--- /dev/null
+=pod
+
+=head1 NAME
+
+CTLOG_STORE_get0_log_by_id -
+Get a Certificate Transparency log from a CTLOG_STORE
+
+=head1 SYNOPSIS
+
+ #include <openssl/ct.h>
+
+ const CTLOG *CTLOG_STORE_get0_log_by_id(const CTLOG_STORE *store,
+ const uint8_t *log_id,
+ size_t log_id_len);
+
+=head1 DESCRIPTION
+
+A Signed Certificate Timestamp (SCT) identifies the Certificate Transparency
+(CT) log that issued it using the log's LogID (see RFC 6962, Section 3.2).
+Therefore, it is useful to be able to look up more information about a log
+(e.g. its public key) using this LogID.
+
+B<CTLOG_STORE_get0_log_by_id>() provides a way to do this. It will find a CTLOG
+in a CTLOG_STORE that has a given LogID.
+
+=head1 RETURN VALUES
+
+B<CTLOG_STORE_get0_log_by_id> returns a CTLOG with the given LogID, if it
+exists in the given CTLOG_STORE, otherwise it returns NULL.
+
+=head1 SEE ALSO
+
+L<ct(3)>,
+L<CTLOG_STORE_new(3)>
+
+=head1 COPYRIGHT
+
+Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
+
+Licensed under the OpenSSL license (the "License"). You may not use
+this file except in compliance with the License. You can obtain a copy
+in the file LICENSE in the source distribution or at
+L<https://www.openssl.org/source/license.html>.
+
+=cut
\ No newline at end of file
--- /dev/null
+=pod
+
+=head1 NAME
+
+CTLOG_STORE_new, CTLOG_STORE_free,
+CTLOG_STORE_load_default_file, CTLOG_STORE_load_file -
+Create and populate a Certificate Transparency log list
+
+=head1 SYNOPSIS
+
+ #include <openssl/ct.h>
+
+ CTLOG_STORE *CTLOG_STORE_new(void);
+ void CTLOG_STORE_free(CTLOG_STORE *store);
+
+ int CTLOG_STORE_load_default_file(CTLOG_STORE *store);
+ int CTLOG_STORE_load_file(CTLOG_STORE *store, const char *file);
+
+=head1 DESCRIPTION
+
+A CTLOG_STORE is a container for a list of CTLOGs (Certificate Transparency
+logs). The list can be loaded from one or more files and then searched by LogID
+(see RFC 6962, Section 3.2, for the definition of a LogID).
+
+B<CTLOG_STORE_new>() creates an empty list of CT logs. This is then populated
+by B<CTLOG_STORE_load_default_file>() or B<CTLOG_STORE_load_file>().
+B<CTLOG_STORE_load_default_file>() loads from the default file, which is named
+"ct_log_list.cnf" in the OpenSSL install directory. This can be overridden using
+an environment variable named "CTLOG_FILE".
+B<CTLOG_STORE_load_file>() loads from a caller-specified file path instead.
+Both of these functions append any loaded CT logs to the CTLOG_STORE.
+
+The expected format of the file is:
+
+ enabled_logs=foo,bar
+
+ [foo]
+ description = Log 1
+ key = <base64-encoded public key here>
+
+ [bar]
+ description = Log 2
+ key = <base64-encoded public key here>
+
+Once a CTLOG_STORE is no longer required, it should be passed to
+B<CTLOG_STORE_free>(). This will delete all of the CTLOGs stored within, along
+with the CTLOG_STORE itself.
+
+=head1 NOTES
+
+If there are any invalid CT logs in a file, they are skipped and the remaining
+valid logs will still be added to the CTLOG_STORE. A CT log will be considered
+invalid if it is missing a "key" or "description" field.
+
+=head1 RETURN VALUES
+
+Both B<CTLOG_STORE_load_default_file> and B<CTLOG_STORE_load_file> return 1 if
+all CT logs in the file are successfully parsed and loaded, 0 otherwise.
+
+=head1 SEE ALSO
+
+L<ct(3)>,
+L<CTLOG_STORE_get0_log_by_id(3)>,
+L<SSL_CTX_set_ctlog_list_file(3)>
+
+=head1 COPYRIGHT
+
+Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
+
+Licensed under the OpenSSL license (the "License"). You may not use
+this file except in compliance with the License. You can obtain a copy
+in the file LICENSE in the source distribution or at
+L<https://www.openssl.org/source/license.html>.
+
+=cut
\ No newline at end of file
--- /dev/null
+=pod
+
+=head1 NAME
+
+Func -
+title
+
+=head1 SYNOPSIS
+
+ #include <openssl/ct.h>
+
+ CTLOG *CTLOG_new(EVP_PKEY *public_key, const char *name);
+ CTLOG *CTLOG_new_null(void);
+ int CTLOG_new_from_base64(CTLOG ** ct_log,
+ const char *pkey_base64, const char *name);
+ void CTLOG_free(CTLOG *log);
+ const char *CTLOG_get0_name(const CTLOG *log);
+ void CTLOG_get0_log_id(const CTLOG *log, const uint8_t **log_id,
+ size_t *log_id_len);
+ EVP_PKEY *CTLOG_get0_public_key(const CTLOG *log);
+
+=head1 DESCRIPTION
+
+
+
+=head1 NOTES
+
+
+
+=head1 RETURN VALUES
+
+
+
+=head1 SEE ALSO
+
+L<ct(3)>
+
+=head1 COPYRIGHT
+
+Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
+
+Licensed under the OpenSSL license (the "License"). You may not use
+this file except in compliance with the License. You can obtain a copy
+in the file LICENSE in the source distribution or at
+L<https://www.openssl.org/source/license.html>.
+
+=cut
\ No newline at end of file
--- /dev/null
+=pod
+
+=head1 NAME
+
+CT_POLICY_EVAL_CTX -
+Encapsulates the data required to evaluate whether SCTs meet a Certificate Transparency policy
+
+=head1 SYNOPSIS
+
+ #include <openssl/ct.h>
+
+ CT_POLICY_EVAL_CTX *CT_POLICY_EVAL_CTX_new(void);
+ void CT_POLICY_EVAL_CTX_free(CT_POLICY_EVAL_CTX *ctx);
+ X509* CT_POLICY_EVAL_CTX_get0_cert(const CT_POLICY_EVAL_CTX *ctx);
+ void CT_POLICY_EVAL_CTX_set0_cert(CT_POLICY_EVAL_CTX *ctx, X509 *cert);
+ X509* CT_POLICY_EVAL_CTX_get0_issuer(const CT_POLICY_EVAL_CTX *ctx);
+ void CT_POLICY_EVAL_CTX_set0_issuer(CT_POLICY_EVAL_CTX *ctx, X509 *issuer);
+ const CTLOG_STORE *CT_POLICY_EVAL_CTX_get0_log_store(const CT_POLICY_EVAL_CTX *ctx);
+ void CT_POLICY_EVAL_CTX_set0_log_store(CT_POLICY_EVAL_CTX *ctx, CTLOG_STORE *log_store);
+
+=head1 DESCRIPTION
+
+A B<CT_POLICY_EVAL_CTX> is used by functions that evaluate whether Signed
+Certificate Timestamps (SCTs) fulfil a Certificate Transparency (CT) policy.
+This policy may be, for example, that at least one valid SCT is available. To
+determine this, an SCT's signature must be verified. This requires:
+
+=over
+
+=item * the public key of the log that issued the SCT
+
+=item * the certificate that the SCT was issued for
+
+=item * the issuer certificate (if the SCT was issued for a pre-certificate)
+
+=back
+
+The above requirements are met using the setters described below.
+
+B<CT_POLICY_EVAL_CTX_new>() creates an empty policy evaluation context. This
+should then be populated using:
+
+=over
+
+=item * B<CT_POLICY_EVAL_CTX_set0_cert>() to provide the certificate the SCTs were issued for
+
+=item * B<CT_POLICY_EVAL_CTX_set0_issuer>() to provide the issuer certificate
+
+=item * B<CT_POLICY_EVAL_CTX_set0_log_store>() to provide a list of logs that are trusted as sources of SCTs
+
+=back
+
+None of these setters take ownership of the pointers passed to them.
+Each setter has a matching getter for accessing the current value.
+The getters do not transfer ownership either.
+
+When no longer required, the B<CT_POLICY_EVAL_CTX> should be passed to
+B<CT_POLICY_EVAL_CTX_free>() to delete it.
+
+=head1 NOTES
+
+The issuer certificate only needs to be provided if at least one of the SCTs
+was issued for a pre-certificate. This will be the case for SCTs embedded in a
+certificate (i.e. those in an X.509 extension), but may not be the case for SCTs
+found in the TLS SCT extension or OCSP response.
+
+=head1 RETURN VALUES
+
+B<CT_POLICY_EVAL_CTX_new>() will return NULL if malloc fails.
+
+=head1 SEE ALSO
+
+L<ct(3)>
+
+=head1 COPYRIGHT
+
+Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
+
+Licensed under the OpenSSL license (the "License"). You may not use
+this file except in compliance with the License. You can obtain a copy
+in the file LICENSE in the source distribution or at
+L<https://www.openssl.org/source/license.html>.
+
+=cut
\ No newline at end of file
--- /dev/null
+=pod
+
+=head1 NAME
+
+SCT - A Certificate Transparency Signed Certificate Timestamp
+
+=head1 SYNOPSIS
+
+ #include <openssl/ct.h>
+
+ SCT *SCT_new(void);
+ SCT *SCT_new_from_base64(unsigned char version,
+ const char *logid_base64,
+ ct_log_entry_type_t entry_type,
+ uint64_t timestamp,
+ const char *extensions_base64,
+ const char *signature_base64);
+
+ void SCT_free(SCT *sct);
+ void SCT_LIST_free(STACK_OF(SCT) *a);
+
+ sct_version_t SCT_get_version(const SCT *sct);
+ int SCT_set_version(SCT *sct, sct_version_t version);
+
+ ct_log_entry_type_t SCT_get_log_entry_type(const SCT *sct);
+ int SCT_set_log_entry_type(SCT *sct, ct_log_entry_type_t entry_type);
+
+ size_t SCT_get0_log_id(const SCT *sct, unsigned char **log_id);
+ int SCT_set0_log_id(SCT *sct, unsigned char *log_id, size_t log_id_len);
+ int SCT_set1_log_id(SCT *sct, const unsigned char *log_id, size_t log_id_len);
+
+ uint64_t SCT_get_timestamp(const SCT *sct);
+ void SCT_set_timestamp(SCT *sct, uint64_t timestamp);
+
+ int SCT_get_signature_nid(const SCT *sct);
+ int SCT_set_signature_nid(SCT *sct, int nid);
+
+ size_t SCT_get0_extensions(const SCT *sct, unsigned char **ext);
+ void SCT_set0_extensions(SCT *sct, unsigned char *ext, size_t ext_len);
+ int SCT_set1_extensions(SCT *sct, const unsigned char *ext, size_t ext_len);
+
+ size_t SCT_get0_signature(const SCT *sct, unsigned char **sig);
+ void SCT_set0_signature(SCT *sct, unsigned char *sig, size_t sig_len);
+ int SCT_set1_signature(SCT *sct, const unsigned char *sig, size_t sig_len);
+
+ sct_source_t SCT_get_source(const SCT *sct);
+ int SCT_set_source(SCT *sct, sct_source_t source);
+
+=head1 DESCRIPTION
+
+Signed Certificate Timestamps (SCTs) are defined by RFC 6962, Section 3.2.
+They constitute a promise by a Certificate Transparency (CT) log to publicly
+record a certificate. By cryptographically verifying that a log did indeed issue
+an SCT, some confidence can be gained that the certificate is publicly known.
+
+An internal representation of an SCT can be created in one of two ways.
+The first option is to create a blank SCT, using B<SCT_new>(), and then populate
+it using:
+
+=over
+
+=item * B<SCT_set_version>() to set the SCT version.
+
+Only SCT_VERSION_V1 is currently supported.
+
+=item * B<SCT_set_log_entry_type>() to set the type of certificate the SCT was issued for:
+
+B<CT_LOG_ENTRY_TYPE_X509> for a normal certificate.
+B<CT_LOG_ENTRY_TYPE_PRECERT> for a pre-certificate.
+
+=item * B<SCT_set0_log_id>() or B<SCT_set1_log_id>() to set the LogID of the CT log that the SCT came from.
+
+The former takes ownership, whereas the latter makes a copy.
+See RFC 6962, Section 3.2 for the definition of LogID.
+
+=item * B<SCT_set_timestamp>() to set the time the SCT was issued (epoch time in milliseconds).
+
+=item * B<SCT_set_signature_nid>() to set the NID of the signature.
+
+=item * B<SCT_set0_signature>() or B<SCT_set1_signature>() to set the signature itself.
+
+The former takes ownership, whereas the latter makes a copy.
+
+=item * B<SCT_set0_extensions>() or B<SCT_set1_extensions> to provide SCT extensions.
+
+The former takes ownership, whereas the latter makes a copy.
+
+=back
+
+Alternatively, the SCT can be pre-populated from the following data using
+B<SCT_new_from_base64>():
+
+=over
+
+=item * The SCT version (only SCT_VERSION_V1 is currently supported).
+
+=item * The LogID (see RFC 6962, Section 3.2), base64 encoded.
+
+=item * The type of certificate the SCT was issued for:
+
+B<CT_LOG_ENTRY_TYPE_X509> for a normal certificate.
+B<CT_LOG_ENTRY_TYPE_PRECERT> for a pre-certificate.
+
+=item * The time that the SCT was issued (epoch time in milliseconds).
+
+=item * The SCT extensions, base64 encoded.
+
+=item * The SCT signature, base64 encoded.
+
+=back
+
+B<SCT_set_source>() can be used to record where the SCT was found
+(TLS extension, X.509 certificate extension or OCSP response). This is not
+required for verifying the SCT.
+
+=head1 NOTES
+
+Some of the setters return int, instead of void. These will all return 1 on
+success, 0 on failure. They will not make changes on failure.
+
+Most of the setters will reset the validation status of the SCT to
+SCT_VALIDATION_STATUS_NOT_SET (see L<SCT_verify(3)>).
+
+B<SCT_set_source>() will call B<SCT_set_log_entry_type>() if the type of
+certificate the SCT was issued for can be inferred from where the SCT was found.
+For example, an SCT found in an X.509 extension must have been issued for a pre-
+certificate.
+
+B<SCT_set_source>() will not refuse unknown values.
+
+=head1 RETURN VALUES
+
+B<SCT_set_version>() returns 1 if the specified version is supported, 0 otherwise.
+
+B<SCT_set_log_entry_type>() returns 1 if the specified log entry type is supported, 0 otherwise.
+
+B<SCT_set0_log_id>() and B<SCT_set1_log_id> return 1 if the specified LogID is a
+valid SHA-256 hash, 0 otherwise. Aditionally, B<SCT_set1_log_id> returns 0 if
+malloc fails.
+
+B<SCT_set_signature_nid> returns 1 if the specified NID is supported, 0 otherwise.
+
+B<SCT_set1_extensions> and B<SCT_set1_signature> return 1 if the supplied buffer
+is copied successfully, 0 otherwise (i.e. if malloc fails).
+
+B<SCT_set_source> will always return 1.
+
+=head1 SEE ALSO
+
+L<ct(3)>,
+L<SCT_verify(3)>,
+L<OBJ_nid2obj(3)>
+
+=head1 COPYRIGHT
+
+Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
+
+Licensed under the OpenSSL license (the "License"). You may not use
+this file except in compliance with the License. You can obtain a copy
+in the file LICENSE in the source distribution or at
+L<https://www.openssl.org/source/license.html>.
+
+=cut
--- /dev/null
+=pod
+
+=head1 NAME
+
+SCT_print, SCL_LIST_print, SCT_validation_status_string -
+Prints Signed Certificate Timestamps in a human-readable way
+
+=head1 SYNOPSIS
+
+ #include <openssl/ct.h>
+
+ void SCT_print(const SCT *sct, BIO *out, int indent, const CTLOG_STORE *logs);
+ void SCT_LIST_print(const STACK_OF(SCT) *sct_list, BIO *out, int indent,
+ const char *separator, const CTLOG_STORE *logs);
+ const char *SCT_validation_status_string(const SCT *sct);
+
+=head1 DESCRIPTION
+
+B<SCT_print> prints a single Signed Certificate Timestamp (SCT) to a L<bio> in
+a human-readable format. B<SCT_LIST_print> prints an entire list of SCTs in a
+similar way. A separator can be specified to delimit each SCT in the output.
+
+The output can be indented by a specified number of spaces. If a B<CTLOG_STORE>
+is provided, it will be used to print the description of the CT log that issued
+each SCT (if that log is in the CTLOG_STORE). Alternatively, NULL can be passed
+as the CTLOG_STORE parameter to disable this feature.
+
+B<SCT_validation_status_string> will return the validation status of an SCT as
+a human-readable string. Call L<SCT_validate> or B<SCT_LIST_validate> beforehand
+in order to set the validation status of an SCT first.
+
+=head1 SEE ALSO
+
+L<ct(3)>,
+L<bio(3)>,
+L<CTLOG_STORE_new(3)>,
+L<SCT_validate(3)>
+
+=head1 COPYRIGHT
+
+Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
+
+Licensed under the OpenSSL license (the "License"). You may not use
+this file except in compliance with the License. You can obtain a copy
+in the file LICENSE in the source distribution or at
+L<https://www.openssl.org/source/license.html>.
+
+=cut
\ No newline at end of file
--- /dev/null
+=pod
+
+=head1 NAME
+
+SCT_validate, SCT_LIST_validate, SCT_get_validation_status -
+checks Signed Certificate Timestamps meet a Certificate Transparency policy
+
+=head1 SYNOPSIS
+
+ #include <openssl/ct.h>
+
+ sct_validation_status_t SCT_get_validation_status(const SCT *sct);
+ int SCT_validate(SCT *sct, const CT_POLICY_EVAL_CTX *ctx);
+ int SCT_LIST_validate(const STACK_OF(SCT) *scts, CT_POLICY_EVAL_CTX *ctx);
+
+=head1 DESCRIPTION
+
+
+
+=head1 NOTES
+
+
+
+=head1 RETURN VALUES
+
+
+
+=head1 SEE ALSO
+
+L<ct(3)>
+
+=head1 COPYRIGHT
+
+Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
+
+Licensed under the OpenSSL license (the "License"). You may not use
+this file except in compliance with the License. You can obtain a copy
+in the file LICENSE in the source distribution or at
+L<https://www.openssl.org/source/license.html>.
+
+=cut
\ No newline at end of file
--- /dev/null
+=pod
+
+=head1 NAME
+
+SCT_verify, SCT_verify_v1 -
+verifies a Signed Certificate Timestamp's signature
+
+=head1 SYNOPSIS
+
+ #include <openssl/ct.h>
+
+ int SCT_verify(const SCT_CTX *sctx, const SCT *sct);
+ int SCT_verify_v1(SCT *sct, X509 *cert, X509 *preissuer, X509_PUBKEY *log_pubkey, X509 *issuer_cert);
+
+=head1 DESCRIPTION
+
+
+
+=head1 NOTES
+
+
+
+=head1 RETURN VALUES
+
+
+
+=head1 SEE ALSO
+
+L<ct(3)>
+
+=head1 COPYRIGHT
+
+Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
+
+Licensed under the OpenSSL license (the "License"). You may not use
+this file except in compliance with the License. You can obtain a copy
+in the file LICENSE in the source distribution or at
+L<https://www.openssl.org/source/license.html>.
+
+=cut
\ No newline at end of file
--- /dev/null
+=pod
+
+=head1 NAME
+
+ct - Certificate Transparency
+
+=head1 SYNOPSIS
+
+ #include <openssl/ct.h>
+
+=head1 DESCRIPTION
+
+This library implements Certificate Transparency (CT) verification for TLS
+clients, as defined in RFC 6962. This verification can provide some confidence
+that a certificate has been publicly logged in a set of CT logs.
+
+By default, these checks are disabled. They can be enabled using
+B<SSL_CTX_ct_enable>() or B<SSL_ct_enable>().
+
+This library can also be used to parse and examine CT data structures, such as
+Signed Certificate Timestamps (SCTs), or to read a list of CT logs. There are
+functions for:
+- decoding and encoding SCTs in DER and TLS wire format.
+- printing SCTs.
+- verifying the authenticity of SCTs.
+- loading a CT log list from a CONF file.
+
+=head1 SEE ALSO
+
+L<d2i_SCT_LIST(3)>,
+L<CTLOG_STORE_new(3)>,
+L<CTLOG_STORE_get0_log_by_id(3),
+L<SCT_new(3)>,
+L<SCT_print(3)>,
+L<SCT_verify(3)>,
+L<SCT_validate(3)>,
+L<CT_POLICY_EVAL_CTX(3)>,
+L<SSL_CTX_set_ct_validation_callback(3)>
+
+=cut
--- /dev/null
+=pod
+
+=head1 NAME
+
+d2i_SCT_LIST, i2d_SCT_LIST -
+decode and encode Signed Certificate Timestamp lists in DER format
+
+=head1 SYNOPSIS
+
+ #include <openssl/ct.h>
+
+ STACK_OF(SCT) *d2i_SCT_LIST(STACK_OF(SCT) **a, const unsigned char **pp, long len);
+ int i2d_SCT_LIST(const STACK_OF(SCT) *a, unsigned char **pp);
+
+=head1 DESCRIPTION
+
+
+
+=head1 NOTES
+
+
+
+=head1 RETURN VALUES
+
+
+
+=head1 SEE ALSO
+
+L<ct(3)>,
+L(o2i_SCT_LIST(3)>
+
+=head1 COPYRIGHT
+
+Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
+
+Licensed under the OpenSSL license (the "License"). You may not use
+this file except in compliance with the License. You can obtain a copy
+in the file LICENSE in the source distribution or at
+L<https://www.openssl.org/source/license.html>.
+
+=cut
\ No newline at end of file
--- /dev/null
+=pod
+
+=head1 NAME
+
+o2i_SCT_LIST, i2o_SCT_LIST, o2i_SCT, i2o_SCT, o2i_SCT_signature, i2o_SCT_signature -
+decode and encode Signed Certificate Timestamp lists in TLS wire format
+
+=head1 SYNOPSIS
+
+ #include <openssl/ct.h>
+
+ STACK_OF(SCT) *o2i_SCT_LIST(STACK_OF(SCT) **a, const unsigned char **pp, size_t len);
+ int i2o_SCT_LIST(const STACK_OF(SCT) *a, unsigned char **pp);
+ SCT *o2i_SCT(SCT **psct, const unsigned char **in, size_t len);
+ int i2o_SCT(const SCT *sct, unsigned char **out);
+ int o2i_SCT_signature(SCT *sct, const unsigned char **in, size_t len);
+ int i2o_SCT_signature(const SCT *sct, unsigned char **out);
+
+=head1 DESCRIPTION
+
+
+
+=head1 NOTES
+
+
+
+=head1 RETURN VALUES
+
+
+
+=head1 SEE ALSO
+
+L<ct(3)>,
+L(d2i_SCT_LIST(3)>
+
+=head1 COPYRIGHT
+
+Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
+
+Licensed under the OpenSSL license (the "License"). You may not use
+this file except in compliance with the License. You can obtain a copy
+in the file LICENSE in the source distribution or at
+L<https://www.openssl.org/source/license.html>.
+
+=cut
\ No newline at end of file
(CT) logs from the default file location, "ct_log_list.cnf", found in the
directory where OpenSSL is installed.
-SSL_CTX_set_ctlog_list_file() loads a list of CT logs from a given path.
-
-The expected format of the log list file is:
-
- enabled_logs=foo,bar
-
- [foo]
- description = Log 1
- key = <base64-encoded public key here>
-
- [bar]
- description = Log 2
- key = <base64-encoded public key here>
+SSL_CTX_set_ctlog_list_file() loads a list of CT logs from a specific path.
+See L<CTLOG_STORE_new(3)> for the file format.
=head1 NOTES
These functions will not clear the existing CT log list - it will be appended
-to.
+to. To replace the existing list, use L<SSL_CTX_set0_ctlog_store> first.
If an error occurs whilst parsing a particular log entry in the file, that log
entry will be skipped.
=head1 SEE ALSO
L<ssl(3)>,
-L<ssl_ct_validation_cb(3)>
+L<SSL_CTX_set_ct_validation_callback(3)>,
+L<CTLOG_STORE_new(3)>
=head1 COPYRIGHT
=item void B<SSL_CTX_set_client_cert_cb>(SSL_CTX *ctx, int (*cb)(SSL *ssl, X509 **x509, EVP_PKEY **pkey));
+=item int B<SSL_CTX_set_ct_validation_callback>(SSL_CTX *ctx, ssl_ct_validation_cb callback, void *arg);
+
=item void B<SSL_CTX_set_default_passwd_cb>(SSL_CTX *ctx, int (*cb);(void))
=item void B<SSL_CTX_set_default_read_ahead>(SSL_CTX *ctx, int m);
=item void B<SSL_set_connect_state>(SSL *ssl);
+=item int B<SSL_set_ct_validation_callback>(SSL *ssl, ssl_ct_validation_cb callback, void *arg);
+
=item int B<SSL_set_ex_data>(SSL *ssl, int idx, char *arg);
=item int B<SSL_set_fd>(SSL *ssl, int fd);
L<SSL_CTX_use_certificate(3)>,
L<SSL_alert_type_string(3)>,
L<SSL_do_handshake(3)>,
+L<SSL_enable_ct(3)>,
L<SSL_get_SSL_CTX(3)>,
L<SSL_get_ciphers(3)>,
L<SSL_get_client_CA_list(3)>,
projects / openssl.git / commitdiff