5 Changes between 1.0.1 and 1.1.0 [xx XXX xxxx]
7 *) Transparently support X9.42 DH parameters when calling
8 PEM_read_bio_DHparameters. This means existing applications can handle
9 the new parameter format automatically.
12 *) Initial experimental support for X9.42 DH parameter format: mainly
13 to support use of 'q' parameter for RFC5114 parameters.
16 *) Add DH parameters from RFC5114 including test data to dhtest.
19 *) Update fips_test_suite to support multiple command line options. New
20 test to induce all self test errors in sequence and check expected
24 *) Add FIPS_{rsa,dsa,ecdsa}_{sign,verify} functions which digest and
25 sign or verify all in one operation.
28 *) Add fips_algvs: a multicall fips utility incorporaing all the algorithm
29 test programs and fips_test_suite. Includes functionality to parse
30 the minimal script output of fipsalgest.pl directly.
33 *) Add authorisation parameter to FIPS_module_mode_set().
36 *) Add FIPS selftest for ECDH algorithm using P-224 and B-233 curves.
39 *) Use separate DRBG fields for internal and external flags. New function
40 FIPS_drbg_health_check() to perform on demand health checking. Add
41 generation tests to fips_test_suite with reduced health check interval to
42 demonstrate periodic health checking. Add "nodh" option to
43 fips_test_suite to skip very slow DH test.
46 *) New function FIPS_get_cipherbynid() to lookup FIPS supported ciphers
50 *) More extensive health check for DRBG checking many more failure modes.
51 New function FIPS_selftest_drbg_all() to handle every possible DRBG
52 combination: call this in fips_test_suite.
55 *) Add support for Dual EC DRBG from SP800-90. Update DRBG algorithm test
56 and POST to handle Dual EC cases.
59 *) Add support for canonical generation of DSA parameter 'g'. See
62 *) Add support for HMAC DRBG from SP800-90. Update DRBG algorithm test and
63 POST to handle HMAC cases.
66 *) Add functions FIPS_module_version() and FIPS_module_version_text()
67 to return numberical and string versions of the FIPS module number.
70 *) Rename FIPS_mode_set and FIPS_mode to FIPS_module_mode_set and
71 FIPS_module_mode. FIPS_mode and FIPS_mode_set will be implmeneted
72 outside the validated module in the FIPS capable OpenSSL.
75 *) Minor change to DRBG entropy callback semantics. In some cases
76 there is no mutiple of the block length between min_len and
77 max_len. Allow the callback to return more than max_len bytes
78 of entropy but discard any extra: it is the callback's responsibility
79 to ensure that the extra data discarded does not impact the
80 requested amount of entropy.
83 *) Add PRNG security strength checks to RSA, DSA and ECDSA using
84 information in FIPS186-3, SP800-57 and SP800-131A.
87 *) CCM support via EVP. Interface is very similar to GCM case except we
88 must supply all data in one chunk (i.e. no update, final) and the
89 message length must be supplied if AAD is used. Add algorithm test
93 *) Initial version of POST overhaul. Add POST callback to allow the status
94 of POST to be monitored and/or failures induced. Modify fips_test_suite
95 to use callback. Always run all selftests even if one fails.
98 *) XTS support including algorithm test driver in the fips_gcmtest program.
99 Note: this does increase the maximum key length from 32 to 64 bytes but
100 there should be no binary compatibility issues as existing applications
101 will never use XTS mode.
104 *) Extensive reorganisation of FIPS PRNG behaviour. Remove all dependencies
105 to OpenSSL RAND code and replace with a tiny FIPS RAND API which also
106 performs algorithm blocking for unapproved PRNG types. Also do not
107 set PRNG type in FIPS_mode_set(): leave this to the application.
108 Add default OpenSSL DRBG handling: sets up FIPS PRNG and seeds with
109 the standard OpenSSL PRNG: set additional data to a date time vector.
112 *) Rename old X9.31 PRNG functions of the form FIPS_rand* to FIPS_x931*.
113 This shouldn't present any incompatibility problems because applications
114 shouldn't be using these directly and any that are will need to rethink
115 anyway as the X9.31 PRNG is now deprecated by FIPS 140-2
118 *) Extensive self tests and health checking required by SP800-90 DRBG.
119 Remove strength parameter from FIPS_drbg_instantiate and always
120 instantiate at maximum supported strength.
123 *) Add ECDH code to fips module and fips_ecdhvs for primitives only testing.
126 *) New algorithm test program fips_dhvs to handle DH primitives only testing.
129 *) New function DH_compute_key_padded() to compute a DH key and pad with
130 leading zeroes if needed: this complies with SP800-56A et al.
133 *) Initial implementation of SP800-90 DRBGs for Hash and CTR. Not used by
134 anything, incomplete, subject to change and largely untested at present.
137 *) Modify fipscanisteronly build option to only build the necessary object
138 files by filtering FIPS_EX_OBJ through a perl script in crypto/Makefile.
141 *) Add experimental option FIPSSYMS to give all symbols in
142 fipscanister.o and FIPS or fips prefix. This will avoid
143 conflicts with future versions of OpenSSL. Add perl script
144 util/fipsas.pl to preprocess assembly language source files
145 and rename any affected symbols.
148 *) Add selftest checks and algorithm block of non-fips algorithms in
149 FIPS mode. Remove DES2 from selftests.
152 *) Add ECDSA code to fips module. Add tiny fips_ecdsa_check to just
153 return internal method without any ENGINE dependencies. Add new
154 tiny fips sign and verify functions.
157 *) New build option no-ec2m to disable characteristic 2 code.
160 *) New build option "fipscanisteronly". This only builds fipscanister.o
161 and (currently) associated fips utilities. Uses the file Makefile.fips
162 instead of Makefile.org as the prototype.
165 *) Add some FIPS mode restrictions to GCM. Add internal IV generator.
166 Update fips_gcmtest to use IV generator.
169 *) Initial, experimental EVP support for AES-GCM. AAD can be input by
170 setting output buffer to NULL. The *Final function must be
171 called although it will not retrieve any additional data. The tag
172 can be set or retrieved with a ctrl. The IV length is by default 12
173 bytes (96 bits) but can be set to an alternative value. If the IV
174 length exceeds the maximum IV length (currently 16 bytes) it cannot be
178 *) New flag in ciphers: EVP_CIPH_FLAG_CUSTOM_CIPHER. This means the
179 underlying do_cipher function handles all cipher semantics itself
180 including padding and finalisation. This is useful if (for example)
181 an ENGINE cipher handles block padding itself. The behaviour of
182 do_cipher is subtly changed if this flag is set: the return value
183 is the number of characters written to the output buffer (zero is
184 no longer an error code) or a negative error code. Also if the
185 input buffer is NULL and length 0 finalisation should be performed.
188 *) If a candidate issuer certificate is already part of the constructed
189 path ignore it: new debug notification X509_V_ERR_PATH_LOOP for this case.
192 *) Improve forward-security support: add functions
194 void SSL_CTX_set_not_resumable_session_callback(SSL_CTX *ctx, int (*cb)(SSL *ssl, int is_forward_secure))
195 void SSL_set_not_resumable_session_callback(SSL *ssl, int (*cb)(SSL *ssl, int is_forward_secure))
197 for use by SSL/TLS servers; the callback function will be called whenever a
198 new session is created, and gets to decide whether the session may be
199 cached to make it resumable (return 0) or not (return 1). (As by the
200 SSL/TLS protocol specifications, the session_id sent by the server will be
201 empty to indicate that the session is not resumable; also, the server will
202 not generate RFC 4507 (RFC 5077) session tickets.)
204 A simple reasonable callback implementation is to return is_forward_secure.
205 This parameter will be set to 1 or 0 depending on the ciphersuite selected
206 by the SSL/TLS server library, indicating whether it can provide forward
208 [Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
210 *) New function OPENSSL_gmtime_diff to find the difference in days
211 and seconds between two tm structures. This will be used to provide
212 additional functionality for ASN1_TIME.
215 *) Add -trusted_first option which attempts to find certificates in the
216 trusted store even if an untrusted chain is also supplied.
219 *) Initial experimental support for explicitly trusted non-root CAs.
220 OpenSSL still tries to build a complete chain to a root but if an
221 intermediate CA has a trust setting included that is used. The first
222 setting is used: whether to trust or reject.
225 *) New -verify_name option in command line utilities to set verification
229 *) Initial CMAC implementation. WARNING: EXPERIMENTAL, API MAY CHANGE.
230 Add CMAC pkey methods.
233 *) Experimental regnegotiation in s_server -www mode. If the client
234 browses /reneg connection is renegotiated. If /renegcert it is
235 renegotiated requesting a certificate.
238 *) Add an "external" session cache for debugging purposes to s_server. This
239 should help trace issues which normally are only apparent in deployed
240 multi-process servers.
243 *) Extensive audit of libcrypto with DEBUG_UNUSED. Fix many cases where
244 return value is ignored. NB. The functions RAND_add(), RAND_seed(),
245 BIO_set_cipher() and some obscure PEM functions were changed so they
246 can now return an error. The RAND changes required a change to the
247 RAND_METHOD structure.
250 *) New macro __owur for "OpenSSL Warn Unused Result". This makes use of
251 a gcc attribute to warn if the result of a function is ignored. This
252 is enable if DEBUG_UNUSED is set. Add to several functions in evp.h
253 whose return value is often ignored.
256 Changes between 1.0.0f and 1.0.1 [xx XXX xxxx]
258 *) Add support for TLS/DTLS heartbeats.
259 [Robin Seggelmann <seggelmann@fh-muenster.de>]
261 *) Add support for SCTP.
262 [Robin Seggelmann <seggelmann@fh-muenster.de>]
264 *) Improved PRNG seeding for VOS.
265 [Paul Green <Paul.Green@stratus.com>]
267 *) Extensive assembler packs updates, most notably:
269 - x86[_64]: AES-NI, PCLMULQDQ, RDRAND support;
270 - x86[_64]: SSSE3 support (SHA1, vector-permutation AES);
271 - x86_64: bit-sliced AES implementation;
272 - ARM: NEON support, contemporary platforms optimizations;
273 - s390x: z196 support;
274 - *: GHASH and GF(2^m) multiplication implementations;
278 *) Make TLS-SRP code conformant with RFC 5054 API cleanup
279 (removal of unnecessary code)
280 [Peter Sylvester <peter.sylvester@edelweb.fr>]
282 *) Add -attime option to openssl utilities.
283 [Peter Eckersley <pde@eff.org>, Ben Laurie and Steve Henson]
285 *) Add TLS key material exporter from RFC 5705.
288 *) Add DTLS-SRTP negotiation from RFC 5764.
291 *) Add Next Protocol Negotiation,
292 http://tools.ietf.org/html/draft-agl-tls-nextprotoneg-00. Can be
293 disabled with a no-npn flag to config or Configure. Code donated
295 [Adam Langley <agl@google.com> and Ben Laurie]
297 *) Add optional 64-bit optimized implementations of elliptic curves NIST-P224,
298 NIST-P256, NIST-P521, with constant-time single point multiplication on
299 typical inputs. Compiler support for the nonstandard type __uint128_t is
300 required to use this (present in gcc 4.4 and later, for 64-bit builds).
301 Code made available under Apache License version 2.0.
303 Specify "enable-ec_nistp_64_gcc_128" on the Configure (or config) command
304 line to include this in your build of OpenSSL, and run "make depend" (or
305 "make update"). This enables the following EC_METHODs:
307 EC_GFp_nistp224_method()
308 EC_GFp_nistp256_method()
309 EC_GFp_nistp521_method()
311 EC_GROUP_new_by_curve_name() will automatically use these (while
312 EC_GROUP_new_curve_GFp() currently prefers the more flexible
314 [Emilia Käsper, Adam Langley, Bodo Moeller (Google)]
316 *) Use type ossl_ssize_t instad of ssize_t which isn't available on
317 all platforms. Move ssize_t definition from e_os.h to the public
318 header file e_os2.h as it now appears in public header file cms.h
321 *) New -sigopt option to the ca, req and x509 utilities. Additional
322 signature parameters can be passed using this option and in
326 *) Add RSA PSS signing function. This will generate and set the
327 appropriate AlgorithmIdentifiers for PSS based on those in the
328 corresponding EVP_MD_CTX structure. No application support yet.
331 *) Support for companion algorithm specific ASN1 signing routines.
332 New function ASN1_item_sign_ctx() signs a pre-initialised
333 EVP_MD_CTX structure and sets AlgorithmIdentifiers based on
334 the appropriate parameters.
337 *) Add new algorithm specific ASN1 verification initialisation function
338 to EVP_PKEY_ASN1_METHOD: this is not in EVP_PKEY_METHOD since the ASN1
339 handling will be the same no matter what EVP_PKEY_METHOD is used.
340 Add a PSS handler to support verification of PSS signatures: checked
341 against a number of sample certificates.
344 *) Add signature printing for PSS. Add PSS OIDs.
345 [Steve Henson, Martin Kaiser <lists@kaiser.cx>]
347 *) Add algorithm specific signature printing. An individual ASN1 method
348 can now print out signatures instead of the standard hex dump.
350 More complex signatures (e.g. PSS) can print out more meaningful
351 information. Include DSA version that prints out the signature
355 *) Password based recipient info support for CMS library: implementing
359 *) Split password based encryption into PBES2 and PBKDF2 functions. This
360 neatly separates the code into cipher and PBE sections and is required
361 for some algorithms that split PBES2 into separate pieces (such as
365 *) Session-handling fixes:
366 - Fix handling of connections that are resuming with a session ID,
367 but also support Session Tickets.
368 - Fix a bug that suppressed issuing of a new ticket if the client
369 presented a ticket with an expired session.
370 - Try to set the ticket lifetime hint to something reasonable.
371 - Make tickets shorter by excluding irrelevant information.
372 - On the client side, don't ignore renewed tickets.
373 [Adam Langley, Bodo Moeller (Google)]
375 *) Fix PSK session representation.
378 *) Add RC4-MD5 and AESNI-SHA1 "stitched" implementations.
380 This work was sponsored by Intel.
383 *) Add GCM support to TLS library. Some custom code is needed to split
384 the IV between the fixed (from PRF) and explicit (from TLS record)
385 portions. This adds all GCM ciphersuites supported by RFC5288 and
386 RFC5289. Generalise some AES* cipherstrings to inlclude GCM and
387 add a special AESGCM string for GCM only.
390 *) Expand range of ctrls for AES GCM. Permit setting invocation
391 field on decrypt and retrieval of invocation field only on encrypt.
394 *) Add HMAC ECC ciphersuites from RFC5289. Include SHA384 PRF support.
395 As required by RFC5289 these ciphersuites cannot be used if for
396 versions of TLS earlier than 1.2.
399 *) For FIPS capable OpenSSL interpret a NULL default public key method
400 as unset and return the appopriate default but do *not* set the default.
401 This means we can return the appopriate method in applications that
402 swicth between FIPS and non-FIPS modes.
405 *) Redirect HMAC and CMAC operations to FIPS module in FIPS mode. If an
406 ENGINE is used then we cannot handle that in the FIPS module so we
407 keep original code iff non-FIPS operations are allowed.
410 *) Add -attime option to openssl verify.
411 [Peter Eckersley <pde@eff.org> and Ben Laurie]
413 *) Redirect DSA and DH operations to FIPS module in FIPS mode.
416 *) Redirect ECDSA and ECDH operations to FIPS module in FIPS mode. Also use
417 FIPS EC methods unconditionally for now.
420 *) New build option no-ec2m to disable characteristic 2 code.
423 *) Backport libcrypto audit of return value checking from 1.1.0-dev; not
424 all cases can be covered as some introduce binary incompatibilities.
427 *) Redirect RSA operations to FIPS module including keygen,
428 encrypt, decrypt, sign and verify. Block use of non FIPS RSA methods.
431 *) Add similar low level API blocking to ciphers.
434 *) Low level digest APIs are not approved in FIPS mode: any attempt
435 to use these will cause a fatal error. Applications that *really* want
436 to use them can use the private_* version instead.
439 *) Redirect cipher operations to FIPS module for FIPS builds.
442 *) Redirect digest operations to FIPS module for FIPS builds.
445 *) Update build system to add "fips" flag which will link in fipscanister.o
446 for static and shared library builds embedding a signature if needed.
449 *) Output TLS supported curves in preference order instead of numerical
450 order. This is currently hardcoded for the highest order curves first.
451 This should be configurable so applications can judge speed vs strength.
454 *) Add TLS v1.2 server support for client authentication.
457 *) Add support for FIPS mode in ssl library: disable SSLv3, non-FIPS ciphers
461 *) Functions FIPS_mode_set() and FIPS_mode() which call the underlying
462 FIPS modules versions.
465 *) Add TLS v1.2 client side support for client authentication. Keep cache
466 of handshake records longer as we don't know the hash algorithm to use
467 until after the certificate request message is received.
470 *) Initial TLS v1.2 client support. Add a default signature algorithms
471 extension including all the algorithms we support. Parse new signature
472 format in client key exchange. Relax some ECC signing restrictions for
473 TLS v1.2 as indicated in RFC5246.
476 *) Add server support for TLS v1.2 signature algorithms extension. Switch
477 to new signature format when needed using client digest preference.
478 All server ciphersuites should now work correctly in TLS v1.2. No client
479 support yet and no support for client certificates.
482 *) Initial TLS v1.2 support. Add new SHA256 digest to ssl code, switch
483 to SHA256 for PRF when using TLS v1.2 and later. Add new SHA256 based
484 ciphersuites. At present only RSA key exchange ciphersuites work with
485 TLS v1.2. Add new option for TLS v1.2 replacing the old and obsolete
486 SSL_OP_PKCS1_CHECK flags with SSL_OP_NO_TLSv1_2. New TLSv1.2 methods
487 and version checking.
490 *) New option OPENSSL_NO_SSL_INTERN. If an application can be compiled
491 with this defined it will not be affected by any changes to ssl internal
492 structures. Add several utility functions to allow openssl application
493 to work with OPENSSL_NO_SSL_INTERN defined.
497 [Tom Wu <tjw@cs.stanford.edu> and Ben Laurie]
499 *) Add functions to copy EVP_PKEY_METHOD and retrieve flags and id.
502 *) Permit abbreviated handshakes when renegotiating using the function
503 SSL_renegotiate_abbreviated().
504 [Robin Seggelmann <seggelmann@fh-muenster.de>]
506 *) Add call to ENGINE_register_all_complete() to
507 ENGINE_load_builtin_engines(), so some implementations get used
508 automatically instead of needing explicit application support.
511 *) Add support for TLS key exporter as described in RFC5705.
512 [Robin Seggelmann <seggelmann@fh-muenster.de>, Steve Henson]
514 *) Initial TLSv1.1 support. Since TLSv1.1 is very similar to TLS v1.0 only
515 a few changes are required:
517 Add SSL_OP_NO_TLSv1_1 flag.
519 Update version checking logic to handle version 1.1.
520 Add explicit IV handling (ported from DTLS code).
521 Add command line options to s_client/s_server.
524 Changes between 1.0.0e and 1.0.0f [xx XXX xxxx]
526 *) Fix ssl_ciph.c set-up race.
527 [Adam Langley (Google)]
529 *) Fix spurious failures in ecdsatest.c.
530 [Emilia Käsper (Google)]
532 *) Fix the BIO_f_buffer() implementation (which was mixing different
533 interpretations of the '..._len' fields).
534 [Adam Langley (Google)]
536 *) Fix handling of BN_BLINDING: now BN_BLINDING_invert_ex (rather than
537 BN_BLINDING_invert_ex) calls BN_BLINDING_update, ensuring that concurrent
538 threads won't reuse the same blinding coefficients.
540 This also avoids the need to obtain the CRYPTO_LOCK_RSA_BLINDING
541 lock to call BN_BLINDING_invert_ex, and avoids one use of
542 BN_BLINDING_update for each BN_BLINDING structure (previously,
543 the last update always remained unused).
544 [Emilia Käsper (Google)]
546 *) In ssl3_clear, preserve s3->init_extra along with s3->rbuf.
547 [Bob Buckholz (Google)]
549 Changes between 1.0.0d and 1.0.0e [6 Sep 2011]
551 *) Fix bug where CRLs with nextUpdate in the past are sometimes accepted
552 by initialising X509_STORE_CTX properly. (CVE-2011-3207)
553 [Kaspar Brand <ossl@velox.ch>]
555 *) Fix SSL memory handling for (EC)DH ciphersuites, in particular
556 for multi-threaded use of ECDH. (CVE-2011-3210)
557 [Adam Langley (Google)]
559 *) Fix x509_name_ex_d2i memory leak on bad inputs.
562 *) Remove hard coded ecdsaWithSHA1 signature tests in ssl code and check
563 signature public key algorithm by using OID xref utilities instead.
564 Before this you could only use some ECC ciphersuites with SHA1 only.
567 *) Add protection against ECDSA timing attacks as mentioned in the paper
568 by Billy Bob Brumley and Nicola Tuveri, see:
570 http://eprint.iacr.org/2011/232.pdf
572 [Billy Bob Brumley and Nicola Tuveri]
574 Changes between 1.0.0c and 1.0.0d [8 Feb 2011]
576 *) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
577 [Neel Mehta, Adam Langley, Bodo Moeller (Google)]
579 *) Fix bug in string printing code: if *any* escaping is enabled we must
580 escape the escape character (backslash) or the resulting string is
584 Changes between 1.0.0b and 1.0.0c [2 Dec 2010]
586 *) Disable code workaround for ancient and obsolete Netscape browsers
587 and servers: an attacker can use it in a ciphersuite downgrade attack.
588 Thanks to Martin Rex for discovering this bug. CVE-2010-4180
591 *) Fixed J-PAKE implementation error, originally discovered by
592 Sebastien Martini, further info and confirmation from Stefan
593 Arentz and Feng Hao. Note that this fix is a security fix. CVE-2010-4252
596 Changes between 1.0.0a and 1.0.0b [16 Nov 2010]
598 *) Fix extension code to avoid race conditions which can result in a buffer
599 overrun vulnerability: resumed sessions must not be modified as they can
600 be shared by multiple threads. CVE-2010-3864
603 *) Fix WIN32 build system to correctly link an ENGINE directory into
607 Changes between 1.0.0 and 1.0.0a [01 Jun 2010]
609 *) Check return value of int_rsa_verify in pkey_rsa_verifyrecover
611 [Steve Henson, Peter-Michael Hager <hager@dortmund.net>]
613 Changes between 0.9.8n and 1.0.0 [29 Mar 2010]
615 *) Add "missing" function EVP_CIPHER_CTX_copy(). This copies a cipher
616 context. The operation can be customised via the ctrl mechanism in
617 case ENGINEs want to include additional functionality.
620 *) Tolerate yet another broken PKCS#8 key format: private key value negative.
623 *) Add new -subject_hash_old and -issuer_hash_old options to x509 utility to
624 output hashes compatible with older versions of OpenSSL.
625 [Willy Weisz <weisz@vcpc.univie.ac.at>]
627 *) Fix compression algorithm handling: if resuming a session use the
628 compression algorithm of the resumed session instead of determining
629 it from client hello again. Don't allow server to change algorithm.
632 *) Add load_crls() function to apps tidying load_certs() too. Add option
633 to verify utility to allow additional CRLs to be included.
636 *) Update OCSP request code to permit adding custom headers to the request:
637 some responders need this.
640 *) The function EVP_PKEY_sign() returns <=0 on error: check return code
642 [Julia Lawall <julia@diku.dk>]
644 *) Update verify callback code in apps/s_cb.c and apps/verify.c, it
645 needlessly dereferenced structures, used obsolete functions and
646 didn't handle all updated verify codes correctly.
649 *) Disable MD2 in the default configuration.
652 *) In BIO_pop() and BIO_push() use the ctrl argument (which was NULL) to
653 indicate the initial BIO being pushed or popped. This makes it possible
654 to determine whether the BIO is the one explicitly called or as a result
655 of the ctrl being passed down the chain. Fix BIO_pop() and SSL BIOs so
656 it handles reference counts correctly and doesn't zero out the I/O bio
657 when it is not being explicitly popped. WARNING: applications which
658 included workarounds for the old buggy behaviour will need to be modified
659 or they could free up already freed BIOs.
662 *) Extend the uni2asc/asc2uni => OPENSSL_uni2asc/OPENSSL_asc2uni
663 renaming to all platforms (within the 0.9.8 branch, this was
664 done conditionally on Netware platforms to avoid a name clash).
665 [Guenter <lists@gknw.net>]
667 *) Add ECDHE and PSK support to DTLS.
668 [Michael Tuexen <tuexen@fh-muenster.de>]
670 *) Add CHECKED_STACK_OF macro to safestack.h, otherwise safestack can't
674 *) Add "missing" function EVP_MD_flags() (without this the only way to
675 retrieve a digest flags is by accessing the structure directly. Update
676 EVP_MD_do_all*() and EVP_CIPHER_do_all*() to include the name a digest
677 or cipher is registered as in the "from" argument. Print out all
678 registered digests in the dgst usage message instead of manually
679 attempting to work them out.
682 *) If no SSLv2 ciphers are used don't use an SSLv2 compatible client hello:
683 this allows the use of compression and extensions. Change default cipher
684 string to remove SSLv2 ciphersuites. This effectively avoids ancient SSLv2
685 by default unless an application cipher string requests it.
688 *) Alter match criteria in PKCS12_parse(). It used to try to use local
689 key ids to find matching certificates and keys but some PKCS#12 files
690 don't follow the (somewhat unwritten) rules and this strategy fails.
691 Now just gather all certificates together and the first private key
692 then look for the first certificate that matches the key.
695 *) Support use of registered digest and cipher names for dgst and cipher
696 commands instead of having to add each one as a special case. So now
703 openssl dgst -sha256 foo
705 and this works for ENGINE based algorithms too.
709 *) Update Gost ENGINE to support parameter files.
710 [Victor B. Wagner <vitus@cryptocom.ru>]
712 *) Support GeneralizedTime in ca utility.
713 [Oliver Martin <oliver@volatilevoid.net>, Steve Henson]
715 *) Enhance the hash format used for certificate directory links. The new
716 form uses the canonical encoding (meaning equivalent names will work
717 even if they aren't identical) and uses SHA1 instead of MD5. This form
718 is incompatible with the older format and as a result c_rehash should
719 be used to rebuild symbolic links.
722 *) Make PKCS#8 the default write format for private keys, replacing the
723 traditional format. This form is standardised, more secure and doesn't
724 include an implicit MD5 dependency.
727 *) Add a $gcc_devteam_warn option to Configure. The idea is that any code
728 committed to OpenSSL should pass this lot as a minimum.
731 *) Add session ticket override functionality for use by EAP-FAST.
732 [Jouni Malinen <j@w1.fi>]
734 *) Modify HMAC functions to return a value. Since these can be implemented
735 in an ENGINE errors can occur.
738 *) Type-checked OBJ_bsearch_ex.
741 *) Type-checked OBJ_bsearch. Also some constification necessitated
742 by type-checking. Still to come: TXT_DB, bsearch(?),
743 OBJ_bsearch_ex, qsort, CRYPTO_EX_DATA, ASN1_VALUE, ASN1_STRING,
747 *) New function OPENSSL_gmtime_adj() to add a specific number of days and
748 seconds to a tm structure directly, instead of going through OS
749 specific date routines. This avoids any issues with OS routines such
750 as the year 2038 bug. New *_adj() functions for ASN1 time structures
751 and X509_time_adj_ex() to cover the extended range. The existing
752 X509_time_adj() is still usable and will no longer have any date issues.
755 *) Delta CRL support. New use deltas option which will attempt to locate
756 and search any appropriate delta CRLs available.
758 This work was sponsored by Google.
761 *) Support for CRLs partitioned by reason code. Reorganise CRL processing
762 code and add additional score elements. Validate alternate CRL paths
763 as part of the CRL checking and indicate a new error "CRL path validation
764 error" in this case. Applications wanting additional details can use
765 the verify callback and check the new "parent" field. If this is not
766 NULL CRL path validation is taking place. Existing applications wont
767 see this because it requires extended CRL support which is off by
770 This work was sponsored by Google.
773 *) Support for freshest CRL extension.
775 This work was sponsored by Google.
778 *) Initial indirect CRL support. Currently only supported in the CRLs
779 passed directly and not via lookup. Process certificate issuer
780 CRL entry extension and lookup CRL entries by bother issuer name
781 and serial number. Check and process CRL issuer entry in IDP extension.
783 This work was sponsored by Google.
786 *) Add support for distinct certificate and CRL paths. The CRL issuer
787 certificate is validated separately in this case. Only enabled if
788 an extended CRL support flag is set: this flag will enable additional
789 CRL functionality in future.
791 This work was sponsored by Google.
794 *) Add support for policy mappings extension.
796 This work was sponsored by Google.
799 *) Fixes to pathlength constraint, self issued certificate handling,
800 policy processing to align with RFC3280 and PKITS tests.
802 This work was sponsored by Google.
805 *) Support for name constraints certificate extension. DN, email, DNS
806 and URI types are currently supported.
808 This work was sponsored by Google.
811 *) To cater for systems that provide a pointer-based thread ID rather
812 than numeric, deprecate the current numeric thread ID mechanism and
813 replace it with a structure and associated callback type. This
814 mechanism allows a numeric "hash" to be extracted from a thread ID in
815 either case, and on platforms where pointers are larger than 'long',
816 mixing is done to help ensure the numeric 'hash' is usable even if it
817 can't be guaranteed unique. The default mechanism is to use "&errno"
818 as a pointer-based thread ID to distinguish between threads.
820 Applications that want to provide their own thread IDs should now use
821 CRYPTO_THREADID_set_callback() to register a callback that will call
822 either CRYPTO_THREADID_set_numeric() or CRYPTO_THREADID_set_pointer().
824 Note that ERR_remove_state() is now deprecated, because it is tied
825 to the assumption that thread IDs are numeric. ERR_remove_state(0)
826 to free the current thread's error state should be replaced by
827 ERR_remove_thread_state(NULL).
829 (This new approach replaces the functions CRYPTO_set_idptr_callback(),
830 CRYPTO_get_idptr_callback(), and CRYPTO_thread_idptr() that existed in
831 OpenSSL 0.9.9-dev between June 2006 and August 2008. Also, if an
832 application was previously providing a numeric thread callback that
833 was inappropriate for distinguishing threads, then uniqueness might
834 have been obtained with &errno that happened immediately in the
835 intermediate development versions of OpenSSL; this is no longer the
836 case, the numeric thread callback will now override the automatic use
838 [Geoff Thorpe, with help from Bodo Moeller]
840 *) Initial support for different CRL issuing certificates. This covers a
841 simple case where the self issued certificates in the chain exist and
842 the real CRL issuer is higher in the existing chain.
844 This work was sponsored by Google.
847 *) Removed effectively defunct crypto/store from the build.
850 *) Revamp of STACK to provide stronger type-checking. Still to come:
851 TXT_DB, bsearch(?), OBJ_bsearch, qsort, CRYPTO_EX_DATA, ASN1_VALUE,
852 ASN1_STRING, CONF_VALUE.
855 *) Add a new SSL_MODE_RELEASE_BUFFERS mode flag to release unused buffer
856 RAM on SSL connections. This option can save about 34k per idle SSL.
859 *) Revamp of LHASH to provide stronger type-checking. Still to come:
860 STACK, TXT_DB, bsearch, qsort.
863 *) Initial support for Cryptographic Message Syntax (aka CMS) based
864 on RFC3850, RFC3851 and RFC3852. New cms directory and cms utility,
865 support for data, signedData, compressedData, digestedData and
866 encryptedData, envelopedData types included. Scripts to check against
867 RFC4134 examples draft and interop and consistency checks of many
868 content types and variants.
871 *) Add options to enc utility to support use of zlib compression BIO.
874 *) Extend mk1mf to support importing of options and assembly language
875 files from Configure script, currently only included in VC-WIN32.
876 The assembly language rules can now optionally generate the source
877 files from the associated perl scripts.
880 *) Implement remaining functionality needed to support GOST ciphersuites.
881 Interop testing has been performed using CryptoPro implementations.
882 [Victor B. Wagner <vitus@cryptocom.ru>]
884 *) s390x assembler pack.
887 *) ARMv4 assembler pack. ARMv4 refers to v4 and later ISA, not CPU
891 *) Implement Opaque PRF Input TLS extension as specified in
892 draft-rescorla-tls-opaque-prf-input-00.txt. Since this is not an
893 official specification yet and no extension type assignment by
894 IANA exists, this extension (for now) will have to be explicitly
895 enabled when building OpenSSL by providing the extension number
896 to use. For example, specify an option
898 -DTLSEXT_TYPE_opaque_prf_input=0x9527
900 to the "config" or "Configure" script to enable the extension,
901 assuming extension number 0x9527 (which is a completely arbitrary
902 and unofficial assignment based on the MD5 hash of the Internet
903 Draft). Note that by doing so, you potentially lose
904 interoperability with other TLS implementations since these might
905 be using the same extension number for other purposes.
907 SSL_set_tlsext_opaque_prf_input(ssl, src, len) is used to set the
908 opaque PRF input value to use in the handshake. This will create
909 an interal copy of the length-'len' string at 'src', and will
910 return non-zero for success.
912 To get more control and flexibility, provide a callback function
915 SSL_CTX_set_tlsext_opaque_prf_input_callback(ctx, cb)
916 SSL_CTX_set_tlsext_opaque_prf_input_callback_arg(ctx, arg)
920 int (*cb)(SSL *, void *peerinput, size_t len, void *arg);
923 Callback function 'cb' will be called in handshakes, and is
924 expected to use SSL_set_tlsext_opaque_prf_input() as appropriate.
925 Argument 'arg' is for application purposes (the value as given to
926 SSL_CTX_set_tlsext_opaque_prf_input_callback_arg() will directly
927 be provided to the callback function). The callback function
928 has to return non-zero to report success: usually 1 to use opaque
929 PRF input just if possible, or 2 to enforce use of the opaque PRF
930 input. In the latter case, the library will abort the handshake
931 if opaque PRF input is not successfully negotiated.
933 Arguments 'peerinput' and 'len' given to the callback function
934 will always be NULL and 0 in the case of a client. A server will
935 see the client's opaque PRF input through these variables if
936 available (NULL and 0 otherwise). Note that if the server
937 provides an opaque PRF input, the length must be the same as the
938 length of the client's opaque PRF input.
940 Note that the callback function will only be called when creating
941 a new session (session resumption can resume whatever was
942 previously negotiated), and will not be called in SSL 2.0
943 handshakes; thus, SSL_CTX_set_options(ctx, SSL_OP_NO_SSLv2) or
944 SSL_set_options(ssl, SSL_OP_NO_SSLv2) is especially recommended
945 for applications that need to enforce opaque PRF input.
949 *) Update ssl code to support digests other than SHA1+MD5 for handshake
952 [Victor B. Wagner <vitus@cryptocom.ru>]
954 *) Add RFC4507 support to OpenSSL. This includes the corrections in
955 RFC4507bis. The encrypted ticket format is an encrypted encoded
956 SSL_SESSION structure, that way new session features are automatically
959 If a client application caches session in an SSL_SESSION structure
960 support is transparent because tickets are now stored in the encoded
963 The SSL_CTX structure automatically generates keys for ticket
964 protection in servers so again support should be possible
965 with no application modification.
967 If a client or server wishes to disable RFC4507 support then the option
968 SSL_OP_NO_TICKET can be set.
970 Add a TLS extension debugging callback to allow the contents of any client
971 or server extensions to be examined.
973 This work was sponsored by Google.
976 *) Final changes to avoid use of pointer pointer casts in OpenSSL.
977 OpenSSL should now compile cleanly on gcc 4.2
978 [Peter Hartley <pdh@utter.chaos.org.uk>, Steve Henson]
980 *) Update SSL library to use new EVP_PKEY MAC API. Include generic MAC
981 support including streaming MAC support: this is required for GOST
983 [Victor B. Wagner <vitus@cryptocom.ru>, Steve Henson]
985 *) Add option -stream to use PKCS#7 streaming in smime utility. New
986 function i2d_PKCS7_bio_stream() and PEM_write_PKCS7_bio_stream()
987 to output in BER and PEM format.
990 *) Experimental support for use of HMAC via EVP_PKEY interface. This
991 allows HMAC to be handled via the EVP_DigestSign*() interface. The
992 EVP_PKEY "key" in this case is the HMAC key, potentially allowing
993 ENGINE support for HMAC keys which are unextractable. New -mac and
994 -macopt options to dgst utility.
997 *) New option -sigopt to dgst utility. Update dgst to use
998 EVP_Digest{Sign,Verify}*. These two changes make it possible to use
999 alternative signing paramaters such as X9.31 or PSS in the dgst
1003 *) Change ssl_cipher_apply_rule(), the internal function that does
1004 the work each time a ciphersuite string requests enabling
1005 ("foo+bar"), moving ("+foo+bar"), disabling ("-foo+bar", or
1006 removing ("!foo+bar") a class of ciphersuites: Now it maintains
1007 the order of disabled ciphersuites such that those ciphersuites
1008 that most recently went from enabled to disabled not only stay
1009 in order with respect to each other, but also have higher priority
1010 than other disabled ciphersuites the next time ciphersuites are
1013 This means that you can now say, e.g., "PSK:-PSK:HIGH" to enable
1014 the same ciphersuites as with "HIGH" alone, but in a specific
1015 order where the PSK ciphersuites come first (since they are the
1016 most recently disabled ciphersuites when "HIGH" is parsed).
1018 Also, change ssl_create_cipher_list() (using this new
1019 funcionality) such that between otherwise identical
1020 cihpersuites, ephemeral ECDH is preferred over ephemeral DH in
1024 *) Change ssl_create_cipher_list() so that it automatically
1025 arranges the ciphersuites in reasonable order before starting
1026 to process the rule string. Thus, the definition for "DEFAULT"
1027 (SSL_DEFAULT_CIPHER_LIST) now is just "ALL:!aNULL:!eNULL", but
1028 remains equivalent to "AES:ALL:!aNULL:!eNULL:+aECDH:+kRSA:+RC4:@STRENGTH".
1029 This makes it much easier to arrive at a reasonable default order
1030 in applications for which anonymous ciphers are OK (meaning
1031 that you can't actually use DEFAULT).
1032 [Bodo Moeller; suggested by Victor Duchovni]
1034 *) Split the SSL/TLS algorithm mask (as used for ciphersuite string
1035 processing) into multiple integers instead of setting
1036 "SSL_MKEY_MASK" bits, "SSL_AUTH_MASK" bits, "SSL_ENC_MASK",
1037 "SSL_MAC_MASK", and "SSL_SSL_MASK" bits all in a single integer.
1038 (These masks as well as the individual bit definitions are hidden
1039 away into the non-exported interface ssl/ssl_locl.h, so this
1040 change to the definition of the SSL_CIPHER structure shouldn't
1041 affect applications.) This give us more bits for each of these
1042 categories, so there is no longer a need to coagulate AES128 and
1043 AES256 into a single algorithm bit, and to coagulate Camellia128
1044 and Camellia256 into a single algorithm bit, which has led to all
1047 Thus, among other things, the kludge introduced in 0.9.7m and
1048 0.9.8e for masking out AES256 independently of AES128 or masking
1049 out Camellia256 independently of AES256 is not needed here in 0.9.9.
1051 With the change, we also introduce new ciphersuite aliases that
1052 so far were missing: "AES128", "AES256", "CAMELLIA128", and
1056 *) Add support for dsa-with-SHA224 and dsa-with-SHA256.
1057 Use the leftmost N bytes of the signature input if the input is
1058 larger than the prime q (with N being the size in bytes of q).
1061 *) Very *very* experimental PKCS#7 streaming encoder support. Nothing uses
1062 it yet and it is largely untested.
1065 *) Add support for the ecdsa-with-SHA224/256/384/512 signature types.
1068 *) Initial incomplete changes to avoid need for function casts in OpenSSL
1069 some compilers (gcc 4.2 and later) reject their use. Safestack is
1070 reimplemented. Update ASN1 to avoid use of legacy functions.
1073 *) Win32/64 targets are linked with Winsock2.
1076 *) Add an X509_CRL_METHOD structure to allow CRL processing to be redirected
1077 to external functions. This can be used to increase CRL handling
1078 efficiency especially when CRLs are very large by (for example) storing
1079 the CRL revoked certificates in a database.
1082 *) Overhaul of by_dir code. Add support for dynamic loading of CRLs so
1083 new CRLs added to a directory can be used. New command line option
1084 -verify_return_error to s_client and s_server. This causes real errors
1085 to be returned by the verify callback instead of carrying on no matter
1086 what. This reflects the way a "real world" verify callback would behave.
1089 *) GOST engine, supporting several GOST algorithms and public key formats.
1090 Kindly donated by Cryptocom.
1093 *) Partial support for Issuing Distribution Point CRL extension. CRLs
1094 partitioned by DP are handled but no indirect CRL or reason partitioning
1095 (yet). Complete overhaul of CRL handling: now the most suitable CRL is
1096 selected via a scoring technique which handles IDP and AKID in CRLs.
1099 *) New X509_STORE_CTX callbacks lookup_crls() and lookup_certs() which
1100 will ultimately be used for all verify operations: this will remove the
1101 X509_STORE dependency on certificate verification and allow alternative
1102 lookup methods. X509_STORE based implementations of these two callbacks.
1105 *) Allow multiple CRLs to exist in an X509_STORE with matching issuer names.
1106 Modify get_crl() to find a valid (unexpired) CRL if possible.
1109 *) New function X509_CRL_match() to check if two CRLs are identical. Normally
1110 this would be called X509_CRL_cmp() but that name is already used by
1111 a function that just compares CRL issuer names. Cache several CRL
1112 extensions in X509_CRL structure and cache CRLDP in X509.
1115 *) Store a "canonical" representation of X509_NAME structure (ASN1 Name)
1116 this maps equivalent X509_NAME structures into a consistent structure.
1117 Name comparison can then be performed rapidly using memcmp().
1120 *) Non-blocking OCSP request processing. Add -timeout option to ocsp
1124 *) Allow digests to supply their own micalg string for S/MIME type using
1125 the ctrl EVP_MD_CTRL_MICALG.
1128 *) During PKCS7 signing pass the PKCS7 SignerInfo structure to the
1129 EVP_PKEY_METHOD before and after signing via the EVP_PKEY_CTRL_PKCS7_SIGN
1130 ctrl. It can then customise the structure before and/or after signing
1134 *) New function OBJ_add_sigid() to allow application defined signature OIDs
1135 to be added to OpenSSLs internal tables. New function OBJ_sigid_free()
1136 to free up any added signature OIDs.
1139 *) New functions EVP_CIPHER_do_all(), EVP_CIPHER_do_all_sorted(),
1140 EVP_MD_do_all() and EVP_MD_do_all_sorted() to enumerate internal
1141 digest and cipher tables. New options added to openssl utility:
1142 list-message-digest-algorithms and list-cipher-algorithms.
1145 *) Change the array representation of binary polynomials: the list
1146 of degrees of non-zero coefficients is now terminated with -1.
1147 Previously it was terminated with 0, which was also part of the
1148 value; thus, the array representation was not applicable to
1149 polynomials where t^0 has coefficient zero. This change makes
1150 the array representation useful in a more general context.
1153 *) Various modifications and fixes to SSL/TLS cipher string
1154 handling. For ECC, the code now distinguishes between fixed ECDH
1155 with RSA certificates on the one hand and with ECDSA certificates
1156 on the other hand, since these are separate ciphersuites. The
1157 unused code for Fortezza ciphersuites has been removed.
1159 For consistency with EDH, ephemeral ECDH is now called "EECDH"
1160 (not "ECDHE"). For consistency with the code for DH
1161 certificates, use of ECDH certificates is now considered ECDH
1162 authentication, not RSA or ECDSA authentication (the latter is
1163 merely the CA's signing algorithm and not actively used in the
1166 The temporary ciphersuite alias "ECCdraft" is no longer
1167 available, and ECC ciphersuites are no longer excluded from "ALL"
1168 and "DEFAULT". The following aliases now exist for RFC 4492
1169 ciphersuites, most of these by analogy with the DH case:
1171 kECDHr - ECDH cert, signed with RSA
1172 kECDHe - ECDH cert, signed with ECDSA
1173 kECDH - ECDH cert (signed with either RSA or ECDSA)
1174 kEECDH - ephemeral ECDH
1175 ECDH - ECDH cert or ephemeral ECDH
1181 AECDH - anonymous ECDH
1182 EECDH - non-anonymous ephemeral ECDH (equivalent to "kEECDH:-AECDH")
1186 *) Add additional S/MIME capabilities for AES and GOST ciphers if supported.
1187 Use correct micalg parameters depending on digest(s) in signed message.
1190 *) Add engine support for EVP_PKEY_ASN1_METHOD. Add functions to process
1191 an ENGINE asn1 method. Support ENGINE lookups in the ASN1 code.
1194 *) Initial engine support for EVP_PKEY_METHOD. New functions to permit
1195 an engine to register a method. Add ENGINE lookups for methods and
1196 functional reference processing.
1199 *) New functions EVP_Digest{Sign,Verify)*. These are enchance versions of
1200 EVP_{Sign,Verify}* which allow an application to customise the signature
1204 *) New -resign option to smime utility. This adds one or more signers
1205 to an existing PKCS#7 signedData structure. Also -md option to use an
1206 alternative message digest algorithm for signing.
1209 *) Tidy up PKCS#7 routines and add new functions to make it easier to
1210 create PKCS7 structures containing multiple signers. Update smime
1211 application to support multiple signers.
1214 *) New -macalg option to pkcs12 utility to allow setting of an alternative
1218 *) Initial support for PKCS#5 v2.0 PRFs other than default SHA1 HMAC.
1219 Reorganize PBE internals to lookup from a static table using NIDs,
1220 add support for HMAC PBE OID translation. Add a EVP_CIPHER ctrl:
1221 EVP_CTRL_PBE_PRF_NID this allows a cipher to specify an alternative
1222 PRF which will be automatically used with PBES2.
1225 *) Replace the algorithm specific calls to generate keys in "req" with the
1229 *) Update PKCS#7 enveloped data routines to use new API. This is now
1230 supported by any public key method supporting the encrypt operation. A
1231 ctrl is added to allow the public key algorithm to examine or modify
1232 the PKCS#7 RecipientInfo structure if it needs to: for RSA this is
1236 *) Add a ctrl to asn1 method to allow a public key algorithm to express
1237 a default digest type to use. In most cases this will be SHA1 but some
1238 algorithms (such as GOST) need to specify an alternative digest. The
1239 return value indicates how strong the prefernce is 1 means optional and
1240 2 is mandatory (that is it is the only supported type). Modify
1241 ASN1_item_sign() to accept a NULL digest argument to indicate it should
1242 use the default md. Update openssl utilities to use the default digest
1243 type for signing if it is not explicitly indicated.
1246 *) Use OID cross reference table in ASN1_sign() and ASN1_verify(). New
1247 EVP_MD flag EVP_MD_FLAG_PKEY_METHOD_SIGNATURE. This uses the relevant
1248 signing method from the key type. This effectively removes the link
1249 between digests and public key types.
1252 *) Add an OID cross reference table and utility functions. Its purpose is to
1253 translate between signature OIDs such as SHA1WithrsaEncryption and SHA1,
1254 rsaEncryption. This will allow some of the algorithm specific hackery
1255 needed to use the correct OID to be removed.
1258 *) Remove algorithm specific dependencies when setting PKCS7_SIGNER_INFO
1259 structures for PKCS7_sign(). They are now set up by the relevant public
1263 *) Add provisional EC pkey method with support for ECDSA and ECDH.
1266 *) Add support for key derivation (agreement) in the API, DH method and
1270 *) Add DSA pkey method and DH pkey methods, extend DH ASN1 method to support
1271 public and private key formats. As a side effect these add additional
1272 command line functionality not previously available: DSA signatures can be
1273 generated and verified using pkeyutl and DH key support and generation in
1278 [Oliver Tappe <zooey@hirschkaefer.de>]
1280 *) New make target "install_html_docs" installs HTML renditions of the
1282 [Oliver Tappe <zooey@hirschkaefer.de>]
1284 *) New utility "genpkey" this is analagous to "genrsa" etc except it can
1285 generate keys for any algorithm. Extend and update EVP_PKEY_METHOD to
1286 support key and parameter generation and add initial key generation
1287 functionality for RSA.
1290 *) Add functions for main EVP_PKEY_method operations. The undocumented
1291 functions EVP_PKEY_{encrypt,decrypt} have been renamed to
1292 EVP_PKEY_{encrypt,decrypt}_old.
1295 *) Initial definitions for EVP_PKEY_METHOD. This will be a high level public
1296 key API, doesn't do much yet.
1299 *) New function EVP_PKEY_asn1_get0_info() to retrieve information about
1300 public key algorithms. New option to openssl utility:
1301 "list-public-key-algorithms" to print out info.
1304 *) Implement the Supported Elliptic Curves Extension for
1305 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
1308 *) Don't free up OIDs in OBJ_cleanup() if they are in use by EVP_MD or
1309 EVP_CIPHER structures to avoid later problems in EVP_cleanup().
1312 *) New utilities pkey and pkeyparam. These are similar to algorithm specific
1313 utilities such as rsa, dsa, dsaparam etc except they process any key
1317 *) Transfer public key printing routines to EVP_PKEY_ASN1_METHOD. New
1318 functions EVP_PKEY_print_public(), EVP_PKEY_print_private(),
1319 EVP_PKEY_print_param() to print public key data from an EVP_PKEY
1323 *) Initial support for pluggable public key ASN1.
1324 De-spaghettify the public key ASN1 handling. Move public and private
1325 key ASN1 handling to a new EVP_PKEY_ASN1_METHOD structure. Relocate
1326 algorithm specific handling to a single module within the relevant
1327 algorithm directory. Add functions to allow (near) opaque processing
1328 of public and private key structures.
1331 *) Implement the Supported Point Formats Extension for
1332 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
1335 *) Add initial support for RFC 4279 PSK TLS ciphersuites. Add members
1336 for the psk identity [hint] and the psk callback functions to the
1337 SSL_SESSION, SSL and SSL_CTX structure.
1340 PSK-RC4-SHA, PSK-3DES-EDE-CBC-SHA, PSK-AES128-CBC-SHA,
1344 SSL_CTX_use_psk_identity_hint
1345 SSL_get_psk_identity_hint
1346 SSL_get_psk_identity
1347 SSL_use_psk_identity_hint
1349 [Mika Kousa and Pasi Eronen of Nokia Corporation]
1351 *) Add RFC 3161 compliant time stamp request creation, response generation
1352 and response verification functionality.
1353 [Zoltán Glózik <zglozik@opentsa.org>, The OpenTSA Project]
1355 *) Add initial support for TLS extensions, specifically for the server_name
1356 extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
1357 have new members for a host name. The SSL data structure has an
1358 additional member SSL_CTX *initial_ctx so that new sessions can be
1359 stored in that context to allow for session resumption, even after the
1360 SSL has been switched to a new SSL_CTX in reaction to a client's
1361 server_name extension.
1363 New functions (subject to change):
1365 SSL_get_servername()
1366 SSL_get_servername_type()
1369 New CTRL codes and macros (subject to change):
1371 SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
1372 - SSL_CTX_set_tlsext_servername_callback()
1373 SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
1374 - SSL_CTX_set_tlsext_servername_arg()
1375 SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_host_name()
1377 openssl s_client has a new '-servername ...' option.
1379 openssl s_server has new options '-servername_host ...', '-cert2 ...',
1380 '-key2 ...', '-servername_fatal' (subject to change). This allows
1381 testing the HostName extension for a specific single host name ('-cert'
1382 and '-key' remain fallbacks for handshakes without HostName
1383 negotiation). If the unrecogninzed_name alert has to be sent, this by
1384 default is a warning; it becomes fatal with the '-servername_fatal'
1387 [Peter Sylvester, Remy Allais, Christophe Renou]
1389 *) Whirlpool hash implementation is added.
1392 *) BIGNUM code on 64-bit SPARCv9 targets is switched from bn(64,64) to
1393 bn(64,32). Because of instruction set limitations it doesn't have
1394 any negative impact on performance. This was done mostly in order
1395 to make it possible to share assembler modules, such as bn_mul_mont
1396 implementations, between 32- and 64-bit builds without hassle.
1399 *) Move code previously exiled into file crypto/ec/ec2_smpt.c
1400 to ec2_smpl.c, and no longer require the OPENSSL_EC_BIN_PT_COMP
1404 *) New candidate for BIGNUM assembler implementation, bn_mul_mont,
1405 dedicated Montgomery multiplication procedure, is introduced.
1406 BN_MONT_CTX is modified to allow bn_mul_mont to reach for higher
1407 "64-bit" performance on certain 32-bit targets.
1410 *) New option SSL_OP_NO_COMP to disable use of compression selectively
1411 in SSL structures. New SSL ctrl to set maximum send fragment size.
1412 Save memory by seeting the I/O buffer sizes dynamically instead of
1413 using the maximum available value.
1416 *) New option -V for 'openssl ciphers'. This prints the ciphersuite code
1417 in addition to the text details.
1420 *) Very, very preliminary EXPERIMENTAL support for printing of general
1421 ASN1 structures. This currently produces rather ugly output and doesn't
1422 handle several customised structures at all.
1425 *) Integrated support for PVK file format and some related formats such
1426 as MS PUBLICKEYBLOB and PRIVATEKEYBLOB. Command line switches to support
1427 these in the 'rsa' and 'dsa' utilities.
1430 *) Support for PKCS#1 RSAPublicKey format on rsa utility command line.
1433 *) Remove the ancient ASN1_METHOD code. This was only ever used in one
1434 place for the (very old) "NETSCAPE" format certificates which are now
1435 handled using new ASN1 code equivalents.
1438 *) Let the TLSv1_method() etc. functions return a 'const' SSL_METHOD
1439 pointer and make the SSL_METHOD parameter in SSL_CTX_new,
1440 SSL_CTX_set_ssl_version and SSL_set_ssl_method 'const'.
1443 *) Modify CRL distribution points extension code to print out previously
1444 unsupported fields. Enhance extension setting code to allow setting of
1448 *) Add print and set support for Issuing Distribution Point CRL extension.
1451 *) Change 'Configure' script to enable Camellia by default.
1454 Changes between 0.9.8r and 0.9.8s [xx XXX xxxx]
1456 *) Fix ssl_ciph.c set-up race.
1457 [Adam Langley (Google)]
1459 *) Fix spurious failures in ecdsatest.c.
1460 [Emilia Käsper (Google)]
1462 *) Fix the BIO_f_buffer() implementation (which was mixing different
1463 interpretations of the '..._len' fields).
1464 [Adam Langley (Google)]
1466 *) Fix handling of BN_BLINDING: now BN_BLINDING_invert_ex (rather than
1467 BN_BLINDING_invert_ex) calls BN_BLINDING_update, ensuring that concurrent
1468 threads won't reuse the same blinding coefficients.
1470 This also avoids the need to obtain the CRYPTO_LOCK_RSA_BLINDING
1471 lock to call BN_BLINDING_invert_ex, and avoids one use of
1472 BN_BLINDING_update for each BN_BLINDING structure (previously,
1473 the last update always remained unused).
1474 [Emilia Käsper (Google)]
1476 *) Fix SSL memory handling for (EC)DH ciphersuites, in particular
1477 for multi-threaded use of ECDH.
1478 [Adam Langley (Google)]
1480 *) Fix x509_name_ex_d2i memory leak on bad inputs.
1483 *) Add protection against ECDSA timing attacks as mentioned in the paper
1484 by Billy Bob Brumley and Nicola Tuveri, see:
1486 http://eprint.iacr.org/2011/232.pdf
1488 [Billy Bob Brumley and Nicola Tuveri]
1490 Changes between 0.9.8q and 0.9.8r [8 Feb 2011]
1492 *) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
1493 [Neel Mehta, Adam Langley, Bodo Moeller (Google)]
1495 *) Fix bug in string printing code: if *any* escaping is enabled we must
1496 escape the escape character (backslash) or the resulting string is
1500 Changes between 0.9.8p and 0.9.8q [2 Dec 2010]
1502 *) Disable code workaround for ancient and obsolete Netscape browsers
1503 and servers: an attacker can use it in a ciphersuite downgrade attack.
1504 Thanks to Martin Rex for discovering this bug. CVE-2010-4180
1507 *) Fixed J-PAKE implementation error, originally discovered by
1508 Sebastien Martini, further info and confirmation from Stefan
1509 Arentz and Feng Hao. Note that this fix is a security fix. CVE-2010-4252
1512 Changes between 0.9.8o and 0.9.8p [16 Nov 2010]
1514 *) Fix extension code to avoid race conditions which can result in a buffer
1515 overrun vulnerability: resumed sessions must not be modified as they can
1516 be shared by multiple threads. CVE-2010-3864
1519 *) Fix for double free bug in ssl/s3_clnt.c CVE-2010-2939
1522 *) Don't reencode certificate when calculating signature: cache and use
1523 the original encoding instead. This makes signature verification of
1524 some broken encodings work correctly.
1527 *) ec2_GF2m_simple_mul bugfix: compute correct result if the output EC_POINT
1528 is also one of the inputs.
1529 [Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
1531 *) Don't repeatedly append PBE algorithms to table if they already exist.
1532 Sort table on each new add. This effectively makes the table read only
1533 after all algorithms are added and subsequent calls to PKCS12_pbe_add
1537 Changes between 0.9.8n and 0.9.8o [01 Jun 2010]
1539 [NB: OpenSSL 0.9.8o and later 0.9.8 patch levels were released after
1542 *) Correct a typo in the CMS ASN1 module which can result in invalid memory
1543 access or freeing data twice (CVE-2010-0742)
1544 [Steve Henson, Ronald Moesbergen <intercommit@gmail.com>]
1546 *) Add SHA2 algorithms to SSL_library_init(). SHA2 is becoming far more
1547 common in certificates and some applications which only call
1548 SSL_library_init and not OpenSSL_add_all_algorithms() will fail.
1552 Reduce copying into .apps and .test in makevms.com
1553 Don't try to use blank CA certificate in CA.com
1554 Allow use of C files from original directories in maketests.com
1555 [Steven M. Schweda" <sms@antinode.info>]
1557 Changes between 0.9.8m and 0.9.8n [24 Mar 2010]
1559 *) When rejecting SSL/TLS records due to an incorrect version number, never
1560 update s->server with a new major version number. As of
1561 - OpenSSL 0.9.8m if 'short' is a 16-bit type,
1562 - OpenSSL 0.9.8f if 'short' is longer than 16 bits,
1563 the previous behavior could result in a read attempt at NULL when
1564 receiving specific incorrect SSL/TLS records once record payload
1565 protection is active. (CVE-2010-0740)
1566 [Bodo Moeller, Adam Langley <agl@chromium.org>]
1568 *) Fix for CVE-2010-0433 where some kerberos enabled versions of OpenSSL
1569 could be crashed if the relevant tables were not present (e.g. chrooted).
1570 [Tomas Hoger <thoger@redhat.com>]
1572 Changes between 0.9.8l and 0.9.8m [25 Feb 2010]
1574 *) Always check bn_wexpend() return values for failure. (CVE-2009-3245)
1575 [Martin Olsson, Neel Mehta]
1577 *) Fix X509_STORE locking: Every 'objs' access requires a lock (to
1578 accommodate for stack sorting, always a write lock!).
1581 *) On some versions of WIN32 Heap32Next is very slow. This can cause
1582 excessive delays in the RAND_poll(): over a minute. As a workaround
1583 include a time check in the inner Heap32Next loop too.
1586 *) The code that handled flushing of data in SSL/TLS originally used the
1587 BIO_CTRL_INFO ctrl to see if any data was pending first. This caused
1588 the problem outlined in PR#1949. The fix suggested there however can
1589 trigger problems with buggy BIO_CTRL_WPENDING (e.g. some versions
1590 of Apache). So instead simplify the code to flush unconditionally.
1591 This should be fine since flushing with no data to flush is a no op.
1594 *) Handle TLS versions 2.0 and later properly and correctly use the
1595 highest version of TLS/SSL supported. Although TLS >= 2.0 is some way
1596 off ancient servers have a habit of sticking around for a while...
1599 *) Modify compression code so it frees up structures without using the
1600 ex_data callbacks. This works around a problem where some applications
1601 call CRYPTO_cleanup_all_ex_data() before application exit (e.g. when
1602 restarting) then use compression (e.g. SSL with compression) later.
1603 This results in significant per-connection memory leaks and
1604 has caused some security issues including CVE-2008-1678 and
1608 *) Constify crypto/cast (i.e., <openssl/cast.h>): a CAST_KEY doesn't
1609 change when encrypting or decrypting.
1612 *) Add option SSL_OP_LEGACY_SERVER_CONNECT which will allow clients to
1613 connect and renegotiate with servers which do not support RI.
1614 Until RI is more widely deployed this option is enabled by default.
1617 *) Add "missing" ssl ctrls to clear options and mode.
1620 *) If client attempts to renegotiate and doesn't support RI respond with
1621 a no_renegotiation alert as required by RFC5746. Some renegotiating
1622 TLS clients will continue a connection gracefully when they receive
1623 the alert. Unfortunately OpenSSL mishandled this alert and would hang
1624 waiting for a server hello which it will never receive. Now we treat a
1625 received no_renegotiation alert as a fatal error. This is because
1626 applications requesting a renegotiation might well expect it to succeed
1627 and would have no code in place to handle the server denying it so the
1628 only safe thing to do is to terminate the connection.
1631 *) Add ctrl macro SSL_get_secure_renegotiation_support() which returns 1 if
1632 peer supports secure renegotiation and 0 otherwise. Print out peer
1633 renegotiation support in s_client/s_server.
1636 *) Replace the highly broken and deprecated SPKAC certification method with
1637 the updated NID creation version. This should correctly handle UTF8.
1640 *) Implement RFC5746. Re-enable renegotiation but require the extension
1641 as needed. Unfortunately, SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION
1642 turns out to be a bad idea. It has been replaced by
1643 SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION which can be set with
1644 SSL_CTX_set_options(). This is really not recommended unless you
1645 know what you are doing.
1646 [Eric Rescorla <ekr@networkresonance.com>, Ben Laurie, Steve Henson]
1648 *) Fixes to stateless session resumption handling. Use initial_ctx when
1649 issuing and attempting to decrypt tickets in case it has changed during
1650 servername handling. Use a non-zero length session ID when attempting
1651 stateless session resumption: this makes it possible to determine if
1652 a resumption has occurred immediately after receiving server hello
1653 (several places in OpenSSL subtly assume this) instead of later in
1657 *) The functions ENGINE_ctrl(), OPENSSL_isservice(),
1658 CMS_get1_RecipientRequest() and RAND_bytes() can return <=0 on error
1659 fixes for a few places where the return code is not checked
1661 [Julia Lawall <julia@diku.dk>]
1663 *) Add --strict-warnings option to Configure script to include devteam
1664 warnings in other configurations.
1667 *) Add support for --libdir option and LIBDIR variable in makefiles. This
1668 makes it possible to install openssl libraries in locations which
1669 have names other than "lib", for example "/usr/lib64" which some
1671 [Steve Henson, based on patch from Jeremy Utley]
1673 *) Don't allow the use of leading 0x80 in OIDs. This is a violation of
1674 X690 8.9.12 and can produce some misleading textual output of OIDs.
1675 [Steve Henson, reported by Dan Kaminsky]
1677 *) Delete MD2 from algorithm tables. This follows the recommendation in
1678 several standards that it is not used in new applications due to
1679 several cryptographic weaknesses. For binary compatibility reasons
1680 the MD2 API is still compiled in by default.
1683 *) Add compression id to {d2i,i2d}_SSL_SESSION so it is correctly saved
1687 *) Rename uni2asc and asc2uni functions to OPENSSL_uni2asc and
1688 OPENSSL_asc2uni conditionally on Netware platforms to avoid a name
1690 [Guenter <lists@gknw.net>]
1692 *) Fix the server certificate chain building code to use X509_verify_cert(),
1693 it used to have an ad-hoc builder which was unable to cope with anything
1694 other than a simple chain.
1695 [David Woodhouse <dwmw2@infradead.org>, Steve Henson]
1697 *) Don't check self signed certificate signatures in X509_verify_cert()
1698 by default (a flag can override this): it just wastes time without
1699 adding any security. As a useful side effect self signed root CAs
1700 with non-FIPS digests are now usable in FIPS mode.
1703 *) In dtls1_process_out_of_seq_message() the check if the current message
1704 is already buffered was missing. For every new message was memory
1705 allocated, allowing an attacker to perform an denial of service attack
1706 with sending out of seq handshake messages until there is no memory
1707 left. Additionally every future messege was buffered, even if the
1708 sequence number made no sense and would be part of another handshake.
1709 So only messages with sequence numbers less than 10 in advance will be
1710 buffered. (CVE-2009-1378)
1711 [Robin Seggelmann, discovered by Daniel Mentz]
1713 *) Records are buffered if they arrive with a future epoch to be
1714 processed after finishing the corresponding handshake. There is
1715 currently no limitation to this buffer allowing an attacker to perform
1716 a DOS attack with sending records with future epochs until there is no
1717 memory left. This patch adds the pqueue_size() function to detemine
1718 the size of a buffer and limits the record buffer to 100 entries.
1720 [Robin Seggelmann, discovered by Daniel Mentz]
1722 *) Keep a copy of frag->msg_header.frag_len so it can be used after the
1723 parent structure is freed. (CVE-2009-1379)
1726 *) Handle non-blocking I/O properly in SSL_shutdown() call.
1727 [Darryl Miles <darryl-mailinglists@netbauds.net>]
1730 [Ilya O. <vrghost@gmail.com>]
1732 Changes between 0.9.8k and 0.9.8l [5 Nov 2009]
1734 *) Disable renegotiation completely - this fixes a severe security
1735 problem (CVE-2009-3555) at the cost of breaking all
1736 renegotiation. Renegotiation can be re-enabled by setting
1737 SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION in s3->flags at
1738 run-time. This is really not recommended unless you know what
1742 Changes between 0.9.8j and 0.9.8k [25 Mar 2009]
1744 *) Don't set val to NULL when freeing up structures, it is freed up by
1745 underlying code. If sizeof(void *) > sizeof(long) this can result in
1746 zeroing past the valid field. (CVE-2009-0789)
1747 [Paolo Ganci <Paolo.Ganci@AdNovum.CH>]
1749 *) Fix bug where return value of CMS_SignerInfo_verify_content() was not
1750 checked correctly. This would allow some invalid signed attributes to
1751 appear to verify correctly. (CVE-2009-0591)
1752 [Ivan Nestlerode <inestlerode@us.ibm.com>]
1754 *) Reject UniversalString and BMPString types with invalid lengths. This
1755 prevents a crash in ASN1_STRING_print_ex() which assumes the strings have
1756 a legal length. (CVE-2009-0590)
1759 *) Set S/MIME signing as the default purpose rather than setting it
1760 unconditionally. This allows applications to override it at the store
1764 *) Permit restricted recursion of ASN1 strings. This is needed in practice
1765 to handle some structures.
1768 *) Improve efficiency of mem_gets: don't search whole buffer each time
1770 [Jeremy Shapiro <jnshapir@us.ibm.com>]
1772 *) New -hex option for openssl rand.
1775 *) Print out UTF8String and NumericString when parsing ASN1.
1778 *) Support NumericString type for name components.
1781 *) Allow CC in the environment to override the automatically chosen
1782 compiler. Note that nothing is done to ensure flags work with the
1786 Changes between 0.9.8i and 0.9.8j [07 Jan 2009]
1788 *) Properly check EVP_VerifyFinal() and similar return values
1790 [Ben Laurie, Bodo Moeller, Google Security Team]
1792 *) Enable TLS extensions by default.
1795 *) Allow the CHIL engine to be loaded, whether the application is
1796 multithreaded or not. (This does not release the developer from the
1797 obligation to set up the dynamic locking callbacks.)
1798 [Sander Temme <sander@temme.net>]
1800 *) Use correct exit code if there is an error in dgst command.
1801 [Steve Henson; problem pointed out by Roland Dirlewanger]
1803 *) Tweak Configure so that you need to say "experimental-jpake" to enable
1804 JPAKE, and need to use -DOPENSSL_EXPERIMENTAL_JPAKE in applications.
1807 *) Add experimental JPAKE support, including demo authentication in
1808 s_client and s_server.
1811 *) Set the comparison function in v3_addr_canonize().
1812 [Rob Austein <sra@hactrn.net>]
1814 *) Add support for XMPP STARTTLS in s_client.
1815 [Philip Paeps <philip@freebsd.org>]
1817 *) Change the server-side SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG behavior
1818 to ensure that even with this option, only ciphersuites in the
1819 server's preference list will be accepted. (Note that the option
1820 applies only when resuming a session, so the earlier behavior was
1821 just about the algorithm choice for symmetric cryptography.)
1824 Changes between 0.9.8h and 0.9.8i [15 Sep 2008]
1826 *) Fix NULL pointer dereference if a DTLS server received
1827 ChangeCipherSpec as first record (CVE-2009-1386).
1830 *) Fix a state transitition in s3_srvr.c and d1_srvr.c
1831 (was using SSL3_ST_CW_CLNT_HELLO_B, should be ..._ST_SW_SRVR_...).
1834 *) The fix in 0.9.8c that supposedly got rid of unsafe
1835 double-checked locking was incomplete for RSA blinding,
1836 addressing just one layer of what turns out to have been
1837 doubly unsafe triple-checked locking.
1839 So now fix this for real by retiring the MONT_HELPER macro
1840 in crypto/rsa/rsa_eay.c.
1842 [Bodo Moeller; problem pointed out by Marius Schilder]
1844 *) Various precautionary measures:
1846 - Avoid size_t integer overflow in HASH_UPDATE (md32_common.h).
1848 - Avoid a buffer overflow in d2i_SSL_SESSION() (ssl_asn1.c).
1849 (NB: This would require knowledge of the secret session ticket key
1850 to exploit, in which case you'd be SOL either way.)
1852 - Change bn_nist.c so that it will properly handle input BIGNUMs
1853 outside the expected range.
1855 - Enforce the 'num' check in BN_div() (bn_div.c) for non-BN_DEBUG
1858 [Neel Mehta, Bodo Moeller]
1860 *) Allow engines to be "soft loaded" - i.e. optionally don't die if
1861 the load fails. Useful for distros.
1862 [Ben Laurie and the FreeBSD team]
1864 *) Add support for Local Machine Keyset attribute in PKCS#12 files.
1867 *) Fix BN_GF2m_mod_arr() top-bit cleanup code.
1870 *) Expand ENGINE to support engine supplied SSL client certificate functions.
1872 This work was sponsored by Logica.
1875 *) Add CryptoAPI ENGINE to support use of RSA and DSA keys held in Windows
1876 keystores. Support for SSL/TLS client authentication too.
1877 Not compiled unless enable-capieng specified to Configure.
1879 This work was sponsored by Logica.
1882 *) Fix bug in X509_ATTRIBUTE creation: dont set attribute using
1883 ASN1_TYPE_set1 if MBSTRING flag set. This bug would crash certain
1884 attribute creation routines such as certifcate requests and PKCS#12
1888 Changes between 0.9.8g and 0.9.8h [28 May 2008]
1890 *) Fix flaw if 'Server Key exchange message' is omitted from a TLS
1891 handshake which could lead to a cilent crash as found using the
1892 Codenomicon TLS test suite (CVE-2008-1672)
1893 [Steve Henson, Mark Cox]
1895 *) Fix double free in TLS server name extensions which could lead to
1896 a remote crash found by Codenomicon TLS test suite (CVE-2008-0891)
1899 *) Clear error queue in SSL_CTX_use_certificate_chain_file()
1901 Clear the error queue to ensure that error entries left from
1902 older function calls do not interfere with the correct operation.
1903 [Lutz Jaenicke, Erik de Castro Lopo]
1905 *) Remove root CA certificates of commercial CAs:
1907 The OpenSSL project does not recommend any specific CA and does not
1908 have any policy with respect to including or excluding any CA.
1909 Therefore it does not make any sense to ship an arbitrary selection
1910 of root CA certificates with the OpenSSL software.
1913 *) RSA OAEP patches to fix two separate invalid memory reads.
1914 The first one involves inputs when 'lzero' is greater than
1915 'SHA_DIGEST_LENGTH' (it would read about SHA_DIGEST_LENGTH bytes
1916 before the beginning of from). The second one involves inputs where
1917 the 'db' section contains nothing but zeroes (there is a one-byte
1918 invalid read after the end of 'db').
1919 [Ivan Nestlerode <inestlerode@us.ibm.com>]
1921 *) Partial backport from 0.9.9-dev:
1923 Introduce bn_mul_mont (dedicated Montgomery multiplication
1924 procedure) as a candidate for BIGNUM assembler implementation.
1925 While 0.9.9-dev uses assembler for various architectures, only
1926 x86_64 is available by default here in the 0.9.8 branch, and
1927 32-bit x86 is available through a compile-time setting.
1929 To try the 32-bit x86 assembler implementation, use Configure
1930 option "enable-montasm" (which exists only for this backport).
1932 As "enable-montasm" for 32-bit x86 disclaims code stability
1933 anyway, in this constellation we activate additional code
1934 backported from 0.9.9-dev for further performance improvements,
1935 namely BN_from_montgomery_word. (To enable this otherwise,
1936 e.g. x86_64, try "-DMONT_FROM_WORD___NON_DEFAULT_0_9_8_BUILD".)
1938 [Andy Polyakov (backport partially by Bodo Moeller)]
1940 *) Add TLS session ticket callback. This allows an application to set
1941 TLS ticket cipher and HMAC keys rather than relying on hardcoded fixed
1942 values. This is useful for key rollover for example where several key
1943 sets may exist with different names.
1946 *) Reverse ENGINE-internal logic for caching default ENGINE handles.
1947 This was broken until now in 0.9.8 releases, such that the only way
1948 a registered ENGINE could be used (assuming it initialises
1949 successfully on the host) was to explicitly set it as the default
1950 for the relevant algorithms. This is in contradiction with 0.9.7
1951 behaviour and the documentation. With this fix, when an ENGINE is
1952 registered into a given algorithm's table of implementations, the
1953 'uptodate' flag is reset so that auto-discovery will be used next
1954 time a new context for that algorithm attempts to select an
1956 [Ian Lister (tweaked by Geoff Thorpe)]
1958 *) Backport of CMS code to OpenSSL 0.9.8. This differs from the 0.9.9
1959 implemention in the following ways:
1961 Lack of EVP_PKEY_ASN1_METHOD means algorithm parameters have to be
1964 Lack of BER streaming support means one pass streaming processing is
1965 only supported if data is detached: setting the streaming flag is
1966 ignored for embedded content.
1968 CMS support is disabled by default and must be explicitly enabled
1969 with the enable-cms configuration option.
1972 *) Update the GMP engine glue to do direct copies between BIGNUM and
1973 mpz_t when openssl and GMP use the same limb size. Otherwise the
1974 existing "conversion via a text string export" trick is still used.
1975 [Paul Sheer <paulsheer@gmail.com>]
1977 *) Zlib compression BIO. This is a filter BIO which compressed and
1978 uncompresses any data passed through it.
1981 *) Add AES_wrap_key() and AES_unwrap_key() functions to implement
1982 RFC3394 compatible AES key wrapping.
1985 *) Add utility functions to handle ASN1 structures. ASN1_STRING_set0():
1986 sets string data without copying. X509_ALGOR_set0() and
1987 X509_ALGOR_get0(): set and retrieve X509_ALGOR (AlgorithmIdentifier)
1988 data. Attribute function X509at_get0_data_by_OBJ(): retrieves data
1989 from an X509_ATTRIBUTE structure optionally checking it occurs only
1990 once. ASN1_TYPE_set1(): set and ASN1_TYPE structure copying supplied
1994 *) Fix BN flag handling in RSA_eay_mod_exp() and BN_MONT_CTX_set()
1995 to get the expected BN_FLG_CONSTTIME behavior.
1996 [Bodo Moeller (Google)]
2000 - fixed wrong usage of ioctlsocket() when build for LIBC BSD sockets
2001 - fixed do_tests.pl to run the test suite with CLIB builds too (CLIB_OPT)
2002 - added some more tests to do_tests.pl
2003 - fixed RunningProcess usage so that it works with newer LIBC NDKs too
2004 - removed usage of BN_LLONG for CLIB builds to avoid runtime dependency
2005 - added new Configure targets netware-clib-bsdsock, netware-clib-gcc,
2006 netware-clib-bsdsock-gcc, netware-libc-bsdsock-gcc
2007 - various changes to netware.pl to enable gcc-cross builds on Win32
2009 - changed crypto/bio/b_sock.c to work with macro functions (CLIB BSD)
2010 - various changes to fix missing prototype warnings
2011 - fixed x86nasm.pl to create correct asm files for NASM COFF output
2012 - added AES, WHIRLPOOL and CPUID assembler code to build files
2013 - added missing AES assembler make rules to mk1mf.pl
2014 - fixed order of includes in apps/ocsp.c so that e_os.h settings apply
2015 [Guenter Knauf <eflash@gmx.net>]
2017 *) Implement certificate status request TLS extension defined in RFC3546.
2018 A client can set the appropriate parameters and receive the encoded
2019 OCSP response via a callback. A server can query the supplied parameters
2020 and set the encoded OCSP response in the callback. Add simplified examples
2021 to s_client and s_server.
2024 Changes between 0.9.8f and 0.9.8g [19 Oct 2007]
2026 *) Fix various bugs:
2027 + Binary incompatibility of ssl_ctx_st structure
2028 + DTLS interoperation with non-compliant servers
2029 + Don't call get_session_cb() without proposed session
2030 + Fix ia64 assembler code
2031 [Andy Polyakov, Steve Henson]
2033 Changes between 0.9.8e and 0.9.8f [11 Oct 2007]
2035 *) DTLS Handshake overhaul. There were longstanding issues with
2036 OpenSSL DTLS implementation, which were making it impossible for
2037 RFC 4347 compliant client to communicate with OpenSSL server.
2038 Unfortunately just fixing these incompatibilities would "cut off"
2039 pre-0.9.8f clients. To allow for hassle free upgrade post-0.9.8e
2040 server keeps tolerating non RFC compliant syntax. The opposite is
2041 not true, 0.9.8f client can not communicate with earlier server.
2042 This update even addresses CVE-2007-4995.
2045 *) Changes to avoid need for function casts in OpenSSL: some compilers
2046 (gcc 4.2 and later) reject their use.
2047 [Kurt Roeckx <kurt@roeckx.be>, Peter Hartley <pdh@utter.chaos.org.uk>,
2050 *) Add RFC4507 support to OpenSSL. This includes the corrections in
2051 RFC4507bis. The encrypted ticket format is an encrypted encoded
2052 SSL_SESSION structure, that way new session features are automatically
2055 If a client application caches session in an SSL_SESSION structure
2056 support is transparent because tickets are now stored in the encoded
2059 The SSL_CTX structure automatically generates keys for ticket
2060 protection in servers so again support should be possible
2061 with no application modification.
2063 If a client or server wishes to disable RFC4507 support then the option
2064 SSL_OP_NO_TICKET can be set.
2066 Add a TLS extension debugging callback to allow the contents of any client
2067 or server extensions to be examined.
2069 This work was sponsored by Google.
2072 *) Add initial support for TLS extensions, specifically for the server_name
2073 extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
2074 have new members for a host name. The SSL data structure has an
2075 additional member SSL_CTX *initial_ctx so that new sessions can be
2076 stored in that context to allow for session resumption, even after the
2077 SSL has been switched to a new SSL_CTX in reaction to a client's
2078 server_name extension.
2080 New functions (subject to change):
2082 SSL_get_servername()
2083 SSL_get_servername_type()
2086 New CTRL codes and macros (subject to change):
2088 SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
2089 - SSL_CTX_set_tlsext_servername_callback()
2090 SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
2091 - SSL_CTX_set_tlsext_servername_arg()
2092 SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_host_name()
2094 openssl s_client has a new '-servername ...' option.
2096 openssl s_server has new options '-servername_host ...', '-cert2 ...',
2097 '-key2 ...', '-servername_fatal' (subject to change). This allows
2098 testing the HostName extension for a specific single host name ('-cert'
2099 and '-key' remain fallbacks for handshakes without HostName
2100 negotiation). If the unrecogninzed_name alert has to be sent, this by
2101 default is a warning; it becomes fatal with the '-servername_fatal'
2104 [Peter Sylvester, Remy Allais, Christophe Renou, Steve Henson]
2106 *) Add AES and SSE2 assembly language support to VC++ build.
2109 *) Mitigate attack on final subtraction in Montgomery reduction.
2112 *) Fix crypto/ec/ec_mult.c to work properly with scalars of value 0
2113 (which previously caused an internal error).
2116 *) Squeeze another 10% out of IGE mode when in != out.
2119 *) AES IGE mode speedup.
2120 [Dean Gaudet (Google)]
2122 *) Add the Korean symmetric 128-bit cipher SEED (see
2123 http://www.kisa.or.kr/kisa/seed/jsp/seed_eng.jsp) and
2124 add SEED ciphersuites from RFC 4162:
2126 TLS_RSA_WITH_SEED_CBC_SHA = "SEED-SHA"
2127 TLS_DHE_DSS_WITH_SEED_CBC_SHA = "DHE-DSS-SEED-SHA"
2128 TLS_DHE_RSA_WITH_SEED_CBC_SHA = "DHE-RSA-SEED-SHA"
2129 TLS_DH_anon_WITH_SEED_CBC_SHA = "ADH-SEED-SHA"
2131 To minimize changes between patchlevels in the OpenSSL 0.9.8
2132 series, SEED remains excluded from compilation unless OpenSSL
2133 is configured with 'enable-seed'.
2134 [KISA, Bodo Moeller]
2136 *) Mitigate branch prediction attacks, which can be practical if a
2137 single processor is shared, allowing a spy process to extract
2138 information. For detailed background information, see
2139 http://eprint.iacr.org/2007/039 (O. Aciicmez, S. Gueron,
2140 J.-P. Seifert, "New Branch Prediction Vulnerabilities in OpenSSL
2141 and Necessary Software Countermeasures"). The core of the change
2142 are new versions BN_div_no_branch() and
2143 BN_mod_inverse_no_branch() of BN_div() and BN_mod_inverse(),
2144 respectively, which are slower, but avoid the security-relevant
2145 conditional branches. These are automatically called by BN_div()
2146 and BN_mod_inverse() if the flag BN_FLG_CONSTTIME is set for one
2147 of the input BIGNUMs. Also, BN_is_bit_set() has been changed to
2148 remove a conditional branch.
2150 BN_FLG_CONSTTIME is the new name for the previous
2151 BN_FLG_EXP_CONSTTIME flag, since it now affects more than just
2152 modular exponentiation. (Since OpenSSL 0.9.7h, setting this flag
2153 in the exponent causes BN_mod_exp_mont() to use the alternative
2154 implementation in BN_mod_exp_mont_consttime().) The old name
2155 remains as a deprecated alias.
2157 Similary, RSA_FLAG_NO_EXP_CONSTTIME is replaced by a more general
2158 RSA_FLAG_NO_CONSTTIME flag since the RSA implementation now uses
2159 constant-time implementations for more than just exponentiation.
2160 Here too the old name is kept as a deprecated alias.
2162 BN_BLINDING_new() will now use BN_dup() for the modulus so that
2163 the BN_BLINDING structure gets an independent copy of the
2164 modulus. This means that the previous "BIGNUM *m" argument to
2165 BN_BLINDING_new() and to BN_BLINDING_create_param() now
2166 essentially becomes "const BIGNUM *m", although we can't actually
2167 change this in the header file before 0.9.9. It allows
2168 RSA_setup_blinding() to use BN_with_flags() on the modulus to
2169 enable BN_FLG_CONSTTIME.
2171 [Matthew D Wood (Intel Corp)]
2173 *) In the SSL/TLS server implementation, be strict about session ID
2174 context matching (which matters if an application uses a single
2175 external cache for different purposes). Previously,
2176 out-of-context reuse was forbidden only if SSL_VERIFY_PEER was
2177 set. This did ensure strict client verification, but meant that,
2178 with applications using a single external cache for quite
2179 different requirements, clients could circumvent ciphersuite
2180 restrictions for a given session ID context by starting a session
2181 in a different context.
2184 *) Include "!eNULL" in SSL_DEFAULT_CIPHER_LIST to make sure that
2185 a ciphersuite string such as "DEFAULT:RSA" cannot enable
2186 authentication-only ciphersuites.
2189 *) Update the SSL_get_shared_ciphers() fix CVE-2006-3738 which was
2190 not complete and could lead to a possible single byte overflow
2191 (CVE-2007-5135) [Ben Laurie]
2193 Changes between 0.9.8d and 0.9.8e [23 Feb 2007]
2195 *) Since AES128 and AES256 (and similarly Camellia128 and
2196 Camellia256) share a single mask bit in the logic of
2197 ssl/ssl_ciph.c, the code for masking out disabled ciphers needs a
2198 kludge to work properly if AES128 is available and AES256 isn't
2199 (or if Camellia128 is available and Camellia256 isn't).
2202 *) Fix the BIT STRING encoding generated by crypto/ec/ec_asn1.c
2203 (within i2d_ECPrivateKey, i2d_ECPKParameters, i2d_ECParameters):
2204 When a point or a seed is encoded in a BIT STRING, we need to
2205 prevent the removal of trailing zero bits to get the proper DER
2206 encoding. (By default, crypto/asn1/a_bitstr.c assumes the case
2207 of a NamedBitList, for which trailing 0 bits need to be removed.)
2210 *) Have SSL/TLS server implementation tolerate "mismatched" record
2211 protocol version while receiving ClientHello even if the
2212 ClientHello is fragmented. (The server can't insist on the
2213 particular protocol version it has chosen before the ServerHello
2214 message has informed the client about his choice.)
2217 *) Add RFC 3779 support.
2218 [Rob Austein for ARIN, Ben Laurie]
2220 *) Load error codes if they are not already present instead of using a
2221 static variable. This allows them to be cleanly unloaded and reloaded.
2222 Improve header file function name parsing.
2225 *) extend SMTP and IMAP protocol emulation in s_client to use EHLO
2226 or CAPABILITY handshake as required by RFCs.
2229 Changes between 0.9.8c and 0.9.8d [28 Sep 2006]
2231 *) Introduce limits to prevent malicious keys being able to
2232 cause a denial of service. (CVE-2006-2940)
2233 [Steve Henson, Bodo Moeller]
2235 *) Fix ASN.1 parsing of certain invalid structures that can result
2236 in a denial of service. (CVE-2006-2937) [Steve Henson]
2238 *) Fix buffer overflow in SSL_get_shared_ciphers() function.
2239 (CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
2241 *) Fix SSL client code which could crash if connecting to a
2242 malicious SSLv2 server. (CVE-2006-4343)
2243 [Tavis Ormandy and Will Drewry, Google Security Team]
2245 *) Since 0.9.8b, ciphersuite strings naming explicit ciphersuites
2246 match only those. Before that, "AES256-SHA" would be interpreted
2247 as a pattern and match "AES128-SHA" too (since AES128-SHA got
2248 the same strength classification in 0.9.7h) as we currently only
2249 have a single AES bit in the ciphersuite description bitmap.
2250 That change, however, also applied to ciphersuite strings such as
2251 "RC4-MD5" that intentionally matched multiple ciphersuites --
2252 namely, SSL 2.0 ciphersuites in addition to the more common ones
2253 from SSL 3.0/TLS 1.0.
2255 So we change the selection algorithm again: Naming an explicit
2256 ciphersuite selects this one ciphersuite, and any other similar
2257 ciphersuite (same bitmap) from *other* protocol versions.
2258 Thus, "RC4-MD5" again will properly select both the SSL 2.0
2259 ciphersuite and the SSL 3.0/TLS 1.0 ciphersuite.
2261 Since SSL 2.0 does not have any ciphersuites for which the
2262 128/256 bit distinction would be relevant, this works for now.
2263 The proper fix will be to use different bits for AES128 and
2264 AES256, which would have avoided the problems from the beginning;
2265 however, bits are scarce, so we can only do this in a new release
2266 (not just a patchlevel) when we can change the SSL_CIPHER
2267 definition to split the single 'unsigned long mask' bitmap into
2268 multiple values to extend the available space.
2272 Changes between 0.9.8b and 0.9.8c [05 Sep 2006]
2274 *) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
2275 (CVE-2006-4339) [Ben Laurie and Google Security Team]
2277 *) Add AES IGE and biIGE modes.
2280 *) Change the Unix randomness entropy gathering to use poll() when
2281 possible instead of select(), since the latter has some
2282 undesirable limitations.
2283 [Darryl Miles via Richard Levitte and Bodo Moeller]
2285 *) Disable "ECCdraft" ciphersuites more thoroughly. Now special
2286 treatment in ssl/ssl_ciph.s makes sure that these ciphersuites
2287 cannot be implicitly activated as part of, e.g., the "AES" alias.
2288 However, please upgrade to OpenSSL 0.9.9[-dev] for
2289 non-experimental use of the ECC ciphersuites to get TLS extension
2290 support, which is required for curve and point format negotiation
2291 to avoid potential handshake problems.
2294 *) Disable rogue ciphersuites:
2296 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
2297 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
2298 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
2300 The latter two were purportedly from
2301 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
2304 Also deactivate the remaining ciphersuites from
2305 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
2306 unofficial, and the ID has long expired.
2309 *) Fix RSA blinding Heisenbug (problems sometimes occured on
2310 dual-core machines) and other potential thread-safety issues.
2313 *) Add the symmetric cipher Camellia (128-bit, 192-bit, 256-bit key
2314 versions), which is now available for royalty-free use
2315 (see http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html).
2316 Also, add Camellia TLS ciphersuites from RFC 4132.
2318 To minimize changes between patchlevels in the OpenSSL 0.9.8
2319 series, Camellia remains excluded from compilation unless OpenSSL
2320 is configured with 'enable-camellia'.
2323 *) Disable the padding bug check when compression is in use. The padding
2324 bug check assumes the first packet is of even length, this is not
2325 necessarily true if compresssion is enabled and can result in false
2326 positives causing handshake failure. The actual bug test is ancient
2327 code so it is hoped that implementations will either have fixed it by
2328 now or any which still have the bug do not support compression.
2331 Changes between 0.9.8a and 0.9.8b [04 May 2006]
2333 *) When applying a cipher rule check to see if string match is an explicit
2334 cipher suite and only match that one cipher suite if it is.
2337 *) Link in manifests for VC++ if needed.
2338 [Austin Ziegler <halostatue@gmail.com>]
2340 *) Update support for ECC-based TLS ciphersuites according to
2341 draft-ietf-tls-ecc-12.txt with proposed changes (but without
2342 TLS extensions, which are supported starting with the 0.9.9
2343 branch, not in the OpenSSL 0.9.8 branch).
2346 *) New functions EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free() to support
2347 opaque EVP_CIPHER_CTX handling.
2350 *) Fixes and enhancements to zlib compression code. We now only use
2351 "zlib1.dll" and use the default __cdecl calling convention on Win32
2352 to conform with the standards mentioned here:
2353 http://www.zlib.net/DLL_FAQ.txt
2354 Static zlib linking now works on Windows and the new --with-zlib-include
2355 --with-zlib-lib options to Configure can be used to supply the location
2356 of the headers and library. Gracefully handle case where zlib library
2360 *) Several fixes and enhancements to the OID generation code. The old code
2361 sometimes allowed invalid OIDs (1.X for X >= 40 for example), couldn't
2362 handle numbers larger than ULONG_MAX, truncated printing and had a
2363 non standard OBJ_obj2txt() behaviour.
2366 *) Add support for building of engines under engine/ as shared libraries
2367 under VC++ build system.
2370 *) Corrected the numerous bugs in the Win32 path splitter in DSO.
2371 Hopefully, we will not see any false combination of paths any more.
2374 Changes between 0.9.8 and 0.9.8a [11 Oct 2005]
2376 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
2377 (part of SSL_OP_ALL). This option used to disable the
2378 countermeasure against man-in-the-middle protocol-version
2379 rollback in the SSL 2.0 server implementation, which is a bad
2380 idea. (CVE-2005-2969)
2382 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
2383 for Information Security, National Institute of Advanced Industrial
2384 Science and Technology [AIST], Japan)]
2386 *) Add two function to clear and return the verify parameter flags.
2389 *) Keep cipherlists sorted in the source instead of sorting them at
2390 runtime, thus removing the need for a lock.
2393 *) Avoid some small subgroup attacks in Diffie-Hellman.
2394 [Nick Mathewson and Ben Laurie]
2396 *) Add functions for well-known primes.
2399 *) Extended Windows CE support.
2400 [Satoshi Nakamura and Andy Polyakov]
2402 *) Initialize SSL_METHOD structures at compile time instead of during
2403 runtime, thus removing the need for a lock.
2406 *) Make PKCS7_decrypt() work even if no certificate is supplied by
2407 attempting to decrypt each encrypted key in turn. Add support to
2411 Changes between 0.9.7h and 0.9.8 [05 Jul 2005]
2413 [NB: OpenSSL 0.9.7i and later 0.9.7 patch levels were released after
2416 *) Add libcrypto.pc and libssl.pc for those who feel they need them.
2419 *) Change CA.sh and CA.pl so they don't bundle the CSR and the private
2420 key into the same file any more.
2423 *) Add initial support for Win64, both IA64 and AMD64/x64 flavors.
2426 *) Add -utf8 command line and config file option to 'ca'.
2427 [Stefan <stf@udoma.org]
2429 *) Removed the macro des_crypt(), as it seems to conflict with some
2430 libraries. Use DES_crypt().
2433 *) Correct naming of the 'chil' and '4758cca' ENGINEs. This
2434 involves renaming the source and generated shared-libs for
2435 both. The engines will accept the corrected or legacy ids
2436 ('ncipher' and '4758_cca' respectively) when binding. NB,
2437 this only applies when building 'shared'.
2438 [Corinna Vinschen <vinschen@redhat.com> and Geoff Thorpe]
2440 *) Add attribute functions to EVP_PKEY structure. Modify
2441 PKCS12_create() to recognize a CSP name attribute and
2442 use it. Make -CSP option work again in pkcs12 utility.
2445 *) Add new functionality to the bn blinding code:
2446 - automatic re-creation of the BN_BLINDING parameters after
2447 a fixed number of uses (currently 32)
2448 - add new function for parameter creation
2449 - introduce flags to control the update behaviour of the
2450 BN_BLINDING parameters
2451 - hide BN_BLINDING structure
2452 Add a second BN_BLINDING slot to the RSA structure to improve
2453 performance when a single RSA object is shared among several
2457 *) Add support for DTLS.
2458 [Nagendra Modadugu <nagendra@cs.stanford.edu> and Ben Laurie]
2460 *) Add support for DER encoded private keys (SSL_FILETYPE_ASN1)
2461 to SSL_CTX_use_PrivateKey_file() and SSL_use_PrivateKey_file()
2464 *) Remove buggy and incompletet DH cert support from
2465 ssl/ssl_rsa.c and ssl/s3_both.c
2468 *) Use SHA-1 instead of MD5 as the default digest algorithm for
2469 the apps/openssl applications.
2472 *) Compile clean with "-Wall -Wmissing-prototypes
2473 -Wstrict-prototypes -Wmissing-declarations -Werror". Currently
2474 DEBUG_SAFESTACK must also be set.
2477 *) Change ./Configure so that certain algorithms can be disabled by default.
2478 The new counterpiece to "no-xxx" is "enable-xxx".
2480 The patented RC5 and MDC2 algorithms will now be disabled unless
2481 "enable-rc5" and "enable-mdc2", respectively, are specified.
2483 (IDEA remains enabled despite being patented. This is because IDEA
2484 is frequently required for interoperability, and there is no license
2485 fee for non-commercial use. As before, "no-idea" can be used to
2486 avoid this algorithm.)
2490 *) Add processing of proxy certificates (see RFC 3820). This work was
2491 sponsored by KTH (The Royal Institute of Technology in Stockholm) and
2492 EGEE (Enabling Grids for E-science in Europe).
2495 *) RC4 performance overhaul on modern architectures/implementations, such
2496 as Intel P4, IA-64 and AMD64.
2499 *) New utility extract-section.pl. This can be used specify an alternative
2500 section number in a pod file instead of having to treat each file as
2501 a separate case in Makefile. This can be done by adding two lines to the
2504 =for comment openssl_section:XXX
2506 The blank line is mandatory.
2510 *) New arguments -certform, -keyform and -pass for s_client and s_server
2511 to allow alternative format key and certificate files and passphrase
2515 *) New structure X509_VERIFY_PARAM which combines current verify parameters,
2516 update associated structures and add various utility functions.
2518 Add new policy related verify parameters, include policy checking in
2519 standard verify code. Enhance 'smime' application with extra parameters
2520 to support policy checking and print out.
2523 *) Add a new engine to support VIA PadLock ACE extensions in the VIA C3
2524 Nehemiah processors. These extensions support AES encryption in hardware
2525 as well as RNG (though RNG support is currently disabled).
2526 [Michal Ludvig <michal@logix.cz>, with help from Andy Polyakov]
2528 *) Deprecate BN_[get|set]_params() functions (they were ignored internally).
2531 *) New FIPS 180-2 algorithms, SHA-224/-256/-384/-512 are implemented.
2532 [Andy Polyakov and a number of other people]
2534 *) Improved PowerPC platform support. Most notably BIGNUM assembler
2535 implementation contributed by IBM.
2536 [Suresh Chari, Peter Waltenberg, Andy Polyakov]
2538 *) The new 'RSA_generate_key_ex' function now takes a BIGNUM for the public
2539 exponent rather than 'unsigned long'. There is a corresponding change to
2540 the new 'rsa_keygen' element of the RSA_METHOD structure.
2541 [Jelte Jansen, Geoff Thorpe]
2543 *) Functionality for creating the initial serial number file is now
2544 moved from CA.pl to the 'ca' utility with a new option -create_serial.
2546 (Before OpenSSL 0.9.7e, CA.pl used to initialize the serial
2547 number file to 1, which is bound to cause problems. To avoid
2548 the problems while respecting compatibility between different 0.9.7
2549 patchlevels, 0.9.7e employed 'openssl x509 -next_serial' in
2550 CA.pl for serial number initialization. With the new release 0.9.8,
2551 we can fix the problem directly in the 'ca' utility.)
2554 *) Reduced header interdepencies by declaring more opaque objects in
2555 ossl_typ.h. As a consequence, including some headers (eg. engine.h) will
2556 give fewer recursive includes, which could break lazy source code - so
2557 this change is covered by the OPENSSL_NO_DEPRECATED symbol. As always,
2558 developers should define this symbol when building and using openssl to
2559 ensure they track the recommended behaviour, interfaces, [etc], but
2560 backwards-compatible behaviour prevails when this isn't defined.
2563 *) New function X509_POLICY_NODE_print() which prints out policy nodes.
2566 *) Add new EVP function EVP_CIPHER_CTX_rand_key and associated functionality.
2567 This will generate a random key of the appropriate length based on the
2568 cipher context. The EVP_CIPHER can provide its own random key generation
2569 routine to support keys of a specific form. This is used in the des and
2570 3des routines to generate a key of the correct parity. Update S/MIME
2571 code to use new functions and hence generate correct parity DES keys.
2572 Add EVP_CHECK_DES_KEY #define to return an error if the key is not
2573 valid (weak or incorrect parity).
2576 *) Add a local set of CRLs that can be used by X509_verify_cert() as well
2577 as looking them up. This is useful when the verified structure may contain
2578 CRLs, for example PKCS#7 signedData. Modify PKCS7_verify() to use any CRLs
2579 present unless the new PKCS7_NO_CRL flag is asserted.
2582 *) Extend ASN1 oid configuration module. It now additionally accepts the
2585 shortName = some long name, 1.2.3.4
2588 *) Reimplemented the BN_CTX implementation. There is now no more static
2589 limitation on the number of variables it can handle nor the depth of the
2590 "stack" handling for BN_CTX_start()/BN_CTX_end() pairs. The stack
2591 information can now expand as required, and rather than having a single
2592 static array of bignums, BN_CTX now uses a linked-list of such arrays
2593 allowing it to expand on demand whilst maintaining the usefulness of
2594 BN_CTX's "bundling".
2597 *) Add a missing BN_CTX parameter to the 'rsa_mod_exp' callback in RSA_METHOD
2598 to allow all RSA operations to function using a single BN_CTX.
2601 *) Preliminary support for certificate policy evaluation and checking. This
2602 is initially intended to pass the tests outlined in "Conformance Testing
2603 of Relying Party Client Certificate Path Processing Logic" v1.07.
2606 *) bn_dup_expand() has been deprecated, it was introduced in 0.9.7 and
2607 remained unused and not that useful. A variety of other little bignum
2608 tweaks and fixes have also been made continuing on from the audit (see
2612 *) Constify all or almost all d2i, c2i, s2i and r2i functions, along with
2613 associated ASN1, EVP and SSL functions and old ASN1 macros.
2616 *) BN_zero() only needs to set 'top' and 'neg' to zero for correct results,
2617 and this should never fail. So the return value from the use of
2618 BN_set_word() (which can fail due to needless expansion) is now deprecated;
2619 if OPENSSL_NO_DEPRECATED is defined, BN_zero() is a void macro.
2622 *) BN_CTX_get() should return zero-valued bignums, providing the same
2623 initialised value as BN_new().
2624 [Geoff Thorpe, suggested by Ulf Möller]
2626 *) Support for inhibitAnyPolicy certificate extension.
2629 *) An audit of the BIGNUM code is underway, for which debugging code is
2630 enabled when BN_DEBUG is defined. This makes stricter enforcements on what
2631 is considered valid when processing BIGNUMs, and causes execution to
2632 assert() when a problem is discovered. If BN_DEBUG_RAND is defined,
2633 further steps are taken to deliberately pollute unused data in BIGNUM
2634 structures to try and expose faulty code further on. For now, openssl will
2635 (in its default mode of operation) continue to tolerate the inconsistent
2636 forms that it has tolerated in the past, but authors and packagers should
2637 consider trying openssl and their own applications when compiled with
2638 these debugging symbols defined. It will help highlight potential bugs in
2639 their own code, and will improve the test coverage for OpenSSL itself. At
2640 some point, these tighter rules will become openssl's default to improve
2641 maintainability, though the assert()s and other overheads will remain only
2642 in debugging configurations. See bn.h for more details.
2643 [Geoff Thorpe, Nils Larsch, Ulf Möller]
2645 *) BN_CTX_init() has been deprecated, as BN_CTX is an opaque structure
2646 that can only be obtained through BN_CTX_new() (which implicitly
2647 initialises it). The presence of this function only made it possible
2648 to overwrite an existing structure (and cause memory leaks).
2651 *) Because of the callback-based approach for implementing LHASH as a
2652 template type, lh_insert() adds opaque objects to hash-tables and
2653 lh_doall() or lh_doall_arg() are typically used with a destructor callback
2654 to clean up those corresponding objects before destroying the hash table
2655 (and losing the object pointers). So some over-zealous constifications in
2656 LHASH have been relaxed so that lh_insert() does not take (nor store) the
2657 objects as "const" and the lh_doall[_arg] callback wrappers are not
2658 prototyped to have "const" restrictions on the object pointers they are
2659 given (and so aren't required to cast them away any more).
2662 *) The tmdiff.h API was so ugly and minimal that our own timing utility
2663 (speed) prefers to use its own implementation. The two implementations
2664 haven't been consolidated as yet (volunteers?) but the tmdiff API has had
2665 its object type properly exposed (MS_TM) instead of casting to/from "char
2666 *". This may still change yet if someone realises MS_TM and "ms_time_***"
2667 aren't necessarily the greatest nomenclatures - but this is what was used
2668 internally to the implementation so I've used that for now.
2671 *) Ensure that deprecated functions do not get compiled when
2672 OPENSSL_NO_DEPRECATED is defined. Some "openssl" subcommands and a few of
2673 the self-tests were still using deprecated key-generation functions so
2674 these have been updated also.
2677 *) Reorganise PKCS#7 code to separate the digest location functionality
2678 into PKCS7_find_digest(), digest addtion into PKCS7_bio_add_digest().
2679 New function PKCS7_set_digest() to set the digest type for PKCS#7
2680 digestedData type. Add additional code to correctly generate the
2681 digestedData type and add support for this type in PKCS7 initialization
2685 *) New function PKCS7_set0_type_other() this initializes a PKCS7
2686 structure of type "other".
2689 *) Fix prime generation loop in crypto/bn/bn_prime.pl by making
2690 sure the loop does correctly stop and breaking ("division by zero")
2691 modulus operations are not performed. The (pre-generated) prime
2692 table crypto/bn/bn_prime.h was already correct, but it could not be
2693 re-generated on some platforms because of the "division by zero"
2694 situation in the script.
2695 [Ralf S. Engelschall]
2697 *) Update support for ECC-based TLS ciphersuites according to
2698 draft-ietf-tls-ecc-03.txt: the KDF1 key derivation function with
2699 SHA-1 now is only used for "small" curves (where the
2700 representation of a field element takes up to 24 bytes); for
2701 larger curves, the field element resulting from ECDH is directly
2702 used as premaster secret.
2703 [Douglas Stebila (Sun Microsystems Laboratories)]
2705 *) Add code for kP+lQ timings to crypto/ec/ectest.c, and add SEC2
2706 curve secp160r1 to the tests.
2707 [Douglas Stebila (Sun Microsystems Laboratories)]
2709 *) Add the possibility to load symbols globally with DSO.
2710 [Götz Babin-Ebell <babin-ebell@trustcenter.de> via Richard Levitte]
2712 *) Add the functions ERR_set_mark() and ERR_pop_to_mark() for better
2713 control of the error stack.
2716 *) Add support for STORE in ENGINE.
2719 *) Add the STORE type. The intention is to provide a common interface
2720 to certificate and key stores, be they simple file-based stores, or
2721 HSM-type store, or LDAP stores, or...
2722 NOTE: The code is currently UNTESTED and isn't really used anywhere.
2725 *) Add a generic structure called OPENSSL_ITEM. This can be used to
2726 pass a list of arguments to any function as well as provide a way
2727 for a function to pass data back to the caller.
2730 *) Add the functions BUF_strndup() and BUF_memdup(). BUF_strndup()
2731 works like BUF_strdup() but can be used to duplicate a portion of
2732 a string. The copy gets NUL-terminated. BUF_memdup() duplicates
2736 *) Add the function sk_find_ex() which works like sk_find(), but will
2737 return an index to an element even if an exact match couldn't be
2738 found. The index is guaranteed to point at the element where the
2739 searched-for key would be inserted to preserve sorting order.
2742 *) Add the function OBJ_bsearch_ex() which works like OBJ_bsearch() but
2743 takes an extra flags argument for optional functionality. Currently,
2744 the following flags are defined:
2746 OBJ_BSEARCH_VALUE_ON_NOMATCH
2747 This one gets OBJ_bsearch_ex() to return a pointer to the first
2748 element where the comparing function returns a negative or zero
2751 OBJ_BSEARCH_FIRST_VALUE_ON_MATCH
2752 This one gets OBJ_bsearch_ex() to return a pointer to the first
2753 element where the comparing function returns zero. This is useful
2754 if there are more than one element where the comparing function
2758 *) Make it possible to create self-signed certificates with 'openssl ca'
2759 in such a way that the self-signed certificate becomes part of the
2760 CA database and uses the same mechanisms for serial number generation
2761 as all other certificate signing. The new flag '-selfsign' enables
2762 this functionality. Adapt CA.sh and CA.pl.in.
2765 *) Add functionality to check the public key of a certificate request
2766 against a given private. This is useful to check that a certificate
2767 request can be signed by that key (self-signing).
2770 *) Make it possible to have multiple active certificates with the same
2771 subject in the CA index file. This is done only if the keyword
2772 'unique_subject' is set to 'no' in the main CA section (default
2773 if 'CA_default') of the configuration file. The value is saved
2774 with the database itself in a separate index attribute file,
2775 named like the index file with '.attr' appended to the name.
2778 *) Generate muti valued AVAs using '+' notation in config files for
2782 *) Support for nameConstraints certificate extension.
2785 *) Support for policyConstraints certificate extension.
2788 *) Support for policyMappings certificate extension.
2791 *) Make sure the default DSA_METHOD implementation only uses its
2792 dsa_mod_exp() and/or bn_mod_exp() handlers if they are non-NULL,
2793 and change its own handlers to be NULL so as to remove unnecessary
2794 indirection. This lets alternative implementations fallback to the
2795 default implementation more easily.
2798 *) Support for directoryName in GeneralName related extensions
2802 *) Make it possible to link applications using Makefile.shared.
2803 Make that possible even when linking against static libraries!
2806 *) Support for single pass processing for S/MIME signing. This now
2807 means that S/MIME signing can be done from a pipe, in addition
2808 cleartext signing (multipart/signed type) is effectively streaming
2809 and the signed data does not need to be all held in memory.
2811 This is done with a new flag PKCS7_STREAM. When this flag is set
2812 PKCS7_sign() only initializes the PKCS7 structure and the actual signing
2813 is done after the data is output (and digests calculated) in
2814 SMIME_write_PKCS7().
2817 *) Add full support for -rpath/-R, both in shared libraries and
2818 applications, at least on the platforms where it's known how
2822 *) In crypto/ec/ec_mult.c, implement fast point multiplication with
2823 precomputation, based on wNAF splitting: EC_GROUP_precompute_mult()
2824 will now compute a table of multiples of the generator that
2825 makes subsequent invocations of EC_POINTs_mul() or EC_POINT_mul()
2826 faster (notably in the case of a single point multiplication,
2827 scalar * generator).
2828 [Nils Larsch, Bodo Moeller]
2830 *) IPv6 support for certificate extensions. The various extensions
2831 which use the IP:a.b.c.d can now take IPv6 addresses using the
2832 formats of RFC1884 2.2 . IPv6 addresses are now also displayed
2836 *) Added an ENGINE that implements RSA by performing private key
2837 exponentiations with the GMP library. The conversions to and from
2838 GMP's mpz_t format aren't optimised nor are any montgomery forms
2839 cached, and on x86 it appears OpenSSL's own performance has caught up.
2840 However there are likely to be other architectures where GMP could
2841 provide a boost. This ENGINE is not built in by default, but it can be
2842 specified at Configure time and should be accompanied by the necessary
2843 linker additions, eg;
2844 ./config -DOPENSSL_USE_GMP -lgmp
2847 *) "openssl engine" will not display ENGINE/DSO load failure errors when
2848 testing availability of engines with "-t" - the old behaviour is
2849 produced by increasing the feature's verbosity with "-tt".
2852 *) ECDSA routines: under certain error conditions uninitialized BN objects
2853 could be freed. Solution: make sure initialization is performed early
2854 enough. (Reported and fix supplied by Nils Larsch <nla@trustcenter.de>
2858 *) Key-generation can now be implemented in RSA_METHOD, DSA_METHOD
2859 and DH_METHOD (eg. by ENGINE implementations) to override the normal
2860 software implementations. For DSA and DH, parameter generation can
2861 also be overriden by providing the appropriate method callbacks.
2864 *) Change the "progress" mechanism used in key-generation and
2865 primality testing to functions that take a new BN_GENCB pointer in
2866 place of callback/argument pairs. The new API functions have "_ex"
2867 postfixes and the older functions are reimplemented as wrappers for
2868 the new ones. The OPENSSL_NO_DEPRECATED symbol can be used to hide
2869 declarations of the old functions to help (graceful) attempts to
2870 migrate to the new functions. Also, the new key-generation API
2871 functions operate on a caller-supplied key-structure and return
2872 success/failure rather than returning a key or NULL - this is to
2873 help make "keygen" another member function of RSA_METHOD etc.
2875 Example for using the new callback interface:
2877 int (*my_callback)(int a, int b, BN_GENCB *cb) = ...;
2881 BN_GENCB_set(&my_cb, my_callback, my_arg);
2883 return BN_is_prime_ex(some_bignum, BN_prime_checks, NULL, &cb);
2884 /* For the meaning of a, b in calls to my_callback(), see the
2885 * documentation of the function that calls the callback.
2886 * cb will point to my_cb; my_arg can be retrieved as cb->arg.
2887 * my_callback should return 1 if it wants BN_is_prime_ex()
2888 * to continue, or 0 to stop.
2893 *) Change the ZLIB compression method to be stateful, and make it
2894 available to TLS with the number defined in
2895 draft-ietf-tls-compression-04.txt.
2898 *) Add the ASN.1 structures and functions for CertificatePair, which
2899 is defined as follows (according to X.509_4thEditionDraftV6.pdf):
2901 CertificatePair ::= SEQUENCE {
2902 forward [0] Certificate OPTIONAL,
2903 reverse [1] Certificate OPTIONAL,
2904 -- at least one of the pair shall be present -- }
2906 Also implement the PEM functions to read and write certificate
2907 pairs, and defined the PEM tag as "CERTIFICATE PAIR".
2909 This needed to be defined, mostly for the sake of the LDAP
2910 attribute crossCertificatePair, but may prove useful elsewhere as
2914 *) Make it possible to inhibit symlinking of shared libraries in
2915 Makefile.shared, for Cygwin's sake.
2918 *) Extend the BIGNUM API by creating a function
2919 void BN_set_negative(BIGNUM *a, int neg);
2920 and a macro that behave like
2921 int BN_is_negative(const BIGNUM *a);
2923 to avoid the need to access 'a->neg' directly in applications.
2926 *) Implement fast modular reduction for pseudo-Mersenne primes
2927 used in NIST curves (crypto/bn/bn_nist.c, crypto/ec/ecp_nist.c).
2928 EC_GROUP_new_curve_GFp() will now automatically use this
2930 [Nils Larsch <nla@trustcenter.de>]
2932 *) Add new lock type (CRYPTO_LOCK_BN).
2935 *) Change the ENGINE framework to automatically load engines
2936 dynamically from specific directories unless they could be
2937 found to already be built in or loaded. Move all the
2938 current engines except for the cryptodev one to a new
2940 The engines in engines/ are built as shared libraries if
2941 the "shared" options was given to ./Configure or ./config.
2942 Otherwise, they are inserted in libcrypto.a.
2943 /usr/local/ssl/engines is the default directory for dynamic
2944 engines, but that can be overriden at configure time through
2945 the usual use of --prefix and/or --openssldir, and at run
2946 time with the environment variable OPENSSL_ENGINES.
2947 [Geoff Thorpe and Richard Levitte]
2949 *) Add Makefile.shared, a helper makefile to build shared
2950 libraries. Addapt Makefile.org.
2953 *) Add version info to Win32 DLLs.
2954 [Peter 'Luna' Runestig" <peter@runestig.com>]
2956 *) Add new 'medium level' PKCS#12 API. Certificates and keys
2957 can be added using this API to created arbitrary PKCS#12
2958 files while avoiding the low level API.
2960 New options to PKCS12_create(), key or cert can be NULL and
2961 will then be omitted from the output file. The encryption
2962 algorithm NIDs can be set to -1 for no encryption, the mac
2963 iteration count can be set to 0 to omit the mac.
2965 Enhance pkcs12 utility by making the -nokeys and -nocerts
2966 options work when creating a PKCS#12 file. New option -nomac
2967 to omit the mac, NONE can be set for an encryption algorithm.
2968 New code is modified to use the enhanced PKCS12_create()
2969 instead of the low level API.
2972 *) Extend ASN1 encoder to support indefinite length constructed
2973 encoding. This can output sequences tags and octet strings in
2974 this form. Modify pk7_asn1.c to support indefinite length
2975 encoding. This is experimental and needs additional code to
2976 be useful, such as an ASN1 bio and some enhanced streaming
2979 Extend template encode functionality so that tagging is passed
2980 down to the template encoder.
2983 *) Let 'openssl req' fail if an argument to '-newkey' is not
2984 recognized instead of using RSA as a default.
2987 *) Add support for ECC-based ciphersuites from draft-ietf-tls-ecc-01.txt.
2988 As these are not official, they are not included in "ALL";
2989 the "ECCdraft" ciphersuite group alias can be used to select them.
2990 [Vipul Gupta and Sumit Gupta (Sun Microsystems Laboratories)]
2992 *) Add ECDH engine support.
2993 [Nils Gura and Douglas Stebila (Sun Microsystems Laboratories)]
2995 *) Add ECDH in new directory crypto/ecdh/.
2996 [Douglas Stebila (Sun Microsystems Laboratories)]
2998 *) Let BN_rand_range() abort with an error after 100 iterations
2999 without success (which indicates a broken PRNG).
3002 *) Change BN_mod_sqrt() so that it verifies that the input value
3003 is really the square of the return value. (Previously,
3004 BN_mod_sqrt would show GIGO behaviour.)
3007 *) Add named elliptic curves over binary fields from X9.62, SECG,
3008 and WAP/WTLS; add OIDs that were still missing.
3010 [Sheueling Chang Shantz and Douglas Stebila
3011 (Sun Microsystems Laboratories)]
3013 *) Extend the EC library for elliptic curves over binary fields
3014 (new files ec2_smpl.c, ec2_smpt.c, ec2_mult.c in crypto/ec/).
3017 EC_GF2m_simple_method
3021 EC_GROUP_new_curve_GF2m
3022 EC_GROUP_set_curve_GF2m
3023 EC_GROUP_get_curve_GF2m
3024 EC_POINT_set_affine_coordinates_GF2m
3025 EC_POINT_get_affine_coordinates_GF2m
3026 EC_POINT_set_compressed_coordinates_GF2m
3028 Point compression for binary fields is disabled by default for
3029 patent reasons (compile with OPENSSL_EC_BIN_PT_COMP defined to
3032 As binary polynomials are represented as BIGNUMs, various members
3033 of the EC_GROUP and EC_POINT data structures can be shared
3034 between the implementations for prime fields and binary fields;
3035 the above ..._GF2m functions (except for EX_GROUP_new_curve_GF2m)
3036 are essentially identical to their ..._GFp counterparts.
3037 (For simplicity, the '..._GFp' prefix has been dropped from
3038 various internal method names.)
3040 An internal 'field_div' method (similar to 'field_mul' and
3041 'field_sqr') has been added; this is used only for binary fields.
3043 [Sheueling Chang Shantz and Douglas Stebila
3044 (Sun Microsystems Laboratories)]
3046 *) Optionally dispatch EC_POINT_mul(), EC_POINT_precompute_mult()
3047 through methods ('mul', 'precompute_mult').
3049 The generic implementations (now internally called 'ec_wNAF_mul'
3050 and 'ec_wNAF_precomputed_mult') remain the default if these
3051 methods are undefined.
3053 [Sheueling Chang Shantz and Douglas Stebila
3054 (Sun Microsystems Laboratories)]
3056 *) New function EC_GROUP_get_degree, which is defined through
3057 EC_METHOD. For curves over prime fields, this returns the bit
3058 length of the modulus.
3060 [Sheueling Chang Shantz and Douglas Stebila
3061 (Sun Microsystems Laboratories)]
3063 *) New functions EC_GROUP_dup, EC_POINT_dup.
3064 (These simply call ..._new and ..._copy).
3066 [Sheueling Chang Shantz and Douglas Stebila
3067 (Sun Microsystems Laboratories)]
3069 *) Add binary polynomial arithmetic software in crypto/bn/bn_gf2m.c.
3070 Polynomials are represented as BIGNUMs (where the sign bit is not
3071 used) in the following functions [macros]:
3074 BN_GF2m_sub [= BN_GF2m_add]
3075 BN_GF2m_mod [wrapper for BN_GF2m_mod_arr]
3076 BN_GF2m_mod_mul [wrapper for BN_GF2m_mod_mul_arr]
3077 BN_GF2m_mod_sqr [wrapper for BN_GF2m_mod_sqr_arr]
3079 BN_GF2m_mod_exp [wrapper for BN_GF2m_mod_exp_arr]
3080 BN_GF2m_mod_sqrt [wrapper for BN_GF2m_mod_sqrt_arr]
3081 BN_GF2m_mod_solve_quad [wrapper for BN_GF2m_mod_solve_quad_arr]
3082 BN_GF2m_cmp [= BN_ucmp]
3084 (Note that only the 'mod' functions are actually for fields GF(2^m).
3085 BN_GF2m_add() is misnomer, but this is for the sake of consistency.)
3087 For some functions, an the irreducible polynomial defining a
3088 field can be given as an 'unsigned int[]' with strictly
3089 decreasing elements giving the indices of those bits that are set;
3090 i.e., p[] represents the polynomial
3091 f(t) = t^p[0] + t^p[1] + ... + t^p[k]
3093 p[0] > p[1] > ... > p[k] = 0.
3094 This applies to the following functions:
3099 BN_GF2m_mod_inv_arr [wrapper for BN_GF2m_mod_inv]
3100 BN_GF2m_mod_div_arr [wrapper for BN_GF2m_mod_div]
3102 BN_GF2m_mod_sqrt_arr
3103 BN_GF2m_mod_solve_quad_arr
3107 Conversion can be performed by the following functions:
3112 bntest.c has additional tests for binary polynomial arithmetic.
3114 Two implementations for BN_GF2m_mod_div() are available.
3115 The default algorithm simply uses BN_GF2m_mod_inv() and
3116 BN_GF2m_mod_mul(). The alternative algorithm is compiled in only
3117 if OPENSSL_SUN_GF2M_DIV is defined (patent pending; read the
3118 copyright notice in crypto/bn/bn_gf2m.c before enabling it).
3120 [Sheueling Chang Shantz and Douglas Stebila
3121 (Sun Microsystems Laboratories)]
3123 *) Add new error code 'ERR_R_DISABLED' that can be used when some
3124 functionality is disabled at compile-time.
3125 [Douglas Stebila <douglas.stebila@sun.com>]
3127 *) Change default behaviour of 'openssl asn1parse' so that more
3128 information is visible when viewing, e.g., a certificate:
3130 Modify asn1_parse2 (crypto/asn1/asn1_par.c) so that in non-'dump'
3131 mode the content of non-printable OCTET STRINGs is output in a
3132 style similar to INTEGERs, but with '[HEX DUMP]' prepended to
3133 avoid the appearance of a printable string.
3134 [Nils Larsch <nla@trustcenter.de>]
3136 *) Add 'asn1_flag' and 'asn1_form' member to EC_GROUP with access
3138 EC_GROUP_set_asn1_flag()
3139 EC_GROUP_get_asn1_flag()
3140 EC_GROUP_set_point_conversion_form()
3141 EC_GROUP_get_point_conversion_form()
3142 These control ASN1 encoding details:
3143 - Curves (i.e., groups) are encoded explicitly unless asn1_flag
3144 has been set to OPENSSL_EC_NAMED_CURVE.
3145 - Points are encoded in uncompressed form by default; options for
3146 asn1_for are as for point2oct, namely
3147 POINT_CONVERSION_COMPRESSED
3148 POINT_CONVERSION_UNCOMPRESSED
3149 POINT_CONVERSION_HYBRID
3151 Also add 'seed' and 'seed_len' members to EC_GROUP with access
3154 EC_GROUP_get0_seed()
3155 EC_GROUP_get_seed_len()
3156 This is used only for ASN1 purposes (so far).
3157 [Nils Larsch <nla@trustcenter.de>]
3159 *) Add 'field_type' member to EC_METHOD, which holds the NID
3160 of the appropriate field type OID. The new function
3161 EC_METHOD_get_field_type() returns this value.
3162 [Nils Larsch <nla@trustcenter.de>]
3167 EC_POINT_point2hex()
3168 EC_POINT_hex2point()
3169 providing useful interfaces to EC_POINT_point2oct() and
3170 EC_POINT_oct2point().
3171 [Nils Larsch <nla@trustcenter.de>]
3173 *) Change internals of the EC library so that the functions
3174 EC_GROUP_set_generator()
3175 EC_GROUP_get_generator()
3176 EC_GROUP_get_order()
3177 EC_GROUP_get_cofactor()
3178 are implemented directly in crypto/ec/ec_lib.c and not dispatched
3179 to methods, which would lead to unnecessary code duplication when
3180 adding different types of curves.
3181 [Nils Larsch <nla@trustcenter.de> with input by Bodo Moeller]
3183 *) Implement compute_wNAF (crypto/ec/ec_mult.c) without BIGNUM
3184 arithmetic, and such that modified wNAFs are generated
3185 (which avoid length expansion in many cases).
3188 *) Add a function EC_GROUP_check_discriminant() (defined via
3189 EC_METHOD) that verifies that the curve discriminant is non-zero.
3191 Add a function EC_GROUP_check() that makes some sanity tests
3192 on a EC_GROUP, its generator and order. This includes
3193 EC_GROUP_check_discriminant().
3194 [Nils Larsch <nla@trustcenter.de>]
3196 *) Add ECDSA in new directory crypto/ecdsa/.
3198 Add applications 'openssl ecparam' and 'openssl ecdsa'
3199 (these are based on 'openssl dsaparam' and 'openssl dsa').
3201 ECDSA support is also included in various other files across the
3202 library. Most notably,
3203 - 'openssl req' now has a '-newkey ecdsa:file' option;
3204 - EVP_PKCS82PKEY (crypto/evp/evp_pkey.c) now can handle ECDSA;
3205 - X509_PUBKEY_get (crypto/asn1/x_pubkey.c) and
3206 d2i_PublicKey (crypto/asn1/d2i_pu.c) have been modified to make
3207 them suitable for ECDSA where domain parameters must be
3208 extracted before the specific public key;
3209 - ECDSA engine support has been added.
3210 [Nils Larsch <nla@trustcenter.de>]
3212 *) Include some named elliptic curves, and add OIDs from X9.62,
3213 SECG, and WAP/WTLS. Each curve can be obtained from the new
3215 EC_GROUP_new_by_curve_name(),
3216 and the list of available named curves can be obtained with
3217 EC_get_builtin_curves().
3218 Also add a 'curve_name' member to EC_GROUP objects, which can be
3220 EC_GROUP_set_curve_name()
3221 EC_GROUP_get_curve_name()
3222 [Nils Larsch <larsch@trustcenter.de, Bodo Moeller]
3224 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
3225 was actually never needed) and in BN_mul(). The removal in BN_mul()
3226 required a small change in bn_mul_part_recursive() and the addition
3227 of the functions bn_cmp_part_words(), bn_sub_part_words() and
3228 bn_add_part_words(), which do the same thing as bn_cmp_words(),
3229 bn_sub_words() and bn_add_words() except they take arrays with
3233 Changes between 0.9.7l and 0.9.7m [23 Feb 2007]
3235 *) Cleanse PEM buffers before freeing them since they may contain
3237 [Benjamin Bennett <ben@psc.edu>]
3239 *) Include "!eNULL" in SSL_DEFAULT_CIPHER_LIST to make sure that
3240 a ciphersuite string such as "DEFAULT:RSA" cannot enable
3241 authentication-only ciphersuites.
3244 *) Since AES128 and AES256 share a single mask bit in the logic of
3245 ssl/ssl_ciph.c, the code for masking out disabled ciphers needs a
3246 kludge to work properly if AES128 is available and AES256 isn't.
3249 *) Expand security boundary to match 1.1.1 module.
3252 *) Remove redundant features: hash file source, editing of test vectors
3253 modify fipsld to use external fips_premain.c signature.
3256 *) New perl script mkfipsscr.pl to create shell scripts or batch files to
3257 run algorithm test programs.
3260 *) Make algorithm test programs more tolerant of whitespace.
3263 *) Have SSL/TLS server implementation tolerate "mismatched" record
3264 protocol version while receiving ClientHello even if the
3265 ClientHello is fragmented. (The server can't insist on the
3266 particular protocol version it has chosen before the ServerHello
3267 message has informed the client about his choice.)
3270 *) Load error codes if they are not already present instead of using a
3271 static variable. This allows them to be cleanly unloaded and reloaded.
3274 Changes between 0.9.7k and 0.9.7l [28 Sep 2006]
3276 *) Introduce limits to prevent malicious keys being able to
3277 cause a denial of service. (CVE-2006-2940)
3278 [Steve Henson, Bodo Moeller]
3280 *) Fix ASN.1 parsing of certain invalid structures that can result
3281 in a denial of service. (CVE-2006-2937) [Steve Henson]
3283 *) Fix buffer overflow in SSL_get_shared_ciphers() function.
3284 (CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
3286 *) Fix SSL client code which could crash if connecting to a
3287 malicious SSLv2 server. (CVE-2006-4343)
3288 [Tavis Ormandy and Will Drewry, Google Security Team]
3290 *) Change ciphersuite string processing so that an explicit
3291 ciphersuite selects this one ciphersuite (so that "AES256-SHA"
3292 will no longer include "AES128-SHA"), and any other similar
3293 ciphersuite (same bitmap) from *other* protocol versions (so that
3294 "RC4-MD5" will still include both the SSL 2.0 ciphersuite and the
3295 SSL 3.0/TLS 1.0 ciphersuite). This is a backport combining
3296 changes from 0.9.8b and 0.9.8d.
3299 Changes between 0.9.7j and 0.9.7k [05 Sep 2006]
3301 *) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
3302 (CVE-2006-4339) [Ben Laurie and Google Security Team]
3304 *) Change the Unix randomness entropy gathering to use poll() when
3305 possible instead of select(), since the latter has some
3306 undesirable limitations.
3307 [Darryl Miles via Richard Levitte and Bodo Moeller]
3309 *) Disable rogue ciphersuites:
3311 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
3312 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
3313 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
3315 The latter two were purportedly from
3316 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
3319 Also deactive the remaining ciphersuites from
3320 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
3321 unofficial, and the ID has long expired.
3324 *) Fix RSA blinding Heisenbug (problems sometimes occured on
3325 dual-core machines) and other potential thread-safety issues.
3328 Changes between 0.9.7i and 0.9.7j [04 May 2006]
3330 *) Adapt fipsld and the build system to link against the validated FIPS
3331 module in FIPS mode.
3334 *) Fixes for VC++ 2005 build under Windows.
3337 *) Add new Windows build target VC-32-GMAKE for VC++. This uses GNU make
3338 from a Windows bash shell such as MSYS. It is autodetected from the
3339 "config" script when run from a VC++ environment. Modify standard VC++
3340 build to use fipscanister.o from the GNU make build.
3343 Changes between 0.9.7h and 0.9.7i [14 Oct 2005]
3345 *) Wrapped the definition of EVP_MAX_MD_SIZE in a #ifdef OPENSSL_FIPS.
3346 The value now differs depending on if you build for FIPS or not.
3347 BEWARE! A program linked with a shared FIPSed libcrypto can't be
3348 safely run with a non-FIPSed libcrypto, as it may crash because of
3349 the difference induced by this change.
3352 Changes between 0.9.7g and 0.9.7h [11 Oct 2005]
3354 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
3355 (part of SSL_OP_ALL). This option used to disable the
3356 countermeasure against man-in-the-middle protocol-version
3357 rollback in the SSL 2.0 server implementation, which is a bad
3358 idea. (CVE-2005-2969)
3360 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
3361 for Information Security, National Institute of Advanced Industrial
3362 Science and Technology [AIST], Japan)]
3364 *) Minimal support for X9.31 signatures and PSS padding modes. This is
3365 mainly for FIPS compliance and not fully integrated at this stage.
3368 *) For DSA signing, unless DSA_FLAG_NO_EXP_CONSTTIME is set, perform
3369 the exponentiation using a fixed-length exponent. (Otherwise,
3370 the information leaked through timing could expose the secret key
3371 after many signatures; cf. Bleichenbacher's attack on DSA with
3375 *) Make a new fixed-window mod_exp implementation the default for
3376 RSA, DSA, and DH private-key operations so that the sequence of
3377 squares and multiplies and the memory access pattern are
3378 independent of the particular secret key. This will mitigate
3379 cache-timing and potential related attacks.
3381 BN_mod_exp_mont_consttime() is the new exponentiation implementation,
3382 and this is automatically used by BN_mod_exp_mont() if the new flag
3383 BN_FLG_EXP_CONSTTIME is set for the exponent. RSA, DSA, and DH
3384 will use this BN flag for private exponents unless the flag
3385 RSA_FLAG_NO_EXP_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME, or
3386 DH_FLAG_NO_EXP_CONSTTIME, respectively, is set.
3388 [Matthew D Wood (Intel Corp), with some changes by Bodo Moeller]
3390 *) Change the client implementation for SSLv23_method() and
3391 SSLv23_client_method() so that is uses the SSL 3.0/TLS 1.0
3392 Client Hello message format if the SSL_OP_NO_SSLv2 option is set.
3393 (Previously, the SSL 2.0 backwards compatible Client Hello
3394 message format would be used even with SSL_OP_NO_SSLv2.)
3397 *) Add support for smime-type MIME parameter in S/MIME messages which some
3401 *) New function BN_MONT_CTX_set_locked() to set montgomery parameters in
3402 a threadsafe manner. Modify rsa code to use new function and add calls
3403 to dsa and dh code (which had race conditions before).
3406 *) Include the fixed error library code in the C error file definitions
3407 instead of fixing them up at runtime. This keeps the error code
3408 structures constant.
3411 Changes between 0.9.7f and 0.9.7g [11 Apr 2005]
3413 [NB: OpenSSL 0.9.7h and later 0.9.7 patch levels were released after
3416 *) Fixes for newer kerberos headers. NB: the casts are needed because
3417 the 'length' field is signed on one version and unsigned on another
3418 with no (?) obvious way to tell the difference, without these VC++
3419 complains. Also the "definition" of FAR (blank) is no longer included
3420 nor is the error ENOMEM. KRB5_PRIVATE has to be set to 1 to pick up
3421 some needed definitions.
3424 *) Undo Cygwin change.
3427 *) Added support for proxy certificates according to RFC 3820.
3428 Because they may be a security thread to unaware applications,
3429 they must be explicitely allowed in run-time. See
3430 docs/HOWTO/proxy_certificates.txt for further information.
3433 Changes between 0.9.7e and 0.9.7f [22 Mar 2005]
3435 *) Use (SSL_RANDOM_VALUE - 4) bytes of pseudo random data when generating
3436 server and client random values. Previously
3437 (SSL_RANDOM_VALUE - sizeof(time_t)) would be used which would result in
3438 less random data when sizeof(time_t) > 4 (some 64 bit platforms).
3440 This change has negligible security impact because:
3442 1. Server and client random values still have 24 bytes of pseudo random
3445 2. Server and client random values are sent in the clear in the initial
3448 3. The master secret is derived using the premaster secret (48 bytes in
3449 size for static RSA ciphersuites) as well as client server and random
3452 The OpenSSL team would like to thank the UK NISCC for bringing this issue
3455 [Stephen Henson, reported by UK NISCC]
3457 *) Use Windows randomness collection on Cygwin.
3460 *) Fix hang in EGD/PRNGD query when communication socket is closed
3461 prematurely by EGD/PRNGD.
3462 [Darren Tucker <dtucker@zip.com.au> via Lutz Jänicke, resolves #1014]
3464 *) Prompt for pass phrases when appropriate for PKCS12 input format.
3467 *) Back-port of selected performance improvements from development
3468 branch, as well as improved support for PowerPC platforms.
3471 *) Add lots of checks for memory allocation failure, error codes to indicate
3472 failure and freeing up memory if a failure occurs.
3473 [Nauticus Networks SSL Team <openssl@nauticusnet.com>, Steve Henson]
3475 *) Add new -passin argument to dgst.
3478 *) Perform some character comparisons of different types in X509_NAME_cmp:
3479 this is needed for some certificates that reencode DNs into UTF8Strings
3480 (in violation of RFC3280) and can't or wont issue name rollover
3484 *) Make an explicit check during certificate validation to see that
3485 the CA setting in each certificate on the chain is correct. As a
3486 side effect always do the following basic checks on extensions,
3487 not just when there's an associated purpose to the check:
3489 - if there is an unhandled critical extension (unless the user
3490 has chosen to ignore this fault)
3491 - if the path length has been exceeded (if one is set at all)
3492 - that certain extensions fit the associated purpose (if one has
3496 Changes between 0.9.7d and 0.9.7e [25 Oct 2004]
3498 *) Avoid a race condition when CRLs are checked in a multi threaded
3499 environment. This would happen due to the reordering of the revoked
3500 entries during signature checking and serial number lookup. Now the
3501 encoding is cached and the serial number sort performed under a lock.
3502 Add new STACK function sk_is_sorted().
3505 *) Add Delta CRL to the extension code.
3508 *) Various fixes to s3_pkt.c so alerts are sent properly.
3509 [David Holmes <d.holmes@f5.com>]
3511 *) Reduce the chances of duplicate issuer name and serial numbers (in
3512 violation of RFC3280) using the OpenSSL certificate creation utilities.
3513 This is done by creating a random 64 bit value for the initial serial
3514 number when a serial number file is created or when a self signed
3515 certificate is created using 'openssl req -x509'. The initial serial
3516 number file is created using 'openssl x509 -next_serial' in CA.pl
3517 rather than being initialized to 1.
3520 Changes between 0.9.7c and 0.9.7d [17 Mar 2004]
3522 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
3523 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
3524 [Joe Orton, Steve Henson]
3526 *) Fix flaw in SSL/TLS handshaking when using Kerberos ciphersuites
3528 [Joe Orton, Steve Henson]
3530 *) Make it possible to have multiple active certificates with the same
3531 subject in the CA index file. This is done only if the keyword
3532 'unique_subject' is set to 'no' in the main CA section (default
3533 if 'CA_default') of the configuration file. The value is saved
3534 with the database itself in a separate index attribute file,
3535 named like the index file with '.attr' appended to the name.
3538 *) X509 verify fixes. Disable broken certificate workarounds when
3539 X509_V_FLAGS_X509_STRICT is set. Check CRL issuer has cRLSign set if
3540 keyUsage extension present. Don't accept CRLs with unhandled critical
3541 extensions: since verify currently doesn't process CRL extensions this
3542 rejects a CRL with *any* critical extensions. Add new verify error codes
3546 *) When creating an OCSP nonce use an OCTET STRING inside the extnValue.
3547 A clarification of RFC2560 will require the use of OCTET STRINGs and
3548 some implementations cannot handle the current raw format. Since OpenSSL
3549 copies and compares OCSP nonces as opaque blobs without any attempt at
3550 parsing them this should not create any compatibility issues.
3553 *) New md flag EVP_MD_CTX_FLAG_REUSE this allows md_data to be reused when
3554 calling EVP_MD_CTX_copy_ex() to avoid calling OPENSSL_malloc(). Without
3555 this HMAC (and other) operations are several times slower than OpenSSL
3559 *) Print out GeneralizedTime and UTCTime in ASN1_STRING_print_ex().
3560 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
3562 *) Use the correct content when signing type "other".
3565 Changes between 0.9.7b and 0.9.7c [30 Sep 2003]
3567 *) Fix various bugs revealed by running the NISCC test suite:
3569 Stop out of bounds reads in the ASN1 code when presented with
3570 invalid tags (CVE-2003-0543 and CVE-2003-0544).
3572 Free up ASN1_TYPE correctly if ANY type is invalid (CVE-2003-0545).
3574 If verify callback ignores invalid public key errors don't try to check
3575 certificate signature with the NULL public key.
3579 *) New -ignore_err option in ocsp application to stop the server
3580 exiting on the first error in a request.
3583 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
3584 if the server requested one: as stated in TLS 1.0 and SSL 3.0
3588 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
3589 extra data after the compression methods not only for TLS 1.0
3590 but also for SSL 3.0 (as required by the specification).
3591 [Bodo Moeller; problem pointed out by Matthias Loepfe]
3593 *) Change X509_certificate_type() to mark the key as exported/exportable
3594 when it's 512 *bits* long, not 512 bytes.
3597 *) Change AES_cbc_encrypt() so it outputs exact multiple of
3598 blocks during encryption.
3601 *) Various fixes to base64 BIO and non blocking I/O. On write
3602 flushes were not handled properly if the BIO retried. On read
3603 data was not being buffered properly and had various logic bugs.
3604 This also affects blocking I/O when the data being decoded is a
3608 *) Various S/MIME bugfixes and compatibility changes:
3609 output correct application/pkcs7 MIME type if
3610 PKCS7_NOOLDMIMETYPE is set. Tolerate some broken signatures.
3611 Output CR+LF for EOL if PKCS7_CRLFEOL is set (this makes opening
3612 of files as .eml work). Correctly handle very long lines in MIME
3616 Changes between 0.9.7a and 0.9.7b [10 Apr 2003]
3618 *) Countermeasure against the Klima-Pokorny-Rosa extension of
3619 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
3620 a protocol version number mismatch like a decryption error
3621 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
3624 *) Turn on RSA blinding by default in the default implementation
3625 to avoid a timing attack. Applications that don't want it can call
3626 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
3627 They would be ill-advised to do so in most cases.
3628 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
3630 *) Change RSA blinding code so that it works when the PRNG is not
3631 seeded (in this case, the secret RSA exponent is abused as
3632 an unpredictable seed -- if it is not unpredictable, there
3633 is no point in blinding anyway). Make RSA blinding thread-safe
3634 by remembering the creator's thread ID in rsa->blinding and
3635 having all other threads use local one-time blinding factors
3636 (this requires more computation than sharing rsa->blinding, but
3637 avoids excessive locking; and if an RSA object is not shared
3638 between threads, blinding will still be very fast).
3641 *) Fixed a typo bug that would cause ENGINE_set_default() to set an
3642 ENGINE as defaults for all supported algorithms irrespective of
3643 the 'flags' parameter. 'flags' is now honoured, so applications
3644 should make sure they are passing it correctly.
3647 *) Target "mingw" now allows native Windows code to be generated in
3648 the Cygwin environment as well as with the MinGW compiler.
3651 Changes between 0.9.7 and 0.9.7a [19 Feb 2003]
3653 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
3654 via timing by performing a MAC computation even if incorrrect
3655 block cipher padding has been found. This is a countermeasure
3656 against active attacks where the attacker has to distinguish
3657 between bad padding and a MAC verification error. (CVE-2003-0078)
3659 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
3660 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
3661 Martin Vuagnoux (EPFL, Ilion)]
3663 *) Make the no-err option work as intended. The intention with no-err
3664 is not to have the whole error stack handling routines removed from
3665 libcrypto, it's only intended to remove all the function name and
3666 reason texts, thereby removing some of the footprint that may not
3667 be interesting if those errors aren't displayed anyway.
3669 NOTE: it's still possible for any application or module to have it's
3670 own set of error texts inserted. The routines are there, just not
3671 used by default when no-err is given.
3674 *) Add support for FreeBSD on IA64.
3675 [dirk.meyer@dinoex.sub.org via Richard Levitte, resolves #454]
3677 *) Adjust DES_cbc_cksum() so it returns the same value as the MIT
3678 Kerberos function mit_des_cbc_cksum(). Before this change,
3679 the value returned by DES_cbc_cksum() was like the one from
3680 mit_des_cbc_cksum(), except the bytes were swapped.
3681 [Kevin Greaney <Kevin.Greaney@hp.com> and Richard Levitte]
3683 *) Allow an application to disable the automatic SSL chain building.
3684 Before this a rather primitive chain build was always performed in
3685 ssl3_output_cert_chain(): an application had no way to send the
3686 correct chain if the automatic operation produced an incorrect result.
3688 Now the chain builder is disabled if either:
3690 1. Extra certificates are added via SSL_CTX_add_extra_chain_cert().
3692 2. The mode flag SSL_MODE_NO_AUTO_CHAIN is set.
3694 The reasoning behind this is that an application would not want the
3695 auto chain building to take place if extra chain certificates are
3696 present and it might also want a means of sending no additional
3697 certificates (for example the chain has two certificates and the
3701 *) Add the possibility to build without the ENGINE framework.
3702 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
3704 *) Under Win32 gmtime() can return NULL: check return value in
3705 OPENSSL_gmtime(). Add error code for case where gmtime() fails.
3708 *) DSA routines: under certain error conditions uninitialized BN objects
3709 could be freed. Solution: make sure initialization is performed early
3710 enough. (Reported and fix supplied by Ivan D Nestlerode <nestler@MIT.EDU>,
3711 Nils Larsch <nla@trustcenter.de> via PR#459)
3714 *) Another fix for SSLv2 session ID handling: the session ID was incorrectly
3715 checked on reconnect on the client side, therefore session resumption
3716 could still fail with a "ssl session id is different" error. This
3717 behaviour is masked when SSL_OP_ALL is used due to
3718 SSL_OP_MICROSOFT_SESS_ID_BUG being set.
3719 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
3720 followup to PR #377.
3723 *) IA-32 assembler support enhancements: unified ELF targets, support
3724 for SCO/Caldera platforms, fix for Cygwin shared build.
projects / openssl.git / blob