5 Changes between 0.9.4 and 0.9.5 [xx XXX 1999]
7 *) Add the possibility to add extra information to the memory leak
8 detecting output, to form tracebacks, showing from where each
9 allocation was originated. Also updated sid code to be multi-
13 *) Add options -text and -noout to pkcs7 utility and delets the
14 encryption options which never did anything. Update docs.
17 *) Add options to some of the utilities to allow the pass phrase
18 to be included on either the command line (not recommended on
19 OSes like Unix) or read from the environment. Update the
20 manpages and fix a few bugs.
23 *) Add a few manpages for some of the openssl commands.
26 *) Fix the -revoke option in ca. It was freeing up memory twice,
27 leaking and not finding already revoked certificates.
30 *) Extensive changes to support certificate auxiliary information.
31 This involves the use of X509_CERT_AUX structure and X509_AUX
32 functions. An X509_AUX function such as PEM_read_X509_AUX()
33 can still read in a certificate file in the usual way but it
34 will also read in any additional "auxiliary information". By
35 doing things this way a fair degree of compatability can be
36 retained: existing certificates can have this information added
37 using the new 'x509' options.
39 Current auxiliary information includes an "alias" and some trust
40 settings. The trust settings will ultimately be used in enhanced
41 certificate chain verification routines: currently a certificate
42 can only be trusted if it is self signed and then it is trusted
46 *) Fix assembler for Alpha (tested only on DEC OSF not Linux or *BSD). The
47 problem was that one of the replacement routines had not been working since
48 SSLeay releases. For now the offending routine has been replaced with
49 non-optimised assembler. Even so, this now gives around 95% performance
50 improvement for 1024 bit RSA signs.
53 *) Hack to fix PKCS#7 decryption when used with some unorthodox RC2
54 handling. Most clients have the effective key size in bits equal to
55 the key length in bits: so a 40 bit RC2 key uses a 40 bit (5 byte) key.
56 A few however don't do this and instead use the size of the decrypted key
57 to determine the RC2 key length and the AlgorithmIdentifier to determine
58 the effective key length. In this case the effective key lenth can still
59 be 40 bits but the key length can be 168 bits for example. This is fixed
60 by manually forcing an RC2 key into the EVP_PKEY structure because the
61 EVP code can't currently handle unusual RC2 key sizes: it always assumes
62 the key length and effective key length are equal.
65 *) Add a bunch of functions that should simplify the creation of
66 X509_NAME structures. Now you should be able to do:
67 X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, "Steve", -1, -1, 0);
68 and have it automatically work out the correct field type and fill in
69 the structures. The more adventurous can try:
70 X509_NAME_add_entry_by_txt(nm, field, MBSTRING_UTF8, str, -1, -1, 0);
71 and it will (hopefully) work out the correct multibyte encoding.
74 *) Change the 'req' utility to use the new field handling and multibyte
75 copy routines. Before the DN field creation was handled in an ad hoc
76 way in req, ca, and x509 which was rather broken and didn't support
77 BMPStrings or UTF8Strings. Since some software doesn't implement
78 BMPStrings or UTF8Strings yet, they can be enabled using the config file
79 using the dirstring_type option. See the new comment in the default
80 openssl.cnf for more info.
83 *) Make crypto/rand/md_rand.c more robust:
84 - Assure unique random numbers after fork().
85 - Make sure that concurrent threads access the global counter and
86 md serializably so that we never lose entropy in them
87 or use exactly the same state in multiple threads.
88 Access to the large state is not always serializable because
89 the additional locking could be a performance killer, and
90 md should be large enough anyway.
93 *) New file apps/app_rand.c with commonly needed functionality
94 for handling the random seed file.
96 Use the random seed file in some applications that previously did not:
98 dsaparam -genkey (which also ignored its `-rand' option),
102 Except on systems with /dev/urandom, it is crucial to have a random
103 seed file at least for key creation, DSA signing, and for DH exchanges;
104 for RSA signatures we could do without one.
106 gendh and gendsa (unlike genrsa) used to read only the first byte
107 of each file listed in the `-rand' option. The function as previously
108 found in genrsa is now in app_rand.c and is used by all programs
109 that support `-rand'.
112 *) In RAND_write_file, use mode 0600 for creating files;
113 don't just chmod when it may be too late.
116 *) Report an error from X509_STORE_load_locations
117 when X509_LOOKUP_load_file or X509_LOOKUP_add_dir failed.
120 *) New function ASN1_mbstring_copy() this copies a string in either
121 ASCII, Unicode, Universal (4 bytes per character) or UTF8 format
122 into an ASN1_STRING type. A mask of permissible types is passed
123 and it chooses the "minimal" type to use or an error if not type
127 *) Add function equivalents to the various macros in asn1.h. The old
128 macros are retained with an M_ prefix. Code inside the library can
129 use the M_ macros. External code (including the openssl utility)
130 should *NOT* in order to be "shared library friendly".
133 *) Add various functions that can check a certificate's extensions
134 to see if it usable for various purposes such as SSL client,
135 server or S/MIME and CAs of these types. This is currently
136 VERY EXPERIMENTAL but will ultimately be used for certificate chain
137 verification. Also added a -purpose flag to x509 utility to
138 print out all the purposes.
141 *) Add a CRYPTO_EX_DATA to X509 certificate structure and associated
145 *) New X509V3_{X509,CRL,REVOKED}_get_d2i() functions. These will search
146 for, obtain and decode and extension and obtain its critical flag.
147 This allows all the necessary extension code to be handled in a
148 single function call.
151 *) RC4 tune-up featuring 30-40% performance improvement on most RISC
152 platforms. See crypto/rc4/rc4_enc.c for further details.
155 *) New -noout option to asn1parse. This causes no output to be produced
156 its main use is when combined with -strparse and -out to extract data
157 from a file (which may not be in ASN.1 format).
160 *) Fix for pkcs12 program. It was hashing an invalid certificate pointer
161 when producing the local key id.
162 [Richard Levitte <levitte@stacken.kth.se>]
164 *) New option -dhparam in s_server. This allows a DH parameter file to be
165 stated explicitly. If it is not stated then it tries the first server
166 certificate file. The previous behaviour hard coded the filename
170 *) Add -pubin and -pubout options to the rsa and dsa commands. These allow
171 a public key to be input or output. For example:
172 openssl rsa -in key.pem -pubout -out pubkey.pem
173 Also added necessary DSA public key functions to handle this.
176 *) Fix so PKCS7_dataVerify() doesn't crash if no certificates are contained
177 in the message. This was handled by allowing
178 X509_find_by_issuer_and_serial() to tolerate a NULL passed to it.
179 [Steve Henson, reported by Sampo Kellomaki <sampo@mail.neuronio.pt>]
181 *) Fix for bug in d2i_ASN1_bytes(): other ASN1 functions add an extra null
182 to the end of the strings whereas this didn't. This would cause problems
183 if strings read with d2i_ASN1_bytes() were later modified.
184 [Steve Henson, reported by Arne Ansper <arne@ats.cyber.ee>]
186 *) Fix for base64 decode bug. When a base64 bio reads only one line of
187 data and it contains EOF it will end up returning an error. This is
188 caused by input 46 bytes long. The cause is due to the way base64
189 BIOs find the start of base64 encoded data. They do this by trying a
190 trial decode on each line until they find one that works. When they
191 do a flag is set and it starts again knowing it can pass all the
192 data directly through the decoder. Unfortunately it doesn't reset
193 the context it uses. This means that if EOF is reached an attempt
194 is made to pass two EOFs through the context and this causes the
195 resulting error. This can also cause other problems as well. As is
196 usual with these problems it takes *ages* to find and the fix is
197 trivial: move one line.
198 [Steve Henson, reported by ian@uns.ns.ac.yu (Ivan Nejgebauer) ]
200 *) Ugly workaround to get s_client and s_server working under Windows. The
201 old code wouldn't work because it needed to select() on sockets and the
202 tty (for keypresses and to see if data could be written). Win32 only
203 supports select() on sockets so we select() with a 1s timeout on the
204 sockets and then see if any characters are waiting to be read, if none
205 are present then we retry, we also assume we can always write data to
206 the tty. This isn't nice because the code then blocks until we've
207 received a complete line of data and it is effectively polling the
208 keyboard at 1s intervals: however it's quite a bit better than not
209 working at all :-) A dedicated Windows application might handle this
210 with an event loop for example.
213 *) Enhance RSA_METHOD structure. Now there are two extra methods, rsa_sign
214 and rsa_verify. When the RSA_FLAGS_SIGN_VER option is set these functions
215 will be called when RSA_sign() and RSA_verify() are used. This is useful
216 if rsa_pub_dec() and rsa_priv_enc() equivalents are not available.
217 For this to work properly RSA_public_decrypt() and RSA_private_encrypt()
218 should *not* be used: RSA_sign() and RSA_verify() must be used instead.
219 This necessitated the support of an extra signature type NID_md5_sha1
220 for SSL signatures and modifications to the SSL library to use it instead
221 of calling RSA_public_decrypt() and RSA_private_encrypt().
224 *) Add new -verify -CAfile and -CApath options to the crl program, these
225 will lookup a CRL issuers certificate and verify the signature in a
226 similar way to the verify program. Tidy up the crl program so it
227 no longer acesses structures directly. Make the ASN1 CRL parsing a bit
228 less strict. It will now permit CRL extensions even if it is not
229 a V2 CRL: this will allow it to tolerate some broken CRLs.
232 *) Initialize all non-automatic variables each time one of the openssl
233 sub-programs is started (this is necessary as they may be started
234 multiple times from the "OpenSSL>" prompt).
235 [Lennart Bang, Bodo Moeller]
237 *) Preliminary compilation option RSA_NULL which disables RSA crypto without
238 removing all other RSA functionality (this is what NO_RSA does). This
239 is so (for example) those in the US can disable those operations covered
240 by the RSA patent while allowing storage and parsing of RSA keys and RSA
244 *) Non-copying interface to BIO pairs.
245 (still largely untested)
248 *) New function ANS1_tag2str() to convert an ASN1 tag to a descriptive
249 ASCII string. This was handled independently in various places before.
252 *) New functions UTF8_getc() and UTF8_putc() that parse and generate
253 UTF8 strings a character at a time.
256 *) Use client_version from client hello to select the protocol
257 (s23_srvr.c) and for RSA client key exchange verification
258 (s3_srvr.c), as required by the SSL 3.0/TLS 1.0 specifications.
261 *) Add various utility functions to handle SPKACs, these were previously
262 handled by poking round in the structure internals. Added new function
263 NETSCAPE_SPKI_print() to print out SPKAC and a new utility 'spkac' to
264 print, verify and generate SPKACs. Based on an original idea from
265 Massimiliano Pala <madwolf@comune.modena.it> but extensively modified.
268 *) RIPEMD160 is operational on all platforms and is back in 'make test'.
271 *) Allow the config file extension section to be overwritten on the
272 command line. Based on an original idea from Massimiliano Pala
273 <madwolf@comune.modena.it>. The new option is called -extensions
274 and can be applied to ca, req and x509. Also -reqexts to override
275 the request extensions in req and -crlexts to override the crl extensions
279 *) Add new feature to the SPKAC handling in ca. Now you can include
280 the same field multiple times by preceding it by "XXXX." for example:
283 this is the same syntax as used in the req config file.
286 *) Allow certificate extensions to be added to certificate requests. These
287 are specified in a 'req_extensions' option of the req section of the
288 config file. They can be printed out with the -text option to req but
289 are otherwise ignored at present.
292 *) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first
293 data read consists of only the final block it would not decrypted because
294 EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
295 A misplaced 'break' also meant the decrypted final block might not be
296 copied until the next read.
299 *) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
300 a few extra parameters to the DH structure: these will be useful if
301 for example we want the value of 'q' or implement X9.42 DH.
304 *) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
305 provides hooks that allow the default DSA functions or functions on a
306 "per key" basis to be replaced. This allows hardware acceleration and
307 hardware key storage to be handled without major modification to the
308 library. Also added low level modexp hooks and CRYPTO_EX structure and
309 associated functions.
312 *) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
313 as "read only": it can't be written to and the buffer it points to will
314 not be freed. Reading from a read only BIO is much more efficient than
315 a normal memory BIO. This was added because there are several times when
316 an area of memory needs to be read from a BIO. The previous method was
317 to create a memory BIO and write the data to it, this results in two
318 copies of the data and an O(n^2) reading algorithm. There is a new
319 function BIO_new_mem_buf() which creates a read only memory BIO from
320 an area of memory. Also modified the PKCS#7 routines to use read only
324 *) Bugfix: ssl23_get_client_hello did not work properly when called in
325 state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
326 a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
327 but a retry condition occured while trying to read the rest.
330 *) The PKCS7_ENC_CONTENT_new() function was setting the content type as
331 NID_pkcs7_encrypted by default: this was wrong since this should almost
332 always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
333 the encrypted data type: this is a more sensible place to put it and it
334 allows the PKCS#12 code to be tidied up that duplicated this
338 *) Changed obj_dat.pl script so it takes its input and output files on
339 the command line. This should avoid shell escape redirection problems
343 *) Initial support for certificate extension requests, these are included
344 in things like Xenroll certificate requests. Included functions to allow
345 extensions to be obtained and added.
348 *) -crlf option to s_client and s_server for sending newlines as
349 CRLF (as required by many protocols).
352 Changes between 0.9.3a and 0.9.4 [09 Aug 1999]
354 *) Install libRSAglue.a when OpenSSL is built with RSAref.
355 [Ralf S. Engelschall]
357 *) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
358 [Andrija Antonijevic <TheAntony2@bigfoot.com>]
360 *) Fix -startdate and -enddate (which was missing) arguments to 'ca'
364 *) New function DSA_dup_DH, which duplicates DSA parameters/keys as
365 DH parameters/keys (q is lost during that conversion, but the resulting
366 DH parameters contain its length).
368 For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
369 much faster than DH_generate_parameters (which creates parameters
370 where p = 2*q + 1), and also the smaller q makes DH computations
371 much more efficient (160-bit exponentiation instead of 1024-bit
372 exponentiation); so this provides a convenient way to support DHE
373 ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
374 utter importance to use
375 SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
377 SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
378 when such DH parameters are used, because otherwise small subgroup
379 attacks may become possible!
382 *) Avoid memory leak in i2d_DHparams.
385 *) Allow the -k option to be used more than once in the enc program:
386 this allows the same encrypted message to be read by multiple recipients.
389 *) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
390 an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
391 it will always use the numerical form of the OID, even if it has a short
395 *) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
396 method only got called if p,q,dmp1,dmq1,iqmp components were present,
397 otherwise bn_mod_exp was called. In the case of hardware keys for example
398 no private key components need be present and it might store extra data
399 in the RSA structure, which cannot be accessed from bn_mod_exp.
400 By setting RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for
401 private key operations.
404 *) Added support for SPARC Linux.
407 *) pem_password_cb function type incompatibly changed from
408 typedef int pem_password_cb(char *buf, int size, int rwflag);
410 ....(char *buf, int size, int rwflag, void *userdata);
411 so that applications can pass data to their callbacks:
412 The PEM[_ASN1]_{read,write}... functions and macros now take an
413 additional void * argument, which is just handed through whenever
414 the password callback is called.
415 [Damien Miller <dmiller@ilogic.com.au>; tiny changes by Bodo Moeller]
417 New function SSL_CTX_set_default_passwd_cb_userdata.
419 Compatibility note: As many C implementations push function arguments
420 onto the stack in reverse order, the new library version is likely to
421 interoperate with programs that have been compiled with the old
422 pem_password_cb definition (PEM_whatever takes some data that
423 happens to be on the stack as its last argument, and the callback
424 just ignores this garbage); but there is no guarantee whatsoever that
427 *) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
428 (both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
429 problems not only on Windows, but also on some Unix platforms.
430 To avoid problematic command lines, these definitions are now in an
431 auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
432 for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
435 *) MIPS III/IV assembler module is reimplemented.
438 *) More DES library cleanups: remove references to srand/rand and
439 delete an unused file.
442 *) Add support for the the free Netwide assembler (NASM) under Win32,
443 since not many people have MASM (ml) and it can be hard to obtain.
444 This is currently experimental but it seems to work OK and pass all
445 the tests. Check out INSTALL.W32 for info.
448 *) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
449 without temporary keys kept an extra copy of the server key,
450 and connections with temporary keys did not free everything in case
454 *) New function RSA_check_key and new openssl rsa option -check
455 for verifying the consistency of RSA keys.
456 [Ulf Moeller, Bodo Moeller]
458 *) Various changes to make Win32 compile work:
459 1. Casts to avoid "loss of data" warnings in p5_crpt2.c
460 2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
461 comparison" warnings.
462 3. Add sk_<TYPE>_sort to DEF file generator and do make update.
465 *) Add a debugging option to PKCS#5 v2 key generation function: when
466 you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
467 derived keys are printed to stderr.
470 *) Copy the flags in ASN1_STRING_dup().
471 [Roman E. Pavlov <pre@mo.msk.ru>]
473 *) The x509 application mishandled signing requests containing DSA
474 keys when the signing key was also DSA and the parameters didn't match.
476 It was supposed to omit the parameters when they matched the signing key:
477 the verifying software was then supposed to automatically use the CA's
478 parameters if they were absent from the end user certificate.
480 Omitting parameters is no longer recommended. The test was also
481 the wrong way round! This was probably due to unusual behaviour in
482 EVP_cmp_parameters() which returns 1 if the parameters match.
483 This meant that parameters were omitted when they *didn't* match and
484 the certificate was useless. Certificates signed with 'ca' didn't have
486 [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
488 *) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
489 The interface is as follows:
491 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
492 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
493 "off" is now the default.
494 The library internally uses
495 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
496 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
497 to disable memory-checking temporarily.
499 Some inconsistent states that previously were possible (and were
500 even the default) are now avoided.
502 -DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
503 with each memory chunk allocated; this is occasionally more helpful
504 than just having a counter.
506 -DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
508 -DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
512 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
513 which largely parallels "options", but is for changing API behaviour,
514 whereas "options" are about protocol behaviour.
515 Initial "mode" flags are:
517 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
518 a single record has been written.
519 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
520 retries use the same buffer location.
521 (But all of the contents must be
525 *) Bugfix: SSL_set_mode ignored its parameter, only SSL_CTX_set_mode
528 *) Fix problems with no-hmac etc.
529 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
531 *) New functions RSA_get_default_method(), RSA_set_method() and
532 RSA_get_method(). These allows replacement of RSA_METHODs without having
533 to mess around with the internals of an RSA structure.
536 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
537 Also really enable memory leak checks in openssl.c and in some
539 [Chad C. Mulligan, Bodo Moeller]
541 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
542 up the length of negative integers. This has now been simplified to just
543 store the length when it is first determined and use it later, rather
544 than trying to keep track of where data is copied and updating it to
546 [Steve Henson, reported by Brien Wheeler
547 <bwheeler@authentica-security.com>]
549 *) Add a new function PKCS7_signatureVerify. This allows the verification
550 of a PKCS#7 signature but with the signing certificate passed to the
551 function itself. This contrasts with PKCS7_dataVerify which assumes the
552 certificate is present in the PKCS#7 structure. This isn't always the
553 case: certificates can be omitted from a PKCS#7 structure and be
554 distributed by "out of band" means (such as a certificate database).
557 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
558 function prototypes in pem.h, also change util/mkdef.pl to add the
559 necessary function names.
562 *) mk1mf.pl (used by Windows builds) did not properly read the
563 options set by Configure in the top level Makefile, and Configure
564 was not even able to write more than one option correctly.
565 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
568 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
569 file to be loaded from a BIO or FILE pointer. The BIO version will
570 for example allow memory BIOs to contain config info.
573 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
574 Whoever hopes to achieve shared-library compatibility across versions
575 must use this, not the compile-time macro.
576 (Exercise 0.9.4: Which is the minimum library version required by
578 Note: All this applies only to multi-threaded programs, others don't
582 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
583 through a BIO pair triggered the default case, i.e.
584 SSLerr(...,SSL_R_UNKNOWN_STATE).
587 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
588 can use the SSL library even if none of the specific BIOs is
592 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
593 for the encoded length.
594 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
596 *) Add initial documentation of the X509V3 functions.
599 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
600 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
601 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
602 secure PKCS#8 private key format with a high iteration count.
605 *) Fix determination of Perl interpreter: A perl or perl5
606 _directory_ in $PATH was also accepted as the interpreter.
607 [Ralf S. Engelschall]
609 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
610 wrong with it but it was very old and did things like calling
611 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
615 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
616 to use the new extension code.
619 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
620 with macros. This should make it easier to change their form, add extra
621 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
625 *) Add to configuration table a new entry that can specify an alternative
626 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
627 according to Mark Crispin <MRC@Panda.COM>.
631 *) DES CBC did not update the IV. Weird.
634 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
635 Changing the behaviour of the former might break existing programs --
636 where IV updating is needed, des_ncbc_encrypt can be used.
639 *) When bntest is run from "make test" it drives bc to check its
640 calculations, as well as internally checking them. If an internal check
641 fails, it needs to cause bc to give a non-zero result or make test carries
642 on without noticing the failure. Fixed.
645 *) DES library cleanups.
648 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
649 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
650 ciphers. NOTE: although the key derivation function has been verified
651 against some published test vectors it has not been extensively tested
652 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
656 *) Instead of "mkdir -p", which is not fully portable, use new
657 Perl script "util/mkdir-p.pl".
660 *) Rewrite the way password based encryption (PBE) is handled. It used to
661 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
662 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
663 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
664 the 'parameter' field of the AlgorithmIdentifier is passed to the
665 underlying key generation function so it must do its own ASN1 parsing.
666 This has also changed the EVP_PBE_CipherInit() function which now has a
667 'parameter' argument instead of literal salt and iteration count values
668 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
671 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
672 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
673 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
674 KEY" because this clashed with PKCS#8 unencrypted string. Since this
675 value was just used as a "magic string" and not used directly its
676 value doesn't matter.
679 *) Introduce some semblance of const correctness to BN. Shame C doesn't
683 *) "linux-sparc64" configuration (ultrapenguin).
684 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
685 "linux-sparc" configuration.
686 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
688 *) config now generates no-xxx options for missing ciphers.
691 *) Support the EBCDIC character set (work in progress).
692 File ebcdic.c not yet included because it has a different license.
693 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
695 *) Support BS2000/OSD-POSIX.
696 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
698 *) Make callbacks for key generation use void * instead of char *.
701 *) Make S/MIME samples compile (not yet tested).
704 *) Additional typesafe stacks.
707 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
711 Changes between 0.9.3 and 0.9.3a [29 May 1999]
713 *) New configuration variant "sco5-gcc".
715 *) Updated some demos.
716 [Sean O Riordain, Wade Scholine]
718 *) Add missing BIO_free at exit of pkcs12 application.
721 *) Fix memory leak in conf.c.
724 *) Updates for Win32 to assembler version of MD5.
727 *) Set #! path to perl in apps/der_chop to where we found it
728 instead of using a fixed path.
731 *) SHA library changes for irix64-mips4-cc.
734 *) Improvements for VMS support.
738 Changes between 0.9.2b and 0.9.3 [24 May 1999]
740 *) Bignum library bug fix. IRIX 6 passes "make test" now!
741 This also avoids the problems with SC4.2 and unpatched SC5.
742 [Andy Polyakov <appro@fy.chalmers.se>]
744 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
745 These are required because of the typesafe stack would otherwise break
746 existing code. If old code used a structure member which used to be STACK
747 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
748 sk_num or sk_value it would produce an error because the num, data members
749 are not present in STACK_OF. Now it just produces a warning. sk_set
750 replaces the old method of assigning a value to sk_value
751 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
752 that does this will no longer work (and should use sk_set instead) but
753 this could be regarded as a "questionable" behaviour anyway.
756 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
757 correctly handle encrypted S/MIME data.
760 *) Change type of various DES function arguments from des_cblock
761 (which means, in function argument declarations, pointer to char)
762 to des_cblock * (meaning pointer to array with 8 char elements),
763 which allows the compiler to do more typechecking; it was like
764 that back in SSLeay, but with lots of ugly casts.
766 Introduce new type const_des_cblock.
769 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
770 problems: find RecipientInfo structure that matches recipient certificate
771 and initialise the ASN1 structures properly based on passed cipher.
774 *) Belatedly make the BN tests actually check the results.
777 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
778 to and from BNs: it was completely broken. New compilation option
779 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
780 key elements as negative integers.
783 *) Reorganize and speed up MD5.
784 [Andy Polyakov <appro@fy.chalmers.se>]
787 [Richard Levitte <richard@levitte.org>]
789 *) New option -out to asn1parse to allow the parsed structure to be
790 output to a file. This is most useful when combined with the -strparse
791 option to examine the output of things like OCTET STRINGS.
794 *) Make SSL library a little more fool-proof by not requiring any longer
795 that SSL_set_{accept,connect}_state be called before
796 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
797 in many applications because usually everything *appeared* to work as
798 intended anyway -- now it really works as intended).
801 *) Move openssl.cnf out of lib/.
804 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
805 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
806 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
807 [Ralf S. Engelschall]
809 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
810 handle PKCS#7 enveloped data properly.
811 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
813 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
814 copying pointers. The cert_st handling is changed by this in
815 various ways (and thus what used to be known as ctx->default_cert
816 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
817 any longer when s->cert does not give us what we need).
818 ssl_cert_instantiate becomes obsolete by this change.
819 As soon as we've got the new code right (possibly it already is?),
820 we have solved a couple of bugs of the earlier code where s->cert
821 was used as if it could not have been shared with other SSL structures.
823 Note that using the SSL API in certain dirty ways now will result
824 in different behaviour than observed with earlier library versions:
825 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
826 does not influence s as it used to.
828 In order to clean up things more thoroughly, inside SSL_SESSION
829 we don't use CERT any longer, but a new structure SESS_CERT
830 that holds per-session data (if available); currently, this is
831 the peer's certificate chain and, for clients, the server's certificate
832 and temporary key. CERT holds only those values that can have
833 meaningful defaults in an SSL_CTX.
836 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
837 from the internal representation. Various PKCS#7 fixes: remove some
838 evil casts and set the enc_dig_alg field properly based on the signing
842 *) Allow PKCS#12 password to be set from the command line or the
843 environment. Let 'ca' get its config file name from the environment
844 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
848 *) Allow certificate policies extension to use an IA5STRING for the
849 organization field. This is contrary to the PKIX definition but
850 VeriSign uses it and IE5 only recognises this form. Document 'x509'
854 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
855 without disallowing inline assembler and the like for non-pedantic builds.
858 *) Support Borland C++ builder.
859 [Janez Jere <jj@void.si>, modified by Ulf Möller]
864 *) SHA-1 cleanups and performance enhancements.
865 [Andy Polyakov <appro@fy.chalmers.se>]
867 *) Sparc v8plus assembler for the bignum library.
868 [Andy Polyakov <appro@fy.chalmers.se>]
870 *) Accept any -xxx and +xxx compiler options in Configure.
873 *) Update HPUX configuration.
876 *) Add missing sk_<type>_unshift() function to safestack.h
877 [Ralf S. Engelschall]
879 *) New function SSL_CTX_use_certificate_chain_file that sets the
880 "extra_cert"s in addition to the certificate. (This makes sense
881 only for "PEM" format files, as chains as a whole are not
885 *) Support verify_depth from the SSL API.
886 x509_vfy.c had what can be considered an off-by-one-error:
887 Its depth (which was not part of the external interface)
888 was actually counting the number of certificates in a chain;
889 now it really counts the depth.
892 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
893 instead of X509err, which often resulted in confusing error
894 messages since the error codes are not globally unique
895 (e.g. an alleged error in ssl3_accept when a certificate
896 didn't match the private key).
898 *) New function SSL_CTX_set_session_id_context that allows to set a default
899 value (so that you don't need SSL_set_session_id_context for each
900 connection using the SSL_CTX).
903 *) OAEP decoding bug fix.
906 *) Support INSTALL_PREFIX for package builders, as proposed by
910 *) New Configure options "threads" and "no-threads". For systems
911 where the proper compiler options are known (currently Solaris
912 and Linux), "threads" is the default.
915 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
918 *) Install various scripts to $(OPENSSLDIR)/misc, not to
919 $(INSTALLTOP)/bin -- they shouldn't clutter directories
920 such as /usr/local/bin.
923 *) "make linux-shared" to build shared libraries.
924 [Niels Poppe <niels@netbox.org>]
926 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
929 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
930 extension adding in x509 utility.
933 *) Remove NOPROTO sections and error code comments.
936 *) Partial rewrite of the DEF file generator to now parse the ANSI
940 *) New Configure options --prefix=DIR and --openssldir=DIR.
943 *) Complete rewrite of the error code script(s). It is all now handled
944 by one script at the top level which handles error code gathering,
945 header rewriting and C source file generation. It should be much better
946 than the old method: it now uses a modified version of Ulf's parser to
947 read the ANSI prototypes in all header files (thus the old K&R definitions
948 aren't needed for error creation any more) and do a better job of
949 translating function codes into names. The old 'ASN1 error code imbedded
950 in a comment' is no longer necessary and it doesn't use .err files which
951 have now been deleted. Also the error code call doesn't have to appear all
952 on one line (which resulted in some large lines...).
955 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
958 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
959 0 (which usually indicates a closed connection), but continue reading.
962 *) Fix some race conditions.
965 *) Add support for CRL distribution points extension. Add Certificate
966 Policies and CRL distribution points documentation.
969 *) Move the autogenerated header file parts to crypto/opensslconf.h.
972 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
973 8 of keying material. Merlin has also confirmed interop with this fix
974 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
975 [Merlin Hughes <merlin@baltimore.ie>]
977 *) Fix lots of warnings.
978 [Richard Levitte <levitte@stacken.kth.se>]
980 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
981 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
982 [Richard Levitte <levitte@stacken.kth.se>]
984 *) Fix problems with sizeof(long) == 8.
985 [Andy Polyakov <appro@fy.chalmers.se>]
987 *) Change functions to ANSI C.
990 *) Fix typos in error codes.
991 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
993 *) Remove defunct assembler files from Configure.
996 *) SPARC v8 assembler BIGNUM implementation.
997 [Andy Polyakov <appro@fy.chalmers.se>]
999 *) Support for Certificate Policies extension: both print and set.
1000 Various additions to support the r2i method this uses.
1003 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
1004 return a const string when you are expecting an allocated buffer.
1007 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
1008 types DirectoryString and DisplayText.
1011 *) Add code to allow r2i extensions to access the configuration database,
1012 add an LHASH database driver and add several ctx helper functions.
1015 *) Fix an evil bug in bn_expand2() which caused various BN functions to
1016 fail when they extended the size of a BIGNUM.
1019 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
1020 support typesafe stack.
1023 *) Fix typo in SSL_[gs]et_options().
1024 [Nils Frostberg <nils@medcom.se>]
1026 *) Delete various functions and files that belonged to the (now obsolete)
1027 old X509V3 handling code.
1030 *) New Configure option "rsaref".
1033 *) Don't auto-generate pem.h.
1036 *) Introduce type-safe ASN.1 SETs.
1039 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
1040 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
1042 *) Introduce type-safe STACKs. This will almost certainly break lots of code
1043 that links with OpenSSL (well at least cause lots of warnings), but fear
1044 not: the conversion is trivial, and it eliminates loads of evil casts. A
1045 few STACKed things have been converted already. Feel free to convert more.
1046 In the fullness of time, I'll do away with the STACK type altogether.
1049 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
1050 specified in <certfile> by updating the entry in the index.txt file.
1051 This way one no longer has to edit the index.txt file manually for
1052 revoking a certificate. The -revoke option does the gory details now.
1053 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
1055 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
1056 `-text' option at all and this way the `-noout -text' combination was
1057 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
1058 [Ralf S. Engelschall]
1060 *) Make sure a corresponding plain text error message exists for the
1061 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
1062 verify callback function determined that a certificate was revoked.
1063 [Ralf S. Engelschall]
1065 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
1066 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
1067 all available cipers including rc5, which was forgotten until now.
1068 In order to let the testing shell script know which algorithms
1069 are available, a new (up to now undocumented) command
1070 "openssl list-cipher-commands" is used.
1073 *) Bugfix: s_client occasionally would sleep in select() when
1074 it should have checked SSL_pending() first.
1077 *) New functions DSA_do_sign and DSA_do_verify to provide access to
1078 the raw DSA values prior to ASN.1 encoding.
1081 *) Tweaks to Configure
1082 [Niels Poppe <niels@netbox.org>]
1084 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
1088 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
1091 *) New config option to avoid instructions that are illegal on the 80386.
1092 The default code is faster, but requires at least a 486.
1095 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
1096 SSL2_SERVER_VERSION (not used at all) macros, which are now the
1097 same as SSL2_VERSION anyway.
1100 *) New "-showcerts" option for s_client.
1103 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
1104 application. Various cleanups and fixes.
1107 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
1108 modify error routines to work internally. Add error codes and PBE init
1109 to library startup routines.
1112 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
1113 packing functions to asn1 and evp. Changed function names and error
1114 codes along the way.
1117 *) PKCS12 integration: and so it begins... First of several patches to
1118 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
1119 objects to objects.h
1122 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
1123 and display support for Thawte strong extranet extension.
1126 *) Add LinuxPPC support.
1127 [Jeff Dubrule <igor@pobox.org>]
1129 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
1130 bn_div_words in alpha.s.
1131 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
1133 *) Make sure the RSA OAEP test is skipped under -DRSAref because
1134 OAEP isn't supported when OpenSSL is built with RSAref.
1135 [Ulf Moeller <ulf@fitug.de>]
1137 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
1138 so they no longer are missing under -DNOPROTO.
1139 [Soren S. Jorvang <soren@t.dk>]
1142 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
1144 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
1145 doesn't work when the session is reused. Coming soon!
1148 *) Fix a security hole, that allows sessions to be reused in the wrong
1149 context thus bypassing client cert protection! All software that uses
1150 client certs and session caches in multiple contexts NEEDS PATCHING to
1151 allow session reuse! A fuller solution is in the works.
1152 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
1154 *) Some more source tree cleanups (removed obsolete files
1155 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
1156 permission on "config" script to be executable) and a fix for the INSTALL
1158 [Ulf Moeller <ulf@fitug.de>]
1160 *) Remove some legacy and erroneous uses of malloc, free instead of
1162 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
1164 *) Make rsa_oaep_test return non-zero on error.
1165 [Ulf Moeller <ulf@fitug.de>]
1167 *) Add support for native Solaris shared libraries. Configure
1168 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
1169 if someone would make that last step automatic.
1170 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
1172 *) ctx_size was not built with the right compiler during "make links". Fixed.
1175 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
1176 except NULL ciphers". This means the default cipher list will no longer
1177 enable NULL ciphers. They need to be specifically enabled e.g. with
1178 the string "DEFAULT:eNULL".
1181 *) Fix to RSA private encryption routines: if p < q then it would
1182 occasionally produce an invalid result. This will only happen with
1183 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
1186 *) Be less restrictive and allow also `perl util/perlpath.pl
1187 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
1188 because this way one can also use an interpreter named `perl5' (which is
1189 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
1190 installed as `perl').
1191 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
1193 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
1194 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
1196 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
1197 advapi32.lib to Win32 build and change the pem test comparision
1198 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
1199 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
1200 and crypto/des/ede_cbcm_enc.c.
1203 *) DES quad checksum was broken on big-endian architectures. Fixed.
1206 *) Comment out two functions in bio.h that aren't implemented. Fix up the
1207 Win32 test batch file so it (might) work again. The Win32 test batch file
1208 is horrible: I feel ill....
1211 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
1212 in e_os.h. Audit of header files to check ANSI and non ANSI
1213 sections: 10 functions were absent from non ANSI section and not exported
1214 from Windows DLLs. Fixed up libeay.num for new functions.
1217 *) Make `openssl version' output lines consistent.
1218 [Ralf S. Engelschall]
1220 *) Fix Win32 symbol export lists for BIO functions: Added
1221 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
1222 to ms/libeay{16,32}.def.
1223 [Ralf S. Engelschall]
1225 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
1226 fine under Unix and passes some trivial tests I've now added. But the
1227 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
1228 added to make sure no one expects that this stuff really works in the
1229 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
1230 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
1232 [Ralf S. Engelschall]
1234 *) Fix the generation of two part addresses in perl.
1235 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
1237 *) Add config entry for Linux on MIPS.
1238 [John Tobey <jtobey@channel1.com>]
1240 *) Make links whenever Configure is run, unless we are on Windoze.
1243 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
1244 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
1248 *) Add a useful kludge to allow package maintainers to specify compiler and
1249 other platforms details on the command line without having to patch the
1250 Configure script everytime: One now can use ``perl Configure
1251 <id>:<details>'', i.e. platform ids are allowed to have details appended
1252 to them (seperated by colons). This is treated as there would be a static
1253 pre-configured entry in Configure's %table under key <id> with value
1254 <details> and ``perl Configure <id>'' is called. So, when you want to
1255 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
1256 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
1257 now, which overrides the FreeBSD-elf entry on-the-fly.
1258 [Ralf S. Engelschall]
1260 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
1263 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
1264 on the `perl Configure ...' command line. This way one can compile
1265 OpenSSL libraries with Position Independent Code (PIC) which is needed
1266 for linking it into DSOs.
1267 [Ralf S. Engelschall]
1269 *) Remarkably, export ciphers were totally broken and no-one had noticed!
1273 *) Cleaned up the LICENSE document: The official contact for any license
1274 questions now is the OpenSSL core team under openssl-core@openssl.org.
1275 And add a paragraph about the dual-license situation to make sure people
1276 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
1277 to the OpenSSL toolkit.
1278 [Ralf S. Engelschall]
1280 *) General source tree makefile cleanups: Made `making xxx in yyy...'
1281 display consistent in the source tree and replaced `/bin/rm' by `rm'.
1282 Additonally cleaned up the `make links' target: Remove unnecessary
1283 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
1284 to speed processing and no longer clutter the display with confusing
1285 stuff. Instead only the actually done links are displayed.
1286 [Ralf S. Engelschall]
1288 *) Permit null encryption ciphersuites, used for authentication only. It used
1289 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
1290 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
1294 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
1295 signed attributes when verifying signatures (this would break them),
1296 the detached data encoding was wrong and public keys obtained using
1297 X509_get_pubkey() weren't freed.
1300 *) Add text documentation for the BUFFER functions. Also added a work around
1301 to a Win95 console bug. This was triggered by the password read stuff: the
1302 last character typed gets carried over to the next fread(). If you were
1303 generating a new cert request using 'req' for example then the last
1304 character of the passphrase would be CR which would then enter the first
1308 *) Added the new `Includes OpenSSL Cryptography Software' button as
1309 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
1310 button and can be used by applications based on OpenSSL to show the
1311 relationship to the OpenSSL project.
1312 [Ralf S. Engelschall]
1314 *) Remove confusing variables in function signatures in files
1315 ssl/ssl_lib.c and ssl/ssl.h.
1316 [Lennart Bong <lob@kulthea.stacken.kth.se>]
1318 *) Don't install bss_file.c under PREFIX/include/
1319 [Lennart Bong <lob@kulthea.stacken.kth.se>]
1321 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
1322 functions that return function pointers and has support for NT specific
1323 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
1324 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
1325 unsigned to signed types: this was killing the Win32 compile.
1328 *) Add new certificate file to stack functions,
1329 SSL_add_dir_cert_subjects_to_stack() and
1330 SSL_add_file_cert_subjects_to_stack(). These largely supplant
1331 SSL_load_client_CA_file(), and can be used to add multiple certs easily
1332 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
1333 This means that Apache-SSL and similar packages don't have to mess around
1334 to add as many CAs as they want to the preferred list.
1337 *) Experiment with doxygen documentation. Currently only partially applied to
1339 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
1340 openssl.doxy as the configuration file.
1343 *) Get rid of remaining C++-style comments which strict C compilers hate.
1344 [Ralf S. Engelschall, pointed out by Carlos Amengual]
1346 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
1347 compiled in by default: it has problems with large keys.
1350 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
1351 DH private keys and/or callback functions which directly correspond to
1352 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
1353 is needed for applications which have to configure certificates on a
1354 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
1356 For the RSA certificate situation is makes no difference, but
1357 for the DSA certificate situation this fixes the "no shared cipher"
1358 problem where the OpenSSL cipher selection procedure failed because the
1359 temporary keys were not overtaken from the context and the API provided
1360 no way to reconfigure them.
1361 The new functions now let applications reconfigure the stuff and they
1362 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
1363 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
1364 non-public-API function ssl_cert_instantiate() is used as a helper
1365 function and also to reduce code redundancy inside ssl_rsa.c.
1366 [Ralf S. Engelschall]
1368 *) Move s_server -dcert and -dkey options out of the undocumented feature
1369 area because they are useful for the DSA situation and should be
1370 recognized by the users.
1371 [Ralf S. Engelschall]
1373 *) Fix the cipher decision scheme for export ciphers: the export bits are
1374 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
1375 SSL_EXP_MASK. So, the original variable has to be used instead of the
1376 already masked variable.
1377 [Richard Levitte <levitte@stacken.kth.se>]
1379 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
1380 [Richard Levitte <levitte@stacken.kth.se>]
1382 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
1383 from `int' to `unsigned int' because it's a length and initialized by
1384 EVP_DigestFinal() which expects an `unsigned int *'.
1385 [Richard Levitte <levitte@stacken.kth.se>]
1387 *) Don't hard-code path to Perl interpreter on shebang line of Configure
1388 script. Instead use the usual Shell->Perl transition trick.
1389 [Ralf S. Engelschall]
1391 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
1392 (in addition to RSA certificates) to match the behaviour of `openssl dsa
1393 -noout -modulus' as it's already the case for `openssl rsa -noout
1394 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
1395 currently the public key is printed (a decision which was already done by
1396 `openssl dsa -modulus' in the past) which serves a similar purpose.
1397 Additionally the NO_RSA no longer completely removes the whole -modulus
1398 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
1400 [Ralf S. Engelschall]
1402 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
1403 BIO. See the source (crypto/evp/bio_ok.c) for more info.
1404 [Arne Ansper <arne@ats.cyber.ee>]
1406 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
1407 to be added. Now both 'req' and 'ca' can use new objects defined in the
1411 *) Add cool BIO that does syslog (or event log on NT).
1412 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
1414 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
1415 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
1416 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
1417 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
1420 *) Add preliminary config info for new extension code.
1423 *) Make RSA_NO_PADDING really use no padding.
1424 [Ulf Moeller <ulf@fitug.de>]
1426 *) Generate errors when private/public key check is done.
1429 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
1430 for some CRL extensions and new objects added.
1433 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
1434 key usage extension and fuller support for authority key id.
1437 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
1438 padding method for RSA, which is recommended for new applications in PKCS
1439 #1 v2.0 (RFC 2437, October 1998).
1440 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
1441 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
1442 against Bleichbacher's attack on RSA.
1443 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
1446 *) Updates to the new SSL compression code
1447 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
1449 *) Fix so that the version number in the master secret, when passed
1450 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
1451 (because the server will not accept higher), that the version number
1452 is 0x03,0x01, not 0x03,0x00
1453 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
1455 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
1456 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
1457 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
1460 *) Support for RAW extensions where an arbitrary extension can be
1461 created by including its DER encoding. See apps/openssl.cnf for
1465 *) Make sure latest Perl versions don't interpret some generated C array
1466 code as Perl array code in the crypto/err/err_genc.pl script.
1467 [Lars Weber <3weber@informatik.uni-hamburg.de>]
1469 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
1470 not many people have the assembler. Various Win32 compilation fixes and
1471 update to the INSTALL.W32 file with (hopefully) more accurate Win32
1475 *) Modify configure script 'Configure' to automatically create crypto/date.h
1476 file under Win32 and also build pem.h from pem.org. New script
1477 util/mkfiles.pl to create the MINFO file on environments that can't do a
1478 'make files': perl util/mkfiles.pl >MINFO should work.
1481 *) Major rework of DES function declarations, in the pursuit of correctness
1482 and purity. As a result, many evil casts evaporated, and some weirdness,
1483 too. You may find this causes warnings in your code. Zapping your evil
1484 casts will probably fix them. Mostly.
1487 *) Fix for a typo in asn1.h. Bug fix to object creation script
1488 obj_dat.pl. It considered a zero in an object definition to mean
1489 "end of object": none of the objects in objects.h have any zeros
1490 so it wasn't spotted.
1491 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
1493 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
1494 Masking (CBCM). In the absence of test vectors, the best I have been able
1495 to do is check that the decrypt undoes the encrypt, so far. Send me test
1496 vectors if you have them.
1499 *) Correct calculation of key length for export ciphers (too much space was
1500 allocated for null ciphers). This has not been tested!
1503 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
1504 message is now correct (it understands "crypto" and "ssl" on its
1505 command line). There is also now an "update" option. This will update
1506 the util/ssleay.num and util/libeay.num files with any new functions.
1508 perl util/mkdef.pl crypto ssl update
1509 it will update them.
1512 *) Overhauled the Perl interface (perl/*):
1513 - ported BN stuff to OpenSSL's different BN library
1514 - made the perl/ source tree CVS-aware
1515 - renamed the package from SSLeay to OpenSSL (the files still contain
1516 their history because I've copied them in the repository)
1517 - removed obsolete files (the test scripts will be replaced
1518 by better Test::Harness variants in the future)
1519 [Ralf S. Engelschall]
1521 *) First cut for a very conservative source tree cleanup:
1522 1. merge various obsolete readme texts into doc/ssleay.txt
1523 where we collect the old documents and readme texts.
1524 2. remove the first part of files where I'm already sure that we no
1525 longer need them because of three reasons: either they are just temporary
1526 files which were left by Eric or they are preserved original files where
1527 I've verified that the diff is also available in the CVS via "cvs diff
1528 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
1529 the crypto/md/ stuff).
1530 [Ralf S. Engelschall]
1532 *) More extension code. Incomplete support for subject and issuer alt
1533 name, issuer and authority key id. Change the i2v function parameters
1534 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
1535 what that's for :-) Fix to ASN1 macro which messed up
1536 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
1539 *) Preliminary support for ENUMERATED type. This is largely copied from the
1543 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
1544 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
1546 *) Make sure `make rehash' target really finds the `openssl' program.
1547 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
1549 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
1550 like to hear about it if this slows down other processors.
1553 *) Add CygWin32 platform information to Configure script.
1554 [Alan Batie <batie@aahz.jf.intel.com>]
1556 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
1557 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
1559 *) New program nseq to manipulate netscape certificate sequences
1562 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
1566 *) Fixes to BN code. Previously the default was to define BN_RECURSION
1567 but the BN code had some problems that would cause failures when
1568 doing certificate verification and some other functions.
1569 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
1571 *) Add ASN1 and PEM code to support netscape certificate sequences.
1574 *) Add ASN1 and PEM code to support netscape certificate sequences.
1577 *) Add several PKIX and private extended key usage OIDs.
1580 *) Modify the 'ca' program to handle the new extension code. Modify
1581 openssl.cnf for new extension format, add comments.
1584 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
1585 and add a sample to openssl.cnf so req -x509 now adds appropriate
1589 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
1590 error code, add initial support to X509_print() and x509 application.
1593 *) Takes a deep breath and start addding X509 V3 extension support code. Add
1594 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
1595 stuff is currently isolated and isn't even compiled yet.
1598 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
1599 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
1600 Removed the versions check from X509 routines when loading extensions:
1601 this allows certain broken certificates that don't set the version
1602 properly to be processed.
1605 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
1606 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
1607 can still be regenerated with "make depend".
1610 *) Spelling mistake in C version of CAST-128.
1611 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
1613 *) Changes to the error generation code. The perl script err-code.pl
1614 now reads in the old error codes and retains the old numbers, only
1615 adding new ones if necessary. It also only changes the .err files if new
1616 codes are added. The makefiles have been modified to only insert errors
1617 when needed (to avoid needlessly modifying header files). This is done
1618 by only inserting errors if the .err file is newer than the auto generated
1619 C file. To rebuild all the error codes from scratch (the old behaviour)
1620 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
1621 or delete all the .err files.
1624 *) CAST-128 was incorrectly implemented for short keys. The C version has
1625 been fixed, but is untested. The assembler versions are also fixed, but
1626 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
1627 to regenerate it if needed.
1628 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
1629 Hagino <itojun@kame.net>]
1631 *) File was opened incorrectly in randfile.c.
1632 [Ulf Möller <ulf@fitug.de>]
1634 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
1635 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
1636 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
1637 al: it's just almost always a UTCTime. Note this patch adds new error
1638 codes so do a "make errors" if there are problems.
1641 *) Correct Linux 1 recognition in config.
1642 [Ulf Möller <ulf@fitug.de>]
1644 *) Remove pointless MD5 hash when using DSA keys in ca.
1645 [Anonymous <nobody@replay.com>]
1647 *) Generate an error if given an empty string as a cert directory. Also
1648 generate an error if handed NULL (previously returned 0 to indicate an
1649 error, but didn't set one).
1650 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
1652 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
1655 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
1656 parameters. This was causing a warning which killed off the Win32 compile.
1659 *) Remove C++ style comments from crypto/bn/bn_local.h.
1660 [Neil Costigan <neil.costigan@celocom.com>]
1662 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
1663 based on a text string, looking up short and long names and finally
1664 "dot" format. The "dot" format stuff didn't work. Added new function
1665 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
1666 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
1667 OID is not part of the table.
1670 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
1671 X509_LOOKUP_by_alias().
1674 *) Sort openssl functions by name.
1677 *) Get the gendsa program working (hopefully) and add it to app list. Remove
1678 encryption from sample DSA keys (in case anyone is interested the password
1682 *) Make _all_ *_free functions accept a NULL pointer.
1683 [Frans Heymans <fheymans@isaserver.be>]
1685 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
1687 [Anonymous <nobody@replay.com>]
1689 *) s_server should send the CAfile as acceptable CAs, not its own cert.
1690 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
1692 *) Don't blow it for numeric -newkey arguments to apps/req.
1693 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
1695 *) Temp key "for export" tests were wrong in s3_srvr.c.
1696 [Anonymous <nobody@replay.com>]
1698 *) Add prototype for temp key callback functions
1699 SSL_CTX_set_tmp_{rsa,dh}_callback().
1702 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
1703 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
1706 *) X509_name_add_entry() freed the wrong thing after an error.
1707 [Arne Ansper <arne@ats.cyber.ee>]
1709 *) rsa_eay.c would attempt to free a NULL context.
1710 [Arne Ansper <arne@ats.cyber.ee>]
1712 *) BIO_s_socket() had a broken should_retry() on Windoze.
1713 [Arne Ansper <arne@ats.cyber.ee>]
1715 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
1716 [Arne Ansper <arne@ats.cyber.ee>]
1718 *) Make sure the already existing X509_STORE->depth variable is initialized
1719 in X509_STORE_new(), but document the fact that this variable is still
1720 unused in the certificate verification process.
1721 [Ralf S. Engelschall]
1723 *) Fix the various library and apps files to free up pkeys obtained from
1724 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
1727 *) Fix reference counting in X509_PUBKEY_get(). This makes
1728 demos/maurice/example2.c work, amongst others, probably.
1729 [Steve Henson and Ben Laurie]
1731 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
1732 `openssl' and second, the shortcut symlinks for the `openssl <command>'
1733 are no longer created. This way we have a single and consistent command
1734 line interface `openssl <command>', similar to `cvs <command>'.
1735 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
1737 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
1738 BIT STRING wrapper always have zero unused bits.
1741 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
1744 *) Make the top-level INSTALL documentation easier to understand.
1747 *) Makefiles updated to exit if an error occurs in a sub-directory
1748 make (including if user presses ^C) [Paul Sutton]
1750 *) Make Montgomery context stuff explicit in RSA data structure.
1753 *) Fix build order of pem and err to allow for generated pem.h.
1756 *) Fix renumbering bug in X509_NAME_delete_entry().
1759 *) Enhanced the err-ins.pl script so it makes the error library number
1760 global and can add a library name. This is needed for external ASN1 and
1761 other error libraries.
1764 *) Fixed sk_insert which never worked properly.
1767 *) Fix ASN1 macros so they can handle indefinite length construted
1768 EXPLICIT tags. Some non standard certificates use these: they can now
1772 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
1773 into a single doc/ssleay.txt bundle. This way the information is still
1774 preserved but no longer messes up this directory. Now it's new room for
1775 the new set of documenation files.
1776 [Ralf S. Engelschall]
1778 *) SETs were incorrectly DER encoded. This was a major pain, because they
1779 shared code with SEQUENCEs, which aren't coded the same. This means that
1780 almost everything to do with SETs or SEQUENCEs has either changed name or
1781 number of arguments.
1782 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
1784 *) Fix test data to work with the above.
1787 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
1788 was already fixed by Eric for 0.9.1 it seems.
1789 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
1791 *) Autodetect FreeBSD3.
1794 *) Fix various bugs in Configure. This affects the following platforms:
1798 unixware-2.0-pentium
1802 *) Eliminate generated files from CVS. Reorder tests to regenerate files
1803 before they are needed.
1806 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
1810 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
1812 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
1813 changed SSLeay to OpenSSL in version strings.
1814 [Ralf S. Engelschall]
1816 *) Some fixups to the top-level documents.
1819 *) Fixed the nasty bug where rsaref.h was not found under compile-time
1820 because the symlink to include/ was missing.
1821 [Ralf S. Engelschall]
1823 *) Incorporated the popular no-RSA/DSA-only patches
1824 which allow to compile a RSA-free SSLeay.
1825 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
1827 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
1828 when "ssleay" is still not found.
1829 [Ralf S. Engelschall]
1831 *) Added more platforms to Configure: Cray T3E, HPUX 11,
1832 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
1834 *) Updated the README file.
1835 [Ralf S. Engelschall]
1837 *) Added various .cvsignore files in the CVS repository subdirs
1838 to make a "cvs update" really silent.
1839 [Ralf S. Engelschall]
1841 *) Recompiled the error-definition header files and added
1842 missing symbols to the Win32 linker tables.
1843 [Ralf S. Engelschall]
1845 *) Cleaned up the top-level documents;
1846 o new files: CHANGES and LICENSE
1847 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
1848 o merged COPYRIGHT into LICENSE
1849 o removed obsolete TODO file
1850 o renamed MICROSOFT to INSTALL.W32
1851 [Ralf S. Engelschall]
1853 *) Removed dummy files from the 0.9.1b source tree:
1854 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
1855 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
1856 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
1857 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
1858 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
1859 [Ralf S. Engelschall]
1861 *) Added various platform portability fixes.
1864 *) The Genesis of the OpenSSL rpject:
1865 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
1866 Young and Tim J. Hudson created while they were working for C2Net until
1868 [The OpenSSL Project]
1871 Changes between 0.9.0b and 0.9.1b [not released]
1873 *) Updated a few CA certificates under certs/
1876 *) Changed some BIGNUM api stuff.
1879 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
1880 DGUX x86, Linux Alpha, etc.
1883 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
1884 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
1888 *) Add -strparse option to asn1pars program which parses nested
1890 [Dr Stephen Henson <shenson@bigfoot.com>]
1892 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
1895 *) DSA fix for "ca" program.
1898 *) Added "-genkey" option to "dsaparam" program.
1901 *) Added RIPE MD160 (rmd160) message digest.
1904 *) Added -a (all) option to "ssleay version" command.
1907 *) Added PLATFORM define which is the id given to Configure.
1910 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
1913 *) Extended the ASN.1 parser routines.
1916 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
1919 *) Added a BN_CTX to the BN library.
1922 *) Fixed the weak key values in DES library
1925 *) Changed API in EVP library for cipher aliases.
1928 *) Added support for RC2/64bit cipher.
1931 *) Converted the lhash library to the crypto/mem.c functions.
1934 *) Added more recognized ASN.1 object ids.
1937 *) Added more RSA padding checks for SSL/TLS.
1940 *) Added BIO proxy/filter functionality.
1943 *) Added extra_certs to SSL_CTX which can be used
1944 send extra CA certificates to the client in the CA cert chain sending
1945 process. It can be configured with SSL_CTX_add_extra_chain_cert().
1948 *) Now Fortezza is denied in the authentication phase because
1949 this is key exchange mechanism is not supported by SSLeay at all.
1952 *) Additional PKCS1 checks.
1955 *) Support the string "TLSv1" for all TLS v1 ciphers.
1958 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
1959 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
1962 *) Fixed a few memory leaks.
1965 *) Fixed various code and comment typos.
1968 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
1969 bytes sent in the client random.
1970 [Edward Bishop <ebishop@spyglass.com>]