ensure
1034 unprivileged users cannot make changes to OpenSSL binaries or files, or
1035 install engines. If you already have a pre-installed version of OpenSSL as
1036 part of your Operating System it is recommended that you do not overwrite
1037 the system version and instead install to somewhere else.
1039 Package builders who want to configure the library for standard
1040 locations, but have the package installed somewhere else so that
1041 it can easily be packaged, can use
1043 $ make DESTDIR=/tmp/package-root install # Unix
1044 $ mms/macro="DESTDIR=TMP:[PACKAGE-ROOT]" install ! OpenVMS
1046 The specified destination directory will be prepended to all
1047 installation target paths.
1049 Compatibility issues with previous OpenSSL versions:
1051 * COMPILING existing applications
1053 Starting with version 1.1.0, OpenSSL hides a number of structures
1054 that were previously open. This includes all internal libssl
1055 structures and a number of EVP types. Accessor functions have
1056 been added to allow controlled access to the structures' data.
1058 This means that some software needs to be rewritten to adapt to
1059 the new ways of doing things. This often amounts to allocating
1060 an instance of a structure explicitly where you could previously
1061 allocate them on the stack as automatic variables, and using the
1062 provided accessor functions where you would previously access a
1063 structure's field directly.
1065 Some APIs have changed as well. However, older APIs have been
1066 preserved when possible.
1068 Environment Variables
1069 ---------------------
1071 A number of environment variables can be used to provide additional control
1072 over the build process. Typically these should be defined prior to running
1073 config or Configure. Not all environment variables are relevant to all
1077 The name of the ar executable to use.
1080 Use a different build file name than the platform default
1081 ("Makefile" on Unix-like platforms, "makefile" on native Windows,
1082 "descrip.mms" on OpenVMS). This requires that there is a
1083 corresponding build file template. See Configurations/README
1084 for further information.
1087 The compiler to use. Configure will attempt to pick a default
1088 compiler for your platform but this choice can be overridden
1089 using this variable. Set it to the compiler executable you wish
1090 to use, e.g. "gcc" or "clang".
1093 This environment variable has the same meaning as for the
1094 "--cross-compile-prefix" Configure flag described above. If both
1095 are set then the Configure flag takes precedence.
1098 The name of the nm executable to use.
1100 OPENSSL_LOCAL_CONFIG_DIR
1101 OpenSSL comes with a database of information about how it
1102 should be built on different platforms as well as build file
1103 templates for those platforms. The database is comprised of
1104 ".conf" files in the Configurations directory. The build
1105 file templates reside there as well as ".tmpl" files. See the
1106 file Configurations/README for further information about the
1107 format of ".conf" files as well as information on the ".tmpl"
1109 In addition to the standard ".conf" and ".tmpl" files, it is
1110 possible to create your own ".conf" and ".tmpl" files and store
1111 them locally, outside the OpenSSL source tree. This environment
1112 variable can be set to the directory where these files are held
1113 and will be considered by Configure before it looks in the
1114 standard directories.
1117 The name of the Perl executable to use when building OpenSSL.
1118 This variable is used in config script only. Configure on the
1119 other hand imposes the interpreter by which it itself was
1120 executed on the whole build procedure.
1123 The command string for the Perl executable to insert in the
1124 #! line of perl scripts that will be publicly installed.
1125 Default: /usr/bin/env perl
1126 Note: the value of this variable is added to the same scripts
1127 on all platforms, but it's only relevant on Unix-like platforms.
1130 The name of the rc executable to use. The default will be as
1131 defined for the target platform in the ".conf" file. If not
1132 defined then "windres" will be used. The WINDRES environment
1133 variable is synonymous to this. If both are defined then RC
1137 The name of the ranlib executable to use.
1145 The Configure script generates a Makefile in a format relevant to the specific
1146 platform. The Makefiles provide a number of targets that can be used. Not all
1147 targets may be available on all platforms. Only the most common targets are
1148 described here. Examine the Makefiles themselves for the full list.
1151 The target to build all the software components and
1155 Build all the software components.
1156 THIS IS THE DEFAULT TARGET.
1159 Build all documentation components.
1162 Remove all build artefacts and return the directory to a "clean"
1166 Rebuild the dependencies in the Makefiles. This is a legacy
1167 option that no longer needs to be used since OpenSSL 1.1.0.
1170 Install all OpenSSL components.
1173 Only install the OpenSSL software components.
1176 Only install the OpenSSL documentation components.
1179 Only install the OpenSSL man pages (Unix only).
1182 Only install the OpenSSL html documentation.
1185 Prints a list of all the self test names.
1188 Build and run the OpenSSL self tests.
1191 Uninstall all OpenSSL components.
1195 Re-run the configuration process, as exactly as the last time
1199 This is a developer option. If you are developing a patch for
1200 OpenSSL you may need to use this if you want to update
1201 automatically generated files; add new error codes or add new
1202 (or change the visibility of) public API functions. (Unix only).
1207 The make variable TESTS supports a versatile set of space separated tokens
1208 with which you can specify a set of tests to be performed. With a "current
1209 set of tests" in mind, initially being empty, here are the possible tokens:
1211 alltests The current set of tests becomes the whole set of available
1212 tests (as listed when you do 'make list-tests' or similar).
1213 xxx Adds the test 'xxx' to the current set of tests.
1214 -xxx Removes 'xxx' from the current set of tests. If this is the
1215 first token in the list, the current set of tests is first
1216 assigned the whole set of available tests, effectively making
1217 this token equivalent to TESTS="alltests -xxx".
1218 nn Adds the test group 'nn' (which is a number) to the current
1220 -nn Removes the test group 'nn' from the current set of tests.
1221 If this is the first token in the list, the current set of
1222 tests is first assigned the whole set of available tests,
1223 effectively making this token equivalent to
1224 TESTS="alltests -xxx".
1226 Also, all tokens except for "alltests" may have wildcards, such as *.
1227 (on Unix and Windows, BSD style wildcards are supported, while on VMS,
1228 it's VMS style wildcards)
1230 Example: All tests except for the fuzz tests:
1232 $ make TESTS=-test_fuzz test
1234 or (if you want to be explicit)
1236 $ make TESTS='alltests -test_fuzz' test
1238 Example: All tests that have a name starting with "test_ssl" but not those
1239 starting with "test_ssl_":
1241 $ make TESTS='test_ssl* -test_ssl_*' test
1243 Example: Only test group 10:
1247 Example: All tests except the slow group (group 99):
1251 Example: All tests in test groups 80 to 99 except for tests in group 90:
1253 $ make TESTS='[89]? -90'
1255 To stochastically verify that the algorithm that produces uniformly distributed
1256 random numbers is operating correctly (with a false positive rate of 0.01%):
1258 $ ./util/shlib_wrap.sh test/bntest -stochastic
1260 Note on multi-threading
1261 -----------------------
1263 For some systems, the OpenSSL Configure script knows what compiler options
1264 are needed to generate a library that is suitable for multi-threaded
1265 applications. On these systems, support for multi-threading is enabled
1266 by default; use the "no-threads" option to disable (this should never be
1269 On other systems, to enable support for multi-threading, you will have
1270 to specify at least two options: "threads", and a system-dependent option.
1271 (The latter is "-D_REENTRANT" on various systems.) The default in this
1272 case, obviously, is not to include support for multi-threading (but
1273 you can still use "no-threads" to suppress an annoying warning message
1274 from the Configure script.)
1276 OpenSSL provides built-in support for two threading models: pthreads (found on
1277 most UNIX/Linux systems), and Windows threads. No other threading models are
1278 supported. If your platform does not provide pthreads or Windows threads then
1279 you should Configure with the "no-threads" option.
1281 Notes on shared libraries
1282 -------------------------
1284 For most systems the OpenSSL Configure script knows what is needed to
1285 build shared libraries for libcrypto and libssl. On these systems
1286 the shared libraries will be created by default. This can be suppressed and
1287 only static libraries created by using the "no-shared" option. On systems
1288 where OpenSSL does not know how to build shared libraries the "no-shared"
1289 option will be forced and only static libraries will be created.
1291 Shared libraries are named a little differently on different platforms.
1292 One way or another, they all have the major OpenSSL version number as
1293 part of the file name, i.e. for OpenSSL 1.1.x, 1.1 is somehow part of
1296 On most POSIX platforms, shared libraries are named libcrypto.so.1.1
1299 on Cygwin, shared libraries are named cygcrypto-1.1.dll and cygssl-1.1.dll
1300 with import libraries libcrypto.dll.a and libssl.dll.a.
1302 On Windows build with MSVC or using MingW, shared libraries are named
1303 libcrypto-1_1.dll and libssl-1_1.dll for 32-bit Windows, libcrypto-1_1-x64.dll
1304 and libssl-1_1-x64.dll for 64-bit x86_64 Windows, and libcrypto-1_1-ia64.dll
1305 and libssl-1_1-ia64.dll for IA64 Windows. With MSVC, the import libraries
1306 are named libcrypto.lib and libssl.lib, while with MingW, they are named
1307 libcrypto.dll.a and libssl.dll.a.
1309 On VMS, shareable images (VMS speak for shared libraries) are named
1310 ossl$libcrypto0101_shr.exe and ossl$libssl0101_shr.exe. However, when
1311 OpenSSL is specifically built for 32-bit pointers, the shareable images
1312 are named ossl$libcrypto0101_shr32.exe and ossl$libssl0101_shr32.exe
1313 instead, and when built for 64-bit pointers, they are named
1314 ossl$libcrypto0101_shr64.exe and ossl$libssl0101_shr64.exe.
1316 Note on random number generation
1317 --------------------------------
1319 Availability of cryptographically secure random numbers is required for
1320 secret key generation. OpenSSL provides several options to seed the
1321 internal CSPRNG. If not properly seeded, the internal CSPRNG will refuse
1322 to deliver random bytes and a "PRNG not seeded error" will occur.
1324 The seeding method can be configured using the --with-rand-seed option,
1325 which can be used to specify a comma separated list of seed methods.
1326 However in most cases OpenSSL will choose a suitable default method,
1327 so it is not necessary to explicitly provide this option. Note also
1328 that not all methods are available on all platforms.
1330 I) On operating systems which provide a suitable randomness source (in
1331 form of a system call or system device), OpenSSL will use the optimal
1332 available method to seed the CSPRNG from the operating system's
1333 randomness sources. This corresponds to the option --with-rand-seed=os.
1335 II) On systems without such a suitable randomness source, automatic seeding
1336 and reseeding is disabled (--with-rand-seed=none) and it may be necessary
1337 to install additional support software to obtain a random seed and reseed
1338 the CSPRNG manually. Please check out the manual pages for RAND_add(),
1339 RAND_bytes(), RAND_egd(), and the FAQ for more information.
projects / openssl.git / blob