5 Changes between 0.9.8b and 0.9.9 [xx XXX xxxx]
7 *) Various modifications and fixes to SSL/TLS cipher string
8 handling. For ECC, the code now distinguishes between fixed ECDH
9 with RSA certificates on the one hand and with ECDSA certificates
10 on the other hand, since these are separate ciphersuites. The
11 unused code for Fortezza ciphersuites has been removed.
13 For consistency with EDH, ephemeral ECDH is now called "EECDH"
14 (not "ECDHE"). For consistency with the code for DH
15 certificates, use of ECDH certificates is now considered ECDH
16 authentication, not RSA or ECDSA authentication (the latter is
17 merely the CA's signing algorithm and not actively used in the
20 The temporary ciphersuite alias "ECCdraft" is no longer
21 available, and ECC ciphersuites are no longer excluded from "ALL"
22 and "DEFAULT". The following aliases now exist for RFC 4492
23 ciphersuites, most of these by analogy with the DH case:
25 kECDHr - ECDH cert, signed with RSA
26 kECDHe - ECDH cert, signed with ECDSA
27 kECDH - ECDH cert (signed with either RSA or ECDSA)
28 kEECDH - ephemeral ECDH
29 ECDH - ECDH cert or ephemeral ECDH
35 AECDH - anonymous ECDH
36 EECDH - non-anonymous ephemeral ECDH (equivalent to "kEECDH:-AECDH")
40 *) Add additional S/MIME capabilities for AES and GOST ciphers if supported.
41 Use correct micalg parameters depending on digest(s) in signed message.
44 *) Add engine support for EVP_PKEY_ASN1_METHOD. Add functions to process
45 an ENGINE asn1 method. Support ENGINE lookups in the ASN1 code.
48 *) Initial engine support for EVP_PKEY_METHOD. New functions to permit
49 an engine to register a method. Add ENGINE lookups for methods and
50 functional reference processing.
53 *) New functions EVP_Digest{Sign,Verify)*. These are enchance versions of
54 EVP_{Sign,Verify}* which allow an application to customise the signature
58 *) New -resign option to smime utility. This adds one or more signers
59 to an existing PKCS#7 signedData structure. Also -md option to use an
60 alternative message digest algorithm for signing.
63 *) Tidy up PKCS#7 routines and add new functions to make it easier to
64 create PKCS7 structures containing multiple signers. Update smime
65 application to support multiple signers.
68 *) New -macalg option to pkcs12 utility to allow setting of an alternative
72 *) Initial support for PKCS#5 v2.0 PRFs other than default SHA1 HMAC.
73 Reorganize PBE internals to lookup from a static table using NIDs,
74 add support for HMAC PBE OID translation. Add a EVP_CIPHER ctrl:
75 EVP_CTRL_PBE_PRF_NID this allows a cipher to specify an alternative
76 PRF which will be automatically used with PBES2.
79 *) Replace the algorithm specific calls to generate keys in "req" with the
83 *) Update PKCS#7 enveloped data routines to use new API. This is now
84 supported by any public key method supporting the encrypt operation. A
85 ctrl is added to allow the public key algorithm to examine or modify
86 the PKCS#7 RecipientInfo structure if it needs to: for RSA this is
90 *) Add a ctrl to asn1 method to allow a public key algorithm to express
91 a default digest type to use. In most cases this will be SHA1 but some
92 algorithms (such as GOST) need to specify an alternative digest. The
93 return value indicates how strong the prefernce is 1 means optional and
94 2 is mandatory (that is it is the only supported type). Modify
95 ASN1_item_sign() to accept a NULL digest argument to indicate it should
96 use the default md. Update openssl utilities to use the default digest
97 type for signing if it is not explicitly indicated.
100 *) Use OID cross reference table in ASN1_sign() and ASN1_verify(). New
101 EVP_MD flag EVP_MD_FLAG_PKEY_METHOD_SIGNATURE. This uses the relevant
102 signing method from the key type. This effectively removes the link
103 between digests and public key types.
106 *) Add an OID cross reference table and utility functions. Its purpose is to
107 translate between signature OIDs such as SHA1WithrsaEncryption and SHA1,
108 rsaEncryption. This will allow some of the algorithm specific hackery
109 needed to use the correct OID to be removed.
112 *) Remove algorithm specific dependencies when setting PKCS7_SIGNER_INFO
113 structures for PKCS7_sign(). They are now set up by the relevant public
117 *) Add provisional EC pkey method with support for ECDSA and ECDH.
120 *) Add support for key derivation (agreement) in the API, DH method and
124 *) Add DSA pkey method and DH pkey methods, extend DH ASN1 method to support
125 public and private key formats. As a side effect these add additional
126 command line functionality not previously available: DSA signatures can be
127 generated and verified using pkeyutl and DH key support and generation in
132 [Oliver Tappe <zooey@hirschkaefer.de>]
134 *) New make target "install_html_docs" installs HTML renditions of the
136 [Oliver Tappe <zooey@hirschkaefer.de>]
138 *) New utility "genpkey" this is analagous to "genrsa" etc except it can
139 generate keys for any algorithm. Extend and update EVP_PKEY_METHOD to
140 support key and parameter generation and add initial key generation
141 functionality for RSA.
144 *) Add functions for main EVP_PKEY_method operations. The undocumented
145 functions EVP_PKEY_{encrypt,decrypt} have been renamed to
146 EVP_PKEY_{encrypt,decrypt}_old.
149 *) Initial definitions for EVP_PKEY_METHOD. This will be a high level public
150 key API, doesn't do much yet.
153 *) New function EVP_PKEY_asn1_get0_info() to retrieve information about
154 public key algorithms. New option to openssl utility:
155 "list-public-key-algorithms" to print out info.
158 *) Implement the Supported Elliptic Curves Extension for
159 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
162 *) Don't free up OIDs in OBJ_cleanup() if they are in use by EVP_MD or
163 EVP_CIPHER structures to avoid later problems in EVP_cleanup().
166 *) New utilities pkey and pkeyparam. These are similar to algorithm specific
167 utilities such as rsa, dsa, dsaparam etc except they process any key
171 *) Transfer public key printing routines to EVP_PKEY_ASN1_METHOD. New
172 functions EVP_PKEY_print_public(), EVP_PKEY_print_private(),
173 EVP_PKEY_print_param() to print public key data from an EVP_PKEY
177 *) Initial support for pluggable public key ASN1.
178 De-spaghettify the public key ASN1 handling. Move public and private
179 key ASN1 handling to a new EVP_PKEY_ASN1_METHOD structure. Relocate
180 algorithm specific handling to a single module within the relevant
181 algorithm directory. Add functions to allow (near) opaque processing
182 of public and private key structures.
185 *) Implement the Supported Point Formats Extension for
186 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
189 *) Add initial support for RFC 4279 PSK TLS ciphersuites. Add members
190 for the psk identity [hint] and the psk callback functions to the
191 SSL_SESSION, SSL and SSL_CTX structure.
194 PSK-RC4-SHA, PSK-3DES-EDE-CBC-SHA, PSK-AES128-CBC-SHA,
198 SSL_CTX_use_psk_identity_hint
199 SSL_get_psk_identity_hint
201 SSL_use_psk_identity_hint
203 [Mika Kousa and Pasi Eronen of Nokia Corporation]
205 *) Add RFC 3161 compliant time stamp request creation, response generation
206 and response verification functionality.
207 [Zoltán Glózik <zglozik@opentsa.org>, The OpenTSA Project]
209 *) Add initial support for TLS extensions, specifically for the server_name
210 extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
211 have new members for a host name. The SSL data structure has an
212 additional member SSL_CTX *initial_ctx so that new sessions can be
213 stored in that context to allow for session resumption, even after the
214 SSL has been switched to a new SSL_CTX in reaction to a client's
215 server_name extension.
217 New functions (subject to change):
220 SSL_get_servername_type()
223 New CTRL codes and macros (subject to change):
225 SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
226 - SSL_CTX_set_tlsext_servername_callback()
227 SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
228 - SSL_CTX_set_tlsext_servername_arg()
229 SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_hostname()
231 openssl s_client has a new '-servername ...' option.
233 openssl s_server has new options '-servername_host ...', '-cert2 ...',
234 '-key2 ...', '-servername_fatal' (subject to change). This allows
235 testing the HostName extension for a specific single host name ('-cert'
236 and '-key' remain fallbacks for handshakes without HostName
237 negotiation). If the unrecogninzed_name alert has to be sent, this by
238 default is a warning; it becomes fatal with the '-servername_fatal'
241 [Peter Sylvester, Remy Allais, Christophe Renou]
243 *) Whirlpool hash implementation is added.
246 *) BIGNUM code on 64-bit SPARCv9 targets is switched from bn(64,64) to
247 bn(64,32). Because of instruction set limitations it doesn't have
248 any negative impact on performance. This was done mostly in order
249 to make it possible to share assembler modules, such as bn_mul_mont
250 implementations, between 32- and 64-bit builds without hassle.
253 *) Move code previously exiled into file crypto/ec/ec2_smpt.c
254 to ec2_smpl.c, and no longer require the OPENSSL_EC_BIN_PT_COMP
258 *) New candidate for BIGNUM assembler implementation, bn_mul_mont,
259 dedicated Montgomery multiplication procedure, is introduced.
260 BN_MONT_CTX is modified to allow bn_mul_mont to reach for higher
261 "64-bit" performance on certain 32-bit targets.
264 *) New option SSL_OP_NO_COMP to disable use of compression selectively
265 in SSL structures. New SSL ctrl to set maximum send fragment size.
266 Save memory by seeting the I/O buffer sizes dynamically instead of
267 using the maximum available value.
270 *) New option -V for 'openssl ciphers'. This prints the ciphersuite code
271 in addition to the text details.
274 *) Very, very preliminary EXPERIMENTAL support for printing of general
275 ASN1 structures. This currently produces rather ugly output and doesn't
276 handle several customised structures at all.
279 *) Integrated support for PVK file format and some related formats such
280 as MS PUBLICKEYBLOB and PRIVATEKEYBLOB. Command line switches to support
281 these in the 'rsa' and 'dsa' utilities.
284 *) Support for PKCS#1 RSAPublicKey format on rsa utility command line.
287 *) Remove the ancient ASN1_METHOD code. This was only ever used in one
288 place for the (very old) "NETSCAPE" format certificates which are now
289 handled using new ASN1 code equivalents.
292 *) Let the TLSv1_method() etc. functions return a 'const' SSL_METHOD
293 pointer and make the SSL_METHOD parameter in SSL_CTX_new,
294 SSL_CTX_set_ssl_version and SSL_set_ssl_method 'const'.
297 *) Modify CRL distribution points extension code to print out previously
298 unsupported fields. Enhance extension setting code to allow setting of
302 *) Add print and set support for Issuing Distribution Point CRL extension.
305 *) Change 'Configure' script to enable Camellia by default.
308 Changes between 0.9.8b and 0.9.8c [xx XXX xxxx]
310 *) Disable rogue ciphersuites:
312 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
313 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
314 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
316 The latter two were purportedly from
317 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
320 Also deactive the remaining ciphersuites from
321 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
322 unofficial, and the ID has long expired.
325 *) Fix RSA blinding Heisenbug (problems sometimes occured on
326 dual-core machines) and other potential thread-safety issues.
329 *) Add the symmetric cipher Camellia (128-bit, 192-bit, 256-bit key
330 versions), which is now available for royalty-free use
331 (see http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html).
332 Also, add Camellia TLS ciphersuites from RFC 4132.
334 To minimize changes between patchlevels in the OpenSSL 0.9.8
335 series, Camellia remains excluded from compilation unless OpenSSL
336 is configured with 'enable-camellia'.
339 *) Disable the padding bug check when compression is in use. The padding
340 bug check assumes the first packet is of even length, this is not
341 necessarily true if compresssion is enabled and can result in false
342 positives causing handshake failure. The actual bug test is ancient
343 code so it is hoped that implementations will either have fixed it by
344 now or any which still have the bug do not support compression.
347 Changes between 0.9.8a and 0.9.8b [04 May 2006]
349 *) When applying a cipher rule check to see if string match is an explicit
350 cipher suite and only match that one cipher suite if it is.
353 *) Link in manifests for VC++ if needed.
354 [Austin Ziegler <halostatue@gmail.com>]
356 *) Update support for ECC-based TLS ciphersuites according to
357 draft-ietf-tls-ecc-12.txt with proposed changes (but without
358 TLS extensions, which are supported starting with the 0.9.9
359 branch, not in the OpenSSL 0.9.8 branch).
362 *) New functions EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free() to support
363 opaque EVP_CIPHER_CTX handling.
366 *) Fixes and enhancements to zlib compression code. We now only use
367 "zlib1.dll" and use the default __cdecl calling convention on Win32
368 to conform with the standards mentioned here:
369 http://www.zlib.net/DLL_FAQ.txt
370 Static zlib linking now works on Windows and the new --with-zlib-include
371 --with-zlib-lib options to Configure can be used to supply the location
372 of the headers and library. Gracefully handle case where zlib library
376 *) Several fixes and enhancements to the OID generation code. The old code
377 sometimes allowed invalid OIDs (1.X for X >= 40 for example), couldn't
378 handle numbers larger than ULONG_MAX, truncated printing and had a
379 non standard OBJ_obj2txt() behaviour.
382 *) Add support for building of engines under engine/ as shared libraries
383 under VC++ build system.
386 *) Corrected the numerous bugs in the Win32 path splitter in DSO.
387 Hopefully, we will not see any false combination of paths any more.
390 Changes between 0.9.8 and 0.9.8a [11 Oct 2005]
392 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
393 (part of SSL_OP_ALL). This option used to disable the
394 countermeasure against man-in-the-middle protocol-version
395 rollback in the SSL 2.0 server implementation, which is a bad
396 idea. (CVE-2005-2969)
398 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
399 for Information Security, National Institute of Advanced Industrial
400 Science and Technology [AIST], Japan)]
402 *) Add two function to clear and return the verify parameter flags.
405 *) Keep cipherlists sorted in the source instead of sorting them at
406 runtime, thus removing the need for a lock.
409 *) Avoid some small subgroup attacks in Diffie-Hellman.
410 [Nick Mathewson and Ben Laurie]
412 *) Add functions for well-known primes.
415 *) Extended Windows CE support.
416 [Satoshi Nakamura and Andy Polyakov]
418 *) Initialize SSL_METHOD structures at compile time instead of during
419 runtime, thus removing the need for a lock.
422 *) Make PKCS7_decrypt() work even if no certificate is supplied by
423 attempting to decrypt each encrypted key in turn. Add support to
427 Changes between 0.9.7h and 0.9.8 [05 Jul 2005]
429 [NB: OpenSSL 0.9.7i and later 0.9.7 patch levels were released after
432 *) Add libcrypto.pc and libssl.pc for those who feel they need them.
435 *) Change CA.sh and CA.pl so they don't bundle the CSR and the private
436 key into the same file any more.
439 *) Add initial support for Win64, both IA64 and AMD64/x64 flavors.
442 *) Add -utf8 command line and config file option to 'ca'.
443 [Stefan <stf@udoma.org]
445 *) Removed the macro des_crypt(), as it seems to conflict with some
446 libraries. Use DES_crypt().
449 *) Correct naming of the 'chil' and '4758cca' ENGINEs. This
450 involves renaming the source and generated shared-libs for
451 both. The engines will accept the corrected or legacy ids
452 ('ncipher' and '4758_cca' respectively) when binding. NB,
453 this only applies when building 'shared'.
454 [Corinna Vinschen <vinschen@redhat.com> and Geoff Thorpe]
456 *) Add attribute functions to EVP_PKEY structure. Modify
457 PKCS12_create() to recognize a CSP name attribute and
458 use it. Make -CSP option work again in pkcs12 utility.
461 *) Add new functionality to the bn blinding code:
462 - automatic re-creation of the BN_BLINDING parameters after
463 a fixed number of uses (currently 32)
464 - add new function for parameter creation
465 - introduce flags to control the update behaviour of the
466 BN_BLINDING parameters
467 - hide BN_BLINDING structure
468 Add a second BN_BLINDING slot to the RSA structure to improve
469 performance when a single RSA object is shared among several
473 *) Add support for DTLS.
474 [Nagendra Modadugu <nagendra@cs.stanford.edu> and Ben Laurie]
476 *) Add support for DER encoded private keys (SSL_FILETYPE_ASN1)
477 to SSL_CTX_use_PrivateKey_file() and SSL_use_PrivateKey_file()
480 *) Remove buggy and incompletet DH cert support from
481 ssl/ssl_rsa.c and ssl/s3_both.c
484 *) Use SHA-1 instead of MD5 as the default digest algorithm for
485 the apps/openssl applications.
488 *) Compile clean with "-Wall -Wmissing-prototypes
489 -Wstrict-prototypes -Wmissing-declarations -Werror". Currently
490 DEBUG_SAFESTACK must also be set.
493 *) Change ./Configure so that certain algorithms can be disabled by default.
494 The new counterpiece to "no-xxx" is "enable-xxx".
496 The patented RC5 and MDC2 algorithms will now be disabled unless
497 "enable-rc5" and "enable-mdc2", respectively, are specified.
499 (IDEA remains enabled despite being patented. This is because IDEA
500 is frequently required for interoperability, and there is no license
501 fee for non-commercial use. As before, "no-idea" can be used to
502 avoid this algorithm.)
506 *) Add processing of proxy certificates (see RFC 3820). This work was
507 sponsored by KTH (The Royal Institute of Technology in Stockholm) and
508 EGEE (Enabling Grids for E-science in Europe).
511 *) RC4 performance overhaul on modern architectures/implementations, such
512 as Intel P4, IA-64 and AMD64.
515 *) New utility extract-section.pl. This can be used specify an alternative
516 section number in a pod file instead of having to treat each file as
517 a separate case in Makefile. This can be done by adding two lines to the
520 =for comment openssl_section:XXX
522 The blank line is mandatory.
526 *) New arguments -certform, -keyform and -pass for s_client and s_server
527 to allow alternative format key and certificate files and passphrase
531 *) New structure X509_VERIFY_PARAM which combines current verify parameters,
532 update associated structures and add various utility functions.
534 Add new policy related verify parameters, include policy checking in
535 standard verify code. Enhance 'smime' application with extra parameters
536 to support policy checking and print out.
539 *) Add a new engine to support VIA PadLock ACE extensions in the VIA C3
540 Nehemiah processors. These extensions support AES encryption in hardware
541 as well as RNG (though RNG support is currently disabled).
542 [Michal Ludvig <michal@logix.cz>, with help from Andy Polyakov]
544 *) Deprecate BN_[get|set]_params() functions (they were ignored internally).
547 *) New FIPS 180-2 algorithms, SHA-224/-256/-384/-512 are implemented.
548 [Andy Polyakov and a number of other people]
550 *) Improved PowerPC platform support. Most notably BIGNUM assembler
551 implementation contributed by IBM.
552 [Suresh Chari, Peter Waltenberg, Andy Polyakov]
554 *) The new 'RSA_generate_key_ex' function now takes a BIGNUM for the public
555 exponent rather than 'unsigned long'. There is a corresponding change to
556 the new 'rsa_keygen' element of the RSA_METHOD structure.
557 [Jelte Jansen, Geoff Thorpe]
559 *) Functionality for creating the initial serial number file is now
560 moved from CA.pl to the 'ca' utility with a new option -create_serial.
562 (Before OpenSSL 0.9.7e, CA.pl used to initialize the serial
563 number file to 1, which is bound to cause problems. To avoid
564 the problems while respecting compatibility between different 0.9.7
565 patchlevels, 0.9.7e employed 'openssl x509 -next_serial' in
566 CA.pl for serial number initialization. With the new release 0.9.8,
567 we can fix the problem directly in the 'ca' utility.)
570 *) Reduced header interdepencies by declaring more opaque objects in
571 ossl_typ.h. As a consequence, including some headers (eg. engine.h) will
572 give fewer recursive includes, which could break lazy source code - so
573 this change is covered by the OPENSSL_NO_DEPRECATED symbol. As always,
574 developers should define this symbol when building and using openssl to
575 ensure they track the recommended behaviour, interfaces, [etc], but
576 backwards-compatible behaviour prevails when this isn't defined.
579 *) New function X509_POLICY_NODE_print() which prints out policy nodes.
582 *) Add new EVP function EVP_CIPHER_CTX_rand_key and associated functionality.
583 This will generate a random key of the appropriate length based on the
584 cipher context. The EVP_CIPHER can provide its own random key generation
585 routine to support keys of a specific form. This is used in the des and
586 3des routines to generate a key of the correct parity. Update S/MIME
587 code to use new functions and hence generate correct parity DES keys.
588 Add EVP_CHECK_DES_KEY #define to return an error if the key is not
589 valid (weak or incorrect parity).
592 *) Add a local set of CRLs that can be used by X509_verify_cert() as well
593 as looking them up. This is useful when the verified structure may contain
594 CRLs, for example PKCS#7 signedData. Modify PKCS7_verify() to use any CRLs
595 present unless the new PKCS7_NO_CRL flag is asserted.
598 *) Extend ASN1 oid configuration module. It now additionally accepts the
601 shortName = some long name, 1.2.3.4
604 *) Reimplemented the BN_CTX implementation. There is now no more static
605 limitation on the number of variables it can handle nor the depth of the
606 "stack" handling for BN_CTX_start()/BN_CTX_end() pairs. The stack
607 information can now expand as required, and rather than having a single
608 static array of bignums, BN_CTX now uses a linked-list of such arrays
609 allowing it to expand on demand whilst maintaining the usefulness of
613 *) Add a missing BN_CTX parameter to the 'rsa_mod_exp' callback in RSA_METHOD
614 to allow all RSA operations to function using a single BN_CTX.
617 *) Preliminary support for certificate policy evaluation and checking. This
618 is initially intended to pass the tests outlined in "Conformance Testing
619 of Relying Party Client Certificate Path Processing Logic" v1.07.
622 *) bn_dup_expand() has been deprecated, it was introduced in 0.9.7 and
623 remained unused and not that useful. A variety of other little bignum
624 tweaks and fixes have also been made continuing on from the audit (see
628 *) Constify all or almost all d2i, c2i, s2i and r2i functions, along with
629 associated ASN1, EVP and SSL functions and old ASN1 macros.
632 *) BN_zero() only needs to set 'top' and 'neg' to zero for correct results,
633 and this should never fail. So the return value from the use of
634 BN_set_word() (which can fail due to needless expansion) is now deprecated;
635 if OPENSSL_NO_DEPRECATED is defined, BN_zero() is a void macro.
638 *) BN_CTX_get() should return zero-valued bignums, providing the same
639 initialised value as BN_new().
640 [Geoff Thorpe, suggested by Ulf Möller]
642 *) Support for inhibitAnyPolicy certificate extension.
645 *) An audit of the BIGNUM code is underway, for which debugging code is
646 enabled when BN_DEBUG is defined. This makes stricter enforcements on what
647 is considered valid when processing BIGNUMs, and causes execution to
648 assert() when a problem is discovered. If BN_DEBUG_RAND is defined,
649 further steps are taken to deliberately pollute unused data in BIGNUM
650 structures to try and expose faulty code further on. For now, openssl will
651 (in its default mode of operation) continue to tolerate the inconsistent
652 forms that it has tolerated in the past, but authors and packagers should
653 consider trying openssl and their own applications when compiled with
654 these debugging symbols defined. It will help highlight potential bugs in
655 their own code, and will improve the test coverage for OpenSSL itself. At
656 some point, these tighter rules will become openssl's default to improve
657 maintainability, though the assert()s and other overheads will remain only
658 in debugging configurations. See bn.h for more details.
659 [Geoff Thorpe, Nils Larsch, Ulf Möller]
661 *) BN_CTX_init() has been deprecated, as BN_CTX is an opaque structure
662 that can only be obtained through BN_CTX_new() (which implicitly
663 initialises it). The presence of this function only made it possible
664 to overwrite an existing structure (and cause memory leaks).
667 *) Because of the callback-based approach for implementing LHASH as a
668 template type, lh_insert() adds opaque objects to hash-tables and
669 lh_doall() or lh_doall_arg() are typically used with a destructor callback
670 to clean up those corresponding objects before destroying the hash table
671 (and losing the object pointers). So some over-zealous constifications in
672 LHASH have been relaxed so that lh_insert() does not take (nor store) the
673 objects as "const" and the lh_doall[_arg] callback wrappers are not
674 prototyped to have "const" restrictions on the object pointers they are
675 given (and so aren't required to cast them away any more).
678 *) The tmdiff.h API was so ugly and minimal that our own timing utility
679 (speed) prefers to use its own implementation. The two implementations
680 haven't been consolidated as yet (volunteers?) but the tmdiff API has had
681 its object type properly exposed (MS_TM) instead of casting to/from "char
682 *". This may still change yet if someone realises MS_TM and "ms_time_***"
683 aren't necessarily the greatest nomenclatures - but this is what was used
684 internally to the implementation so I've used that for now.
687 *) Ensure that deprecated functions do not get compiled when
688 OPENSSL_NO_DEPRECATED is defined. Some "openssl" subcommands and a few of
689 the self-tests were still using deprecated key-generation functions so
690 these have been updated also.
693 *) Reorganise PKCS#7 code to separate the digest location functionality
694 into PKCS7_find_digest(), digest addtion into PKCS7_bio_add_digest().
695 New function PKCS7_set_digest() to set the digest type for PKCS#7
696 digestedData type. Add additional code to correctly generate the
697 digestedData type and add support for this type in PKCS7 initialization
701 *) New function PKCS7_set0_type_other() this initializes a PKCS7
702 structure of type "other".
705 *) Fix prime generation loop in crypto/bn/bn_prime.pl by making
706 sure the loop does correctly stop and breaking ("division by zero")
707 modulus operations are not performed. The (pre-generated) prime
708 table crypto/bn/bn_prime.h was already correct, but it could not be
709 re-generated on some platforms because of the "division by zero"
710 situation in the script.
711 [Ralf S. Engelschall]
713 *) Update support for ECC-based TLS ciphersuites according to
714 draft-ietf-tls-ecc-03.txt: the KDF1 key derivation function with
715 SHA-1 now is only used for "small" curves (where the
716 representation of a field element takes up to 24 bytes); for
717 larger curves, the field element resulting from ECDH is directly
718 used as premaster secret.
719 [Douglas Stebila (Sun Microsystems Laboratories)]
721 *) Add code for kP+lQ timings to crypto/ec/ectest.c, and add SEC2
722 curve secp160r1 to the tests.
723 [Douglas Stebila (Sun Microsystems Laboratories)]
725 *) Add the possibility to load symbols globally with DSO.
726 [Götz Babin-Ebell <babin-ebell@trustcenter.de> via Richard Levitte]
728 *) Add the functions ERR_set_mark() and ERR_pop_to_mark() for better
729 control of the error stack.
732 *) Add support for STORE in ENGINE.
735 *) Add the STORE type. The intention is to provide a common interface
736 to certificate and key stores, be they simple file-based stores, or
737 HSM-type store, or LDAP stores, or...
738 NOTE: The code is currently UNTESTED and isn't really used anywhere.
741 *) Add a generic structure called OPENSSL_ITEM. This can be used to
742 pass a list of arguments to any function as well as provide a way
743 for a function to pass data back to the caller.
746 *) Add the functions BUF_strndup() and BUF_memdup(). BUF_strndup()
747 works like BUF_strdup() but can be used to duplicate a portion of
748 a string. The copy gets NUL-terminated. BUF_memdup() duplicates
752 *) Add the function sk_find_ex() which works like sk_find(), but will
753 return an index to an element even if an exact match couldn't be
754 found. The index is guaranteed to point at the element where the
755 searched-for key would be inserted to preserve sorting order.
758 *) Add the function OBJ_bsearch_ex() which works like OBJ_bsearch() but
759 takes an extra flags argument for optional functionality. Currently,
760 the following flags are defined:
762 OBJ_BSEARCH_VALUE_ON_NOMATCH
763 This one gets OBJ_bsearch_ex() to return a pointer to the first
764 element where the comparing function returns a negative or zero
767 OBJ_BSEARCH_FIRST_VALUE_ON_MATCH
768 This one gets OBJ_bsearch_ex() to return a pointer to the first
769 element where the comparing function returns zero. This is useful
770 if there are more than one element where the comparing function
774 *) Make it possible to create self-signed certificates with 'openssl ca'
775 in such a way that the self-signed certificate becomes part of the
776 CA database and uses the same mechanisms for serial number generation
777 as all other certificate signing. The new flag '-selfsign' enables
778 this functionality. Adapt CA.sh and CA.pl.in.
781 *) Add functionality to check the public key of a certificate request
782 against a given private. This is useful to check that a certificate
783 request can be signed by that key (self-signing).
786 *) Make it possible to have multiple active certificates with the same
787 subject in the CA index file. This is done only if the keyword
788 'unique_subject' is set to 'no' in the main CA section (default
789 if 'CA_default') of the configuration file. The value is saved
790 with the database itself in a separate index attribute file,
791 named like the index file with '.attr' appended to the name.
794 *) Generate muti valued AVAs using '+' notation in config files for
798 *) Support for nameConstraints certificate extension.
801 *) Support for policyConstraints certificate extension.
804 *) Support for policyMappings certificate extension.
807 *) Make sure the default DSA_METHOD implementation only uses its
808 dsa_mod_exp() and/or bn_mod_exp() handlers if they are non-NULL,
809 and change its own handlers to be NULL so as to remove unnecessary
810 indirection. This lets alternative implementations fallback to the
811 default implementation more easily.
814 *) Support for directoryName in GeneralName related extensions
818 *) Make it possible to link applications using Makefile.shared.
819 Make that possible even when linking against static libraries!
822 *) Support for single pass processing for S/MIME signing. This now
823 means that S/MIME signing can be done from a pipe, in addition
824 cleartext signing (multipart/signed type) is effectively streaming
825 and the signed data does not need to be all held in memory.
827 This is done with a new flag PKCS7_STREAM. When this flag is set
828 PKCS7_sign() only initializes the PKCS7 structure and the actual signing
829 is done after the data is output (and digests calculated) in
833 *) Add full support for -rpath/-R, both in shared libraries and
834 applications, at least on the platforms where it's known how
838 *) In crypto/ec/ec_mult.c, implement fast point multiplication with
839 precomputation, based on wNAF splitting: EC_GROUP_precompute_mult()
840 will now compute a table of multiples of the generator that
841 makes subsequent invocations of EC_POINTs_mul() or EC_POINT_mul()
842 faster (notably in the case of a single point multiplication,
844 [Nils Larsch, Bodo Moeller]
846 *) IPv6 support for certificate extensions. The various extensions
847 which use the IP:a.b.c.d can now take IPv6 addresses using the
848 formats of RFC1884 2.2 . IPv6 addresses are now also displayed
852 *) Added an ENGINE that implements RSA by performing private key
853 exponentiations with the GMP library. The conversions to and from
854 GMP's mpz_t format aren't optimised nor are any montgomery forms
855 cached, and on x86 it appears OpenSSL's own performance has caught up.
856 However there are likely to be other architectures where GMP could
857 provide a boost. This ENGINE is not built in by default, but it can be
858 specified at Configure time and should be accompanied by the necessary
859 linker additions, eg;
860 ./config -DOPENSSL_USE_GMP -lgmp
863 *) "openssl engine" will not display ENGINE/DSO load failure errors when
864 testing availability of engines with "-t" - the old behaviour is
865 produced by increasing the feature's verbosity with "-tt".
868 *) ECDSA routines: under certain error conditions uninitialized BN objects
869 could be freed. Solution: make sure initialization is performed early
870 enough. (Reported and fix supplied by Nils Larsch <nla@trustcenter.de>
874 *) Key-generation can now be implemented in RSA_METHOD, DSA_METHOD
875 and DH_METHOD (eg. by ENGINE implementations) to override the normal
876 software implementations. For DSA and DH, parameter generation can
877 also be overriden by providing the appropriate method callbacks.
880 *) Change the "progress" mechanism used in key-generation and
881 primality testing to functions that take a new BN_GENCB pointer in
882 place of callback/argument pairs. The new API functions have "_ex"
883 postfixes and the older functions are reimplemented as wrappers for
884 the new ones. The OPENSSL_NO_DEPRECATED symbol can be used to hide
885 declarations of the old functions to help (graceful) attempts to
886 migrate to the new functions. Also, the new key-generation API
887 functions operate on a caller-supplied key-structure and return
888 success/failure rather than returning a key or NULL - this is to
889 help make "keygen" another member function of RSA_METHOD etc.
891 Example for using the new callback interface:
893 int (*my_callback)(int a, int b, BN_GENCB *cb) = ...;
897 BN_GENCB_set(&my_cb, my_callback, my_arg);
899 return BN_is_prime_ex(some_bignum, BN_prime_checks, NULL, &cb);
900 /* For the meaning of a, b in calls to my_callback(), see the
901 * documentation of the function that calls the callback.
902 * cb will point to my_cb; my_arg can be retrieved as cb->arg.
903 * my_callback should return 1 if it wants BN_is_prime_ex()
904 * to continue, or 0 to stop.
909 *) Change the ZLIB compression method to be stateful, and make it
910 available to TLS with the number defined in
911 draft-ietf-tls-compression-04.txt.
914 *) Add the ASN.1 structures and functions for CertificatePair, which
915 is defined as follows (according to X.509_4thEditionDraftV6.pdf):
917 CertificatePair ::= SEQUENCE {
918 forward [0] Certificate OPTIONAL,
919 reverse [1] Certificate OPTIONAL,
920 -- at least one of the pair shall be present -- }
922 Also implement the PEM functions to read and write certificate
923 pairs, and defined the PEM tag as "CERTIFICATE PAIR".
925 This needed to be defined, mostly for the sake of the LDAP
926 attribute crossCertificatePair, but may prove useful elsewhere as
930 *) Make it possible to inhibit symlinking of shared libraries in
931 Makefile.shared, for Cygwin's sake.
934 *) Extend the BIGNUM API by creating a function
935 void BN_set_negative(BIGNUM *a, int neg);
936 and a macro that behave like
937 int BN_is_negative(const BIGNUM *a);
939 to avoid the need to access 'a->neg' directly in applications.
942 *) Implement fast modular reduction for pseudo-Mersenne primes
943 used in NIST curves (crypto/bn/bn_nist.c, crypto/ec/ecp_nist.c).
944 EC_GROUP_new_curve_GFp() will now automatically use this
946 [Nils Larsch <nla@trustcenter.de>]
948 *) Add new lock type (CRYPTO_LOCK_BN).
951 *) Change the ENGINE framework to automatically load engines
952 dynamically from specific directories unless they could be
953 found to already be built in or loaded. Move all the
954 current engines except for the cryptodev one to a new
956 The engines in engines/ are built as shared libraries if
957 the "shared" options was given to ./Configure or ./config.
958 Otherwise, they are inserted in libcrypto.a.
959 /usr/local/ssl/engines is the default directory for dynamic
960 engines, but that can be overriden at configure time through
961 the usual use of --prefix and/or --openssldir, and at run
962 time with the environment variable OPENSSL_ENGINES.
963 [Geoff Thorpe and Richard Levitte]
965 *) Add Makefile.shared, a helper makefile to build shared
966 libraries. Addapt Makefile.org.
969 *) Add version info to Win32 DLLs.
970 [Peter 'Luna' Runestig" <peter@runestig.com>]
972 *) Add new 'medium level' PKCS#12 API. Certificates and keys
973 can be added using this API to created arbitrary PKCS#12
974 files while avoiding the low level API.
976 New options to PKCS12_create(), key or cert can be NULL and
977 will then be omitted from the output file. The encryption
978 algorithm NIDs can be set to -1 for no encryption, the mac
979 iteration count can be set to 0 to omit the mac.
981 Enhance pkcs12 utility by making the -nokeys and -nocerts
982 options work when creating a PKCS#12 file. New option -nomac
983 to omit the mac, NONE can be set for an encryption algorithm.
984 New code is modified to use the enhanced PKCS12_create()
985 instead of the low level API.
988 *) Extend ASN1 encoder to support indefinite length constructed
989 encoding. This can output sequences tags and octet strings in
990 this form. Modify pk7_asn1.c to support indefinite length
991 encoding. This is experimental and needs additional code to
992 be useful, such as an ASN1 bio and some enhanced streaming
995 Extend template encode functionality so that tagging is passed
996 down to the template encoder.
999 *) Let 'openssl req' fail if an argument to '-newkey' is not
1000 recognized instead of using RSA as a default.
1003 *) Add support for ECC-based ciphersuites from draft-ietf-tls-ecc-01.txt.
1004 As these are not official, they are not included in "ALL";
1005 the "ECCdraft" ciphersuite group alias can be used to select them.
1006 [Vipul Gupta and Sumit Gupta (Sun Microsystems Laboratories)]
1008 *) Add ECDH engine support.
1009 [Nils Gura and Douglas Stebila (Sun Microsystems Laboratories)]
1011 *) Add ECDH in new directory crypto/ecdh/.
1012 [Douglas Stebila (Sun Microsystems Laboratories)]
1014 *) Let BN_rand_range() abort with an error after 100 iterations
1015 without success (which indicates a broken PRNG).
1018 *) Change BN_mod_sqrt() so that it verifies that the input value
1019 is really the square of the return value. (Previously,
1020 BN_mod_sqrt would show GIGO behaviour.)
1023 *) Add named elliptic curves over binary fields from X9.62, SECG,
1024 and WAP/WTLS; add OIDs that were still missing.
1026 [Sheueling Chang Shantz and Douglas Stebila
1027 (Sun Microsystems Laboratories)]
1029 *) Extend the EC library for elliptic curves over binary fields
1030 (new files ec2_smpl.c, ec2_smpt.c, ec2_mult.c in crypto/ec/).
1033 EC_GF2m_simple_method
1037 EC_GROUP_new_curve_GF2m
1038 EC_GROUP_set_curve_GF2m
1039 EC_GROUP_get_curve_GF2m
1040 EC_POINT_set_affine_coordinates_GF2m
1041 EC_POINT_get_affine_coordinates_GF2m
1042 EC_POINT_set_compressed_coordinates_GF2m
1044 Point compression for binary fields is disabled by default for
1045 patent reasons (compile with OPENSSL_EC_BIN_PT_COMP defined to
1048 As binary polynomials are represented as BIGNUMs, various members
1049 of the EC_GROUP and EC_POINT data structures can be shared
1050 between the implementations for prime fields and binary fields;
1051 the above ..._GF2m functions (except for EX_GROUP_new_curve_GF2m)
1052 are essentially identical to their ..._GFp counterparts.
1053 (For simplicity, the '..._GFp' prefix has been dropped from
1054 various internal method names.)
1056 An internal 'field_div' method (similar to 'field_mul' and
1057 'field_sqr') has been added; this is used only for binary fields.
1059 [Sheueling Chang Shantz and Douglas Stebila
1060 (Sun Microsystems Laboratories)]
1062 *) Optionally dispatch EC_POINT_mul(), EC_POINT_precompute_mult()
1063 through methods ('mul', 'precompute_mult').
1065 The generic implementations (now internally called 'ec_wNAF_mul'
1066 and 'ec_wNAF_precomputed_mult') remain the default if these
1067 methods are undefined.
1069 [Sheueling Chang Shantz and Douglas Stebila
1070 (Sun Microsystems Laboratories)]
1072 *) New function EC_GROUP_get_degree, which is defined through
1073 EC_METHOD. For curves over prime fields, this returns the bit
1074 length of the modulus.
1076 [Sheueling Chang Shantz and Douglas Stebila
1077 (Sun Microsystems Laboratories)]
1079 *) New functions EC_GROUP_dup, EC_POINT_dup.
1080 (These simply call ..._new and ..._copy).
1082 [Sheueling Chang Shantz and Douglas Stebila
1083 (Sun Microsystems Laboratories)]
1085 *) Add binary polynomial arithmetic software in crypto/bn/bn_gf2m.c.
1086 Polynomials are represented as BIGNUMs (where the sign bit is not
1087 used) in the following functions [macros]:
1090 BN_GF2m_sub [= BN_GF2m_add]
1091 BN_GF2m_mod [wrapper for BN_GF2m_mod_arr]
1092 BN_GF2m_mod_mul [wrapper for BN_GF2m_mod_mul_arr]
1093 BN_GF2m_mod_sqr [wrapper for BN_GF2m_mod_sqr_arr]
1095 BN_GF2m_mod_exp [wrapper for BN_GF2m_mod_exp_arr]
1096 BN_GF2m_mod_sqrt [wrapper for BN_GF2m_mod_sqrt_arr]
1097 BN_GF2m_mod_solve_quad [wrapper for BN_GF2m_mod_solve_quad_arr]
1098 BN_GF2m_cmp [= BN_ucmp]
1100 (Note that only the 'mod' functions are actually for fields GF(2^m).
1101 BN_GF2m_add() is misnomer, but this is for the sake of consistency.)
1103 For some functions, an the irreducible polynomial defining a
1104 field can be given as an 'unsigned int[]' with strictly
1105 decreasing elements giving the indices of those bits that are set;
1106 i.e., p[] represents the polynomial
1107 f(t) = t^p[0] + t^p[1] + ... + t^p[k]
1109 p[0] > p[1] > ... > p[k] = 0.
1110 This applies to the following functions:
1115 BN_GF2m_mod_inv_arr [wrapper for BN_GF2m_mod_inv]
1116 BN_GF2m_mod_div_arr [wrapper for BN_GF2m_mod_div]
1118 BN_GF2m_mod_sqrt_arr
1119 BN_GF2m_mod_solve_quad_arr
1123 Conversion can be performed by the following functions:
1128 bntest.c has additional tests for binary polynomial arithmetic.
1130 Two implementations for BN_GF2m_mod_div() are available.
1131 The default algorithm simply uses BN_GF2m_mod_inv() and
1132 BN_GF2m_mod_mul(). The alternative algorithm is compiled in only
1133 if OPENSSL_SUN_GF2M_DIV is defined (patent pending; read the
1134 copyright notice in crypto/bn/bn_gf2m.c before enabling it).
1136 [Sheueling Chang Shantz and Douglas Stebila
1137 (Sun Microsystems Laboratories)]
1139 *) Add new error code 'ERR_R_DISABLED' that can be used when some
1140 functionality is disabled at compile-time.
1141 [Douglas Stebila <douglas.stebila@sun.com>]
1143 *) Change default behaviour of 'openssl asn1parse' so that more
1144 information is visible when viewing, e.g., a certificate:
1146 Modify asn1_parse2 (crypto/asn1/asn1_par.c) so that in non-'dump'
1147 mode the content of non-printable OCTET STRINGs is output in a
1148 style similar to INTEGERs, but with '[HEX DUMP]' prepended to
1149 avoid the appearance of a printable string.
1150 [Nils Larsch <nla@trustcenter.de>]
1152 *) Add 'asn1_flag' and 'asn1_form' member to EC_GROUP with access
1154 EC_GROUP_set_asn1_flag()
1155 EC_GROUP_get_asn1_flag()
1156 EC_GROUP_set_point_conversion_form()
1157 EC_GROUP_get_point_conversion_form()
1158 These control ASN1 encoding details:
1159 - Curves (i.e., groups) are encoded explicitly unless asn1_flag
1160 has been set to OPENSSL_EC_NAMED_CURVE.
1161 - Points are encoded in uncompressed form by default; options for
1162 asn1_for are as for point2oct, namely
1163 POINT_CONVERSION_COMPRESSED
1164 POINT_CONVERSION_UNCOMPRESSED
1165 POINT_CONVERSION_HYBRID
1167 Also add 'seed' and 'seed_len' members to EC_GROUP with access
1170 EC_GROUP_get0_seed()
1171 EC_GROUP_get_seed_len()
1172 This is used only for ASN1 purposes (so far).
1173 [Nils Larsch <nla@trustcenter.de>]
1175 *) Add 'field_type' member to EC_METHOD, which holds the NID
1176 of the appropriate field type OID. The new function
1177 EC_METHOD_get_field_type() returns this value.
1178 [Nils Larsch <nla@trustcenter.de>]
1183 EC_POINT_point2hex()
1184 EC_POINT_hex2point()
1185 providing useful interfaces to EC_POINT_point2oct() and
1186 EC_POINT_oct2point().
1187 [Nils Larsch <nla@trustcenter.de>]
1189 *) Change internals of the EC library so that the functions
1190 EC_GROUP_set_generator()
1191 EC_GROUP_get_generator()
1192 EC_GROUP_get_order()
1193 EC_GROUP_get_cofactor()
1194 are implemented directly in crypto/ec/ec_lib.c and not dispatched
1195 to methods, which would lead to unnecessary code duplication when
1196 adding different types of curves.
1197 [Nils Larsch <nla@trustcenter.de> with input by Bodo Moeller]
1199 *) Implement compute_wNAF (crypto/ec/ec_mult.c) without BIGNUM
1200 arithmetic, and such that modified wNAFs are generated
1201 (which avoid length expansion in many cases).
1204 *) Add a function EC_GROUP_check_discriminant() (defined via
1205 EC_METHOD) that verifies that the curve discriminant is non-zero.
1207 Add a function EC_GROUP_check() that makes some sanity tests
1208 on a EC_GROUP, its generator and order. This includes
1209 EC_GROUP_check_discriminant().
1210 [Nils Larsch <nla@trustcenter.de>]
1212 *) Add ECDSA in new directory crypto/ecdsa/.
1214 Add applications 'openssl ecparam' and 'openssl ecdsa'
1215 (these are based on 'openssl dsaparam' and 'openssl dsa').
1217 ECDSA support is also included in various other files across the
1218 library. Most notably,
1219 - 'openssl req' now has a '-newkey ecdsa:file' option;
1220 - EVP_PKCS82PKEY (crypto/evp/evp_pkey.c) now can handle ECDSA;
1221 - X509_PUBKEY_get (crypto/asn1/x_pubkey.c) and
1222 d2i_PublicKey (crypto/asn1/d2i_pu.c) have been modified to make
1223 them suitable for ECDSA where domain parameters must be
1224 extracted before the specific public key;
1225 - ECDSA engine support has been added.
1226 [Nils Larsch <nla@trustcenter.de>]
1228 *) Include some named elliptic curves, and add OIDs from X9.62,
1229 SECG, and WAP/WTLS. Each curve can be obtained from the new
1231 EC_GROUP_new_by_curve_name(),
1232 and the list of available named curves can be obtained with
1233 EC_get_builtin_curves().
1234 Also add a 'curve_name' member to EC_GROUP objects, which can be
1236 EC_GROUP_set_curve_name()
1237 EC_GROUP_get_curve_name()
1238 [Nils Larsch <larsch@trustcenter.de, Bodo Moeller]
1240 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
1241 was actually never needed) and in BN_mul(). The removal in BN_mul()
1242 required a small change in bn_mul_part_recursive() and the addition
1243 of the functions bn_cmp_part_words(), bn_sub_part_words() and
1244 bn_add_part_words(), which do the same thing as bn_cmp_words(),
1245 bn_sub_words() and bn_add_words() except they take arrays with
1249 Changes between 0.9.7j and 0.9.7k [xx XXX xxxx]
1251 *) Disable rogue ciphersuites:
1253 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
1254 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
1255 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
1257 The latter two were purportedly from
1258 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
1261 Also deactive the remaining ciphersuites from
1262 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
1263 unofficial, and the ID has long expired.
1266 *) Fix RSA blinding Heisenbug (problems sometimes occured on
1267 dual-core machines) and other potential thread-safety issues.
1270 Changes between 0.9.7i and 0.9.7j [04 May 2006]
1272 *) Adapt fipsld and the build system to link against the validated FIPS
1273 module in FIPS mode.
1276 *) Fixes for VC++ 2005 build under Windows.
1279 *) Add new Windows build target VC-32-GMAKE for VC++. This uses GNU make
1280 from a Windows bash shell such as MSYS. It is autodetected from the
1281 "config" script when run from a VC++ environment. Modify standard VC++
1282 build to use fipscanister.o from the GNU make build.
1285 Changes between 0.9.7h and 0.9.7i [14 Oct 2005]
1287 *) Wrapped the definition of EVP_MAX_MD_SIZE in a #ifdef OPENSSL_FIPS.
1288 The value now differs depending on if you build for FIPS or not.
1289 BEWARE! A program linked with a shared FIPSed libcrypto can't be
1290 safely run with a non-FIPSed libcrypto, as it may crash because of
1291 the difference induced by this change.
1294 Changes between 0.9.7g and 0.9.7h [11 Oct 2005]
1296 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
1297 (part of SSL_OP_ALL). This option used to disable the
1298 countermeasure against man-in-the-middle protocol-version
1299 rollback in the SSL 2.0 server implementation, which is a bad
1300 idea. (CVE-2005-2969)
1302 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
1303 for Information Security, National Institute of Advanced Industrial
1304 Science and Technology [AIST], Japan)]
1306 *) Minimal support for X9.31 signatures and PSS padding modes. This is
1307 mainly for FIPS compliance and not fully integrated at this stage.
1310 *) For DSA signing, unless DSA_FLAG_NO_EXP_CONSTTIME is set, perform
1311 the exponentiation using a fixed-length exponent. (Otherwise,
1312 the information leaked through timing could expose the secret key
1313 after many signatures; cf. Bleichenbacher's attack on DSA with
1317 *) Make a new fixed-window mod_exp implementation the default for
1318 RSA, DSA, and DH private-key operations so that the sequence of
1319 squares and multiplies and the memory access pattern are
1320 independent of the particular secret key. This will mitigate
1321 cache-timing and potential related attacks.
1323 BN_mod_exp_mont_consttime() is the new exponentiation implementation,
1324 and this is automatically used by BN_mod_exp_mont() if the new flag
1325 BN_FLG_EXP_CONSTTIME is set for the exponent. RSA, DSA, and DH
1326 will use this BN flag for private exponents unless the flag
1327 RSA_FLAG_NO_EXP_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME, or
1328 DH_FLAG_NO_EXP_CONSTTIME, respectively, is set.
1330 [Matthew D Wood (Intel Corp), with some changes by Bodo Moeller]
1332 *) Change the client implementation for SSLv23_method() and
1333 SSLv23_client_method() so that is uses the SSL 3.0/TLS 1.0
1334 Client Hello message format if the SSL_OP_NO_SSLv2 option is set.
1335 (Previously, the SSL 2.0 backwards compatible Client Hello
1336 message format would be used even with SSL_OP_NO_SSLv2.)
1339 *) Add support for smime-type MIME parameter in S/MIME messages which some
1343 *) New function BN_MONT_CTX_set_locked() to set montgomery parameters in
1344 a threadsafe manner. Modify rsa code to use new function and add calls
1345 to dsa and dh code (which had race conditions before).
1348 *) Include the fixed error library code in the C error file definitions
1349 instead of fixing them up at runtime. This keeps the error code
1350 structures constant.
1353 Changes between 0.9.7f and 0.9.7g [11 Apr 2005]
1355 [NB: OpenSSL 0.9.7h and later 0.9.7 patch levels were released after
1358 *) Fixes for newer kerberos headers. NB: the casts are needed because
1359 the 'length' field is signed on one version and unsigned on another
1360 with no (?) obvious way to tell the difference, without these VC++
1361 complains. Also the "definition" of FAR (blank) is no longer included
1362 nor is the error ENOMEM. KRB5_PRIVATE has to be set to 1 to pick up
1363 some needed definitions.
1366 *) Undo Cygwin change.
1369 *) Added support for proxy certificates according to RFC 3820.
1370 Because they may be a security thread to unaware applications,
1371 they must be explicitely allowed in run-time. See
1372 docs/HOWTO/proxy_certificates.txt for further information.
1375 Changes between 0.9.7e and 0.9.7f [22 Mar 2005]
1377 *) Use (SSL_RANDOM_VALUE - 4) bytes of pseudo random data when generating
1378 server and client random values. Previously
1379 (SSL_RANDOM_VALUE - sizeof(time_t)) would be used which would result in
1380 less random data when sizeof(time_t) > 4 (some 64 bit platforms).
1382 This change has negligible security impact because:
1384 1. Server and client random values still have 24 bytes of pseudo random
1387 2. Server and client random values are sent in the clear in the initial
1390 3. The master secret is derived using the premaster secret (48 bytes in
1391 size for static RSA ciphersuites) as well as client server and random
1394 The OpenSSL team would like to thank the UK NISCC for bringing this issue
1397 [Stephen Henson, reported by UK NISCC]
1399 *) Use Windows randomness collection on Cygwin.
1402 *) Fix hang in EGD/PRNGD query when communication socket is closed
1403 prematurely by EGD/PRNGD.
1404 [Darren Tucker <dtucker@zip.com.au> via Lutz Jänicke, resolves #1014]
1406 *) Prompt for pass phrases when appropriate for PKCS12 input format.
1409 *) Back-port of selected performance improvements from development
1410 branch, as well as improved support for PowerPC platforms.
1413 *) Add lots of checks for memory allocation failure, error codes to indicate
1414 failure and freeing up memory if a failure occurs.
1415 [Nauticus Networks SSL Team <openssl@nauticusnet.com>, Steve Henson]
1417 *) Add new -passin argument to dgst.
1420 *) Perform some character comparisons of different types in X509_NAME_cmp:
1421 this is needed for some certificates that reencode DNs into UTF8Strings
1422 (in violation of RFC3280) and can't or wont issue name rollover
1426 *) Make an explicit check during certificate validation to see that
1427 the CA setting in each certificate on the chain is correct. As a
1428 side effect always do the following basic checks on extensions,
1429 not just when there's an associated purpose to the check:
1431 - if there is an unhandled critical extension (unless the user
1432 has chosen to ignore this fault)
1433 - if the path length has been exceeded (if one is set at all)
1434 - that certain extensions fit the associated purpose (if one has
1438 Changes between 0.9.7d and 0.9.7e [25 Oct 2004]
1440 *) Avoid a race condition when CRLs are checked in a multi threaded
1441 environment. This would happen due to the reordering of the revoked
1442 entries during signature checking and serial number lookup. Now the
1443 encoding is cached and the serial number sort performed under a lock.
1444 Add new STACK function sk_is_sorted().
1447 *) Add Delta CRL to the extension code.
1450 *) Various fixes to s3_pkt.c so alerts are sent properly.
1451 [David Holmes <d.holmes@f5.com>]
1453 *) Reduce the chances of duplicate issuer name and serial numbers (in
1454 violation of RFC3280) using the OpenSSL certificate creation utilities.
1455 This is done by creating a random 64 bit value for the initial serial
1456 number when a serial number file is created or when a self signed
1457 certificate is created using 'openssl req -x509'. The initial serial
1458 number file is created using 'openssl x509 -next_serial' in CA.pl
1459 rather than being initialized to 1.
1462 Changes between 0.9.7c and 0.9.7d [17 Mar 2004]
1464 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
1465 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
1466 [Joe Orton, Steve Henson]
1468 *) Fix flaw in SSL/TLS handshaking when using Kerberos ciphersuites
1470 [Joe Orton, Steve Henson]
1472 *) Make it possible to have multiple active certificates with the same
1473 subject in the CA index file. This is done only if the keyword
1474 'unique_subject' is set to 'no' in the main CA section (default
1475 if 'CA_default') of the configuration file. The value is saved
1476 with the database itself in a separate index attribute file,
1477 named like the index file with '.attr' appended to the name.
1480 *) X509 verify fixes. Disable broken certificate workarounds when
1481 X509_V_FLAGS_X509_STRICT is set. Check CRL issuer has cRLSign set if
1482 keyUsage extension present. Don't accept CRLs with unhandled critical
1483 extensions: since verify currently doesn't process CRL extensions this
1484 rejects a CRL with *any* critical extensions. Add new verify error codes
1488 *) When creating an OCSP nonce use an OCTET STRING inside the extnValue.
1489 A clarification of RFC2560 will require the use of OCTET STRINGs and
1490 some implementations cannot handle the current raw format. Since OpenSSL
1491 copies and compares OCSP nonces as opaque blobs without any attempt at
1492 parsing them this should not create any compatibility issues.
1495 *) New md flag EVP_MD_CTX_FLAG_REUSE this allows md_data to be reused when
1496 calling EVP_MD_CTX_copy_ex() to avoid calling OPENSSL_malloc(). Without
1497 this HMAC (and other) operations are several times slower than OpenSSL
1501 *) Print out GeneralizedTime and UTCTime in ASN1_STRING_print_ex().
1502 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
1504 *) Use the correct content when signing type "other".
1507 Changes between 0.9.7b and 0.9.7c [30 Sep 2003]
1509 *) Fix various bugs revealed by running the NISCC test suite:
1511 Stop out of bounds reads in the ASN1 code when presented with
1512 invalid tags (CVE-2003-0543 and CVE-2003-0544).
1514 Free up ASN1_TYPE correctly if ANY type is invalid (CVE-2003-0545).
1516 If verify callback ignores invalid public key errors don't try to check
1517 certificate signature with the NULL public key.
1521 *) New -ignore_err option in ocsp application to stop the server
1522 exiting on the first error in a request.
1525 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
1526 if the server requested one: as stated in TLS 1.0 and SSL 3.0
1530 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
1531 extra data after the compression methods not only for TLS 1.0
1532 but also for SSL 3.0 (as required by the specification).
1533 [Bodo Moeller; problem pointed out by Matthias Loepfe]
1535 *) Change X509_certificate_type() to mark the key as exported/exportable
1536 when it's 512 *bits* long, not 512 bytes.
1539 *) Change AES_cbc_encrypt() so it outputs exact multiple of
1540 blocks during encryption.
1543 *) Various fixes to base64 BIO and non blocking I/O. On write
1544 flushes were not handled properly if the BIO retried. On read
1545 data was not being buffered properly and had various logic bugs.
1546 This also affects blocking I/O when the data being decoded is a
1550 *) Various S/MIME bugfixes and compatibility changes:
1551 output correct application/pkcs7 MIME type if
1552 PKCS7_NOOLDMIMETYPE is set. Tolerate some broken signatures.
1553 Output CR+LF for EOL if PKCS7_CRLFEOL is set (this makes opening
1554 of files as .eml work). Correctly handle very long lines in MIME
1558 Changes between 0.9.7a and 0.9.7b [10 Apr 2003]
1560 *) Countermeasure against the Klima-Pokorny-Rosa extension of
1561 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
1562 a protocol version number mismatch like a decryption error
1563 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
1566 *) Turn on RSA blinding by default in the default implementation
1567 to avoid a timing attack. Applications that don't want it can call
1568 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
1569 They would be ill-advised to do so in most cases.
1570 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
1572 *) Change RSA blinding code so that it works when the PRNG is not
1573 seeded (in this case, the secret RSA exponent is abused as
1574 an unpredictable seed -- if it is not unpredictable, there
1575 is no point in blinding anyway). Make RSA blinding thread-safe
1576 by remembering the creator's thread ID in rsa->blinding and
1577 having all other threads use local one-time blinding factors
1578 (this requires more computation than sharing rsa->blinding, but
1579 avoids excessive locking; and if an RSA object is not shared
1580 between threads, blinding will still be very fast).
1583 *) Fixed a typo bug that would cause ENGINE_set_default() to set an
1584 ENGINE as defaults for all supported algorithms irrespective of
1585 the 'flags' parameter. 'flags' is now honoured, so applications
1586 should make sure they are passing it correctly.
1589 *) Target "mingw" now allows native Windows code to be generated in
1590 the Cygwin environment as well as with the MinGW compiler.
1593 Changes between 0.9.7 and 0.9.7a [19 Feb 2003]
1595 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
1596 via timing by performing a MAC computation even if incorrrect
1597 block cipher padding has been found. This is a countermeasure
1598 against active attacks where the attacker has to distinguish
1599 between bad padding and a MAC verification error. (CVE-2003-0078)
1601 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
1602 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
1603 Martin Vuagnoux (EPFL, Ilion)]
1605 *) Make the no-err option work as intended. The intention with no-err
1606 is not to have the whole error stack handling routines removed from
1607 libcrypto, it's only intended to remove all the function name and
1608 reason texts, thereby removing some of the footprint that may not
1609 be interesting if those errors aren't displayed anyway.
1611 NOTE: it's still possible for any application or module to have it's
1612 own set of error texts inserted. The routines are there, just not
1613 used by default when no-err is given.
1616 *) Add support for FreeBSD on IA64.
1617 [dirk.meyer@dinoex.sub.org via Richard Levitte, resolves #454]
1619 *) Adjust DES_cbc_cksum() so it returns the same value as the MIT
1620 Kerberos function mit_des_cbc_cksum(). Before this change,
1621 the value returned by DES_cbc_cksum() was like the one from
1622 mit_des_cbc_cksum(), except the bytes were swapped.
1623 [Kevin Greaney <Kevin.Greaney@hp.com> and Richard Levitte]
1625 *) Allow an application to disable the automatic SSL chain building.
1626 Before this a rather primitive chain build was always performed in
1627 ssl3_output_cert_chain(): an application had no way to send the
1628 correct chain if the automatic operation produced an incorrect result.
1630 Now the chain builder is disabled if either:
1632 1. Extra certificates are added via SSL_CTX_add_extra_chain_cert().
1634 2. The mode flag SSL_MODE_NO_AUTO_CHAIN is set.
1636 The reasoning behind this is that an application would not want the
1637 auto chain building to take place if extra chain certificates are
1638 present and it might also want a means of sending no additional
1639 certificates (for example the chain has two certificates and the
1643 *) Add the possibility to build without the ENGINE framework.
1644 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
1646 *) Under Win32 gmtime() can return NULL: check return value in
1647 OPENSSL_gmtime(). Add error code for case where gmtime() fails.
1650 *) DSA routines: under certain error conditions uninitialized BN objects
1651 could be freed. Solution: make sure initialization is performed early
1652 enough. (Reported and fix supplied by Ivan D Nestlerode <nestler@MIT.EDU>,
1653 Nils Larsch <nla@trustcenter.de> via PR#459)
1656 *) Another fix for SSLv2 session ID handling: the session ID was incorrectly
1657 checked on reconnect on the client side, therefore session resumption
1658 could still fail with a "ssl session id is different" error. This
1659 behaviour is masked when SSL_OP_ALL is used due to
1660 SSL_OP_MICROSOFT_SESS_ID_BUG being set.
1661 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
1662 followup to PR #377.
1665 *) IA-32 assembler support enhancements: unified ELF targets, support
1666 for SCO/Caldera platforms, fix for Cygwin shared build.
1669 *) Add support for FreeBSD on sparc64. As a consequence, support for
1670 FreeBSD on non-x86 processors is separate from x86 processors on
1671 the config script, much like the NetBSD support.
1672 [Richard Levitte & Kris Kennaway <kris@obsecurity.org>]
1674 Changes between 0.9.6h and 0.9.7 [31 Dec 2002]
1676 [NB: OpenSSL 0.9.6i and later 0.9.6 patch levels were released after
1679 *) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
1680 code (06) was taken as the first octet of the session ID and the last
1681 octet was ignored consequently. As a result SSLv2 client side session
1682 caching could not have worked due to the session ID mismatch between
1684 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
1688 *) Change the declaration of needed Kerberos libraries to use EX_LIBS
1689 instead of the special (and badly supported) LIBKRB5. LIBKRB5 is
1693 *) The hw_ncipher.c engine requires dynamic locks. Unfortunately, it
1694 seems that in spite of existing for more than a year, many application
1695 author have done nothing to provide the necessary callbacks, which
1696 means that this particular engine will not work properly anywhere.
1697 This is a very unfortunate situation which forces us, in the name
1698 of usability, to give the hw_ncipher.c a static lock, which is part
1700 NOTE: This is for the 0.9.7 series ONLY. This hack will never
1701 appear in 0.9.8 or later. We EXPECT application authors to have
1702 dealt properly with this when 0.9.8 is released (unless we actually
1703 make such changes in the libcrypto locking code that changes will
1704 have to be made anyway).
1707 *) In asn1_d2i_read_bio() repeatedly call BIO_read() until all content
1708 octets have been read, EOF or an error occurs. Without this change
1709 some truncated ASN1 structures will not produce an error.
1712 *) Disable Heimdal support, since it hasn't been fully implemented.
1713 Still give the possibility to force the use of Heimdal, but with
1714 warnings and a request that patches get sent to openssl-dev.
1717 *) Add the VC-CE target, introduce the WINCE sysname, and add
1718 INSTALL.WCE and appropriate conditionals to make it build.
1719 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
1721 *) Change the DLL names for Cygwin to cygcrypto-x.y.z.dll and
1722 cygssl-x.y.z.dll, where x, y and z are the major, minor and
1723 edit numbers of the version.
1724 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
1726 *) Introduce safe string copy and catenation functions
1727 (BUF_strlcpy() and BUF_strlcat()).
1728 [Ben Laurie (CHATS) and Richard Levitte]
1730 *) Avoid using fixed-size buffers for one-line DNs.
1731 [Ben Laurie (CHATS)]
1733 *) Add BUF_MEM_grow_clean() to avoid information leakage when
1734 resizing buffers containing secrets, and use where appropriate.
1735 [Ben Laurie (CHATS)]
1737 *) Avoid using fixed size buffers for configuration file location.
1738 [Ben Laurie (CHATS)]
1740 *) Avoid filename truncation for various CA files.
1741 [Ben Laurie (CHATS)]
1743 *) Use sizeof in preference to magic numbers.
1744 [Ben Laurie (CHATS)]
1746 *) Avoid filename truncation in cert requests.
1747 [Ben Laurie (CHATS)]
1749 *) Add assertions to check for (supposedly impossible) buffer
1751 [Ben Laurie (CHATS)]
1753 *) Don't cache truncated DNS entries in the local cache (this could
1754 potentially lead to a spoofing attack).
1755 [Ben Laurie (CHATS)]
1757 *) Fix various buffers to be large enough for hex/decimal
1758 representations in a platform independent manner.
1759 [Ben Laurie (CHATS)]
1761 *) Add CRYPTO_realloc_clean() to avoid information leakage when
1762 resizing buffers containing secrets, and use where appropriate.
1763 [Ben Laurie (CHATS)]
1765 *) Add BIO_indent() to avoid much slightly worrying code to do
1767 [Ben Laurie (CHATS)]
1769 *) Convert sprintf()/BIO_puts() to BIO_printf().
1770 [Ben Laurie (CHATS)]
1772 *) buffer_gets() could terminate with the buffer only half
1774 [Ben Laurie (CHATS)]
1776 *) Add assertions to prevent user-supplied crypto functions from
1777 overflowing internal buffers by having large block sizes, etc.
1778 [Ben Laurie (CHATS)]
1780 *) New OPENSSL_assert() macro (similar to assert(), but enabled
1782 [Ben Laurie (CHATS)]
1784 *) Eliminate unused copy of key in RC4.
1785 [Ben Laurie (CHATS)]
1787 *) Eliminate unused and incorrectly sized buffers for IV in pem.h.
1788 [Ben Laurie (CHATS)]
1790 *) Fix off-by-one error in EGD path.
1791 [Ben Laurie (CHATS)]
1793 *) If RANDFILE path is too long, ignore instead of truncating.
1794 [Ben Laurie (CHATS)]
1796 *) Eliminate unused and incorrectly sized X.509 structure
1798 [Ben Laurie (CHATS)]
1800 *) Eliminate unused and dangerous function knumber().
1801 [Ben Laurie (CHATS)]
1803 *) Eliminate unused and dangerous structure, KSSL_ERR.
1804 [Ben Laurie (CHATS)]
1806 *) Protect against overlong session ID context length in an encoded
1807 session object. Since these are local, this does not appear to be
1809 [Ben Laurie (CHATS)]
1811 *) Change from security patch (see 0.9.6e below) that did not affect
1812 the 0.9.6 release series:
1814 Remote buffer overflow in SSL3 protocol - an attacker could
1815 supply an oversized master key in Kerberos-enabled versions.
1817 [Ben Laurie (CHATS)]
1819 *) Change the SSL kerb5 codes to match RFC 2712.
1822 *) Make -nameopt work fully for req and add -reqopt switch.
1823 [Michael Bell <michael.bell@rz.hu-berlin.de>, Steve Henson]
1825 *) The "block size" for block ciphers in CFB and OFB mode should be 1.
1826 [Steve Henson, reported by Yngve Nysaeter Pettersen <yngve@opera.com>]
1828 *) Make sure tests can be performed even if the corresponding algorithms
1829 have been removed entirely. This was also the last step to make
1830 OpenSSL compilable with DJGPP under all reasonable conditions.
1831 [Richard Levitte, Doug Kaufman <dkaufman@rahul.net>]
1833 *) Add cipher selection rules COMPLEMENTOFALL and COMPLEMENTOFDEFAULT
1834 to allow version independent disabling of normally unselected ciphers,
1835 which may be activated as a side-effect of selecting a single cipher.
1837 (E.g., cipher list string "RSA" enables ciphersuites that are left
1838 out of "ALL" because they do not provide symmetric encryption.
1839 "RSA:!COMPLEMEMENTOFALL" avoids these unsafe ciphersuites.)
1840 [Lutz Jaenicke, Bodo Moeller]
1842 *) Add appropriate support for separate platform-dependent build
1843 directories. The recommended way to make a platform-dependent
1844 build directory is the following (tested on Linux), maybe with
1847 # Place yourself outside of the OpenSSL source tree. In
1848 # this example, the environment variable OPENSSL_SOURCE
1849 # is assumed to contain the absolute OpenSSL source directory.
1850 mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
1851 cd objtree/"`uname -s`-`uname -r`-`uname -m`"
1852 (cd $OPENSSL_SOURCE; find . -type f) | while read F; do
1853 mkdir -p `dirname $F`
1854 ln -s $OPENSSL_SOURCE/$F $F
1857 To be absolutely sure not to disturb the source tree, a "make clean"
1858 is a good thing. If it isn't successfull, don't worry about it,
1859 it probably means the source directory is very clean.
1862 *) Make sure any ENGINE control commands make local copies of string
1863 pointers passed to them whenever necessary. Otherwise it is possible
1864 the caller may have overwritten (or deallocated) the original string
1865 data when a later ENGINE operation tries to use the stored values.
1866 [Götz Babin-Ebell <babinebell@trustcenter.de>]
1868 *) Improve diagnostics in file reading and command-line digests.
1869 [Ben Laurie aided and abetted by Solar Designer <solar@openwall.com>]
1871 *) Add AES modes CFB and OFB to the object database. Correct an
1872 error in AES-CFB decryption.
1875 *) Remove most calls to EVP_CIPHER_CTX_cleanup() in evp_enc.c, this
1876 allows existing EVP_CIPHER_CTX structures to be reused after
1877 calling EVP_*Final(). This behaviour is used by encryption
1878 BIOs and some applications. This has the side effect that
1879 applications must explicitly clean up cipher contexts with
1880 EVP_CIPHER_CTX_cleanup() or they will leak memory.
1883 *) Check the values of dna and dnb in bn_mul_recursive before calling
1884 bn_mul_comba (a non zero value means the a or b arrays do not contain
1885 n2 elements) and fallback to bn_mul_normal if either is not zero.
1888 *) Fix escaping of non-ASCII characters when using the -subj option
1889 of the "openssl req" command line tool. (Robert Joop <joop@fokus.gmd.de>)
1892 *) Make object definitions compliant to LDAP (RFC2256): SN is the short
1893 form for "surname", serialNumber has no short form.
1894 Use "mail" as the short name for "rfc822Mailbox" according to RFC2798;
1895 therefore remove "mail" short name for "internet 7".
1896 The OID for unique identifiers in X509 certificates is
1897 x500UniqueIdentifier, not uniqueIdentifier.
1898 Some more OID additions. (Michael Bell <michael.bell@rz.hu-berlin.de>)
1901 *) Add an "init" command to the ENGINE config module and auto initialize
1902 ENGINEs. Without any "init" command the ENGINE will be initialized
1903 after all ctrl commands have been executed on it. If init=1 the
1904 ENGINE is initailized at that point (ctrls before that point are run
1905 on the uninitialized ENGINE and after on the initialized one). If
1906 init=0 then the ENGINE will not be iniatialized at all.
1909 *) Fix the 'app_verify_callback' interface so that the user-defined
1910 argument is actually passed to the callback: In the
1911 SSL_CTX_set_cert_verify_callback() prototype, the callback
1912 declaration has been changed from
1915 int (*cb)(X509_STORE_CTX *,void *);
1916 in ssl_verify_cert_chain (ssl/ssl_cert.c), the call
1917 i=s->ctx->app_verify_callback(&ctx)
1918 has been changed into
1919 i=s->ctx->app_verify_callback(&ctx, s->ctx->app_verify_arg).
1921 To update applications using SSL_CTX_set_cert_verify_callback(),
1922 a dummy argument can be added to their callback functions.
1923 [D. K. Smetters <smetters@parc.xerox.com>]
1925 *) Added the '4758cca' ENGINE to support IBM 4758 cards.
1926 [Maurice Gittens <maurice@gittens.nl>, touchups by Geoff Thorpe]
1928 *) Add and OPENSSL_LOAD_CONF define which will cause
1929 OpenSSL_add_all_algorithms() to load the openssl.cnf config file.
1930 This allows older applications to transparently support certain
1931 OpenSSL features: such as crypto acceleration and dynamic ENGINE loading.
1932 Two new functions OPENSSL_add_all_algorithms_noconf() which will never
1933 load the config file and OPENSSL_add_all_algorithms_conf() which will
1934 always load it have also been added.
1937 *) Add the OFB, CFB and CTR (all with 128 bit feedback) to AES.
1938 Adjust NIDs and EVP layer.
1939 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
1941 *) Config modules support in openssl utility.
1943 Most commands now load modules from the config file,
1944 though in a few (such as version) this isn't done
1945 because it couldn't be used for anything.
1947 In the case of ca and req the config file used is
1948 the same as the utility itself: that is the -config
1949 command line option can be used to specify an
1953 *) Move default behaviour from OPENSSL_config(). If appname is NULL
1954 use "openssl_conf" if filename is NULL use default openssl config file.
1957 *) Add an argument to OPENSSL_config() to allow the use of an alternative
1958 config section name. Add a new flag to tolerate a missing config file
1959 and move code to CONF_modules_load_file().
1962 *) Support for crypto accelerator cards from Accelerated Encryption
1963 Processing, www.aep.ie. (Use engine 'aep')
1964 The support was copied from 0.9.6c [engine] and adapted/corrected
1965 to work with the new engine framework.
1966 [AEP Inc. and Richard Levitte]
1968 *) Support for SureWare crypto accelerator cards from Baltimore
1969 Technologies. (Use engine 'sureware')
1970 The support was copied from 0.9.6c [engine] and adapted
1971 to work with the new engine framework.
1974 *) Have the CHIL engine fork-safe (as defined by nCipher) and actually
1975 make the newer ENGINE framework commands for the CHIL engine work.
1976 [Toomas Kiisk <vix@cyber.ee> and Richard Levitte]
1978 *) Make it possible to produce shared libraries on ReliantUNIX.
1979 [Robert Dahlem <Robert.Dahlem@ffm2.siemens.de> via Richard Levitte]
1981 *) Add the configuration target debug-linux-ppro.
1982 Make 'openssl rsa' use the general key loading routines
1983 implemented in apps.c, and make those routines able to
1984 handle the key format FORMAT_NETSCAPE and the variant
1986 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
1988 *) Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
1989 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
1991 *) Add -keyform to rsautl, and document -engine.
1992 [Richard Levitte, inspired by Toomas Kiisk <vix@cyber.ee>]
1994 *) Change BIO_new_file (crypto/bio/bss_file.c) to use new
1995 BIO_R_NO_SUCH_FILE error code rather than the generic
1996 ERR_R_SYS_LIB error code if fopen() fails with ENOENT.
1999 *) Add new functions
2001 ERR_peek_last_error_line
2002 ERR_peek_last_error_line_data.
2003 These are similar to
2006 ERR_peek_error_line_data,
2007 but report on the latest error recorded rather than the first one
2008 still in the error queue.
2009 [Ben Laurie, Bodo Moeller]
2011 *) default_algorithms option in ENGINE config module. This allows things
2013 default_algorithms = ALL
2014 default_algorithms = RSA, DSA, RAND, CIPHERS, DIGESTS
2017 *) Prelminary ENGINE config module.
2020 *) New experimental application configuration code.
2023 *) Change the AES code to follow the same name structure as all other
2024 symmetric ciphers, and behave the same way. Move everything to
2025 the directory crypto/aes, thereby obsoleting crypto/rijndael.
2026 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
2028 *) SECURITY: remove unsafe setjmp/signal interaction from ui_openssl.c.
2029 [Ben Laurie and Theo de Raadt]
2031 *) Add option to output public keys in req command.
2032 [Massimiliano Pala madwolf@openca.org]
2034 *) Use wNAFs in EC_POINTs_mul() for improved efficiency
2035 (up to about 10% better than before for P-192 and P-224).
2038 *) New functions/macros
2040 SSL_CTX_set_msg_callback(ctx, cb)
2041 SSL_CTX_set_msg_callback_arg(ctx, arg)
2042 SSL_set_msg_callback(ssl, cb)
2043 SSL_set_msg_callback_arg(ssl, arg)
2045 to request calling a callback function
2047 void cb(int write_p, int version, int content_type,
2048 const void *buf, size_t len, SSL *ssl, void *arg)
2050 whenever a protocol message has been completely received
2051 (write_p == 0) or sent (write_p == 1). Here 'version' is the
2052 protocol version according to which the SSL library interprets
2053 the current protocol message (SSL2_VERSION, SSL3_VERSION, or
2054 TLS1_VERSION). 'content_type' is 0 in the case of SSL 2.0, or
2055 the content type as defined in the SSL 3.0/TLS 1.0 protocol
2056 specification (change_cipher_spec(20), alert(21), handshake(22)).
2057 'buf' and 'len' point to the actual message, 'ssl' to the
2058 SSL object, and 'arg' is the application-defined value set by
2059 SSL[_CTX]_set_msg_callback_arg().
2061 'openssl s_client' and 'openssl s_server' have new '-msg' options
2062 to enable a callback that displays all protocol messages.
2065 *) Change the shared library support so shared libraries are built as
2066 soon as the corresponding static library is finished, and thereby get
2067 openssl and the test programs linked against the shared library.
2068 This still only happens when the keyword "shard" has been given to
2069 the configuration scripts.
2071 NOTE: shared library support is still an experimental thing, and
2072 backward binary compatibility is still not guaranteed.
2073 ["Maciej W. Rozycki" <macro@ds2.pg.gda.pl> and Richard Levitte]
2075 *) Add support for Subject Information Access extension.
2076 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
2078 *) Make BUF_MEM_grow() behaviour more consistent: Initialise to zero
2079 additional bytes when new memory had to be allocated, not just
2080 when reusing an existing buffer.
2083 *) New command line and configuration option 'utf8' for the req command.
2084 This allows field values to be specified as UTF8 strings.
2087 *) Add -multi and -mr options to "openssl speed" - giving multiple parallel
2088 runs for the former and machine-readable output for the latter.
2091 *) Add '-noemailDN' option to 'openssl ca'. This prevents inclusion
2092 of the e-mail address in the DN (i.e., it will go into a certificate
2093 extension only). The new configuration file option 'email_in_dn = no'
2094 has the same effect.
2095 [Massimiliano Pala madwolf@openca.org]
2097 *) Change all functions with names starting with des_ to be starting
2098 with DES_ instead. Add wrappers that are compatible with libdes,
2099 but are named _ossl_old_des_*. Finally, add macros that map the
2100 des_* symbols to the corresponding _ossl_old_des_* if libdes
2101 compatibility is desired. If OpenSSL 0.9.6c compatibility is
2102 desired, the des_* symbols will be mapped to DES_*, with one
2105 Since we provide two compatibility mappings, the user needs to
2106 define the macro OPENSSL_DES_LIBDES_COMPATIBILITY if libdes
2107 compatibility is desired. The default (i.e., when that macro
2108 isn't defined) is OpenSSL 0.9.6c compatibility.
2110 There are also macros that enable and disable the support of old
2111 des functions altogether. Those are OPENSSL_ENABLE_OLD_DES_SUPPORT
2112 and OPENSSL_DISABLE_OLD_DES_SUPPORT. If none or both of those
2113 are defined, the default will apply: to support the old des routines.
2115 In either case, one must include openssl/des.h to get the correct
2116 definitions. Do not try to just include openssl/des_old.h, that
2119 NOTE: This is a major break of an old API into a new one. Software
2120 authors are encouraged to switch to the DES_ style functions. Some
2121 time in the future, des_old.h and the libdes compatibility functions
2122 will be disable (i.e. OPENSSL_DISABLE_OLD_DES_SUPPORT will be the
2123 default), and then completely removed.
2126 *) Test for certificates which contain unsupported critical extensions.
2127 If such a certificate is found during a verify operation it is
2128 rejected by default: this behaviour can be overridden by either
2129 handling the new error X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION or
2130 by setting the verify flag X509_V_FLAG_IGNORE_CRITICAL. A new function
2131 X509_supported_extension() has also been added which returns 1 if a
2132 particular extension is supported.
2135 *) Modify the behaviour of EVP cipher functions in similar way to digests
2136 to retain compatibility with existing code.
2139 *) Modify the behaviour of EVP_DigestInit() and EVP_DigestFinal() to retain
2140 compatibility with existing code. In particular the 'ctx' parameter does
2141 not have to be to be initialized before the call to EVP_DigestInit() and
2142 it is tidied up after a call to EVP_DigestFinal(). New function
2143 EVP_DigestFinal_ex() which does not tidy up the ctx. Similarly function
2144 EVP_MD_CTX_copy() changed to not require the destination to be
2145 initialized valid and new function EVP_MD_CTX_copy_ex() added which
2146 requires the destination to be valid.
2148 Modify all the OpenSSL digest calls to use EVP_DigestInit_ex(),
2149 EVP_DigestFinal_ex() and EVP_MD_CTX_copy_ex().
2152 *) Change ssl3_get_message (ssl/s3_both.c) and the functions using it
2153 so that complete 'Handshake' protocol structures are kept in memory
2154 instead of overwriting 'msg_type' and 'length' with 'body' data.
2157 *) Add an implementation of SSL_add_dir_cert_subjects_to_stack for Win32.
2158 [Massimo Santin via Richard Levitte]
2160 *) Major restructuring to the underlying ENGINE code. This includes
2161 reduction of linker bloat, separation of pure "ENGINE" manipulation
2162 (initialisation, etc) from functionality dealing with implementations
2163 of specific crypto iterfaces. This change also introduces integrated
2164 support for symmetric ciphers and digest implementations - so ENGINEs
2165 can now accelerate these by providing EVP_CIPHER and EVP_MD
2166 implementations of their own. This is detailed in crypto/engine/README
2167 as it couldn't be adequately described here. However, there are a few
2168 API changes worth noting - some RSA, DSA, DH, and RAND functions that
2169 were changed in the original introduction of ENGINE code have now
2170 reverted back - the hooking from this code to ENGINE is now a good
2171 deal more passive and at run-time, operations deal directly with
2172 RSA_METHODs, DSA_METHODs (etc) as they did before, rather than
2173 dereferencing through an ENGINE pointer any more. Also, the ENGINE
2174 functions dealing with BN_MOD_EXP[_CRT] handlers have been removed -
2175 they were not being used by the framework as there is no concept of a
2176 BIGNUM_METHOD and they could not be generalised to the new
2177 'ENGINE_TABLE' mechanism that underlies the new code. Similarly,
2178 ENGINE_cpy() has been removed as it cannot be consistently defined in
2182 *) Change ASN1_GENERALIZEDTIME_check() to allow fractional seconds.
2185 *) Change mkdef.pl to sort symbols that get the same entry number,
2186 and make sure the automatically generated functions ERR_load_*
2187 become part of libeay.num as well.
2190 *) New function SSL_renegotiate_pending(). This returns true once
2191 renegotiation has been requested (either SSL_renegotiate() call
2192 or HelloRequest/ClientHello receveived from the peer) and becomes
2193 false once a handshake has been completed.
2194 (For servers, SSL_renegotiate() followed by SSL_do_handshake()
2195 sends a HelloRequest, but does not ensure that a handshake takes
2196 place. SSL_renegotiate_pending() is useful for checking if the
2197 client has followed the request.)
2200 *) New SSL option SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION.
2201 By default, clients may request session resumption even during
2202 renegotiation (if session ID contexts permit); with this option,
2203 session resumption is possible only in the first handshake.
2205 SSL_OP_ALL is now 0x00000FFFL instead of 0x000FFFFFL. This makes
2206 more bits available for options that should not be part of
2207 SSL_OP_ALL (such as SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION).
2210 *) Add some demos for certificate and certificate request creation.
2213 *) Make maximum certificate chain size accepted from the peer application
2214 settable (SSL*_get/set_max_cert_list()), as proposed by
2215 "Douglas E. Engert" <deengert@anl.gov>.
2218 *) Add support for shared libraries for Unixware-7
2219 (Boyd Lynn Gerber <gerberb@zenez.com>).
2222 *) Add a "destroy" handler to ENGINEs that allows structural cleanup to
2223 be done prior to destruction. Use this to unload error strings from
2224 ENGINEs that load their own error strings. NB: This adds two new API
2225 functions to "get" and "set" this destroy handler in an ENGINE.
2228 *) Alter all existing ENGINE implementations (except "openssl" and
2229 "openbsd") to dynamically instantiate their own error strings. This
2230 makes them more flexible to be built both as statically-linked ENGINEs
2231 and self-contained shared-libraries loadable via the "dynamic" ENGINE.
2232 Also, add stub code to each that makes building them as self-contained
2233 shared-libraries easier (see README.ENGINE).
2236 *) Add a "dynamic" ENGINE that provides a mechanism for binding ENGINE
2237 implementations into applications that are completely implemented in
2238 self-contained shared-libraries. The "dynamic" ENGINE exposes control
2239 commands that can be used to configure what shared-library to load and
2240 to control aspects of the way it is handled. Also, made an update to
2241 the README.ENGINE file that brings its information up-to-date and
2242 provides some information and instructions on the "dynamic" ENGINE
2243 (ie. how to use it, how to build "dynamic"-loadable ENGINEs, etc).
2246 *) Make it possible to unload ranges of ERR strings with a new
2247 "ERR_unload_strings" function.
2250 *) Add a copy() function to EVP_MD.
2253 *) Make EVP_MD routines take a context pointer instead of just the
2254 md_data void pointer.
2257 *) Add flags to EVP_MD and EVP_MD_CTX. EVP_MD_FLAG_ONESHOT indicates
2258 that the digest can only process a single chunk of data
2259 (typically because it is provided by a piece of
2260 hardware). EVP_MD_CTX_FLAG_ONESHOT indicates that the application
2261 is only going to provide a single chunk of data, and hence the
2262 framework needn't accumulate the data for oneshot drivers.
2265 *) As with "ERR", make it possible to replace the underlying "ex_data"
2266 functions. This change also alters the storage and management of global
2267 ex_data state - it's now all inside ex_data.c and all "class" code (eg.
2268 RSA, BIO, SSL_CTX, etc) no longer stores its own STACKS and per-class
2269 index counters. The API functions that use this state have been changed
2270 to take a "class_index" rather than pointers to the class's local STACK
2271 and counter, and there is now an API function to dynamically create new
2272 classes. This centralisation allows us to (a) plug a lot of the
2273 thread-safety problems that existed, and (b) makes it possible to clean
2274 up all allocated state using "CRYPTO_cleanup_all_ex_data()". W.r.t. (b)
2275 such data would previously have always leaked in application code and
2276 workarounds were in place to make the memory debugging turn a blind eye
2277 to it. Application code that doesn't use this new function will still
2278 leak as before, but their memory debugging output will announce it now
2279 rather than letting it slide.
2281 Besides the addition of CRYPTO_cleanup_all_ex_data(), another API change
2282 induced by the "ex_data" overhaul is that X509_STORE_CTX_init() now
2283 has a return value to indicate success or failure.
2286 *) Make it possible to replace the underlying "ERR" functions such that the
2287 global state (2 LHASH tables and 2 locks) is only used by the "default"
2288 implementation. This change also adds two functions to "get" and "set"
2289 the implementation prior to it being automatically set the first time
2290 any other ERR function takes place. Ie. an application can call "get",
2291 pass the return value to a module it has just loaded, and that module
2292 can call its own "set" function using that value. This means the
2293 module's "ERR" operations will use (and modify) the error state in the
2294 application and not in its own statically linked copy of OpenSSL code.
2297 *) Give DH, DSA, and RSA types their own "**_up_ref()" function to increment
2298 reference counts. This performs normal REF_PRINT/REF_CHECK macros on
2299 the operation, and provides a more encapsulated way for external code
2300 (crypto/evp/ and ssl/) to do this. Also changed the evp and ssl code
2301 to use these functions rather than manually incrementing the counts.
2303 Also rename "DSO_up()" function to more descriptive "DSO_up_ref()".
2306 *) Add EVP test program.
2309 *) Add symmetric cipher support to ENGINE. Expect the API to change!
2312 *) New CRL functions: X509_CRL_set_version(), X509_CRL_set_issuer_name()
2313 X509_CRL_set_lastUpdate(), X509_CRL_set_nextUpdate(), X509_CRL_sort(),
2314 X509_REVOKED_set_serialNumber(), and X509_REVOKED_set_revocationDate().
2315 These allow a CRL to be built without having to access X509_CRL fields
2316 directly. Modify 'ca' application to use new functions.
2319 *) Move SSL_OP_TLS_ROLLBACK_BUG out of the SSL_OP_ALL list of recommended
2320 bug workarounds. Rollback attack detection is a security feature.
2321 The problem will only arise on OpenSSL servers when TLSv1 is not
2322 available (sslv3_server_method() or SSL_OP_NO_TLSv1).
2323 Software authors not wanting to support TLSv1 will have special reasons
2324 for their choice and can explicitly enable this option.
2325 [Bodo Moeller, Lutz Jaenicke]
2327 *) Rationalise EVP so it can be extended: don't include a union of
2328 cipher/digest structures, add init/cleanup functions for EVP_MD_CTX
2329 (similar to those existing for EVP_CIPHER_CTX).
2334 EVP_MD_CTX_init(&md); /* new function call */
2335 EVP_DigestInit(&md, EVP_sha1());
2336 EVP_DigestUpdate(&md, in, len);
2337 EVP_DigestFinal(&md, out, NULL);
2338 EVP_MD_CTX_cleanup(&md); /* new function call */
2342 *) Make DES key schedule conform to the usual scheme, as well as
2343 correcting its structure. This means that calls to DES functions
2344 now have to pass a pointer to a des_key_schedule instead of a
2345 plain des_key_schedule (which was actually always a pointer
2348 des_key_schedule ks;
2350 des_set_key_checked(..., &ks);
2351 des_ncbc_encrypt(..., &ks, ...);
2353 (Note that a later change renames 'des_...' into 'DES_...'.)
2356 *) Initial reduction of linker bloat: the use of some functions, such as
2357 PEM causes large amounts of unused functions to be linked in due to
2358 poor organisation. For example pem_all.c contains every PEM function
2359 which has a knock on effect of linking in large amounts of (unused)
2360 ASN1 code. Grouping together similar functions and splitting unrelated
2361 functions prevents this.
2364 *) Cleanup of EVP macros.
2367 *) Change historical references to {NID,SN,LN}_des_ede and ede3 to add the
2368 correct _ecb suffix.
2371 *) Add initial OCSP responder support to ocsp application. The
2372 revocation information is handled using the text based index
2373 use by the ca application. The responder can either handle
2374 requests generated internally, supplied in files (for example
2375 via a CGI script) or using an internal minimal server.
2378 *) Add configuration choices to get zlib compression for TLS.
2381 *) Changes to Kerberos SSL for RFC 2712 compliance:
2382 1. Implemented real KerberosWrapper, instead of just using
2383 KRB5 AP_REQ message. [Thanks to Simon Wilkinson <sxw@sxw.org.uk>]
2384 2. Implemented optional authenticator field of KerberosWrapper.
2386 Added openssl-style ASN.1 macros for Kerberos ticket, ap_req,
2387 and authenticator structs; see crypto/krb5/.
2389 Generalized Kerberos calls to support multiple Kerberos libraries.
2390 [Vern Staats <staatsvr@asc.hpc.mil>,
2391 Jeffrey Altman <jaltman@columbia.edu>
2392 via Richard Levitte]
2394 *) Cause 'openssl speed' to use fully hard-coded DSA keys as it
2395 already does with RSA. testdsa.h now has 'priv_key/pub_key'
2396 values for each of the key sizes rather than having just
2397 parameters (and 'speed' generating keys each time).
2400 *) Speed up EVP routines.
2403 type 8 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
2404 des-cbc 4408.85k 5560.51k 5778.46k 5862.20k 5825.16k
2405 des-cbc 4389.55k 5571.17k 5792.23k 5846.91k 5832.11k
2406 des-cbc 4394.32k 5575.92k 5807.44k 5848.37k 5841.30k
2408 des-cbc 3482.66k 5069.49k 5496.39k 5614.16k 5639.28k
2409 des-cbc 3480.74k 5068.76k 5510.34k 5609.87k 5635.52k
2410 des-cbc 3483.72k 5067.62k 5504.60k 5708.01k 5724.80k
2413 des-cbc 4660.16k 5650.19k 5807.19k 5827.13k 5783.32k
2415 des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k
2418 *) Added the OS2-EMX target.
2419 ["Brian Havard" <brianh@kheldar.apana.org.au> and Richard Levitte]
2421 *) Rewrite apps to use NCONF routines instead of the old CONF. New functions
2422 to support NCONF routines in extension code. New function CONF_set_nconf()
2423 to allow functions which take an NCONF to also handle the old LHASH
2424 structure: this means that the old CONF compatible routines can be
2425 retained (in particular wrt extensions) without having to duplicate the
2426 code. New function X509V3_add_ext_nconf_sk to add extensions to a stack.
2429 *) Enhance the general user interface with mechanisms for inner control
2430 and with possibilities to have yes/no kind of prompts.
2433 *) Change all calls to low level digest routines in the library and
2434 applications to use EVP. Add missing calls to HMAC_cleanup() and
2435 don't assume HMAC_CTX can be copied using memcpy().
2436 [Verdon Walker <VWalker@novell.com>, Steve Henson]
2438 *) Add the possibility to control engines through control names but with
2439 arbitrary arguments instead of just a string.
2440 Change the key loaders to take a UI_METHOD instead of a callback
2441 function pointer. NOTE: this breaks binary compatibility with earlier
2442 versions of OpenSSL [engine].
2443 Adapt the nCipher code for these new conditions and add a card insertion
2447 *) Enhance the general user interface with mechanisms to better support
2448 dialog box interfaces, application-defined prompts, the possibility
2449 to use defaults (for example default passwords from somewhere else)
2450 and interrupts/cancellations.
2453 *) Tidy up PKCS#12 attribute handling. Add support for the CSP name
2454 attribute in PKCS#12 files, add new -CSP option to pkcs12 utility.
2457 *) Fix a memory leak in 'sk_dup()' in the case reallocation fails. (Also
2458 tidy up some unnecessarily weird code in 'sk_new()').
2459 [Geoff, reported by Diego Tartara <dtartara@novamens.com>]
2461 *) Change the key loading routines for ENGINEs to use the same kind
2462 callback (pem_password_cb) as all other routines that need this
2466 *) Increase ENTROPY_NEEDED to 32 bytes, as Rijndael can operate with
2467 256 bit (=32 byte) keys. Of course seeding with more entropy bytes
2468 than this minimum value is recommended.
2471 *) New random seeder for OpenVMS, using the system process statistics
2472 that are easily reachable.
2475 *) Windows apparently can't transparently handle global
2476 variables defined in DLLs. Initialisations such as:
2478 const ASN1_ITEM *it = &ASN1_INTEGER_it;
2480 wont compile. This is used by the any applications that need to
2481 declare their own ASN1 modules. This was fixed by adding the option
2482 EXPORT_VAR_AS_FN to all Win32 platforms, although this isn't strictly
2483 needed for static libraries under Win32.
2486 *) New functions X509_PURPOSE_set() and X509_TRUST_set() to handle
2487 setting of purpose and trust fields. New X509_STORE trust and
2488 purpose functions and tidy up setting in other SSL functions.
2491 *) Add copies of X509_STORE_CTX fields and callbacks to X509_STORE
2492 structure. These are inherited by X509_STORE_CTX when it is
2493 initialised. This allows various defaults to be set in the
2494 X509_STORE structure (such as flags for CRL checking and custom
2495 purpose or trust settings) for functions which only use X509_STORE_CTX
2496 internally such as S/MIME.
2498 Modify X509_STORE_CTX_purpose_inherit() so it only sets purposes and
2499 trust settings if they are not set in X509_STORE. This allows X509_STORE
2500 purposes and trust (in S/MIME for example) to override any set by default.
2502 Add command line options for CRL checking to smime, s_client and s_server
2506 *) Initial CRL based revocation checking. If the CRL checking flag(s)
2507 are set then the CRL is looked up in the X509_STORE structure and
2508 its validity and signature checked, then if the certificate is found
2509 in the CRL the verify fails with a revoked error.
2511 Various new CRL related callbacks added to X509_STORE_CTX structure.
2513 Command line options added to 'verify' application to support this.
2515 This needs some additional work, such as being able to handle multiple
2516 CRLs with different times, extension based lookup (rather than just
2517 by subject name) and ultimately more complete V2 CRL extension
2521 *) Add a general user interface API (crypto/ui/). This is designed
2522 to replace things like des_read_password and friends (backward
2523 compatibility functions using this new API are provided).
2524 The purpose is to remove prompting functions from the DES code
2525 section as well as provide for prompting through dialog boxes in
2526 a window system and the like.
2529 *) Add "ex_data" support to ENGINE so implementations can add state at a
2530 per-structure level rather than having to store it globally.
2533 *) Make it possible for ENGINE structures to be copied when retrieved by
2534 ENGINE_by_id() if the ENGINE specifies a new flag: ENGINE_FLAGS_BY_ID_COPY.
2535 This causes the "original" ENGINE structure to act like a template,
2536 analogous to the RSA vs. RSA_METHOD type of separation. Because of this
2537 operational state can be localised to each ENGINE structure, despite the
2538 fact they all share the same "methods". New ENGINE structures returned in
2539 this case have no functional references and the return value is the single
2540 structural reference. This matches the single structural reference returned
2541 by ENGINE_by_id() normally, when it is incremented on the pre-existing
2545 *) Fix ASN1 decoder when decoding type ANY and V_ASN1_OTHER: since this
2546 needs to match any other type at all we need to manually clear the
2550 *) Changes to the "openssl engine" utility to include;
2551 - verbosity levels ('-v', '-vv', and '-vvv') that provide information
2552 about an ENGINE's available control commands.
2553 - executing control commands from command line arguments using the
2554 '-pre' and '-post' switches. '-post' is only used if '-t' is
2555 specified and the ENGINE is successfully initialised. The syntax for
2556 the individual commands are colon-separated, for example;
2557 openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so
2560 *) New dynamic control command support for ENGINEs. ENGINEs can now
2561 declare their own commands (numbers), names (strings), descriptions,
2562 and input types for run-time discovery by calling applications. A
2563 subset of these commands are implicitly classed as "executable"
2564 depending on their input type, and only these can be invoked through
2565 the new string-based API function ENGINE_ctrl_cmd_string(). (Eg. this
2566 can be based on user input, config files, etc). The distinction is
2567 that "executable" commands cannot return anything other than a boolean
2568 result and can only support numeric or string input, whereas some
2569 discoverable commands may only be for direct use through
2570 ENGINE_ctrl(), eg. supporting the exchange of binary data, function
2571 pointers, or other custom uses. The "executable" commands are to
2572 support parameterisations of ENGINE behaviour that can be
2573 unambiguously defined by ENGINEs and used consistently across any
2574 OpenSSL-based application. Commands have been added to all the
2575 existing hardware-supporting ENGINEs, noticeably "SO_PATH" to allow
2576 control over shared-library paths without source code alterations.
2579 *) Changed all ENGINE implementations to dynamically allocate their
2580 ENGINEs rather than declaring them statically. Apart from this being
2581 necessary with the removal of the ENGINE_FLAGS_MALLOCED distinction,
2582 this also allows the implementations to compile without using the
2583 internal engine_int.h header.
2586 *) Minor adjustment to "rand" code. RAND_get_rand_method() now returns a
2587 'const' value. Any code that should be able to modify a RAND_METHOD
2588 should already have non-const pointers to it (ie. they should only
2589 modify their own ones).
2592 *) Made a variety of little tweaks to the ENGINE code.
2593 - "atalla" and "ubsec" string definitions were moved from header files
2594 to C code. "nuron" string definitions were placed in variables
2595 rather than hard-coded - allowing parameterisation of these values
2596 later on via ctrl() commands.
2597 - Removed unused "#if 0"'d code.
2598 - Fixed engine list iteration code so it uses ENGINE_free() to release
2599 structural references.
2600 - Constified the RAND_METHOD element of ENGINE structures.
2601 - Constified various get/set functions as appropriate and added
2602 missing functions (including a catch-all ENGINE_cpy that duplicates
2603 all ENGINE values onto a new ENGINE except reference counts/state).
2604 - Removed NULL parameter checks in get/set functions. Setting a method
2605 or function to NULL is a way of cancelling out a previously set
2606 value. Passing a NULL ENGINE parameter is just plain stupid anyway
2607 and doesn't justify the extra error symbols and code.
2608 - Deprecate the ENGINE_FLAGS_MALLOCED define and move the area for
2609 flags from engine_int.h to engine.h.
2610 - Changed prototypes for ENGINE handler functions (init(), finish(),
2611 ctrl(), key-load functions, etc) to take an (ENGINE*) parameter.
2614 *) Implement binary inversion algorithm for BN_mod_inverse in addition
2615 to the algorithm using long division. The binary algorithm can be
2616 used only if the modulus is odd. On 32-bit systems, it is faster
2617 only for relatively small moduli (roughly 20-30% for 128-bit moduli,
2618 roughly 5-15% for 256-bit moduli), so we use it only for moduli
2619 up to 450 bits. In 64-bit environments, the binary algorithm
2620 appears to be advantageous for much longer moduli; here we use it
2621 for moduli up to 2048 bits.
2624 *) Rewrite CHOICE field setting in ASN1_item_ex_d2i(). The old code
2625 could not support the combine flag in choice fields.
2628 *) Add a 'copy_extensions' option to the 'ca' utility. This copies
2629 extensions from a certificate request to the certificate.
2632 *) Allow multiple 'certopt' and 'nameopt' options to be separated
2633 by commas. Add 'namopt' and 'certopt' options to the 'ca' config
2634 file: this allows the display of the certificate about to be
2635 signed to be customised, to allow certain fields to be included
2636 or excluded and extension details. The old system didn't display
2637 multicharacter strings properly, omitted fields not in the policy
2638 and couldn't display additional details such as extensions.
2641 *) Function EC_POINTs_mul for multiple scalar multiplication
2642 of an arbitrary number of elliptic curve points
2643 \sum scalars[i]*points[i],
2644 optionally including the generator defined for the EC_GROUP:
2645 scalar*generator + \sum scalars[i]*points[i].
2647 EC_POINT_mul is a simple wrapper function for the typical case
2648 that the point list has just one item (besides the optional
2652 *) First EC_METHODs for curves over GF(p):
2654 EC_GFp_simple_method() uses the basic BN_mod_mul and BN_mod_sqr
2655 operations and provides various method functions that can also
2656 operate with faster implementations of modular arithmetic.
2658 EC_GFp_mont_method() reuses most functions that are part of
2659 EC_GFp_simple_method, but uses Montgomery arithmetic.
2661 [Bodo Moeller; point addition and point doubling
2662 implementation directly derived from source code provided by
2663 Lenka Fibikova <fibikova@exp-math.uni-essen.de>]
2665 *) Framework for elliptic curves (crypto/ec/ec.h, crypto/ec/ec_lcl.h,
2666 crypto/ec/ec_lib.c):
2668 Curves are EC_GROUP objects (with an optional group generator)
2669 based on EC_METHODs that are built into the library.
2671 Points are EC_POINT objects based on EC_GROUP objects.
2673 Most of the framework would be able to handle curves over arbitrary
2674 finite fields, but as there are no obvious types for fields other
2675 than GF(p), some functions are limited to that for now.
2678 *) Add the -HTTP option to s_server. It is similar to -WWW, but requires
2679 that the file contains a complete HTTP response.
2682 *) Add the ec directory to mkdef.pl and mkfiles.pl. In mkdef.pl
2683 change the def and num file printf format specifier from "%-40sXXX"
2684 to "%-39s XXX". The latter will always guarantee a space after the
2685 field while the former will cause them to run together if the field
2686 is 40 of more characters long.
2689 *) Constify the cipher and digest 'method' functions and structures
2690 and modify related functions to take constant EVP_MD and EVP_CIPHER
2694 *) Hide BN_CTX structure details in bn_lcl.h instead of publishing them
2695 in <openssl/bn.h>. Also further increase BN_CTX_NUM to 32.
2698 *) Modify EVP_Digest*() routines so they now return values. Although the
2699 internal software routines can never fail additional hardware versions
2703 *) Clean up crypto/err/err.h and change some error codes to avoid conflicts:
2705 Previously ERR_R_FATAL was too small and coincided with ERR_LIB_PKCS7
2706 (= ERR_R_PKCS7_LIB); it is now 64 instead of 32.
2709 ERR_R_NESTED_ASN1_ERROR
2711 ERR_R_MISSING_ASN1_EOS
2712 were 4 .. 9, conflicting with
2713 ERR_LIB_RSA (= ERR_R_RSA_LIB)
2715 ERR_LIB_PEM (= ERR_R_PEM_LIB).
2716 They are now 58 .. 63 (i.e., just below ERR_R_FATAL).
2718 Add new error code 'ERR_R_INTERNAL_ERROR'.
2721 *) Don't overuse locks in crypto/err/err.c: For data retrieval, CRYPTO_r_lock
2725 *) New option '-subj arg' for 'openssl req' and 'openssl ca'. This
2726 sets the subject name for a new request or supersedes the
2727 subject name in a given request. Formats that can be parsed are
2728 'CN=Some Name, OU=myOU, C=IT'
2730 'CN=Some Name/OU=myOU/C=IT'.
2732 Add options '-batch' and '-verbose' to 'openssl req'.
2733 [Massimiliano Pala <madwolf@hackmasters.net>]
2735 *) Introduce the possibility to access global variables through
2736 functions on platform were that's the best way to handle exporting
2737 global variables in shared libraries. To enable this functionality,
2738 one must configure with "EXPORT_VAR_AS_FN" or defined the C macro
2739 "OPENSSL_EXPORT_VAR_AS_FUNCTION" in crypto/opensslconf.h (the latter
2740 is normally done by Configure or something similar).
2742 To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL
2743 in the source file (foo.c) like this:
2745 OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
2746 OPENSSL_IMPLEMENT_GLOBAL(double,bar);
2748 To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL
2749 and OPENSSL_GLOBAL_REF in the header file (foo.h) like this:
2751 OPENSSL_DECLARE_GLOBAL(int,foo);
2752 #define foo OPENSSL_GLOBAL_REF(foo)
2753 OPENSSL_DECLARE_GLOBAL(double,bar);
2754 #define bar OPENSSL_GLOBAL_REF(bar)
2756 The #defines are very important, and therefore so is including the
2757 header file everywhere where the defined globals are used.
2759 The macro OPENSSL_EXPORT_VAR_AS_FUNCTION also affects the definition
2760 of ASN.1 items, but that structure is a bit different.
2762 The largest change is in util/mkdef.pl which has been enhanced with
2763 better and easier to understand logic to choose which symbols should
2764 go into the Windows .def files as well as a number of fixes and code
2765 cleanup (among others, algorithm keywords are now sorted
2766 lexicographically to avoid constant rewrites).
2769 *) In BN_div() keep a copy of the sign of 'num' before writing the
2770 result to 'rm' because if rm==num the value will be overwritten
2771 and produce the wrong result if 'num' is negative: this caused
2772 problems with BN_mod() and BN_nnmod().
2775 *) Function OCSP_request_verify(). This checks the signature on an
2776 OCSP request and verifies the signer certificate. The signer
2777 certificate is just checked for a generic purpose and OCSP request
2781 *) Add OCSP_check_validity() function to check the validity of OCSP
2782 responses. OCSP responses are prepared in real time and may only
2783 be a few seconds old. Simply checking that the current time lies
2784 between thisUpdate and nextUpdate max reject otherwise valid responses
2785 caused by either OCSP responder or client clock inaccuracy. Instead
2786 we allow thisUpdate and nextUpdate to fall within a certain period of
2787 the current time. The age of the response can also optionally be
2788 checked. Two new options -validity_period and -status_age added to
2792 *) If signature or public key algorithm is unrecognized print out its
2793 OID rather that just UNKNOWN.
2796 *) Change OCSP_cert_to_id() to tolerate a NULL subject certificate and
2797 OCSP_cert_id_new() a NULL serialNumber. This allows a partial certificate
2798 ID to be generated from the issuer certificate alone which can then be
2799 passed to OCSP_id_issuer_cmp().
2802 *) New compilation option ASN1_ITEM_FUNCTIONS. This causes the new
2803 ASN1 modules to export functions returning ASN1_ITEM pointers
2804 instead of the ASN1_ITEM structures themselves. This adds several
2805 new macros which allow the underlying ASN1 function/structure to
2806 be accessed transparently. As a result code should not use ASN1_ITEM
2807 references directly (such as &X509_it) but instead use the relevant
2808 macros (such as ASN1_ITEM_rptr(X509)). This option is to allow
2809 use of the new ASN1 code on platforms where exporting structures
2810 is problematical (for example in shared libraries) but exporting
2811 functions returning pointers to structures is not.
2814 *) Add support for overriding the generation of SSL/TLS session IDs.
2815 These callbacks can be registered either in an SSL_CTX or per SSL.
2816 The purpose of this is to allow applications to control, if they wish,
2817 the arbitrary values chosen for use as session IDs, particularly as it
2818 can be useful for session caching in multiple-server environments. A
2819 command-line switch for testing this (and any client code that wishes
2820 to use such a feature) has been added to "s_server".
2821 [Geoff Thorpe, Lutz Jaenicke]
2823 *) Modify mkdef.pl to recognise and parse preprocessor conditionals
2824 of the form '#if defined(...) || defined(...) || ...' and
2825 '#if !defined(...) && !defined(...) && ...'. This also avoids
2826 the growing number of special cases it was previously handling.
2829 *) Make all configuration macros available for application by making
2830 sure they are available in opensslconf.h, by giving them names starting
2831 with "OPENSSL_" to avoid conflicts with other packages and by making
2832 sure e_os2.h will cover all platform-specific cases together with
2834 Additionally, it is now possible to define configuration/platform-
2835 specific names (called "system identities"). In the C code, these
2836 are prefixed with "OPENSSL_SYSNAME_". e_os2.h will create another
2837 macro with the name beginning with "OPENSSL_SYS_", which is determined
2838 from "OPENSSL_SYSNAME_*" or compiler-specific macros depending on
2842 *) New option -set_serial to 'req' and 'x509' this allows the serial
2843 number to use to be specified on the command line. Previously self
2844 signed certificates were hard coded with serial number 0 and the
2845 CA options of 'x509' had to use a serial number in a file which was
2849 *) New options to 'ca' utility to support V2 CRL entry extensions.
2850 Currently CRL reason, invalidity date and hold instruction are
2851 supported. Add new CRL extensions to V3 code and some new objects.
2854 *) New function EVP_CIPHER_CTX_set_padding() this is used to
2855 disable standard block padding (aka PKCS#5 padding) in the EVP
2856 API, which was previously mandatory. This means that the data is
2857 not padded in any way and so the total length much be a multiple
2858 of the block size, otherwise an error occurs.
2861 *) Initial (incomplete) OCSP SSL support.
2864 *) New function OCSP_parse_url(). This splits up a URL into its host,
2865 port and path components: primarily to parse OCSP URLs. New -url
2866 option to ocsp utility.
2869 *) New nonce behavior. The return value of OCSP_check_nonce() now
2870 reflects the various checks performed. Applications can decide
2871 whether to tolerate certain situations such as an absent nonce
2872 in a response when one was present in a request: the ocsp application
2873 just prints out a warning. New function OCSP_add1_basic_nonce()
2874 this is to allow responders to include a nonce in a response even if
2875 the request is nonce-less.
2878 *) Disable stdin buffering in load_cert (apps/apps.c) so that no certs are
2879 skipped when using openssl x509 multiple times on a single input file,
2880 e.g. "(openssl x509 -out cert1; openssl x509 -out cert2) <certs".
2883 *) Make ASN1_UTCTIME_set_string() and ASN1_GENERALIZEDTIME_set_string()
2884 set string type: to handle setting ASN1_TIME structures. Fix ca
2885 utility to correctly initialize revocation date of CRLs.
2888 *) New option SSL_OP_CIPHER_SERVER_PREFERENCE allows the server to override
2889 the clients preferred ciphersuites and rather use its own preferences.
2890 Should help to work around M$ SGC (Server Gated Cryptography) bug in
2891 Internet Explorer by ensuring unchanged hash method during stepup.
2892 (Also replaces the broken/deactivated SSL_OP_NON_EXPORT_FIRST option.)
2895 *) Make mkdef.pl recognise all DECLARE_ASN1 macros, change rijndael
2896 to aes and add a new 'exist' option to print out symbols that don't
2900 *) Additional options to ocsp utility to allow flags to be set and
2901 additional certificates supplied.
2904 *) Add the option -VAfile to 'openssl ocsp', so the user can give the
2905 OCSP client a number of certificate to only verify the response
2909 *) Update Rijndael code to version 3.0 and change EVP AES ciphers to
2910 handle the new API. Currently only ECB, CBC modes supported. Add new
2913 Add TLS AES ciphersuites as described in RFC3268, "Advanced
2914 Encryption Standard (AES) Ciphersuites for Transport Layer
2915 Security (TLS)". (In beta versions of OpenSSL 0.9.7, these were
2916 not enabled by default and were not part of the "ALL" ciphersuite
2917 alias because they were not yet official; they could be
2918 explicitly requested by specifying the "AESdraft" ciphersuite
2919 group alias. In the final release of OpenSSL 0.9.7, the group
2920 alias is called "AES" and is part of "ALL".)
2921 [Ben Laurie, Steve Henson, Bodo Moeller]
2923 *) New function OCSP_copy_nonce() to copy nonce value (if present) from
2924 request to response.
2927 *) Functions for OCSP responders. OCSP_request_onereq_count(),
2928 OCSP_request_onereq_get0(), OCSP_onereq_get0_id() and OCSP_id_get0_info()
2929 extract information from a certificate request. OCSP_response_create()
2930 creates a response and optionally adds a basic response structure.
2931 OCSP_basic_add1_status() adds a complete single response to a basic
2932 response and returns the OCSP_SINGLERESP structure just added (to allow
2933 extensions to be included for example). OCSP_basic_add1_cert() adds a
2934 certificate to a basic response and OCSP_basic_sign() signs a basic
2935 response with various flags. New helper functions ASN1_TIME_check()
2936 (checks validity of ASN1_TIME structure) and ASN1_TIME_to_generalizedtime()
2937 (converts ASN1_TIME to GeneralizedTime).
2940 *) Various new functions. EVP_Digest() combines EVP_Digest{Init,Update,Final}()
2941 in a single operation. X509_get0_pubkey_bitstr() extracts the public_key
2942 structure from a certificate. X509_pubkey_digest() digests the public_key
2943 contents: this is used in various key identifiers.
2946 *) Make sk_sort() tolerate a NULL argument.
2947 [Steve Henson reported by Massimiliano Pala <madwolf@comune.modena.it>]
2949 *) New OCSP verify flag OCSP_TRUSTOTHER. When set the "other" certificates
2950 passed by the function are trusted implicitly. If any of them signed the
2951 response then it is assumed to be valid and is not verified.
2954 *) In PKCS7_set_type() initialise content_type in PKCS7_ENC_CONTENT
2955 to data. This was previously part of the PKCS7 ASN1 code. This
2956 was causing problems with OpenSSL created PKCS#12 and PKCS#7 structures.
2957 [Steve Henson, reported by Kenneth R. Robinette
2958 <support@securenetterm.com>]
2960 *) Add CRYPTO_push_info() and CRYPTO_pop_info() calls to new ASN1
2961 routines: without these tracing memory leaks is very painful.
2962 Fix leaks in PKCS12 and PKCS7 routines.
2965 *) Make X509_time_adj() cope with the new behaviour of ASN1_TIME_new().
2966 Previously it initialised the 'type' argument to V_ASN1_UTCTIME which
2967 effectively meant GeneralizedTime would never be used. Now it
2968 is initialised to -1 but X509_time_adj() now has to check the value
2969 and use ASN1_TIME_set() if the value is not V_ASN1_UTCTIME or
2970 V_ASN1_GENERALIZEDTIME, without this it always uses GeneralizedTime.
2971 [Steve Henson, reported by Kenneth R. Robinette
2972 <support@securenetterm.com>]
2974 *) Fixes to BN_to_ASN1_INTEGER when bn is zero. This would previously
2975 result in a zero length in the ASN1_INTEGER structure which was
2976 not consistent with the structure when d2i_ASN1_INTEGER() was used
2977 and would cause ASN1_INTEGER_cmp() to fail. Enhance s2i_ASN1_INTEGER()
2978 to cope with hex and negative integers. Fix bug in i2a_ASN1_INTEGER()
2979 where it did not print out a minus for negative ASN1_INTEGER.
2982 *) Add summary printout to ocsp utility. The various functions which
2983 convert status values to strings have been renamed to:
2984 OCSP_response_status_str(), OCSP_cert_status_str() and
2985 OCSP_crl_reason_str() and are no longer static. New options
2986 to verify nonce values and to disable verification. OCSP response
2987 printout format cleaned up.
2990 *) Add additional OCSP certificate checks. These are those specified
2991 in RFC2560. This consists of two separate checks: the CA of the
2992 certificate being checked must either be the OCSP signer certificate
2993 or the issuer of the OCSP signer certificate. In the latter case the
2994 OCSP signer certificate must contain the OCSP signing extended key
2995 usage. This check is performed by attempting to match the OCSP
2996 signer or the OCSP signer CA to the issuerNameHash and issuerKeyHash
2997 in the OCSP_CERTID structures of the response.
3000 *) Initial OCSP certificate verification added to OCSP_basic_verify()
3001 and related routines. This uses the standard OpenSSL certificate
3002 verify routines to perform initial checks (just CA validity) and
3003 to obtain the certificate chain. Then additional checks will be
3004 performed on the chain. Currently the root CA is checked to see
3005 if it is explicitly trusted for OCSP signing. This is used to set
3006 a root CA as a global signing root: that is any certificate that
3007 chains to that CA is an acceptable OCSP signing certificate.
3010 *) New '-extfile ...' option to 'openssl ca' for reading X.509v3
3011 extensions from a separate configuration file.
3012 As when reading extensions from the main configuration file,
3013 the '-extensions ...' option may be used for specifying the
3015 [Massimiliano Pala <madwolf@comune.modena.it>]
3017 *) New OCSP utility. Allows OCSP requests to be generated or
3018 read. The request can be sent to a responder and the output
3019 parsed, outputed or printed in text form. Not complete yet:
3020 still needs to check the OCSP response validity.
3023 *) New subcommands for 'openssl ca':
3024 'openssl ca -status <serial>' prints the status of the cert with
3025 the given serial number (according to the index file).
3026 'openssl ca -updatedb' updates the expiry status of certificates
3028 [Massimiliano Pala <madwolf@comune.modena.it>]
3030 *) New '-newreq-nodes' command option to CA.pl. This is like
3031 '-newreq', but calls 'openssl req' with the '-nodes' option
3032 so that the resulting key is not encrypted.
3033 [Damien Miller <djm@mindrot.org>]
3035 *) New configuration for the GNU Hurd.
3036 [Jonathan Bartlett <johnnyb@wolfram.com> via Richard Levitte]
3038 *) Initial code to implement OCSP basic response verify. This
3039 is currently incomplete. Currently just finds the signer's
3040 certificate and verifies the signature on the response.
3043 *) New SSLeay_version code SSLEAY_DIR to determine the compiled-in
3044 value of OPENSSLDIR. This is available via the new '-d' option
3045 to 'openssl version', and is also included in 'openssl version -a'.
3048 *) Allowing defining memory allocation callbacks that will be given
3049 file name and line number information in additional arguments
3050 (a const char* and an int). The basic functionality remains, as
3051 well as the original possibility to just replace malloc(),
3052 realloc() and free() by functions that do not know about these
3053 additional arguments. To register and find out the current
3054 settings for extended allocation functions, the following
3055 functions are provided:
3057 CRYPTO_set_mem_ex_functions
3058 CRYPTO_set_locked_mem_ex_functions
3059 CRYPTO_get_mem_ex_functions
3060 CRYPTO_get_locked_mem_ex_functions
3062 These work the same way as CRYPTO_set_mem_functions and friends.
3063 CRYPTO_get_[locked_]mem_functions now writes 0 where such an
3064 extended allocation function is enabled.
3065 Similarly, CRYPTO_get_[locked_]mem_ex_functions writes 0 where
3066 a conventional allocation function is enabled.
3067 [Richard Levitte, Bodo Moeller]
3069 *) Finish off removing the remaining LHASH function pointer casts.
3070 There should no longer be any prototype-casting required when using
3071 the LHASH abstraction, and any casts that remain are "bugs". See
3072 the callback types and macros at the head of lhash.h for details
3073 (and "OBJ_cleanup" in crypto/objects/obj_dat.c as an example).
3076 *) Add automatic query of EGD sockets in RAND_poll() for the unix variant.
3077 If /dev/[u]random devices are not available or do not return enough
3078 entropy, EGD style sockets (served by EGD or PRNGD) will automatically
3080 The locations /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool, and
3081 /etc/entropy will be queried once each in this sequence, quering stops
3082 when enough entropy was collected without querying more sockets.
3085 *) Change the Unix RAND_poll() variant to be able to poll several
3086 random devices, as specified by DEVRANDOM, until a sufficient amount
3087 of data has been collected. We spend at most 10 ms on each file
3088 (select timeout) and read in non-blocking mode. DEVRANDOM now
3089 defaults to the list "/dev/urandom", "/dev/random", "/dev/srandom"
3090 (previously it was just the string "/dev/urandom"), so on typical
3091 platforms the 10 ms delay will never occur.
3092 Also separate out the Unix variant to its own file, rand_unix.c.
3093 For VMS, there's a currently-empty rand_vms.c.
3096 *) Move OCSP client related routines to ocsp_cl.c. These
3097 provide utility functions which an application needing
3098 to issue a request to an OCSP responder and analyse the
3099 response will typically need: as opposed to those which an
3100 OCSP responder itself would need which will be added later.
3102 OCSP_request_sign() signs an OCSP request with an API similar
3103 to PKCS7_sign(). OCSP_response_status() returns status of OCSP
3104 response. OCSP_response_get1_basic() extracts basic response
3105 from response. OCSP_resp_find_status(): finds and extracts status
3106 information from an OCSP_CERTID structure (which will be created
3107 when the request structure is built). These are built from lower
3108 level functions which work on OCSP_SINGLERESP structures but
3109 wont normally be used unless the application wishes to examine
3110 extensions in the OCSP response for example.
3112 Replace nonce routines with a pair of functions.
3113 OCSP_request_add1_nonce() adds a nonce value and optionally
3114 generates a random value. OCSP_check_nonce() checks the
3115 validity of the nonce in an OCSP response.
3118 *) Change function OCSP_request_add() to OCSP_request_add0_id().
3119 This doesn't copy the supplied OCSP_CERTID and avoids the
3120 need to free up the newly created id. Change return type
3121 to OCSP_ONEREQ to return the internal OCSP_ONEREQ structure.
3122 This can then be used to add extensions to the request.
3123 Deleted OCSP_request_new(), since most of its functionality
3124 is now in OCSP_REQUEST_new() (and the case insensitive name
3125 clash) apart from the ability to set the request name which
3126 will be added elsewhere.
3129 *) Update OCSP API. Remove obsolete extensions argument from
3130 various functions. Extensions are now handled using the new
3131 OCSP extension code. New simple OCSP HTTP function which
3132 can be used to send requests and parse the response.
3135 *) Fix the PKCS#7 (S/MIME) code to work with new ASN1. Two new
3136 ASN1_ITEM structures help with sign and verify. PKCS7_ATTR_SIGN
3137 uses the special reorder version of SET OF to sort the attributes
3138 and reorder them to match the encoded order. This resolves a long
3139 standing problem: a verify on a PKCS7 structure just after signing
3140 it used to fail because the attribute order did not match the
3141 encoded order. PKCS7_ATTR_VERIFY does not reorder the attributes:
3142 it uses the received order. This is necessary to tolerate some broken
3143 software that does not order SET OF. This is handled by encoding
3144 as a SEQUENCE OF but using implicit tagging (with UNIVERSAL class)
3145 to produce the required SET OF.
3148 *) Have mk1mf.pl generate the macros OPENSSL_BUILD_SHLIBCRYPTO and
3149 OPENSSL_BUILD_SHLIBSSL and use them appropriately in the header
3150 files to get correct declarations of the ASN.1 item variables.
3153 *) Rewrite of PKCS#12 code to use new ASN1 functionality. Replace many
3154 PKCS#12 macros with real functions. Fix two unrelated ASN1 bugs:
3155 asn1_check_tlen() would sometimes attempt to use 'ctx' when it was
3156 NULL and ASN1_TYPE was not dereferenced properly in asn1_ex_c2i().
3157 New ASN1 macro: DECLARE_ASN1_ITEM() which just declares the relevant
3158 ASN1_ITEM and no wrapper functions.
3161 *) New functions or ASN1_item_d2i_fp() and ASN1_item_d2i_bio(). These
3162 replace the old function pointer based I/O routines. Change most of
3163 the *_d2i_bio() and *_d2i_fp() functions to use these.
3166 *) Enhance mkdef.pl to be more accepting about spacing in C preprocessor
3167 lines, recognice more "algorithms" that can be deselected, and make
3168 it complain about algorithm deselection that isn't recognised.
3171 *) New ASN1 functions to handle dup, sign, verify, digest, pack and
3172 unpack operations in terms of ASN1_ITEM. Modify existing wrappers
3173 to use new functions. Add NO_ASN1_OLD which can be set to remove
3174 some old style ASN1 functions: this can be used to determine if old
3175 code will still work when these eventually go away.
3178 *) New extension functions for OCSP structures, these follow the
3179 same conventions as certificates and CRLs.
3182 *) New function X509V3_add1_i2d(). This automatically encodes and
3183 adds an extension. Its behaviour can be customised with various
3184 flags to append, replace or delete. Various wrappers added for
3185 certifcates and CRLs.
3188 *) Fix to avoid calling the underlying ASN1 print routine when
3189 an extension cannot be parsed. Correct a typo in the
3190 OCSP_SERVICELOC extension. Tidy up print OCSP format.
3193 *) Make mkdef.pl parse some of the ASN1 macros and add apropriate
3194 entries for variables.
3197 *) Add functionality to apps/openssl.c for detecting locking
3198 problems: As the program is single-threaded, all we have
3199 to do is register a locking callback using an array for
3200 storing which locks are currently held by the program.
3203 *) Use a lock around the call to CRYPTO_get_ex_new_index() in
3204 SSL_get_ex_data_X509_STORE_idx(), which is used in
3205 ssl_verify_cert_chain() and thus can be called at any time
3206 during TLS/SSL handshakes so that thread-safety is essential.
3207 Unfortunately, the ex_data design is not at all suited
3208 for multi-threaded use, so it probably should be abolished.
3211 *) Added Broadcom "ubsec" ENGINE to OpenSSL.
3212 [Broadcom, tweaked and integrated by Geoff Thorpe]
3214 *) Move common extension printing code to new function
3215 X509V3_print_extensions(). Reorganise OCSP print routines and
3216 implement some needed OCSP ASN1 functions. Add OCSP extensions.
3219 *) New function X509_signature_print() to remove duplication in some
3223 *) Add a special meaning when SET OF and SEQUENCE OF flags are both
3224 set (this was treated exactly the same as SET OF previously). This
3225 is used to reorder the STACK representing the structure to match the
3226 encoding. This will be used to get round a problem where a PKCS7
3227 structure which was signed could not be verified because the STACK
3228 order did not reflect the encoded order.
3231 *) Reimplement the OCSP ASN1 module using the new code.
3234 *) Update the X509V3 code to permit the use of an ASN1_ITEM structure
3235 for its ASN1 operations. The old style function pointers still exist
3236 for now but they will eventually go away.
3239 *) Merge in replacement ASN1 code from the ASN1 branch. This almost
3240 completely replaces the old ASN1 functionality with a table driven
3241 encoder and decoder which interprets an ASN1_ITEM structure describing
3242 the ASN1 module. Compatibility with the existing ASN1 API (i2d,d2i) is
3243 largely maintained. Almost all of the old asn1_mac.h macro based ASN1
3244 has also been converted to the new form.
3247 *) Change BN_mod_exp_recp so that negative moduli are tolerated
3248 (the sign is ignored). Similarly, ignore the sign in BN_MONT_CTX_set
3249 so that BN_mod_exp_mont and BN_mod_exp_mont_word work
3250 for negative moduli.
3253 *) Fix BN_uadd and BN_usub: Always return non-negative results instead
3254 of not touching the result's sign bit.
3257 *) BN_div bugfix: If the result is 0, the sign (res->neg) must not be
3261 *) Changed the LHASH code to use prototypes for callbacks, and created
3262 macros to declare and implement thin (optionally static) functions
3263 that provide type-safety and avoid function pointer casting for the
3264 type-specific callbacks.
3267 *) Added Kerberos Cipher Suites to be used with TLS, as written in
3269 [Veers Staats <staatsvr@asc.hpc.mil>,
3270 Jeffrey Altman <jaltman@columbia.edu>, via Richard Levitte]
3272 *) Reformat the FAQ so the different questions and answers can be divided
3273 in sections depending on the subject.
3276 *) Have the zlib compression code load ZLIB.DLL dynamically under
3280 *) New function BN_mod_sqrt for computing square roots modulo a prime
3281 (using the probabilistic Tonelli-Shanks algorithm unless
3282 p == 3 (mod 4) or p == 5 (mod 8), which are cases that can
3283 be handled deterministically).
3284 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
3286 *) Make BN_mod_inverse faster by explicitly handling small quotients
3287 in the Euclid loop. (Speed gain about 20% for small moduli [256 or
3288 512 bits], about 30% for larger ones [1024 or 2048 bits].)
3291 *) New function BN_kronecker.
3294 *) Fix BN_gcd so that it works on negative inputs; the result is
3295 positive unless both parameters are zero.
3296 Previously something reasonably close to an infinite loop was
3297 possible because numbers could be growing instead of shrinking
3298 in the implementation of Euclid's algorithm.
3301 *) Fix BN_is_word() and BN_is_one() macros to take into account the
3302 sign of the number in question.
3304 Fix BN_is_word(a,w) to work correctly for w == 0.
3306 The old BN_is_word(a,w) macro is now called BN_abs_is_word(a,w)
3307 because its test if the absolute value of 'a' equals 'w'.
3308 Note that BN_abs_is_word does *not* handle w == 0 reliably;
3309 it exists mostly for use in the implementations of BN_is_zero(),
3310 BN_is_one(), and BN_is_word().
3313 *) New function BN_swap.
3316 *) Use BN_nnmod instead of BN_mod in crypto/bn/bn_exp.c so that
3317 the exponentiation functions are more likely to produce reasonable
3318 results on negative inputs.
3321 *) Change BN_mod_mul so that the result is always non-negative.
3322 Previously, it could be negative if one of the factors was negative;
3323 I don't think anyone really wanted that behaviour.
3326 *) Move BN_mod_... functions into new file crypto/bn/bn_mod.c
3327 (except for exponentiation, which stays in crypto/bn/bn_exp.c,
3328 and BN_mod_mul_reciprocal, which stays in crypto/bn/bn_recp.c)
3329 and add new functions:
3338 BN_mod_lshift1_quick
3342 These functions always generate non-negative results.
3344 BN_nnmod otherwise is like BN_mod (if BN_mod computes a remainder r
3345 such that |m| < r < 0, BN_nnmod will output rem + |m| instead).
3347 BN_mod_XXX_quick(r, a, [b,] m) generates the same result as
3348 BN_mod_XXX(r, a, [b,] m, ctx), but requires that a [and b]
3349 be reduced modulo m.
3350 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
3353 The following entry accidentily appeared in the CHANGES file
3354 distributed with OpenSSL 0.9.7. The modifications described in
3355 it do *not* apply to OpenSSL 0.9.7.
3357 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
3358 was actually never needed) and in BN_mul(). The removal in BN_mul()
3359 required a small change in bn_mul_part_recursive() and the addition
3360 of the functions bn_cmp_part_words(), bn_sub_part_words() and
3361 bn_add_part_words(), which do the same thing as bn_cmp_words(),
3362 bn_sub_words() and bn_add_words() except they take arrays with
3367 *) In 'openssl passwd', verify passwords read from the terminal
3368 unless the '-salt' option is used (which usually means that
3369 verification would just waste user's time since the resulting
3370 hash is going to be compared with some given password hash)
3371 or the new '-noverify' option is used.
3373 This is an incompatible change, but it does not affect
3374 non-interactive use of 'openssl passwd' (passwords on the command
3375 line, '-stdin' option, '-in ...' option) and thus should not
3379 *) Remove all references to RSAref, since there's no more need for it.
3382 *) Make DSO load along a path given through an environment variable
3383 (SHLIB_PATH) with shl_load().
3386 *) Constify the ENGINE code as a result of BIGNUM constification.
3387 Also constify the RSA code and most things related to it. In a
3388 few places, most notable in the depth of the ASN.1 code, ugly
3389 casts back to non-const were required (to be solved at a later
3393 *) Make it so the openssl application has all engines loaded by default.
3396 *) Constify the BIGNUM routines a little more.
3399 *) Add the following functions:
3401 ENGINE_load_cswift()
3403 ENGINE_load_atalla()
3405 ENGINE_load_builtin_engines()
3407 That way, an application can itself choose if external engines that
3408 are built-in in OpenSSL shall ever be used or not. The benefit is
3409 that applications won't have to be linked with libdl or other dso
3410 libraries unless it's really needed.
3412 Changed 'openssl engine' to load all engines on demand.
3413 Changed the engine header files to avoid the duplication of some
3414 declarations (they differed!).
3417 *) 'openssl engine' can now list capabilities.
3420 *) Better error reporting in 'openssl engine'.
3423 *) Never call load_dh_param(NULL) in s_server.
3426 *) Add engine application. It can currently list engines by name and
3427 identity, and test if they are actually available.
3430 *) Improve RPM specification file by forcing symbolic linking and making
3431 sure the installed documentation is also owned by root.root.
3432 [Damien Miller <djm@mindrot.org>]
3434 *) Give the OpenSSL applications more possibilities to make use of
3435 keys (public as well as private) handled by engines.
3438 *) Add OCSP code that comes from CertCo.
3441 *) Add VMS support for the Rijndael code.
3444 *) Added untested support for Nuron crypto accelerator.
3447 *) Add support for external cryptographic devices. This code was
3448 previously distributed separately as the "engine" branch.
3449 [Geoff Thorpe, Richard Levitte]
3451 *) Rework the filename-translation in the DSO code. It is now possible to
3452 have far greater control over how a "name" is turned into a filename
3453 depending on the operating environment and any oddities about the
3454 different shared library filenames on each system.
3457 *) Support threads on FreeBSD-elf in Configure.
3460 *) Fix for SHA1 assembly problem with MASM: it produces
3461 warnings about corrupt line number information when assembling
3462 with debugging information. This is caused by the overlapping
3464 [Bernd Matthes <mainbug@celocom.de>, Steve Henson]
3467 NCONF_get_number() has no error checking at all. As a replacement,
3468 NCONF_get_number_e() is defined (_e for "error checking") and is
3469 promoted strongly. The old NCONF_get_number is kept around for
3470 binary backward compatibility.
3471 Make it possible for methods to load from something other than a BIO,
3472 by providing a function pointer that is given a name instead of a BIO.
3473 For example, this could be used to load configuration data from an
3477 *) Fix for non blocking accept BIOs. Added new I/O special reason
3478 BIO_RR_ACCEPT to cover this case. Previously use of accept BIOs
3479 with non blocking I/O was not possible because no retry code was
3480 implemented. Also added new SSL code SSL_WANT_ACCEPT to cover
3484 *) Added the beginnings of Rijndael support.
3487 *) Fix for bug in DirectoryString mask setting. Add support for
3488 X509_NAME_print_ex() in 'req' and X509_print_ex() function
3489 to allow certificate printing to more controllable, additional
3490 'certopt' option to 'x509' to allow new printing options to be
3494 *) Clean old EAY MD5 hack from e_os.h.
3497 Changes between 0.9.6l and 0.9.6m [17 Mar 2004]
3499 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
3500 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
3501 [Joe Orton, Steve Henson]
3503 Changes between 0.9.6k and 0.9.6l [04 Nov 2003]
3505 *) Fix additional bug revealed by the NISCC test suite:
3507 Stop bug triggering large recursion when presented with
3508 certain ASN.1 tags (CVE-2003-0851)
3511 Changes between 0.9.6j and 0.9.6k [30 Sep 2003]
3513 *) Fix various bugs revealed by running the NISCC test suite:
3515 Stop out of bounds reads in the ASN1 code when presented with
3516 invalid tags (CVE-2003-0543 and CVE-2003-0544).
3518 If verify callback ignores invalid public key errors don't try to check
3519 certificate signature with the NULL public key.
3523 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
3524 if the server requested one: as stated in TLS 1.0 and SSL 3.0
3528 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
3529 extra data after the compression methods not only for TLS 1.0
3530 but also for SSL 3.0 (as required by the specification).
3531 [Bodo Moeller; problem pointed out by Matthias Loepfe]
3533 *) Change X509_certificate_type() to mark the key as exported/exportable
3534 when it's 512 *bits* long, not 512 bytes.
3537 Changes between 0.9.6i and 0.9.6j [10 Apr 2003]
3539 *) Countermeasure against the Klima-Pokorny-Rosa extension of
3540 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
3541 a protocol version number mismatch like a decryption error
3542 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
3545 *) Turn on RSA blinding by default in the default implementation
3546 to avoid a timing attack. Applications that don't want it can call
3547 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
3548 They would be ill-advised to do so in most cases.
3549 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
3551 *) Change RSA blinding code so that it works when the PRNG is not
3552 seeded (in this case, the secret RSA exponent is abused as
3553 an unpredictable seed -- if it is not unpredictable, there
3554 is no point in blinding anyway). Make RSA blinding thread-safe
3555 by remembering the creator's thread ID in rsa->blinding and
3556 having all other threads use local one-time blinding factors
3557 (this requires more computation than sharing rsa->blinding, but
3558 avoids excessive locking; and if an RSA object is not shared
3559 between threads, blinding will still be very fast).
3562 Changes between 0.9.6h and 0.9.6i [19 Feb 2003]
3564 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
3565 via timing by performing a MAC computation even if incorrrect
3566 block cipher padding has been found. This is a countermeasure
3567 against active attacks where the attacker has to distinguish
3568 between bad padding and a MAC verification error. (CVE-2003-0078)
3570 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
3571 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
3572 Martin Vuagnoux (EPFL, Ilion)]
3574 Changes between 0.9.6g and 0.9.6h [5 Dec 2002]
3576 *) New function OPENSSL_cleanse(), which is used to cleanse a section of
3577 memory from it's contents. This is done with a counter that will
3578 place alternating values in each byte. This can be used to solve
3579 two issues: 1) the removal of calls to memset() by highly optimizing
3580 compilers, and 2) cleansing with other values than 0, since those can
3581 be read through on certain media, for example a swap space on disk.
3584 *) Bugfix: client side session caching did not work with external caching,
3585 because the session->cipher setting was not restored when reloading
3586 from the external cache. This problem was masked, when
3587 SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG (part of SSL_OP_ALL) was set.
3588 (Found by Steve Haslam <steve@araqnid.ddts.net>.)
3591 *) Fix client_certificate (ssl/s2_clnt.c): The permissible total
3592 length of the REQUEST-CERTIFICATE message is 18 .. 34, not 17 .. 33.
3593 [Zeev Lieber <zeev-l@yahoo.com>]
3595 *) Undo an undocumented change introduced in 0.9.6e which caused
3596 repeated calls to OpenSSL_add_all_ciphers() and
3597 OpenSSL_add_all_digests() to be ignored, even after calling
3601 *) Change the default configuration reader to deal with last line not
3602 being properly terminated.
3605 *) Change X509_NAME_cmp() so it applies the special rules on handling
3606 DN values that are of type PrintableString, as well as RDNs of type
3607 emailAddress where the value has the type ia5String.
3608 [stefank@valicert.com via Richard Levitte]
3610 *) Add a SSL_SESS_CACHE_NO_INTERNAL_STORE flag to take over half
3611 the job SSL_SESS_CACHE_NO_INTERNAL_LOOKUP was inconsistently
3612 doing, define a new flag (SSL_SESS_CACHE_NO_INTERNAL) to be
3613 the bitwise-OR of the two for use by the majority of applications
3614 wanting this behaviour, and update the docs. The documented
3615 behaviour and actual behaviour were inconsistent and had been
3616 changing anyway, so this is more a bug-fix than a behavioural
3618 [Geoff Thorpe, diagnosed by Nadav Har'El]
3620 *) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
3621 (the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
3624 *) Fix initialization code race conditions in
3625 SSLv23_method(), SSLv23_client_method(), SSLv23_server_method(),
3626 SSLv2_method(), SSLv2_client_method(), SSLv2_server_method(),
3627 SSLv3_method(), SSLv3_client_method(), SSLv3_server_method(),
3628 TLSv1_method(), TLSv1_client_method(), TLSv1_server_method(),
3629 ssl2_get_cipher_by_char(),
3630 ssl3_get_cipher_by_char().
3631 [Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
3633 *) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
3634 the cached sessions are flushed, as the remove_cb() might use ex_data
3635 contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
3636 (see [openssl.org #212]).
3637 [Geoff Thorpe, Lutz Jaenicke]
3639 *) Fix typo in OBJ_txt2obj which incorrectly passed the content
3640 length, instead of the encoding length to d2i_ASN1_OBJECT.
3643 Changes between 0.9.6f and 0.9.6g [9 Aug 2002]
3645 *) [In 0.9.6g-engine release:]
3646 Fix crypto/engine/vendor_defns/cswift.h for WIN32 (use '_stdcall').
3647 [Lynn Gazis <lgazis@rainbow.com>]
3649 Changes between 0.9.6e and 0.9.6f [8 Aug 2002]
3651 *) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
3652 and get fix the header length calculation.
3653 [Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
3654 Alon Kantor <alonk@checkpoint.com> (and others),
3657 *) Use proper error handling instead of 'assertions' in buffer
3658 overflow checks added in 0.9.6e. This prevents DoS (the
3659 assertions could call abort()).
3660 [Arne Ansper <arne@ats.cyber.ee>, Bodo Moeller]
3662 Changes between 0.9.6d and 0.9.6e [30 Jul 2002]
3664 *) Add various sanity checks to asn1_get_length() to reject
3665 the ASN1 length bytes if they exceed sizeof(long), will appear
3666 negative or the content length exceeds the length of the
3668 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
3670 *) Fix cipher selection routines: ciphers without encryption had no flags
3671 for the cipher strength set and where therefore not handled correctly
3672 by the selection routines (PR #130).
3675 *) Fix EVP_dsa_sha macro.
3679 SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
3680 for disabling the SSL 3.0/TLS 1.0 CBC vulnerability countermeasure
3681 that was added in OpenSSL 0.9.6d.
3683 As the countermeasure turned out to be incompatible with some
3684 broken SSL implementations, the new option is part of SSL_OP_ALL.
3685 SSL_OP_ALL is usually employed when compatibility with weird SSL
3686 implementations is desired (e.g. '-bugs' option to 's_client' and
3687 's_server'), so the new option is automatically set in many
3691 *) Changes in security patch:
3693 Changes marked "(CHATS)" were sponsored by the Defense Advanced
3694 Research Projects Agency (DARPA) and Air Force Research Laboratory,
3695 Air Force Materiel Command, USAF, under agreement number
3698 *) Add various sanity checks to asn1_get_length() to reject
3699 the ASN1 length bytes if they exceed sizeof(long), will appear
3700 negative or the content length exceeds the length of the
3701 supplied buffer. (CVE-2002-0659)
3702 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
3704 *) Assertions for various potential buffer overflows, not known to
3706 [Ben Laurie (CHATS)]
3708 *) Various temporary buffers to hold ASCII versions of integers were
3709 too small for 64 bit platforms. (CVE-2002-0655)
3710 [Matthew Byng-Maddick <mbm@aldigital.co.uk> and Ben Laurie (CHATS)>
3712 *) Remote buffer overflow in SSL3 protocol - an attacker could
3713 supply an oversized session ID to a client. (CVE-2002-0656)
3714 [Ben Laurie (CHATS)]
3716 *) Remote buffer overflow in SSL2 protocol - an attacker could
3717 supply an oversized client master key. (CVE-2002-0656)
3718 [Ben Laurie (CHATS)]
3720 Changes between 0.9.6c and 0.9.6d [9 May 2002]
3722 *) Fix crypto/asn1/a_sign.c so that 'parameters' is omitted (not
3723 encoded as NULL) with id-dsa-with-sha1.
3724 [Nils Larsch <nla@trustcenter.de>; problem pointed out by Bodo Moeller]
3726 *) Check various X509_...() return values in apps/req.c.
3727 [Nils Larsch <nla@trustcenter.de>]
3729 *) Fix BASE64 decode (EVP_DecodeUpdate) for data with CR/LF ended lines:
3730 an end-of-file condition would erronously be flagged, when the CRLF
3731 was just at the end of a processed block. The bug was discovered when
3732 processing data through a buffering memory BIO handing the data to a
3733 BASE64-decoding BIO. Bug fund and patch submitted by Pavel Tsekov
3734 <ptsekov@syntrex.com> and Nedelcho Stanev.
3737 *) Implement a countermeasure against a vulnerability recently found
3738 in CBC ciphersuites in SSL 3.0/TLS 1.0: Send an empty fragment
3739 before application data chunks to avoid the use of known IVs
3740 with data potentially chosen by the attacker.
3743 *) Fix length checks in ssl3_get_client_hello().
3746 *) TLS/SSL library bugfix: use s->s3->in_read_app_data differently
3747 to prevent ssl3_read_internal() from incorrectly assuming that
3748 ssl3_read_bytes() found application data while handshake
3749 processing was enabled when in fact s->s3->in_read_app_data was
3750 merely automatically cleared during the initial handshake.
3751 [Bodo Moeller; problem pointed out by Arne Ansper <arne@ats.cyber.ee>]
3753 *) Fix object definitions for Private and Enterprise: they were not
3754 recognized in their shortname (=lowercase) representation. Extend
3755 obj_dat.pl to issue an error when using undefined keywords instead
3756 of silently ignoring the problem (Svenning Sorensen
3757 <sss@sss.dnsalias.net>).
3760 *) Fix DH_generate_parameters() so that it works for 'non-standard'
3761 generators, i.e. generators other than 2 and 5. (Previously, the
3762 code did not properly initialise the 'add' and 'rem' values to
3763 BN_generate_prime().)
3765 In the new general case, we do not insist that 'generator' is
3766 actually a primitive root: This requirement is rather pointless;
3767 a generator of the order-q subgroup is just as good, if not
3771 *) Map new X509 verification errors to alerts. Discovered and submitted by
3772 Tom Wu <tom@arcot.com>.
3775 *) Fix ssl3_pending() (ssl/s3_lib.c) to prevent SSL_pending() from
3776 returning non-zero before the data has been completely received
3777 when using non-blocking I/O.
3778 [Bodo Moeller; problem pointed out by John Hughes]
3780 *) Some of the ciphers missed the strength entry (SSL_LOW etc).
3781 [Ben Laurie, Lutz Jaenicke]
3783 *) Fix bug in SSL_clear(): bad sessions were not removed (found by
3784 Yoram Zahavi <YoramZ@gilian.com>).
3787 *) Add information about CygWin 1.3 and on, and preserve proper
3788 configuration for the versions before that.
3789 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
3791 *) Make removal from session cache (SSL_CTX_remove_session()) more robust:
3792 check whether we deal with a copy of a session and do not delete from
3793 the cache in this case. Problem reported by "Izhar Shoshani Levi"
3794 <izhar@checkpoint.com>.
3797 *) Do not store session data into the internal session cache, if it
3798 is never intended to be looked up (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP
3799 flag is set). Proposed by Aslam <aslam@funk.com>.
3802 *) Have ASN1_BIT_STRING_set_bit() really clear a bit when the requested
3806 *) [In 0.9.6d-engine release:]
3807 Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
3808 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
3810 *) Add the configuration target linux-s390x.
3811 [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
3813 *) The earlier bugfix for the SSL3_ST_SW_HELLO_REQ_C case of
3814 ssl3_accept (ssl/s3_srvr.c) incorrectly used a local flag
3815 variable as an indication that a ClientHello message has been
3816 received. As the flag value will be lost between multiple
3817 invocations of ssl3_accept when using non-blocking I/O, the
3818 function may not be aware that a handshake has actually taken
3819 place, thus preventing a new session from being added to the
3822 To avoid this problem, we now set s->new_session to 2 instead of
3823 using a local variable.
3824 [Lutz Jaenicke, Bodo Moeller]
3826 *) Bugfix: Return -1 from ssl3_get_server_done (ssl3/s3_clnt.c)
3827 if the SSL_R_LENGTH_MISMATCH error is detected.
3828 [Geoff Thorpe, Bodo Moeller]
3830 *) New 'shared_ldflag' column in Configure platform table.
3833 *) Fix EVP_CIPHER_mode macro.
3834 ["Dan S. Camper" <dan@bti.net>]
3836 *) Fix ssl3_read_bytes (ssl/s3_pkt.c): To ignore messages of unknown
3837 type, we must throw them away by setting rr->length to 0.
3838 [D P Chang <dpc@qualys.com>]
3840 Changes between 0.9.6b and 0.9.6c [21 dec 2001]
3842 *) Fix BN_rand_range bug pointed out by Dominikus Scherkl
3843 <Dominikus.Scherkl@biodata.com>. (The previous implementation
3844 worked incorrectly for those cases where range = 10..._2 and
3845 3*range is two bits longer than range.)
3848 *) Only add signing time to PKCS7 structures if it is not already
3852 *) Fix crypto/objects/objects.h: "ld-ce" should be "id-ce",
3853 OBJ_ld_ce should be OBJ_id_ce.
3854 Also some ip-pda OIDs in crypto/objects/objects.txt were
3855 incorrect (cf. RFC 3039).
3856 [Matt Cooper, Frederic Giudicelli, Bodo Moeller]
3858 *) Release CRYPTO_LOCK_DYNLOCK when CRYPTO_destroy_dynlockid()
3859 returns early because it has nothing to do.
3860 [Andy Schneider <andy.schneider@bjss.co.uk>]
3862 *) [In 0.9.6c-engine release:]
3863 Fix mutex callback return values in crypto/engine/hw_ncipher.c.
3864 [Andy Schneider <andy.schneider@bjss.co.uk>]
3866 *) [In 0.9.6c-engine release:]
3867 Add support for Cryptographic Appliance's keyserver technology.
3868 (Use engine 'keyclient')
3869 [Cryptographic Appliances and Geoff Thorpe]
3871 *) Add a configuration entry for OS/390 Unix. The C compiler 'c89'
3872 is called via tools/c89.sh because arguments have to be
3873 rearranged (all '-L' options must appear before the first object
3875 [Richard Shapiro <rshapiro@abinitio.com>]
3877 *) [In 0.9.6c-engine release:]
3878 Add support for Broadcom crypto accelerator cards, backported
3880 [Broadcom, Nalin Dahyabhai <nalin@redhat.com>, Mark Cox]
3882 *) [In 0.9.6c-engine release:]
3883 Add support for SureWare crypto accelerator cards from
3884 Baltimore Technologies. (Use engine 'sureware')
3885 [Baltimore Technologies and Mark Cox]
3887 *) [In 0.9.6c-engine release:]
3888 Add support for crypto accelerator cards from Accelerated
3889 Encryption Processing, www.aep.ie. (Use engine 'aep')
3890 [AEP Inc. and Mark Cox]
3892 *) Add a configuration entry for gcc on UnixWare.
3893 [Gary Benson <gbenson@redhat.com>]
3895 *) Change ssl/s2_clnt.c and ssl/s2_srvr.c so that received handshake
3896 messages are stored in a single piece (fixed-length part and
3897 variable-length part combined) and fix various bugs found on the way.
3900 *) Disable caching in BIO_gethostbyname(), directly use gethostbyname()
3901 instead. BIO_gethostbyname() does not know what timeouts are
3902 appropriate, so entries would stay in cache even when they have
3904 [Bodo Moeller; problem pointed out by Rich Salz <rsalz@zolera.com>
3906 *) Change ssl23_get_client_hello (ssl/s23_srvr.c) behaviour when
3907 faced with a pathologically small ClientHello fragment that does
3908 not contain client_version: Instead of aborting with an error,
3909 simply choose the highest available protocol version (i.e.,
3910 TLS 1.0 unless it is disabled). In practice, ClientHello
3911 messages are never sent like this, but this change gives us
3912 strictly correct behaviour at least for TLS.
3915 *) Fix SSL handshake functions and SSL_clear() such that SSL_clear()
3916 never resets s->method to s->ctx->method when called from within
3917 one of the SSL handshake functions.
3918 [Bodo Moeller; problem pointed out by Niko Baric]
3920 *) In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert
3921 (sent using the client's version number) if client_version is
3922 smaller than the protocol version in use. Also change
3923 ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0 if
3924 the client demanded SSL 3.0 but only TLS 1.0 is enabled; then
3925 the client will at least see that alert.
3928 *) Fix ssl3_get_message (ssl/s3_both.c) to handle message fragmentation
3932 *) Avoid infinite loop in ssl3_get_message (ssl/s3_both.c) if a
3933 client receives HelloRequest while in a handshake.
3934 [Bodo Moeller; bug noticed by Andy Schneider <andy.schneider@bjss.co.uk>]
3936 *) Bugfix in ssl3_accept (ssl/s3_srvr.c): Case SSL3_ST_SW_HELLO_REQ_C
3937 should end in 'break', not 'goto end' which circuments various
3938 cleanups done in state SSL_ST_OK. But session related stuff
3939 must be disabled for SSL_ST_OK in the case that we just sent a
3942 Also avoid some overhead by not calling ssl_init_wbio_buffer()
3943 before just sending a HelloRequest.
3944 [Bodo Moeller, Eric Rescorla <ekr@rtfm.com>]
3946 *) Fix ssl/s3_enc.c, ssl/t1_enc.c and ssl/s3_pkt.c so that we don't
3947 reveal whether illegal block cipher padding was found or a MAC
3948 verification error occured. (Neither SSLerr() codes nor alerts
3949 are directly visible to potential attackers, but the information
3950 may leak via logfiles.)
3952 Similar changes are not required for the SSL 2.0 implementation
3953 because the number of padding bytes is sent in clear for SSL 2.0,
3954 and the extra bytes are just ignored. However ssl/s2_pkt.c
3955 failed to verify that the purported number of padding bytes is in
3959 *) Add OpenUNIX-8 support including shared libraries
3960 (Boyd Lynn Gerber <gerberb@zenez.com>).
3963 *) Improve RSA_padding_check_PKCS1_OAEP() check again to avoid
3964 'wristwatch attack' using huge encoding parameters (cf.
3965 James H. Manger's CRYPTO 2001 paper). Note that the
3966 RSA_PKCS1_OAEP_PADDING case of RSA_private_decrypt() does not use
3967 encoding parameters and hence was not vulnerable.
3970 *) BN_sqr() bug fix.
3971 [Ulf Möller, reported by Jim Ellis <jim.ellis@cavium.com>]
3973 *) Rabin-Miller test analyses assume uniformly distributed witnesses,
3974 so use BN_pseudo_rand_range() instead of using BN_pseudo_rand()
3975 followed by modular reduction.
3976 [Bodo Moeller; pointed out by Adam Young <AYoung1@NCSUS.JNJ.COM>]
3978 *) Add BN_pseudo_rand_range() with obvious functionality: BN_rand_range()
3979 equivalent based on BN_pseudo_rand() instead of BN_rand().
3982 *) s3_srvr.c: allow sending of large client certificate lists (> 16 kB).
3983 This function was broken, as the check for a new client hello message
3984 to handle SGC did not allow these large messages.
3985 (Tracked down by "Douglas E. Engert" <deengert@anl.gov>.)
3988 *) Add alert descriptions for TLSv1 to SSL_alert_desc_string[_long]().
3991 *) Fix buggy behaviour of BIO_get_num_renegotiates() and BIO_ctrl()
3992 for BIO_C_GET_WRITE_BUF_SIZE ("Stephen Hinton" <shinton@netopia.com>).
3995 *) Rework the configuration and shared library support for Tru64 Unix.
3996 The configuration part makes use of modern compiler features and
3997 still retains old compiler behavior for those that run older versions
3998 of the OS. The shared library support part includes a variant that
3999 uses the RPATH feature, and is available through the special
4000 configuration target "alpha-cc-rpath", which will never be selected
4002 [Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu> via Richard Levitte]
4004 *) In ssl3_get_key_exchange (ssl/s3_clnt.c), call ssl3_get_message()
4005 with the same message size as in ssl3_get_certificate_request().
4006 Otherwise, if no ServerKeyExchange message occurs, CertificateRequest
4007 messages might inadvertently be reject as too long.
4008 [Petr Lampa <lampa@fee.vutbr.cz>]
4010 *) Enhanced support for IA-64 Unix platforms (well, Linux and HP-UX).
4013 *) Modified SSL library such that the verify_callback that has been set
4014 specificly for an SSL object with SSL_set_verify() is actually being
4015 used. Before the change, a verify_callback set with this function was
4016 ignored and the verify_callback() set in the SSL_CTX at the time of
4017 the call was used. New function X509_STORE_CTX_set_verify_cb() introduced
4018 to allow the necessary settings.
4021 *) Initialize static variable in crypto/dsa/dsa_lib.c and crypto/dh/dh_lib.c
4022 explicitly to NULL, as at least on Solaris 8 this seems not always to be
4023 done automatically (in contradiction to the requirements of the C
4024 standard). This made problems when used from OpenSSH.
4027 *) In OpenSSL 0.9.6a and 0.9.6b, crypto/dh/dh_key.c ignored
4028 dh->length and always used
4030 BN_rand_range(priv_key, dh->p).
4032 BN_rand_range() is not necessary for Diffie-Hellman, and this
4033 specific range makes Diffie-Hellman unnecessarily inefficient if
4034 dh->length (recommended exponent length) is much smaller than the
4035 length of dh->p. We could use BN_rand_range() if the order of
4036 the subgroup was stored in the DH structure, but we only have
4041 BN_rand(priv_key, l, ...)
4043 where 'l' is dh->length if this is defined, or BN_num_bits(dh->p)-1
4049 RSA_eay_public_encrypt
4050 RSA_eay_private_decrypt
4051 RSA_eay_private_encrypt (signing)
4052 RSA_eay_public_decrypt (signature verification)
4054 (default implementations for RSA_public_encrypt,
4055 RSA_private_decrypt, RSA_private_encrypt, RSA_public_decrypt),
4056 always reject numbers >= n.
4059 *) In crypto/rand/md_rand.c, use a new short-time lock CRYPTO_LOCK_RAND2
4060 to synchronize access to 'locking_thread'. This is necessary on
4061 systems where access to 'locking_thread' (an 'unsigned long'
4062 variable) is not atomic.
4065 *) In crypto/rand/md_rand.c, set 'locking_thread' to current thread's ID
4066 *before* setting the 'crypto_lock_rand' flag. The previous code had
4067 a race condition if 0 is a valid thread ID.
4068 [Travis Vitek <vitek@roguewave.com>]
4070 *) Add support for shared libraries under Irix.
4071 [Albert Chin-A-Young <china@thewrittenword.com>]
4073 *) Add configuration option to build on Linux on both big-endian and
4075 [Ralf Baechle <ralf@uni-koblenz.de>]
4077 *) Add the possibility to create shared libraries on HP-UX.
4080 Changes between 0.9.6a and 0.9.6b [9 Jul 2001]
4082 *) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
4083 to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
4084 Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
4085 PRNG state recovery was possible based on the output of
4086 one PRNG request appropriately sized to gain knowledge on
4087 'md' followed by enough consecutive 1-byte PRNG requests
4088 to traverse all of 'state'.
4090 1. When updating 'md_local' (the current thread's copy of 'md')
4091 during PRNG output generation, hash all of the previous
4092 'md_local' value, not just the half used for PRNG output.
4094 2. Make the number of bytes from 'state' included into the hash
4095 independent from the number of PRNG bytes requested.
4097 The first measure alone would be sufficient to avoid
4098 Markku-Juhani's attack. (Actually it had never occurred
4099 to me that the half of 'md_local' used for chaining was the
4100 half from which PRNG output bytes were taken -- I had always
4101 assumed that the secret half would be used.) The second
4102 measure makes sure that additional data from 'state' is never
4103 mixed into 'md_local' in small portions; this heuristically
4104 further strengthens the PRNG.
4107 *) Fix crypto/bn/asm/mips3.s.
4110 *) When only the key is given to "enc", the IV is undefined. Print out
4111 an error message in this case.
4114 *) Handle special case when X509_NAME is empty in X509 printing routines.
4117 *) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
4118 positive and less than q.
4121 *) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
4122 used: it isn't thread safe and the add_lock_callback should handle
4124 [Paul Rose <Paul.Rose@bridge.com>]
4126 *) Verify that incoming data obeys the block size in
4127 ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
4131 [Ulf Möller, Bodo Möller]
4133 *) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
4134 RSA encryption was accidentally removed in s3_srvr.c in OpenSSL 0.9.5
4135 when fixing the server behaviour for backwards-compatible 'client
4136 hello' messages. (Note that the attack is impractical against
4137 SSL 3.0 and TLS 1.0 anyway because length and version checking
4138 means that the probability of guessing a valid ciphertext is
4139 around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
4142 Before 0.9.5, the countermeasure (hide the error by generating a
4143 random 'decryption result') did not work properly because
4144 ERR_clear_error() was missing, meaning that SSL_get_error() would
4145 detect the supposedly ignored error.
4147 Both problems are now fixed.
4150 *) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
4151 (previously it was 1024).
4154 *) Fix for compatibility mode trust settings: ignore trust settings
4155 unless some valid trust or reject settings are present.
4158 *) Fix for blowfish EVP: its a variable length cipher.
4161 *) Fix various bugs related to DSA S/MIME verification. Handle missing
4162 parameters in DSA public key structures and return an error in the
4163 DSA routines if parameters are absent.
4166 *) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
4167 in the current directory if neither $RANDFILE nor $HOME was set.
4168 RAND_file_name() in 0.9.6a returned NULL in this case. This has
4169 caused some confusion to Windows users who haven't defined $HOME.
4170 Thus RAND_file_name() is changed again: e_os.h can define a
4171 DEFAULT_HOME, which will be used if $HOME is not set.
4172 For Windows, we use "C:"; on other platforms, we still require
4173 environment variables.
4175 *) Move 'if (!initialized) RAND_poll()' into regions protected by
4176 CRYPTO_LOCK_RAND. This is not strictly necessary, but avoids
4177 having multiple threads call RAND_poll() concurrently.
4180 *) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
4181 combination of a flag and a thread ID variable.
4182 Otherwise while one thread is in ssleay_rand_bytes (which sets the
4183 flag), *other* threads can enter ssleay_add_bytes without obeying
4184 the CRYPTO_LOCK_RAND lock (and may even illegally release the lock
4185 that they do not hold after the first thread unsets add_do_not_lock).
4188 *) Change bctest again: '-x' expressions are not available in all
4192 Changes between 0.9.6 and 0.9.6a [5 Apr 2001]
4194 *) Fix a couple of memory leaks in PKCS7_dataDecode()
4195 [Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
4197 *) Change Configure and Makefiles to provide EXE_EXT, which will contain
4198 the default extension for executables, if any. Also, make the perl
4199 scripts that use symlink() to test if it really exists and use "cp"
4200 if it doesn't. All this made OpenSSL compilable and installable in
4204 *) Fix for asn1_GetSequence() for indefinite length constructed data.
4205 If SEQUENCE is length is indefinite just set c->slen to the total
4206 amount of data available.
4207 [Steve Henson, reported by shige@FreeBSD.org]
4208 [This change does not apply to 0.9.7.]
4210 *) Change bctest to avoid here-documents inside command substitution
4211 (workaround for FreeBSD /bin/sh bug).
4212 For compatibility with Ultrix, avoid shell functions (introduced
4213 in the bctest version that searches along $PATH).
4216 *) Rename 'des_encrypt' to 'des_encrypt1'. This avoids the clashes
4217 with des_encrypt() defined on some operating systems, like Solaris
4221 *) Check the result of RSA-CRT (see D. Boneh, R. DeMillo, R. Lipton:
4222 On the Importance of Eliminating Errors in Cryptographic
4223 Computations, J. Cryptology 14 (2001) 2, 101-119,
4224 http://theory.stanford.edu/~dabo/papers/faults.ps.gz).
4227 *) MIPS assembler BIGNUM division bug fix.
4230 *) Disabled incorrect Alpha assembler code.
4233 *) Fix PKCS#7 decode routines so they correctly update the length
4234 after reading an EOC for the EXPLICIT tag.
4236 [This change does not apply to 0.9.7.]
4238 *) Fix bug in PKCS#12 key generation routines. This was triggered
4239 if a 3DES key was generated with a 0 initial byte. Include
4240 PKCS12_BROKEN_KEYGEN compilation option to retain the old
4241 (but broken) behaviour.
4244 *) Enhance bctest to search for a working bc along $PATH and print
4246 [Tim Rice <tim@multitalents.net> via Richard Levitte]
4248 *) Fix memory leaks in err.c: free err_data string if necessary;
4249 don't write to the wrong index in ERR_set_error_data.
4252 *) Implement ssl23_peek (analogous to ssl23_read), which previously
4256 *) Replace rdtsc with _emit statements for VC++ version 5.
4257 [Jeremy Cooper <jeremy@baymoo.org>]
4259 *) Make it possible to reuse SSLv2 sessions.
4262 *) In copy_email() check for >= 0 as a return value for
4263 X509_NAME_get_index_by_NID() since 0 is a valid index.
4264 [Steve Henson reported by Massimiliano Pala <madwolf@opensca.org>]
4266 *) Avoid coredump with unsupported or invalid public keys by checking if
4267 X509_get_pubkey() fails in PKCS7_verify(). Fix memory leak when
4268 PKCS7_verify() fails with non detached data.
4271 *) Don't use getenv in library functions when run as setuid/setgid.
4272 New function OPENSSL_issetugid().
4275 *) Avoid false positives in memory leak detection code (crypto/mem_dbg.c)
4276 due to incorrect handling of multi-threading:
4278 1. Fix timing glitch in the MemCheck_off() portion of CRYPTO_mem_ctrl().
4280 2. Fix logical glitch in is_MemCheck_on() aka CRYPTO_is_mem_check_on().
4282 3. Count how many times MemCheck_off() has been called so that
4283 nested use can be treated correctly. This also avoids
4284 inband-signalling in the previous code (which relied on the
4285 assumption that thread ID 0 is impossible).
4288 *) Add "-rand" option also to s_client and s_server.
4291 *) Fix CPU detection on Irix 6.x.
4292 [Kurt Hockenbury <khockenb@stevens-tech.edu> and
4293 "Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
4295 *) Fix X509_NAME bug which produced incorrect encoding if X509_NAME
4298 [This change does not apply to 0.9.7.]
4300 *) Use the cached encoding of an X509_NAME structure rather than
4301 copying it. This is apparently the reason for the libsafe "errors"
4302 but the code is actually correct.
4305 *) Add new function BN_rand_range(), and fix DSA_sign_setup() to prevent
4306 Bleichenbacher's DSA attack.
4307 Extend BN_[pseudo_]rand: As before, top=1 forces the highest two bits
4308 to be set and top=0 forces the highest bit to be set; top=-1 is new
4309 and leaves the highest bit random.
4310 [Ulf Moeller, Bodo Moeller]
4312 *) In the NCONF_...-based implementations for CONF_... queries
4313 (crypto/conf/conf_lib.c), if the input LHASH is NULL, avoid using
4314 a temporary CONF structure with the data component set to NULL
4315 (which gives segmentation faults in lh_retrieve).
4316 Instead, use NULL for the CONF pointer in CONF_get_string and
4317 CONF_get_number (which may use environment variables) and directly
4318 return NULL from CONF_get_section.
4321 *) Fix potential buffer overrun for EBCDIC.
4324 *) Tolerate nonRepudiation as being valid for S/MIME signing and certSign
4325 keyUsage if basicConstraints absent for a CA.
4328 *) Make SMIME_write_PKCS7() write mail header values with a format that
4329 is more generally accepted (no spaces before the semicolon), since
4330 some programs can't parse those values properly otherwise. Also make
4331 sure BIO's that break lines after each write do not create invalid
4335 *) Make the CRL encoding routines work with empty SEQUENCE OF. The
4336 macros previously used would not encode an empty SEQUENCE OF
4337 and break the signature.
4339 [This change does not apply to 0.9.7.]
4341 *) Zero the premaster secret after deriving the master secret in
4345 *) Add some EVP_add_digest_alias registrations (as found in
4346 OpenSSL_add_all_digests()) to SSL_library_init()
4347 aka OpenSSL_add_ssl_algorithms(). This provides improved
4348 compatibility with peers using X.509 certificates
4349 with unconventional AlgorithmIdentifier OIDs.
4352 *) Fix for Irix with NO_ASM.
4353 ["Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
4355 *) ./config script fixes.
4356 [Ulf Moeller, Richard Levitte]
4358 *) Fix 'openssl passwd -1'.
4361 *) Change PKCS12_key_gen_asc() so it can cope with non null
4362 terminated strings whose length is passed in the passlen
4363 parameter, for example from PEM callbacks. This was done
4364 by adding an extra length parameter to asc2uni().
4365 [Steve Henson, reported by <oddissey@samsung.co.kr>]
4367 *) Fix C code generated by 'openssl dsaparam -C': If a BN_bin2bn
4368 call failed, free the DSA structure.
4371 *) Fix to uni2asc() to cope with zero length Unicode strings.
4372 These are present in some PKCS#12 files.
4375 *) Increase s2->wbuf allocation by one byte in ssl2_new (ssl/s2_lib.c).
4376 Otherwise do_ssl_write (ssl/s2_pkt.c) will write beyond buffer limits
4377 when writing a 32767 byte record.
4378 [Bodo Moeller; problem reported by Eric Day <eday@concentric.net>]
4380 *) In RSA_eay_public_{en,ed}crypt and RSA_eay_mod_exp (rsa_eay.c),
4381 obtain lock CRYPTO_LOCK_RSA before setting rsa->_method_mod_{n,p,q}.
4383 (RSA objects have a reference count access to which is protected
4384 by CRYPTO_LOCK_RSA [see rsa_lib.c, s3_srvr.c, ssl_cert.c, ssl_rsa.c],
4385 so they are meant to be shared between threads.)
4386 [Bodo Moeller, Geoff Thorpe; original patch submitted by
4387 "Reddie, Steven" <Steven.Reddie@ca.com>]
4389 *) Fix a deadlock in CRYPTO_mem_leaks().
4392 *) Use better test patterns in bntest.
4395 *) rand_win.c fix for Borland C.
4398 *) BN_rshift bugfix for n == 0.
4401 *) Add a 'bctest' script that checks for some known 'bc' bugs
4402 so that 'make test' does not abort just because 'bc' is broken.
4405 *) Store verify_result within SSL_SESSION also for client side to
4406 avoid potential security hole. (Re-used sessions on the client side
4407 always resulted in verify_result==X509_V_OK, not using the original
4408 result of the server certificate verification.)
4411 *) Fix ssl3_pending: If the record in s->s3->rrec is not of type
4412 SSL3_RT_APPLICATION_DATA, return 0.
4413 Similarly, change ssl2_pending to return 0 if SSL_in_init(s) is true.
4417 Both ssl2_peek and ssl3_peek, which were totally broken in earlier
4418 releases, have been re-implemented by renaming the previous
4419 implementations of ssl2_read and ssl3_read to ssl2_read_internal
4420 and ssl3_read_internal, respectively, and adding 'peek' parameters
4421 to them. The new ssl[23]_{read,peek} functions are calls to
4422 ssl[23]_read_internal with the 'peek' flag set appropriately.
4423 A 'peek' parameter has also been added to ssl3_read_bytes, which
4424 does the actual work for ssl3_read_internal.
4427 *) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
4428 the method-specific "init()" handler. Also clean up ex_data after
4429 calling the method-specific "finish()" handler. Previously, this was
4430 happening the other way round.
4433 *) Increase BN_CTX_NUM (the number of BIGNUMs in a BN_CTX) to 16.
4434 The previous value, 12, was not always sufficient for BN_mod_exp().
4437 *) Make sure that shared libraries get the internal name engine with
4438 the full version number and not just 0. This should mark the
4439 shared libraries as not backward compatible. Of course, this should
4440 be changed again when we can guarantee backward binary compatibility.
4443 *) Fix typo in get_cert_by_subject() in by_dir.c
4444 [Jean-Marc Desperrier <jean-marc.desperrier@certplus.com>]
4446 *) Rework the system to generate shared libraries:
4448 - Make note of the expected extension for the shared libraries and
4449 if there is a need for symbolic links from for example libcrypto.so.0
4450 to libcrypto.so.0.9.7. There is extended info in Configure for
4453 - Make as few rebuilds of the shared libraries as possible.
4455 - Still avoid linking the OpenSSL programs with the shared libraries.
4457 - When installing, install the shared libraries separately from the
4461 *) Fix SSL_CTX_set_read_ahead macro to actually use its argument.
4463 Copy SSL_CTX's read_ahead flag to SSL object directly in SSL_new
4464 and not in SSL_clear because the latter is also used by the
4465 accept/connect functions; previously, the settings made by
4466 SSL_set_read_ahead would be lost during the handshake.
4467 [Bodo Moeller; problems reported by Anders Gertz <gertz@epact.se>]
4469 *) Correct util/mkdef.pl to be selective about disabled algorithms.
4470 Previously, it would create entries for disableed algorithms no
4474 *) Added several new manual pages for SSL_* function.
4477 Changes between 0.9.5a and 0.9.6 [24 Sep 2000]
4479 *) In ssl23_get_client_hello, generate an error message when faced
4480 with an initial SSL 3.0/TLS record that is too small to contain the
4481 first two bytes of the ClientHello message, i.e. client_version.
4482 (Note that this is a pathologic case that probably has never happened
4483 in real life.) The previous approach was to use the version number
4484 from the record header as a substitute; but our protocol choice
4485 should not depend on that one because it is not authenticated
4486 by the Finished messages.
4489 *) More robust randomness gathering functions for Windows.
4490 [Jeffrey Altman <jaltman@columbia.edu>]
4492 *) For compatibility reasons if the flag X509_V_FLAG_ISSUER_CHECK is
4493 not set then we don't setup the error code for issuer check errors
4494 to avoid possibly overwriting other errors which the callback does
4495 handle. If an application does set the flag then we assume it knows
4496 what it is doing and can handle the new informational codes
4500 *) Fix for a nasty bug in ASN1_TYPE handling. ASN1_TYPE is used for
4501 a general "ANY" type, as such it should be able to decode anything
4502 including tagged types. However it didn't check the class so it would
4503 wrongly interpret tagged types in the same way as their universal
4504 counterpart and unknown types were just rejected. Changed so that the
4505 tagged and unknown types are handled in the same way as a SEQUENCE:
4506 that is the encoding is stored intact. There is also a new type
4507 "V_ASN1_OTHER" which is used when the class is not universal, in this
4508 case we have no idea what the actual type is so we just lump them all
4512 *) On VMS, stdout may very well lead to a file that is written to
4513 in a record-oriented fashion. That means that every write() will
4514 write a separate record, which will be read separately by the
4515 programs trying to read from it. This can be very confusing.
4517 The solution is to put a BIO filter in the way that will buffer
4518 text until a linefeed is reached, and then write everything a
4519 line at a time, so every record written will be an actual line,
4520 not chunks of lines and not (usually doesn't happen, but I've
4521 seen it once) several lines in one record. BIO_f_linebuffer() is
4524 Currently, it's a VMS-only method, because that's where it has
4525 been tested well enough.
4528 *) Remove 'optimized' squaring variant in BN_mod_mul_montgomery,
4529 it can return incorrect results.
4530 (Note: The buggy variant was not enabled in OpenSSL 0.9.5a,
4531 but it was in 0.9.6-beta[12].)
4534 *) Disable the check for content being present when verifying detached
4535 signatures in pk7_smime.c. Some versions of Netscape (wrongly)
4536 include zero length content when signing messages.
4539 *) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR
4540 BIO_ctrl (for BIO pairs).
4543 *) Add DSO method for VMS.
4546 *) Bug fix: Montgomery multiplication could produce results with the
4550 *) Add RPM specification openssl.spec and modify it to build three
4551 packages. The default package contains applications, application
4552 documentation and run-time libraries. The devel package contains
4553 include files, static libraries and function documentation. The
4554 doc package contains the contents of the doc directory. The original
4555 openssl.spec was provided by Damien Miller <djm@mindrot.org>.
4558 *) Add a large number of documentation files for many SSL routines.
4559 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
4561 *) Add a configuration entry for Sony News 4.
4562 [NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp>]
4564 *) Don't set the two most significant bits to one when generating a
4565 random number < q in the DSA library.
4568 *) New SSL API mode 'SSL_MODE_AUTO_RETRY'. This disables the default
4569 behaviour that SSL_read may result in SSL_ERROR_WANT_READ (even if
4570 the underlying transport is blocking) if a handshake took place.
4571 (The default behaviour is needed by applications such as s_client
4572 and s_server that use select() to determine when to use SSL_read;
4573 but for applications that know in advance when to expect data, it
4574 just makes things more complicated.)
4577 *) Add RAND_egd_bytes(), which gives control over the number of bytes read
4581 *) Add a few more EBCDIC conditionals that make `req' and `x509'
4582 work better on such systems.
4583 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
4585 *) Add two demo programs for PKCS12_parse() and PKCS12_create().
4586 Update PKCS12_parse() so it copies the friendlyName and the
4587 keyid to the certificates aux info.
4590 *) Fix bug in PKCS7_verify() which caused an infinite loop
4591 if there was more than one signature.
4592 [Sven Uszpelkat <su@celocom.de>]
4594 *) Major change in util/mkdef.pl to include extra information
4595 about each symbol, as well as presentig variables as well
4596 as functions. This change means that there's n more need
4597 to rebuild the .num files when some algorithms are excluded.
4600 *) Allow the verify time to be set by an application,
4601 rather than always using the current time.
4604 *) Phase 2 verify code reorganisation. The certificate
4605 verify code now looks up an issuer certificate by a
4606 number of criteria: subject name, authority key id
4607 and key usage. It also verifies self signed certificates
4608 by the same criteria. The main comparison function is
4609 X509_check_issued() which performs these checks.
4611 Lot of changes were necessary in order to support this
4612 without completely rewriting the lookup code.
4614 Authority and subject key identifier are now cached.
4616 The LHASH 'certs' is X509_STORE has now been replaced
4617 by a STACK_OF(X509_OBJECT). This is mainly because an
4618 LHASH can't store or retrieve multiple objects with
4619 the same hash value.
4621 As a result various functions (which were all internal
4622 use only) have changed to handle the new X509_STORE
4623 structure. This will break anything that messed round
4624 with X509_STORE internally.
4626 The functions X509_STORE_add_cert() now checks for an
4627 exact match, rather than just subject name.
4629 The X509_STORE API doesn't directly support the retrieval
4630 of multiple certificates matching a given criteria, however
4631 this can be worked round by performing a lookup first
4632 (which will fill the cache with candidate certificates)
4633 and then examining the cache for matches. This is probably
4634 the best we can do without throwing out X509_LOOKUP
4635 entirely (maybe later...).
4637 The X509_VERIFY_CTX structure has been enhanced considerably.
4639 All certificate lookup operations now go via a get_issuer()
4640 callback. Although this currently uses an X509_STORE it
4641 can be replaced by custom lookups. This is a simple way
4642 to bypass the X509_STORE hackery necessary to make this
4643 work and makes it possible to use more efficient techniques
4644 in future. A very simple version which uses a simple
4645 STACK for its trusted certificate store is also provided
4646 using X509_STORE_CTX_trusted_stack().
4648 The verify_cb() and verify() callbacks now have equivalents
4649 in the X509_STORE_CTX structure.
4651 X509_STORE_CTX also has a 'flags' field which can be used
4652 to customise the verify behaviour.
4655 *) Add new PKCS#7 signing option PKCS7_NOSMIMECAP which
4656 excludes S/MIME capabilities.
4659 *) When a certificate request is read in keep a copy of the
4660 original encoding of the signed data and use it when outputing
4661 again. Signatures then use the original encoding rather than
4662 a decoded, encoded version which may cause problems if the
4663 request is improperly encoded.
4666 *) For consistency with other BIO_puts implementations, call
4667 buffer_write(b, ...) directly in buffer_puts instead of calling
4670 In BIO_puts, increment b->num_write as in BIO_write.
4671 [Peter.Sylvester@EdelWeb.fr]
4673 *) Fix BN_mul_word for the case where the word is 0. (We have to use
4674 BN_zero, we may not return a BIGNUM with an array consisting of
4678 *) Avoid calling abort() from within the library when problems are
4679 detected, except if preprocessor symbols have been defined
4680 (such as REF_CHECK, BN_DEBUG etc.).
4683 *) New openssl application 'rsautl'. This utility can be
4684 used for low level RSA operations. DER public key
4685 BIO/fp routines also added.
4688 *) New Configure entry and patches for compiling on QNX 4.
4689 [Andreas Schneider <andreas@ds3.etech.fh-hamburg.de>]
4691 *) A demo state-machine implementation was sponsored by
4692 Nuron (http://www.nuron.com/) and is now available in
4693 demos/state_machine.
4696 *) New options added to the 'dgst' utility for signature
4697 generation and verification.
4700 *) Unrecognized PKCS#7 content types are now handled via a
4701 catch all ASN1_TYPE structure. This allows unsupported
4702 types to be stored as a "blob" and an application can
4703 encode and decode it manually.
4706 *) Fix various signed/unsigned issues to make a_strex.c
4708 [Oscar Jacobsson <oscar.jacobsson@celocom.com>]
4710 *) ASN1 fixes. i2d_ASN1_OBJECT was not returning the correct
4711 length if passed a buffer. ASN1_INTEGER_to_BN failed
4712 if passed a NULL BN and its argument was negative.
4713 [Steve Henson, pointed out by Sven Heiberg <sven@tartu.cyber.ee>]
4715 *) Modification to PKCS#7 encoding routines to output definite
4716 length encoding. Since currently the whole structures are in
4717 memory there's not real point in using indefinite length
4718 constructed encoding. However if OpenSSL is compiled with
4719 the flag PKCS7_INDEFINITE_ENCODING the old form is used.
4722 *) Added BIO_vprintf() and BIO_vsnprintf().
4725 *) Added more prefixes to parse for in the the strings written
4726 through a logging bio, to cover all the levels that are available
4727 through syslog. The prefixes are now:
4729 PANIC, EMERG, EMR => LOG_EMERG
4730 ALERT, ALR => LOG_ALERT
4731 CRIT, CRI => LOG_CRIT
4732 ERROR, ERR => LOG_ERR
4733 WARNING, WARN, WAR => LOG_WARNING
4734 NOTICE, NOTE, NOT => LOG_NOTICE
4735 INFO, INF => LOG_INFO
4736 DEBUG, DBG => LOG_DEBUG
4738 and as before, if none of those prefixes are present at the
4739 beginning of the string, LOG_ERR is chosen.
4741 On Win32, the LOG_* levels are mapped according to this:
4743 LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE
4744 LOG_WARNING => EVENTLOG_WARNING_TYPE
4745 LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE
4749 *) Made it possible to reconfigure with just the configuration
4750 argument "reconf" or "reconfigure". The command line arguments
4751 are stored in Makefile.ssl in the variable CONFIGURE_ARGS,
4752 and are retrieved from there when reconfiguring.
4756 [Assar Westerlund <assar@sics.se>, Richard Levitte]
4758 *) Add the arguments -CAfile and -CApath to the pkcs12 utility.
4761 *) The obj_dat.pl script was messing up the sorting of object
4762 names. The reason was that it compared the quoted version
4763 of strings as a result "OCSP" > "OCSP Signing" because
4764 " > SPACE. Changed script to store unquoted versions of
4765 names and add quotes on output. It was also omitting some
4766 names from the lookup table if they were given a default
4767 value (that is if SN is missing it is given the same
4768 value as LN and vice versa), these are now added on the
4769 grounds that if an object has a name we should be able to
4770 look it up. Finally added warning output when duplicate
4771 short or long names are found.
4774 *) Changes needed for Tandem NSK.
4775 [Scott Uroff <scott@xypro.com>]
4777 *) Fix SSL 2.0 rollback checking: Due to an off-by-one error in
4778 RSA_padding_check_SSLv23(), special padding was never detected
4779 and thus the SSL 3.0/TLS 1.0 countermeasure against protocol
4780 version rollback attacks was not effective.
4782 In s23_clnt.c, don't use special rollback-attack detection padding
4783 (RSA_SSLV23_PADDING) if SSL 2.0 is the only protocol enabled in the
4784 client; similarly, in s23_srvr.c, don't do the rollback check if
4785 SSL 2.0 is the only protocol enabled in the server.
4788 *) Make it possible to get hexdumps of unprintable data with 'openssl
4789 asn1parse'. By implication, the functions ASN1_parse_dump() and
4790 BIO_dump_indent() are added.
4793 *) New functions ASN1_STRING_print_ex() and X509_NAME_print_ex()
4794 these print out strings and name structures based on various
4795 flags including RFC2253 support and proper handling of
4796 multibyte characters. Added options to the 'x509' utility
4797 to allow the various flags to be set.
4800 *) Various fixes to use ASN1_TIME instead of ASN1_UTCTIME.
4801 Also change the functions X509_cmp_current_time() and
4802 X509_gmtime_adj() work with an ASN1_TIME structure,
4803 this will enable certificates using GeneralizedTime in validity
4804 dates to be checked.
4807 *) Make the NEG_PUBKEY_BUG code (which tolerates invalid
4808 negative public key encodings) on by default,
4809 NO_NEG_PUBKEY_BUG can be set to disable it.
4812 *) New function c2i_ASN1_OBJECT() which acts on ASN1_OBJECT
4813 content octets. An i2c_ASN1_OBJECT is unnecessary because
4814 the encoding can be trivially obtained from the structure.
4817 *) crypto/err.c locking bugfix: Use write locks (CRYPTO_w_[un]lock),
4818 not read locks (CRYPTO_r_[un]lock).
4821 *) A first attempt at creating official support for shared
4822 libraries through configuration. I've kept it so the
4823 default is static libraries only, and the OpenSSL programs
4824 are always statically linked for now, but there are
4825 preparations for dynamic linking in place.
4826 This has been tested on Linux and Tru64.
4829 *) Randomness polling function for Win9x, as described in:
4830 Peter Gutmann, Software Generation of Practically Strong
4834 *) Fix so PRNG is seeded in req if using an already existing
4838 *) New options to smime application. -inform and -outform
4839 allow alternative formats for the S/MIME message including
4840 PEM and DER. The -content option allows the content to be
4841 specified separately. This should allow things like Netscape
4842 form signing output easier to verify.
4845 *) Fix the ASN1 encoding of tags using the 'long form'.
4848 *) New ASN1 functions, i2c_* and c2i_* for INTEGER and BIT
4849 STRING types. These convert content octets to and from the
4850 underlying type. The actual tag and length octets are
4851 already assumed to have been read in and checked. These
4852 are needed because all other string types have virtually
4853 identical handling apart from the tag. By having versions
4854 of the ASN1 functions that just operate on content octets
4855 IMPLICIT tagging can be handled properly. It also allows
4856 the ASN1_ENUMERATED code to be cut down because ASN1_ENUMERATED
4857 and ASN1_INTEGER are identical apart from the tag.
4860 *) Change the handling of OID objects as follows:
4862 - New object identifiers are inserted in objects.txt, following
4863 the syntax given in objects.README.
4864 - objects.pl is used to process obj_mac.num and create a new
4866 - obj_dat.pl is used to create a new obj_dat.h, using the data in
4869 This is currently kind of a hack, and the perl code in objects.pl
4870 isn't very elegant, but it works as I intended. The simplest way
4871 to check that it worked correctly is to look in obj_dat.h and
4872 check the array nid_objs and make sure the objects haven't moved
4873 around (this is important!). Additions are OK, as well as
4874 consistent name changes.
4877 *) Add BSD-style MD5-based passwords to 'openssl passwd' (option '-1').
4880 *) Addition of the command line parameter '-rand file' to 'openssl req'.
4881 The given file adds to whatever has already been seeded into the
4882 random pool through the RANDFILE configuration file option or
4883 environment variable, or the default random state file.
4886 *) mkstack.pl now sorts each macro group into lexical order.
4887 Previously the output order depended on the order the files
4888 appeared in the directory, resulting in needless rewriting
4892 *) Patches to make OpenSSL compile under Win32 again. Mostly
4893 work arounds for the VC++ problem that it treats func() as
4894 func(void). Also stripped out the parts of mkdef.pl that
4895 added extra typesafe functions: these no longer exist.
4898 *) Reorganisation of the stack code. The macros are now all
4899 collected in safestack.h . Each macro is defined in terms of
4900 a "stack macro" of the form SKM_<name>(type, a, b). The
4901 DEBUG_SAFESTACK is now handled in terms of function casts,
4902 this has the advantage of retaining type safety without the
4903 use of additional functions. If DEBUG_SAFESTACK is not defined
4904 then the non typesafe macros are used instead. Also modified the
4905 mkstack.pl script to handle the new form. Needs testing to see
4906 if which (if any) compilers it chokes and maybe make DEBUG_SAFESTACK
4907 the default if no major problems. Similar behaviour for ASN1_SET_OF
4908 and PKCS12_STACK_OF.
4911 *) When some versions of IIS use the 'NET' form of private key the
4912 key derivation algorithm is different. Normally MD5(password) is
4913 used as a 128 bit RC4 key. In the modified case
4914 MD5(MD5(password) + "SGCKEYSALT") is used insted. Added some
4915 new functions i2d_RSA_NET(), d2i_RSA_NET() etc which are the same
4916 as the old Netscape_RSA functions except they have an additional
4917 'sgckey' parameter which uses the modified algorithm. Also added
4918 an -sgckey command line option to the rsa utility. Thanks to
4919 Adrian Peck <bertie@ncipher.com> for posting details of the modified
4920 algorithm to openssl-dev.
4923 *) The evp_local.h macros were using 'c.##kname' which resulted in
4924 invalid expansion on some systems (SCO 5.0.5 for example).
4925 Corrected to 'c.kname'.
4926 [Phillip Porch <root@theporch.com>]
4928 *) New X509_get1_email() and X509_REQ_get1_email() functions that return
4929 a STACK of email addresses from a certificate or request, these look
4930 in the subject name and the subject alternative name extensions and
4931 omit any duplicate addresses.
4934 *) Re-implement BN_mod_exp2_mont using independent (and larger) windows.
4935 This makes DSA verification about 2 % faster.
4938 *) Increase maximum window size in BN_mod_exp_... to 6 bits instead of 5
4939 (meaning that now 2^5 values will be precomputed, which is only 4 KB
4940 plus overhead for 1024 bit moduli).
4941 This makes exponentiations about 0.5 % faster for 1024 bit
4942 exponents (as measured by "openssl speed rsa2048").
4945 *) Rename memory handling macros to avoid conflicts with other
4947 Malloc => OPENSSL_malloc
4948 Malloc_locked => OPENSSL_malloc_locked
4949 Realloc => OPENSSL_realloc
4950 Free => OPENSSL_free
4953 *) New function BN_mod_exp_mont_word for small bases (roughly 15%
4954 faster than BN_mod_exp_mont, i.e. 7% for a full DH exchange).
4957 *) CygWin32 support.
4958 [John Jarvie <jjarvie@newsguy.com>]
4960 *) The type-safe stack code has been rejigged. It is now only compiled
4961 in when OpenSSL is configured with the DEBUG_SAFESTACK option and
4962 by default all type-specific stack functions are "#define"d back to
4963 standard stack functions. This results in more streamlined output
4964 but retains the type-safety checking possibilities of the original
4968 *) The STACK code has been cleaned up, and certain type declarations
4969 that didn't make a lot of sense have been brought in line. This has
4970 also involved a cleanup of sorts in safestack.h to more correctly
4971 map type-safe stack functions onto their plain stack counterparts.
4972 This work has also resulted in a variety of "const"ifications of
4973 lots of the code, especially "_cmp" operations which should normally
4974 be prototyped with "const" parameters anyway.
4977 *) When generating bytes for the first time in md_rand.c, 'stir the pool'
4978 by seeding with STATE_SIZE dummy bytes (with zero entropy count).
4979 (The PRNG state consists of two parts, the large pool 'state' and 'md',
4980 where all of 'md' is used each time the PRNG is used, but 'state'
4981 is used only indexed by a cyclic counter. As entropy may not be
4982 well distributed from the beginning, 'md' is important as a
4983 chaining variable. However, the output function chains only half
4984 of 'md', i.e. 80 bits. ssleay_rand_add, on the other hand, chains
4985 all of 'md', and seeding with STATE_SIZE dummy bytes will result
4986 in all of 'state' being rewritten, with the new values depending
4987 on virtually all of 'md'. This overcomes the 80 bit limitation.)
4990 *) In ssl/s2_clnt.c and ssl/s3_clnt.c, call ERR_clear_error() when
4991 the handshake is continued after ssl_verify_cert_chain();
4992 otherwise, if SSL_VERIFY_NONE is set, remaining error codes
4993 can lead to 'unexplainable' connection aborts later.
4994 [Bodo Moeller; problem tracked down by Lutz Jaenicke]
4996 *) Major EVP API cipher revision.
4997 Add hooks for extra EVP features. This allows various cipher
4998 parameters to be set in the EVP interface. Support added for variable
4999 key length ciphers via the EVP_CIPHER_CTX_set_key_length() function and
5000 setting of RC2 and RC5 parameters.
5002 Modify EVP_OpenInit() and EVP_SealInit() to cope with variable key length
5005 Remove lots of duplicated code from the EVP library. For example *every*
5006 cipher init() function handles the 'iv' in the same way according to the
5007 cipher mode. They also all do nothing if the 'key' parameter is NULL and
5008 for CFB and OFB modes they zero ctx->num.
5010 New functionality allows removal of S/MIME code RC2 hack.
5012 Most of the routines have the same form and so can be declared in terms
5015 By shifting this to the top level EVP_CipherInit() it can be removed from
5016 all individual ciphers. If the cipher wants to handle IVs or keys
5017 differently it can set the EVP_CIPH_CUSTOM_IV or EVP_CIPH_ALWAYS_CALL_INIT
5020 Change lots of functions like EVP_EncryptUpdate() to now return a
5021 value: although software versions of the algorithms cannot fail
5022 any installed hardware versions can.
5025 *) Implement SSL_OP_TLS_ROLLBACK_BUG: In ssl3_get_client_key_exchange, if
5026 this option is set, tolerate broken clients that send the negotiated
5027 protocol version number instead of the requested protocol version
5031 *) Call dh_tmp_cb (set by ..._TMP_DH_CB) with correct 'is_export' flag;
5032 i.e. non-zero for export ciphersuites, zero otherwise.
5033 Previous versions had this flag inverted, inconsistent with
5034 rsa_tmp_cb (..._TMP_RSA_CB).
5035 [Bodo Moeller; problem reported by Amit Chopra]
5037 *) Add missing DSA library text string. Work around for some IIS
5038 key files with invalid SEQUENCE encoding.
5041 *) Add a document (doc/standards.txt) that list all kinds of standards
5042 and so on that are implemented in OpenSSL.
5045 *) Enhance c_rehash script. Old version would mishandle certificates
5046 with the same subject name hash and wouldn't handle CRLs at all.
5047 Added -fingerprint option to crl utility, to support new c_rehash
5051 *) Eliminate non-ANSI declarations in crypto.h and stack.h.
5054 *) Fix for SSL server purpose checking. Server checking was
5055 rejecting certificates which had extended key usage present
5056 but no ssl client purpose.
5057 [Steve Henson, reported by Rene Grosser <grosser@hisolutions.com>]
5059 *) Make PKCS#12 code work with no password. The PKCS#12 spec
5060 is a little unclear about how a blank password is handled.
5061 Since the password in encoded as a BMPString with terminating
5062 double NULL a zero length password would end up as just the
5063 double NULL. However no password at all is different and is
5064 handled differently in the PKCS#12 key generation code. NS
5065 treats a blank password as zero length. MSIE treats it as no
5066 password on export: but it will try both on import. We now do
5067 the same: PKCS12_parse() tries zero length and no password if
5068 the password is set to "" or NULL (NULL is now a valid password:
5069 it wasn't before) as does the pkcs12 application.
5072 *) Bugfixes in apps/x509.c: Avoid a memory leak; and don't use
5073 perror when PEM_read_bio_X509_REQ fails, the error message must
5074 be obtained from the error queue.
5077 *) Avoid 'thread_hash' memory leak in crypto/err/err.c by freeing
5078 it in ERR_remove_state if appropriate, and change ERR_get_state
5079 accordingly to avoid race conditions (this is necessary because
5080 thread_hash is no longer constant once set).
5083 *) Bugfix for linux-elf makefile.one.
5086 *) RSA_get_default_method() will now cause a default
5087 RSA_METHOD to be chosen if one doesn't exist already.
5088 Previously this was only set during a call to RSA_new()
5089 or RSA_new_method(NULL) meaning it was possible for
5090 RSA_get_default_method() to return NULL.
5093 *) Added native name translation to the existing DSO code
5094 that will convert (if the flag to do so is set) filenames
5095 that are sufficiently small and have no path information
5096 into a canonical native form. Eg. "blah" converted to
5097 "libblah.so" or "blah.dll" etc.
5100 *) New function ERR_error_string_n(e, buf, len) which is like
5101 ERR_error_string(e, buf), but writes at most 'len' bytes
5102 including the 0 terminator. For ERR_error_string_n, 'buf'
5104 [Damien Miller <djm@mindrot.org>, Bodo Moeller]
5106 *) CONF library reworked to become more general. A new CONF
5107 configuration file reader "class" is implemented as well as a
5108 new functions (NCONF_*, for "New CONF") to handle it. The now
5109 old CONF_* functions are still there, but are reimplemented to
5110 work in terms of the new functions. Also, a set of functions
5111 to handle the internal storage of the configuration data is
5112 provided to make it easier to write new configuration file
5113 reader "classes" (I can definitely see something reading a
5114 configuration file in XML format, for example), called _CONF_*,
5115 or "the configuration storage API"...
5117 The new configuration file reading functions are:
5119 NCONF_new, NCONF_free, NCONF_load, NCONF_load_fp, NCONF_load_bio,
5120 NCONF_get_section, NCONF_get_string, NCONF_get_numbre
5122 NCONF_default, NCONF_WIN32
5124 NCONF_dump_fp, NCONF_dump_bio
5126 NCONF_default and NCONF_WIN32 are method (or "class") choosers,
5127 NCONF_new creates a new CONF object. This works in the same way
5128 as other interfaces in OpenSSL, like the BIO interface.
5129 NCONF_dump_* dump the internal storage of the configuration file,
5130 which is useful for debugging. All other functions take the same
5131 arguments as the old CONF_* functions wth the exception of the
5132 first that must be a `CONF *' instead of a `LHASH *'.
5134 To make it easer to use the new classes with the old CONF_* functions,
5135 the function CONF_set_default_method is provided.
5138 *) Add '-tls1' option to 'openssl ciphers', which was already
5139 mentioned in the documentation but had not been implemented.
5140 (This option is not yet really useful because even the additional
5141 experimental TLS 1.0 ciphers are currently treated as SSL 3.0 ciphers.)
5144 *) Initial DSO code added into libcrypto for letting OpenSSL (and
5145 OpenSSL-based applications) load shared libraries and bind to
5146 them in a portable way.
5147 [Geoff Thorpe, with contributions from Richard Levitte]
5149 Changes between 0.9.5 and 0.9.5a [1 Apr 2000]
5151 *) Make sure _lrotl and _lrotr are only used with MSVC.
5153 *) Use lock CRYPTO_LOCK_RAND correctly in ssleay_rand_status
5154 (the default implementation of RAND_status).
5156 *) Rename openssl x509 option '-crlext', which was added in 0.9.5,
5157 to '-clrext' (= clear extensions), as intended and documented.
5158 [Bodo Moeller; inconsistency pointed out by Michael Attili
5161 *) Fix for HMAC. It wasn't zeroing the rest of the block if the key length
5162 was larger than the MD block size.
5163 [Steve Henson, pointed out by Yost William <YostW@tce.com>]
5165 *) Modernise PKCS12_parse() so it uses STACK_OF(X509) for its ca argument
5166 fix a leak when the ca argument was passed as NULL. Stop X509_PUBKEY_set()
5167 using the passed key: if the passed key was a private key the result
5168 of X509_print(), for example, would be to print out all the private key
5172 *) des_quad_cksum() byte order bug fix.
5173 [Ulf Möller, using the problem description in krb4-0.9.7, where
5174 the solution is attributed to Derrick J Brashear <shadow@DEMENTIA.ORG>]
5176 *) Fix so V_ASN1_APP_CHOOSE works again: however its use is strongly
5178 [Steve Henson, pointed out by Brian Korver <briank@cs.stanford.edu>]
5180 *) For easily testing in shell scripts whether some command
5181 'openssl XXX' exists, the new pseudo-command 'openssl no-XXX'
5182 returns with exit code 0 iff no command of the given name is available.
5183 'no-XXX' is printed in this case, 'XXX' otherwise. In both cases,
5184 the output goes to stdout and nothing is printed to stderr.
5185 Additional arguments are always ignored.
5187 Since for each cipher there is a command of the same name,
5188 the 'no-cipher' compilation switches can be tested this way.
5190 ('openssl no-XXX' is not able to detect pseudo-commands such
5191 as 'quit', 'list-XXX-commands', or 'no-XXX' itself.)
5194 *) Update test suite so that 'make test' succeeds in 'no-rsa' configuration.
5197 *) For SSL_[CTX_]set_tmp_dh, don't create a DH key if SSL_OP_SINGLE_DH_USE
5198 is set; it will be thrown away anyway because each handshake creates
5200 ssl_cert_dup, which is used by SSL_new, now copies DH keys in addition
5201 to parameters -- in previous versions (since OpenSSL 0.9.3) the
5202 'default key' from SSL_CTX_set_tmp_dh would always be lost, meanining
5203 you effectivly got SSL_OP_SINGLE_DH_USE when using this macro.
5206 *) New s_client option -ign_eof: EOF at stdin is ignored, and
5207 'Q' and 'R' lose their special meanings (quit/renegotiate).
5208 This is part of what -quiet does; unlike -quiet, -ign_eof
5209 does not suppress any output.
5212 *) Add compatibility options to the purpose and trust code. The
5213 purpose X509_PURPOSE_ANY is "any purpose" which automatically
5214 accepts a certificate or CA, this was the previous behaviour,
5215 with all the associated security issues.
5217 X509_TRUST_COMPAT is the old trust behaviour: only and
5218 automatically trust self signed roots in certificate store. A
5219 new trust setting X509_TRUST_DEFAULT is used to specify that
5220 a purpose has no associated trust setting and it should instead
5221 use the value in the default purpose.
5224 *) Fix the PKCS#8 DSA private key code so it decodes keys again
5225 and fix a memory leak.
5228 *) In util/mkerr.pl (which implements 'make errors'), preserve
5229 reason strings from the previous version of the .c file, as
5230 the default to have only downcase letters (and digits) in
5231 automatically generated reasons codes is not always appropriate.
5234 *) In ERR_load_ERR_strings(), build an ERR_LIB_SYS error reason table
5235 using strerror. Previously, ERR_reason_error_string() returned
5236 library names as reason strings for SYSerr; but SYSerr is a special
5237 case where small numbers are errno values, not library numbers.
5240 *) Add '-dsaparam' option to 'openssl dhparam' application. This
5241 converts DSA parameters into DH parameters. (When creating parameters,
5242 DSA_generate_parameters is used.)
5245 *) Include 'length' (recommended exponent length) in C code generated
5246 by 'openssl dhparam -C'.
5249 *) The second argument to set_label in perlasm was already being used
5250 so couldn't be used as a "file scope" flag. Moved to third argument
5254 *) In PEM_ASN1_write_bio and some other functions, use RAND_pseudo_bytes
5255 instead of RAND_bytes for encryption IVs and salts.
5258 *) Include RAND_status() into RAND_METHOD instead of implementing
5259 it only for md_rand.c Otherwise replacing the PRNG by calling
5260 RAND_set_rand_method would be impossible.
5263 *) Don't let DSA_generate_key() enter an infinite loop if the random
5264 number generation fails.
5267 *) New 'rand' application for creating pseudo-random output.
5270 *) Added configuration support for Linux/IA64
5271 [Rolf Haberrecker <rolf@suse.de>]
5273 *) Assembler module support for Mingw32.
5276 *) Shared library support for HPUX (in shlib/).
5277 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE> and Anonymous]
5279 *) Shared library support for Solaris gcc.
5280 [Lutz Behnke <behnke@trustcenter.de>]
5282 Changes between 0.9.4 and 0.9.5 [28 Feb 2000]
5284 *) PKCS7_encrypt() was adding text MIME headers twice because they
5285 were added manually and by SMIME_crlf_copy().
5288 *) In bntest.c don't call BN_rand with zero bits argument.
5289 [Steve Henson, pointed out by Andrew W. Gray <agray@iconsinc.com>]
5291 *) BN_mul bugfix: In bn_mul_part_recursion() only the a>a[n] && b>b[n]
5292 case was implemented. This caused BN_div_recp() to fail occasionally.
5295 *) Add an optional second argument to the set_label() in the perl
5296 assembly language builder. If this argument exists and is set
5297 to 1 it signals that the assembler should use a symbol whose
5298 scope is the entire file, not just the current function. This
5299 is needed with MASM which uses the format label:: for this scope.
5300 [Steve Henson, pointed out by Peter Runestig <peter@runestig.com>]
5302 *) Change the ASN1 types so they are typedefs by default. Before
5303 almost all types were #define'd to ASN1_STRING which was causing
5304 STACK_OF() problems: you couldn't declare STACK_OF(ASN1_UTF8STRING)
5308 *) Change names of new functions to the new get1/get0 naming
5309 convention: After 'get1', the caller owns a reference count
5310 and has to call ..._free; 'get0' returns a pointer to some
5311 data structure without incrementing reference counters.
5312 (Some of the existing 'get' functions increment a reference
5313 counter, some don't.)
5314 Similarly, 'set1' and 'add1' functions increase reference
5315 counters or duplicate objects.
5318 *) Allow for the possibility of temp RSA key generation failure:
5319 the code used to assume it always worked and crashed on failure.
5322 *) Fix potential buffer overrun problem in BIO_printf().
5323 [Ulf Möller, using public domain code by Patrick Powell; problem
5324 pointed out by David Sacerdote <das33@cornell.edu>]
5326 *) Support EGD <http://www.lothar.com/tech/crypto/>. New functions
5327 RAND_egd() and RAND_status(). In the command line application,
5328 the EGD socket can be specified like a seed file using RANDFILE
5332 *) Allow the string CERTIFICATE to be tolerated in PKCS#7 structures.
5333 Some CAs (e.g. Verisign) distribute certificates in this form.
5336 *) Remove the SSL_ALLOW_ADH compile option and set the default cipher
5337 list to exclude them. This means that no special compilation option
5338 is needed to use anonymous DH: it just needs to be included in the
5342 *) Change the EVP_MD_CTX_type macro so its meaning consistent with
5343 EVP_MD_type. The old functionality is available in a new macro called
5344 EVP_MD_md(). Change code that uses it and update docs.
5347 *) ..._ctrl functions now have corresponding ..._callback_ctrl functions
5348 where the 'void *' argument is replaced by a function pointer argument.
5349 Previously 'void *' was abused to point to functions, which works on
5350 many platforms, but is not correct. As these functions are usually
5351 called by macros defined in OpenSSL header files, most source code
5352 should work without changes.
5355 *) <openssl/opensslconf.h> (which is created by Configure) now contains
5356 sections with information on -D... compiler switches used for
5357 compiling the library so that applications can see them. To enable
5358 one of these sections, a pre-processor symbol OPENSSL_..._DEFINES
5359 must be defined. E.g.,
5360 #define OPENSSL_ALGORITHM_DEFINES
5361 #include <openssl/opensslconf.h>
5362 defines all pertinent NO_<algo> symbols, such as NO_IDEA, NO_RSA, etc.
5363 [Richard Levitte, Ulf and Bodo Möller]
5365 *) Bugfix: Tolerate fragmentation and interleaving in the SSL 3/TLS
5369 *) Change the 'other' type in certificate aux info to a STACK_OF
5370 X509_ALGOR. Although not an AlgorithmIdentifier as such it has
5371 the required ASN1 format: arbitrary types determined by an OID.
5374 *) Add some PEM_write_X509_REQ_NEW() functions and a command line
5375 argument to 'req'. This is not because the function is newer or
5376 better than others it just uses the work 'NEW' in the certificate
5377 request header lines. Some software needs this.
5380 *) Reorganise password command line arguments: now passwords can be
5381 obtained from various sources. Delete the PEM_cb function and make
5382 it the default behaviour: i.e. if the callback is NULL and the
5383 usrdata argument is not NULL interpret it as a null terminated pass
5384 phrase. If usrdata and the callback are NULL then the pass phrase
5385 is prompted for as usual.
5388 *) Add support for the Compaq Atalla crypto accelerator. If it is installed,
5389 the support is automatically enabled. The resulting binaries will
5390 autodetect the card and use it if present.
5391 [Ben Laurie and Compaq Inc.]
5393 *) Work around for Netscape hang bug. This sends certificate request
5394 and server done in one record. Since this is perfectly legal in the
5395 SSL/TLS protocol it isn't a "bug" option and is on by default. See
5396 the bugs/SSLv3 entry for more info.
5399 *) HP-UX tune-up: new unified configs, HP C compiler bug workaround.
5402 *) Add -rand argument to smime and pkcs12 applications and read/write
5406 *) New 'passwd' tool for crypt(3) and apr1 password hashes.
5409 *) Add command line password options to the remaining applications.
5412 *) Bug fix for BN_div_recp() for numerators with an even number of
5416 *) More tests in bntest.c, and changed test_bn output.
5419 *) ./config recognizes MacOS X now.
5422 *) Bug fix for BN_div() when the first words of num and divsor are
5423 equal (it gave wrong results if (rem=(n1-q*d0)&BN_MASK2) < d0).
5426 *) Add support for various broken PKCS#8 formats, and command line
5427 options to produce them.
5430 *) New functions BN_CTX_start(), BN_CTX_get() and BT_CTX_end() to
5431 get temporary BIGNUMs from a BN_CTX.
5434 *) Correct return values in BN_mod_exp_mont() and BN_mod_exp2_mont()
5438 *) Change the SSLeay_add_all_*() functions to OpenSSL_add_all_*() and
5439 include a #define from the old name to the new. The original intent
5440 was that statically linked binaries could for example just call
5441 SSLeay_add_all_ciphers() to just add ciphers to the table and not
5442 link with digests. This never worked becayse SSLeay_add_all_digests()
5443 and SSLeay_add_all_ciphers() were in the same source file so calling
5444 one would link with the other. They are now in separate source files.
5447 *) Add a new -notext option to 'ca' and a -pubkey option to 'spkac'.
5450 *) Use a less unusual form of the Miller-Rabin primality test (it used
5451 a binary algorithm for exponentiation integrated into the Miller-Rabin
5452 loop, our standard modexp algorithms are faster).
5455 *) Support for the EBCDIC character set completed.
5456 [Martin Kraemer <Martin.Kraemer@Mch.SNI.De>]
5458 *) Source code cleanups: use const where appropriate, eliminate casts,
5459 use void * instead of char * in lhash.
5462 *) Bugfix: ssl3_send_server_key_exchange was not restartable
5463 (the state was not changed to SSL3_ST_SW_KEY_EXCH_B, and because of
5464 this the server could overwrite ephemeral keys that the client
5468 *) Turn DSA_is_prime into a macro that calls BN_is_prime,
5469 using 50 iterations of the Rabin-Miller test.
5471 DSA_generate_parameters now uses BN_is_prime_fasttest (with 50
5472 iterations of the Rabin-Miller test as required by the appendix
5473 to FIPS PUB 186[-1]) instead of DSA_is_prime.
5474 As BN_is_prime_fasttest includes trial division, DSA parameter
5475 generation becomes much faster.
5477 This implies a change for the callback functions in DSA_is_prime
5478 and DSA_generate_parameters: The callback function is called once
5479 for each positive witness in the Rabin-Miller test, not just
5480 occasionally in the inner loop; and the parameters to the
5481 callback function now provide an iteration count for the outer
5482 loop rather than for the current invocation of the inner loop.
5483 DSA_generate_parameters additionally can call the callback
5484 function with an 'iteration count' of -1, meaning that a
5485 candidate has passed the trial division test (when q is generated
5486 from an application-provided seed, trial division is skipped).
5489 *) New function BN_is_prime_fasttest that optionally does trial
5490 division before starting the Rabin-Miller test and has
5491 an additional BN_CTX * argument (whereas BN_is_prime always
5492 has to allocate at least one BN_CTX).
5493 'callback(1, -1, cb_arg)' is called when a number has passed the
5494 trial division stage.
5497 *) Fix for bug in CRL encoding. The validity dates weren't being handled
5501 *) New -pkcs12 option to CA.pl script to write out a PKCS#12 file.
5504 *) New function BN_pseudo_rand().
5507 *) Clean up BN_mod_mul_montgomery(): replace the broken (and unreadable)
5508 bignum version of BN_from_montgomery() with the working code from
5509 SSLeay 0.9.0 (the word based version is faster anyway), and clean up
5513 *) Avoid a race condition in s2_clnt.c (function get_server_hello) that
5514 made it impossible to use the same SSL_SESSION data structure in
5515 SSL2 clients in multiple threads.
5518 *) The return value of RAND_load_file() no longer counts bytes obtained
5519 by stat(). RAND_load_file(..., -1) is new and uses the complete file
5520 to seed the PRNG (previously an explicit byte count was required).
5521 [Ulf Möller, Bodo Möller]
5523 *) Clean up CRYPTO_EX_DATA functions, some of these didn't have prototypes
5524 used (char *) instead of (void *) and had casts all over the place.
5527 *) Make BN_generate_prime() return NULL on error if ret!=NULL.
5530 *) Retain source code compatibility for BN_prime_checks macro:
5531 BN_is_prime(..., BN_prime_checks, ...) now uses
5532 BN_prime_checks_for_size to determine the appropriate number of
5533 Rabin-Miller iterations.
5536 *) Diffie-Hellman uses "safe" primes: DH_check() return code renamed to
5537 DH_CHECK_P_NOT_SAFE_PRIME.
5538 (Check if this is true? OpenPGP calls them "strong".)
5541 *) Merge the functionality of "dh" and "gendh" programs into a new program
5542 "dhparam". The old programs are retained for now but will handle DH keys
5543 (instead of parameters) in future.
5546 *) Make the ciphers, s_server and s_client programs check the return values
5547 when a new cipher list is set.
5550 *) Enhance the SSL/TLS cipher mechanism to correctly handle the TLS 56bit
5551 ciphers. Before when the 56bit ciphers were enabled the sorting was
5554 The syntax for the cipher sorting has been extended to support sorting by
5555 cipher-strength (using the strength_bits hard coded in the tables).
5556 The new command is "@STRENGTH" (see also doc/apps/ciphers.pod).
5558 Fix a bug in the cipher-command parser: when supplying a cipher command
5559 string with an "undefined" symbol (neither command nor alphanumeric
5560 [A-Za-z0-9], ssl_set_cipher_list used to hang in an endless loop. Now
5561 an error is flagged.
5563 Due to the strength-sorting extension, the code of the
5564 ssl_create_cipher_list() function was completely rearranged. I hope that
5565 the readability was also increased :-)
5566 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
5568 *) Minor change to 'x509' utility. The -CAcreateserial option now uses 1
5569 for the first serial number and places 2 in the serial number file. This
5570 avoids problems when the root CA is created with serial number zero and
5571 the first user certificate has the same issuer name and serial number
5575 *) Fixes to X509_ATTRIBUTE utilities, change the 'req' program so it uses
5576 the new code. Add documentation for this stuff.
5579 *) Changes to X509_ATTRIBUTE utilities. These have been renamed from
5580 X509_*() to X509at_*() on the grounds that they don't handle X509
5581 structures and behave in an analagous way to the X509v3 functions:
5582 they shouldn't be called directly but wrapper functions should be used
5585 So we also now have some wrapper functions that call the X509at functions
5586 when passed certificate requests. (TO DO: similar things can be done with
5587 PKCS#7 signed and unsigned attributes, PKCS#12 attributes and a few other
5588 things. Some of these need some d2i or i2d and print functionality
5589 because they handle more complex structures.)
5592 *) Add missing #ifndefs that caused missing symbols when building libssl
5593 as a shared library without RSA. Use #ifndef NO_SSL2 instead of
5594 NO_RSA in ssl/s2*.c.
5595 [Kris Kennaway <kris@hub.freebsd.org>, modified by Ulf Möller]
5597 *) Precautions against using the PRNG uninitialized: RAND_bytes() now
5598 has a return value which indicates the quality of the random data
5599 (1 = ok, 0 = not seeded). Also an error is recorded on the thread's
5600 error queue. New function RAND_pseudo_bytes() generates output that is
5601 guaranteed to be unique but not unpredictable. RAND_add is like
5602 RAND_seed, but takes an extra argument for an entropy estimate
5603 (RAND_seed always assumes full entropy).
5606 *) Do more iterations of Rabin-Miller probable prime test (specifically,
5607 3 for 1024-bit primes, 6 for 512-bit primes, 12 for 256-bit primes
5608 instead of only 2 for all lengths; see BN_prime_checks_for_size definition
5609 in crypto/bn/bn_prime.c for the complete table). This guarantees a
5610 false-positive rate of at most 2^-80 for random input.
5613 *) Rewrite ssl3_read_n (ssl/s3_pkt.c) avoiding a couple of bugs.
5616 *) New function X509_CTX_rget_chain() (renamed to X509_CTX_get1_chain
5617 in the 0.9.5 release), this returns the chain
5618 from an X509_CTX structure with a dup of the stack and all
5619 the X509 reference counts upped: so the stack will exist
5620 after X509_CTX_cleanup() has been called. Modify pkcs12.c
5623 Also make SSL_SESSION_print() print out the verify return
5627 *) Add manpage for the pkcs12 command. Also change the default
5628 behaviour so MAC iteration counts are used unless the new
5629 -nomaciter option is used. This improves file security and
5630 only older versions of MSIE (4.0 for example) need it.
5633 *) Honor the no-xxx Configure options when creating .DEF files.
5636 *) Add PKCS#10 attributes to field table: challengePassword,
5637 unstructuredName and unstructuredAddress. These are taken from
5638 draft PKCS#9 v2.0 but are compatible with v1.2 provided no
5639 international characters are used.
5641 More changes to X509_ATTRIBUTE code: allow the setting of types
5642 based on strings. Remove the 'loc' parameter when adding
5643 attributes because these will be a SET OF encoding which is sorted
5647 *) Initial changes to the 'req' utility to allow request generation
5648 automation. This will allow an application to just generate a template
5649 file containing all the field values and have req construct the
5652 Initial support for X509_ATTRIBUTE handling. Stacks of these are
5653 used all over the place including certificate requests and PKCS#7
5654 structures. They are currently handled manually where necessary with
5655 some primitive wrappers for PKCS#7. The new functions behave in a
5656 manner analogous to the X509 extension functions: they allow
5657 attributes to be looked up by NID and added.
5659 Later something similar to the X509V3 code would be desirable to
5660 automatically handle the encoding, decoding and printing of the
5661 more complex types. The string types like challengePassword can
5662 be handled by the string table functions.
5664 Also modified the multi byte string table handling. Now there is
5665 a 'global mask' which masks out certain types. The table itself
5666 can use the flag STABLE_NO_MASK to ignore the mask setting: this
5667 is useful when for example there is only one permissible type
5668 (as in countryName) and using the mask might result in no valid
5672 *) Clean up 'Finished' handling, and add functions SSL_get_finished and
5673 SSL_get_peer_finished to allow applications to obtain the latest
5674 Finished messages sent to the peer or expected from the peer,
5675 respectively. (SSL_get_peer_finished is usually the Finished message
5676 actually received from the peer, otherwise the protocol will be aborted.)
5678 As the Finished message are message digests of the complete handshake
5679 (with a total of 192 bits for TLS 1.0 and more for SSL 3.0), they can
5680 be used for external authentication procedures when the authentication
5681 provided by SSL/TLS is not desired or is not enough.
5684 *) Enhanced support for Alpha Linux is added. Now ./config checks if
5685 the host supports BWX extension and if Compaq C is present on the
5686 $PATH. Just exploiting of the BWX extension results in 20-30%
5687 performance kick for some algorithms, e.g. DES and RC4 to mention
5688 a couple. Compaq C in turn generates ~20% faster code for MD5 and
5692 *) Add support for MS "fast SGC". This is arguably a violation of the
5693 SSL3/TLS protocol. Netscape SGC does two handshakes: the first with
5694 weak crypto and after checking the certificate is SGC a second one
5695 with strong crypto. MS SGC stops the first handshake after receiving
5696 the server certificate message and sends a second client hello. Since
5697 a server will typically do all the time consuming operations before
5698 expecting any further messages from the client (server key exchange
5699 is the most expensive) there is little difference between the two.
5701 To get OpenSSL to support MS SGC we have to permit a second client
5702 hello message after we have sent server done. In addition we have to
5703 reset the MAC if we do get this second client hello.
5706 *) Add a function 'd2i_AutoPrivateKey()' this will automatically decide
5707 if a DER encoded private key is RSA or DSA traditional format. Changed
5708 d2i_PrivateKey_bio() to use it. This is only needed for the "traditional"
5709 format DER encoded private key. Newer code should use PKCS#8 format which
5710 has the key type encoded in the ASN1 structure. Added DER private key
5711 support to pkcs8 application.
5714 *) SSL 3/TLS 1 servers now don't request certificates when an anonymous
5715 ciphersuites has been selected (as required by the SSL 3/TLS 1
5716 specifications). Exception: When SSL_VERIFY_FAIL_IF_NO_PEER_CERT
5717 is set, we interpret this as a request to violate the specification
5718 (the worst that can happen is a handshake failure, and 'correct'
5719 behaviour would result in a handshake failure anyway).
5722 *) In SSL_CTX_add_session, take into account that there might be multiple
5723 SSL_SESSION structures with the same session ID (e.g. when two threads
5724 concurrently obtain them from an external cache).
5725 The internal cache can handle only one SSL_SESSION with a given ID,
5726 so if there's a conflict, we now throw out the old one to achieve
5730 *) Add OIDs for idea and blowfish in CBC mode. This will allow both
5731 to be used in PKCS#5 v2.0 and S/MIME. Also add checking to
5732 some routines that use cipher OIDs: some ciphers do not have OIDs
5733 defined and so they cannot be used for S/MIME and PKCS#5 v2.0 for
5737 *) Simplify the trust setting structure and code. Now we just have
5738 two sequences of OIDs for trusted and rejected settings. These will
5739 typically have values the same as the extended key usage extension
5740 and any application specific purposes.
5742 The trust checking code now has a default behaviour: it will just
5743 check for an object with the same NID as the passed id. Functions can
5744 be provided to override either the default behaviour or the behaviour
5745 for a given id. SSL client, server and email already have functions
5746 in place for compatibility: they check the NID and also return "trusted"
5747 if the certificate is self signed.
5750 *) Add d2i,i2d bio/fp functions for PrivateKey: these convert the
5751 traditional format into an EVP_PKEY structure.
5754 *) Add a password callback function PEM_cb() which either prompts for
5755 a password if usr_data is NULL or otherwise assumes it is a null
5756 terminated password. Allow passwords to be passed on command line
5757 environment or config files in a few more utilities.
5760 *) Add a bunch of DER and PEM functions to handle PKCS#8 format private
5761 keys. Add some short names for PKCS#8 PBE algorithms and allow them
5762 to be specified on the command line for the pkcs8 and pkcs12 utilities.
5763 Update documentation.
5766 *) Support for ASN1 "NULL" type. This could be handled before by using
5767 ASN1_TYPE but there wasn't any function that would try to read a NULL
5768 and produce an error if it couldn't. For compatibility we also have
5769 ASN1_NULL_new() and ASN1_NULL_free() functions but these are faked and
5770 don't allocate anything because they don't need to.
5773 *) Initial support for MacOS is now provided. Examine INSTALL.MacOS
5775 [Andy Polyakov, Roy Woods <roy@centicsystems.ca>]
5777 *) Rebuild of the memory allocation routines used by OpenSSL code and
5778 possibly others as well. The purpose is to make an interface that
5779 provide hooks so anyone can build a separate set of allocation and
5780 deallocation routines to be used by OpenSSL, for example memory
5781 pool implementations, or something else, which was previously hard
5782 since Malloc(), Realloc() and Free() were defined as macros having
5783 the values malloc, realloc and free, respectively (except for Win32
5784 compilations). The same is provided for memory debugging code.
5785 OpenSSL already comes with functionality to find memory leaks, but
5786 this gives people a chance to debug other memory problems.
5788 With these changes, a new set of functions and macros have appeared:
5790 CRYPTO_set_mem_debug_functions() [F]
5791 CRYPTO_get_mem_debug_functions() [F]
5792 CRYPTO_dbg_set_options() [F]
5793 CRYPTO_dbg_get_options() [F]
5794 CRYPTO_malloc_debug_init() [M]
5796 The memory debug functions are NULL by default, unless the library
5797 is compiled with CRYPTO_MDEBUG or friends is defined. If someone
5798 wants to debug memory anyway, CRYPTO_malloc_debug_init() (which
5799 gives the standard debugging functions that come with OpenSSL) or
5800 CRYPTO_set_mem_debug_functions() (tells OpenSSL to use functions
5801 provided by the library user) must be used. When the standard
5802 debugging functions are used, CRYPTO_dbg_set_options can be used to
5803 request additional information:
5804 CRYPTO_dbg_set_options(V_CYRPTO_MDEBUG_xxx) corresponds to setting
5805 the CRYPTO_MDEBUG_xxx macro when compiling the library.
5807 Also, things like CRYPTO_set_mem_functions will always give the
5808 expected result (the new set of functions is used for allocation
5809 and deallocation) at all times, regardless of platform and compiler
5812 To finish it up, some functions that were never use in any other
5813 way than through macros have a new API and new semantic:
5816 CRYPTO_dbg_realloc()
5819 All macros of value have retained their old syntax.
5820 [Richard Levitte and Bodo Moeller]
5822 *) Some S/MIME fixes. The OID for SMIMECapabilities was wrong, the
5823 ordering of SMIMECapabilities wasn't in "strength order" and there
5824 was a missing NULL in the AlgorithmIdentifier for the SHA1 signature
5828 *) Some ASN1 types with illegal zero length encoding (INTEGER,
5829 ENUMERATED and OBJECT IDENTIFIER) choked the ASN1 routines.
5830 [Frans Heymans <fheymans@isaserver.be>, modified by Steve Henson]
5832 *) Merge in my S/MIME library for OpenSSL. This provides a simple
5833 S/MIME API on top of the PKCS#7 code, a MIME parser (with enough
5834 functionality to handle multipart/signed properly) and a utility
5835 called 'smime' to call all this stuff. This is based on code I
5836 originally wrote for Celo who have kindly allowed it to be
5837 included in OpenSSL.
5840 *) Add variants des_set_key_checked and des_set_key_unchecked of
5841 des_set_key (aka des_key_sched). Global variable des_check_key
5842 decides which of these is called by des_set_key; this way
5843 des_check_key behaves as it always did, but applications and
5844 the library itself, which was buggy for des_check_key == 1,
5845 have a cleaner way to pick the version they need.
5848 *) New function PKCS12_newpass() which changes the password of a
5852 *) Modify X509_TRUST and X509_PURPOSE so it also uses a static and
5853 dynamic mix. In both cases the ids can be used as an index into the
5854 table. Also modified the X509_TRUST_add() and X509_PURPOSE_add()
5855 functions so they accept a list of the field values and the
5856 application doesn't need to directly manipulate the X509_TRUST
5860 *) Modify the ASN1_STRING_TABLE stuff so it also uses bsearch and doesn't
5864 *) Modify the way the V3 extension code looks up extensions. This now
5865 works in a similar way to the object code: we have some "standard"
5866 extensions in a static table which is searched with OBJ_bsearch()
5867 and the application can add dynamic ones if needed. The file
5868 crypto/x509v3/ext_dat.h now has the info: this file needs to be
5869 updated whenever a new extension is added to the core code and kept
5870 in ext_nid order. There is a simple program 'tabtest.c' which checks
5871 this. New extensions are not added too often so this file can readily
5872 be maintained manually.
5874 There are two big advantages in doing things this way. The extensions
5875 can be looked up immediately and no longer need to be "added" using
5876 X509V3_add_standard_extensions(): this function now does nothing.
5877 [Side note: I get *lots* of email saying the extension code doesn't
5878 work because people forget to call this function]
5879 Also no dynamic allocation is done unless new extensions are added:
5880 so if we don't add custom extensions there is no need to call
5881 X509V3_EXT_cleanup().
5884 *) Modify enc utility's salting as follows: make salting the default. Add a
5885 magic header, so unsalted files fail gracefully instead of just decrypting
5886 to garbage. This is because not salting is a big security hole, so people
5887 should be discouraged from doing it.
5890 *) Fixes and enhancements to the 'x509' utility. It allowed a message
5891 digest to be passed on the command line but it only used this
5892 parameter when signing a certificate. Modified so all relevant
5893 operations are affected by the digest parameter including the
5894 -fingerprint and -x509toreq options. Also -x509toreq choked if a
5895 DSA key was used because it didn't fix the digest.
5898 *) Initial certificate chain verify code. Currently tests the untrusted
5899 certificates for consistency with the verify purpose (which is set
5900 when the X509_STORE_CTX structure is set up) and checks the pathlength.
5902 There is a NO_CHAIN_VERIFY compilation option to keep the old behaviour:
5903 this is because it will reject chains with invalid extensions whereas
5904 every previous version of OpenSSL and SSLeay made no checks at all.
5906 Trust code: checks the root CA for the relevant trust settings. Trust
5907 settings have an initial value consistent with the verify purpose: e.g.
5908 if the verify purpose is for SSL client use it expects the CA to be
5909 trusted for SSL client use. However the default value can be changed to
5910 permit custom trust settings: one example of this would be to only trust
5911 certificates from a specific "secure" set of CAs.
5913 Also added X509_STORE_CTX_new() and X509_STORE_CTX_free() functions
5914 which should be used for version portability: especially since the
5915 verify structure is likely to change more often now.
5917 SSL integration. Add purpose and trust to SSL_CTX and SSL and functions
5918 to set them. If not set then assume SSL clients will verify SSL servers
5921 Two new options to the verify program: -untrusted allows a set of
5922 untrusted certificates to be passed in and -purpose which sets the
5923 intended purpose of the certificate. If a purpose is set then the
5924 new chain verify code is used to check extension consistency.
5927 *) Support for the authority information access extension.
5930 *) Modify RSA and DSA PEM read routines to transparently handle
5931 PKCS#8 format private keys. New *_PUBKEY_* functions that handle
5932 public keys in a format compatible with certificate
5933 SubjectPublicKeyInfo structures. Unfortunately there were already
5934 functions called *_PublicKey_* which used various odd formats so
5935 these are retained for compatibility: however the DSA variants were
5936 never in a public release so they have been deleted. Changed dsa/rsa
5937 utilities to handle the new format: note no releases ever handled public
5938 keys so we should be OK.
5940 The primary motivation for this change is to avoid the same fiasco
5941 that dogs private keys: there are several incompatible private key
5942 formats some of which are standard and some OpenSSL specific and
5943 require various evil hacks to allow partial transparent handling and
5944 even then it doesn't work with DER formats. Given the option anything
5945 other than PKCS#8 should be dumped: but the other formats have to
5946 stay in the name of compatibility.
5948 With public keys and the benefit of hindsight one standard format
5949 is used which works with EVP_PKEY, RSA or DSA structures: though
5950 it clearly returns an error if you try to read the wrong kind of key.
5952 Added a -pubkey option to the 'x509' utility to output the public key.
5953 Also rename the EVP_PKEY_get_*() to EVP_PKEY_rget_*()
5954 (renamed to EVP_PKEY_get1_*() in the OpenSSL 0.9.5 release) and add
5955 EVP_PKEY_rset_*() functions (renamed to EVP_PKEY_set1_*())
5956 that do the same as the EVP_PKEY_assign_*() except they up the
5957 reference count of the added key (they don't "swallow" the
5961 *) Fixes to crypto/x509/by_file.c the code to read in certificates and
5962 CRLs would fail if the file contained no certificates or no CRLs:
5963 added a new function to read in both types and return the number
5964 read: this means that if none are read it will be an error. The
5965 DER versions of the certificate and CRL reader would always fail
5966 because it isn't possible to mix certificates and CRLs in DER format
5967 without choking one or the other routine. Changed this to just read
5968 a certificate: this is the best we can do. Also modified the code
5969 in apps/verify.c to take notice of return codes: it was previously
5970 attempting to read in certificates from NULL pointers and ignoring
5971 any errors: this is one reason why the cert and CRL reader seemed
5972 to work. It doesn't check return codes from the default certificate
5973 routines: these may well fail if the certificates aren't installed.
5976 *) Code to support otherName option in GeneralName.
5979 *) First update to verify code. Change the verify utility
5980 so it warns if it is passed a self signed certificate:
5981 for consistency with the normal behaviour. X509_verify
5982 has been modified to it will now verify a self signed
5983 certificate if *exactly* the same certificate appears
5984 in the store: it was previously impossible to trust a
5985 single self signed certificate. This means that:
5986 openssl verify ss.pem
5987 now gives a warning about a self signed certificate but
5988 openssl verify -CAfile ss.pem ss.pem
5992 *) For servers, store verify_result in SSL_SESSION data structure
5993 (and add it to external session representation).
5994 This is needed when client certificate verifications fails,
5995 but an application-provided verification callback (set by
5996 SSL_CTX_set_cert_verify_callback) allows accepting the session
5997 anyway (i.e. leaves x509_store_ctx->error != X509_V_OK
5998 but returns 1): When the session is reused, we have to set
5999 ssl->verify_result to the appropriate error code to avoid
6001 [Bodo Moeller, problem pointed out by Lutz Jaenicke]
6003 *) Fix a bug in the new PKCS#7 code: it didn't consider the
6004 case in PKCS7_dataInit() where the signed PKCS7 structure
6005 didn't contain any existing data because it was being created.
6006 [Po-Cheng Chen <pocheng@nst.com.tw>, slightly modified by Steve Henson]
6008 *) Add a salt to the key derivation routines in enc.c. This
6009 forms the first 8 bytes of the encrypted file. Also add a
6010 -S option to allow a salt to be input on the command line.
6013 *) New function X509_cmp(). Oddly enough there wasn't a function
6014 to compare two certificates. We do this by working out the SHA1
6015 hash and comparing that. X509_cmp() will be needed by the trust
6019 *) SSL_get1_session() is like SSL_get_session(), but increments
6020 the reference count in the SSL_SESSION returned.
6021 [Geoff Thorpe <geoff@eu.c2.net>]
6023 *) Fix for 'req': it was adding a null to request attributes.
6024 Also change the X509_LOOKUP and X509_INFO code to handle
6025 certificate auxiliary information.
6028 *) Add support for 40 and 64 bit RC2 and RC4 algorithms: document
6032 *) Add the possibility to add extra information to the memory leak
6033 detecting output, to form tracebacks, showing from where each
6034 allocation was originated: CRYPTO_push_info("constant string") adds
6035 the string plus current file name and line number to a per-thread
6036 stack, CRYPTO_pop_info() does the obvious, CRYPTO_remove_all_info()
6037 is like calling CYRPTO_pop_info() until the stack is empty.
6038 Also updated memory leak detection code to be multi-thread-safe.
6041 *) Add options -text and -noout to pkcs7 utility and delete the
6042 encryption options which never did anything. Update docs.
6045 *) Add options to some of the utilities to allow the pass phrase
6046 to be included on either the command line (not recommended on
6047 OSes like Unix) or read from the environment. Update the
6048 manpages and fix a few bugs.
6051 *) Add a few manpages for some of the openssl commands.
6054 *) Fix the -revoke option in ca. It was freeing up memory twice,
6055 leaking and not finding already revoked certificates.
6058 *) Extensive changes to support certificate auxiliary information.
6059 This involves the use of X509_CERT_AUX structure and X509_AUX
6060 functions. An X509_AUX function such as PEM_read_X509_AUX()
6061 can still read in a certificate file in the usual way but it
6062 will also read in any additional "auxiliary information". By
6063 doing things this way a fair degree of compatibility can be
6064 retained: existing certificates can have this information added
6065 using the new 'x509' options.
6067 Current auxiliary information includes an "alias" and some trust
6068 settings. The trust settings will ultimately be used in enhanced
6069 certificate chain verification routines: currently a certificate
6070 can only be trusted if it is self signed and then it is trusted
6074 *) Fix assembler for Alpha (tested only on DEC OSF not Linux or *BSD).
6075 The problem was that one of the replacement routines had not been working
6076 since SSLeay releases. For now the offending routine has been replaced
6077 with non-optimised assembler. Even so, this now gives around 95%
6078 performance improvement for 1024 bit RSA signs.
6081 *) Hack to fix PKCS#7 decryption when used with some unorthodox RC2
6082 handling. Most clients have the effective key size in bits equal to
6083 the key length in bits: so a 40 bit RC2 key uses a 40 bit (5 byte) key.
6084 A few however don't do this and instead use the size of the decrypted key
6085 to determine the RC2 key length and the AlgorithmIdentifier to determine
6086 the effective key length. In this case the effective key length can still
6087 be 40 bits but the key length can be 168 bits for example. This is fixed
6088 by manually forcing an RC2 key into the EVP_PKEY structure because the
6089 EVP code can't currently handle unusual RC2 key sizes: it always assumes
6090 the key length and effective key length are equal.
6093 *) Add a bunch of functions that should simplify the creation of
6094 X509_NAME structures. Now you should be able to do:
6095 X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, "Steve", -1, -1, 0);
6096 and have it automatically work out the correct field type and fill in
6097 the structures. The more adventurous can try:
6098 X509_NAME_add_entry_by_txt(nm, field, MBSTRING_UTF8, str, -1, -1, 0);
6099 and it will (hopefully) work out the correct multibyte encoding.
6102 *) Change the 'req' utility to use the new field handling and multibyte
6103 copy routines. Before the DN field creation was handled in an ad hoc
6104 way in req, ca, and x509 which was rather broken and didn't support
6105 BMPStrings or UTF8Strings. Since some software doesn't implement
6106 BMPStrings or UTF8Strings yet, they can be enabled using the config file
6107 using the dirstring_type option. See the new comment in the default
6108 openssl.cnf for more info.
6111 *) Make crypto/rand/md_rand.c more robust:
6112 - Assure unique random numbers after fork().
6113 - Make sure that concurrent threads access the global counter and
6114 md serializably so that we never lose entropy in them
6115 or use exactly the same state in multiple threads.
6116 Access to the large state is not always serializable because
6117 the additional locking could be a performance killer, and
6118 md should be large enough anyway.
6121 *) New file apps/app_rand.c with commonly needed functionality
6122 for handling the random seed file.
6124 Use the random seed file in some applications that previously did not:
6126 dsaparam -genkey (which also ignored its '-rand' option),
6129 x509 (when signing).
6130 Except on systems with /dev/urandom, it is crucial to have a random
6131 seed file at least for key creation, DSA signing, and for DH exchanges;
6132 for RSA signatures we could do without one.
6134 gendh and gendsa (unlike genrsa) used to read only the first byte
6135 of each file listed in the '-rand' option. The function as previously
6136 found in genrsa is now in app_rand.c and is used by all programs
6137 that support '-rand'.
6140 *) In RAND_write_file, use mode 0600 for creating files;
6141 don't just chmod when it may be too late.
6144 *) Report an error from X509_STORE_load_locations
6145 when X509_LOOKUP_load_file or X509_LOOKUP_add_dir failed.
6148 *) New function ASN1_mbstring_copy() this copies a string in either
6149 ASCII, Unicode, Universal (4 bytes per character) or UTF8 format
6150 into an ASN1_STRING type. A mask of permissible types is passed
6151 and it chooses the "minimal" type to use or an error if not type
6155 *) Add function equivalents to the various macros in asn1.h. The old
6156 macros are retained with an M_ prefix. Code inside the library can
6157 use the M_ macros. External code (including the openssl utility)
6158 should *NOT* in order to be "shared library friendly".
6161 *) Add various functions that can check a certificate's extensions
6162 to see if it usable for various purposes such as SSL client,
6163 server or S/MIME and CAs of these types. This is currently
6164 VERY EXPERIMENTAL but will ultimately be used for certificate chain
6165 verification. Also added a -purpose flag to x509 utility to
6166 print out all the purposes.
6169 *) Add a CRYPTO_EX_DATA to X509 certificate structure and associated
6173 *) New X509V3_{X509,CRL,REVOKED}_get_d2i() functions. These will search
6174 for, obtain and decode and extension and obtain its critical flag.
6175 This allows all the necessary extension code to be handled in a
6176 single function call.
6179 *) RC4 tune-up featuring 30-40% performance improvement on most RISC
6180 platforms. See crypto/rc4/rc4_enc.c for further details.
6183 *) New -noout option to asn1parse. This causes no output to be produced
6184 its main use is when combined with -strparse and -out to extract data
6185 from a file (which may not be in ASN.1 format).
6188 *) Fix for pkcs12 program. It was hashing an invalid certificate pointer
6189 when producing the local key id.
6190 [Richard Levitte <levitte@stacken.kth.se>]
6192 *) New option -dhparam in s_server. This allows a DH parameter file to be
6193 stated explicitly. If it is not stated then it tries the first server
6194 certificate file. The previous behaviour hard coded the filename
6198 *) Add -pubin and -pubout options to the rsa and dsa commands. These allow
6199 a public key to be input or output. For example:
6200 openssl rsa -in key.pem -pubout -out pubkey.pem
6201 Also added necessary DSA public key functions to handle this.
6204 *) Fix so PKCS7_dataVerify() doesn't crash if no certificates are contained
6205 in the message. This was handled by allowing
6206 X509_find_by_issuer_and_serial() to tolerate a NULL passed to it.
6207 [Steve Henson, reported by Sampo Kellomaki <sampo@mail.neuronio.pt>]
6209 *) Fix for bug in d2i_ASN1_bytes(): other ASN1 functions add an extra null
6210 to the end of the strings whereas this didn't. This would cause problems
6211 if strings read with d2i_ASN1_bytes() were later modified.
6212 [Steve Henson, reported by Arne Ansper <arne@ats.cyber.ee>]
6214 *) Fix for base64 decode bug. When a base64 bio reads only one line of
6215 data and it contains EOF it will end up returning an error. This is
6216 caused by input 46 bytes long. The cause is due to the way base64
6217 BIOs find the start of base64 encoded data. They do this by trying a
6218 trial decode on each line until they find one that works. When they
6219 do a flag is set and it starts again knowing it can pass all the
6220 data directly through the decoder. Unfortunately it doesn't reset
6221 the context it uses. This means that if EOF is reached an attempt
6222 is made to pass two EOFs through the context and this causes the
6223 resulting error. This can also cause other problems as well. As is
6224 usual with these problems it takes *ages* to find and the fix is
6225 trivial: move one line.
6226 [Steve Henson, reported by ian@uns.ns.ac.yu (Ivan Nejgebauer) ]
6228 *) Ugly workaround to get s_client and s_server working under Windows. The
6229 old code wouldn't work because it needed to select() on sockets and the
6230 tty (for keypresses and to see if data could be written). Win32 only
6231 supports select() on sockets so we select() with a 1s timeout on the
6232 sockets and then see if any characters are waiting to be read, if none
6233 are present then we retry, we also assume we can always write data to
6234 the tty. This isn't nice because the code then blocks until we've
6235 received a complete line of data and it is effectively polling the
6236 keyboard at 1s intervals: however it's quite a bit better than not
6237 working at all :-) A dedicated Windows application might handle this
6238 with an event loop for example.
6241 *) Enhance RSA_METHOD structure. Now there are two extra methods, rsa_sign
6242 and rsa_verify. When the RSA_FLAGS_SIGN_VER option is set these functions
6243 will be called when RSA_sign() and RSA_verify() are used. This is useful
6244 if rsa_pub_dec() and rsa_priv_enc() equivalents are not available.
6245 For this to work properly RSA_public_decrypt() and RSA_private_encrypt()
6246 should *not* be used: RSA_sign() and RSA_verify() must be used instead.
6247 This necessitated the support of an extra signature type NID_md5_sha1
6248 for SSL signatures and modifications to the SSL library to use it instead
6249 of calling RSA_public_decrypt() and RSA_private_encrypt().
6252 *) Add new -verify -CAfile and -CApath options to the crl program, these
6253 will lookup a CRL issuers certificate and verify the signature in a
6254 similar way to the verify program. Tidy up the crl program so it
6255 no longer accesses structures directly. Make the ASN1 CRL parsing a bit
6256 less strict. It will now permit CRL extensions even if it is not
6257 a V2 CRL: this will allow it to tolerate some broken CRLs.
6260 *) Initialize all non-automatic variables each time one of the openssl
6261 sub-programs is started (this is necessary as they may be started
6262 multiple times from the "OpenSSL>" prompt).
6263 [Lennart Bang, Bodo Moeller]
6265 *) Preliminary compilation option RSA_NULL which disables RSA crypto without
6266 removing all other RSA functionality (this is what NO_RSA does). This
6267 is so (for example) those in the US can disable those operations covered
6268 by the RSA patent while allowing storage and parsing of RSA keys and RSA
6272 *) Non-copying interface to BIO pairs.
6273 (still largely untested)
6276 *) New function ANS1_tag2str() to convert an ASN1 tag to a descriptive
6277 ASCII string. This was handled independently in various places before.
6280 *) New functions UTF8_getc() and UTF8_putc() that parse and generate
6281 UTF8 strings a character at a time.
6284 *) Use client_version from client hello to select the protocol
6285 (s23_srvr.c) and for RSA client key exchange verification
6286 (s3_srvr.c), as required by the SSL 3.0/TLS 1.0 specifications.
6289 *) Add various utility functions to handle SPKACs, these were previously
6290 handled by poking round in the structure internals. Added new function
6291 NETSCAPE_SPKI_print() to print out SPKAC and a new utility 'spkac' to
6292 print, verify and generate SPKACs. Based on an original idea from
6293 Massimiliano Pala <madwolf@comune.modena.it> but extensively modified.
6296 *) RIPEMD160 is operational on all platforms and is back in 'make test'.
6299 *) Allow the config file extension section to be overwritten on the
6300 command line. Based on an original idea from Massimiliano Pala
6301 <madwolf@comune.modena.it>. The new option is called -extensions
6302 and can be applied to ca, req and x509. Also -reqexts to override
6303 the request extensions in req and -crlexts to override the crl extensions
6307 *) Add new feature to the SPKAC handling in ca. Now you can include
6308 the same field multiple times by preceding it by "XXXX." for example:
6311 this is the same syntax as used in the req config file.
6314 *) Allow certificate extensions to be added to certificate requests. These
6315 are specified in a 'req_extensions' option of the req section of the
6316 config file. They can be printed out with the -text option to req but
6317 are otherwise ignored at present.
6320 *) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first
6321 data read consists of only the final block it would not decrypted because
6322 EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
6323 A misplaced 'break' also meant the decrypted final block might not be
6324 copied until the next read.
6327 *) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
6328 a few extra parameters to the DH structure: these will be useful if
6329 for example we want the value of 'q' or implement X9.42 DH.
6332 *) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
6333 provides hooks that allow the default DSA functions or functions on a
6334 "per key" basis to be replaced. This allows hardware acceleration and
6335 hardware key storage to be handled without major modification to the
6336 library. Also added low level modexp hooks and CRYPTO_EX structure and
6337 associated functions.
6340 *) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
6341 as "read only": it can't be written to and the buffer it points to will
6342 not be freed. Reading from a read only BIO is much more efficient than
6343 a normal memory BIO. This was added because there are several times when
6344 an area of memory needs to be read from a BIO. The previous method was
6345 to create a memory BIO and write the data to it, this results in two
6346 copies of the data and an O(n^2) reading algorithm. There is a new
6347 function BIO_new_mem_buf() which creates a read only memory BIO from
6348 an area of memory. Also modified the PKCS#7 routines to use read only
6352 *) Bugfix: ssl23_get_client_hello did not work properly when called in
6353 state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
6354 a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
6355 but a retry condition occured while trying to read the rest.
6358 *) The PKCS7_ENC_CONTENT_new() function was setting the content type as
6359 NID_pkcs7_encrypted by default: this was wrong since this should almost
6360 always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
6361 the encrypted data type: this is a more sensible place to put it and it
6362 allows the PKCS#12 code to be tidied up that duplicated this
6366 *) Changed obj_dat.pl script so it takes its input and output files on
6367 the command line. This should avoid shell escape redirection problems
6371 *) Initial support for certificate extension requests, these are included
6372 in things like Xenroll certificate requests. Included functions to allow
6373 extensions to be obtained and added.
6376 *) -crlf option to s_client and s_server for sending newlines as
6377 CRLF (as required by many protocols).
6380 Changes between 0.9.3a and 0.9.4 [09 Aug 1999]
6382 *) Install libRSAglue.a when OpenSSL is built with RSAref.
6383 [Ralf S. Engelschall]
6385 *) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
6386 [Andrija Antonijevic <TheAntony2@bigfoot.com>]
6388 *) Fix -startdate and -enddate (which was missing) arguments to 'ca'
6392 *) New function DSA_dup_DH, which duplicates DSA parameters/keys as
6393 DH parameters/keys (q is lost during that conversion, but the resulting
6394 DH parameters contain its length).
6396 For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
6397 much faster than DH_generate_parameters (which creates parameters
6398 where p = 2*q + 1), and also the smaller q makes DH computations
6399 much more efficient (160-bit exponentiation instead of 1024-bit
6400 exponentiation); so this provides a convenient way to support DHE
6401 ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
6402 utter importance to use
6403 SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
6405 SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
6406 when such DH parameters are used, because otherwise small subgroup
6407 attacks may become possible!
6410 *) Avoid memory leak in i2d_DHparams.
6413 *) Allow the -k option to be used more than once in the enc program:
6414 this allows the same encrypted message to be read by multiple recipients.
6417 *) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
6418 an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
6419 it will always use the numerical form of the OID, even if it has a short
6423 *) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
6424 method only got called if p,q,dmp1,dmq1,iqmp components were present,
6425 otherwise bn_mod_exp was called. In the case of hardware keys for example
6426 no private key components need be present and it might store extra data
6427 in the RSA structure, which cannot be accessed from bn_mod_exp.
6428 By setting RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for
6429 private key operations.
6432 *) Added support for SPARC Linux.
6435 *) pem_password_cb function type incompatibly changed from
6436 typedef int pem_password_cb(char *buf, int size, int rwflag);
6438 ....(char *buf, int size, int rwflag, void *userdata);
6439 so that applications can pass data to their callbacks:
6440 The PEM[_ASN1]_{read,write}... functions and macros now take an
6441 additional void * argument, which is just handed through whenever
6442 the password callback is called.
6443 [Damien Miller <dmiller@ilogic.com.au>; tiny changes by Bodo Moeller]
6445 New function SSL_CTX_set_default_passwd_cb_userdata.
6447 Compatibility note: As many C implementations push function arguments
6448 onto the stack in reverse order, the new library version is likely to
6449 interoperate with programs that have been compiled with the old
6450 pem_password_cb definition (PEM_whatever takes some data that
6451 happens to be on the stack as its last argument, and the callback
6452 just ignores this garbage); but there is no guarantee whatsoever that
6455 *) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
6456 (both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
6457 problems not only on Windows, but also on some Unix platforms.
6458 To avoid problematic command lines, these definitions are now in an
6459 auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
6460 for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
6463 *) MIPS III/IV assembler module is reimplemented.
6466 *) More DES library cleanups: remove references to srand/rand and
6467 delete an unused file.
6470 *) Add support for the the free Netwide assembler (NASM) under Win32,
6471 since not many people have MASM (ml) and it can be hard to obtain.
6472 This is currently experimental but it seems to work OK and pass all
6473 the tests. Check out INSTALL.W32 for info.
6476 *) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
6477 without temporary keys kept an extra copy of the server key,
6478 and connections with temporary keys did not free everything in case
6482 *) New function RSA_check_key and new openssl rsa option -check
6483 for verifying the consistency of RSA keys.
6484 [Ulf Moeller, Bodo Moeller]
6486 *) Various changes to make Win32 compile work:
6487 1. Casts to avoid "loss of data" warnings in p5_crpt2.c
6488 2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
6489 comparison" warnings.
6490 3. Add sk_<TYPE>_sort to DEF file generator and do make update.
6493 *) Add a debugging option to PKCS#5 v2 key generation function: when
6494 you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
6495 derived keys are printed to stderr.
6498 *) Copy the flags in ASN1_STRING_dup().
6499 [Roman E. Pavlov <pre@mo.msk.ru>]
6501 *) The x509 application mishandled signing requests containing DSA
6502 keys when the signing key was also DSA and the parameters didn't match.
6504 It was supposed to omit the parameters when they matched the signing key:
6505 the verifying software was then supposed to automatically use the CA's
6506 parameters if they were absent from the end user certificate.
6508 Omitting parameters is no longer recommended. The test was also
6509 the wrong way round! This was probably due to unusual behaviour in
6510 EVP_cmp_parameters() which returns 1 if the parameters match.
6511 This meant that parameters were omitted when they *didn't* match and
6512 the certificate was useless. Certificates signed with 'ca' didn't have
6514 [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
6516 *) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
6517 The interface is as follows:
6518 Applications can use
6519 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
6520 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
6521 "off" is now the default.
6522 The library internally uses
6523 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
6524 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
6525 to disable memory-checking temporarily.
6527 Some inconsistent states that previously were possible (and were
6528 even the default) are now avoided.
6530 -DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
6531 with each memory chunk allocated; this is occasionally more helpful
6532 than just having a counter.
6534 -DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
6536 -DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
6540 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
6541 which largely parallels "options", but is for changing API behaviour,
6542 whereas "options" are about protocol behaviour.
6543 Initial "mode" flags are:
6545 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
6546 a single record has been written.
6547 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
6548 retries use the same buffer location.
6549 (But all of the contents must be
6553 *) Bugfix: SSL_set_options ignored its parameter, only SSL_CTX_set_options
6556 *) Fix problems with no-hmac etc.
6557 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
6559 *) New functions RSA_get_default_method(), RSA_set_method() and
6560 RSA_get_method(). These allows replacement of RSA_METHODs without having
6561 to mess around with the internals of an RSA structure.
6564 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
6565 Also really enable memory leak checks in openssl.c and in some
6567 [Chad C. Mulligan, Bodo Moeller]
6569 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
6570 up the length of negative integers. This has now been simplified to just
6571 store the length when it is first determined and use it later, rather
6572 than trying to keep track of where data is copied and updating it to
6574 [Steve Henson, reported by Brien Wheeler
6575 <bwheeler@authentica-security.com>]
6577 *) Add a new function PKCS7_signatureVerify. This allows the verification
6578 of a PKCS#7 signature but with the signing certificate passed to the
6579 function itself. This contrasts with PKCS7_dataVerify which assumes the
6580 certificate is present in the PKCS#7 structure. This isn't always the
6581 case: certificates can be omitted from a PKCS#7 structure and be
6582 distributed by "out of band" means (such as a certificate database).
6585 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
6586 function prototypes in pem.h, also change util/mkdef.pl to add the
6587 necessary function names.
6590 *) mk1mf.pl (used by Windows builds) did not properly read the
6591 options set by Configure in the top level Makefile, and Configure
6592 was not even able to write more than one option correctly.
6593 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
6596 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
6597 file to be loaded from a BIO or FILE pointer. The BIO version will
6598 for example allow memory BIOs to contain config info.
6601 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
6602 Whoever hopes to achieve shared-library compatibility across versions
6603 must use this, not the compile-time macro.
6604 (Exercise 0.9.4: Which is the minimum library version required by
6606 Note: All this applies only to multi-threaded programs, others don't
6610 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
6611 through a BIO pair triggered the default case, i.e.
6612 SSLerr(...,SSL_R_UNKNOWN_STATE).
6615 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
6616 can use the SSL library even if none of the specific BIOs is
6620 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
6621 for the encoded length.
6622 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
6624 *) Add initial documentation of the X509V3 functions.
6627 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
6628 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
6629 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
6630 secure PKCS#8 private key format with a high iteration count.
6633 *) Fix determination of Perl interpreter: A perl or perl5
6634 _directory_ in $PATH was also accepted as the interpreter.
6635 [Ralf S. Engelschall]
6637 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
6638 wrong with it but it was very old and did things like calling
6639 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
6643 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
6644 to use the new extension code.
6647 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
6648 with macros. This should make it easier to change their form, add extra
6649 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
6653 *) Add to configuration table a new entry that can specify an alternative
6654 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
6655 according to Mark Crispin <MRC@Panda.COM>.
6659 *) DES CBC did not update the IV. Weird.
6662 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
6663 Changing the behaviour of the former might break existing programs --
6664 where IV updating is needed, des_ncbc_encrypt can be used.
6667 *) When bntest is run from "make test" it drives bc to check its
6668 calculations, as well as internally checking them. If an internal check
6669 fails, it needs to cause bc to give a non-zero result or make test carries
6670 on without noticing the failure. Fixed.
6673 *) DES library cleanups.
6676 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
6677 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
6678 ciphers. NOTE: although the key derivation function has been verified
6679 against some published test vectors it has not been extensively tested
6680 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
6684 *) Instead of "mkdir -p", which is not fully portable, use new
6685 Perl script "util/mkdir-p.pl".
6688 *) Rewrite the way password based encryption (PBE) is handled. It used to
6689 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
6690 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
6691 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
6692 the 'parameter' field of the AlgorithmIdentifier is passed to the
6693 underlying key generation function so it must do its own ASN1 parsing.
6694 This has also changed the EVP_PBE_CipherInit() function which now has a
6695 'parameter' argument instead of literal salt and iteration count values
6696 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
6699 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
6700 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
6701 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
6702 KEY" because this clashed with PKCS#8 unencrypted string. Since this
6703 value was just used as a "magic string" and not used directly its
6704 value doesn't matter.
6707 *) Introduce some semblance of const correctness to BN. Shame C doesn't
6711 *) "linux-sparc64" configuration (ultrapenguin).
6712 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
6713 "linux-sparc" configuration.
6714 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
6716 *) config now generates no-xxx options for missing ciphers.
6719 *) Support the EBCDIC character set (work in progress).
6720 File ebcdic.c not yet included because it has a different license.
6721 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
6723 *) Support BS2000/OSD-POSIX.
6724 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
6726 *) Make callbacks for key generation use void * instead of char *.
6729 *) Make S/MIME samples compile (not yet tested).
6732 *) Additional typesafe stacks.
6735 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
6739 Changes between 0.9.3 and 0.9.3a [29 May 1999]
6741 *) New configuration variant "sco5-gcc".
6743 *) Updated some demos.
6744 [Sean O Riordain, Wade Scholine]
6746 *) Add missing BIO_free at exit of pkcs12 application.
6749 *) Fix memory leak in conf.c.
6752 *) Updates for Win32 to assembler version of MD5.
6755 *) Set #! path to perl in apps/der_chop to where we found it
6756 instead of using a fixed path.
6759 *) SHA library changes for irix64-mips4-cc.
6762 *) Improvements for VMS support.
6766 Changes between 0.9.2b and 0.9.3 [24 May 1999]
6768 *) Bignum library bug fix. IRIX 6 passes "make test" now!
6769 This also avoids the problems with SC4.2 and unpatched SC5.
6770 [Andy Polyakov <appro@fy.chalmers.se>]
6772 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
6773 These are required because of the typesafe stack would otherwise break
6774 existing code. If old code used a structure member which used to be STACK
6775 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
6776 sk_num or sk_value it would produce an error because the num, data members
6777 are not present in STACK_OF. Now it just produces a warning. sk_set
6778 replaces the old method of assigning a value to sk_value
6779 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
6780 that does this will no longer work (and should use sk_set instead) but
6781 this could be regarded as a "questionable" behaviour anyway.
6784 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
6785 correctly handle encrypted S/MIME data.
6788 *) Change type of various DES function arguments from des_cblock
6789 (which means, in function argument declarations, pointer to char)
6790 to des_cblock * (meaning pointer to array with 8 char elements),
6791 which allows the compiler to do more typechecking; it was like
6792 that back in SSLeay, but with lots of ugly casts.
6794 Introduce new type const_des_cblock.
6797 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
6798 problems: find RecipientInfo structure that matches recipient certificate
6799 and initialise the ASN1 structures properly based on passed cipher.
6802 *) Belatedly make the BN tests actually check the results.
6805 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
6806 to and from BNs: it was completely broken. New compilation option
6807 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
6808 key elements as negative integers.
6811 *) Reorganize and speed up MD5.
6812 [Andy Polyakov <appro@fy.chalmers.se>]
6815 [Richard Levitte <richard@levitte.org>]
6817 *) New option -out to asn1parse to allow the parsed structure to be
6818 output to a file. This is most useful when combined with the -strparse
6819 option to examine the output of things like OCTET STRINGS.
6822 *) Make SSL library a little more fool-proof by not requiring any longer
6823 that SSL_set_{accept,connect}_state be called before
6824 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
6825 in many applications because usually everything *appeared* to work as
6826 intended anyway -- now it really works as intended).
6829 *) Move openssl.cnf out of lib/.
6832 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
6833 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
6834 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
6835 [Ralf S. Engelschall]
6837 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
6838 handle PKCS#7 enveloped data properly.
6839 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
6841 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
6842 copying pointers. The cert_st handling is changed by this in
6843 various ways (and thus what used to be known as ctx->default_cert
6844 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
6845 any longer when s->cert does not give us what we need).
6846 ssl_cert_instantiate becomes obsolete by this change.
6847 As soon as we've got the new code right (possibly it already is?),
6848 we have solved a couple of bugs of the earlier code where s->cert
6849 was used as if it could not have been shared with other SSL structures.
6851 Note that using the SSL API in certain dirty ways now will result
6852 in different behaviour than observed with earlier library versions:
6853 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
6854 does not influence s as it used to.
6856 In order to clean up things more thoroughly, inside SSL_SESSION
6857 we don't use CERT any longer, but a new structure SESS_CERT
6858 that holds per-session data (if available); currently, this is
6859 the peer's certificate chain and, for clients, the server's certificate
6860 and temporary key. CERT holds only those values that can have
6861 meaningful defaults in an SSL_CTX.
6864 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
6865 from the internal representation. Various PKCS#7 fixes: remove some
6866 evil casts and set the enc_dig_alg field properly based on the signing
6870 *) Allow PKCS#12 password to be set from the command line or the
6871 environment. Let 'ca' get its config file name from the environment
6872 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
6876 *) Allow certificate policies extension to use an IA5STRING for the
6877 organization field. This is contrary to the PKIX definition but
6878 VeriSign uses it and IE5 only recognises this form. Document 'x509'
6882 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
6883 without disallowing inline assembler and the like for non-pedantic builds.
6886 *) Support Borland C++ builder.
6887 [Janez Jere <jj@void.si>, modified by Ulf Möller]
6892 *) SHA-1 cleanups and performance enhancements.
6893 [Andy Polyakov <appro@fy.chalmers.se>]
6895 *) Sparc v8plus assembler for the bignum library.
6896 [Andy Polyakov <appro@fy.chalmers.se>]
6898 *) Accept any -xxx and +xxx compiler options in Configure.
6901 *) Update HPUX configuration.
6904 *) Add missing sk_<type>_unshift() function to safestack.h
6905 [Ralf S. Engelschall]
6907 *) New function SSL_CTX_use_certificate_chain_file that sets the
6908 "extra_cert"s in addition to the certificate. (This makes sense
6909 only for "PEM" format files, as chains as a whole are not
6913 *) Support verify_depth from the SSL API.
6914 x509_vfy.c had what can be considered an off-by-one-error:
6915 Its depth (which was not part of the external interface)
6916 was actually counting the number of certificates in a chain;
6917 now it really counts the depth.
6920 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
6921 instead of X509err, which often resulted in confusing error
6922 messages since the error codes are not globally unique
6923 (e.g. an alleged error in ssl3_accept when a certificate
6924 didn't match the private key).
6926 *) New function SSL_CTX_set_session_id_context that allows to set a default
6927 value (so that you don't need SSL_set_session_id_context for each
6928 connection using the SSL_CTX).
6931 *) OAEP decoding bug fix.
6934 *) Support INSTALL_PREFIX for package builders, as proposed by
6938 *) New Configure options "threads" and "no-threads". For systems
6939 where the proper compiler options are known (currently Solaris
6940 and Linux), "threads" is the default.
6943 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
6946 *) Install various scripts to $(OPENSSLDIR)/misc, not to
6947 $(INSTALLTOP)/bin -- they shouldn't clutter directories
6948 such as /usr/local/bin.
6951 *) "make linux-shared" to build shared libraries.
6952 [Niels Poppe <niels@netbox.org>]
6954 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
6957 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
6958 extension adding in x509 utility.
6961 *) Remove NOPROTO sections and error code comments.
6964 *) Partial rewrite of the DEF file generator to now parse the ANSI
6968 *) New Configure options --prefix=DIR and --openssldir=DIR.
6971 *) Complete rewrite of the error code script(s). It is all now handled
6972 by one script at the top level which handles error code gathering,
6973 header rewriting and C source file generation. It should be much better
6974 than the old method: it now uses a modified version of Ulf's parser to
6975 read the ANSI prototypes in all header files (thus the old K&R definitions
6976 aren't needed for error creation any more) and do a better job of
6977 translating function codes into names. The old 'ASN1 error code imbedded
6978 in a comment' is no longer necessary and it doesn't use .err files which
6979 have now been deleted. Also the error code call doesn't have to appear all
6980 on one line (which resulted in some large lines...).
6983 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
6986 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
6987 0 (which usually indicates a closed connection), but continue reading.
6990 *) Fix some race conditions.
6993 *) Add support for CRL distribution points extension. Add Certificate
6994 Policies and CRL distribution points documentation.
6997 *) Move the autogenerated header file parts to crypto/opensslconf.h.
7000 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
7001 8 of keying material. Merlin has also confirmed interop with this fix
7002 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
7003 [Merlin Hughes <merlin@baltimore.ie>]
7005 *) Fix lots of warnings.
7006 [Richard Levitte <levitte@stacken.kth.se>]
7008 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
7009 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
7010 [Richard Levitte <levitte@stacken.kth.se>]
7012 *) Fix problems with sizeof(long) == 8.
7013 [Andy Polyakov <appro@fy.chalmers.se>]
7015 *) Change functions to ANSI C.
7018 *) Fix typos in error codes.
7019 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
7021 *) Remove defunct assembler files from Configure.
7024 *) SPARC v8 assembler BIGNUM implementation.
7025 [Andy Polyakov <appro@fy.chalmers.se>]
7027 *) Support for Certificate Policies extension: both print and set.
7028 Various additions to support the r2i method this uses.
7031 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
7032 return a const string when you are expecting an allocated buffer.
7035 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
7036 types DirectoryString and DisplayText.
7039 *) Add code to allow r2i extensions to access the configuration database,
7040 add an LHASH database driver and add several ctx helper functions.
7043 *) Fix an evil bug in bn_expand2() which caused various BN functions to
7044 fail when they extended the size of a BIGNUM.
7047 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
7048 support typesafe stack.
7051 *) Fix typo in SSL_[gs]et_options().
7052 [Nils Frostberg <nils@medcom.se>]
7054 *) Delete various functions and files that belonged to the (now obsolete)
7055 old X509V3 handling code.
7058 *) New Configure option "rsaref".
7061 *) Don't auto-generate pem.h.
7064 *) Introduce type-safe ASN.1 SETs.
7067 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
7068 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
7070 *) Introduce type-safe STACKs. This will almost certainly break lots of code
7071 that links with OpenSSL (well at least cause lots of warnings), but fear
7072 not: the conversion is trivial, and it eliminates loads of evil casts. A
7073 few STACKed things have been converted already. Feel free to convert more.
7074 In the fullness of time, I'll do away with the STACK type altogether.
7077 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
7078 specified in <certfile> by updating the entry in the index.txt file.
7079 This way one no longer has to edit the index.txt file manually for
7080 revoking a certificate. The -revoke option does the gory details now.
7081 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
7083 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
7084 `-text' option at all and this way the `-noout -text' combination was
7085 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
7086 [Ralf S. Engelschall]
7088 *) Make sure a corresponding plain text error message exists for the
7089 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
7090 verify callback function determined that a certificate was revoked.
7091 [Ralf S. Engelschall]
7093 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
7094 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
7095 all available cipers including rc5, which was forgotten until now.
7096 In order to let the testing shell script know which algorithms
7097 are available, a new (up to now undocumented) command
7098 "openssl list-cipher-commands" is used.
7101 *) Bugfix: s_client occasionally would sleep in select() when
7102 it should have checked SSL_pending() first.
7105 *) New functions DSA_do_sign and DSA_do_verify to provide access to
7106 the raw DSA values prior to ASN.1 encoding.
7109 *) Tweaks to Configure
7110 [Niels Poppe <niels@netbox.org>]
7112 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
7116 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
7119 *) New config option to avoid instructions that are illegal on the 80386.
7120 The default code is faster, but requires at least a 486.
7123 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
7124 SSL2_SERVER_VERSION (not used at all) macros, which are now the
7125 same as SSL2_VERSION anyway.
7128 *) New "-showcerts" option for s_client.
7131 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
7132 application. Various cleanups and fixes.
7135 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
7136 modify error routines to work internally. Add error codes and PBE init
7137 to library startup routines.
7140 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
7141 packing functions to asn1 and evp. Changed function names and error
7142 codes along the way.
7145 *) PKCS12 integration: and so it begins... First of several patches to
7146 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
7147 objects to objects.h
7150 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
7151 and display support for Thawte strong extranet extension.
7154 *) Add LinuxPPC support.
7155 [Jeff Dubrule <igor@pobox.org>]
7157 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
7158 bn_div_words in alpha.s.
7159 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
7161 *) Make sure the RSA OAEP test is skipped under -DRSAref because
7162 OAEP isn't supported when OpenSSL is built with RSAref.
7163 [Ulf Moeller <ulf@fitug.de>]
7165 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
7166 so they no longer are missing under -DNOPROTO.
7167 [Soren S. Jorvang <soren@t.dk>]
7170 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
7172 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
7173 doesn't work when the session is reused. Coming soon!
7176 *) Fix a security hole, that allows sessions to be reused in the wrong
7177 context thus bypassing client cert protection! All software that uses
7178 client certs and session caches in multiple contexts NEEDS PATCHING to
7179 allow session reuse! A fuller solution is in the works.
7180 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
7182 *) Some more source tree cleanups (removed obsolete files
7183 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
7184 permission on "config" script to be executable) and a fix for the INSTALL
7186 [Ulf Moeller <ulf@fitug.de>]
7188 *) Remove some legacy and erroneous uses of malloc, free instead of
7190 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
7192 *) Make rsa_oaep_test return non-zero on error.
7193 [Ulf Moeller <ulf@fitug.de>]
7195 *) Add support for native Solaris shared libraries. Configure
7196 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
7197 if someone would make that last step automatic.
7198 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
7200 *) ctx_size was not built with the right compiler during "make links". Fixed.
7203 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
7204 except NULL ciphers". This means the default cipher list will no longer
7205 enable NULL ciphers. They need to be specifically enabled e.g. with
7206 the string "DEFAULT:eNULL".
7209 *) Fix to RSA private encryption routines: if p < q then it would
7210 occasionally produce an invalid result. This will only happen with
7211 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
7214 *) Be less restrictive and allow also `perl util/perlpath.pl
7215 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
7216 because this way one can also use an interpreter named `perl5' (which is
7217 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
7218 installed as `perl').
7219 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
7221 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
7222 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
7224 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
7225 advapi32.lib to Win32 build and change the pem test comparision
7226 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
7227 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
7228 and crypto/des/ede_cbcm_enc.c.
7231 *) DES quad checksum was broken on big-endian architectures. Fixed.
7234 *) Comment out two functions in bio.h that aren't implemented. Fix up the
7235 Win32 test batch file so it (might) work again. The Win32 test batch file
7236 is horrible: I feel ill....
7239 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
7240 in e_os.h. Audit of header files to check ANSI and non ANSI
7241 sections: 10 functions were absent from non ANSI section and not exported
7242 from Windows DLLs. Fixed up libeay.num for new functions.
7245 *) Make `openssl version' output lines consistent.
7246 [Ralf S. Engelschall]
7248 *) Fix Win32 symbol export lists for BIO functions: Added
7249 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
7250 to ms/libeay{16,32}.def.
7251 [Ralf S. Engelschall]
7253 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
7254 fine under Unix and passes some trivial tests I've now added. But the
7255 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
7256 added to make sure no one expects that this stuff really works in the
7257 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
7258 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
7260 [Ralf S. Engelschall]
7262 *) Fix the generation of two part addresses in perl.
7263 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
7265 *) Add config entry for Linux on MIPS.
7266 [John Tobey <jtobey@channel1.com>]
7268 *) Make links whenever Configure is run, unless we are on Windoze.
7271 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
7272 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
7276 *) Add a useful kludge to allow package maintainers to specify compiler and
7277 other platforms details on the command line without having to patch the
7278 Configure script everytime: One now can use ``perl Configure
7279 <id>:<details>'', i.e. platform ids are allowed to have details appended
7280 to them (seperated by colons). This is treated as there would be a static
7281 pre-configured entry in Configure's %table under key <id> with value
7282 <details> and ``perl Configure <id>'' is called. So, when you want to
7283 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
7284 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
7285 now, which overrides the FreeBSD-elf entry on-the-fly.
7286 [Ralf S. Engelschall]
7288 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
7291 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
7292 on the `perl Configure ...' command line. This way one can compile
7293 OpenSSL libraries with Position Independent Code (PIC) which is needed
7294 for linking it into DSOs.
7295 [Ralf S. Engelschall]
7297 *) Remarkably, export ciphers were totally broken and no-one had noticed!
7301 *) Cleaned up the LICENSE document: The official contact for any license
7302 questions now is the OpenSSL core team under openssl-core@openssl.org.
7303 And add a paragraph about the dual-license situation to make sure people
7304 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
7305 to the OpenSSL toolkit.
7306 [Ralf S. Engelschall]
7308 *) General source tree makefile cleanups: Made `making xxx in yyy...'
7309 display consistent in the source tree and replaced `/bin/rm' by `rm'.
7310 Additonally cleaned up the `make links' target: Remove unnecessary
7311 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
7312 to speed processing and no longer clutter the display with confusing
7313 stuff. Instead only the actually done links are displayed.
7314 [Ralf S. Engelschall]
7316 *) Permit null encryption ciphersuites, used for authentication only. It used
7317 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
7318 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
7322 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
7323 signed attributes when verifying signatures (this would break them),
7324 the detached data encoding was wrong and public keys obtained using
7325 X509_get_pubkey() weren't freed.
7328 *) Add text documentation for the BUFFER functions. Also added a work around
7329 to a Win95 console bug. This was triggered by the password read stuff: the
7330 last character typed gets carried over to the next fread(). If you were
7331 generating a new cert request using 'req' for example then the last
7332 character of the passphrase would be CR which would then enter the first
7336 *) Added the new `Includes OpenSSL Cryptography Software' button as
7337 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
7338 button and can be used by applications based on OpenSSL to show the
7339 relationship to the OpenSSL project.
7340 [Ralf S. Engelschall]
7342 *) Remove confusing variables in function signatures in files
7343 ssl/ssl_lib.c and ssl/ssl.h.
7344 [Lennart Bong <lob@kulthea.stacken.kth.se>]
7346 *) Don't install bss_file.c under PREFIX/include/
7347 [Lennart Bong <lob@kulthea.stacken.kth.se>]
7349 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
7350 functions that return function pointers and has support for NT specific
7351 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
7352 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
7353 unsigned to signed types: this was killing the Win32 compile.
7356 *) Add new certificate file to stack functions,
7357 SSL_add_dir_cert_subjects_to_stack() and
7358 SSL_add_file_cert_subjects_to_stack(). These largely supplant
7359 SSL_load_client_CA_file(), and can be used to add multiple certs easily
7360 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
7361 This means that Apache-SSL and similar packages don't have to mess around
7362 to add as many CAs as they want to the preferred list.
7365 *) Experiment with doxygen documentation. Currently only partially applied to
7367 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
7368 openssl.doxy as the configuration file.
7371 *) Get rid of remaining C++-style comments which strict C compilers hate.
7372 [Ralf S. Engelschall, pointed out by Carlos Amengual]
7374 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
7375 compiled in by default: it has problems with large keys.
7378 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
7379 DH private keys and/or callback functions which directly correspond to
7380 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
7381 is needed for applications which have to configure certificates on a
7382 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
7384 For the RSA certificate situation is makes no difference, but
7385 for the DSA certificate situation this fixes the "no shared cipher"
7386 problem where the OpenSSL cipher selection procedure failed because the
7387 temporary keys were not overtaken from the context and the API provided
7388 no way to reconfigure them.
7389 The new functions now let applications reconfigure the stuff and they
7390 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
7391 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
7392 non-public-API function ssl_cert_instantiate() is used as a helper
7393 function and also to reduce code redundancy inside ssl_rsa.c.
7394 [Ralf S. Engelschall]
7396 *) Move s_server -dcert and -dkey options out of the undocumented feature
7397 area because they are useful for the DSA situation and should be
7398 recognized by the users.
7399 [Ralf S. Engelschall]
7401 *) Fix the cipher decision scheme for export ciphers: the export bits are
7402 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
7403 SSL_EXP_MASK. So, the original variable has to be used instead of the
7404 already masked variable.
7405 [Richard Levitte <levitte@stacken.kth.se>]
7407 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
7408 [Richard Levitte <levitte@stacken.kth.se>]
7410 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
7411 from `int' to `unsigned int' because it's a length and initialized by
7412 EVP_DigestFinal() which expects an `unsigned int *'.
7413 [Richard Levitte <levitte@stacken.kth.se>]
7415 *) Don't hard-code path to Perl interpreter on shebang line of Configure
7416 script. Instead use the usual Shell->Perl transition trick.
7417 [Ralf S. Engelschall]
7419 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
7420 (in addition to RSA certificates) to match the behaviour of `openssl dsa
7421 -noout -modulus' as it's already the case for `openssl rsa -noout
7422 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
7423 currently the public key is printed (a decision which was already done by
7424 `openssl dsa -modulus' in the past) which serves a similar purpose.
7425 Additionally the NO_RSA no longer completely removes the whole -modulus
7426 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
7428 [Ralf S. Engelschall]
7430 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
7431 BIO. See the source (crypto/evp/bio_ok.c) for more info.
7432 [Arne Ansper <arne@ats.cyber.ee>]
7434 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
7435 to be added. Now both 'req' and 'ca' can use new objects defined in the
7439 *) Add cool BIO that does syslog (or event log on NT).
7440 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
7442 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
7443 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
7444 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
7445 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
7448 *) Add preliminary config info for new extension code.
7451 *) Make RSA_NO_PADDING really use no padding.
7452 [Ulf Moeller <ulf@fitug.de>]
7454 *) Generate errors when private/public key check is done.
7457 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
7458 for some CRL extensions and new objects added.
7461 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
7462 key usage extension and fuller support for authority key id.
7465 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
7466 padding method for RSA, which is recommended for new applications in PKCS
7467 #1 v2.0 (RFC 2437, October 1998).
7468 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
7469 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
7470 against Bleichbacher's attack on RSA.
7471 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
7474 *) Updates to the new SSL compression code
7475 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
7477 *) Fix so that the version number in the master secret, when passed
7478 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
7479 (because the server will not accept higher), that the version number
7480 is 0x03,0x01, not 0x03,0x00
7481 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
7483 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
7484 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
7485 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
7488 *) Support for RAW extensions where an arbitrary extension can be
7489 created by including its DER encoding. See apps/openssl.cnf for
7493 *) Make sure latest Perl versions don't interpret some generated C array
7494 code as Perl array code in the crypto/err/err_genc.pl script.
7495 [Lars Weber <3weber@informatik.uni-hamburg.de>]
7497 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
7498 not many people have the assembler. Various Win32 compilation fixes and
7499 update to the INSTALL.W32 file with (hopefully) more accurate Win32
7503 *) Modify configure script 'Configure' to automatically create crypto/date.h
7504 file under Win32 and also build pem.h from pem.org. New script
7505 util/mkfiles.pl to create the MINFO file on environments that can't do a
7506 'make files': perl util/mkfiles.pl >MINFO should work.
7509 *) Major rework of DES function declarations, in the pursuit of correctness
7510 and purity. As a result, many evil casts evaporated, and some weirdness,
7511 too. You may find this causes warnings in your code. Zapping your evil
7512 casts will probably fix them. Mostly.
7515 *) Fix for a typo in asn1.h. Bug fix to object creation script
7516 obj_dat.pl. It considered a zero in an object definition to mean
7517 "end of object": none of the objects in objects.h have any zeros
7518 so it wasn't spotted.
7519 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
7521 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
7522 Masking (CBCM). In the absence of test vectors, the best I have been able
7523 to do is check that the decrypt undoes the encrypt, so far. Send me test
7524 vectors if you have them.
7527 *) Correct calculation of key length for export ciphers (too much space was
7528 allocated for null ciphers). This has not been tested!
7531 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
7532 message is now correct (it understands "crypto" and "ssl" on its
7533 command line). There is also now an "update" option. This will update
7534 the util/ssleay.num and util/libeay.num files with any new functions.
7536 perl util/mkdef.pl crypto ssl update
7537 it will update them.
7540 *) Overhauled the Perl interface (perl/*):
7541 - ported BN stuff to OpenSSL's different BN library
7542 - made the perl/ source tree CVS-aware
7543 - renamed the package from SSLeay to OpenSSL (the files still contain
7544 their history because I've copied them in the repository)
7545 - removed obsolete files (the test scripts will be replaced
7546 by better Test::Harness variants in the future)
7547 [Ralf S. Engelschall]
7549 *) First cut for a very conservative source tree cleanup:
7550 1. merge various obsolete readme texts into doc/ssleay.txt
7551 where we collect the old documents and readme texts.
7552 2. remove the first part of files where I'm already sure that we no
7553 longer need them because of three reasons: either they are just temporary
7554 files which were left by Eric or they are preserved original files where
7555 I've verified that the diff is also available in the CVS via "cvs diff
7556 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
7557 the crypto/md/ stuff).
7558 [Ralf S. Engelschall]
7560 *) More extension code. Incomplete support for subject and issuer alt
7561 name, issuer and authority key id. Change the i2v function parameters
7562 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
7563 what that's for :-) Fix to ASN1 macro which messed up
7564 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
7567 *) Preliminary support for ENUMERATED type. This is largely copied from the
7571 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
7572 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
7574 *) Make sure `make rehash' target really finds the `openssl' program.
7575 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
7577 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
7578 like to hear about it if this slows down other processors.
7581 *) Add CygWin32 platform information to Configure script.
7582 [Alan Batie <batie@aahz.jf.intel.com>]
7584 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
7585 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
7587 *) New program nseq to manipulate netscape certificate sequences
7590 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
7594 *) Fixes to BN code. Previously the default was to define BN_RECURSION
7595 but the BN code had some problems that would cause failures when
7596 doing certificate verification and some other functions.
7597 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
7599 *) Add ASN1 and PEM code to support netscape certificate sequences.
7602 *) Add ASN1 and PEM code to support netscape certificate sequences.
7605 *) Add several PKIX and private extended key usage OIDs.
7608 *) Modify the 'ca' program to handle the new extension code. Modify
7609 openssl.cnf for new extension format, add comments.
7612 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
7613 and add a sample to openssl.cnf so req -x509 now adds appropriate
7617 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
7618 error code, add initial support to X509_print() and x509 application.
7621 *) Takes a deep breath and start addding X509 V3 extension support code. Add
7622 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
7623 stuff is currently isolated and isn't even compiled yet.
7626 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
7627 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
7628 Removed the versions check from X509 routines when loading extensions:
7629 this allows certain broken certificates that don't set the version
7630 properly to be processed.
7633 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
7634 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
7635 can still be regenerated with "make depend".
7638 *) Spelling mistake in C version of CAST-128.
7639 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
7641 *) Changes to the error generation code. The perl script err-code.pl
7642 now reads in the old error codes and retains the old numbers, only
7643 adding new ones if necessary. It also only changes the .err files if new
7644 codes are added. The makefiles have been modified to only insert errors
7645 when needed (to avoid needlessly modifying header files). This is done
7646 by only inserting errors if the .err file is newer than the auto generated
7647 C file. To rebuild all the error codes from scratch (the old behaviour)
7648 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
7649 or delete all the .err files.
7652 *) CAST-128 was incorrectly implemented for short keys. The C version has
7653 been fixed, but is untested. The assembler versions are also fixed, but
7654 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
7655 to regenerate it if needed.
7656 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
7657 Hagino <itojun@kame.net>]
7659 *) File was opened incorrectly in randfile.c.
7660 [Ulf Möller <ulf@fitug.de>]
7662 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
7663 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
7664 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
7665 al: it's just almost always a UTCTime. Note this patch adds new error
7666 codes so do a "make errors" if there are problems.
7669 *) Correct Linux 1 recognition in config.
7670 [Ulf Möller <ulf@fitug.de>]
7672 *) Remove pointless MD5 hash when using DSA keys in ca.
7673 [Anonymous <nobody@replay.com>]
7675 *) Generate an error if given an empty string as a cert directory. Also
7676 generate an error if handed NULL (previously returned 0 to indicate an
7677 error, but didn't set one).
7678 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
7680 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
7683 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
7684 parameters. This was causing a warning which killed off the Win32 compile.
7687 *) Remove C++ style comments from crypto/bn/bn_local.h.
7688 [Neil Costigan <neil.costigan@celocom.com>]
7690 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
7691 based on a text string, looking up short and long names and finally
7692 "dot" format. The "dot" format stuff didn't work. Added new function
7693 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
7694 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
7695 OID is not part of the table.
7698 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
7699 X509_LOOKUP_by_alias().
7702 *) Sort openssl functions by name.
7705 *) Get the gendsa program working (hopefully) and add it to app list. Remove
7706 encryption from sample DSA keys (in case anyone is interested the password
7710 *) Make _all_ *_free functions accept a NULL pointer.
7711 [Frans Heymans <fheymans@isaserver.be>]
7713 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
7715 [Anonymous <nobody@replay.com>]
7717 *) s_server should send the CAfile as acceptable CAs, not its own cert.
7718 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
7720 *) Don't blow it for numeric -newkey arguments to apps/req.
7721 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
7723 *) Temp key "for export" tests were wrong in s3_srvr.c.
7724 [Anonymous <nobody@replay.com>]
7726 *) Add prototype for temp key callback functions
7727 SSL_CTX_set_tmp_{rsa,dh}_callback().
7730 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
7731 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
7734 *) X509_name_add_entry() freed the wrong thing after an error.
7735 [Arne Ansper <arne@ats.cyber.ee>]
7737 *) rsa_eay.c would attempt to free a NULL context.
7738 [Arne Ansper <arne@ats.cyber.ee>]
7740 *) BIO_s_socket() had a broken should_retry() on Windoze.
7741 [Arne Ansper <arne@ats.cyber.ee>]
7743 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
7744 [Arne Ansper <arne@ats.cyber.ee>]
7746 *) Make sure the already existing X509_STORE->depth variable is initialized
7747 in X509_STORE_new(), but document the fact that this variable is still
7748 unused in the certificate verification process.
7749 [Ralf S. Engelschall]
7751 *) Fix the various library and apps files to free up pkeys obtained from
7752 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
7755 *) Fix reference counting in X509_PUBKEY_get(). This makes
7756 demos/maurice/example2.c work, amongst others, probably.
7757 [Steve Henson and Ben Laurie]
7759 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
7760 `openssl' and second, the shortcut symlinks for the `openssl <command>'
7761 are no longer created. This way we have a single and consistent command
7762 line interface `openssl <command>', similar to `cvs <command>'.
7763 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
7765 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
7766 BIT STRING wrapper always have zero unused bits.
7769 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
7772 *) Make the top-level INSTALL documentation easier to understand.
7775 *) Makefiles updated to exit if an error occurs in a sub-directory
7776 make (including if user presses ^C) [Paul Sutton]
7778 *) Make Montgomery context stuff explicit in RSA data structure.
7781 *) Fix build order of pem and err to allow for generated pem.h.
7784 *) Fix renumbering bug in X509_NAME_delete_entry().
7787 *) Enhanced the err-ins.pl script so it makes the error library number
7788 global and can add a library name. This is needed for external ASN1 and
7789 other error libraries.
7792 *) Fixed sk_insert which never worked properly.
7795 *) Fix ASN1 macros so they can handle indefinite length construted
7796 EXPLICIT tags. Some non standard certificates use these: they can now
7800 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
7801 into a single doc/ssleay.txt bundle. This way the information is still
7802 preserved but no longer messes up this directory. Now it's new room for
7803 the new set of documenation files.
7804 [Ralf S. Engelschall]
7806 *) SETs were incorrectly DER encoded. This was a major pain, because they
7807 shared code with SEQUENCEs, which aren't coded the same. This means that
7808 almost everything to do with SETs or SEQUENCEs has either changed name or
7809 number of arguments.
7810 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
7812 *) Fix test data to work with the above.
7815 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
7816 was already fixed by Eric for 0.9.1 it seems.
7817 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
7819 *) Autodetect FreeBSD3.
7822 *) Fix various bugs in Configure. This affects the following platforms:
7826 unixware-2.0-pentium
7830 *) Eliminate generated files from CVS. Reorder tests to regenerate files
7831 before they are needed.
7834 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
7838 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
7840 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
7841 changed SSLeay to OpenSSL in version strings.
7842 [Ralf S. Engelschall]
7844 *) Some fixups to the top-level documents.
7847 *) Fixed the nasty bug where rsaref.h was not found under compile-time
7848 because the symlink to include/ was missing.
7849 [Ralf S. Engelschall]
7851 *) Incorporated the popular no-RSA/DSA-only patches
7852 which allow to compile a RSA-free SSLeay.
7853 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
7855 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
7856 when "ssleay" is still not found.
7857 [Ralf S. Engelschall]
7859 *) Added more platforms to Configure: Cray T3E, HPUX 11,
7860 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
7862 *) Updated the README file.
7863 [Ralf S. Engelschall]
7865 *) Added various .cvsignore files in the CVS repository subdirs
7866 to make a "cvs update" really silent.
7867 [Ralf S. Engelschall]
7869 *) Recompiled the error-definition header files and added
7870 missing symbols to the Win32 linker tables.
7871 [Ralf S. Engelschall]
7873 *) Cleaned up the top-level documents;
7874 o new files: CHANGES and LICENSE
7875 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
7876 o merged COPYRIGHT into LICENSE
7877 o removed obsolete TODO file
7878 o renamed MICROSOFT to INSTALL.W32
7879 [Ralf S. Engelschall]
7881 *) Removed dummy files from the 0.9.1b source tree:
7882 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
7883 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
7884 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
7885 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
7886 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
7887 [Ralf S. Engelschall]
7889 *) Added various platform portability fixes.
7892 *) The Genesis of the OpenSSL rpject:
7893 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
7894 Young and Tim J. Hudson created while they were working for C2Net until
7896 [The OpenSSL Project]
7899 Changes between 0.9.0b and 0.9.1b [not released]
7901 *) Updated a few CA certificates under certs/
7904 *) Changed some BIGNUM api stuff.
7907 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
7908 DGUX x86, Linux Alpha, etc.
7911 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
7912 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
7916 *) Add -strparse option to asn1pars program which parses nested
7918 [Dr Stephen Henson <shenson@bigfoot.com>]
7920 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
7923 *) DSA fix for "ca" program.
7926 *) Added "-genkey" option to "dsaparam" program.
7929 *) Added RIPE MD160 (rmd160) message digest.
7932 *) Added -a (all) option to "ssleay version" command.
7935 *) Added PLATFORM define which is the id given to Configure.
7938 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
7941 *) Extended the ASN.1 parser routines.
7944 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
7947 *) Added a BN_CTX to the BN library.
7950 *) Fixed the weak key values in DES library
7953 *) Changed API in EVP library for cipher aliases.
7956 *) Added support for RC2/64bit cipher.
7959 *) Converted the lhash library to the crypto/mem.c functions.
7962 *) Added more recognized ASN.1 object ids.
7965 *) Added more RSA padding checks for SSL/TLS.
7968 *) Added BIO proxy/filter functionality.
7971 *) Added extra_certs to SSL_CTX which can be used
7972 send extra CA certificates to the client in the CA cert chain sending
7973 process. It can be configured with SSL_CTX_add_extra_chain_cert().
7976 *) Now Fortezza is denied in the authentication phase because
7977 this is key exchange mechanism is not supported by SSLeay at all.
7980 *) Additional PKCS1 checks.
7983 *) Support the string "TLSv1" for all TLS v1 ciphers.
7986 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
7987 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
7990 *) Fixed a few memory leaks.
7993 *) Fixed various code and comment typos.
7996 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
7997 bytes sent in the client random.
7998 [Edward Bishop <ebishop@spyglass.com>]
projects / openssl.git / blob